from the series prehistoric reptiles pentaceratops · 2012. 5. 29. · 85. crimp fold 86. shift...
TRANSCRIPT
NPV
Made inRussia
1.2.
5.6.
7. 8.
3.
4.
From the series prehistoric reptilesPentaceratops
Paper : MonocolorSide of square : 30 cmDensity of paper : 80 g/m 2
Model & diagram © Pavel Nikulshin
Email [email protected]
11.
12.
14.
15.
9. 10.
13.
Fold and unfold.Repeat from every sides
Fold and unfold.Reapeat behind Reverse-fold the corners.
Reapeat behind
Sink the coner
View from above
16. 17.
18.
19. 20.21.
23.
24.
25.26. 27.
22.
Fold and unfold.Repeat behind
Sink coners. Similarly to step 15
Sink coner. Similarly to step 15
Sink coner under the layer of paper.
View from above
View from above
Repeat step 19-20 behind
Repeat step 23-24 behind
Repeat behind
Fold own layer to the right in frontand two to the left behind
28. 29.
30.
31. 32.33.
Open
34. 35. 36.
37. 38.
1
2
2a
a
b
b
g
g
Sink coner. Similarly to step 15
Sink coner behind underthe layer of paper. Similarly to step 15
Fold own layer to the left in frontand two to the right behind
Make two crimp foldTo raise the upper layer and to start it to turn out
View from aboveTo continue to turn out,pressing on lines1. To press on point g, create line bg2. Simultaneously having pressed on points a and b to turn out layer of paper
.
create line
39. 40. 41.
42.43. 44.
45.46. 47.
48.
À
C
B
50.
1.
2.
49.
g gb
ba
c
q
Fold back down,combined allocatedpoints ,to bend line bg inside
To raise maximum layer of paper,Then, having pressed on line qc, To turn out it
OpenUnsilk the ramaining layer
To raise layer of paper
Unsilk the ramaining layer
ÀÂ it is approximately 0,25ÀÑ
51.52.
53.
54.D
E
55.
DG it is approximately equal 0,25DH
E
D
H
G
57.
56.
58.
F
I
K L
E
59.
F K
L
E
I
61.
1. To make pleat fold2. To pull up layer of paper, to make the second pleat fold
1
1
2
60.
FI
E
KH
M
G
HM it is approximately MG
1.
2.
Repeat step 36-50behind
Sink the corner
View from above
rotate layer, having placed point Åon place of point D
FI it is approximately IE. Position of lines is determined by sightt1. Fold under itself2. Make deepening
62. 63. 64.
65.
66. 67.
69.70.
71. 72.
68.
View from other side
Mountain fold
Repeat step 52-68behind
Fold the flap down, repeat behind
Mountain fold from both sides
74. 75.
1.
1. 2.
2.
3.
1. Fold down2. Squeeze3. Flatten out
76.
Sink
77.
Unsilk the ramaining layer
78.
79.
The front view
80.81.
View behind
82.
1.
2.
1. Pleat fold2. Mountain fold
83.84.
NN
1. To plan lines2. To pull out layer of paper on upwardsStep 73-78 to do simultaneously
from both sides.To plan lines
View behind
Unsilk the layer
85.
Crimp fold
86.
Shift some paper to the down
87.
91.
Repeat step 89-90 some times
92.
Repeat step 82-91
94.
93.
96.
Fold the upper layer maximum low
97. 98. 99.
88.
89. 90.
95.
Inside reverse fold
View behind
To squeeze on each side future horns, thus practically simultaneously to creat lines, simulating deepenings
Step 95-100 to do simultaneously from both sides
Fold down the second layerso that it concernedThe first
101.
102.
103.
104. 105.
106.
107.
100.
To unsink layer of paper from the middle (step 102)
To unsink a layer of a paper from two deepenings
Crimp fold from both sides
Step 104-108 to do simultaneously from both sides
Make small pleat fold. Mountain fold layer of paper on neck if necessary
To make foot.Mountain fold layer of paper on neck
108.109.
110.
Finished
To give model the finished form