gather co - surface specification - lobo longs · speciﬁcation detail - lobo longs. 1800 428 437...

Surface SpecificationLobo Longs

GATHERCO.COM.AU - 1800 428 437

Specification Detail - Lobo Longs. 1800 428 437 | www.gatherco.com.au | 2

3 INTRODUCTION A full description of the

Lobo Long format.

4 HERO IMAGERY

A single hero shot of each variety available.

5 IN-SITUE IMAGERY Project imagery of our Lobo

Longs.

8 SIZING

A detailed breakdown of sizes, weights & packaging

volumes.

9 INSTALLATION

Direction on compatible installation products.

Toc. Table of Contents

7 FORMAT

Swatch imagery of each shape within the collection.

13 CONTACT

Contact details for further information.

6 MATERIAL FINISH

Detail on each finish, texture composition and

slip rating.

http://www.gatherco.com.au


Lobo Longs.

Cobblestones Reimagined Versatile and unique - this exclusive collection of hybrid cobbles demands attention. With proven durability, Lobo Longs have been specifically engineered to furnish busy entertainment areas, high traffic foot paths and driveways. Its narrow linear profile also works well when applied to sweeping curves & broad contours.

Completed installations are characterised by the highly irregular edges of each piece, which unite to present a uniquely organic grout detail. Available in either split or sawn faced options, relatively consistent heights mean this robust format can be both wet bed installed or, directly glued to a concrete substrate.

Lobo Longs Explained Linear by design and offered only in granite, Gather Co's Lobo Longs collection is a flexible format, intended for significant loads. With a sawn reverse side, this format is engineered to support maximum efficiency during installation. The exposed face can be either split, or for a more consistent finish- sawn.

LL.B a n k s C o o k D i a s



H e r o I m a g e r y

C O O K S p l i t G r a n i t e

D I A S S p l i t G r a n i t e

B A N K S S p l i t G r a n i t e

C O O K S a w n G r a n i t e

D I A S S a w n G r a n i t e

B A N K S S a w n G r a n i t e

Me.Managing Expectations.

Product Variation Variation has been carefully considered when producing our surface collections. Colour, tone, composition, and texture are all naturally occurring characteristics of stone and will always differ from piece to piece.

Variation may also result in significant inconsistencies when delivered product is compared to any samples presented. That said, variation is in no way considered a material defect. It’s precisely what makes stone so uniquely beautiful.

Please be sure to seriously consider these inherent characteristics whenever assessing the suitability of any Gather Co surface.



I n - s i t u I m a g e r y

P r o j e c t

Dangar Barin Smith COOK - Lobo Longs - Split & Tumbled.



M a t e r i a l | F i n i s h

Qc.

B A N K S S p l i t & T u m b l e d

E x p o s e d F a c e

S l i p R a t i n g : N / A T e x t u r e G u i d e : 4

C O O K S p l i t & T u m b l e d



D I A S S p l i t & T u m b l e d



Quarry Cut.

Down to the Details A full appreciation for the installed aesthetic of our surface collections only comes with understanding each material in its raw form. Every piece has been carefully prepared to support efficiency during installation and authenticity upon completion. This considered process ensures distinctive outcomes are achieved with each unique project.

B A N K S S a w n & T u m b l e d



C O O K S a w n & T u m b l e d



D I A S S a w n & T u m b l e d



G r a n i t e

NOTE: The configuration of this format means that standard slip testing techniques cannot be accurately undertaken. That being

said, once installed, the overall surface is typically uneven resulting in relatively positive slip resistance.



L o b o L o n g s

F o r m a t

In addition to imagery, you can

a l s o a c c e s s a s e r i e s o f

architectural files including:

DWG, SKM and seamless texture

images. They’re all available via

the “Design File” tab on each

product profile. Simply visit:

g a t h e r c o . c o m . a u

It's important to note there can be significant variation in colour, texture and tone across each finish. The above

swatches are intended as general indicators only. Gather Co has no control over the natural variation that occurs

across blocks extricated from developing quarry sites. This unavoidable fact must be accounted for when specifying

and variety within our Slate collection.

B A N K S S p l i t

D I A S S p l i t

C O O K S p l i t

B A N K S S a w n

C O O K S a w n

D I A S S a w n



It’s important to note that the these values are approximates only. Being a natural product, weights, sizes and crate

volumes will vary. Detail on installation procedures can be obtained through our downloadable “Tips for Installation”

document. For any further assistance, simply visit our website:

gatherco.com.au or call on: 1800 428 437

FlooringProduct Material Finish Edge &

ReverseThickness

(mm)Dimensions

(Length x Width - mm)

Slip Rating

Weight (kg/m2)

Pack Volumes (m2/crate)

B A N K S

GraniteSplit &

tumbled exposed face.

Split & tumbled

edges. Saw

reverse.

40 - 50

Random lengths

between 150 & 400mm. Random widths

between 30 & 60mm.

N/A 150 12C O O K

D I A S

B A N K S

GraniteSawn &

tumbled exposed face.

Split & tumbled

edges. Saw

reverse.

30

Random lengths

between 150 & 400mm. Random widths

between 30 & 60mm.

N/A 80 12C O O K

D I A S

Additional Formats

Product Also available in:

B A N K S Stone Bricks. Cobblestones - Full Format. Cobblestones - Thin Format.

C O O K Pavers & Tiles. Coping. Stone Bricks. Cobblestones - Full Format. Cobblestones - Thin Format.

D I A S Stone Bricks. Cobblestones - Full Format. Cobblestones - Thin Format.

L o b o L o n g s

S i z i n g

DP.&

Dimensions & Packaging.

Know All the Details The following data has been prepared to give you clear indications on sizing, weights and pack volumes. These details will arm you with the critical information required to detail design allowances for a seamless construction process.

Due to the organic nature of our collections, all values are approximates only.

Lo

bo

L

on

gs

http://gatherco.com.au

http://gatherco.com.au



Sa.&

P r o B l o c k S e a l e r s C h o i c e G o l d H y d r o B a n L a t i p o x y 2 5 4 P l a t i n u m 3 3 5 P r e m i u m F l e x i b l e A d h e s i v e 3 3 5 R a p i d P r e m i u m F l e x i b l e A d h e s i v e M V I S V a n e e r M o r t a r P e r m a C o l o u r G r o u t

Sealers & Adhesives.

Correct Installation Is Key All our information has been prepared to give you concise direction on installation products compatible with our various surface collections. Quantities stated below are approximates only, intended to assist in the quantification of product for ordering. Actual requirements will vary depending on the substrate, site conditions and method of application.

Please contact us directly should you require any further assistance.



Subject Material CoverageSealers (Per a Litre.)

AquaMix Sealers Choice Gold: Granite 10-14m2 Limestone 6-10m2

Quarts 6-10m2 Basalt 8-12m2 Sandstone 6-10m2 Slate 10-14m2

ProBlock: Granite 10-14m2

(Based on the prescribed ‘Dip-Seal’ method.) Quarts 6-10m2 Limestone 6-10m2 Basalt 8-12m2 Sandstone 6-10m2 Slate 10-14m2

I n s t a l l a t i o n

Unit Size CoverageWaterproofing (Per a Pail.)

Laticrete HydroBan: 15L (Pail.) 18m2

(Two coats required.)

Latipoxy: 10L (Pail x 2.) 30m2 (Only one combination coat of part A & part B is required.)

Approximates only

Approximates only

Unit Size CoverageAdhesives (Per a Bag.)

Laticrete

335 Premium Flexible Adhesive: 20kg (Bag.) 7 - 8m2

(Based on a 6x6mm square notched trowel.)

335 Rapid Premium Flexible Adhesive: 20kg (Bag.) 7 - 8m2


254 Platinum: 20kg (Bag.) 7.5 - 8.5m2


MVIS Veneer Mortar: 20kg (Bag.) 7.5 - 6.2m2


Approximates only



COOK- Granite Lobo Longs - Sawn & Tumbled

I n s t a l l a t i o n

Unit Size CoverageGrout (Per a Bag.)

Laticrete PermaColor Grout : 10kg (Bag.) Variable

(Coverage is dependant on the intended grout joint allowance.)

Approximates only

Gather Co is an authorised reseller of both Aquamix and Laticrete products in Australia. We do not manufacture, import or extend warranties to their product. Advice offered is intended to aid in the correct and safe application of

these products. Should you require any further information, we suggest downloading the corresponding product resources and or contacting the manufacturer directly:

Aquamix: 1300 278 264 / [email protected] | Laticrete: 1800 331 012 / [email protected]

Parts Wet Bed Adhesion Method

Slurry Comoposition

Blended Coarse Washed Sand 3

(As per Australian Standards.)

Grey Portland Cement: 1

(Type GP cement.)

Clean Water 1

(Additional water may be added to achieve desired consistency.)

Note: A bonding agent such as Laticrete EVERBOND may be used to further improve adhesion, strength and workability.

Approximates only

mailto:[email protected]


mailto:[email protected]


Although the information in this documentation is presented in good faith and believed to be correct at the time of creation, Gather Co makes no representations or warranties as to the completeness or accuracy of the information. Gather Co has no liability for any errors or omissions in the materials. Gather Co and the manufacturers represented herein, reserve the right to change, delete, or otherwise modify the information which is represented without any prior notice. Persons receiving this information will make their own determination as to its suitability for their own purposes prior to use. In no event will Gather Co be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information from this document or the products to which the information refers. All values are best approximations. No part of this document may be reproduced or distributed without the expressed written permission of Gather Co.

GATHERCO.COM.AU - 1800 428 437


gather co - surface specification - lobo longs · speciﬁcation detail - lobo longs. 1800 428 437...

Documents