frame support components

20
Frame support components

Upload: others

Post on 17-Feb-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Frame support components

Side mounting top brackets

332288 C O N V E Y O R L I N E

39

HEAVY DUTY SIDE MOUNTING TOP BRACKET

Material: reinforced polyamide. Screw, nut and washers in stainless steel AISI 304Note: the bracket can be inclined by 6° in both directions when using the lowerhole and the upper slot hole.There are two optional holes that can easily beopened by removing the thin membrane.In this way the centre distance of the holes can be:• Enlarged to 85,5 mm or• Reduced to 30 mmThen it is also possible to use an incline of 12°in both directions 60.314745

Code For tube Ø

51.593

.519

.5

20 70

200.

9

1960

121.

944.5

Ø 64

61

M 8

80

48.350.9

--

--

38x3840x40

14748N14744N1485614857

Code For tube ØFor tube Ø

n°25

n°25

Preferred type, readily available (codes marked in red)

Preferred type, readily available(codes marked in red)

48.350.9

1474814744

Code For tube Ø

AISI 304 Stainless steel

Reinforcedpolyamide

Ø

M8SIDE MOUNTING TOP BRACKETMaterial: reinforced polyamide. Screw, nut and washers in stainless steel AISI 304Note: the bracket can be inclined by 5° in both directions when using the lower hole and the upper slot hole.There are two optional holes that can easily be opened by removing the thin membrane.In this way the centre distance of the holes can be:• Enlarged to 70 mm or• Reduced to 30 mmThen it is also possible to use an incline of 10° in both directions

SIDE MOUNTING TOP BRACKETMaterial: reinforced polyamide. Screw, nut and washers in stainless steel AISI 304Note: the bracket can be inclined by 5° in both directions when using the lower hole and the upper slot hole.There are two optional holes that can easily be opened by removing the thinmembrane.In this way the centre distance of the holes can be:• Enlarged to 70 mm or• Reduced to 30 mmThen it is also possible to use an incline of 10° in both directions

Side mounting bracket

332299C O N V E Y O R L I N E

SIDE MOUNTING TOP BRACKETCode

DF For tube Ø

SIDE MOUNTING TOP BRACKET

Material: reinforced polyamide screw nut and washers in stainless steel AISI 304.

48.350.9

1410014101

CodeDF

For tube Ø

n°25

14053 48.3 n°25

Reinforcedpolyamide

Preferred type, readily available (codes marked in red)

AISI 304 Stainless steel

Side mounting top brackets

333300 C O N V E Y O R L I N E

SIDE MOUNTING TOP BRACKET with expansion plug for square tubes 40x40x2 mm

Components: external part in reinforced polyamide.Conical insert in reinforced polyamide.Threaded bushing in nickel plated brass.Bolt and washer in stainless steel.Note: max recommended tightening torque 2.5 Kgm.Application: the bracket can be inclined by 30°.

SIDE MOUNTING TOP BRACKET with expansion plug for round tubes Ø 48.3x1.5 mm

Components: external part in reinforced polyamide.Conical insert in reinforced polyamide.Threaded bushing in nickel plated brass.Bolt and washer in stainless steel.Note: max recommended tightening torque 2.5 Kgm.Application: the bracket can be inclined by 30°.

48.348.350.950.9

14071140701406814069

Code For tube Ø

8108

10

M

810

1407314072

Code M

40x4040x40

For tube Ø

Nickel plated brass

n°25

n°25

Reinforcedpolyamide

Preferred type, readily available (codes marked in red)

PATENTED

AISI 304 Stainless steel

Support heads

333311C O N V E Y O R L I N E

SUPPORT HEAD

Material: reinforced polyamide;screw, nut and washer in S/S AISI 304.Note: max recommended tightening torque 2 Kgm.

SUPPORT HEAD

Material: reinforced polyamide;screw, nut and washers in stainless steel AISI 304.Note: max. recommended tightening torque 2 Kgm.

42.448.350.960.3

14742147411474014739

Code For tube Ø

48.350.9

-

140501405114S00092

Code For tube Ø

--

40x40

For tube Ø

n°25

n°25

Reinforcedpolyamide

VG-307SQ-T40-M

Ref.

Preferred type, readily available (codes marked in red)

AISI 304 Stainless steel

Support heads

333322 C O N V E Y O R L I N E

EXTRA SUPPORT HEAD

Material: polyamide, stainless steel bolts.Note: max. recommended tightening torque 1.5 Kgm. 14052

Code

CONNECTING JOINT

Material: reinforced polyamide, screws in stainless steel AISI 304, bushings in nickel plated brass.Note: max. recommended tightening torque 1.5 Kgm.

48.348.350.960.3

14747147331473214746

CodeFor tubes ØDP1 DP2

3242.442.442.4

116122122130

A

57626265

B

40404041

C

70787882

D

74787882

E

363939

42.5

F

Nickel plated brass

Blackn°25

n°25

Reinforcedpolyamide

Preferred type, readily available (codes marked in red)

AISI 304 Stainless steel

60.3

For tube Ø

Connecting joints

333333C O N V E Y O R L I N E

M8

F

BC

E

D

A

Q2

Q1

EXTRA RIGID CONNECTING JOINT

Material: reinforced polyamide, screws and nuts in stainless steel AISI 304.Note: max. recommended tightening torque 1.5 Kgm.

M8

C

E

D

A

DP2 F

B

DP1

CONNECTING JOINT

Material: reinforced polyamide, screws and nuts in stainless steel AISI 304.Note: max. recommended tightening torque 1.5 Kgm.

42.4

48.3

50.9

60.3

134

134

146

146

68

68

80

80

86

86

98

98

45

45

51

51

60

60

60

60

3

3

3

3

14729147341472614725147241474314737147231472214738

CodeFor round tubes ØDP1 DP2

42.442.448.342.448.350.942.448.350.960.3

A B C D E F

404550

147191472014721

CodeFor square tubes

Q1 Q2

404550

134146146

A

688080

B

869898

C

455151

D

60

E

3

F

n°25

n°25

n°25

n°25

n°25

Reinforcedpolyamide

Preferred type, readily available (codes marked in red)

AISI 304 Stainless steel

Connecting joints

333344 C O N V E Y O R L I N E

CONNECTING JOINT

Material: reinforced polyamide, screws and nuts in stainless steel AISI 304.Note: max. recommended tightening torque 1.5 Kgm.

69

Ø64

DP1

32

20

80.5

DP8

Ø6412

1.5

4M8

M84

50

Ø9

4

M8

Ø9

Ø65 Ø 101

81 47.5

102.5

12 48 32.5

CONNECTING JOINT

Material: reinforced polyamide, screws and nuts in stainless steel AISI 304.Note: max. recommended tightening torque 1.5 Kgm.

Reinforcedpolyamide

1404014041

Code

48.350.9

For tube Ø

n°25

1404214043

Code

48.350.9

For tube Ø

n°25

Preferred type, readily available (codes marked in red)

AISI 304 Stainless steel

333355C O N V E Y O R L I N E

Connecting joints

46

Ø

95

141

35Ø 10.5

110

ØCONNECTING JOINT

Thickness: S = 2 mm.Surface: tumbling finish.Use: with tubes Ø 60.3 mm.Note: the connecting joints supplied without screws.

127.5

3.4839

1.38Ø10.5

100

ØØCONNECTING JOINT

Thickness: S = 2 mm.Surface: tumbling finish.Use: with tubes Ø 48.3 mm.Note: the connecting joint is supplied without screws.

Ø11

25

40 12

Ø

CONNECTING JOINT

Thickness: S = 2.5 mm.Surface: tumbling finish.Use: with tubes Ø 48.3 mm and flat bar 25x8 mm.Note: the connecting joints is supplied without screws.

13827

Code

48.3

For tube Ø

60.313828

Code For tube Ø

13981

Code

48.3

For tube Ø

25 x 8

Flat bar

SS AISI 304n°25

SS AISI 304n°25

SS AISI 304n°50

Preferred type, readily available (codes marked in red)

AISI 304 Stainless steel

333366 C O N V E Y O R L I N E

Connecting joints

KNUCKLE JOINT FOR TUBE Ø 32 mm

Material: reinforced polyamide;screws and nut is stainless steel AISI 304Application: with connecting joint code 14747 and tube Ø 32 mm, 1,5 wall.Supply: assembled.

CONNECTING JOINT

Components and material:• Conical bushing in nickel plated brass.• Expansion plug in reinforced polyamide.• Adaptor plug in reinforced polyamide.• Screw M8x50 in stainless steel.• Closing cap in polyamide.Use: these joints connect different tubes at different angles.Special design provides a simple method of joining tubes for maximum cleanliness.Note: tube deformation occurs with a tightening torque of 2.5 Kgm thus preventingaccidental unscrewing of the plug due tostructure vibrations.

14736

Code

• application with any thickness.

3842.442.448.348.360.3

–11/4

11/4

11/2

11/2

2

••••••

3838

42.438

42.442.4

––

11/4

–11/4

11/4

1.51.51.51.51.51.5

434347434747

148151481614817148181481914821

Code mm inch. mm mm inch. mmH

mm

3234.234.237.237.243.2

Kmm

Ext. Ø D1 Wall S1 Ext. Ø D2 Wall S2Tube N°1 Tube N°2

Nickel plated brass

n°50

Reinforcedpolyamide

AISI 304 Stainless steel

333377C O N V E Y O R L I N E

Expansion plugs for round tubes

EXPANSION PLUG

Components and material:External part in reinforced polyamide.Conical insert available in two materials:- version in nickel plated brass;- version in polyamide with nut;Notes: bolt and washer are not included.Technical information:- Version with nickel plated brass insert:

max. load for removal Kgf 420 (static conditions).

- Version with polyamide insert:max. load for removal Kgf 350 (static conditions).

140031400414005140061401814017

108

108

108

3838

44.544.548.548.5

414141415050

34.834.839.239.244.744.7

3838

42.442.448.348.3

3535

39.439.445.345.3

1.5

14001140021474914753––

Code

Version with brass bush

Version with polyamide bush

Dimensions mm Tube dimensions

M A B C Ext. Ø Int. Ø Wall

Nickel plated brass

BlackBlack

1435214353

Code Colour

810

M

20 x 1.520 x 1.5

For round tube

EXPANSION PLUGfor round tubes

Components:External part in reinforced polyamide.Conical insert in nickel plated brass.Technical information:Max. load for removal Kgf 300 (static conditions).

n°50

n°50

Reinforcedpolyamide

Preferred type, readily available (codes marked in red)

333388 C O N V E Y O R L I N E

Expansions plug for square tubes

EXPANSION PLUG for square tubes40x40x2 20x20

Components and material:External part in reinforced polyamide.Conical insert in nickel plated brass with polyamide.Technical information:tube 40x40max. load for removal Kgf 400 (static conditions).Tube 20x20 max. load for removal Kgf 300 (static conditions).Supply: assembled.

6666

1010

140191402014021140221401514016

Code S

8108

108

10

M

20x2020x2020x2020x2040x4040x40

A

363636365757

B

17171616

35.535.5

C

20x2020x2020x2020x2040x4040x40

Ext.

171716163636

Int.

1.51.52222

WallDimensions mm Tube dimension

Nickel plated brass

n°50

Reinforcedpolyamide

Preferred type, readily available (codes marked in red)

333399C O N V E Y O R L I N E

Threaded tube ends for round tubes

FOR FURTHER INFORMATIONABOUT THIS LINE PLEASE

CONSULT THE PRESSO-LINECATALOGUE.

TYPE 2

TYPE 1

M10M12M14M10M12M14M16M10M12M14M16M20M12M14M16M20M12M14M16M20M14M16M20M16M20M16M20M16M20M24

147991480014801147731475214774147641477514763147761475014765147661477714767147511475414778147551476814835148361483714791147921479314794148021480314804

Code Type AB

mmC

mmL

mmS

mmExt. Ømm

Int. Ømm

Thicknessmm

Round tube

Ø mmN

303000

385000

426000

486000

506500

608000

Round tubesMax static load

THREADED TUBE ENDS FOR ROUND TUBES

Material: polyamide, threaded bushing in nickel plated brass.

STATED LOAD VALUES ARE MEANT FOR STATIC CONDITIONS.SUCH VALUES HAVE TO BE ADEQUATELY REDUCED IN PRESENCE OF HIGH FREQUENCY VIBRATIONS OR DYNAMIC LOADS.FOR FURTHER INFORMATION CONTACT OUR TECHNICAL OFFICE.

Nickel plated brass Polyamide

n°50

n°50

n°50

n°50

n°50

n°50

n°50

n°50

n°50

1

1.5

1.5

1.5

2

1.5

2

2.5

1.5

28

35

45.3

47.9

50

57.3

56.3

55.3

39.4

30

38

48.3

50.9

54

60.3

60.3

60.3

42.4

29

38

45

38

45

38

38

38

38

35

46.5

55

49

55

50

50

50

45.5

28.4

35.5

45.8

48.4

50.5

58

57

56

39.9

30

38

48

50

54

60

60

60

42

1

1

1

1

2

2

2

2

1

Preferred type, readily available (codes marked in red)

334400 C O N V E Y O R L I N E

M8M10M12M10M12M14M16M10M12M14M16M10M12M14M16M20M10M12M14M16M20M10M12M14M16M20M10M12M14M16M20M10M12M14M16M20M10M12M14M16M20M12M14M16M20M12M14M16M20M12M14M16M20M14M16M20

1482414822148231477914780147811478214810148111481214813148051480614807148081480914825148261482714828148291478314756147841475714785147861475814759147871478814790147691477014771147721460014601146021460314604146051460614607146081460914610146111461214795147961479714798148301483114832

Code Type AB

mmC

mmL

mmS

mmExt. Ømm

Int. Ømm

Thicknessmm

Square tube

Threaded tube ends for square tubes

FOR FURTHER INFORMATIONABOUT THIS LINE PLEASE CONSULT THE PRESSO-LINECATALOGUE.

Ø mmN

255000

305500

355500

386000

406000

5010000

6012000

Square tubesMax static load

THREADED TUBE ENDS FOR SQUARE TUBES

Material: polyamide, threaded bushing innickel plated brass.

TYPE 2

TYPE 1

Nickel plated brassPolyamide

n°50

n°50

n°50

n°50

n°50

n°50

n°50

n°50

n°50

n°50

n°50

n°50

n°50

1.5

1.5

2

1.5

2

1.6

3

1.5

2

1.5

2

2.5

2

22

27

26

32

31

34.9

32.1

37

36

47

46

45

46

25

30

30

35

35

38.1

38.1

40

40

50

50

50

60

25

27

27

35

35

35

35

45

45

44

44

44

45

30

33

33

43

43

43

43

55

55

55

55

55

55

22.5

27.5

26.5

32.5

31.5

35.4

32.6

37.5

36.5

47.5

46.5

45.5

56.5

25

30

30

35

35

38

38

40

40

50

50

50

60

2

2

2

1

1

2

2

2

2

2

2

2

2

Preferred type, readily available (codes marked in red)

334411C O N V E Y O R L I N E

Support bases

COMPLETELY CLOSED VERSION

This split version permits a better clamping of bothround and square tubes.Each bipod is supplied complete with ultrasonic welded protection coverings, which prevent dirt,dust or liquid infiltration in the lower part of the base.

48.360.3

1.1/21.1/4

1550215501

Code mm inch.DF - for tube Ø

45x4550x50

–2.38x2.38

1549915500

Code mm inch.DF - for square tube Ø

• Reinforced design• Completely closed structure

easier to clean and to disinfect

SPLIT BIPODS

Material: reinforced polyamide threadedbushings in nickel plated brass fasteners in stainless steel AISI 304.

Nickel plated brass

n°15n°15

Reinforcedpolyamide

Preferred type, readily available (codes marked in red)

AISI 304 Stainless steel

334422 C O N V E Y O R L I N E

Support bases

145

69

Ø80

M16

Ø45

490

85

ØD

F1

Features:Increased stabilitySelf cleaning design

Features:Increased stabilitySelf cleaning design

Zinc platedsteel

Stainless steelAISI 304

38.142.448.350.960.338.142.448.350.960.3

-1.1/41.1/2

–2-

1.1/41.1/2

–2

15055150571505915061150631505615058150601506215064

Code Fastenersmm inch.DF1 - for tube Ø

DF2

145

Ø45

490

85

ØD

F1

69

M16

Ø80

104 69

105

BIPODS 180° WITH JOINT

Material: reinforced polyamide threadedbushings and spacers in nickel plated brass.Fasteners: see table on the right.

Zinc platedsteel

Stainless steelAISI 304

Zinc platedsteel

Stainless steelAISI 304

42.448.350.960.342.448.350.960.348.350.960.348.350.960.3

1.1/4

1.1/2

–2

1.1/4

1.1/2

–2

1.1/2

–2

1.1/2

–2

42.4

42.4

48.3

48.3

1.1/4

1.1/4

1.1/2

1.1/2

1506515067150691507115066150681507015072150731507515077150741507615078

Code Fastenersmm inch.DF1 - for tube Ø

mm inch.DF2 - for tube Ø

Nickel plated brass

Zinc plated steel

n°15

n°15

n°15

n°15

n°15

n°15

Reinforcedpolyamide

Preferred type, readily available (codes marked in red)AISI 304

Stainless steel

BIPODS

Material: reinforced polyamide threadedbushings and spacers in nickel plated brass.Fasteners: see table on the right.

334433C O N V E Y O R L I N E

Support bases

ØD

F2

145

85

ØD

F1

105

Ø45

0

Ø49

0

69

M16

Ø80

104 69

BIPODS 120° WITH JOINT

Material: reinforced polyamide threadedbushings and spacers in nickel plated brass.Fasteners: see table on the right.

Zinc platedsteel

Stainless steelAISI 304

Zinc platedsteel

Stainless steelAISI 304

42.448.350.960.342.448.350.960.348.350.960.348.350.960.3

1.1/4

1.1/2

–2

1.1/4

1.1/2

–2

1.1/2

–2

1.1/2

–2

1508915091150931509515090150921509415096150971509915101150981510015102

Code Fastenersmm inch.DF1 - for tube Ø

mm inch.DF2 - for tube Ø

Nickel plated brass

Zinc plated steel

Ø80

145

85

69

M16

ØD

F1

Ø45

0

Ø49

0

Zinc platedsteel

Stainless steelAISI 304

38.142.448.350.960.338.142.448.350.960.3

-1.1/41.1/2

–2-

1.1/41.1/2

–2

15079150811508315085150871508015082150841508615088

Code Fastenersmm inch.DF1 - for tube Ø

42.4

42.4

48.3

48.3

1.1/4

1.1/4

1.1/2

1.1/2

n°15

n°15

n°15

n°15

n°15

n°15

Features:Increased stabilitySelf cleaning design

Features:Increased stabilitySelf cleaning design

Reinforcedpolyamide

Preferred type, readily available(codes marked in red) AISI 304

Stainless steel

TRIPODS

Material: reinforced polyamide threadedbushings and spacers in nickel plated brass.Fasteners: see table on the right.

Support bases

334444 C O N V E Y O R L I N E

REDUCTION BUSH

50.948.342.450

–1.1/21.1/4

15204152051520615207

Code mm inch.DF - for tube Ø

Nickel plated brass

Zinc plated steel

Zinc platedsteel

Stainless steelAISI 304

42.448.350.960.342.448.350.960.3

1.1/41.1/2

–2

1.1/41.1/2

–2

1570415508158171551215705155091582515513

Code Fastenersmm inch.DF - for tube Ø

BIPODS

Material: reinforced polyamide threadedbushings and spacers in nickel plated brass.Fasteners: see table on the right.

• Cross ribs• Improved load resistance• Increased thickness• Improved flex resistance

n°15

n°15

n°25 PA

Reinforcedpolyamide

Preferred type, readily available (codes marked in red)AISI 304

Stainless steel

334455C O N V E Y O R L I N E

Articulated feet

D60

S/S = STAINLESS STEEL AISI 304FE.ZN = ZINC PLATED STEEL • = WITHOUT NUT OT.NI = NICKEL PLATED BRASSPA.FE = POLYAMIDE WITH STEEL INSERTSTANDARD VERSION = WITHOUT RUBBERANTIVIBRATION VERSION = WITH RUBBER

STATED LOAD VALUES ARE MEANT FOR STATIC CONDITIONS. SUCH VALUES HAVE TO BE ADEQUATELY REDUCED IN PRESENCE OF HIGH FREQUENCY VIBRATIONS OR DYNAMIC LOADS.FOR FURTHER INFORMATION CONTACT OUR TECHNICAL OFFICE.

60

DIA 2.12

Ø 80

0.63 0.67

M

L1 L

L2

DIA 0.35

D

15

33

111122

17514175151751717519175241776617768

17714177151772217523175251776717769

Code Code

Standard Antivibration

PA.FEPA.FEOT.NI

S/S 304S/S 304S/S 304S/S 304

FE.ZNS/SS/SS/SS/SS/SS/S

Type MaterialSpindle Nut

material

42424142424141

D

24242024242424

16161616161616

M

10410498

10715798

156

L

107107101110160101159

L1 L2

62625765

11557

115

4000100001200012000120001500015000

15151515

17540175411756017561

17549175501757017571

FE.ZN

S/S 304

FE.ZN

S/S

28282828

13131313

16161616

9714797

147

100150100150

6911969

119

15000150001500015000

D80

Code Code

Standard AntivibrationNut

material D M L L1 L2

PolyamideNickel plated brass Zinc plated steel

ARTICULATED FOOT

Material: pad in polyamide,spindle and nut as in the table,antivibration version with oilresistant rubber hardness 70 shore.

ARTICULATED FOOT

Material: pad in polyamide,spindle and nut as in the table,antivibration version with oilresistant rubber hardness 70 shore.

Type MaterialSpindle

Preferred type, readily available (codes marked in red)

AISI 304 Stainless steel

334466 C O N V E Y O R L I N E

Articulated feet

ARTICULATED FOOT

Material: pad in polyamide,spindle and nut as in the table,antivibrationversion with oil resistant rubber hardness 70 shore.

ARTICULATED FOOT

Material: pad in polyamide,spindle and nut as in the table,antivibrationversion with oil resistant rubber hardness 70 shore.

FOR FURTHER INFORMATIONABOUT THIS LINE PLEASE CONSULT THE PRESSO-LINECATALOGUE.

M

L1 L

D

L2

Ø12.5

Ø 74

Ø 100

23 28

M

D100

Code Code

Standard AntivibrationNut

material D M L L1 L2

111222

175281752017363177101771217717

174561745817367177111771317718

S/S 304

S/S 304

S/S

S/S

474747454545

242424242424

161616161616

112162207102160190

115165210105163193

6511516057

115145

120001200012000180001800018000

1122

17629176301778217784

17645176461778317785

S/S 304

S/S 304

47474545

24242424

16161616

112162102160

115165105163

6511557

115

12000120001800018000

D110

Code Code

Standard AntivibrationNut

material D M L L1 L2

PolyamideNickel plated brass Zinc plated steel

Type MaterialSpindle

Type MaterialSpindle

Preferred type, readily available (codes marked in red)

AISI 304 Stainless steel