fuji frontier 330-340-350-370-390 - di print-data writing service software ver.5.0 first edition...
TRANSCRIPT
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
1/171
First Edition
INSTRUCTION MANUAL
< Optional Software >
FRONTIER
330/340/350/370/390
DI PRINT/DATA WRITINGSERVICE SOFTWARE Ver.5.0
Basic Operating Instructions
PP3-B1001E
(FRONTIER 330/340 System Disk Ver.2.0 or later)
(FRONTIER 350/370/390 System Disk Ver.6.6 or later)
DI Print/Data Writing Service Software Ver.5.0
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
2/171
INTRODUCTION
This instruction manual explains the procedures for operating and maintaining the DI Print and
Data Writing Service for Fujifilm Digital Minilab FRONTIER Series as well as precautions for its
use.
To ensure proper use and optimum performance of the FUJIFILM DIGITAL IMAGING PRINT
SERVICE system, read this manual thoroughly.
This manual should be kept in a fixed place near the machine so that it can be referred to at any
time a point needs to be clarified.
Specifications are subject to change without notification. Zip, Jaz are trademarks of Iomega Corporation.
SmartMedia is a trademark of Toshiba Corporation. CompactFlash is a trademark of SanDisk Corporation.
Microdrive is a trademark of IBM Corporation. Memory Stick is a trademark of Sony Corporation.
SD Memory Card is a trademark of Toshiba Corporation, Matsushita Electric Industrial Co., Ltd and SanDiskCoporation.
Microsoft, Windows, Windows
NT and Windows
2000 are registered trademarks of Microsoft Corporation.
Pentium
is a registered trademark of Intel Corporation. Adobe
, Photoshop
are registered trademarks of Adobe
Systems Incorporated. ScanMaker is a trademark of Microtek Corporation. All other brand names or trademarks
are the property of their respective owners.
1. Electro-optical-mechanical reproduction of this manual is strictly forbidden.
2. Product innovations may result in specification changes without prior notice.
UNITED STATES OF AMERICA (FCC)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could
void the users authority to operate the equipment.
CANADA (ICES)
This class A digital apparatus meets all requirements of the Canadian Interference-Causing EquipmentRegulations.
Cet appareil numrique de la class A respecte toutes les exigences du Rglement sur le matriel brouilleur du
Canada.
NOTICE
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
3/171
3
1 Features ...................................................................................................................... 6
1.1 New Features ........................................................................................................ 6
1.2 Backup Order Function Installation/Setup ............................................................. 8
2
Operational Safety and Use Conditions
......................................................... 9
2.1 Media Handling...................................................................................................... 9
2.1.1 PC Card .................................................................................................... 9
2.1.2 Smart Media............................................................................................. 10
2.1.3 Compact Flash.......................................................................................... 11
2.1.4 Memory Stick (SD Memory Card)............................................................. 13
2.1.5 MO............................................................................................................ 14
2.1.6 Zip............................................................................................................. 152.1.7 CD-R......................................................................................................... 16
2.1.8 FD............................................................................................................. 17
3
Starting Up and Shutting Down
......................................................................... 18
3.1 Starting Up Imaging Controller .............................................................................. 18
3.2 Shutting Down Imaging Controller......................................................................... 23
4
DSC Printing Service
.............................................................................................. 26
4.1 Digital Camera Print Service Screen ..................................................................... 264.2 DSC Printing Procedures....................................................................................... 28
4.3 View and Order Screen ......................................................................................... 34
4.4 Printing in FRONTIER ........................................................................................... 36
4.5 Procedures for Changing Settings......................................................................... 40
4.5.1 Changing of Media Drive Setting .............................................................. 40
4.5.2 Changing of Output Device Setting.......................................................... 42
4.5.3 Master Balance Adjustment ...................................................................... 44
4.5.4 DSC Setting .............................................................................................. 45
5
Media Printing Service
.......................................................................................... 47
5.1 Media Printing Service (without order file) ............................................................. 47
5.1.1 Media Print Service Screen ...................................................................... 47
5.1.2 Media Printing (without order file) Procedures.......................................... 49
5.2 Media Pinting Service (with order file) ................................................................... 54
5.2.1 COS Print Service Screen ........................................................................ 54
5.2.2 COS Printing Procedures ......................................................................... 56
5.2.3 DPOF Print Service Screen...................................................................... 60
5.2.4 DPOF Printing Procedures ....................................................................... 61
CONTENTS
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
4/171
4
5.3 Procedures for Changing Settings......................................................................... 65
5.3.1 Changing of Media Drive Setting .............................................................. 65
5.3.2 Changing of Output Device Setting.......................................................... 655.3.3 Master Balance Adjustment ...................................................................... 65
6
CD Printing Service
................................................................................................ 67
6.1 CD Print Service Screen........................................................................................ 67
6.2 CD Printing Procedures ......................................................................................... 69
6.3 Procedures for Changing Settings......................................................................... 75
6.3.1 Changing of Media Drive Setting .............................................................. 75
6.3.2 Changing of Output Device Setting .......................................................... 75
6.3.3 Master Balance Adjustment ...................................................................... 75
7
Backup Order Function
......................................................................................... 77
8
Print-to-Print
.............................................................................................................. 83
8.1 Print-to-Print Service Screen ................................................................................. 83
8.2 Print-to-Print Procedures ....................................................................................... 85
8.3 Procedures for Changing Settings......................................................................... 90
8.3.1 Changing of Media Drive Setting .............................................................. 90
8.3.2 Changing of Print-to-Print Setting ............................................................. 92
9
CD/Media Writing Service
..................................................................................... 94
9.1 Writing Service Main Screen ................................................................................. 94
9.2 CD/Media Writing Procedures ............................................................................... 96
9.2.1 Film Digitizing in FRONTIER .................................................................... 96
9.2.2 Order Condition Settings Screen.............................................................. 103
9.2.3 Writing Procedures ................................................................................... 104
9.2.4 Image List Screen for Writing Service ...................................................... 108
9.3 Writing from DSC/Media........................................................................................ 109
9.4 Index Print Creation ............................................................................................... 116
9.5 Special Operations ................................................................................................ 119
9.5.1 CD-R Copy Procedures............................................................................ 119
9.5.2 Index Print Creation from CD-R................................................................ 123
9.6 Procedures for Changing Settings......................................................................... 126
9.6.1 Data Writing Administration ...................................................................... 126
9.6.2 Media Drive Setting .................................................................................. 128
9.6.3 Optional Software Setting ......................................................................... 129
9.6.4 Service Type Setting................................................................................. 130
9.6.5 Index Print Size Selection......................................................................... 132
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
5/171
5
10
Multiple Service
........................................................................................................ 133
10.1 Printing Screen (in use of Multiple Service)........................................................... 133
10.2 Multiple Service Setting ......................................................................................... 134
11
Digital Photo Center
............................................................................................... 138
11.1 Operating Digital Photo Center (DPC) Operation .................................................. 138
11.1.1 Using of LAN Connection ......................................................................... 139
11.1.2 Using of Branch Store Connection ........................................................... 141
11.2 Operating Digital Reorder Service ......................................................................... 143
11.3 Digital Photo Center Settings................................................................................. 147
11.3.1 Drive/Path Setting for DPC....................................................................... 147
11.3.2 DPC Administrative Settings..................................................................... 14911.4 Digital Reorder Service Settings............................................................................ 151
11.4.1 Drive/Path Setting for Digital Reorder....................................................... 151
11.4.2 Digital Reorder Service Administrative Settings ....................................... 153
11.4.3 Registering of Digital Reorder Service into Multiple Service .................... 156
12
Operation Screens and Function Key List
..................................................... 157
12.1 Printing Service...................................................................................................... 157
12.2 Data Writing Service .............................................................................................. 161
12.3 Print-to-Print Service.............................................................................................. 16312.4 System................................................................................................................... 164
13
Index
............................................................................................................................. 165
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
6/171
6
1 Features
Image Processing Improvement
The image processing is much improved in the following points.
(1) Color/Density correction
(2) Tone Reproduction
(3) Hyper-tone and Highlight/shadow gradation
Easy-to-Installation
The two types of installation mode [Standard] and [Custom] can be selected.
In the [Standard] mode, the current status of the Imaging Controller is checked by the program, so
you can install the program without a few keyboard entries and by clicking the buttons several times.
In the [Custom] mode, you can install it while selecting the installing type to meet your needs.
Operation/Function Improvement
(1)Output type selection in the Print-to-Print processing. Scanned image can be processed in the
Variety Print [C10] or Hyper-Retouch [C11] as well as the data writing and printing.
(2)Screen Display
Displaying of version number in the main screen
Horizontal scroll bar appears printing service screen when the long file name is used in registration.
Hard disk space can be monitored visually in the Server Status screen
(3)Operation
Printing [C4]
DSC auto correction ON/OFF settings
Auto correction ON/OFF in each frame can be easily switched by [F10] key.
Unnecessary printing order files deletion
Writing [C5]
Writing-completed order can be stored during from 0 to 999 minutes that is selected in the Administration
screen beforehand. It enables you to rewrite the order when it fails.
Status of writing-completed order can be returned to the Wait status.
Unnecessary printing order files deletion
[Execution] button is added to the Printing screen, to run the optional application.
Writing speed [Fast] (max. speed) or [Normal] can be selected.
BMP/JPG format output with film-scanning in FRONTIER is newly provided.
DSC date front printing is provided for all Exif image printing including CD-R writing.
1.1 New Features
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
7/171
7
Others
Number of pixels available in FujiColor CD are increased.
- From 150 M pixels to 200 M pixels in negative- No resize in DSC/Media
Version Checker that lists up the application installed in the Imaging Controller, is provided.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
8/171
8
Backup Order Function is the function where you can store temporarily the orders from the external
application (Kiosk, etc.), and later you can correct these orders by using the View and Order screen.
Added Functions
By installing the Backup Order Function, the following function can be used.
Printing [C4]
Re-registration function of printing order
Test Printing in the View and Order screen
Writing [C5]
New services (devices) are added. The following devices are added to the Digital Service Selection list.
Picture Rotation
The radio buttons selecting the upper side are added to the frames in the Image List screen. To
display these radio buttons, add the check mark to [Yes] box in [Picture Rotate] in the Writing
Service-Administration screen.
1.2 Backup Order Function Installation/Setup
Service Name Functions
FDi CD1
Three types of FDi CD are added. Additional data such viewer can be written.FDi CD2
FDi CD3
FDi CD with FCD FUJICOLOR CD with FDi CD(higher- or lower pixels)
Pro CD In this service the order uses the print size selected in the Print Size setup in filmscanning, while the original image size is adopted in the DCS Printing.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
9/171
9
2 Operational Safety and Use Conditions
2.1.1 PC Card
Insert the PC card into the card reader
(optional) slowly.
EM786
FD063
Remove the PC card from the card reader while
pressing the eject button.
When removing the PC card from the PC card
reader, make sure that the access LED is
completely gone out. If it is removed while the
LED is lighted, the data in the PC card may be
corrupted.
If the system is turned off or shut down while
reading the data, corruption of data may occur.
Make sure not to turn off the Imaging Controller
or media drives. It is strongly recommended to
use the UPS (Uninterruptible Power System).
2.1 Media Handling
1-slot type
2-slot type
1-slot type
PC card EM787
IMPORTANT
IMPORTANT
2-slot type
FD064
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
10/171
10
Precautions for Use
Make sure dust or debris does not collect on the terminal.
Do not damage or drop the media. Do not place the media near a heat source.
Do not leave the media in the high-temperature, high-humidity place for a long time.
2.1.2 Smart Media
Insert the Smart Media into the card adapter
(optional) slowly.
EM785
Insert the card adapter into the card reader
(optional) slowly.
FD063
Remove the card adapter from the card reader
while pressing the eject button.
When removing the PC card adapter from the
PC card reader, make sure that the access LED
is completely gone out. If it is removed while the
LED is lighted, the data in the PC card may be
corrupted.
Never remove only the Smart Media from the
card adapter when the latter is set in the card
reader. If it is done so, the data in the Smart
Media may be corrupted.
2-slot type
2-slot type
FD064
IMPORTANT
IMPORTANT
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
11/171
11
If the system is turned off or shut down while
reading the data, corruption of data may occur.Make sure not to turn off the Imaging Controller
or media drives. It is strongly recommended to
use the UPS (Uninterruptible Power System).
Precautions for Use
Make sure dust or debris does not collect on the terminal.
Do not damage or drop the media.
Do not place the media near a heat source.
Do not leave the media in the high-temperature, high-humidity place for a long time.
2.1.3 Compact Flash
Insert the Compact Flash into the card adapter
(optional) slowly.
EM784
Insert the card adapter into the card reader
(optional) slowly.
FD063
IMPORTANT
2-slot type
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
12/171
12
Remove the card adapter from the card reader
while pressing the eject button.
When removing the PC card adapter from the
PC card reader, make sure that the access LED
is completely gone out. If it is removed while the
LED is lighted, the data in the PC card may be
corrupted.
Never remove only the Compact Flash from thecard adapter when the latter is set in the card
reader. If it is done so, the data in the Compact
Flash may be corrupted.
If the system is turned off or shut down while
reading the data, corruption of data may occur.
Make sure not to turn off the Imaging Controller
or media drives. It is strongly recommended to
use the UPS (Uninterruptible Power System).
Precautions for Use
Make sure dust or debris does not collect on the terminal.
Do not damage or drop the media.
Do not place the media near a heat source.
Do not leave the media in the high-temperature, high-humidity place for a long time.
2-slot type
FD064
IMPORTANT
IMPORTANT
IMPORTANT
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
13/171
13
2.1.4 Memory Stick (SD Memory Card)
Insert the Memory Stick (SD Memory Card) intothe card adapter (optional) slowly, so that its
printed surface comes upside.
If it is inserted wrongly, the data in it may be
corrupted.
Insert the card adapter into the card reader
(optional) slowly.
FD063
Remove the card adapter from the card reader
while pressing the eject button.
When removing the PC card adapter from the
PC card reader, make sure that the access LED
is completely gone out. If it is removed while the
LED is lighted, the data in the PC card may be
corrupted.
Never remove only the Memory Stick (SD
Memory Card) from the card adapter when the
latter is set in the card reader. If it is done so,
the data in the Memory Stick (SD Memory
Card) may be corrupted.
If the system is turned off or shut down while
reading the data, corruption of data may occur.
Make sure not to turn off the Imaging Controlleror media drives. It is strongly recommended to
use the UPS (Uninterruptible Power System).
PJ007
IMPORTANT
2-slot type
2-slot type
FD064
IMPORTANT
IMPORTANT
IMPORTANT
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
14/171
14
Remove the Memory Stick (SD Memory Card)
from the card adapter while pressing the eject
button.
PJ008
Precautions for Use
Make sure dust or debris does not collect on the terminal.
Do not damage or drop the media.
Do not place the media near a heat source.
Do not leave the media in the high-temperature, high-humidity place for a long time.
2.1.5 MO
Insert the MO into the MO drive slowly, so that
its printed surface comes upside.
If it is inserted wrongly, the data in it may be
corrupted.
Remove the MO from the MO drive by pressing
the eject button.
NOTE: Please wait until the access LED is
extinguished. Normally the MO cannot
be removed from the drive until read-
ing of data is completed.
MO drive
MO FD012
IMPORTANT
FD013
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
15/171
15
If the system is turned off or shut down while
reading the data, corruption of data may occur.Make sure not to turn off the Imaging Controller
or media drives. It is strongly recommended to
use the UPS (Uninterruptible Power System).
Precautions for Use
Never open the shutter to touch the disk. If the shutter is open, close it before inserting it into the drive.
Do not damage or drop the media.
Do not place the media near a heat source.
Do not leave the media in the high-temperature, high-humidity place for a long time.
2.1.6 Zip
Insert the Zip into the Zip drive slowly, so that its
printed surface comes upside.
If it is inserted wrongly, the data in it may be
corrupted.
Remove the Zip from the Zip drive by pressing
the eject button.
NOTE: Normally the Zip cannot be removed
from the drive until reading of data is
completed.
If the system is turned off or shut down while
reading the data, corruption of data may occur.
Make sure not to turn off the Imaging Controller
or media drives. It is strongly recommended to
use the UPS (Uninterruptible Power System).
IMPORTANT
Zip drive
ZipFD010
IMPORTANT
FD011 IMPORTANT
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
16/171
16
Precautions for Use
Never open the shutter to touch the disk. If the shutter is open, close it before inserting it into the drive.
Do not damage or drop the media. Do not place the media near a heat source.
Do not leave the media in the high-temperature, high-humidity place for a long time.
2.1.7 CD-R
Press the eject button, set the CD onto the tray,
and then press the eject button again, so the
CD is properly set up.
If it is set wrongly, the data in it may be
corrupted.
Press the eject button, remove the CD from the
tray, and then press the eject button again.
NOTE: Normally the CD cannot be removed
from the drive until reading of data is
completed.
If the system is turned off or shut down while
reading the data, corruption of data may occur.
Make sure not to turn off the Imaging Controller
or media drives. It is strongly recommended to
use the UPS (Uninterruptible Power System).
Precautions for Use
Do not place the media near a heat source.
Do not leave the media in the high-temperature, high-humidity place for a long time.
Make sure dust or debris does not collect on the reading surface of the CD.
To remove any dust or debris adhering to the reading surface, use a soft cloth to wipe it off, starting from
the center to and moving the outside.
To wipe off dust or debris, never use any solvent such as benzine, thinner, anti-static cleaner or LP cleaner.
FD043
IMPORTANT
FD044
IMPORTANT
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
17/171
17
2.1.8 FD
Insert the FD into the FD drive slowly.
If it is inserted wrongly, the media or data may
be destroyed.
Remove the FD from the FD drive by pressingthe eject button.
When removing the FD from the FD drive, make
sure that the access LED is completely gone
out. If it is removed while the LED is lighted, the
data in the FD may be corrupted.
If the system is turned off or shut down whilereading the data, corruption of data may occur.
Make sure not to turn off the Imaging Controller
or media drives. It is strongly recommended to
use the UPS(Uninterruptible Power System).
Precautions for Use
Never open the shutter to touch the disk. If the shutter is open, close it before inserting it into the drive.
Do not damage or drop the media.
Do not place the media near a heat source.
Do not leave the media in the high-temperature, high-humidity place for a long time.
FD045
IMPORTANT
FD046
IMPORTANT
IMPORTANT
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
18/171
18
3 Starting Up and Shutting Down
Start the Imaging Controller as follows:
Turn ON the media device (PC card reader, Zip,
MO, CD-R drives, etc.).
Turn ON the flatbed scanner.
Turn ON the monitor.
Turn ON the Imaging Controller (PC).
3.1 Starting Up Imaging Controller
FD034
FD257
FD036
FD032
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
19/171
19
The Print Service screen appears.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
20/171
20
Printing Screen
After starting the Imaging Controller, the following Print Screen appears. Here, you can registerorder(s) for printing with the image data file(s).
No. Item Description
1 Order Number Shows the order number. This is incremented each time an order is registered.
2 [Printing] icon Displays this screen.
3 Print Qty Shows the print number when Auto. is selected. The print number cannot bespecified for each image.
4 [Writing] icon Displays the CD writing [CS] screen. (See 9.1 Writing Service Main Screen onpage 94.
5 Print Size Shows the print size when Auto. is selected. The print size cannot be specifiedfor each image.
6 [System] icon Displays the System screen, where you can monitor the status of spool-freespace, or the selected printing devices.
7 Automatic Press this icon to select one of the automatic transaction types previouslyselected in printing administration. This function can be used only when printingall images in the media at a time.
8 Admin. Click this icon to do the printing administration settings for the printing screen.
9 [EXIT] icon Exits the DI Print/Data Writing Service [C4/C5], or shuts down the ImagingController while pressing the [Shift] Key.
10 Help Displays the Help screen.
1 2 3 4 5 6 7 8 9
1514 16
13
11
19
12
10
17
18
20
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
21/171
21
11 OUTPUT Available output devices set in the printing administration screen. At the time ofstarting an order registration, click one of these output devices. Selected outputdevices are indicated with the white back-ground. Click [ | ] area in the slider bar to display another 4 buttons in the reverse field.
Up to 8 output devices can be registered in the [OUTPUT] field.
12 INPUT Available input media or devices that have been set in the printing administrationscreen. At the time of starting an order registration, click one of these inputmedia or devices. Click [ | ] area in the slider bar to display another 9 buttons in the reverse field.
Up to 18 input devices can be registered. Click (one of the media buttons) to automatically read the image files in the
media, and then to display the Order Registration screen of each serviceappropriate to the image file format.
Click [PtoP] button to display the Print to Print screen, in which you can printimage data that has been created by scanning a photo with the flatbedscanner.
Click [DPC] or [DPC-M] button to register the order(s) from the Digital PhotoCenter print service.
13 Express Click this button to change the print status from [Wait] to [Express]. An order with[Express] status has the highest priority for printing, so it is processed first.
14 Reprint Reprint the order that has already been completed or the order with Hold status.Select the order to be reprinted, and then click this button.
15 Hold Select a wait order and then click this button to hold back printing. To print theorder, select the Hold order, and then click the Reprint button.
16 Recover When there is an error image in an order, click this button to recover it as Waitorder. The order is recovered while the error image is skipped.
17 Info. Shows the detailed information for each order.
18 Trash Deletes an order already printed or a specific order. Select the order to bedeleted, and then click this button.
No. Item Description
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
22/171
22
19 Order RegistrationStatus Display
[Order Number]:Registered Order number.
[Input]:[Print Service], [Index Print] , [Large Index Print] , [DPC Print] or [Print-to-Print] appears according to input type.
[Output]:Type of output device.
[Image Q ty]:Number of images in an order.
[Print Q ty]:Number of prints in an order.
[Status]:[Wait], [Done], [Express], [Hold], [Printing], [Converting] or [Error] appears
according to the status. [Service Type]:
[DSC Print], [Media Print], [CD-R Reprint], [DPOF] or [Print] appearsaccording to the image file format.
[Paper Width]:Paper width for printing.
[Index]:[Yes] shows Index print registered through the Print Service.
[Create Date]:The order created data.
20 Version Display Shows the version number of installed apllication.
No. Item Description
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
23/171
23
Shut down the Imaging controller.
Click the [Exit] icon on the DI changer.
The Confirmation dialog appears. Click the [OK]
button.
Do not shut down the Imaging Controller while
orders are being converted.
Operation returns to the Desktop of Windows
NT/Windows 2000.
To shut down the computer, click the [Exit] button while
pressing the [Shift] button.
3.2 Shutting Down Imaging Controller
Click.
IMPORTANT
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
24/171
24
Select [Shut Down] from the [Start] menu on
the bottom of the desktop.
In case of Windows NT, Select the [Shut
down the computer?] and click the [Yes]
button.
In case of Windows 2000, Select [Shut down]and click the [OK] button.
[Windows NT]
[Windows 2000]
[Windows NT]
[Windows 2000]
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
25/171
25
Turn OFF the media units (PC card reader, CD-
R, Zip, MO drives, flatbed scanner, etc.)
Turn OFF the flatbed scanner.
Turn OFF the monitor.
Turn OFF the Imaging Controller.
FD034
FD257
FD036
FD032
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
26/171
26
4 DSC Printing Service
In the Digital Camera Print Service screen, register the image files containing no order file, and then
do printing from digital cameras.
This screen processes the digital still camera images with the image format of (Exif-JPG, Exif-TIFF
and CAM).
4.1 Digital Camera Print Service Screen
No. Item Description
1 Order Number Shows the order number. This is incremented each time an order is registered.
2 Output Displays the currently selected output device.
3 Frame No. In the case of FUJICOLOR CD or DCF format, either all frames or each frame
can be selected.
4 Print Qty Enter the number of prints in this box. If you want to create the index print only,enter 0 in this box, and then specify number of index or large index prints in [12Index/Large Index Print Setting].
5 Print Size Select print size. This information is registered to the system at the time of Pre-operational check in FRONTIER.
6 Resize Select resize type in printing.Fill-in: Fill the entire print size with the selected image; the image may be cut off
either horizontally or vertically.Fit-in: Fit the image within the print size as well as possible without cutting off
any of the image.
No Resize: Print the image data without any resizing.
7 Help Displays the Help screen.
1 2 3 4 5 6 7
15 141622
20
18
19
17
218
10
9
11
13
12
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
27/171
27
8 Print Qty Display The number of prints in each service that was selected in the [OrderSpecification Column].
9 Print Qty buttons Up to 9 of the number of prints can be specified by clicking one of these numeralbuttons. The specified number appears in the [Order Specification Column].
10 Order Regist. Register the image files that are listed in the [Order Specification Column].
11 View and Order The 6-frame View and Order screen lets you review all the thumbnail images inthe [Order Specification Column] before starting printing. The color can beautomatically adjusted (digital still camera format) or manually.(See 4.3 View and Order Screen on page 34.)
12 Index/Large IndexPrint Setting/
DSC Date
Select [Yes] or [No] to print index/large index prints and specify the number ofprints. To add the data on the front print, check the [DSC data] box.
In case of creating index print only:If you create the index print only, spcify number of index or large index prints,while entering 0 in [Print Qty] box.
13 Order Reset Resets the images files listed and selected in the [Order Specification Column].
14 Cancel Cancels the registration of the image files listed in the [Order SpecificationColumn], and control returns to the printing screen.
15 Set Click this button to move the selected image files to the [Order SpecificationColumn].
16 Select All Click this button to select all images in the [File Name] column.
17 Order SpecificationColumn
[Image file name]:Names of registered image files
[Directory]:Name of the directory containing the image files
[Image No.]:Serial number of registered images
[Print Qty]:Number of prints
[Service type]:[DSC Print] appears according to the image file format.
[Size]:Print size of registered image files
[Resize]:[Fill-in], [Fit-in] or [No resize] appears according to the selected resize type.
18 Search To know where the image files are located, use this button to display all imagesin the media.
19 File Name Click the files to be printed.
20 Directory To display the image files, click the folder in storage media.
21 Directory No. In the case of FUJICOLOR CD or DCF format, either all directories or anindividual directory can be selected.
22 HorizontalScroll Bar
If the image file name is long, the scroll bar appears.
No. Item Description
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
28/171
28
Register the order for images in the DSC media, and then print them in FRONTIER.
Set the media in the drive.
FD121
In the [OUTPUT] field, select the FRONTIER
device.
In the [INPUT] field, click the icon of the media
you inserted.
4.2 DSC Printing Procedures
Select the FRONTIER device.
Click the icon of the media you inserted.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
29/171
29
In the DSC Print Service screen, select the
folder in which the images are stored.
Select the images to be printed. To register all
images, click the [Select All] button.
Select the print size.
You must select the print size for each order.
Select the folder.
Select the images.
Select the print size.
IMPORTANT
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
30/171
30
Specify if or not the index/large index is
outputted, and its output size, and then if the
DSC date is printed on the print or not.
If you want to create the index print only, specify num-
ber of index or large index prints, while entering 0 in
[Print Qty] box.
Select the resizing specification. (See 2.2(2)
Resize in Instruction Manual (Service
Specification).)
Specify if or not the index/large index is
outputted, size, and if DSC Date is printed or
not.
Select the resizing option.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
31/171
31
Click the [Set] button. The image files are listed
up in the [Order Specification Column].
Click the [Order Regist.] button.
Click the [View and Order] button. (See 4.3
View and Order Screen on page 34.)
Click the [Set] button.
To monitor the images
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
32/171
32
The Confirmation dialog appears.
Remove the media from the drive.
FD124
Click the [OK] button.
Registering of order is completed.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
33/171
33
Print the registered images in FRONTIER. (See 4.4 Printing in
FRONTIER on page 36.)
(FRONTIER 350/370/390) (FRONTIER 330/340)
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
34/171
34
The View and Order screen lets you review all the images in a customers order before printing
them. To correct an image, use the arrow keys to select it and then click the buttons next to the
CMYD boxes. Press [ESC] key to exit this screen and return to Order Registration screen.
4.3 View and Order Screen
No. Item Description
1 Print Qty Setting Changes the number of prints.
2 File Name Shows the image file name (up to 8 characters).
3 CMYD Setting C: Cyan M: Magenta Y: Yellow D:Density (Range: 15 to +15)
4 All/Order Registers all images in an order including the 6 images that are currentlydisplayed with one click.
5 Page/Order Registers only the 6 images that are currently displayed. Upon completion ofthe registration, the next 6 images are displayed if there are more than 6images in an order.
6 Sharpness In the case of the Media Print Images, the sharpness correction can be done. Itis recommended to use this correction and reprint such as a blurred large-sizeimage. The result of the function is not shown on the displayed image.
7 Scene Correction In the case of the DSC Images, the scene correction can be done with oneclick. [Standard], [Cloudy], [Back-Lit] or [Close shot with Flash] can be selectedas correction type.
8 Auto Correction The auto correction is automatically done in the DSC images. [No] to correctioncan also be selected such as in the case of an image with template. It is
strongly recommended to select [Yes] in most cases.It can be also turned on bypressing [F10] key after selecting frames.
1
3
4
2
5 6 7 8
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
35/171
35
About the [HOLD] in the View and Order Screen
In the View and Order screen, the color and density (CMYD) correction data applied to one framecan be held fixed and also applied to the subsequent frames in the order.
Select a frame and perform CMYD corrections,
and then press [F9] key.
The same correction data are applied to the
subsequent frames and these setting data are
changed from black to green.
To cancel the settings, select the first frame with green
setting data, and then press [F9] key.
Same correction values are applied.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
36/171
36
FRONTIER 350/370/390
In the Main Menu screen, select [2 Print], click
the [OK] button.
Select [Printer Op.] - [Switch Magazine (1)] -
[Upper] or [Lower], or [Auto] to select the
appropriate magazine automatically.
Select [Print Mode Select (6)] - [Digital Image
Import (sRGB)]
Reading service name list message appears.
4.4 Printing in FRONTIER
Select.
Select.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
37/171
37
In the Input Select screen, select [Print
Service] or other service and click [OK].
The order information appears in the [Next
Print] column and printing starts.
The information of completed order appears in
the [Done] column. Click [End].
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
38/171
38
Control returns to the Printing screen.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
39/171
39
FRONTIER 330/340
In the Main Menu screen, click the [Print/
Export] button.
In the Order Information screen, click the
[Printing from Imaging Controller] button.
In the Color Space Selection dialog, select the
desired color space, and then click the [OK]
button.
Printing is started.
Click.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
40/171
40
4.5.1 Changing of Media Drive Setting
Change the media icon that appears in the [INPUT] field in the Printing screen.
In the Printing screen, click the [Admin.]
button.
In the Password dialog, enter DI, and then
click the [OK] button.
In the Print Service - Administration screen,
click the [Media Drive] button.
4.5 Procedures for Changing Settings
Click.
Click.
Enter DI.
Click the [Media Drive] button.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
41/171
41
In the Media Drive Setting screen, select the
icon, name, and drive for the desired media
drive.
Do not allocate the A, C, and D drives, because
the system already uses these drives for FD
and HD.
Click the [OK] button.
Select icon, name
and device for media.
IMPORTANT
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
42/171
42
4.5.2 Changing of Output Device Setting
Change the device name for FRONTIER.
In the Print Service - Administration screen,
click the [Output Device] button.
In the Output Device Setting screen, select the
icon, icon name and select the output device in
the list.
Click the [Output Device] button.
Select icon, icon name and output device.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
43/171
43
Click the [Print Size] button in the selected item,
and in the Print Size Setting dialog, select thesize for each service, then click the [OK] button.
In the Output Device Setting screen, click the
[OK] button.
Select print size for each service.
Click.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
44/171
44
4.5.3 Master Balance Adjustment
Change the master balance for DSC Print.
In the Print Service - Administration screen,
click the [Master Balance] button.
In the Master Balance screen, change C, M, Y
and D values in the [DSC Print] field.
In the Master Balance screen, click the [OK]
button.
Click the [Master Balance] button.
Change C, M, Y and D for DSC Print.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
45/171
45
4.5.4 DSC Setting
DSC image auto correction seting
Color Intensity/Gradation Adjustment/Hyper Tone/Sharpness can be set for the DSC image auto
correction function.
(1) Color Intensity
This function allows you to change chroma
(vividness) without affecting skin colors.
When the setting is shifted toward the plus
direction, garment patterns or landscapes
become more vivid and distinct.
(2) Gradation Adjustment
Gradation (contrast) can be changed
without changing chroma. Two steps of
Hard settings and three steps of Soft
setting are available.
For the picture such as a portrait shot by a
high-end digital still camera, Soft1 or
Soft2 are appropriate for minimizing
washing-out of highlights and flat shadows.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
46/171
46
(3) Hyper Tone
With this function highlight and shadow
areas are dodged automatically.Frontier uses this technology for printing
with film.
*Mode1 :
Print quality is improved while keeping print capability as far as possible by switching Hyper Tone
and Hyper Tone Light automatically. (Image quality has priority.) Normally this mode is used.
*Mode2 :
Hyper Tone Light is applied to all images. (Processing speed has priority.) If the processing
speed of the existing Imaging Controller is relatively slow, print capability is improved compared
to other modes. If Hyper Tone is strongly applied to a scene, the sharpness level of the scene
may be slightly lowered.
*Mode3 :
Hyper Tone is applied to all images. If the processing speed of the existing Imaging Controller is
relatively slow, print capability may be reduced.
(4) Sharpness
USM or Hyper Sharpness can be selected.
*USM :
Normally this setting is used.
*Hyper Sharpness :
This function is used if an underexposed image has conspicuous noises. Noises in the smooth
part such as skin are minimized, but the sharpess level may be slightly lowered.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
47/171
47
5 Media Printing Service
5.1.1 Media Print Service Screen
In the Digital Camera Print Service screen, register the image files containing no order file, and then
do printing from digital cameras.
This screen processes the digital image files (except digital still camera images), that were created
or manipulated by image-processing software. [BMP(Windows24 bit only), PICT, GIF, JPG, TIFF
and FPX]
5.1 Media Printing Service (without order file)
No. Item Description
1 Order Number Shows the order number. This is incremented each time an order is registered.
2 Output Displays the currently selected output device.
3 Frame No. In the case of FUJICOLOR CD or DCF format, either all frames or each framecan be selected.
4 Print Qty Enter the number of prints in this box.
5 Print Size Select print size. This information is registered to the system at the time of Pre-operational check in FRONTIER.
6 Resize Select resize type in printing.Fill-in: Fill the entire print size with the selected image; the image may be cut off
either horizontally or vertically.Fit-in: Fit the image within the print size as well as possible without cutting off
any of the image.No Resize: Print the image data without any resizing.
7 Help Displays the Help screen.
8 Print Qty Display The number of prints in each service that was selected in the [OrderSpecification Column].
21
20
19
18
17
8
11
10
16
12
1314
9
16
3 5
22 15
4 6 721
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
48/171
48
9 Print Qty buttons Up to 9 of the number of prints can be specified by clicking one of these numeralbuttons. The specified number appears in the [Order Specification Column].
10 Order Regist. Register the image files that are listed in the [Order Specification Column].
11 View and Order The 6-frame View and Order screen lets you review all the thumbnail images inthe [Order Specification Column] before starting printing. The color can beautomatically adjusted (digital still camera format) or manually.(See 4.3 View and Order Screen on page 34.)
12 Index/Large IndexPrint Setting
Select [Yes] or [No] to print index/large index prints and specify the number ofprints.
13 Order Reset Resets the images files listed and selected in the [Order Specification Column].
14 Cancel Cancels the registration of the image files listed in the [Order Specification
Column], and control returns to the printing screen.
15 Set Click this button to move the selected image files to the [Order SpecificationColumn].
16 Select All Click this button to select all images in the File Name column.
17 Order SpecificationColumn
[Image file name]:Names of registered image files
[Directory]:Name of the directory containing the image files
[Image No.]:Serial number of registered images
[Print Qty]:
Number of prints[Service type]:
[Media Print] appears according to the image file format.[Size]:
Print size of registered image files[Resize]:
[Fill-in], [Fit-in] or [No resize] appears according to the selected resize type.
18 Search To know where the image files are located, use this button to display all imagesin the media.
19 File Name Click the files to be printed.
20 Directory To display the image files, click the folder in storage media.
21 Directory No. In the case of FUJICOLOR CD or DCF format, either all directories or anindividual directory can be selected.
22 HorizontalScroll Bar
If the image file name is long,the scroll bar appears.
No. Item Description
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
49/171
49
5.1.2 Media Printing (without order file) Procedures
Register the order for images that were created or processed by an imaging software, and then printthem in FRONTIER.
Set the media in the drive.
In the [OUTPUT] field, select the FRONTIER
device.
In the [INPUT] field, click the icon of the media
you inserted.
C45015
Select the FRONTIER
device.
Click the icon of the media you inserted.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
50/171
50
Select the images to be printed. To register all
images, click the [Select All] button.
Select the print size.
You must select the print size for each order.
Specify if or not the index/large index is
outputted, and its output size.
DSC date printing is not available.
If you create the index print only, specify number of
index or large index prints, while entering 0 in [Print
Qty] box.
Select the images.
Select the print size.
IMPORTANT
Specify if or not the index/large index is
outputted, size.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
51/171
51
Select the resizing specification. (See 2.2(2)
Resize in Instruction Manual (Service
Specification).)
Click the [Set] button. The image files are listed
up in the [Order Specification Column].
Click the [Order Regist.] button.
Select the resizing option.
Click the [Set] button.
To monitor the images
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
52/171
52
Click the [View and Order] button. (See 4.3
View and Order Screen on page 34.)
The Confirmation dialog appears.
Remove the media from the drive.
C45016
Click the [OK] button.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
53/171
53
Registering of order is completed.
Print the registered images in FRONTIER. (See 4.4 Printing inFRONTIER on page 36.)
(FRONTIER 350/370/390) (FRONTIER 330/340)
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
54/171
54
Print the images with the order file. These images are automatically registered by the order file
created in the specified software (COS) or digital camera function (DPOF).
5.2.1 COS Print Service Screen
In the COS order created by the specified order software, the registration is automatically performed
according to the (COS file). (Files are automatically recognized.)
5.2 Media Pinting Service (with order file)
No. Item Description
1 Order SpecificationColumn
[Image file name]:Names of registered image files.
[Directory]:Name of the directory containing the image files.
[Image No.]:Serial number of registered images.
[Print Qty]:Number of prints
[Service type]:[Media Print appears according to the image file format.
[Size]:Print size of registered image files.
To change the number of prints, double-click the file name itself in the list, andthen change it in the following dialog.
1
2
5
4
3
67
89
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
55/171
55
2 Print Qty Display The number of prints in each service that was selected in the [OrderSpecification Column].
3 Order File Info. Indicate the Customer information according to order file information.
4 Free Order Displays the normal Order Selection screen, where you can perform the orderregistration without order file.
5 Order Regist. Register the image files that are listed in the [Order Selection Column].
6 View and Order The 6-frame View and Order screen lets you review all the thumbnail images in
the [Order Specification Column] before starting printing. The color can beadjusted automatically(digital still camera format) or manually.(See 4.3 View and Order Screen on page 34.)
7 Index/Large IndexPrint Setting
Not used in Media Print Service(with Order file)
8 Order Reset Resets the images files listed and selected in the [Order Selection Column].
9 Cancel Cancels the registration of the images files listed in the [Order SelectionColumn], and control returns to the Printing screen.
No. Item Description
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
56/171
56
5.2.2 COS Printing Procedures
Register the images created as COS order, and then print them in FRONTIER.
Set the media in the drive.
In the [OUTPUT] field, select the FRONTIER
device.
In the [INPUT] field, click the icon of the media
you inserted.
C45015
Select the FRONTIER
device.
Click the icon of the media you inserted.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
57/171
57
In the COS Print Service screen, check that
the image files are listed up in the [Order
Selection Column].
Click the [Order Regist.] button.
The Confirmation dialog appears.
Remove the media from the drive.
C45018
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
58/171
58
Click the [OK] button.
Registering of order is completed.
Print the registered images in FRONTIER. (See 4.4 Printing in
FRONTIER on page 36.)
(FRONTIER 350/370/390) (FRONTIER 330/340)
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
59/171
59
To cancel the COS Print Service screen
You can perform regular DSC printing by canceling the COS Print Service screen.
Click the [Free Order] button.
The normal DSC Print Service screen
appears. There, you can process the images
without order file.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
60/171
60
5.2.3 DPOF Print Service Screen
In the order specified by the digital cameras DPOF, the registration is automatically performedaccording to the (DPOF). (Files are automatically recognized).
No. Item Description
1 DPOF Icon In the case of the DPOF order, this icon appears.
2 Order SelectionColumn
[Image file name]:Image file names registered in the DPOF order file.
[Print Qty]:Number of prints registered in the DPOF order file.
[Service type]:Service type registered in the DPOF order file.
[Front printing]:Front printing registered in the DPOF order file. [Yes] appears only when it isspecified.
[Cropping]:Cropping registered in the DPOF order file. [Yes] appears only when it is
specified.[Index]:
Index Print registered in the DPOF order file. [Yes] appears only when it isspecified.
3 Print Qty Display The number of prints in each service that was selected in the Order Specificationcolumn.
4 DPOF Cancel In the case of the DPOF order, this button appears. To cancel the DPOF orderinformation, click this button to cancel it and to display the normal OrderSelection screen, where you can perform the order registration without order file.
5 Order Regist. Register the image files that are listed in the Order Specification column.
6 View and Order The 6-frame View and Order screen lets you review all the thumbnail images inthe Order Specification column before starting printing. The color can beadjusted automatically(digital still camera format) or manually.(See 4.3 View and Order Screen on page 34.)
1
2
3
5
4
6
7
8
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
61/171
61
5.2.4 DPOF Printing Procedures
Register the images created as DPOF digital camera, and then print them in FRONTIER.
Set the media in the drive.
In the [OUTPUT] field, select the FRONTIER
device.
7 Index/Large IndexPrint Setting
(Not used in DPOF service)In the case of the DPOF order, the index print is automatically created accordingto the order file.
8 Cancel Cancels the registration of the images files listed in the [Order SpecificationColumn], and control returns to the Printing screen.
No. Item Description
FD121
Select the FRONTIER
device.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
62/171
62
In the [INPUT] field, click the icon of the media
you inserted.
In the DPOF Print Service screen, check that
the image files are listed up in the [Order
Selection Column].
Click the [Order Regist.] button.
Click the icon of the media you inserted.
Click the image files.
Click the [Order Regist.] button.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
63/171
63
The Confirmation dialog appears.
Remove the media from the drive.
FD124
Click the [OK] button.
Registering of order is completed.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
64/171
64
Print the registered images in FRONTIER. (See 4.4 Printing in
FRONTIER on page 36.)
(FRONTIER 350/370/390) (FRONTIER 330/340)
To cancel the DPOF Print Service screen
You can perform regular DSC printing by canceling the DPOF Print Service screen.
Click the [DPOF Cancel] button.
The normal DSC Print Service screen
appears. There, you can process the images
without order file.
Click the
[DPOF Cancel] button.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
65/171
65
5.3.1 Changing of Media Drive Setting
Change the media icon that appears in the [INPUT] field in the Printing screen.(See 4.5.1
Changing of Media Drive Setting on page 40.)
5.3.2 Changing of Output Device Setting
Change the device name for FRONTIER. (See 4.5.2 Changing of Output Device Setting on page
42.)
5.3.3 Master Balance Adjustment
Change the master balance for Media Print.
In the Print Service - Administration screen,
click the [Master Balance] button.
In the Master Balance screen, change C, M, Y
and D values in the [Media Print] field.
5.3 Procedures for Changing Settings
Click the [Master Balance] button.
Change C, M, Y and D in the [Media Print] field.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
66/171
66
In the Master Balance screen, click the [OK]
button.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
67/171
67
6 CD Printing Service
In the Digital Camera Print Service screen, register the image files containing no order file, and
then do printing from digital cameras.
This screen processes the image files written to the CDR in the Data Writing Service.
(ex:FUJICOLOR CD, FDi CD)
6.1 CD Print Service Screen
No. Item Description
1 Order Number Shows the order number. This is incremented each time an order is registered.
2 Output Displays the currently selected output device.
3 Frame No. In the case of FUJICOLOR CD or DCF format, either all frames or each framecan be selected.
4 Print Qty Enter the number of prints in this box. If you create the index print only, enter 0in this box, and then specify number of index or large index prints in [12 Index/Large Index Print Setting].
5 Print Size Select print size. This information is registered to the system at the time of Pre-operational check in FRONTIER.
6 Resize Select resize type in printing.Fill-in: Fill the entire print size with the selected image; the image may be cut off
either horizontally or vertically.Fit-in: Fit the image within the print size as well as possible without cutting off
any of the image.No Resize: Print the image data without any resizing.
7 Help Displays the Help screen.
1 2 3 4 5 6 7
15 141622
20
18
19
17
21
8
10
9
11
13
12
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
68/171
68
8 Print Qty Display The number of prints in each service that was selected in the [OrderSpecification Column].
9 Print Qty buttons Up to 9 of the number of prints can be specified by clicking one of these numeralbuttons. The specified number appears in the [Order Specification Column].
10 Order Regist. Register the image files that are listed in the [Order Specification Column].
11 View and Order The 6-frame View and Order screen lets you review all the thumbnail images inthe [Order Specification Column] before starting printing. The color can beautomatically adjusted (digital still camera format) or manually.(See 4.3 View and Order Screen on page 34.)
12 Index/Large IndexPrint Setting
Select [Yes] or [No] to print index/large index prints and specify the number ofprints.To add the data on the front print, check the [DSC data] box.
Only Index Print Creation:If you create the index print only, spcify number of index or large index prints,while entering 0 in [Print Qty] box.
13 Order Reset Resets the images files listed and selected in the [Order Specification Column].
14 Cancel Cancels the registration of the image files listed in the [Order SpecificationColumn], and control returns to the printing screen.
15 Set Click this button to move the selected image files to the [Order SpecificationColumn].
16 Select All Click this button to select all images in the [File Name] column.
17 Order SpecificationColumn
[Image file name]:Names of registered image files
[Directory]:Name of the directory containing the image files
[Image No.]:Serial number of registered images
[Print Qty]:Number of prints
[Service type]:[CD-R Reprint] appears according to the image file format.
[Size]:Print size of registered image files
[Resize]:[Fill-in], [Fit-in] or [No resize] appears according to the selected resize type.
18 Search To know where the image files are located, use this button to display all imagesin the media.
19 File Name Click the files to be printed.
20 Directory To display the image files, click the folder in storage media.
21 Directory No. In the case of FUJICOLOR CD or DCF format, either all directories or anindividual directory can be selected.
22 HorizontalScroll Bar
If the image file name is long, the scroll bar appears.
No. Item Description
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
69/171
69
Register the order for images written to the CD in the Data Writing Service, and then print them in
FRONTIER.
Set the CD in the CD drive.
DS014
In the [OUTPUT] field, select the FRONTIER
device.
In the [INPUT] field, click the icon of the media
you inserted.
6.2 CD Printing Procedures
Select the [OUTPUT]
device.
Click the icon of the media you inserted.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
70/171
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
71/171
71
Specify if or not the index/large index is
outputted, and its output size, and then if the
DSC date is printed or not.
Select the resizing specification. (See 2.2(2)
Resize in Instruction Manual (Service
Specification).)
Specify if or not the index/large index is
outputted, size, and then if the DSC Date is
printed or not.
Select the resizing option.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
72/171
72
Click the [Set] button. The image files are listed
up in the [Order Specification Column].
Click the [Order Regist.] button.
Click the [View and Order] button. (See 4.3
View and Order Screen on page 34.)
Click the [Set] button.
To monitor the images
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
73/171
73
The Confirmation dialog appears.
Remove the media from the drive.
DS014-2
Click the [OK] button.
Registering of order is completed.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
74/171
74
Print the registered images in FRONTIER. (See 4.4 Printing in
FRONTIER on page 36.)
(FRONTIER 350/370/390) (FRONTIER 330/340)
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
75/171
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
76/171
76
In the Master Balance screen, click the [OK]
button.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
77/171
77
7 Backup Order Function
Backup Order Function is the function where you can store temporarily the orders from the external
application (Kiosk, etc.), and later can correct these orders by using the View and Order screen.
The device for backup order function is defined in the C:\FE\FEIN\InUkBackup.ini file. By default,
the following settings are used, You can also edit them according to your using environment.
[Backup Device]
Cnt=1
1=Print Service
2=DPC Print
3=NET
If you want to add KIOSK device, modify it as shown below.
[Backup Device]
Cnt=2
1=Print Service
2=KIOSK
Main Screen
By setting the Backup Order Function, [Backup Order] button, [Paper Surface] column and Backup
List switching buttons are added to the Printing Screen.
[Backup Order] button
[Paper Surface] columnBackup List switching buttons
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
78/171
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
79/171
79
Complete the order registration by using the
same procedures as DSC Printing. (See 4.2
DSC Printing Procedures on page 28.)
[Test Print] button is added to the function keyline in the View and Order screen(opened by
clicking of [View and Order] in print service
screen).
Click the [Test Print] button.
Registration is done. Click the [OK] button.
[Test Print] button is added.
Click.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
80/171
80
Registered order (with order No + T) is
displayed in the Printing screen.
Paper Surface Selection
The [Paper Surface Shows] check box is added to the Print Service- Administration screen. The
surface name is indicated with the print size name, so to identify it, we recommend that you register
the size with the indication such as alphabet showing the surface name.
Registered order (with order No + T).
[Paper Surface Show] field is added.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
81/171
81
Additional Items to Writing Service
[Output device Additional]
The following devices are added to the Digital Service Selection list.
[Picture Rotate]
The radio buttons selecting the upper side are added to the frames in the Image List screen.
Service Name Functions
FDi CD1
Three types of FDi CD are added. Additional data such viewer can be written.FDi CD2
FDi CD3
FDi CD with FCD FUJICOLOR CD with FDi CD(higher- or lower pixels)
Pro CD In this service the order uses the print size selected in the Print Size setup in filmscanning, while the original image size is adopted in the DCS Printing.
Radio buttons are added.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
82/171
82
To display these radio buttons, add the check mark to [Yes] box in [Picture Rotate] in the Writing
Service-Administration screen.
Check [Yes] box.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
83/171
83
8 Print-to-Print
Scan a photo with the flatbed scanner, and then print the scanned image.
8.1 Print-to-Print Service Screen
No. Item Description
1 Order Number Shows the order number that is incremented each time an order is registered.
2 Output Device Output device that had been set in the Print-to-Print Administration screen.
3 Admin. Click this icon to do the Print-to-Print Administration settings for the Print-to-Print screen.
4 Help Displays the Help screen.
5 TWAIN Source/ Scanner Type TWAIN source and Scanner type that had been set in the Print-to-PrintAdministration screen.
6 Pre Scan The pre-scan is done with the low-resolution reading, mainly for the purpose ofchecking the images size and scanned position before fine-scan. Set a photoand then click [Pre Scan] button.
7 Print Quantity When the scanned image appears in the [Image Preview] after the pre-scan, setthe number of prints.
8 Print Size Select a print size, and then adjust rotation, magnification and frame position forthe image to be fine-scanned.The magnification and position of the frame can also be adjusted by draggingeach corner of the rubber band toward the inside or outside of the image.
9 Without Margin By checking this box, the image will be printed as an actually scanned size.
10 Instax Check [Instax] box to apply sharpness effect in the [Instax] printing.
6
8
9
12
1110
1514
13
17
7
1
16
5 432
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
84/171
84
11 Fine Scan The fine-scan is done with the high-resolution reading.
12 Color BalanceAdjustment
When the scanned image appears in the [Image Preview] after the fine-scan,adjust the color balance and density if necessary. -15 to +15.
13 Apply Displays the image to which changed color balance has been applied.
14 Add Image toOrder
Click this button to add the scanned image to the order.The number of images that have been added to the order is displayed in the[Image Number] box.
15 Order Regist. When scanning in the order is completed, click this button to register the order.
16 Cancel Order Cancels scanning.
17 Return Returns to the Printing screen.
No. Item Description
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
85/171
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
86/171
86
Click [Pre Scan] button.
When the scanned image appears, set the print
quantity, and then select the print size.
Adjust the printing position by clicking the arrow
button in the [Frame Position] column or by
clicking the end of the rubber band.
Click.
Set the number of prints.
Select the print size.
Click.
Adjust the printing position.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
87/171
87
When the print size, frame position and image
magnification adjustment are completed, click
the [Fine Scan] button.
Adjust the color balance by changing C,M,Y and
D.
Key steps of CMYD : -15 to +15
The changed C, M, Y, and D values can be checked in
the Preview by clicking [Apply].
It is not necessary to scan again after the key
corrections are done.
Click the [Add image to Order] button to add the
scanned image to the order.
Click the [Fine Scan] button.
Adjust the color balance.
Click the [Add image to Order] button.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
88/171
88
Click the [Order Regist.] button to register the
image.
Click the [Return] button.
Registering of order is completed. Remove the
photo from the scanner, and store it in a safe
place.
Print the registered images in FRONTIER. (See 4.4 Printing in
FRONTIER on page 36.)
(FRONTIER 350/370/390) (FRONTIER 330/340)
Click.
Click.
Completion of Order Registration
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
89/171
89
Process the images in Imaging Controller.
Hyper-Retouching [C11] Variety-Printing [C10]
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
90/171
90
8.3.1 Changing of Media Drive Setting
Set up the executive file for driving the scanner. Normally this setting is not required once it is
selected.
In the Printing screen, click the [Admin.]
button.
In the Password dialog, enter DI, and then
click the [OK] button.
In the Print Service - Administration screen,
click the [Media Drive] button.
8.3 Procedures for Changing Settings
Click the [Admin.] button.
Click.
Enter DI.
Click the [Media Drive] button.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
91/171
91
In the Media Drive Setting screen, select the
icon and path for the Print-to-Print.
Click the [OK] button.
Icon File Path
PtoP C:\FE\scanner\scanapp.exe
Select the icon and path for the Print-to-Print.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
92/171
92
8.3.2 Changing of Print-to-Print Setting
Change the settings for the Print-to-Print.
In the Printing screen, click the [PtoP] icon.
In the Print-to-Print screen, click the [Admin.]
button.
Click the [PtoP] button.
Click.
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
93/171
93
Change the settings as shown in the following
table.
Before changing these settings, the flatbed scanner
must be connected and the specified TWAIN driver
be properly installed.
5, 6 and can be set only after the fine scan is completed.
No. Item Description
1 Output Device Select the output device from the Output Device pull-down menu.
2 Print Size Select the default print size from the Print Size pull-down menu.
3 TWAIN Source Select the TWAIN source from the TWAIN Source pull-down menu.Enter any of the following TWAIN sources.
Microtek Scanmaker 4:Microtek ScanWizard (32bit)EPSON Expression 1600/1680: EPSON TWAIN Pro (32bit)
4 Scanner Type Select the Scanner type from the Scanner Type pull-down menu.
5 Scanner Balance Adjust the master color balance for this service after the fine scan is completed.(Value: -99 to +99)
6 Monitor Balance Adjust the monitor color balance for this service after the fine scan is completed.(Value: -99 to +99)
7 Contrast Adjust the contrast for the highlight or the shadow part of the image after the finescan is completed. (Value: -5 to +5)
8 OK Sets all settings then returns to the main screen
9 Cancel Cancels all settings then returns to the main screen.
IMPORTANT
2
34
8
9
7
6
5 1
-
7/21/2019 Fuji Frontier 330-340-350-370-390 - Di Print-data Writing Service Software Ver.5.0 First Edition Rulit Net 158097
94/171
94
9 CD/Media Writing Service
In the CD/Media Writing Service, you can write the image data from film-scanning or DSC
image data, to CD-R or various media.
Register the order(s) for print