1

Manual Dongle Driver Installation

For most users, my dongle driver wizard works well.

For some "problem" computers, it's best to use the driver tool from the company that manufactures thedongles.

Note - you will still need to run ForScore using a dongle shortcut as explained in the documentation. (Ifyou're using the procedure shown here, you may already have tried my wizard which will have created asuitable shortcut for you.)

As of version 2.20, ForScore includes the manual installation program. It will be inside the folder calledManualDongle inside the folder where you've installed ForScore.

Download the installation program from here and save it on your computer. You can also download theseinstructions as a PDF file.

You will run this program twice.

FIRST: Uninstall any existing drivers.

Run DongleManualInstall.exe. Click through the warning screen.

2

Manual Dongle Driver Installation

The driver utility will open.

3

Manual Dongle Driver Installation

Tick the Uninstall checkbox.Then click the Begin Uninstall button.

Click Yes.

4

Manual Dongle Driver Installation

Click Close.

5

Manual Dongle Driver Installation

Reboot your computer?Not everybody has found this necessary. But to be safe, it's probably a good idea to do so before going tothe next step.

SECOND: Install drivers.

Run DongleManualInstall.exe. Click through the warning screen.

Mark the KEYLOK 2(USB w/Driver) checkbox.

6

Manual Dongle Driver Installation

Click OK on the warning screen.

7

Manual Dongle Driver Installation

Then click Begin Install.

Click Next on the wizard.

Click Install on the driver security screen.

8

Manual Dongle Driver Installation

TAKE YOUR HAND OFF THE MOUSE! Wait a bit.

Then click Finish.

rev 3/30/14