galvanised steel helical dead-end medium spans3tcable.hr/doc/pasiva/oprema za montazu zracnih...

7
01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected] Product information Galvanised steel helical dead-end Medium spans 100m – 250m Helical dead-ends are installed on ADSS cables over medium spans (100 to 250 meters). They consist of 4 armour rods installed as a direct protection on the cable and a spiral dead-end used as an anchor and installed on the armour rod protection. Each helical dead-end set is including: - 4 armour rods - 1 helical dead-end In addition to this helical dead-end, different accessories should be ordered depending on the pole structure and configuration: - 1 thimble - 1 extension link or 1 turnbuckle - 1 pole bracket - 1 fixing method for the bracket to the pole (bolt, pole banding)

Upload: nguyentuyen

Post on 25-Apr-2018

220 views

Category:

Documents


4 download

TRANSCRIPT

01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice

Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]

Product information Galvanised steel helical dead-end

Medium spans 100m – 250m

Helical dead-ends are installed on ADSS cables over medium spans (100 to 250 meters).

They consist of 4 armour rods installed as a direct protection on the cable and a spiral dead-end used as an

anchor and installed on the armour rod protection.

Each helical dead-end set is including:

- 4 armour rods

- 1 helical dead-end

In addition to this helical dead-end, different accessories should be ordered depending on the pole structure and

configuration:

- 1 thimble

- 1 extension link or 1 turnbuckle

- 1 pole bracket

- 1 fixing method for the bracket to the pole (bolt, pole banding)

01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice

Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]

Product information Galvanised steel helical dead-end

Medium spans 100m – 250m

Helical dead-end Armour rod Designation Capacity Wire Ø Qty of Length mm Wire Ø Qty of Length mm Weight

mm mm wires L L1 mm wires L M kg

GSDE AR 1050 white

10,5-11,3 3,25 5 820 533 2,18 (3x3)+5 = 14

1015 330 1,530

GSDE AR 1150 yellow

11,5-12,6 3,25 5 820 533 2,18 (3x4)+3 = 15

1015 330 1,570

GSDE AR 1250 black

12,5-13,6 3,25 5 820 533 2,18 4x4 = 16

1015 330 1,610

GSDE AR 1290

green 12,9-14,6 3,25 5 820 533 2,18

4x4 = 16

1015 330 1,625

GSDE AR 1350

blue 13,5-14,5 3,25 5 820 533 2,18

(3x4)+5 = 17

1015 330 1,655

GSDE AR 1420

red 14,2-15,2 3,25 5 820 533 2,18

(3x5)+3 = 18

1015 330 1,665

GSDE AR 1530 brown

15,3-16,6 3,25 5 820 533 2,18 (3x5)+3 = 18

1015 330 1,685

Hot dip galvanised steel.

Packaged in pairs of sets (1 set = 1 helical dead-end + 4 armour rods secured together with black plastic ties).

01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice

Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]

Thimble: To be ordered separately.

Product information Galvanised steel helical dead-end

Medium spans 100m – 250m

Associated products: Thimbles

Thimble type A

U shaped thimble with pin bolt

Hot dip galvanised steel

Weight : 0.32 kg

Can be used with any extension link

Thimble type B

C shaped thimble

Hot dip galvanised steel

Weight : 0.12 kg

Can be used with any extension link

Thimble type C

Aluminium thimble with pin bolt

Aluminium

Weight : 0.35 kg

Can be used with any extension link

01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice

Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]

Product information Galvanised steel helical dead-end

Medium spans 100m – 250m

Associated products: Extension links

Turnbuckle M12 30/04

Eye Ø : 20mm

Length between eyes : 230 – 310mm

Min. breaking load : 3000 daN

Hot dip galvanised steel

Packaging : carton of 50 units

Weight : 0.5 kg

Turnbuckle M16

Eye Ø : 25mm

Length between eyes : 290 – 380mm

Supplied with 2 nuts

Min. breaking load : 5000 daN

Hot dip galvanised steel

Packaging : carton of 25 units

Weight : 0.85 kg

Extension link xxx mm

Length between securing points : 300mm

Hot dip galvanised steel

Packaging : bag of 10 units

Weight : 1.25 kg

01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice

Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]

Product information Galvanised steel helical dead-end

Medium spans 100m – 250m

Associated products: Shackles

The shackle is used for securing the extension link or turnbuckle on any fixing point on the pole.

Shackle M10 SH600

Min. breaking load : 1800 daN

Hot dip galvanised steel

Packaging : carton of 50 units

Weight : 0.12 kg

Shackle M12 with safety pin

Min. breaking load : 6000 daN

Hot dip galvanised steel

Packaging : carton of 25 units

Weight : 0.36 kg

Shackle M16 with safety pin

Min. breaking load : 9750 daN

Hot dip galvanised steel

Packaging : carton of 25 units

Weight : 0.36 kg

Manille M16 avec goupille

01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice

Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]

Product information Galvanised steel helical dead-end

Medium spans 100m – 250m

Associated products: Pole brackets

Pin type bracket 7/05

Securing with 2 pole bands.

Min. breaking load : 2000 daN

Hot dip galvanised steel

Packaging : bags of 25 units

Weight : 0.35 kg

Universal pole bracket UPB

Securing with 2 pole bands or 1 bolt Ø 14 or 16mm.

Min. breaking load : 3000 daN

High strength aluminium alloy

Packaging : carton boxes of 30 units

Weight : 0.2 kg

Pole collar 7/00

Direct fixing on round poles with Ø around 110mm

Min. breaking load : 5000 daN

Supplied unassembled

Hot dip galvanised steel

Packaging : 10 units

Weight : 2.42 kg

Pole collar 7/01

Direct fixing on round poles with Ø around 135mm

Min. breaking load : 5000 daN

Hot dip galvanised steel

Packaging : 10 units

Weight : 3.52 kg

01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice

Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]

Product information Galvanised steel helical dead-end

Medium spans 100m – 250m

Associated products: Securing on poles

Bolts

Bolt BH14x225/145

Ø 14mm – Total / Threaded lengths : 225mm / 145mm

Supplied with 1 nut and 1 curved washer 70x35x5mm

Hexagonal head

Hot dip galvanised steel

Packaging : bags of 50 units

Weight : 0.38 kg

Bolt BH16x300/100

Ø 16mm - Total / Threaded lengths : 300mm / 100mm

Supplied with 1 nut, 1 flat washer 50x50x5mm and

1 flat washer 75x50x5mm

Hexagonal head

Hot dip galvanised steel

Packaging : bags of 25 units

Weight : 0.68 kg

Banding

Pole banding 20x0.7mm SB207

20x0.7mm band - 50m roll

Supplied in plastic dispenser

Stainless steel AISI304

Packaging : carton of 5 rolls

Weight : 5.1 kg

Heavy type buckle 20mm BIB20

Heavy type buckle adapted to 20mm pole band

Stainless steel AISI304

Packaging : bag of 100 units

Weight : 1 kg (per bag)

Band installation tool BTS

Screw type

Protected steel

Packaging : unit

Weight : 2 kg