gates and doors automation - folim · rolling shutters. 14 barrier automation. 16 electronics and...

Gates and doors automationCatalogue and price list07/2007

lli, M

KING gatesVia A. Malignani, 42 - 33077 Sacile (PN) ITALY

Ph. +39 0434 737082 - Fax +39 0434 783382

e-mail: [email protected] web: www.king-gates.com

Technical partner DIEGM Robotics - University of Udine Products - made in Italy

Gates and doors automationCatalogue and price list

AUTOMATION

Automation for sliding gates . 2

Automation for swing gates. 4

KING gatesKING gatesKING professional choice

gatesprofessional choice

Kit for sectional doors . 18 - Kit for overhead doors . 19

Kit for balanced shutters . 19 - Kit for sliding gates . 20

Kit for swing gates . 20/21

Automation for sectionaland overhead doors. 10

Automation for overhead doors. 12

Automation for balanced rolling shutters. 14

Barrier automation. 16

ELECTRONICS AND ACCESSORIES

Electronics

Radio transmitter Radio receivers. 24

Selectors and digital keyboardsMagnetic loop detectors. 25

Photocells

Safety devices

Flashing lamps

OK-KIT

AUTOMATION

Automation for sliding gates . 2

Automation for swing gates. 4

Kit for sectional doors . 18 - Kit for overhead doors . 19

Kit for balanced shutters . 19 - Kit for sliding gates . 20

Kit for swing gates . 20/21

Automation for sectionaland overhead doors. 10

Automation for overhead doors. 12

Automation for balanced rolling shutters. 14

Barrier automation. 16

ELECTRONICS AND ACCESSORIES

Electronics

Radio transmitter Radio receivers. 24

Selectors and digital keyboardsMagnetic loop detectors. 25

Photocells

Safety devices

Flashing lamps

OK-KIT

CRIS 100

STAR D 100 STAR D 400

BAT 08

SILENT AND PRECISE MECHANICSReliability and safety are at the base of the mechanical components:produced with sturdy materials, they turn on large ball bearings that areattached to die-cast aluminium roller housings. The internal gear hasinvolute teeth. This special construction allows maximum contact betweenthe worm screw and the gear. The tooth wraps around the screw whereasin traditional construction the parts in contact add up to just a few millimetres.The result? Quiet movement, high performance, no wear.

SAFE AND SIMPLE RELEASEThe sturdy handle in die cast aluminium with personalized key allows manual opening of the gate and disables the electronic apparatus, preventing undesired movement.

RELIABILITY OVER TIME 4 Kg of die cast aluminium, ABS plastic parts with anti-UVA ray treatment and pure polyester painting make Dynamos a solid automation that can stand up to any sort of weather.

SMART ELECTRONICS The control unit is built-in and protected inside the reduction gear.It is easily programmable, and it ensures protection against crushing byreversing directions if there is an obstacle thanks to the "easy-control"innovative technology. The gradual "soft start" and the deceleration at endof travel allow gentle, safe movement of the gate. The presence of an optionalNO channel allows radio control of other systems (e.g. home lighting) with the third key of the transmitter.

OPERATES EVEN DURING A POWER OUTAGE The 24 V DC version can be equipped with tow backup batteries inserted in the automation device that ensure operation even if the power supply is disrupted.The charging card is built-in as standard on all the 24Vdc Star D400 and Star D500 control units.

CodeDynamos 500

Description

AVAILABLE VERSIONS

Dynamos 24/350

Irreversible 230 Vac, incorporate control unit and radio receiver 433.92 MHz, max 500 kg

Irreversible 24 Vdc, incorporate control unit and radio receiver 433.92 MHz, basic elettronics, max 350 kg

Dynamos 24/600 Irreversible 24 Vdc, incorporate control unit and radio receiver 433.92 MHz, max 600 kg(battery operation guaranteed for gates up to 400 kg and for the first four hours of a power outage)

Power supply 230

Motor power supply 230

Motor power 200

Input current 1,3

-20 ÷ +55Operating temperature

140Overload cut-out

325x185x274

Work cycle

(Vac 50Hz)

(Vac/Vdc)

(m/min)

Dimensions

Automation weight

Gate max. weight

-20 ÷ +55

325x185x274

230 Vac

TECHNICAL DATA Dyn 500 Dyn 1000

Code Description

CRIS 400

STAR D 100

Rack in galvanized steel 22x22x1000

Spare control unit for DYNAMOS 230

STAR D 400

BAT 08

Spare control unit for DYNAMOS 24/600 and 24/350 EV

Backup batteries to be inserted in Dynamos 24(for gates up to 400 kg)

ACCESSORIES FOR DYNAMOS

CRIS 200 Rack in galvanized steel complete with screws and spacers 30x8x1000

CRIS 100 Nylon rack with metal inserts with 6 joints complete with screws, 28x20x1000

STAR D 500 Spare control unit for DYNAMOS 24/350

Dynamos 24/350 EV Irreversible 24 Vdc, incorporate control unit and radio receiver 433.92 MHz, max 350 kg

Dynamos 1000 Irreversible 230 Vac, incorporate control unit and radio receiver 433.92 MHz, max 1000 kg

AUTOMATION FOR SLIDING GATESDYNAMOSIrreversible electro-mechanical reduction gear with "easy-control" anti-crushing system. 230Vac and 24 Vdc

24 Vdc

-20 ÷ +55

9 ÷ 15

325x185x274

Dyn 24/600

-20 ÷ +55

9 ÷ 15

325x185x274

Dyn 24/350

CRIS 200

CRIS 100

STAR D 100 STAR D 400

BAT 08

SILENT AND PRECISE MECHANICSReliability and safety are at the base of the mechanical components:produced with sturdy materials, they turn on large ball bearings that areattached to die-cast aluminium roller housings. The internal gear hasinvolute teeth. This special construction allows maximum contact betweenthe worm screw and the gear. The tooth wraps around the screw whereasin traditional construction the parts in contact add up to just a few millimetres.The result? Quiet movement, high performance, no wear.

SAFE AND SIMPLE RELEASEThe sturdy handle in die cast aluminium with personalized key allows manual opening of the gate and disables the electronic apparatus, preventing undesired movement.

RELIABILITY OVER TIME 4 Kg of die cast aluminium, ABS plastic parts with anti-UVA ray treatment and pure polyester painting make Dynamos a solid automation that can stand up to any sort of weather.

SMART ELECTRONICS The control unit is built-in and protected inside the reduction gear.It is easily programmable, and it ensures protection against crushing byreversing directions if there is an obstacle thanks to the "easy-control"innovative technology. The gradual "soft start" and the deceleration at endof travel allow gentle, safe movement of the gate. The presence of an optionalNO channel allows radio control of other systems (e.g. home lighting) with the third key of the transmitter.

OPERATES EVEN DURING A POWER OUTAGE The 24 V DC version can be equipped with tow backup batteries inserted in the automation device that ensure operation even if the power supply is disrupted.The charging card is built-in as standard on all the 24Vdc Star D400 and Star D500 control units.

CodeDynamos 500

Description

AVAILABLE VERSIONS

Dynamos 24/350

Irreversible 230 Vac, incorporate control unit and radio receiver 433.92 MHz, max 500 kg

Irreversible 24 Vdc, incorporate control unit and radio receiver 433.92 MHz, basic elettronics, max 350 kg

Dynamos 24/600 Irreversible 24 Vdc, incorporate control unit and radio receiver 433.92 MHz, max 600 kg(battery operation guaranteed for gates up to 400 kg and for the first four hours of a power outage)

Power supply 230

Motor power 200

Input current 1,3

140Overload cut-out

325x185x274

Work cycle

(Vac 50Hz)

(Vac/Vdc)

(m/min)

Dimensions

Automation weight

Gate max. weight

-20 ÷ +55

325x185x274

230 Vac

TECHNICAL DATA Dyn 500 Dyn 1000

Code Description

CRIS 400

STAR D 100

Rack in galvanized steel 22x22x1000

Spare control unit for DYNAMOS 230

STAR D 400

BAT 08

Spare control unit for DYNAMOS 24/600 and 24/350 EV

Backup batteries to be inserted in Dynamos 24(for gates up to 400 kg)

ACCESSORIES FOR DYNAMOS

CRIS 200 Rack in galvanized steel complete with screws and spacers 30x8x1000

CRIS 100 Nylon rack with metal inserts with 6 joints complete with screws, 28x20x1000

STAR D 500 Spare control unit for DYNAMOS 24/350

Dynamos 24/350 EV Irreversible 24 Vdc, incorporate control unit and radio receiver 433.92 MHz, max 350 kg

Dynamos 1000 Irreversible 230 Vac, incorporate control unit and radio receiver 433.92 MHz, max 1000 kg

AUTOMATION FOR SLIDING GATESDYNAMOSIrreversible electro-mechanical reduction gear with "easy-control" anti-crushing system. 230Vac and 24 Vdc

24 Vdc

-20 ÷ +55

9 ÷ 15

325x185x274

Dyn 24/600

-20 ÷ +55

9 ÷ 15

325x185x274

Dyn 24/350

CRIS 200

AUTOMATION FOR SWING GATES - EXTERNAL INSTALLATION

JETIrreversible electro-mechanical reduction gear. Max. dimensions of gate leaf 3 m and 600 kg. 230Vac and 24 Vdc.

230 Vac

TECHNICAL DATA Jet 230 F Jet 230 S Jet 24

24 Vdc

Description

Rear screw-in bracket (pcs./package 2)

Long rear bracket L=220mm (2pz./conf)

Mechanical limit switches (pcs./package 2)

Power supply 230

Motor power 200

100x820x110

Work cycle

(Vac 50Hz)

(Vac/Vdc)

Dimensions

Automation weight

Max. leaf dimensions

(m/Kg)

3m / 600Kg

-20 ÷ +55

100x820x110

3m / 600Kg

-20 ÷ +55

0,013÷0,020

100x820x110

3m / 600Kg

ACCESSORIES FOR JET

STA Front screw-in bracket (pcs./package 2)

CJ230 Cabled connector with 1,2m of cable for 230Vac motors

CJ24 Cabled connector with 1,2m of cable for 24Vdc motors

DESIGN AND TECHNOLOGYDesigned to enhance any sort of gate, it fits into any setting. The elegant, wrap-around line of the two die.cast aluminium shells makes Jet an original example of Italian-made creativity.

SAFE AND CONVENIENT RELEASEThe manual-release handle is made of die cast aluminium with personalized key and ABS lock cover. It is located on the upper part of the reduction gear to allow immediate, practical use with minimum effort.

EASY INSTALLATION Thanks to the extractable connector, installation and maintenance are quick and easy. The capacitor is built into the reduction gear, whereas the mobile limit switches allow quick adjustment of travel.

SILENT AND RELIABLE MECHANICSThe heart of Jet is the mechanical transmission, designed without cutting any corners to ensure the utmost reliability and to allow a range of use that's wider than the standard. All of the components turn on ball bearings which eliminate friction and noise. The use of steel and bronze ensures duration and reliability even in severe conditions.

Jet 230 F

Description

Jet 230 S

Jet 24

Irreversible 230 Vac, fast with limit switch in opening

Irreversible 230 Vac, slow with limit switch in opening

Irreversible 24 Vdc with limit switch in opening

New: Top quality in the “Jet Top” version with protective brushes.Ideal in the presence of sand or dust, rendering the internal mechanics indestructible over time.

Available in the two-colour version, grey and black

AVAILABLE VERSIONS

BL Black version. Polyester painting - black colour.To order, indicate the abbreviation "BL" after the reduction gear code Example: Jet 230 BL

Code Description

TOP Protective brushes on the rolled screwTo order, indicate the abbreviation "TOP" after the reduction gear code. Example: Jet 230 TOP

APPLICATIONS

STP STA BK 01

AUTOMATION FOR SWING GATES - EXTERNAL INSTALLATION

JETIrreversible electro-mechanical reduction gear. Max. dimensions of gate leaf 3 m and 600 kg. 230Vac and 24 Vdc.

230 Vac

TECHNICAL DATA Jet 230 F Jet 230 S Jet 24

24 Vdc

Description

Rear screw-in bracket (pcs./package 2)

Long rear bracket L=220mm (2pz./conf)

Mechanical limit switches (pcs./package 2)

Power supply 230

Motor power 200

100x820x110

Work cycle

(Vac 50Hz)

(Vac/Vdc)

Dimensions

Automation weight

(m/Kg)

3m / 600Kg

-20 ÷ +55

100x820x110

3m / 600Kg

-20 ÷ +55

0,013÷0,020

100x820x110

3m / 600Kg

ACCESSORIES FOR JET

STA Front screw-in bracket (pcs./package 2)

CJ230 Cabled connector with 1,2m of cable for 230Vac motors

CJ24 Cabled connector with 1,2m of cable for 24Vdc motors

DESIGN AND TECHNOLOGYDesigned to enhance any sort of gate, it fits into any setting. The elegant, wrap-around line of the two die.cast aluminium shells makes Jet an original example of Italian-made creativity.

SAFE AND CONVENIENT RELEASEThe manual-release handle is made of die cast aluminium with personalized key and ABS lock cover. It is located on the upper part of the reduction gear to allow immediate, practical use with minimum effort.

EASY INSTALLATION Thanks to the extractable connector, installation and maintenance are quick and easy. The capacitor is built into the reduction gear, whereas the mobile limit switches allow quick adjustment of travel.

SILENT AND RELIABLE MECHANICSThe heart of Jet is the mechanical transmission, designed without cutting any corners to ensure the utmost reliability and to allow a range of use that's wider than the standard. All of the components turn on ball bearings which eliminate friction and noise. The use of steel and bronze ensures duration and reliability even in severe conditions.

Jet 230 F

Description

Jet 230 S

Jet 24

Irreversible 230 Vac, fast with limit switch in opening

Irreversible 230 Vac, slow with limit switch in opening

Irreversible 24 Vdc with limit switch in opening

New: Top quality in the “Jet Top” version with protective brushes.Ideal in the presence of sand or dust, rendering the internal mechanics indestructible over time.

Available in the two-colour version, grey and black

AVAILABLE VERSIONS

BL Black version. Polyester painting - black colour.To order, indicate the abbreviation "BL" after the reduction gear code Example: Jet 230 BL

Code Description

TOP Protective brushes on the rolled screwTo order, indicate the abbreviation "TOP" after the reduction gear code. Example: Jet 230 TOP

APPLICATIONS

STP STA BK 01

LINEARAUTOMATION FOR SWING GATES - EXTERNAL INSTALLATION

Irreversible electro-mechanical reduction gear. Max. dimensions of gate leaf 2,5 m and 300 kg. 230Vac

TECHNICAL DATA Linear 300

Power supply 230

Motor power 200

1,5Power input

100x820x110

Work cycle

(Vac 50Hz)

Dimensions

Automation weight

(m/Kg)

2,5 m / 300 Kg

SIMPLE AND RELIABLELinear is the electromechanical operator for swinging gates with a maximum dimension of 2.5 metres and 300 Kg.It is mechanically reliable thanks to the telescopic piston transmission and the motor with 140 °C thermal protection.

CONVENIENT RELEASEThis manual operation in case of a power failure is simple and intuitive with the release handle to be connected on the top part of the operator. The plastic protection of the release pin guarantees operation even if there is ice.

CONVENIENT INSTALLATIONWith Linear, installation times are reduced to a minimum. In fact, the operator is supplied with fastening brackets, front and read, to be screwed on. The 1.5 m pre-wired cable makes the electrical connection easy.

INEXPENSIVE SOLUTIONEven though maintaining a high quality standard, Linear offers the most inexpensive solution for automating swinging gates. Also available in a kit complete with control and signalling accessories.

Linear 300 SX

Description

Linear 300 DX

Irreversible electro-mechanical reduction gear 230Vac, left version

Irreversible electro-mechanical reduction gear 230Vac, right version

AVAILABLE VERSIONS

Right version

Left version

-20 ÷ +55Operating temperature (°C)

LINEARAUTOMATION FOR SWING GATES - EXTERNAL INSTALLATION

Irreversible electro-mechanical reduction gear. Max. dimensions of gate leaf 2,5 m and 300 kg. 230Vac

TECHNICAL DATA Linear 300

Power supply 230

Motor power 200

1,5Power input

100x820x110

Work cycle

(Vac 50Hz)

Dimensions

Automation weight

(m/Kg)

2,5 m / 300 Kg

SIMPLE AND RELIABLELinear is the electromechanical operator for swinging gates with a maximum dimension of 2.5 metres and 300 Kg.It is mechanically reliable thanks to the telescopic piston transmission and the motor with 140 °C thermal protection.

CONVENIENT RELEASEThis manual operation in case of a power failure is simple and intuitive with the release handle to be connected on the top part of the operator. The plastic protection of the release pin guarantees operation even if there is ice.

CONVENIENT INSTALLATIONWith Linear, installation times are reduced to a minimum. In fact, the operator is supplied with fastening brackets, front and read, to be screwed on. The 1.5 m pre-wired cable makes the electrical connection easy.

INEXPENSIVE SOLUTIONEven though maintaining a high quality standard, Linear offers the most inexpensive solution for automating swinging gates. Also available in a kit complete with control and signalling accessories.

Linear 300 SX

Description

Linear 300 DX

Irreversible electro-mechanical reduction gear 230Vac, left version

Irreversible electro-mechanical reduction gear 230Vac, right version

AVAILABLE VERSIONS

Right version

Left version

-20 ÷ +55Operating temperature (°C)

No more difficult joints! SuperIntro NewNew

INVISIBLE COMFORTThe recessed installation makes automation completely invisible so that the appearance of the gate is not modified.

QUICK AND SIMPLE RELEASEIf the re is no electricity, the gate can be opened immediately thanks to the provided release lever, which can be easily inserted and turned with the slightest effort even if there is ice.

DESIGNED TO LAST OVER TIME AND IN ANY CONDITIONSThe solid die cast aluminium, the use of bronze and fine metals, and the IP67 degree of watertight seal ensure reliable operation and very little maintenance.

ELECTRONIC SAFETYThe Star control units make Intro a safe, precise automation. Prevention against crushing is ensured by the "easy-control" function. Also, you can set motor torque and the point of end of travel deceleration so that the gate moves fluidly and constantly.

Power supply

Motor power supply

Motor power

Input current

Condenser

Operating temperature

Overload cut-out

Level of protection

Torque

Open-close times

Work cycle

(Vac 50Hz)

(Vac/Vdc)

Dimensions

Automation weight

-20 ÷ +55

340x170x410

-20 ÷ +55

340x170x410

230 Vac

TECHNICAL DATA Intro 230

24 Vdc

Intro 24

CodeIntro 230

Description

AVAILABLE VERSIONS - MOTOR-GEARS

Code Description

AVAILABLE VERSIONS - FOUNDATION BOX

Code Description

ACCESSORIES FOR INTRO

Intro 24

Irreversible reduction gear 230 Vac, IP67 with connection lever (Cable Length=250cm)

Irreversible reduction gear 24 Vdc, IP67 with connection lever (Cable Length=130cm)

SuperIntro 230 Pair of irreversible reduction gears 230 Vac, IP67 with connection lever (1° motor with a cable 2,5 m long - 2° motor with a cable 9 m long)

IntroBox Foundation box in galvanized steel with release system

IntroBox S Foundation box in inox steel with release system

BK 10 Mechanical limit switches for opening (pcs./package 2) BK 20 Mechanical limit switches for closing (pcs./package 2) IN 180 Kit for leaf opening at 180°

AUTOMATION FOR SWING GATES - UNDERGROUND INSTALLATION

INTROIrreversible electromechanical reduction gear. max. dimensions of leaf 2.5 m and 400 kg. 230Vac e 24Vdc

BK 10 BK 20

1° motor with a cable 2,5 m long

+A package of "Super Intro" contains a motor reduction gear with a 2.5-metre cable and 1 motor reduction gear with a cable that's 9 metres long

No more difficult joints! SuperIntro

INVISIBLE COMFORTThe recessed installation makes automation completely invisible so that the appearance of the gate is not modified.

QUICK AND SIMPLE RELEASEIf the re is no electricity, the gate can be opened immediately thanks to the provided release lever, which can be easily inserted and turned with the slightest effort even if there is ice.

DESIGNED TO LAST OVER TIME AND IN ANY CONDITIONSThe solid die cast aluminium, the use of bronze and fine metals, and the IP67 degree of watertight seal ensure reliable operation and very little maintenance.

ELECTRONIC SAFETYThe Star control units make Intro a safe, precise automation. Prevention against crushing is ensured by the "easy-control" function. Also, you can set motor torque and the point of end of travel deceleration so that the gate moves fluidly and constantly.

Power supply

Motor power supply

Motor power

Input current

Condenser

Overload cut-out

Level of protection

Torque

Open-close times

Work cycle

(Vac 50Hz)

(Vac/Vdc)

Dimensions

Automation weight

-20 ÷ +55

340x170x410

-20 ÷ +55

340x170x410

230 Vac

TECHNICAL DATA Intro 230

24 Vdc

Intro 24

CodeIntro 230

Description

AVAILABLE VERSIONS - MOTOR-GEARS

Code Description

AVAILABLE VERSIONS - FOUNDATION BOX

Code Description

ACCESSORIES FOR INTRO

Intro 24

Irreversible reduction gear 230 Vac, IP67 with connection lever (Cable Length=250cm)

Irreversible reduction gear 24 Vdc, IP67 with connection lever (Cable Length=130cm)

SuperIntro 230 Pair of irreversible reduction gears 230 Vac, IP67 with connection lever (1° motor with a cable 2,5 m long - 2° motor with a cable 9 m long)

IntroBox Foundation box in galvanized steel with release system

IntroBox S Foundation box in inox steel with release system

BK 10 Mechanical limit switches for opening (pcs./package 2) BK 20 Mechanical limit switches for closing (pcs./package 2) IN 180 Kit for leaf opening at 180°

AUTOMATION FOR SWING GATES - UNDERGROUND INSTALLATION

INTROIrreversible electromechanical reduction gear. max. dimensions of leaf 2.5 m and 400 kg. 230Vac e 24Vdc

BK 10 BK 20

1° motor with a cable 2,5 m long

+A package of "Super Intro" contains a motor reduction gear with a 2.5-metre cable and 1 motor reduction gear with a cable that's 9 metres long

AUTOMATION FOR SECTIONAL AND OVERHEAD DOORS

ROLLSIrreversible electro-mechanical reduction gear for sectional doors up to 17m or for overhead doors up to 14 m

Power supply

Max. thrust

Input current

Max dimensions sectional door

Max dimensions overhead door

Transmission gear

Speed 9 ÷ 16 cm/s

Work cycle

(Vac 50Hz)

Motorgear dimensions

Slide thickness

Limit switch

650 1200

0,8 1,2

-20 ÷ +55

M8 Z18

414x264x110

Encoder with mechanical stop

TECHNICAL DATA Rolls 650 Rolls 1200

Rolls 650

Description

MOTOR-GEARS

Rolls 650 Plus

Irreversible reduction gear, 230 Vac, motor 24 Vdc, thrust 650 N, with control unit and radio receiver.

Irreversible reduction gear, 230 Vac, motor 24 Vdc, thrust 650 N, with control unit and radio receiver

SLIDES

GRB 23

Pre-assembled slide (thickness 37), with belt, length 3 metres

Pre-assembled slide (thickness 37), with belt, length 3 metres in 2 pieces (2 x 1,5m)

and built-in buffer battery 24V (2 x 12V - 1,2Ah)

Rolls 1200 Irreversible reduction gear, 230 Vac, motor 24 Vdc, thrust 1200 N, with control unit and radio receiver.

The automation Rolls requires flashers with 24Vdc lamp “Idea 24” and “Idea 24 Plus”

GRB 4 Pre-assembled slide (thickness 37), with belt, length 4 metres in 2 pieces (3 m + 1m)

COMFORT AND TECHNOLOGYThe transmission with belt is silent and reliable, while the 18 teeth gear prevent any slipping of the belt. The pre-assembled 3 or 4 meters long slides optimize the installation time. The encoder control systemminimize the phase of set-up. The buffer batteries allow the functioning even during a black-out.

INNOVATIVE MANUAL RELEASE SYSTEMThe innovative manual release system has been projected for working both with the cord linked to the carriage and with the door-handle. The manual activation by cord, without the installation of the door-handle system, allows the possibility of holding the automation in released condition. It allows to close and open the door without the automatic re-hook of the carriage. With this system, during a black-out, the user can choose to close the door and then open it without any release operation or to close the door and holding it re-hooked till the next release operation from inside.

Code Description

ARC 01

ACCESSORIES

SRO 01

Adaptor for overhead doors with counterweights

Additional fastening brackets kit

SBLO 01

BAT 12K

External unlocking system (to be applied on handle lock)

Batteries kit 24V (2 x 12V - 1,2Ah) with battery charge card

Star GDO 100 Spare control unit for Rolls with radio receiver 433,92 MHz

Code Description

LONG 01 Side element for fixing swinging arm ARC 01 to door

BRILLIANT DESIGN The rotating opening of the central cover makes easy the access to the control board. The electronic unit has a plastic cover with simple buttons, It allows an easy and intuitive use. The location of the buffer batteries is in the backside of the base, It’s strong and invisible.

Irreversible gear motor for sectional door up to 17 m and overhead door up to 14 m

AUTOMATION FOR SECTIONAL AND OVERHEAD DOORS

ROLLSIrreversible electro-mechanical reduction gear for sectional doors up to 17m or for overhead doors up to 14 m

Power supply

Max. thrust

Input current

Max dimensions sectional door

Max dimensions overhead door

Transmission gear

Speed 9 ÷ 16 cm/s

Work cycle

(Vac 50Hz)

Motorgear dimensions

Slide thickness

Limit switch

650 1200

0,8 1,2

-20 ÷ +55

M8 Z18

414x264x110

Encoder with mechanical stop

TECHNICAL DATA Rolls 650 Rolls 1200

Rolls 650

Description

MOTOR-GEARS

Rolls 650 Plus

Irreversible reduction gear, 230 Vac, motor 24 Vdc, thrust 650 N, with control unit and radio receiver.

Irreversible reduction gear, 230 Vac, motor 24 Vdc, thrust 650 N, with control unit and radio receiver

SLIDES

GRB 23

Pre-assembled slide (thickness 37), with belt, length 3 metres

Pre-assembled slide (thickness 37), with belt, length 3 metres in 2 pieces (2 x 1,5m)

and built-in buffer battery 24V (2 x 12V - 1,2Ah)

Rolls 1200 Irreversible reduction gear, 230 Vac, motor 24 Vdc, thrust 1200 N, with control unit and radio receiver.

The automation Rolls requires flashers with 24Vdc lamp “Idea 24” and “Idea 24 Plus”

GRB 4 Pre-assembled slide (thickness 37), with belt, length 4 metres in 2 pieces (3 m + 1m)

COMFORT AND TECHNOLOGYThe transmission with belt is silent and reliable, while the 18 teeth gear prevent any slipping of the belt. The pre-assembled 3 or 4 meters long slides optimize the installation time. The encoder control systemminimize the phase of set-up. The buffer batteries allow the functioning even during a black-out.

INNOVATIVE MANUAL RELEASE SYSTEMThe innovative manual release system has been projected for working both with the cord linked to the carriage and with the door-handle. The manual activation by cord, without the installation of the door-handle system, allows the possibility of holding the automation in released condition. It allows to close and open the door without the automatic re-hook of the carriage. With this system, during a black-out, the user can choose to close the door and then open it without any release operation or to close the door and holding it re-hooked till the next release operation from inside.

Code Description

ARC 01

ACCESSORIES

SRO 01

Adaptor for overhead doors with counterweights

Additional fastening brackets kit

SBLO 01

BAT 12K

External unlocking system (to be applied on handle lock)

Batteries kit 24V (2 x 12V - 1,2Ah) with battery charge card

Star GDO 100 Spare control unit for Rolls with radio receiver 433,92 MHz

Code Description

LONG 01 Side element for fixing swinging arm ARC 01 to door

BRILLIANT DESIGN The rotating opening of the central cover makes easy the access to the control board. The electronic unit has a plastic cover with simple buttons, It allows an easy and intuitive use. The location of the buffer batteries is in the backside of the base, It’s strong and invisible.

Irreversible gear motor for sectional door up to 17 m and overhead door up to 14 m

HIGH PERFORMANCEThe resistant materials and the mechanic transmission ensure high performance also with big size doors. Mek has been designed to move door until 8 m or until 14 m by installing 2 gear motors.

DESIGN E COMFORTThe design explains the power of the motor-gear. The lamp is very confortable for lighting up the room while the release lever allow a quick manual opening.

CONTROLLED POWERMek has an evolved built-in control unit, it is very easy to programme with the self-learning system and the movement of the door is soft and safe thanks to the innovative control of speed and power.

Mek 230

Description

VERSIONS AVAILABLE

Irreversible reduction gear, 230 Vac with elettronics, electromechanical limit switch,radio receiver 433,920 MHz and motor support braket L= 1500 mm

Mek 230 SE Irreversible reduction gear, 230 Vac motor support braket L= 1500 mm

MBU 10

Power supply

Motor power supply

Input current

Condenser

Overload cut-out

Insulation class

Torque

Lubrication

Work cycle

(Vac 50Hz)

Dimension

Automation weight

Limit switch

-20 ÷ +55

Permanent grease

620x180x115

Electro-mechanical

230 Vac

TECHNICAL DATA Mek 230

Code Description

ACCESSORIES FOR MEK

MCAR 100 Kit bracket with 2 1500mm long connecting-shafts complete with supports + 2 straight telescopic arms

MCAR 200 Kit bracket with 2 1500mm long connecting-shafts complete with supports + 2 curved telescopic arms

MBU 10 Bush

MB 100 Pair of straight telescopic arms with accessories

MB 200 Pair of curved telescopic arms with accessories

MA L Pair of connecting-shafts with bush and lateral installation accessories

MA 1500 Pair of connecting-shafts L=1500mm

MSA Support for connecting-shaft

SBLO 10 External release system

SBLO 11 External release system with key

Star Mek 100 Centrale di ricambio per Mek 230 con ricevitore radio 433,92 MHz e trasformatore

AUTOMATION FOR OVERHEAD DOORS

MEKIrreversible reduction gear for spring or counterweight overhead door up to 8m and up to 14 m with 2 motorgears

SELC 12 Card for electric lock control and courtesy light

MB 100 MB 200 MAMSA

HIGH PERFORMANCEThe resistant materials and the mechanic transmission ensure high performance also with big size doors. Mek has been designed to move door until 8 m or until 14 m by installing 2 gear motors.

DESIGN E COMFORTThe design explains the power of the motor-gear. The lamp is very confortable for lighting up the room while the release lever allow a quick manual opening.

CONTROLLED POWERMek has an evolved built-in control unit, it is very easy to programme with the self-learning system and the movement of the door is soft and safe thanks to the innovative control of speed and power.

Mek 230

Description

VERSIONS AVAILABLE

Irreversible reduction gear, 230 Vac with elettronics, electromechanical limit switch,radio receiver 433,920 MHz and motor support braket L= 1500 mm

Mek 230 SE Irreversible reduction gear, 230 Vac motor support braket L= 1500 mm

MBU 10

Power supply

Motor power supply

Input current

Condenser

Overload cut-out

Insulation class

Torque

Lubrication

Work cycle

(Vac 50Hz)

Dimension

Automation weight

Limit switch

-20 ÷ +55

Permanent grease

620x180x115

Electro-mechanical

230 Vac

TECHNICAL DATA Mek 230

Code Description

ACCESSORIES FOR MEK

MCAR 100 Kit bracket with 2 1500mm long connecting-shafts complete with supports + 2 straight telescopic arms

MCAR 200 Kit bracket with 2 1500mm long connecting-shafts complete with supports + 2 curved telescopic arms

MBU 10 Bush

MB 100 Pair of straight telescopic arms with accessories

MB 200 Pair of curved telescopic arms with accessories

MA L Pair of connecting-shafts with bush and lateral installation accessories

MSA Support for connecting-shaft

SBLO 10 External release system

SBLO 11 External release system with key

Star Mek 100 Centrale di ricambio per Mek 230 con ricevitore radio 433,92 MHz e trasformatore

MEKIrreversible reduction gear for spring or counterweight overhead door up to 8m and up to 14 m with 2 motorgears

MB 100 MB 200 MAMSA

RAPID INSTALLATIONRing is the reduction gear for roll-up shutters that's reliable and easy to install. Designed to be installed directly on the axle, on pre-existing or newly-placed shutters.

SAFETY AND COMFORTThe irreversible movement is ensured by means of an electro-brake. If there is a power outage, the handle release allows perfect reversibility and easy manual operation.

(Vac 50Hz)

(m/min)

-20 ÷ +55

Electromechanical

(Nm) 125

TECHNICAL DATA Ring 150

(mm) 250x250x215

AVAILABLE VERSIONS

EF 100Blindo 11

Electro-brake kit compete with cable and release knob.

Box in aluminium with release lever for electro-brake and push button panel built-in Key access Blindo 22

BB 100

Box in aluminium with release lever for electro-brake. Key access

Base in ABS for fastening Blindo

RI 6042

Axis reduction Ø 60/42

RING 150 Max traction force 150 kg, Ø shaft 60mm, crown 200 mm with shaft reduction Ø 60/48 inclusive.

RING 150 Plus Max traction force 150 kg, Ø shaft 60mm, crown 200 mm with shaft reduction Ø 60/48 inclusive. With electro-brake.

ELECTRONICS FOR SHUTTERS

Star B 11Star B PLUS

Control unit for rolling shutters, basic versionControl unit for rolling shutters with built-in receiver at 433.920 MHz for 50 users, photocell input and adjustment of standby and working times

The control unit “Star B Plus” requires flashing lamps with intermittence “Idea 230 CL”

Code Description

ACCESSORIES FOR RING

Code Description

Power supply

Motor power supply

Motor power

Input current

Condenser

Overload cut-out

Level of protection

Limit switch

Work cycle

Shutter dimensions

Automation weight

Maximum lifting

Torque

Automation dimension

AUTOMATION FOR BALANCE ROLLING SHUTTERS

RINGElectromechanical reduction gear with or without electro-brake - Max. lifting capacity of 150 kg

RAPID INSTALLATIONRing is the reduction gear for roll-up shutters that's reliable and easy to install. Designed to be installed directly on the axle, on pre-existing or newly-placed shutters.

SAFETY AND COMFORTThe irreversible movement is ensured by means of an electro-brake. If there is a power outage, the handle release allows perfect reversibility and easy manual operation.

(Vac 50Hz)

(m/min)

-20 ÷ +55

Electromechanical

(Nm) 125

TECHNICAL DATA Ring 150

(mm) 250x250x215

AVAILABLE VERSIONS

EF 100Blindo 11

Electro-brake kit compete with cable and release knob.

Box in aluminium with release lever for electro-brake and push button panel built-in Key access Blindo 22

BB 100

Box in aluminium with release lever for electro-brake. Key access

Base in ABS for fastening Blindo

RI 6042

Axis reduction Ø 60/42

RING 150 Max traction force 150 kg, Ø shaft 60mm, crown 200 mm with shaft reduction Ø 60/48 inclusive.

RING 150 Plus Max traction force 150 kg, Ø shaft 60mm, crown 200 mm with shaft reduction Ø 60/48 inclusive. With electro-brake.

ELECTRONICS FOR SHUTTERS

Star B 11Star B PLUS

Control unit for rolling shutters, basic versionControl unit for rolling shutters with built-in receiver at 433.920 MHz for 50 users, photocell input and adjustment of standby and working times

The control unit “Star B Plus” requires flashing lamps with intermittence “Idea 230 CL”

Code Description

ACCESSORIES FOR RING

Code Description

Power supply

Motor power supply

Motor power

Input current

Condenser

Overload cut-out

Level of protection

Limit switch

Work cycle

Shutter dimensions

Automation weight

Maximum lifting

Torque

Automation dimension

AUTOMATION FOR BALANCE ROLLING SHUTTERS

RINGElectromechanical reduction gear with or without electro-brake - Max. lifting capacity of 150 kg

HIGH PERFORMANCEThe Open automatic barrier is an automation with 24V motor designed for intensive use. The power of the reduction gear and the stability of the structure ensure perfect management of high-intensity passages. The mechanical structure of Open is made in cataphoresis painted sheet metal; this special technology guarantees very high resistance to atmospheric agents allowing installation evenin maritime zones.

SIMPLE INSTALLATIONChanging the opening direction of the rod is quick and easy by just moving the spring attachment point. The rod is balanced through the adjustable spring while the reduction gear with permanent lubrication is equipped with electric opening and closing limit switches. Manual opening occurs through the personalized lock located outside the structure.

COMPLETE ELECTRONICSThe control unit is separate from the mechanical part and located in the compartment above the barrier to make its installation more convenient.Quick and easy to program by means of the display, optical encoder and electromechanical limit switch, the Star OP24B control unit has a control system with deceleration at the end of travel and obstruction control compliant with EN 12453 regulations.

AVAILABLE VERSIONS

Open 424 Actuator for rods up to 4m, adjustable opening time from 2 to 8 seconds. Irreversible reduction gear 24 Vdc.Built-in control unit and double-channel radio receiver at 433.920 MHz

STROKES AND ACCESSORIES

AS 4B Painted white aluminium stroke with rubber profile Length 4 metres

AS 4L2 Painted white aluminium stroke with rubber profile and LED on both sides. Length 4 metres

BAO 200 Anchor base

APA 200 Movable support to be fixed on the rod

Code Description

APF 200 Adjustable fixed support

Star OP 24B Spare control unit for Open 24 Vdc

RX2 MOL Plug-in double-channel receiver for Star OP 24B

Power supply 230

Motor power 120

Input current 5

Torque -

Permanent greaseLubrification

Electromechanics + EncoderLimit switch

Open time

296x196x1150

Work cycle

(Vac 50Hz)

Level of protection IP54

Dimension

automation weight

Max stroke length

TECHNICAL DATA Open 424

BARRIER AUTOMATION

OPENIrreversible electromechanical reduction gear for barriers with rod up to 4 metres, motor 24 Vdc

BAT KOP Battery charge card

Super 100 Support bracket for photocell Viky11

HIGH PERFORMANCEThe Open automatic barrier is an automation with 24V motor designed for intensive use. The power of the reduction gear and the stability of the structure ensure perfect management of high-intensity passages. The mechanical structure of Open is made in cataphoresis painted sheet metal; this special technology guarantees very high resistance to atmospheric agents allowing installation evenin maritime zones.

SIMPLE INSTALLATIONChanging the opening direction of the rod is quick and easy by just moving the spring attachment point. The rod is balanced through the adjustable spring while the reduction gear with permanent lubrication is equipped with electric opening and closing limit switches. Manual opening occurs through the personalized lock located outside the structure.

COMPLETE ELECTRONICSThe control unit is separate from the mechanical part and located in the compartment above the barrier to make its installation more convenient.Quick and easy to program by means of the display, optical encoder and electromechanical limit switch, the Star OP24B control unit has a control system with deceleration at the end of travel and obstruction control compliant with EN 12453 regulations.

AVAILABLE VERSIONS

Open 424 Actuator for rods up to 4m, adjustable opening time from 2 to 8 seconds. Irreversible reduction gear 24 Vdc.Built-in control unit and double-channel radio receiver at 433.920 MHz

STROKES AND ACCESSORIES

AS 4B Painted white aluminium stroke with rubber profile Length 4 metres

AS 4L2 Painted white aluminium stroke with rubber profile and LED on both sides. Length 4 metres

BAO 200 Anchor base

APA 200 Movable support to be fixed on the rod

Code Description

APF 200 Adjustable fixed support

Star OP 24B Spare control unit for Open 24 Vdc

RX2 MOL Plug-in double-channel receiver for Star OP 24B

Power supply 230

Motor power 120

Input current 5

Torque -

Permanent greaseLubrification

Electromechanics + EncoderLimit switch

Open time

296x196x1150

Work cycle

(Vac 50Hz)

Level of protection IP54

Dimension

automation weight

Max stroke length

TECHNICAL DATA Open 424

BARRIER AUTOMATION

OPENIrreversible electromechanical reduction gear for barriers with rod up to 4 metres, motor 24 Vdc

BAT KOP Battery charge card

Super 100 Support bracket for photocell Viky11

Solutions

OK-KIT KitAutomatic Gate

www.king-gates.com

COMPLETE SET FOR GARAGE DOORS AND ROLLING SHUTTERS

KIT 230Vac and 24Vdc automation with safety, control and signal accessories

OK-KIT

Mekit 230Mekit 230 EVMekit 230 LTE

Code Motor230 Vac

Keyselector

Kit bracketsMCAR 100

Flashing lamp with built-in antenna

Bracket forflashing lamp

2-channel radio remote

Signboard

Externalphotocell

2Kit for spring or counterweight overhead door up to 8m

AUTOMATION FOR BALANCE ROLLING SHUTTERSOK-KIT

Ring Kit 150Ring Kit 150 LTRing Kit 150 PLUS

150 Kg150 Kg150 Kg

Code Motor230 Vac

Electro-brakeControl unitStar B PLUS

Signboard

Maximum lifting

Kit for rolling shutters - Max. lifting capacity of 150 kg

Ring Kit

Note: the Kit does not include the guide

Automatic Gatewww.king-gates.com

650 N650 N1200N

Rolls Kit 650Rolls Kit 650/CARolls Kit 1200/CA

Code Motor24 Vdc

Keyselector

Bracket for flashing lamp

Sign board

Max. thrust

Externalphotocell

AUTOMATION FOR SECTIONAL DOORS

Rolls Kit OK-KIT

2Kit for sectioned doors up to 17m

Solutions

OK-KIT KitAutomatic Gate

www.king-gates.com

COMPLETE SET FOR GARAGE DOORS AND ROLLING SHUTTERS

KIT 230Vac and 24Vdc automation with safety, control and signal accessories

OK-KIT

Mekit 230Mekit 230 EVMekit 230 LTE

Code Motor230 Vac

Keyselector

Kit bracketsMCAR 100

Signboard

Externalphotocell

2Kit for spring or counterweight overhead door up to 8m

AUTOMATION FOR BALANCE ROLLING SHUTTERSOK-KIT

Ring Kit 150Ring Kit 150 LTRing Kit 150 PLUS

150 Kg150 Kg150 Kg

Code Motor230 Vac

Electro-brakeControl unitStar B PLUS

Signboard

Maximum lifting

Kit for rolling shutters - Max. lifting capacity of 150 kg

Ring Kit

Note: the Kit does not include the guide

650 N650 N1200N

Rolls Kit 650Rolls Kit 650/CARolls Kit 1200/CA

Code Motor24 Vdc

Keyselector

Bracket for flashing lamp

Sign board

Max. thrust

Externalphotocell

AUTOMATION FOR SECTIONAL DOORS

Rolls Kit OK-KIT

2Kit for sectioned doors up to 17m

COMPLETE KITS FOR SLIDING AND SWING GATES

KIT 230Vac and 24Vdc automations with safety, control and signal accessories

2 Motors and 2 box in galvanizedsteel

The 230 Vac version includes one SuperIntro 230 package (1° motor with a cable 2,5 m long and the 2° motor with a cable 2,5 m long)

Intro Kit 230Intro Kit 230 LTIntro Kit 24Intro Kit 24 LT

2,5m - 400 Kg2,5m - 400 Kg2,5m - 400 Kg2,5m - 400 Kg

AUTOMATION FOR SWING GATES

Linear KitKit for swinging gates. 230Vac. External installation

Intro KitKit for swing gates. 230Vac e 24Vdc. Underground installation

AUTOMATION FOR SLIDING GATES

Kit for sliding gates. 230 Vac e 24 Vdc.

Jet KitKit for swing gates. 230Vac e 24Vdc. External installation

Dy Kit 230/500Dy Kit 230/500 LTDy Kit 24/350Dy Kit 24/350 LTDy Kit 24/600Dy Kit 24/600 LT

500 Kg500 Kg350 Kg350 Kg600 Kg600 Kg

Motor230 VacCode Motor

24 VdcKey

selectorFlashing lamp with antenna

Sign board

Max.weight

Externalphotocell

Note: Dy Kit 24/350 and 24/350 LT include 1 Dynamos 24/350 with simplified electronics

2 Motors

2 Motors: 1 Left + 1 Right

Jet Kit 230Jet Kit 230 LTJet Kit 24Jet Kit 24 LT

3m - 600 Kg3m - 600 Kg3m - 600 Kg3m - 600 Kg

Controlunit

2 Motors230 VacCode 2 Motors

24 VdcKey

selectorFlashing lampwith antenna

Sign board

Externalphotocell

Linear Kit 300Linear Kit 300 LT

2,5m - 300 Kg2,5m - 300 Kg

Controlunit

2 Motor230 VacCode Key

Sign board

Externalphotocell

Controlunit

2 box in galvanized

steel Max. leaf dimensions

24 VdcKey

Sign board

Externalphotocell

Dynamos Kit OK-KIT

OK-KIT

COMPLETE KITS FOR SLIDING AND SWING GATES

KIT 230Vac and 24Vdc automations with safety, control and signal accessories

2 Motors and 2 box in galvanizedsteel

The 230 Vac version includes one SuperIntro 230 package (1° motor with a cable 2,5 m long and the 2° motor with a cable 2,5 m long)

Intro Kit 230Intro Kit 230 LTIntro Kit 24Intro Kit 24 LT

2,5m - 400 Kg2,5m - 400 Kg2,5m - 400 Kg2,5m - 400 Kg

Linear KitKit for swinging gates. 230Vac. External installation

Intro KitKit for swing gates. 230Vac e 24Vdc. Underground installation

AUTOMATION FOR SLIDING GATES

Kit for sliding gates. 230 Vac e 24 Vdc.

Jet KitKit for swing gates. 230Vac e 24Vdc. External installation

Dy Kit 230/500Dy Kit 230/500 LTDy Kit 24/350Dy Kit 24/350 LTDy Kit 24/600Dy Kit 24/600 LT

500 Kg500 Kg350 Kg350 Kg600 Kg600 Kg

Motor230 VacCode Motor

24 VdcKey

selectorFlashing lamp with antenna

Sign board

Max.weight

Externalphotocell

Note: Dy Kit 24/350 and 24/350 LT include 1 Dynamos 24/350 with simplified electronics

2 Motors

2 Motors: 1 Left + 1 Right

Jet Kit 230Jet Kit 230 LTJet Kit 24Jet Kit 24 LT

3m - 600 Kg3m - 600 Kg3m - 600 Kg3m - 600 Kg

Controlunit

24 VdcKey

Sign board

Externalphotocell

Linear Kit 300Linear Kit 300 LT

2,5m - 300 Kg2,5m - 300 Kg

Controlunit

2 Motor230 VacCode Key

Sign board

Externalphotocell

Controlunit

2 box in galvanized

steel Max. leaf dimensions

24 VdcKey

Sign board

Externalphotocell

Dynamos Kit OK-KIT

OK-KIT

ELECTRONIC CONTROL UNITS

STARControl units 230 Vac and 24 Vdc self-learning for 1 or 2 motors

CONTROL UNITS FOR 1 OR 2 MOTORS

Code Description

STAR 230-S Control unit for 1 or 2 motors 230 Vac, built-in receiver 433.920 MHz (CARD ONLY)

STAR 230-BOX Control unit for 1 or 2 motors 230 Vac in "ELBOX" plastic box, built-in transformer 40VA and receiver 433.920 MHz

STAR is the advanced series of electronic control units dedicatedto the control of 230 Vac and 24 Vdc motors.

Quick and easy programming thanks to innovative self-learning procedure

Simple and practical fine tuning of main parameters with trimmer

Precise, fluid movements with deceleration devices

Spacious box with elegant design, resistant to atmospheric agents.

ElboxElbox 22

ACCESSORIES FOR STAR 24 Vdc

ELBOX 22

Description

ABS container

BAT 21 Battery kit with plastic box and battery charge card

BAT K Battery charge card

Description

ABS container

STAR 24-S Control unit for 1 or 2 motors 24 Vdc, built-in receiver 433.920 MHz (CARD ONLY)

STAR 24-BOX Control unit for 1 or 2 motors 24 Vdc in "ELBOX22" plastic box, built-in transformer 150VA and receiver 433.920 MHz

Use with Jet, Linear and Intro automation.

CONTROL UNITS FOR 1 MOTOR 230 VAC OR 24 VDC

Code Description

STAR D100 Control unit for 1 motor 230 Vac, built-in receiver 433.920 MHz (CARD ONLY)Use with Dynamos 500 automation.

STAR D400 Control unit for 1 motor 24 Vdc, built-in receiver 433.920 MHz (CARD ONLY)Use with Dynamos 24/350 EV and Dynamos 24/600 automations.

STAR D500 Control unit for 1 motor 24 Vdc, built-in receiver 433.920 MHz (CARD ONLY)Use with Dynamos 24/350 automations.

STAR GDO 100 Control unit for 1 motor 24 Vdc, built-in receiver 433.920 MHz (CARD ONLY)Use with Rolls 650 and Rolls 1200 automations.

STAR MEK100 Control unit for 1 motor 24 Vdc, built-in receiver 433.920 MHz (CARD ONLY)Use with Mek 230 automations.

STAR B PLUS Control unit for 1 or 2 motors 230 Vac in plastic box, built-in transformer and receiver 433.920 MHzUse with Ring 150 automations.

ADJUSTMENTS

Force / SpeedStandby timeObstacle sensitivityGate delay

StarD 100

StarD 400

StarD 500

Star230

Star24

StarGDO

StarMEK

Star BPLUS

CHARACTERISTICS StarD 100

StarD 400

StarD 500

Star230

Star24

StarGDO

StarMEK

Star BPLUS

INPUT / OUTPUT StarD 100

StarD 400

StarD 500

Star230

Star24

StarGDO

StarMEK

Star BPLUS

Motor 1 output Motor 2 output Flashing 230Vac output Flasher 24Vdc output Flasher 12Vdc output Electric lock output Gate open LED 12Vdc output Gate open LED 24Vdc output Channel controlled by the radio transmitter output Courtesy light 230Vac output Courtesy light 24Vdc output Antenna output 230Vac - Power supply input 24Vdc - Power supply input Stop input Pedestrian open input Open input Opening / closing limit switch motor 1 input Opening / closing limit switch motor 2 input Backup batteries input Photocells input Pneumatic or mechnical edge input Safety in opening input

OPEN/PAUSE/CLOSE ModeSTEP by STEP modeDead man’s switch modeAutomatic closingEncoder Handling Pedestrian openingRapid re-closingDeceleration in openingDeceleration in closingSafety testGate spyLock strokeFlashing light fixed / flashingBuilt-in radio receiverThe "gradual "soft start"Safety in closingSafety in openingBuilt-in battery charge cardOptional battery charge cardBuilt-in transformerBuilt-in antennaExtractable terminal block

ELECTRONIC CONTROL UNITS

STARControl units 230 Vac and 24 Vdc self-learning for 1 or 2 motors

CONTROL UNITS FOR 1 OR 2 MOTORS

Code Description

STAR 230-S Control unit for 1 or 2 motors 230 Vac, built-in receiver 433.920 MHz (CARD ONLY)

STAR 230-BOX Control unit for 1 or 2 motors 230 Vac in "ELBOX" plastic box, built-in transformer 40VA and receiver 433.920 MHz

STAR is the advanced series of electronic control units dedicatedto the control of 230 Vac and 24 Vdc motors.

Quick and easy programming thanks to innovative self-learning procedure

Simple and practical fine tuning of main parameters with trimmer

Precise, fluid movements with deceleration devices

Spacious box with elegant design, resistant to atmospheric agents.

ElboxElbox 22

ELBOX 22

Description

ABS container

BAT 21 Battery kit with plastic box and battery charge card

BAT K Battery charge card

Description

ABS container

STAR 24-S Control unit for 1 or 2 motors 24 Vdc, built-in receiver 433.920 MHz (CARD ONLY)

STAR 24-BOX Control unit for 1 or 2 motors 24 Vdc in "ELBOX22" plastic box, built-in transformer 150VA and receiver 433.920 MHz

Use with Jet, Linear and Intro automation.

CONTROL UNITS FOR 1 MOTOR 230 VAC OR 24 VDC

Code Description

STAR D100 Control unit for 1 motor 230 Vac, built-in receiver 433.920 MHz (CARD ONLY)Use with Dynamos 500 automation.

STAR D400 Control unit for 1 motor 24 Vdc, built-in receiver 433.920 MHz (CARD ONLY)Use with Dynamos 24/350 EV and Dynamos 24/600 automations.

STAR D500 Control unit for 1 motor 24 Vdc, built-in receiver 433.920 MHz (CARD ONLY)Use with Dynamos 24/350 automations.

STAR GDO 100 Control unit for 1 motor 24 Vdc, built-in receiver 433.920 MHz (CARD ONLY)Use with Rolls 650 and Rolls 1200 automations.

STAR MEK100 Control unit for 1 motor 24 Vdc, built-in receiver 433.920 MHz (CARD ONLY)Use with Mek 230 automations.

STAR B PLUS Control unit for 1 or 2 motors 230 Vac in plastic box, built-in transformer and receiver 433.920 MHzUse with Ring 150 automations.

ADJUSTMENTS

Force / SpeedStandby timeObstacle sensitivityGate delay

StarD 100

StarD 400

StarD 500

Star230

Star24

StarGDO

StarMEK

Star BPLUS

CHARACTERISTICS StarD 100

StarD 400

StarD 500

Star230

Star24

StarGDO

StarMEK

Star BPLUS

INPUT / OUTPUT StarD 100

StarD 400

StarD 500

Star230

Star24

StarGDO

StarMEK

Star BPLUS

Motor 1 output Motor 2 output Flashing 230Vac output Flasher 24Vdc output Flasher 12Vdc output Electric lock output Gate open LED 12Vdc output Gate open LED 24Vdc output Channel controlled by the radio transmitter output Courtesy light 230Vac output Courtesy light 24Vdc output Antenna output 230Vac - Power supply input 24Vdc - Power supply input Stop input Pedestrian open input Open input Opening / closing limit switch motor 1 input Opening / closing limit switch motor 2 input Backup batteries input Photocells input Pneumatic or mechnical edge input Safety in opening input

OPEN/PAUSE/CLOSE ModeSTEP by STEP modeDead man’s switch modeAutomatic closingEncoder Handling Pedestrian openingRapid re-closingDeceleration in openingDeceleration in closingSafety testGate spyLock strokeFlashing light fixed / flashingBuilt-in radio receiverThe "gradual "soft start"Safety in closingSafety in openingBuilt-in battery charge cardOptional battery charge cardBuilt-in transformerBuilt-in antennaExtractable terminal block

Absolutely new: ergonomic dual-curve sides

RADIOTRANSMITTERS 433,920 MHz

Clipper 2

Description

Clipper 4

Radiotransmitter Rolling code - 2 channels

TECHNICAL DATA

Clipper

Code Frequency Range Encoding Power supply Power input Dimensions

433,920 MHz 100 m Rolling code 6Vdc 10 mA 69x35x11

Clipper

ACCESSORIES FOR FRED

VIP mono

Description

Channel module for relay outputs, mono-stable

Channel module for relay outputs, bi-stable

MEMO 200 Extractable memory module for Fred 33, 200 codes

ANT433 e Professional antenna 433,920 Mhz,complete with bracket

MODULAR RECEIVERS 433,920 MHz

Fred 11

Description

Fred 22

Single channel receiver, 50 users

Dual-channel receiver with built-in antenna, plug-in cable, 200 users

Fred 33 4-channel receiver with insertion for MEMO memoryand 4 VIP series insertions (requires memory module MEMO 200)

Fred 11 Fred 22

Fred 33

ANT 433 e

RX STAR Radio module 433,920 MHz

RADIOTRANSMITTER ROLLING CODE

CLIPPERRadio remote control 433.920 MHz with self-learning - 2 and 4 channels

Click IN Click EX Digy eliteDigy radio

SELECTORS

Click IN

Description

Click EX

Recessed key selector, ABS structure

External key selector, ABS structure

Digy radio Digital selector IP 54 - 433,92 MHz with 4 channels selected from keypad, back-lighted

Digy elite Stainless steel anti-vandalism hard-wired digital selector, IP67, 500 users. back-lighted

KEY SELECTOR AND DIGITAL KEYBOARDS

CLICK & DIGYKey selectors, recessed or external - Digital Keyboard via radio or hard-wired

SINGLE-CHANNEL DETECTORS WITH TERMINAL BLOCK

SPIRO B1

Description

Single-channel electromagnetic detectorwith connection terminal block (ONLY CARD)

SPIRO BOX 1 Single-channel electromagnetic detectorwith connection terminal block in an IP56 plastic box

SINGLE AND DOUBLE-CHANNEL DETECTORS WITH UNDECAL CONNECTOR

SPIRO UN1

Description

Single-channel electromagnetic detectorwith undecal connector in an IP44 plastic box

SPIRO UN2 Double-channel electromagnetic detectorwith undecal connector in an IP44 plastic box

LOOP FOR INDUCTIVE DETECTORS

WIRE 6

Description

LOOP for inductive detectors for perimeters of 6 mts

WIRE 10 LOOP for inductive detectors for perimeters of 10 mts

METALLIC MASS DETECTORS

SPIROMagnetic loop detectors for automatic opening control

SPIRO BOX 1

SPIRO UN1/UN2

SPIRO B1

Absolutely new: ergonomic dual-curve sides

RADIOTRANSMITTERS 433,920 MHz

Clipper 2

Description

Clipper 4

TECHNICAL DATA

Clipper

Code Frequency Range Encoding Power supply Power input Dimensions

433,920 MHz 100 m Rolling code 6Vdc 10 mA 69x35x11

Clipper

ACCESSORIES FOR FRED

VIP mono

Description

Channel module for relay outputs, mono-stable

Channel module for relay outputs, bi-stable

MEMO 200 Extractable memory module for Fred 33, 200 codes

ANT433 e Professional antenna 433,920 Mhz,complete with bracket

MODULAR RECEIVERS 433,920 MHz

Fred 11

Description

Fred 22

Single channel receiver, 50 users

Dual-channel receiver with built-in antenna, plug-in cable, 200 users

Fred 33 4-channel receiver with insertion for MEMO memoryand 4 VIP series insertions (requires memory module MEMO 200)

Fred 11 Fred 22

Fred 33

ANT 433 e

RX STAR Radio module 433,920 MHz

RADIOTRANSMITTER ROLLING CODE

CLIPPERRadio remote control 433.920 MHz with self-learning - 2 and 4 channels

Click IN Click EX Digy eliteDigy radio

SELECTORS

Click IN

Description

Click EX

Recessed key selector, ABS structure

External key selector, ABS structure

Digy radio Digital selector IP 54 - 433,92 MHz with 4 channels selected from keypad, back-lighted

Digy elite Stainless steel anti-vandalism hard-wired digital selector, IP67, 500 users. back-lighted

KEY SELECTOR AND DIGITAL KEYBOARDS

CLICK & DIGYKey selectors, recessed or external - Digital Keyboard via radio or hard-wired

SINGLE-CHANNEL DETECTORS WITH TERMINAL BLOCK

SPIRO B1

Description

Single-channel electromagnetic detectorwith connection terminal block (ONLY CARD)

SPIRO BOX 1 Single-channel electromagnetic detectorwith connection terminal block in an IP56 plastic box

SINGLE AND DOUBLE-CHANNEL DETECTORS WITH UNDECAL CONNECTOR

SPIRO UN1

Description

Single-channel electromagnetic detectorwith undecal connector in an IP44 plastic box

SPIRO UN2 Double-channel electromagnetic detectorwith undecal connector in an IP44 plastic box

LOOP FOR INDUCTIVE DETECTORS

WIRE 6

Description

LOOP for inductive detectors for perimeters of 6 mts

WIRE 10 LOOP for inductive detectors for perimeters of 10 mts

METALLIC MASS DETECTORS

SPIROMagnetic loop detectors for automatic opening control

SPIRO BOX 1

SPIRO UN1/UN2

SPIRO B1

Viky Plus

Viky 11

Viky 22

Viky 180Viky B2

COLUMNS FOR PHOTOCELLS

Tower 500

Description

Tower 1000

Column for 1 photocell Viky 11, height 500 mm (pcs./package 2)

Column for 2 photocells Viky 11, height 1000 mm (pcs./package 2)

PTO 01 Foundation bracket (pcs./package 2)

ACCESSORIES

Super 100

Description

Bracket for Viky 11

Protected photocell(Viky 11)

Anodised aluminium,solid and elegant

PHOTOCELLS

Viky 180 is a safety device with 180° orientable lens. Perfect for difficult installation where the insufficent space doesn’t permitthe use of a classical photocells.

Viky B2 is a 180° orientable lens photocell. It has been projected for sliding gates for solving the problem of mobile safety edge.The combination with mechanical edge in the front side of the gates guarantes thesafety level requires by the EN1243 normative.

Viky 11

Description

Viky 22

Pair of external photocells IP45

Pair of recessed photocells IP 44

Viky 180

Viky B2

Pair of 180° rotating photocells IP 45

Pair of 180° rotating photocells IP 45 with batteries

Viky PLUS Pair of external long range photocells, IP45

TECHNICAL DATA

Code Power supply Power input Range Operating temp.

Viky 11 12 ÷ 24 Vac-Vdc 50mA (TX+RX) 30m Standard -20° +55°

Viky 180

Viky B2

12 ÷ 24 Vac-Vdc

12 ÷ 24 Vac-Vdc (RX)

Batteria 3V (TX)

60mA (TX+RX)

35 mA (RX)

25 mA (TX)

25m Standard

20m Standard

-20° +55°

Viky PLUS 12 ÷ 24 Vac-Vdc 50mA (TX+RX) 100m Standard -20° +55°

-20° +55°

PHOTOCELL AND ACCESSORIES

VIKY & TOWERExternal, recessed, 180°orientable, with or without batteries photocells

Mechanical rib

Cable holder

MECHANICAL RIB WITH WATERTIGHT MICRO-SWITCHES

DescriptionCode

MECHANICAL RIB WITH HERMETIC SENSOR

Topbar 1400

Description

Topbar 1800

Mechanical rib, length 1400 mm

Topbar 2000 Mechanical rib, length 2000 mm

Topbar 2500

Controlbar

Control card in compliance with European standard EN 12978

PASSIVE SHOCK ABSORBING SYSTEMS

Passbar 1400

Description

Passbar 1800

Passive shock absorbing system, length 1400 mm

Passbar 2000 Passive shock absorbing system, length 2000 mm

Bar e Controlbar are sensitive mechanical edges applicable to gates and garage doors.

Compliant with European standard En 12978 thanksto the technology of "controlbar" auto-control.

With Bar e Topbar the instant stopping in the event of impact is ensured by the action of watertight micro-switches located inside the system.Passbar is the passive shock absorbing system for cushioning the impact force.

CABLE HOLDER

Movikit 5m

Description

Movikit 7,5m

Complete kit for leaves up to 5 m

Complete kit for leaves up to 7,5 m

Movikit 10m Complete kit for leaves up to 10 m

SIGNALLING ACCESSORIE

Description

Sign board TAB

Movi is the power-cable holder for ribs and edges installed on either vertically or horizontally moving parts. Available in 3 kit versions (up to 5 m, 7.5 m and 10 m), it ensure quick creation of a safe automation.Bar 1400

Bar 1800

Bar 2000 Mechanical rib, length 2000 mm

SAFETY DEVICES FOR GATES AND GARAGE DOORS

SAFETYSYSTEMS

Sensitive mechanical edges applicable to gates and garage doors

Bar/Topbar/Passbar

Viky Plus

Viky 11

Viky 22

Viky 180Viky B2

COLUMNS FOR PHOTOCELLS

Tower 500

Description

Tower 1000

Column for 1 photocell Viky 11, height 500 mm (pcs./package 2)

Column for 2 photocells Viky 11, height 1000 mm (pcs./package 2)

PTO 01 Foundation bracket (pcs./package 2)

ACCESSORIES

Super 100

Description

Bracket for Viky 11

Protected photocell(Viky 11)

Anodised aluminium,solid and elegant

PHOTOCELLS

Viky 180 is a safety device with 180° orientable lens. Perfect for difficult installation where the insufficent space doesn’t permitthe use of a classical photocells.

Viky B2 is a 180° orientable lens photocell. It has been projected for sliding gates for solving the problem of mobile safety edge.The combination with mechanical edge in the front side of the gates guarantes thesafety level requires by the EN1243 normative.

Viky 11

Description

Viky 22

Pair of external photocells IP45

Pair of recessed photocells IP 44

Viky 180

Viky B2

Pair of 180° rotating photocells IP 45

Pair of 180° rotating photocells IP 45 with batteries

Viky PLUS Pair of external long range photocells, IP45

TECHNICAL DATA

Code Power supply Power input Range Operating temp.

Viky 180

Viky B2

12 ÷ 24 Vac-Vdc

12 ÷ 24 Vac-Vdc (RX)

Batteria 3V (TX)

60mA (TX+RX)

35 mA (RX)

25 mA (TX)

25m Standard

20m Standard

-20° +55°

Viky PLUS 12 ÷ 24 Vac-Vdc 50mA (TX+RX) 100m Standard -20° +55°

-20° +55°

PHOTOCELL AND ACCESSORIES

VIKY & TOWERExternal, recessed, 180°orientable, with or without batteries photocells

Mechanical rib

Cable holder

MECHANICAL RIB WITH WATERTIGHT MICRO-SWITCHES

DescriptionCode

MECHANICAL RIB WITH HERMETIC SENSOR

Topbar 1400

Description

Topbar 1800

Topbar 2000 Mechanical rib, length 2000 mm

Topbar 2500

Controlbar

Control card in compliance with European standard EN 12978

PASSIVE SHOCK ABSORBING SYSTEMS

Passbar 1400

Description

Passbar 1800

Bar e Controlbar are sensitive mechanical edges applicable to gates and garage doors.

Compliant with European standard En 12978 thanksto the technology of "controlbar" auto-control.

With Bar e Topbar the instant stopping in the event of impact is ensured by the action of watertight micro-switches located inside the system.Passbar is the passive shock absorbing system for cushioning the impact force.

CABLE HOLDER

Movikit 5m

Description

Movikit 7,5m

Complete kit for leaves up to 5 m

Complete kit for leaves up to 7,5 m

Movikit 10m Complete kit for leaves up to 10 m

SIGNALLING ACCESSORIE

Description

Sign board TAB

Movi is the power-cable holder for ribs and edges installed on either vertically or horizontally moving parts. Available in 3 kit versions (up to 5 m, 7.5 m and 10 m), it ensure quick creation of a safe automation.Bar 1400

Bar 1800

SAFETY DEVICES FOR GATES AND GARAGE DOORS

SAFETYSYSTEMS

Sensitive mechanical edges applicable to gates and garage doors

Bar/Topbar/Passbar

FLASHING LAMPS

Idea 230

Idea 230 Dynamos 230 - Jet 230 - Linear 230 - Intro 230 - Mek 230

Flashing Lamps Automation

Description

Idea 230 PLUS

Flashing lamp 230 Vac 25 W

Flashing lamp 230 Vac 25 W with built-in antenna 433,920 MHz

Idea CL 230

Idea CL 230 PLUS

Flashing lamp 230 Vac with included electronics, lamp 25W

Flashing lamp 230 Vac with included electronics,lamp 25W. Built-in antenna 433,920 MHz

Idea 12

Idea 12 PLUS

Flashing lamp 12 Vdc 3 W

Flashing lamp 12 Vdc 3 W with built-in antenna 433,920 MHz

Idea 24

Idea 24 PLUS

To order “Idea” in white version with yellow lampindicate the abbreviation "WE" after the code. Esempio: Idea 230 PLUS WENot available for the 12 Vdc versions.

Idea 12 Dynamos 24 - Jet 24 - Intro 24

Idea 24 Rolls - Open 24

Idea CL 230 Ring - Star B - Dynamos 230 - Jet 230 - Linear 230 - Intro 230 - Mek 230

Super 100

Bracket for idea

La 230

Description

La 230 WE

Lamp 230 Vac 25 W (2 Pcs./Package)

Lamp 230 Vac 25 W, yellow color (2 Pcs./Package)

La 12 Lamp 230 Vac 3 W (2 Pcs./Package)

La 24 WE Lamp 230 Vac 10 W, yellow color (2 Pcs./Package)

ACCESSORIES

Description

CV Idea Double insulation cable with shielding for flasher connection. Power supply cable + RG58. Length 100m.

FLASHING LAMPS WITH BUILT-IN ANTENNA

IDEAFlashing lamps with lamp 230 Vac, 24 Vdc and 12 Vdc with shell in impact-resistant polycarbonate

FLASHING LAMP-AUTOMATION

Idea WE

CV Idea

FLASHING LAMPS

Idea 230

Idea 230 Dynamos 230 - Jet 230 - Linear 230 - Intro 230 - Mek 230

Flashing Lamps Automation

Description

Idea 230 PLUS

Flashing lamp 230 Vac 25 W

Flashing lamp 230 Vac 25 W with built-in antenna 433,920 MHz

Idea CL 230

Idea CL 230 PLUS

Flashing lamp 230 Vac with included electronics, lamp 25W

Flashing lamp 230 Vac with included electronics,lamp 25W. Built-in antenna 433,920 MHz

Idea 12

Idea 12 PLUS

Idea 24

Idea 24 PLUS

To order “Idea” in white version with yellow lampindicate the abbreviation "WE" after the code. Esempio: Idea 230 PLUS WENot available for the 12 Vdc versions.

Idea 12 Dynamos 24 - Jet 24 - Intro 24

Idea 24 Rolls - Open 24

Idea CL 230 Ring - Star B - Dynamos 230 - Jet 230 - Linear 230 - Intro 230 - Mek 230

Super 100

Bracket for idea

La 230

Description

La 230 WE

Lamp 230 Vac 25 W (2 Pcs./Package)

Lamp 230 Vac 25 W, yellow color (2 Pcs./Package)

La 24 WE Lamp 230 Vac 10 W, yellow color (2 Pcs./Package)

ACCESSORIES

Description

CV Idea Double insulation cable with shielding for flasher connection. Power supply cable + RG58. Length 100m.

FLASHING LAMPS WITH BUILT-IN ANTENNA

IDEAFlashing lamps with lamp 230 Vac, 24 Vdc and 12 Vdc with shell in impact-resistant polycarbonate

FLASHING LAMP-AUTOMATION

Idea WE

CV Idea

Gates and doors automationCatalogue and price list07/2007

lli, M

KING gatesVia A. Malignani, 42 - 33077 Sacile (PN) ITALY

Ph. +39 0434 737082 - Fax +39 0434 783382

e-mail: [email protected] web: www.king-gates.com

Technical partner DIEGM Robotics - University of Udine Products - made in Italy

gates and doors automation - folim · rolling shutters. 14 barrier automation. 16 electronics and...

Documents