general information · bradford white’s hydrojettotal performance systemgives the plumbing trade...
TRANSCRIPT
General Information1. All Gas Water Heaters are design certified by CSA International (formerly AGA and CGA) in accordance with ANSI Z21.10.1 or 10.3 (latest
addition). Closed Combustion Manufactured Home Water Heaters, are listed by Underwriters Laboratories.
2. All Electric Water Heaters are listed by Underwriters Laboratories.
3. All Residential Storage Models meet or exceed efficiency requirements of the Department of Energy. ASHRAE standard 90.1b (currentstandard) and the National Appliance Energy Conservation Act of 1987, recent amendment effective January 20, 2004 which supercedes allstate and local efficiency requirements.
4. All Tank Type Water Heaters are certified at 300 PSI test pressure and 150 PSI working pressure (except where noted).
5. All Residential and Light Duty Water Connections are 3⁄4" NPT on 8" centers (except where noted).
6. All Residential and Light Duty Gas Models have 1⁄2" NPT Gas Connections (except where noted).
7. All Residential Water Heaters come with a T&P Relief Valve included (except where noted).
8. MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117;6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031;5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043;1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
9. Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
CSAInternational
UnderwritersLaboratories
NationalSanitationFoundation
American Society of MechanicalEngineers
National Board ofBoiler and PressureVessel Inspectors
HydronicsInstitute
Total Performance.
High Efficiency, High Deliverability, Highly Effective Self-Cleaning SystemFrom Bradford White.A clean tank is just the beginning.
Bradford White’s Hydrojet Total PerformanceSystem gives the plumbing trade a strongtechnological advantage. It applies the laws ofphysics and augments the power of flowingwater to create a new level of top performance.And, it’s standard equipment on all BradfordWhite top connect residential water heaters.*
The Hydro-dynamic achievement of turbulent action.The Hydrojet delivery tube, with a series of concentric“jet ports”, creates an incredible amount of turbulentaction inside the tank. Water flowing into the tankencounters a series of up to 30 flow altering “jetports”. Set at precise space intervals, these portsredirect the flow to create the dynamic mixing action.Unlike a conventional dip tube where water exits witha weak diffusing action, water exiting the Hydrojetsystem is in complete turbulence. This design isexceptionally efficient, measured to be three to fivetimes better than an ordinary dip tube.
Not simply a device to boost performance, theHydrojet system lengthens the operating lifeof a water heater.
A common cause of premature tank failure andreduced energy efficiency in all water heaters issediment build-up. The detrimental effects of thisuniversal problem are interference in heat transfer,lower tank capacity, corrosion, early parts failureand an annoying rumbling noise. The result of allthis is a water heater that must work much harderand consume much more energy.
Take sediment for a ride.When the Hydrojet Total Performance System
goes to work, sediment has no place to hide. Theturbulent action puts dissolved solids such as limeand other minerals into suspension when water isdelivered into the tank. Whenever water is drawn,particles are prevented from settling to the bottom ofthe tank or building up on interior surfaces. TheHydrojet system cleans the tank of harmful depositsevery time there’s a call for hot water.
The lower“jet ports”direct the
flowinward to
increase the turbulence.
The upper“jet ports”direct theflow outwardto begin thedynamicmixingaction.
The bonus is a surprising increase in deliverability.Smooth and efficient operation during continual use and in the first hour provide increasedvolumes of hot water no matter what the capacity of the tank. For instance, the first hourdelivery for our Energy Saver, 40 gallon residential gas water heater was 66.6 gallons. Butnow, equipped with the Hydrojet system, that same unit delivers 75 gallons – more than a10% increase! That translates into more hot water for the money.
1. The Hydrojet system works by creating a strong turbulence in the flow of water asit enters the tank through a technologically advanced delivery tube. Unlike an ordi -nary, open-ended dip tube, the Hydrojet delivery tube harnesses the force of incomingwater to create “turbulent action,” a catalyst for better mixing throughout the tank.2. Incoming water first encounters a series of deflectors called jet ports that forcewater out of the tube and into the tank to begin a dynamic mixing action. A secondset of jet ports then redirects the flow inward causing counter-rotation and increasedpressure fluctuation inside the delivery tube. This completes the creation of thedesired turbulent action.3. Heating efficiency is greatly increased because of better mixing of incoming waterwith stored water. More evenly mixed water allows the water heater to run lessfrequently, providing a longer operating life for the unit.4. Better mixing throughout the tank caused by “turbulent action” yields up to a 10%increase in first hour deliverability. And, according to The Gas ApplianceManufacturer’s Association (GAMA) First Hour Delivery is the primary considerationwhen selecting a water heater. 5. The Hydrojet system provides up to a 3% reduction in energy consumption, basedon testing by the Department of Energy. Better mixing of stored water yields a greateroutput of hot water at the desired temperature with respect to the tank capacity.
6. The turbulent action puts dissolvedsolids (sediment) into suspension, whilethe first series of jet ports also create a path for sediment to enter the tank at a higher level than the end of the delivery tube. Bothof these factors help delay the settling process and reduce sediment build-up.7. Minimizing sediment build up results in more effective heat transfer, reduced energycosts and higher operating efficiency. And because the Hydrojet system suspendssediment that would otherwise accumulate on the bottom of the tank, maintenancerequirements are drastically reduced and the life of the water heater is extended.8. The Hydrojet system greatly reduces thermal stratification or “temperaturestacking” (up to 17% reduction in peak temperatures). Stacking occurs when thewater in the tank lacks thorough mixing. This occurrence will lower operating efficiencyand increase the chance of a scalding accident.9. GAMA publishes data comparing the first hour delivery (FHD) of the five largestwater heater manufacturers. The data shows that Bradford White models with theHydrojet Total Performance System produce more hot water, in equal size tanks, thanany of the competition. 10. Because the Hydrojet system enables water to be heated more efficiently, itprovides more hot water for the money.
Hydrojet System Technical Highlights
*Not available on utility, tabletop, wall hung or side connect models.
Residential Gas Energy Saver FVIR 6/7Water Heaters
Photograph is of M-I-40T6FBN
The FVIR Defender Safety System® Models Feature ■ Bradford White ICON System™
■ Advanced ScreenLok® TechnologyFlame Arrestor Design
■ Resettable thermal switch■ Pedestal base■ Vitraglas® lining■ Factory installed Hydrojet®
Total Performance System■ Water Connections – 3/4" NPT factory
installed true dielectric fittings■ 1" Non-CFC foam insulation■ Protective magnesium anode rod■ Factory installed heat traps■ 3"x4" “Snap Lock” draft diverter
(On models 40,000 BTU/Hr. or less)
■ T&P relief valve included.Some models feature optionaltop opening (Must specifywhen ordering)
■ Low restriction brass drain valve
E
C
8"
B
AD
F
Presenting the New
High-Tech Innovation Meets Intelligent SimplicityThe NEW Bradford White ICON System™ is so
much more than a gas valve. It’s a revolutionaryadvance in water heating control technology availableonly to the professional installer and wholesaler.
The Bradford White ICON System™ offersnumerous energy and timesaving benefits to thehomeowner, contractor and wholesaler and sets anew standard in gas water heater control technology.The Bradford White ICON System™ is standardequipment on Bradford White Residential and LightDuty Commercial products* at no extra cost!
Why has Bradford White invested in such anadvanced control technology? In a word…Customers. Our customers asked for asophisticated yet simple control, one that gives themperformance enhancements and diagnosticcapabilities. Our customers asked for it…and we areproud to deliver the Bradford White ICON System™.
*All Atmospheric Vent and Direct Vent Residential and Light Duty Models except High Performance and Mobile Home Models. Continued on back >>
• Advanced TemperatureControl System - Microprocessorconstantly monitors and controls burneroperation to maintain consistent andaccurate water temperature levels.
• Exclusive PerformanceSoftware - Proprietary algorithmsprovide enhanced First Hour Deliveryratings and tighter temperaturedifferentials.
• Intelligent Diagnostics - An exclusive green LED light promptsthe installer during start-up andprovides ten different diagnostic codesto assist in troubleshooting.
• Pilot-On-Indication - Flashing green LED provides positiveindication that pilot is on.
• Millivolt Powered - An off-the-shelf thermopile convertsheat energy from the pilot flame intoelectrical energy to operate the gasvalve and electronics. No externalelectricity required.
• Separate ImmersedThermowell - High strengthadvanced polymer compositethermowell provides isolation betweenelectronic temperature sensor andsurrounding water. No need to drain the tank whenremoving, or replacing the gas valve.
• Integrated Piezo Igniter - Built into the control itself, the igniter eliminates theneed to open the combustionchamber to light the pilot.
• Universal Replacement - The Bradford White ICON System™
service kits are available for directreplacement, or for the replacement ofRobertshaw or White-Rodgers gas valveson most older Bradford White models.
• Proven Technology - Over 150,000 units installed over the past 3 years have proven thedurability, reliability and simplicity of this technology.
The Perfect Choice In Gas Control Technology
32,00030,00040,00040,00040,00050,00040,00040,00050,00040,000
30302940404050485060
M-I-30T6FBN (LP)•M-I-30S6FBN (LP)M-I-303T6FBN (LP)•M-I-40T6FBN (LP)•M-I-403S6FBN (LP)•M-I-404T6FBN (LP)•M-I-5036FBN (LP)•M-I-50L6FBN (LP)M-I-504S6FBN (LP)•M-I-60T6FBN (LP)
585668767487898893101
33314141415341415342
59 1/8483/858
59 3/850
603/459 5/8493/4581/2603/4
16181618201820222022
3x43x43x43x43x44
3x43x44
3x4
13131313131313131313
104100109120128127145153150166
571/2463/4561/2573/4481/2581/258
481/457
581/4
493/4 / 563/8383/4
493/4 / 551/450 / 565/841 / 471/4511/2/ 5850 / 567/8
401/250 / 553/4
501/2
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC ListedRecovery Efficiency ranging up to 79%
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floorto Water
Conn.
Approx.Shipping
Weight (lbs)
* Based on manufacturers rated recovery efficiency. All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.• Models feature optional top T&P location. Must be specified when ordering. “D” dimension listed as side/top.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
M-I-30T6FSX 31,000 BTU/Hr. 32M-I-30S6FSX 26,000 BTU/Hr. 27M-I-303T6FSX 35,000 BTU/Hr. 37M-I-40T6FSX 36,000 BTU/Hr. 38M-I-403S6FSX 38,000 BTU/Hr. 40M-I-404T6FSX 48,000 BTU/Hr. 50M-I-5036FSX 36,000 BTU/Hr. 38M-I-50L6FSX 38,000 BTU/Hr. 40M-I-504S6FSX 48,000 BTU/Hr. 50M-I-60T6FSX 38,000 BTU/Hr. 40
Residential Gas Energy Saver 8/9High Input Water Heaters
■ Bradford White ICON System™
■ Vitraglas® lining■ Factory installed Hydrojet 2™
Total Performance System■ Water Connections – 1" NPT (M-I-75T)
and 11⁄4" (M-I-100T) factory installedtrue dielectric fittings
■ Side connections - 3/4" NPT tappings■ Pedestal base (M-I-75S only)■ Non-CFC foam insulation■ Protective magnesium anode rod■ 4" “Snap Lock” draft diverter■ T&P relief valve included.■ Low restriction brass drain valve
Photograph is ofM-I-75S6BN
BK
H G & DA
C
E F
76,00085,000
75100
M-I-75S6BN (LP)M-I-100T6BN (LP)
8292
623/86811/16
24281/4
44
15155/16
238420
165/8175/8
513/4595/16
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC ListedRecovery Efficiency ranging up to 80%
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*Input
BTU/Hr.Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toSpace Heating
Return
513/4505/8
G
Floor toSpace Heating
Outlet
596911/16
H
Floor toWaterConn.
283/8321/4
K
Depth
Approx.Shipping
Weight (lbs)
* Based on manufacturers rated recovery efficiency. All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.Hand hole cleanout standard on M-I-100T models.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
M-I-75S6SX 76,000 BTU/Hr. 82M-I-100T6SX 88,000 BTU/Hr. 95
Residential Gas Energy Saver FVIR 10/11Extra Recovery Water Heaters
The XR FVIR Defender Safety System®
Models Feature:■ Bradford White ICON System™
■ Advanced ScreenLok® TechnologyFlame Arrestor Design
■ Resettable thermal switch■ Pedestal base ■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Water Connections – 3/4" NPT
factory installed true dielectricfittings
■ 2" Non-CFC foam insulation(M-1-XR403S has 1")
■ Protective magnesium anode rod■ Factory installed heat traps
■ 3/4" NPT side connections forspace heating
■ 4" “Snap Lock” draft diverter(M-1-XR403 has 3"x4" draftdiverter)
■ T&P relief valve included■ Low restriction brass drain valve
Photograph is ofM-2-XR504T6FBN
E
C
A HG&D
F
*Centers are 8" on M-1-XR403S
11"*
B
40,00065,00065,000
404865
M-1-XR403S6FBN (LP)M-2-XR504T6FBN (LP)M-2-XR65T6FBN (LP)
74103127
436969
50591/463
202224
3x444
1313
123/16
126164205
131/2131/2131/2
4150
531/2
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed79% Recovery Efficiency
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toSpace Heating
Return
4150
531/2
G
Floor toSpace Heating
Outlet
481/257
603/4
H
Floorto Water
Conn.
Approx.Shipping
Weight (lbs)
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
M-1-XR403S6FSX 38,000 BTU/Hr. 40M-2-XR504T6FSX 61,000 BTU/Hr. 65M-2-XR65T6FSX 63,000 BTU/Hr. 67
* Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.
Residential Gas Energy Saver 12/13Extra Recovery Water Heaters
■ Bradford White ICON System™
■ Vitraglas® lining■ Factory installed Hydrojet 2™
Total Performance System■ Water Connections – 1" NPT factory
installed true dielectric fittings■ Side connections - 3/4" NPT tappings■ 2" Non-CFC foam insulation■ Protective magnesium anode rod■ 4" “Snap Lock” draft diverter■ T&P relief valve included■ Low restriction brass drain valve
Photograph is ofM-2-XR75S6BN
G & D
A H
BK
C
E F
76,00075M-2-XR75S6BN (LP) 82 623/8 26 4 137/8 247165/8513/4
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*Input
BTU/Hr.Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toSpace
HeatingReturn
513/4
G
Floor toSpace
HeatingOutlet
59
H
Floorto Water
Conn.
303/8
K
Depth
Approx.Shipping
Weight (lbs)
* Based on manufacturers rated recovery efficiency. All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
M-2-XR75S6SX 76,000 BTU/Hr. 82
Residential Gas Damper Energy Saver 14/15High EF Water Heaters
Photograph is ofD-4-403S6FBN
■ ENERGY STAR® Qualified—Thesemodels qualify for the September 1st,2010 minimum ENERGY STAR® EFrequirement, as well as most utilityrebate programs
■ Advanced ScreenLok® TechnologyFlame Arrestor Design
■ Resettable thermal switch■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Water Connections – 3/4" NPT factory
installed true dielectric fittings■ 2" Non-CFC foam insulation■ Protective magnesium anode rod■ Factory installed heat traps
■ 3"x4" “Snap Lock” draft diverter
■ T&P relief installed■ Low restriction
brass drain valve
38,00040,000
4050
D-4-403S6FBN (LP)D-4-504S6FBN (LP)
7286
4042
553/4641/2
2222
3x43x4
113/4113/4
151170
49573/4
411/250
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
4857
F
Floor toTop ofHeater
G
Floorto Water
Conn.
263/4263/4
H
Depth Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For “10” year models, change suffix from “6” to “10”.115V, 60Hz. 12 Amps. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
D-4-403S6FSX 38,000 BTU/Hr. 40D-4-504S6FSX 40,000 BTU/Hr. 42
Residential Gas Energy Saver FVIR 16/17High EF Water Heaters
■ Bradford White ICON System™
■ Advanced ScreenLok® TechnologyFlame Arrestor Design
■ Resettable thermal switch■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Water Connections – 3/4" NPT
factory installed true dielectricfittings
■ 2" Non-CFC foam insulation■ Protective magnesium anode rod■ Factory installed heat traps■ 3"x4" “Snap Lock” draft diverter
■ T&P relief valve included. Modelsfeature optional top opening(Must be specified when ordering)
■ Low restriction brass drain valve
Photograph is ofM-4-40T6FBN•Optional Dimension
E
CB
OptionalTop T&P
ValveLocation
AFD●
8"
32,00040,00040,00040,00040,000
3040405060
M-4-30T6FBN (LP)•M-4-40T6FBN (LP)•M-4-403S6FBN (LP)•M-4-5036FBN (LP)•M-4-60T6FBN (LP)
58767489101
3443434343
59 1/8593/850
59 5/8603/4
1820222224
3x43x43x43x43x4
1313131313
114128133151192
571/2573/4481/258
581/4
493/4 / 563/850/ 565/841 / 471/450 / 57501/2
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed79% Recovery Efficiency
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floorto Water
Conn.
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For “10” year models, change suffix from “6” to “10”.• Models feature optional top T&P location. Must be specified when ordering. “D” dimension listed as side/top.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
M-4-30T6FSX 31,000 BTU/Hr. 33M-4-40T6FSX 36,000 BTU/Hr. 38M-4-403S6FSX 38,000 BTU/Hr. 40M-4-5036FSX 36,000 BTU/Hr. 38M-4-60T6FSX 38,000 BTU/Hr. 40
Residential Gas Energy Saver 18/19Programmable Efficiency Water Heaters
■ Advanced ScreenLok® TechnologyFlame Arrestor Design
■ Honeywell self diagnosticelectronic gas control
■ Flammable vapor sensor■ Resettable thermal switch■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Fully programmable LCD digital
control■ 2" Non-CFC foam insulation■ Protective magnesium anode rod■ Factory installed heat traps■ 3"x4" “Snap Lock” draft diverter
■ T&P relief valve included■ Low restriction brass drain valve
Photograph is ofPE-4-40T6FBN
D
C
B
E
F
GA
H
40,00040,00040,00065,000
40405048
PE-4-403S6FBN (LP)PE-4-40T6FBN (LP)PE-4-5036FBN (LP)PE-2-XR504T6FBN (LP)
747689103
42424269
503/4601/4603/4601/4
22202222
3 x 43 x 43 x 4
4
111/4111/4111/4111/4
148140161178
47561/2561/2561/2
41505050
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed. 80% Recovery Efficiency
A
Floor toFlue
Conn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toTop ofHeater
48571/2571/2571/2
G
Floorto Water
Conn.
261/4241/4261/4261/4
H
Depth
Approx.Shipping
Weight (lbs)
All propane models feature a Titanium Stainless Steel propane burner.For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.††When tested to the industry standard residential first hour delivery procedure.PE-2-XR504 has 3/4" NPT side connections.Requires two 120VAC outlets. One outlet is for the 24VAC plug-in transformer and the other is theline cord that powers the water heater.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
PE-4-403S6FSX 38,000 BTU/Hr. 40PE-4-40T6FSX 36,000 BTU/Hr. 38PE-4-5036FSX 36,000 BTU/Hr. 38PE-2-XR504T6FSX 61,000 BTU/Hr. 65
Residential Gas Energy Saver 20/21High Performance Water Heaters
Photograph is ofGX-2-25S6BN
HJ G & D A
KB
C
E F
PLUG TYPEANODE
■ High input combustion system■ Integrated Mixing Device■ Helical fin flue■ Vitraglas® lining■ Factory installed Hydrojet®2™
Total Performance System■ Water Connections – 3/4" NPT factory
installed true dielectric fittings■ Non-CFC foam insulation■ Two protective magnesium anode rods■ 4" “Snap Lock” draft diverter■ 3/4" NPT side tappings for space heating■ T&P relief valve installed■ Low restriction brass drain valve
78,00080,000
2555
GX-2-25S6BN (LP)GX-1-55S6BN (LP)
155200
8486
581/2595/8
1822
44
1413/16
1413/16
150200
157/16
157/16
5050
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed82% Recovery Efficiency
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour††DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toSpace Heating
Return
5050
G
Floor toSpace Heating
Outlet
545/856
H
Floorto Heater
Top
585/860
J
Floorto WaterConn.†
22261/4
K
Depth
Approx.Shipping
Weight (lbs)
All propane models feature a Titanium Stainless Steel propane burner.For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.††When tested to the industry standard residential first hour delivery procedure.†Dimension to top of installed mixing device.GX-2 has 2" of insulation.GX-1 has 1" of insulation.Gas connections are 1⁄2".
Integrated Mixing Device(Installation required for operation)
X
Z
Y
ModelNumber
XDistanceBetweenCenters
in.
ZHeight
toCenterof Pipe
in.
YDepth ofMixingDevice
in.
GX-2-25S6BNGX-1-55S6BN
88
66
21/2
21/2
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
GX-2-25S6SX 76,000 BTU/Hr. 82GX-1-55S6SX 78,000 BTU/Hr. 84
Residential Gas Energy Saver 22/23TTW® High Performance Water Heaters
■ High input combustion system■ Integrated Mixing Device■ Helical fin flue■ Vitraglas® lining■ Factory installed Hydrojet®2™
Total Performance System■ Water Connections – 3/4" NPT factory installed
true dielectric fittings■ Non-CFC foam insulation■ Two protective magnesium anode rods■ Powerful blower motor■ Honeywell self diagnostic electronic gas control■ Flammable vapor sensor (not FVIR compliant)■ Spark-to-pilot ignition■ Horizontal and vertical venting■ 3/4" NPT side tappings for space heating■ T&P relief valve installed■ Low restriction brass drain valve Photograph is of
GX-2-TW-25S6BN
E F
H D & GJ
A
C
KB
76,00078,000
2555
GX-2-TW-25S6BN (LP)GX-1-TW-55S6BN (LP)
155200
8284
625/8633/4
1822
3 or 43 or 4
111/2111/2
170215
133/8133/8
4848
Power Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed82% Recovery Efficiency
A
Floorto VentConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour††DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toSpace Heating
Return
4848
G
Floor toSpace Heating
Outlet
527/854
H
Floorto Heater
Top
567/858
J
Floorto WaterConn.†
253/8273/8
K
Depth
Approx.Shipping
Weight (lbs)
All propane models feature a Titanium Stabilized Stainless Steel propane burner.For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.†Dimension to top of installed mixing device.††When tested to the industry standard residential first hour delivery procedure.GX-2 has 2" of insulation.GX-1 has 1" of insulation.Gas connections are 1⁄2".
Integrated Mixing Device(Installation required for operation)
X
Z
Y
ModelNumber
XDistanceBetweenCenters
in.
ZHeight
toCenterof Pipe
in.
YDepth ofMixingDevice
in.
GX-2-TW25S6BNGX-1-TW55S6BN
88
66
21/2
21/2
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
GX-2-TW25S6SX 76,000 BTU/Hr. 82GX-1-TW55S6SX 78,000 BTU/Hr. 84
†Consult I&O manual when using four or more elbows.Subtract 5ft. for each additional 90° elbow.
3"Vent Pipe
4"Vent PipeGX-1-TW-55S6BN
GX-2-TW-25S6BN
†60 ft.7 ft.55 ft.50 ft.45 ft.
†180 ft.15 ft.175 ft.170 ft.165 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows 3
Residential Gas Energy Saver FVIR 24/25TTW®1 Water Heaters
■ Advanced ScreenLok®
Technology Flame ArrestorDesign
■ Flammable vapor sensor■ Powerful blower motor■ Honeywell self diagnostic
electronic gas control■ Spark-to-pilot ignition system■ Horizontal and vertical venting■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Water Connections – 3/4" NPT
factory installed true dielectricfittings
■ 1" Non-CFC foam insulation■ Protective magnesium anode
rod■ Factory installed heat traps■ T&P relief valve included■ Low restriction brass drain
valve
Photograph is ofM-1-TW-40S6FBN
H
C
A
G F
E
B
D
40,00040,00042,000
405060
M-1-TW-40S6FBN (LP)M-1-TW-50S6FBN (LP)M-1-TW-60T6FBN (LP)
7286100
434345
561/2573/868
202222
2 or 32 or 32 or 3
113/4113/4113/4
135160193
461/2471/8573/4
401/2407/8507/8
Power Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto VentConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toTop ofHeater
48491/4581/2
G
Floorto Water
Conn.
247/8263/4271/4
H
Depth
Approx.Shipping
Weight (lbs)
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
M-1-TW-40S6FSX 38,000 BTU/Hr. 41M-1-TW-50S6FSX 38,000 BTU/Hr. 41M-1-TW-60T6FSX 40,000 BTU/Hr. 43
*Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.110 V.A.C. Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.
2"Vent Pipe
3"Vent PipeM-1-TW-60T
M-1-TW-50SM-1-TW-40S
50 ft.7 ft.45 ft.40 ft.35 ft.
120 ft.15 ft.115 ft.110 ft.105 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
†Consult I&O manual when using four or more elbows.Subtract 5ft. for each additional 90° elbow.
Residential Gas Energy Saver 26/27TTW® High EF Water Heaters
Photograph is ofM-4-TW-40T6FBN
■ High Energy Factor (EF) –These models qualify formost energy rebateprograms as well as theSeptember 1, 2010minimum ENERGY STAR®
EF requirement■ Advanced ScreenLok®
Technology FlameArrestor Design
■ Flammable vapor sensor■ Powerful blower motor■ Honeywell self diagnostic
electronic gas control■ Horizontal and vertical
venting
■ Vitraglas® Lining■ Factory installed Hydrojet®
Total Performance System■ Water Connections 3/4"
NPT factory installed truedielectric fittings
■ Pedestal base■ 2" Non-CFC foam
insulation■ Protective magnesium
anode rod■ Factory installed heat
traps■ T&P relief valve included■ Low restriction brass
drain valve
C
A
G F
E
B
D
H
40,00040,00040,000
405060
M-4-TW40T6FBN (LP)M-4-TW50T6FBN (LP)M-4-TW60T6FBN (LP)
728698
434343
676768
202224
222
113/4113/4113/4
152175210
563/457
573/4
5050
501/2
Power Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed 80% Recovery Efficiency
A
Floor toVent
Conn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toTop ofHeater
573/458
583/4
G
Floorto Water
Conn.
247/8263/4283/4
H
Depth
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.110 V.A.C. Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
M-4-TW-40T6FSX 38,000 BTU/Hr. 41M-4-TW-50T6FSX 38,000 BTU/Hr. 41M-4-TW-60T6FSX 38,000 BTU/Hr. 41
2"Vent Pipe
3"Vent PipeM-4-TW-60
M-4-TW-50M-4-TW-40
50 ft.7 ft.45 ft.40 ft.35 ft.
120 ft.15 ft.115 ft.110 ft.105 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
†Consult I&O manual when using four or more elbows.Subtract 5ft. for each additional 90° elbow.
Residential Gas Energy Saver FVIR 28/29TTW®2 Water Heaters
The TTW®2 FVIR Defender Safety System®
Models Feature (Except M-2-TW75):■ Advanced ScreenLok®
Technology FlameArrestor Design
■ Flammable vapor sensorAll TTW®2 Models Feature:■ Powerful blower motor■ Honeywell self diagnostic
electronic gas control■ Spark to pilot ignition system■ Horizontal and vertical venting■ Vitraglas® Lining■ Factory installed Hydrojet® Total
Performance System
■ Water Connections 3/4" NPTfactory installed true dielectricfittings
■ 3/4" NPT side connections■ Pedestal base■ 2" Non-CFC foam insulation■ Protective magnesium anode rod■ Factory installed heat traps■ T&P relief valve included■ Low restriction brass drain valve
Photograph is ofM-2-TW-50T6FBN
K
C
AJ H
E F
B
D & G
67,00070,00076,000
486575
M-2-TW-50T6FBN (LP)M-2-TW-65T6FBN (LP)M-2-TW-75T6BN (LP)
108126—
727582
657/869
683/8
222426
3 or 43 or 43 or 4
113/4113/415
188222277
131/2131/2173/4
501/8531/253
Power Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto VentConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toSpace Heating
Return
501/8531/253
G
Floor toSpace Heating
Outlet
563/8591/2601/4
H
Floorto Heater
Top
573/4603/4611/2
J
Floorto Water
Conn.
263/4283/431
K
Depth Approx.Shipping
Weight (lbs)
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
M-2-TW-50T6FSX 60,000 BTU/Hr. 65M-2-TW-65T6FSX 63,000 BTU/Hr. 68M-2-TW-75T6SX 75,500 BTU/Hr. 81
*Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.110 V.A.C. Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.
†Consult I&O manual when using four or more elbows.Subtract 5ft. for each additional 90° elbow.**M-2-TW-75 Max. 3" vent length is 50ft.
3"Vent Pipe
4"Vent Pipe
M-2-TW-65TM-2-TW-75T
M-2-TW-50T
60 ft. 7 ft.
55 ft.50 ft.45 ft.
** 180 ft. 15 ft.175 ft.170 ft.165 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
Residential Gas Energy Saver FVIR 30/31Ultra Low NOx Water Heaters
■ Defender® combustion chamber■ Ultra low NOx burner with primary
and secondary air distributiondevices
■ Vitraglas® Lining■ Factory Installed Hydrojet® Total
Performance System■ Honeywell self diagnostic gas control■ Millivolt powered control with built-in
piezo igniter■ No electricity required■ Digital thermal sensor and resettable
thermal switch■ Pedestal base■ Water Connections 3/4" NPT factory
installed true dielectric fittings
■ 1" Non-CFC Foam Insulation■ Factory installed heat traps■ Protective magnesium anode rod■ 3x4 “Snap Lock” draft diverter■ T&P relief valve included ■ Low restriction brass drain valve■ Meets SCAQMD Rule 1121 (10ng/J)
E
C
AD
F ●
G
B
8"
•Optional T&P Location Dimension.“D” dimension listed as side/top.
Photo is ofU1-5036FRN
30,00032,00040,00040,00050,00040,00040,00040,000
3030404040504860
U1-30S6FRNU1-30T6FRN•U1-403S6FRN•U1-40T6FRN•U1-404T6FRN•U1-5036FRN•U1-50L6FRNU1-60T6FRN
3133424253424242
483/8
591/8
50593/8
603/4
595/8
493/4
603/4
1816201818202222
3x43x43x43x44
3x43x43x4
115/8
115/8
115/8
115/8
115/8
115/8
115/8
13
110113137130137154163166
383/4
493/4 / 563/8
41 / 471/4
50 / 565/8
511/2 / 5850 / 567/8
401/2
501/2
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed78% Recovery Efficiency
A
Floor toFlue
Conn.
B
JacketDia.
GPHRecovery
90°F Rise*
5456727786908696
1st Hour**DeliveryRating*
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floor toT&P
Conn.
E
Floor toGas
Conn.463/4
571/2
481/2
573/4
581/2
58481/4
581/4
F
Floor toWaterConn.
221/4
201/4
241/4
221/4
221/4
241/4
261/4
261/4
G
Depth
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.Available in natural gas only.For 10 year models, change suffix from “6” to “10”.• Models feature optional top T&P location and must be specified when ordering.All models meet SCAQMD rule 1121 requirement of 10ng/J, or less, NOx emissions.Identical dimensions - same diameter, height and connections as standard units for ease of installation.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.
Residential Gas Energy Saver FVIR 32/33Ultra Low NOx Extra Recovery Water Heaters
■ Defender® combustion chamber■ Ultra low NOx burner with primary
and secondary air distribution devices■ Vitraglas® Lining■ Factory Installed Hydrojet® Total
Performance System■ Honeywell self diagnostic gas control■ Millivolt powered control with built-in
piezo igniter■ No electricity required■ Digital thermal sensor and resettable
thermal switch■ Pedestal base■ Water Connections 3/4" NPT factory
installed true dielectric fittings
■ 3/4" NPT side connections■ 2" Non-CFC Foam Insulation■ Factory installed heat traps■ Protective magnesium anode rod■ T&P relief valve included ■ Low restriction brass drain valve■ Meets C.E.C Title 24, SCAQMD
Rule 1121 (10ng/J)
Photograph is ofU2-XR-504T6FRN
E
C
A
F
D&GH
K
B
8"
(U1-XR has 1")
40,00055,00055,000
404865
U1-XR-403S6FRNU2-XR-504T6FRNU2-XR-65T6FRN
7291116
435757
50591/463
202224
241/42628
4150
531/2
137174213
131/2131/2131/2
481/257
603/4
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed78% Recovery Efficiency
A
Floorto
FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
K
Depth
H
Floorto
WaterConn.
G
Floorto SpaceHeatingOutlet
F
Floor toSpace
HeatingReturn
115/8115/8115/8
E
Floorto
GasConn.
3 x 444
C
VentSize
4150
531/2
D
Floorto
T&PConn.
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.Available in natural gas only.For 10 year models, change suffix from “6” to “10”.All models meet SCAQMD rule 1121 requirement of 10ng/J, or less, NOx emissions.Identical dimensions - same diameter, height and connections as standard units for ease of installation.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.
Residential Gas Energy Saver FVIR 34/35Ultra Low NOx High EF Water Heaters
■ Defender® combustion chamber■ Ultra low NOx burner with primary
and secondary air distribution devices■ Vitraglas® Lining■ Factory Installed Hydrojet® Total
Performance System■ Honeywell self diagnostic gas control■ Millivolt powered control with built-in
piezo igniter■ No electricity required■ Digital thermal sensor and resettable
thermal switch■ Pedestal base■ Water Connections 3/4" NPT factory
installed true dielectric fittings
■ 2" Non-CFC Foam Insulation■ Factory installed heat traps■ Protective magnesium anode rod■ 3x4 “Snap Lock” draft diverter■ T&P relief valve included ■ Low restriction brass
drain valve■ Meets C.E.C
Title 24, SCAQMDRule 1121 (10ng/J)
Photograph is ofU4-5036FRN
E
C
AD
H ●
K
B
8"
•Optional T&P Location Dimension.“D” dimension listed as side/top.
32,00040,00040,00040,00040,000
3040405060
U4-30T6FRN•U4-40T6FRN•U4-403S6FRN•U4-5036FRN•U4-60T6FRN
3443434343
591/8593/850
595/8603/4
1820222224
3x43x43x43x43x4
1313131313
123137143160192
571/2573/4481/258
581/4
493/4/ 563/850/ 565/841/ 471/450/ 57501/2
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floor toFlue
Conn.
B
JacketDia.
GPHRecovery
90°F Rise*
5677729096
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floor toT&P
Conn.
E
Floor toGas
Conn.
H
Floorto Water
Conn.
221/4241/4261/4261/4281/4
K
Depth
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.Available in natural gas only.For 10 year models, change suffix from “6” to “10”.•Models feature optional top T&P location and must be specified when ordering.All models meet SCAQMD rule 1121 requirement of 10ng/J, or less, NOx emissions.Identical dimensions - same diameter, height and connections as standard units for ease of installation.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.
Residential Gas Energy Saver TTW®1 36/37Ultra Low NOx Water Heaters
Photograph is ofU-1-TW-40S6FRN
C
A
G F
E
B
D
H
■ Defender® combustion chamber■ Ultra low NOx burner with primary
and secondary air distributiondevices
■ Vitraglas® Lining■ Factory Installed Hydrojet® Total
Performance System■ Honeywell self diagnostic gas control■ Flammable vapor sensor■ Powerful blower motor■ Horizontal and vertical venting■ Sight window■ Pedestal base■ Water Connections 3/4" NPT factory
installed true dielectric fittings
■ 1" Non-CFC Foam Insulation■ Factory installed heat traps■ Protective magnesium anode rod■ T&P relief valve included ■ Low restriction brass drain valve■ Meets SCAQMD Rule 1121 (10ng/J)
40,00040,00042,000
405060
U-1-TW-40S6FRNU-1-TW-50S6FRNU-1-TW-60T6FRN
7286100
434345
561/2573/868
202222
247/8263/4271/4
139160192
461/2471/8573/4
48491/4581/2
Power Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto
VentConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
H
Depth
G
Floorto
WaterConn.
F
Floorto
Top ofHeater
113/4113/4113/4
E
Floorto
GasConn.
222
C
VentSize
401/2401/2507/8
D
Floorto
T&PConn.
Approx.Shipping
Weight (lbs)
Available in Natural Gas only.*Based on manufacturers rated recovery efficiency.For 10 year models, change suffix from “6” to “10”.110 V.A.C. Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.
†Consult I&O manual when using four or more elbows.Subtract 5ft. for each additional 90° elbow.
2"Vent Pipe
3"Vent Pipe
U-1-TW-50U-1-TW-60
U-1-TW-40
†50 ft. 7 ft.
45 ft.40 ft.35 ft.
†120 ft. 15 ft.115 ft.110 ft.105 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
Residential Gas Energy Saver TTW® 38/39High EF Ultra Low NOx Water Heaters
Photograph is ofU-4-TW-40T6FRN
C
A
G F
E
B
DH
■ High Energy Factor (EF) – Thesemodels qualify for most energyrebate programs as well as theSeptember 1, 2010 minimumENERGY STAR® EF requirement
■ Defender® combustion chamber■ Ultra low NOx burner with primary
and secondary air distributiondevices
■ Vitraglas® Lining■ Factory Installed Hydrojet® Total
Performance System■ Honeywell self diagnostic gas control■ Flammable vapor sensor■ Powerful blower motor■ Horizontal and vertical venting
■ Sight window■ Pedestal base■ Water Connections 3/4" NPT factory
installed true dielectric fittings■ 2" Non-CFC Foam Insulation■ Factory installed heat traps■ Protective magnesium anode rod■ T&P relief valve
included■ Low restriction
brass drain valve■ Meets SCAQMD
Rule 1121 (10ng/J)
40,00040,00040,000
405060
U-4-TW-40T6FRNU-4-TW-50T6FRNU-4-TW-60T6FRN
678698
434343
676768
202224
247/8263/4283/4
152175210
563/457
573/4
573/458
583/4
Power Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed. 80% Recovery Efficiency
A
Floorto
VentConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
H
Depth
G
Floorto
WaterConn.
F
Floorto
Top ofHeater
113/4113/4113/4
E
Floorto
GasConn.
222
C
VentSize
5050
501/2
D
Floorto
T&PConn.
Approx.Shipping
Weight (lbs)
Available in Natural Gas only.*Based on manufacturers rated recovery efficiency.For 10 year models, change suffix from “6” to “10”.110 V.A.C. Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.
†Consult I&O manual when using four or more elbows.Subtract 5ft. for each additional 90° elbow.
2"Vent Pipe
3"Vent Pipe
U-4-TW-50U-4-TW-60
U-4-TW-40
†50 ft. 7 ft.
45 ft.40 ft.35 ft.
†120 ft. 15 ft.115 ft.110 ft.105 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
Residential Gas Energy Saver TTW®2 40/41Ultra Low NOx Water Heaters
C
A
J H
E F
B
D & GK
■ Defender® combustion chamber■ Ultra low NOx burner with primary
and secondary air distributiondevices
■ Vitraglas® Lining■ Factory Installed Hydrojet® Total
Performance System■ Honeywell self diagnostic gas control■ Flammable vapor sensor■ Powerful blower motor■ Horizontal and vertical venting■ Sight window■ Pedestal base■ Water Connections 3/4" NPT factory
installed true dielectric fittings
■ 2" Non-CFC Foam Insulation■ Factory installed heat traps■ Protective magnesium anode rod■ T&P relief valve included ■ Low restriction brass drain valve■ Meets SCAQMD Rule 1121 (10ng/J)
Photograph is ofU-2-TW-50T6FRN
60,00060,000
4865
U-2-TW-50T6FRNU-2-TW-65T6FRN
101116
6565
657/869
2224
263/4283/4
501/8531/2
184215
131/2131/2
573/4603/4
Power Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto
VentConn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
K
Depth
J
Floorto
WaterConn.
563/8591/2
H
Floorto
Top ofHeater
G
Floorto SpaceHeatingOutlet
F
Floor toSpace
HeatingReturn
113/4113/4
E
Floorto
GasConn.
33
C
VentSize
501/8531/2
D
Floorto
T&PConn.
Approx.Shipping
Weight (lbs)
Available in Natural Gas only.*Based on manufacturers rated recovery efficiency.For 10 year models, change suffix from “6” to “10”.110 V.A.C. Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.
†Consult I&O manual when using four or more elbows.Subtract 5ft. for each additional 90° elbow.
3"Vent Pipe
4"Vent PipeU-2-TW-65
U-2-TW-50
†60 ft. 7 ft.
55 ft.50 ft.45 ft.
†180 ft. 15 ft.175 ft.170 ft.165 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
Residential Gas Energy Saver FVIR 42/43PDX1 Water Heaters
■ Closed combustion ventingsystem
■ Flammable vapor sensor ■ Powerful blower motor■ Honeywell self diagnostic
electronic gas control■ Spark-to-pilot ignition system■ Horizontal and vertical venting■ Vitraglas® lining■ Factory installed Hydrojet®
Total Performance System■ Cast aluminum intake boot■ Water Connections – 3/4" NPT
factory installed true dielectricfittings
■ 1" Non-CFC foam insulation■ Protective magnesium
anode rod■ Factory installed heat traps■ T&P relief valve included■ Low restriction brass drain
valve
Photograph is ofPDX1-40S6FBN
A
E
C C
Durable Cast AluminumAir Intake Boot
C
D
J HF
B
K
40,00040,000
4050
PDX1-40S6FBNPDX1-50S6FBN
7288
4343
583/4595/8
2022
301/2323/8
146171
483/4495/8
501/851
Power Direct Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto
ExhaustOutlet
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
K
Depth
J
Floorto
WaterConn.
F
Floor toTop ofHeater
1414
E
Floorto
GasConn.
553/8563/8
H
FloortoAir
Intake2 or 32 or 3
C
VentSize
423/4431/8
D
Floorto
T&PConn.
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.110 V.A.C. Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
PDX1-40S6FSX 38,000 BTU/Hr. 41PDX1-50S6FSX 38,000 BTU/Hr. 41
Note: Subtract 5ft. for each additional 90º elbow. †Consult I&O Manual when usingfour or more elbows.
2" Vent PipePDX1-40SPDX1-50S
35 ft.35 ft.7 ft.30 ft.25 ft.20 ft.
Max. Intake LengthMax. Exhaust LengthMin. Vent LengthNumber 1of 290° Elbows† 3
3" Vent PipePDX1-40SPDX1-50S
85 ft.85 ft.7 ft.80 ft.75 ft.70 ft.
Max. Intake LengthMax. Exhaust LengthMin. Vent LengthNumber 1of 290° Elbows† 3
Intake/CombustionAir Rain Cap
VentExhaust
33 3/8"
Optional2" Concentric Vent
Terminal KitP/N 239-44069-02
Residential Gas Energy Saver FVIR 44/45PDX2 Water Heaters
■ Closed combustion ventingsystem
■ Flammable vapor sensor ■ Powerful blower motor■ Honeywell self diagnostic
electronic gas control■ Spark-to-pilot ignition
system■ Horizontal and vertical
venting■ Vitraglas® lining■ Factory installed Hydrojet®
Total Performance System■ Cast aluminum intake boot
■ 3/4" NPT side connectionsfor space heating
■ Water Connections – 3/4"NPT factory installed truedielectric fittings
■ 2" Non-CFC foam insulation■ Protective magnesium anode
rod■ Factory installed heat traps■ T&P relief valve included■ Low restriction brass drain
valve
Photograph is ofPDX2-50T6FBN
A
K
J B
D & G
H
E F
C
Durable Cast AluminumAir Intake Boot
60,00065,00070,000
486575
PDX2-50T6FBN (LP)PDX2-65T6FBN (LP)PDX2-75T6FBN (LP)
105120140
657075
68711/471
222426
32321/836
521/4555/8541/2
303330375
153/4153/419
593/463
633/4
Power Direct Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto
ExhaustOutlet
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
K
Depth
J
Floorto
WaterConn.
G
Floorto SpaceHeatingSupply
F
Floor toSpace
HeatingReturn
135/8135/8161/4
E
Floorto
GasConn.
67691/2693/8
H
FloortoAir
Intake3 or 43 or 43 or 4
C
VentSize
521/4555/8541/4
D
Floorto
T&PConn.
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.110 V.A.C. Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
PDX2-50T6FSX 60,000 BTU/Hr. 65PDX2-65T6FSX 60,000 BTU/Hr. 65PDX2-75T6FSX 65,000 BTU/Hr. 70
Note: Subtract 5ft. for each additional 90º elbow. †Consult I&O Manual when using four or more elbows.
3" Vent PipePDX2-50TPDX2-65T
60 ft.60 ft.7 ft.55 ft.50 ft.45 ft.
PDX2-75T
50 ft.50 ft.7 ft.45 ft.40 ft.35 ft.
Max. Intake LengthMax. Exhaust LengthMin. Vent LengthNumber 1of 290° Elbows† 3
4" Vent PipePDX2-50TPDX2-65T
100 ft.100 ft.7 ft.95 ft.90 ft.85 ft.
PDX2-75T
90 ft.90 ft.7 ft.85 ft.80 ft.75 ft.
Max. Intake LengthMax. Exhaust LengthMin. Vent LengthNumber 1of 290° Elbows† 3
Intake/CombustionAir Rain Cap
VentExhaust
46 3/4"
Optional3" Concentric Vent
Terminal KitP/N 239-44069-01
Residential Gas Energy Saver FVIR 46/47Direct Vent Water Heaters
C
AB
F
E
H
73/4"
KD
C
A
E
73/4"
K
Photograph is ofDS1-50S6FBN
■ Bradford White ICON System™
■ Reinforced seals■ Closed combustion–Co-axial Vent
System-outer pipe takes air infrom the outside. Inner pipe ventscombustion gases directly back tothe outside
■ Vitraglas® lining■ Factory installed Hydrojet®
Total Performance System■ Water Connections – 3/4" NPT
factory installed true dielectricfittings
■ Cast aluminum intake boot■ 1" Non-CFC foam insulation■ Optional flex vent kit
■ Protective magnesiumanode rod
■ Factory installed heat traps■ T&P relief valve included■ Low restriction
brass drain valve
Flexible Vent Kit(Side View)
Telescoping Solid Vent Kit(Side View)
38,00042,000
4050
DS1-40S6FBN (LP)DS1-50S6FBN (LP)
7199
4145
631/4 min.721/4 min.
2020
493/4583/4
431/2521/4
162181
503/4593/4
147/8147/8
Direct Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floor toCenter Line
of Vent
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
F
Floor toTop ofHeater
E
Floor toGas
Conn.
D
Floor toT&P
Conn.
H
Floorto Water
Conn.
313/4313/4
K
Depth
3 I.D., 5 O.D.3 I.D., 5 O.D.
C
VentDia.
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.Telescoping Solid Vent Kit (239-47810-00) or Flexible Vent Kit (239-47812-00) can be ordered and shipped with water heater, orordered and shipped separately For vent kit components and venting instructions, refer to Installation and Operating Manual.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
DS1-40S6FSX 36,000 BTU/Hr. 39DS1-50S6FSX 40,000 BTU/Hr. 43
Optional solid vent kit : Kit “A” Telescopes from 43⁄4" to 511⁄16" Part No. 239-41260-00Kit “B” Telescopes from 61⁄2" to 93⁄16" Part No. 239-41331-00Kit “C” Telescopes from 133⁄4" to 2311⁄16" Part No. 239-41029-00Kit “D” Telescopes from 4913⁄16" to 9513⁄16" Part No. 239-41424-00
Horizontal vent termination only.
Residential Gas Energy Saver FVIR 48/49High Input Direct Vent Water Heaters
Photograph is ofDH1-504T6FBN
C
AB
F
E
H
73/4"
KD&G
J
C
A
E
73/4"
K
■ Bradford White ICON System™
■ Reinforced seals■ Closed combustion–Co-axial
Vent System-outer pipe takes airin from the outside. Inner pipevents combustion gases directlyback to the outside
■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Water Connections – 3/4" NPT
factory installed true dielectricfittings
■ 3/4" NPT side tappings for spaceheating
■ Cast aluminum intake boot■ 1" Non-CFC foam insulation
■ Optional flex vent kit■ Protective magnesium
anode rod■ Factory installed heat traps
■ T&P relief valve included■ Low restriction brass drain valve
Flexible Vent Kit(Side View)
TelescopingSolid Vent Kit(Side View)
50,00055,00060,000
486575
DH1-504T6FBN (LP)DH1-65T6FBN (LP)DH1-75S6FBN (LP)
93113125
525661
751/4781/4751/2
2022
241/2
583/46259
521/45652
197243281
521/45652
151/4151/4151/4
Direct Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed78% Recovery Efficiency
A
Floor toCenter Line
of Vent
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
F
Floor toTop ofHeater
593/46360
H
Floor toWaterConn.
313/4313/4351/2
K
Depth
E
Floor toGas
Conn.
153/4153/4161/2
J
SpaceHeating
Inlet
D
Floor toT&P
G
SpaceHeatingOutlet
4 I.D.,6 O.D.4 I.D.,6 O.D.4 I.D.,6 O.D.
C
VentDia.
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.For 10 year models, change suffix from “6” to “10”.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.The Standard Vent Kit (239-42979-00) is ordered and shipped seperately and the components are as follows:4" vent tube, 6" Air Intake Tube, Vent Terminal, Inner Wall Term. Mounting Flange, Outer Wall Term.Mounting Flange, Vent Terminal Hardware, RTV Silicone Sealant, 4" Vent Elbow and a 6" Air Intake Elbow. The Vent Tube and Air Intake Tube provided in the same standard vent kit telescopes from 133⁄4" to 2311⁄16". All models come standard with side connections for space heating 3⁄4" NPT.Circulating Loop Installation Kit (Optional — Not included with the water heater)265-43103-00 (Dielectric Unions, Isolation Valves and Extended Nipples) Telescoping Solid Vent Kit (239-47810-00) or Flexible Vent Kit (239-47812-00) can be ordered and shipped with water heater, orordered and shipped separately For vent kit components and venting instructions, refer to Installation and Operating Manual.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
DH1-504T6FSX 48,000 BTU/Hr. 50DH1-65T6FSX 55,000 BTU/Hr. 58DH1-75S6FSX 57,000 BTU/Hr. 60
Optional solid vent kit : Kit “F” Telescopes from 43⁄4" to 511⁄16" Part No. 239-42516-00Kit “G” Telescopes from 61⁄2" to 93⁄16" Part No. 239-42517-00Kit “H” Telescopes from 133⁄4" to 2311⁄16" Part No. 239-42514-00Kit “I” Telescopes from 4913⁄16" to 9513⁄16" Part No. 239-42512-00
Horizontal Vent Termination Only.
EVERHOT® Gas 50/51Tankless Water Heater
Interior Exterior
■ ENERGY STAR® Qualified—These modelsqualify for the September 1st, 2010minimum ENERGY STAR® EF requirement,as well as most utility rebate programs.
■ Interior and Exterior Models—Twelve units(Natural Gas and Propane Gas) with selfregulating maximum BTU/hr. inputs rangingfrom 150,000-199,000.
■ Digital Main Controller— Interior modelshave a digital controller integrated into thefront panel of the water heater with a defaulttemperature range of 96°F-120°F (140°Fmaximum). Exterior models are shippedwith a primary remote controller with adefault temperature range of 96°F-120°F(140°F maximum). An optional MainController/Residential (p/n 239-44509-00)can be wired remotely and provides adefault temperature range of 96°F-120°F(140°F maximum).
■ Commercial Conversion Capability—Forapplication flexibility, all models can beconverted to a commercial model with theuse of a commercial controller.
■ Commercial Controller—An optional MainController/Commercial (p/n 239-47805-00)is available for commercial and hydronicapplications (maximum temperature settingfor each model on reverse side).
■ Continuous Flow—Supplies hot watercontinuously at the temperature set point.
■ Heat Exchanger—Nine pass design tomaximize heat transfer and efficiency.
■ Direct Electronic Ignition—No standingpilot.
■ Fully Automatic Controls—Outgoing watertemperature is monitored by a built-insensor. Burner and combustion blowermodulate between minimum and maximuminput to maintain setpoint temperature.
■ Diagnostic Capabilities—Error messagesin numerical codes are displayed on primarycontrol.
■ Space Saving Installation—Compact sizefor tight installations (mounts on the wall).
■ Lime Accumulation Sensor—Built into theheat exchanger to alert of build-up.
■ Co-Axial Venting—Interior models can bevented horizontally through a wall orvertically through the roof. Maximumequivalent vent length is 41ft. Interiormodels have dedicated venting systemcomponents that must be orderedseparately (see I&O manual for specificventing components).
A
B C
A
B C
EVERHOT® Tankless Gas Water HeaterDIMENSIONS IN INCHES
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed
NATURAL GAS AND LIQUID PROPANE MODELS
ModelNumber
Approx.Shipping
Weight (lbs.)HeightInstallation
GPM Flow Rateat °F
Temperature Rise
TG-150I-NTG-150E-NTG-180I-NTG-180E-NTG-199I-NTG-199E-N
IndoorOutdoorIndoor
OutdoorIndoor
Outdoor
Nat. and LPBTU/Hr.
Input
15,000-150,00015,000-150,00015,000-180,00015,000-180,00015,000-199,00015,000-199,000*
35°F
5.05.07.57.59.49.4
EF RatingNat. and LP65°F
4.24.24.64.65.05.0
100°F
2.52.53.03.03.33.3
503750465046
0.820.820.820.820.820.82
232023232323
GPMFlow Rate
Min. Max.
0.60.60.60.60.60.6
5.05.07.57.59.49.4
Width
141414141414
Depth
A B C
91/27
91/21091/210
Comm. ControlMaximum
TemperatureSetting
160°F160°F160°F160°F180°F180°F
Indoorverticalventing
Indoorhorizontal
venting
Outdoorwall
mountOutdoor
recessed box(Optional accessory)
*LP Input is 190,000.For LP Models change suffix “N” to “X”.Low Nox emissions less than 40 ppm.Note: Not recommended for use as a booster.Requires 120 volt service and a 15 amp breaker.
Samplepiping
diagram
Residential Gas Energy Saver 52/53Manufactured Home Water Heaters
Direct Vent:■ Closed combustion vent package including air intake tube, roof jack and hardware
(Must be ordered with heater, not included in heater carton.)■ Vitraglas® Lining■ Convertible control for use with propane or natural gas■ Water Connections 3/4" NPT factory installed true dielectric fittings■ 1" Non-CFC foam insulation■ Protective magnesium anode rod■ Factory installed heat traps (on hot water outlet side)■ T&P relief valve installed■ Low restriction brass drain valve
Photograph is ofM-I-MS30T6LX
D
EF
C
AGB
Direct Vent Energy Saver ModelsDIMENSIONS IN INCHES
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed76% Recovery Efficiency
30,00030,000
3040
M-I-MS30T6LXM-I-MS40T6LX
5259
3131
573/8577/8
1618
33
133/4133/4
106126
221/2221/2
5050
NATURAL GAS AND LIQUID PROPANE GAS MODELS A
Floor toTop ofHeater
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
Nat./LPInput
BTU/Hr.Gal.Cap.
ModelNumber
C
VentSize
D
Floor toT&P
Conn.
E
Floor toGas
Conn.
F
Floor toCold Water
Inlet
583/8587/8
G
Floor toHot Water
Outlet
Approx.Shipping
Weight (lbs)
To order Natural Gas heaters change “X” to “N”.Design evaluated in accordance with the H.U.D. Manufactured Home Construction and Safety Standards, Title 24 CFR, Part 3280.707(d)(2) for energy efficiency.For 10 year models, change suffix from “6” to “10”.The cold water inlet is on the side and the hot water outlet is on the top.**First Hour Delivery Rating is based on the March 2010 AHRI Directory* Based on manufacturers rated recovery efficiency.
Residential Gas Energy Saver FVIR 54/55Manufactured Home Water Heaters
Atmospheric Vent:■ Advanced ScreenLok® Technology Flame
Arrestor Design■ Resettable thermal switch■ Piezo igniter■ Roof jack package for installation flexibility.
(Must be ordered with heater, not included in heater carton.)■ Vitraglas® Lining■ Convertible control for use with propane or natural gas.■ Water Connections 3/4" NPT factory installed true
dielectric fittings■ 1" Non-CFC foam insulation■ Factory installed heat traps (On hot water outlet side)■ Protective magnesium anode rod■ T&P relief valve included■ Low restriction brass drain valve
Photograph is ofM-I-MH30T6FLX
B
C
G
E
ANODE
AD
F
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed77% Recovery Efficiency
32,00034,000
3040
M-I-MH30T6FLXM-I-MH40T6FLX
5660
3335
591/8593/8
1618
3x43x4
1313
104120
221/4221/4
5050
NATURAL GAS AND LIQUID PROPANE GAS MODELS A
Floor toFlue
Conn.
B
JacketDia.
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
Nat./LPInput
BTU/Hr.Gal.Cap.
ModelNumber
C
VentDia.
D
Floor toT&P
Conn.
E
Floor toGas
Conn.
F
Floor toCold Water
Inlet
571/2573/4
G
Floor toHot Water
Outlet
2022
Depth
Approx.Shipping
Weight (lbs)
* Based on manufacturers rated recovery efficiency.To order Natural Gas heaters change “X” to “N”.For 10 year models, change suffix from “6” to “10”.Not approved for installation where a direct vent/closed combustion system is required. Design evaluated in accordance with the H.U.D. Manufactured Home Construction and Safety Standards, Title 24 CFR, Part 3280.707(d)(2) for energy efficiency.The cold water inlet is on the side and the hot water outlet is on the top.**First Hour Delivery Rating is based on the March 2010 AHRI Directory
Residential Gas Energy Saver 56/57Ultra High Efficiency Water Heaters
■ 95% thermal efficiency■ Low NOx premix power burner■ Self compensating negative
pressure combustion system■ Honeywell integrated control■ Two different digitally displayed
operation modes■ Can vent vertically or horizontally■ Supplemental heating capability—
two 1" NPT side connections■ Factory installed Hydrojet® Total
Performance System■ Vitraglas® Lining■ Direct spark ignition■ Water connections 1" NPT factory
installed true dielectric fittings■ 1" Non-CFC foam insulation
■ Optional concentric vent kittermination
■ Thermostatic mixing deviceincluded
■ 4 protective magnesium anode rod■ T&P relief valve installed■ Low restriction brass drain valve
H
DJ
FE
G
C
C
A
BPhotograph is of
EFR-1-60T1206EN
120,00060EFR-1-60T1206EN 154 57 281/4 3 531/2 570521/240
eF Series® Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed95% Thermal Efficiency
A
Floor toHeater
Top
B
JacketDia.
GPHRecovery
90°F Rise*Input
BTU/Hr.Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toAir Intake
Conn.
5
G
Floor toExhaust
Vent Conn.
13
H
Floor toCold Water
Inlet
421/2
J
Floor toHot Water
Outlet
Approx.Shipping
Weight (lbs)
* Based on manufacturers rated recovery efficiency. For propane (LP) models change suffix “EN” to “SX”.
Intake/CombustionAir Rain Cap
VentExhaust
33 3/8"
Optional 2" Concentric Vent Terminal KitP/N 239-44069-02
Intake/CombustionAir Rain Cap
VentExhaust
46 3/4"
Optional 3" Concentric Vent Terminal KitP/N 239-44069-01
Note: Air intake cannot exceed exhaust by more than 30 ft. in any venting situation. Subtract 5ft. for each additional 90º elbow.†Consult I&O Manual when using four or more elbows.
2" Vent PipePower
Direct VentPowerVent
30 ft.30 ft.7 ft.25 ft.20 ft.15 ft.
N/A60 ft.7 ft.55 ft.50 ft.45 ft.
Max. Intake LengthMax. Exhaust LengthMin. Vent LengthNumber 1of 290° Elbows† 3
3" Vent PipePower
Direct VentPowerVent
60 ft.60 ft.7 ft.55 ft.50 ft.45 ft.
N/A120 ft.7 ft.
115 ft.110 ft.105 ft.
Max. Intake LengthMax. Exhaust LengthMin. Vent LengthNumber 1of 290° Elbows† 3
4" Vent PipePower
Direct VentPowerVent
85 ft.85 ft.7 ft.80 ft.75 ft.70 ft.
N/A170 ft.7 ft.
165 ft.160 ft.155 ft.
Max. Intake LengthMax. Exhaust LengthMin. Vent LengthNumber 1of 290° Elbows† 3
Residential Electric Energy Saver 58/59Water Heaters
All models are UL listed. All water connections are 3⁄4" NPT factory installed true dielectric fittings(M-2-120R has 1" dielectric waterway fittings). All electrical connections are 3⁄4". All models are certified at300 PSI test pressure and 150 PSI working pressure. All models come equipped with two installed heat traps(except Utility, Wall Hung models, M-1-20L and M-2-120R).Note: The Upright and Lowboy heaters will be wired single phase interlocking (non-simultaneous) 240 voltwith 4500 watt elements, unless otherwise specified. Other wattages are available up to 6000 watts (208,240, 277 and 480 volt). (Reference chart on following page for non-simultaneous and simultaneouslimitations). 4500 watt/240 volt elements require a 25 amp circ uit breaker. For 120 volt (non-simultaneous),all models have a maximum wattage of 3000. (120 and 277 volt can only be wired single phase.)Note: The Utility and Wall Hung Heaters will be wired for 120 volt with a 1500 watt element. 1500 watt/120volt element requires a 20 amp breaker. Other wattages are available. Maximum wattage for 6, 10, 12 and15 gallon capacities is 3000 watt. (Reference chart on following page for single element limitations). Maximum wattage for 19 and 30 gallon sizes is 6000 watt (208, 240, 277 and 480 volt). For 120V (non-simultaneous), all models have a maximum wattage of 3000 watts. (120 and 277 volt can only be wiredsingle phase.)
General
Incoloy Element Availability Chart
yesnonononononononono
120V
1500200025003000350040004500500055006000
Watts
yesyesyesyesyesyesyesyesyesyes
208V
yesyesyesyesyesyesyesyesyesyes
240V
noyesnoyesnoyesyesyesyesyes
277V
noyesnoyesnoyesyesyesyesyes
480V
VoltageWattage
Limitations forSimultaneous
Operation
1500W / 1500W2000W / 2000W2500W / 2500W3000W / 3000W3500W / 3500W4000W / 4000W4500W / 4500W5000W / 5000W5500W / 5500W6000W / 6000W
yesnonononononononono
120V
yesyesyesyesyesyesyesyesnono
208V
yesyesyesyesyesyesyesyesyesno
240V
yesyesyesyesnoyesyesyesnoyes
277V
yesyesyesyesnoyesyesyesnoyes
480V
VoltageWattage
Limitations forNon-Simultaneous
Operation
1500W / 1500W2000W / 2000W2500W / 2500W3000W / 3000W3500W / 3500W4000W / 4000W4500W / 4500W5000W / 5000W5500W / 5500W6000W / 6000W
WattageLimitations forSingle Element
Operation
1500W2000W2500W3000W3500W4000W4500W5000W5500W6000W
yesyesyesyesnononononono
120V
yesyesyesyesyesyesyesyesyesyes
208V
yesyesyesyesyesyesyesyesyesyes
240V
yesyesyesyesnoyesyesyesnoyes
277V
yesyesyesyesnoyesyesyesnoyes
480V
DesignatorVoltage
A120
E277
H480
J600
L*208
C208/240
DesignatorWatt
J1000
K1250
L1500
M2000
N2500
P3000
R3500
S3800
T4000
W4500
X5000
Y5500
Z6000
Phase 13
Single PhaseThree Phase
Operation NS
Non-simultaneousSimultaneous
Designator240V Wattage208V Wattage
J1000—
K1250—
L15001000
M20001500
N25002000
P3000—
R35002500
S3800—
T40003000
W45003500
X5000—
Y55004000
Z60004500
X**—
5000
Y**—
5500†
Z**—
6000†
EX: M240T6DS-1NCWW
EX: M240T6DS-1NCWW
EX: M240T6DS-1NCWW
EX: M240T6DS-1NCWW, will give 240V with 4500W/4500W. This same heater can also be energized at 208V with reduced wattage of 3500W/3500W.**Use “L” voltage designator if wiring 208V with 5000, 5500 or 6000 watt.†Available in non-simultaneous only.
EX: M240T6DS-1NCWW*Use “L” voltage designator if wiring 208V with 5000, 5500or 6000 watt.
For 120V, 277V, 480V, and 600V operation
For 240V and 208V operation (Dual rated elements show a value for both 240V and 208V)
Residential Electric 60/61Energy Saver Water Heaters
■ Vitraglas® lining■ Factory installed Hydrojet® Total Performance System■ Water Connections – 3/4" NPT factory installed true dielectric fittings
(M-2-120R has 1" NPT dielectric fittings)■ 2" Non-CFC foam insulation■ Fully automatic controls■ Direct heat transfer with immersed screw-type elements■ Protective magnesium anode rod■ Factory installed heat traps (Except M-2-120R)■ T&P relief valve included■ Low restriction brass drain valve
Photograph is ofM-2-50T6DS
D
8"
CA
B
30404050506580119
M-2-30R6DSM-2-40S6DSM-2-40T6DSM-2-50S6DS†M-2-50T6DSM-2-65R6DSM-2-80R6DSM-2-120R6DS
50565667677792118
2020202020202020
1820182220222428
473/1̀6
467/8593/4461/2571/2591/459
623/4
85103110130123156183305
473/16
467/8593/4461/2571/2591/4591/4621/4
Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed
B
JacketDiameter
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
GallonCapacity
ModelNumber
A
Floor toHeater Top
483/1̀6
477/8603/4471/2581/4601/4601/4641/4
C
Floor toWater Conn.
D
Floor toT&P Conn.
Approx.Shipping
Weight (lbs)
*Based on 4500 W/4500 W non-simultaneous operation.For single element models change letter “D” to “S”.For 10 year models change suffix from “6” to “10”.†Available with Optional Hand Hole Cleanout.T&P relief valve opening on the top of the tank.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.Refer to page 58/59 for general notes.
▲(GPH based on Non-Simultaneousoperation, when Simultaneousoperation the GPH will approximatelydouble.)
RecoveryGPH Temperature Rise °F
Wattage
1500200025003000350040004500500055006000
60
10141721242831343841
80
8101315182123262931
90
79
1114161820232528
100
68
1012141619212325
120
579
10121415171921
▲
Residential Electric Energy Saver 62/63Lowboy Water Heaters
B
A
8"
DC
■ Lowboy models are offered with optional side/top T&Prelief valve location (Must be specified when ordering)
■ Vitraglas® lining■ Factory installed Hydrojet® Total Performance System■ Water Connections – 3/4" NPT factory installed true
dielectric fittings■ 2" Non-CFC foam insulation (except M-1 models)■ Fully automatic controls■ Direct heat transfer with immersed screw-type elements■ Protective magnesium anode rod■ Factory installed heat traps (Except M-1-2OL)■ T&P relief valve included■ Low restriction brass drain valve
Photograph is ofM-2-40L6DS“D” Dimension listed as Side/Tap
19303040404747
M-1-20L6DSM-1-30L6DSM-2-30L6DSM-1-40L6DSM-2-40L6DSM-1-50L6DSM-2-50L6DS
—474758586767
20202020202020
18202222242426
247/83030
311/4321/8313/4321/8
588696115121140143
191/4/247/824/293/8
241/8/311/4241/8/313/4241/8/333/8241/8/313/4241/8/333/8
Lowboy Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed
B
JacketDiameter
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
GallonCapacity
ModelNumber
A
Floor toHeater Top
257/8305/831
327/8331/8331/8331/8
C
Floor toWater Conn.
D
Floor toT&P Conn.
Approx.Shipping
Weight (lbs)
M-1-30L, M-1-40L and M-1-50L models supplied with insulation jacket in order to meet efficiency requirements of the Department of Energy. *Based on 4500 W/4500 W non-simultaneous operation.For single element models change letter “D” to “S”. For 10 year models, change number from “6” to “10”. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.Refer to page 58/59 for general notes.
▲(GPH based on Non-Simultaneousoperation, when Simultaneousoperation the GPH will approximatelydouble.)
RecoveryGPH Temperature Rise °F
Wattage
1500200025003000350040004500500055006000
60
10141721242831343841
80
8101315182123262931
90
79
1114161820232528
100
68
1012141619212325
120
579
10121415171921
▲
Residential Electric Energy Saver 64/65Utility Water Heaters
■ Side connections for cold waterinlet and hot water outlet allowsinstallation in tight places
■ 6 and 12 gallon models comeequipped with alternate waterconnections tappings on top
■ Vitraglas® lining
■ Water Connections – 3/4" NPTfactory installed true dielectricfittings
■ 1" Non-CFC foam insulation(M-2-30 has 2" of insulation)
■ Direct heat transfer with immersedscrew-type elements
■ Protective magnesium anode rod■ T&P relief valve included■ Low restriction brass drain valve
Photograph is ofM-1-12UT6SS
B
C DF
E
G
A
B
F
F
C
E
D
GA
4" ALTERNATECOLD INLET(PLUGGED)6, 12 GAL.
ONLY
PLUG TYPEANODE
6, 12, & 30GAL. ONLY
ALTERNATE HOTOUTLET (PLUGGED)
6, 12 GAL. ONLY
8"
Top View6, 12, 20 & 30 Gallon Models6, 12, 20 & 30 Gallon Models 10 & 15 Gallon Models
6101212151930
M-1-6U6SS†M-1-10U6SS†M-1-12U6SS†M-1-12UT6SS†M-1-15U6SS†M-1-20U6SSM-2-30U6SS
7777777
14161814181822
161/2171/2167/8273/4201/4243/430
33484848555982
Utility Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed
B
JacketDiameter
GPHRecovery
90°F Rise*
——————19
1st Hour**DeliveryRating
GallonCapacity
ModelNumber
A
Floor toHeater Top
101/815
101/4211/8173/4181/4231/2
101/814
101/4211/8163/4181/4231/2
C
Floor to HotWater Conn.
31/8511/16
33
61/83
41/2
E
Floor to ColdWater Conn.
D
Floor toT&P Conn.
161/2911/16
161/2273/4101/8101/430
F
Floor toAnode Rod
161/212
167/8273/4
1211/16
243/430
G
Floor toElectrical
Access
Approx.Shipping
Weight (lbs)
* Based on 1500 W element operation.First suffix letter “S” indicates single element.For 10 year models, change number from “6” to “10”. Refer to page 58/59 for general notes.†Maximum wattage at any voltage is 3000W.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.
RecoveryGPH Temperature Rise °F
Wattage
1500200025003000350040004500500055006000
60
10141721242831343841
80
8101315182123262931
90
79
1114161820232528
100
68
1012141619212325
120
579
10121415171921
Residential Electric Energy Saver 66/67Wall Hung Water Heaters
■ Vitraglas® lining■ Water Connections – 3/4" NPT
factory installed true dielectricfittings
■ Factory installed heavy duty wallmounting bracket
■ 1" Non-CFC foam insulation –surrounds the tank surface (theM-2-WH30 has 2" Non-CFC foaminsulation)
■ Fully automatic controls
■ Direct heat transfer withimmersed screw-type elements
■ Protective magnesium anode rod■ T&P relief valve included
Photograph is ofM-1-WH20L6SSC
WALL ELECTRICAL JUNCTION B
8 INCHES
BTOPVIEW
BOTTOMVIEWFRONT
HOTOUTLET
COLDINLET
HOT OUTLET COLD INLET
3/4" RELIEF VALVE OPENING
SIDEVIEW
A AD E
B
FRONTVIEW
12-13/16"
HEATING ELEMENT & THERMOSTAT ACCESS
WALL
6121930
M-1-WH6U6SS†M-1-WH12U6SS†M-1-WH20L6SSM-2-WH30L6SS
7777
14181822
153/4163/8243/8291/4
33475886
Wall Hung Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed
B
JacketDiameter
GPHRecovery
90°F Rise*
———19
1st Hour**DeliveryRating
GallonCapacity
ModelNumber
A
Floor toHeater Top
145/8185/8185/8205/8
113/4123/4181/423
C
Wall toFront
117/8121/221
253/4
E
Floor toT&P Conn.
D
Floor toBracket
Approx.Shipping
Weight (lbs)
*Based on 1500 W element operation.Suffix letter “S” indicates single element.For 10 year models, change suffix number from “6” to “10”.Refer to page 58/59 for general notes.†Maximum wattage at any voltage is 3000W.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.
RecoveryGPH Temperature Rise °F
Wattage
1500200025003000350040004500500055006000
60
10141721242831343841
80
8101315182123262931
90
79
1114161820232528
100
68
1012141619212325
120
579
10121415171921
Residential Electric Energy Saver 68/69High Efficiency Water Heaters
Photograph is ofM-2-HE50S6DS
D
8"
CA
B
■ Vitraglas® lining■ Factory installed Hydrojet® Total Performance System■ Water Connections – 3/4" NPT factory installed true
dielectric fittings■ 2" Non-CFC foam insulation■ Fully automatic controls■ Direct heat transfer with Immersion elements■ Protective magnesium anode rod■ Factory installed heat traps■ T&P relief valve included■ Low restriction brass drain valve
40506580
M-2-HE40S6DSM-2-HE50S6DSM-2-HE65R6DSM-2-HE80R6DS
57677792
20202020
20222224
477/8471/2601/4601/4
118131160191
477/8471/2601/4601/4
High Efficiency Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed
B
JacketDiameter
GPHRecovery
90°F Rise*
1st Hour**DeliveryRating
GallonCapacity
ModelNumber
A
Floor toHeater Top
487/8481/2611/4611/4
C
Floor toWater Conn.
D
Floor toT&P Conn.
Approx.Shipping
Weight (lbs)
*Based on 4500 W/4500 W non-simultaneous operation.For single element change suffix letter “D” to “S”.For 10 year models, change suffix number from “6” to “10”.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.Refer to page 58/59 for general notes.
RecoveryGPH Temperature Rise °F
Wattage
1500200025003000350040004500500055006000
60
10141721242831343841
80
8101315182123262931
90
79
1114161820232528
100
68
1012141619212325
120
579
10121415171921
▲
▲(GPH based on Non-Simultaneousoperation, when Simultaneousoperation the GPH will approximatelydouble.)
Residential Electric Energy Saver 70/71Powerful Compact Water Heater
■ Ideal for use wherever remote hot water is needed – in offices, stores, work stations, etc.■ Compact Design – (121⁄4" H x 97⁄8" Dia.), handsome and easy to install■ Operates on ordinary house current (110-120 volts - 1500 watts)■ Temperature range of 110°-160°F■ Deep-drawn steel tank with exclusive Vitraglas® lining■ Fully-automatic controls■ 4' cord includes 3-prong, grounded plug■ T&P relief valve included■ Steel Jacket – with special coating that inhibits rust and corrosionOptional Features:■ Wall mounting brackets■ Aluminum anode rod■ NC compliant
Photograph is ofM1-2U6SS
2M1-2U6SS 7 121/4 97/8 14
Powerful Compact Electric ModelDIMENSIONS IN INCHES
ELECTRIC
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed
A
Floor toHeater
Top
GPHRecovery
90°F Rise*
UtilityStyle
GallonCapacity
ModelNumber
B
JacketDiameter
135/16
C
Floor toWaterConn.
Approx.Shipping
Weight (lbs)
*Based on 1500 W element operation.For 10 year models, change number “6” to “10”.Water connections are 3⁄4" NPT.
A
C
B
Solar Saver® Series – Electric 72/73Solar Water Heaters
■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Equipped with a 4500 watt element
and automatic thermostat – where aback up system is desired. If storageonly is desired do not connect the unitto the electrical service.
■ Top of tank access for wiring andwater connections
■ Pre-wired sensor lead■ Thermal feet■ Water connections – 3/4" NPT factory
installed true dielectric fittings ■ 2" Non-CFC foam insulation■ Protective magnesium anode rod■ Consult factory for other wattages■ T&P relief valve included■ Low restriction brass drain valve
B
A
C
ED
F
4
1
3
2
8"8"
#1 - 3/4" Pump Suction#2 - 3/4" Cold Inlet#3 - 3/4" Collector Return#4 - 3/4" Hot Outlet
Photograph is of MS80R6SS
6580119
MS65R6SSMS80R6SS†MS120R6SS†
5959
621/2
222428
6060
631/2
521/2521/256
168210310
Solar ModelsDIMENSIONS IN INCHES
SOLAR
Meet or exceed ASHRAE 90.1b (current standard)
C
Floor to Water Conn.
B
JacketDia.
A
Floor to Heater Top
Gal.Cap.
ModelNumber
D
Floor toT&P Conn.
—38
381/4
E
Fl. to Alt.Coll. Return
Conn.
—77/877/8
F
Fl. to Alt.Coll. Supply
Conn.
Approx.Shipping
Weight (lbs)
NOTE: Suffix letter “S” denotes single element and surface mounted thermostat.If requirements are for storage only, do not use element connections.Second suffix letter “S” denotes Screw-Type Element. Meets California Energy Commission requirements.†Models offer optional pump suction and collector return connections.
EcoStor™ SC Solar Indirect System 74/75Single Coil With Electric Backup Water Heaters
■ Heat exchanger – Single wall 11⁄2"O.D. glass coated (Vitraglas®) steelcoil
■ Supplied sensor wires for solarthermistor connections
■ Integrated Mixing Device■ Element backup – Single or dual
4500W heating elements■ Factory installed Hydrojet® Total
Performance System■ Vitraglas® lining■ 1" NPT female connections on
front for supply and return■ Potable water connections – 3/4"
NPT factory installed true dielectricfittings
■ 2" Non-CFC foam insulation■ Two protective anode rods■ T&P relief valve included■ Low restriction brass drain valve
CD
F
E
A
BSolar Sensor WiringJunction Box
Optional Outletfor Recirculation(S-SW2-60R & S-SW2-75R)
Solar Thermistor Wires Upper Heating Elementwith Thermostat
Thermostat(controls lower element)
Solar Thermistor WiresLower Heating Element Photograph is of
S-SW2-60R6DS
6075115
S-SW2-60R6DSS-SW2-75R6DSS-SW2-115R6DS
591/4591/4623/4
2224
281/2
631/4631/4661/2
5353
553/4
210236340
EcoStor™ Single-Wall Solar Indirect ModelsDIMENSIONS IN INCHES
SOLAR C
Floor to Water Conn.
B
JacketDia.
A
Floor to Heater Top
Gal.Cap.
ModelNumber
D
Floor toT&P Conn.
291/2291/2291/2
E
Floor toSolar Coll.
Supply
73/873/873/8
F
Floor toSolar Coll.
Return
Approx.Shipping
Weight (lbs)
ModelNumber Single
ElementDual
Element
Electric Backup Water Heating Ratings
First Hour Supply (Gal.) StandbyHeat Loss
Rating(°F/Hr.)
S-SW2-60R6DSS-SW2-75R6DSS-SW2-115R6DS
465383
8497124
1.10.90.7
Heat Exchanger Pressure Drop Curve
Flow Rate (GPM)
Pres
sure
Dro
p (P
SID
)
Hea
d Lo
ss (f
t. w
.c.)
16.00
14.00
12.00
10.00
8.00
6.00
4.00
2.00
0.00
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.000 1 2 3 4 5 6 7 8 9 10 11 12 13 14
For single element models change “D” to “S”.(Ex. S-SW2-60R6SS)
EcoStor2™ SC Solar Indirect System 76/77Single Coil With Electric Backup Water Heaters
■ Heat exchanger – Double wall 11⁄2"O.D. glass coated (Vitraglas®) steelcoil
■ Supplied sensor wires for solarthermistor connections
■ Integrated Mixing Device■ Element backup – Single or dual
4500W heating elements■ Factory installed Hydrojet® Total
Performance System■ Vitraglas® lining■ 3/4" NPT female connections on
front for supply and return■ Potable water connections – 3/4"
NPT factory installed true dielectricfittings
■ 2" Non-CFC foam insulation
■ Two protectiveanode rods
■ T&P relief valve included■ Low restriction brass drain valve
CD
F
E
A
Solar Sensor WiringJunction Box
Optional Outletfor Recirculation(S-DW2-60R & S-DW2-75R)
Solar Thermistor Wires Upper Heating Elementwith Thermostat
Thermostat(controls lower elementon dual element models)
Solar Thermistor WiresLower Heating Element(on dual element models)
B
Photograph is ofS-DW2-60R6DS
6075115
S-DW2-60R6DSS-DW2-75R6DSS-DW2-115R6DS
591/4591/4623/4
2224
281/4
631/2631/2663/4
5353
553/4
217241345
EcoStor2™ Double-Wall Solar Indirect ModelsDIMENSIONS IN INCHES
SOLAR C
Floor to Water Conn.
B
JacketDia.
A
Floor to Heater Top
Gal.Cap.
ModelNumber
D
Floor toT&P Conn.
291/2291/2291/2
E
Floor toSolar Coll.
Supply
73/873/873/8
F
Floor toSolar Coll.
Return
Approx.Shipping
Weight (lbs)
ModelNumber Single
ElementDual
Element
Electric Backup Water Heating Ratings
First Hour Supply (Gal.) StandbyHeat Loss
Rating(°F/Hr.)
S-DW2-60R6DSS-DW2-75R6DSS-DW2-115R6DS
465383
8497124
1.10.90.7
For single element models change “D” to “S”.(Ex. S-DW2-60R6SS)
Heat Exchanger Pressure Drop Curve
Flow Rate (GPM)
Pres
sure
Dro
p (P
SID
)
Hea
d Lo
ss (f
t. w
.c.)
16.00
14.00
12.00
10.00
8.00
6.00
4.00
2.00
0.00
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.000 1 2 3 4 5 6 7 8 9 10 11 12 13 14
EcoStor™ DC Solar Indirect System 78/79Dual Coil Heat Exchanger Backup Water Heaters
■ Applications—Dual heatexchangers located inside the tankmay be connected to a variety ofdifferent heating systems
■ Dual coil design—A single wallheat exchanger is located in theupper portion of the tank. A doublewall heat exchanger is located inthe lower portion of the tank
■ Sensor wires for solar thermistorconnections
■ Integrated Mixing Device■ Factory Installed Hydrojet® Total
Performance System■ Vitraglas® lining■ Supply and return connections—1"
NPT upper coil, 3⁄4" NPT lower coil
■ 2" Non-CFC Foam Insulation■ Potable water connections—3⁄4"
NPT factory installed true dielectricfittings extend water heater lifeand eases installation
■ Two protective anode rods■ T&P relief valve included■ Low restriction brass drain valve
CD
H
GF
E
A
B Solar Sensor Wiring Junction Box
Electric WiringJunction Box
SolarThermistorWiresandThermostat
SolarThermistorWiresandThermostat
Photograph is ofS-DC-DW2-55R6SW
5070110
S-DC-DW2-55R6SWS-DC-DW2-70R6SWS-DC-DW2-110R6SW
591/4591/4621/2
2224
281/4
631/4631/4661/2
5353
553/4
282313442
EcoStor™ Solar Indirect ModelsDIMENSIONS IN INCHES
SOLAR C
Floor to Water Conn.
B
JacketDia.
A
Floor to Heater Top
Gal.Cap.
ModelNumber
D
Floor toT&P Conn.
371/2371/2391/4
F
Floor toUpper Coll.
Return
5656
573/4
E
Floor toUpper Coll.
Supply
53/853/853/8
H
Floor toLower Coll.
Return
271/2271/2271/2
G
Floor toLower Coll.
Supply
Approx.Shipping
Weight (lbs)
0.00
2.00
4.00
6.00
8.00
10.00
12.00
0.00
5.00
10.00
15.00
20.00
25.00
Single-wall (Upper Coil)
Double-wall (Lower Coil)
Heat Exchanger Pressure Drop Curve
Flow Rate (GPM)
Pres
sure
Dro
p (P
SI)
Hea
d Lo
ss (f
t. w
.c.)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
EcoStor2™ SC Solar Indirect System 80/81Single Coil Gas Backup Models
■ Backup Low NOx Burner■ Heat exchanger – Double wall 11⁄2"
O.D. glass coated (Vitraglas®) steelcoil
■ Self diagnostic Honeywell gascontrol
■ Sensor wires for solar thermistorconnections
■ Integrated Mixing Device■ Factory Installed Hydrojet® Total
Performance System■ Vitraglas® lining■ 3/4" NPT female connections on
front for supply and return■ 2" Non-CFC Foam Insulation
■ Potable water connections—3⁄4"NPT factory installed true dielectricfittings
■ Two protective anode rods■ T&P relief valve included■ Low restriction brass drain valve■ S-DW2-75 is not FVIR
A
C
B
G
F
H
E J
D
SolarThermistorWires,Gas ControlSensor
SolarThermistorWires
ANODES
KSolar SensorWiringJunction Box
Photograph is ofS-DW2-504T6FBN
65,00065,00076,000
456075
S-DW2-504T6FBN(LP)S-DW2-65T6FBN(LP)S-DW2-75S6BN(LP)
696982
591/463
623/8
222426
444
113/8113/8143/8
150200306
321/4321/4345/8
50531/252
EcoStor™ Double-Wall Solar Indirect ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*Input
BTU/Hr.Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
H
Floor toSolar Collector
Supply
101/8101/8121/2
J
Floor toSolar Collector
Return
56591/259
F
Floorto Heater
Top
60631/463
G
Floorto Water
Conn.
2628
303/8
K
Depth
Approx.Shipping
Weight (lbs)
Heat Exchanger Pressure Drop Curve
Flow Rate (GPM)
Pres
sure
Dro
p (P
SID
)
Hea
d Lo
ss (f
t. w
.c.)
16.00
14.00
12.00
10.00
8.00
6.00
4.00
2.00
0.00
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.000 1 2 3 4 5 6 7 8 9 10 11 12 13 14
* Based on manufacturers rated recovery efficiency. Propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.
(LP) Propane Gas Inputs GPH Rec. 90°F Rise
S-DW2-504T6FSX 61,000 BTU/Hr. 65S-DW2-6ST6FSX 63,000 BTU/Hr. 67S-DW2-75S6SX 76,000 BTU/Hr. 82
EcoStor2™ SC Solar Indirect System 82/83Single Coil Power Vent Gas Backup Models
■ Backup Low NOx Burner■ Heat exchanger – Double wall 11⁄2"
O.D. glass coated (Vitraglas®) steelcoil
■ Self diagnostic electronic Honeywellgas control
■ Sensor wires for solar thermistorconnections
■ Horizontal and vertical venting■ Powerful blower motor■ Integrated Mixing Device■ Factory Installed Hydrojet® Total
Performance System■ Vitraglas® lining■ Supply and return connections—3⁄4"
NPT■ 2" Non-CFC Foam Insulation
■ Potable water connections—3⁄4" NPTfactory installed true dielectric fittings
■ Two protective anode rods■ T&P relief valve included■ Low restriction brass drain valve■ S-DW2-TW-75 is not FVIR
A
C
B
G
F
H
E J
D
SolarThermistorWires,Gas ControlSensor
SolarThermistorWires
KSolar SensorWiringJunction Box
Photograph is ofS-DW2-TW-65T6FBN
67,00070,00076,000
456070
S-DW2-TW-50T6FBN(LP)S-DW2-TW-65T6FBN(LP)S-DW2-TW-75T6BN(LP)
727582
591/463
623/8
222426
3 or 43 or 4
4
113/8113/8143/8
247281336
321/4321/4345/8
50531/252
EcoStor2™ Double-Wall Solar Indirect ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*Input
BTU/Hr.Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
H
Floor toSolar Collector
Supply
101/8101/8121/2
J
Floor toSolar Collector
Return
56591/259
F
Floorto Heater
Top
60631/4623/4
G
Floorto Water
Conn.
2628
303/8
K
Depth
Approx.Shipping
Weight (lbs)
Heat Exchanger Pressure Drop Curve
Flow Rate (GPM)
Pres
sure
Dro
p (P
SID
)
Hea
d Lo
ss (f
t. w
.c.)
16.00
14.00
12.00
10.00
8.00
6.00
4.00
2.00
0.00
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.000 1 2 3 4 5 6 7 8 9 10 11 12 13 14
†Consult I&O manual whenusing four or more elbows.Subtract 5ft. for eachadditional 90° elbow.**S-DW2-TW-75 Max. 3" ventlength is 50ft.
3"Vent Pipe
4"Vent PipeS-DW2-TW-75T6FBN
S-DW2-TW-65T6FBNS-DW2-TW-50T6FBN
†60 ft.**7 ft.55 ft.50 ft.45 ft.
†180 ft.15 ft.175 ft.170 ft.165 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
* Based on manufacturers rated recovery efficiency. Propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”. (LP) Propane Gas Inputs GPH Rec.
90°F RiseS-DW2-TW-50T6FSX 60,000 BTU/Hr. 65S-DW2-TW-65T6FSX 63,000 BTU/Hr. 68S-DW2-TW-75T6SX 75,500 BTU/Hr. 81
EcoStor2™ SC Solar Indirect System 84/85Single Coil Eco-Defender Gas Backup Models
■ Eco-Defender Safety System®
■ Backup Low NOx Burner■ Heat exchanger – Double wall 11⁄2"
O.D. glass coated (Vitraglas®) steelcoil
■ Self diagnostic Honeywell gascontrol
■ Sensor wires for solar thermistorconnections
■ Integrated Mixing Device■ Factory Installed Hydrojet® Total
Performance System■ Vitraglas® lining■ Supply and return connections—
3⁄4" NPT■ 2" Non-CFC Foam Insulation
■ Potable water connections—3⁄4"NPT factory installed true dielectricfittings
■ Two protective anode rods■ T&P relief valve included■ Low restriction brass drain valve
A
C
B
G
F
H
E J
D
SolarThermistorWires,Gas ControlSensor
SolarThermistorWires
ANODES
KSolar SensorWiringJunction Box
Photograph is of S-DW4-U5036FRN
40,00055,000
4560
S-DW4-U5036FRNS-DW2-U65T6FRN
4357
591/463
2224
34
115/8115/8
233272
321/4321/4
50531/2
EcoStor2™ Double-Wall Solar Indirect ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
90°F Rise*Input
BTU/Hr.Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
H
Floor toSolar Collector
Supply
101/8101/8
J
Floor toSolar Collector
Return
561/4591/2
F
Floorto Heater
Top
60631/4
G
Floorto Water
Conn.
2628
K
Depth
Approx.Shipping
Weight (lbs)
Heat Exchanger Pressure Drop Curve
Flow Rate (GPM)
Pres
sure
Dro
p (P
SID
)
Hea
d Lo
ss (f
t. w
.c.)
16.00
14.00
12.00
10.00
8.00
6.00
4.00
2.00
0.00
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.000 1 2 3 4 5 6 7 8 9 10 11 12 13 14
*Based on manufacturers rated recovery efficiency.All models meet SCAQMD rule 1121 requirement of 10ng/J, or less, NOx emissions.
Residential Oil-Fired Energy Saver 86/87Aero® Series Water Heaters
SUGGESTED BURNER
Photograph is ofCF-32-6
■ Oil heats water 3 to 4 times fasterthan other fuels, resulting in highrecovery rates
■ Electronic Aquastat controller with7-segment trouble-shooting LEDdisplay
■ Water Connections – 3/4" NPT factoryinstalled true dielectric fittings
■ Factory installed Hydrojet® TotalPerformance System(center flue models only)
■ Flexible stainless steel flue baffle(center flue models only)
■ Two magnesium anode rods(rear flue has one)
■ Easy, space-saving installation■ High density fiberglass insulation■ Low restriction brass drain valve■ T&P relief valve included
F&G
B
J J
E E
DH A
D
F
G
A
CK
KC
B
Center Flue Rear Flue
98/113113/128
128128
188/203
3250303050
CF-32-6CF-50-6RF-30-6RF-30SX-6RF-50-6
91/105105/119
119119
175/189
0.65/0.750.75/0.85
0.850.85
1.25/1.35
511/8603/16
477/8423/16
607/8
2022
241/4243/4261/2
66667
113/16
113/16
131/8133/8133/16
215275250210360
501/8583/4
1811/16
1811/16
21
4215/16
5115/16
483/8413/16
603/4
Aero® Series Energy Saver Oil-Powered ModelsDIMENSIONS IN INCHES
A
Floor toFlue
Conn.
B
JacketDia.
Min./Max.Firing RateNo. 2 Oil
GPHMBTUH†
Input
GPHRecovery
90°F Rise*Gallon
Capacity
ModelNumber
C
FlueSize
D
Floor toT&P
Conn.501/8583/4483/8423/16
603/4
G
Floor toHot Water
Conn.493/16
5713/16
5649
6815/16
H
Floor toHeater
Top277/16
315/8243/8243/8287/8
J
Floor toAquastat
269/16
281/234
341/16
363/4
K
Depth
E
Floor toBurner
Top
F
Floor toWaterConn.
Approx.Shipping
Weight (lbs)
†MBTUH = Thousand BTU’s/Hr.* Based on manufacturers rated recovery efficiency.Note: Does not include burner and controls.T&P Valve Included.CF - Center FlueRF - Rear Flue
Part NumberModelNumber Description**
CF-32 228-44392-01 Beckett Burner with single Aquastat @ 0.65 GPHCF-32 228-44392-03 Beckett Burner with single Aquastat @ 0.75 GPHCF-50 228-44392-03 Beckett Burner with single Aquastat @ 0.75 GPHCF-50 228-44392-05 Beckett Burner with single Aquastat @ 0.85 GPHRF-30(SX) 228-44392-07 Beckett Burner with single Aquastat @ 0.85 GPHRF-50 228-44392-09 Beckett Burner with single Aquastat @ 1.25 GPHRF-50 228-44392-11 Beckett Burner with single Aquastat @ 1.35 GPH
** All burners are 1-stage, 120V.
The Bradford White MAGNUM Series® 88/89
Everything you needto build magnumprofits
for your business.If you’re selecting the water heating equipment for an apartment complex,
restaurant, laundromat, hotel, school, manufacturing plant or any other business with aconstant high demand for hot water, the Bradford White Magnum Series of commercialwater heaters can fill all your requirements. Bradford White offers an extensive andcomprehensive selection of water heating products for commercial applications.Our commercial and industrial models, known as the MAGNUM Series, include gasand electric light-duty versions, a full compliment of high input Energy Saver units,Ultra High Efficiency unit (eF Series®), instantaneous models, booster units andstorage tanks. Each and every one is designed and built to the most exacting qualityspecifications for durability, energy-efficiency and top performance.
RightSpec® commercial sizing and specifying guideoffers many unique features and upgrades. You’ll now findit easier to use with complete specifications on the entireResidential and Magnum series line of commercial waterheaters. The program enables you to determine the correctcommercial model for any application including restaurants,apartment complexes and laundromats.
This interactive program includes a comprehensive crossreference guide that makes replacing any commercial orresidential water heater with a Bradford White model quickand easy. You simply enter the model you wish to replaceand the software will provide a Bradford White solution.
With RightSpec®, now available on the web, you’ll have thesizing solution you need in a fraction of the time it took before.
Visit Bradford White’s Interactive sizing and cross reference program at:www.bradfordwhite.com
RightSpec® - Interactive Sizing and Cross Reference
Hydrojet® Sediment Reduction System. High Efficiency, High Deliverability, Highly Effective Self-Cleaning System From Bradford White.
The lower“jet ports”direct the
flowinward to
increase the turbulence.
The Commercial Hydrojet® System incorporates up to two inlet tubes. One is atraditional top connect version and the other is a front connection. Both rely onthe patented “jetport” concept that proved extremely effective in the residentialHydrojet system. In the top connect version, patented jetports built into the inlettube are used to create turbulence inside the tank.
The turbulence helps reduce sediment build-up. Each jetport forces incoming waterout into the tank before it reaches the end or outlet of the tube. Unique jetportpositioning generates an increase in turbulence by creating accelerating watercurrent inside the tank.
Bradford White Introduces the Commercial Hydrojet® System
With the front connect Hydrojet inlet tube, only one dynamic jetport is needed to causethe extreme turbulence that is the Hydrojet systems claim to fame. This jetport isplaced on the underside of the tube centered a short distance from the end ofoutlet. Water becomes pressurized, fans out and is sprayed with force. This singlejetport acts as a flow disrupter increasing turbulence and extending the effectivescouring action across the bottom of the tank. Two alignment notches in the waterconnection end of the tube help the installer ensure that the front connect Hydrojettube is positioned for maximum performance. Both versions of the Hydrojet systemare installed at the factory free of charge providing flexibility at the time of installation.
Improved Dielectric Waterway ConnectionsWhile creating the Commercial Hydrojet models, Bradford White also developed truly dielectrically isolated waterwayconnections that counteract both water velocity erosion and electric current corrosion. The key is a plastic fitting or nippleliner that extends beyond both ends of the metal portion of the fitting. During the manufacturing process, the plastic isrolled and formed over the edges of the fitting to create a barrier eliminating dissimilar metal contact at the tankconnection and the field connection. The plastic liner also protects the fittings from flow friction or erosion as water entersand exits the tank. At the connections, the plastic liner is the only material to have contact with the high velocity water.The top and front connect Hydrojet tubes and their dielectric waterway fittings are factory installed standard equipmenton Bradford White commercial models. Just as important, all waterways, both inlets and outlets incorporate the newdesign fitting free of charge. This saves the installer time and money.
Commercial Gas Energy Saver FVIR 92/93Light Duty Water Heaters
■ Bradford White ICON System™
■ Advanced ScreenLok® TechnologyFlame Arrestor Design
■ Resettable thermal switch■ Pedestal base■ More precise temperature control
can be adjusted up to 180°F ■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System ■ 3/4" NPT Side tappings for space
heating■ 2" Non-CFC foam insulation■ Protective magnesium anode rod■ NSF construction available
■ Water Connections – 3/4" NPTfactory installed
■ T&P relief valve installed■ Low restriction brass drain valve
Photograph is of65T-65FB-3N
K
E
C
B
AHD&G
F
8"
TOP VIEW
65,00065,000
4865
50T-65FB-3N (LP)65T-65FB-3N (LP)
100122
150150
6363
4343
50531/2
57603/4
2224
164205
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
D
Floor toT&P
Conn.
B
JacketDia.
GPHRecovery
at °F Rise*
40° 100° 140°
1st HourDeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
H
Floorto Water
Conn.2628
K
Depth131/2131/2
F
Floorto SpaceHeatingReturn
50531/2
G
Floorto SpaceHeatingOutlet
13123/16
E
Floorto GasConn.
591/463
A
Floorto FlueConn.
44
C
VentDia.
Approx.Shipping
Weight (lbs)
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
* Based on manufacturer recovery rate.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “B” to “S” and “N” to “X”.For 5 year models change suffix “3” to “5”.
(LP) Propane Gas Inputs GPH Rec. 100°F Rise
50T-65FS-3X 61,000 BTU/Hr. 5965T-65FS-3X 63,000 BTU/Hr. 61
Commercial Gas Energy Saver Light Duty 94/95High Input Water Heaters
Photograph is of100T-88B-3N
■ Bradford White ICON System™
■ More precise temperature control canbe adjusted up to 180°F
■ Vitraglas® lining■ Factory installed Hydrojet 2™
Total Performance System■ NSF construction available■ Water Connections – 1" NPT (75T) and
11⁄4" (100T) factory installed truedielectric fittings
■ Side connections - 3/4" NPT tappings■ 2" Non-CFC foam insulation■ Pedestal base (75T-80 only)■ Protective magnesium anode rod■ 4" “Snap Lock” draft diverter■ T&P relief valve installed.■ Low restriction brass drain valve
BK
H G & DA
C
E F
For three years now, the CLEAReport
Water Heater Study by Clear Seas
Research has shown Bradford White to be
the water heater brand most purchased by
contractors. Just as importantly, Bradford
White came out number one again when
contractors were asked what brand they
most often recommended.*
Here’s Why• American Made
• Employee Owned
• Wholesale Only
• Support for the Trade
• Superior Features
• Eco-Friendly Solutions
• Constant Innovation
• Technology That Works
• Always a Premium Product at the Best Possible Price
The Brand Most Purchased by Contractors
For three years now, the CLEAReport
Water Heater Study by Clear Seas
Research has shown Bradford White to be
the water heater brand most purchased by
contractors. Just as importantly, Bradford
White came out number one again when
contractors were asked what brand they
most often recommended.*
The PerfectChoice
The PerfectChoice
*Ranking is based on the 2008 CLEAReport by Clear Seas Research. Please visit www.clearseasresearch.com for additional information. ©2009, Bradford White Corporation. All rights reserved.
MAKE MORE MONEYON WATER HEATER INSTALLATIONS
*This warranty upgrade includes all of the associated suffixes to the base model numbers above. The UpgradeKit also applies to any corresponding new model numbers created due to the new regulatory changes.www.bradfordwhite.com
Now you have anincredible opportunity to increase your profits
while providing an addedvalue to the homeowner.
Instantly upgrade a waterheater to 10 years duringthe installation – no anode
rod or any othercomponents needed.
Available on selected Bradford Whiteresidential water heaters from your
Bradford White distributor.
LEVEL 1
GAS*M-I-30TM-I-30SM-I-303TM-I-40TM-I-403SM-I-404TM-I-503M-I-50L
M-I-504SM-I-60TM-4-30TM-4-403SM-4-40TM-4-503M-4-60TU1-30TU1-30S
U1-403SU1-40TU1-404TU1-503U1-50LU1-504SU1-60TU4-30TU4-40T
U4-403SU4-503U4-60T
ELECTRIC*M-1-20LM-1-30LM-1-40LM-1-50LM-2-30LM-2-40LM-2-50LM-1-6U
M-1-10UM-1-12UM-1-12UTM-1-15UM-1-20UM-2-30UM-2-30RM-2-40SM-2-40T
M-2-50SM-2-50TM-2-65RM-1-WH6UM-1-WH12UM-1-WH20LM-2-WH30L
LEVEL 2
GAS*M-I-75SM-I-100TM-1-TW40SM-1-TW50SM-1-TW60TM-2-TW50TM-2-TW65T
M-2-TW75T PDX1-40SPDX1-50SPDX2-50TPDX2-65TPDX2-75TD-4-403SD-4-504S
DS-1-40SDS-1-50SDH-1-504TDH-1-65TDH-1-75SM-1-XR403SM-2-XR504TM-2-XR65T
M-2-XR75SU1-XR-403SU2-XR-504TU2-XR-65TU1-TW-40SU1-TW-50SU1-TW-60TU2-TW-50T
U2-TW-65TPE-4-403SPE-4-40TPE-4-503PE-2-XR504T
ELECTRIC*M-2-80RM-2-120RM-2-HE40SM-2-HE50SM-2-HE65RM-2-HE80R
Bradford White’s innovativeline of water heaters now offerENERGY STAR® qualifiedmodels for Atmospheric Vent,Power Vent, Ultra Low NOx
Power Vent and Tankless applications.
Residential High-EfficiencyGas Storage Water Heaters• Minimum Energy Factor (EF) of 0.67
as of September 1st, 2010• Minimum First Hour Rating (FHR) of
67 gallons• Annual energy savings of 14%*
Whole Home Gas TanklessWater Heaters• Minimum Energy Factor
(EF) of 0.82• Minimum gallons per minute
(GPM) of 2.5 at a 77˚F rise• Annual energy saving up to 29%*
QUALIFYING MODELS
Bradford White customers can expect many advantages from our ENERGY STAR® modelsConsumers recognize the ENERGY STAR® label as representing energy savingproducts that result in a “greener” home • The tools to help sell a more energy efficientproduct • More extensive product offering than retail stores • Certain utility companieswill issue rebates for ENERGY STAR® products*Based on the National Gas Average Energy Cost and a comparison to a conventional gas water heater with an EF rating of 0.58.
This incredible selection of water heateraccessories allows you to offer yourcustomers more hot water for their money,higher efficiency, greater energy savings,leak protection and full 7-dayprogrammability. Build your business bymaking a great water heater even better!
• Integrated Mixing Device•Accessory Module•Leak Detection Sensor•Rubber Dam• Inlet Shut-off Valve•Energy Saving
Programmable Control
Introducing the Bradford WhiteICON System™ AccessoryPackages.
Bradford White’s eF Series® water heaters have a ThermalEfficiency rating as high as 99.1%. eF Series® models are theonly water heaters in their class with unbalanced direct ventingcapabilities — up to 120 equivalent feet using 3" ABS, PVC orCPVC piping and 170 equivalent feet using 4" ABS, PVC orCPVC piping. They use Stainless Steel Baffles, Glass Lined FlueTubes, a Highly Durable Igniter and a Self CompensatingCombustion System to put them above the competition. Add Quiet Operation and Low NOx compliance and you cansee why eF Series® units are the leaders in energy efficientcommercial water heating.
76,00085,000
75100
75T-80B-3N (LP)100T-88B-3N (LP)
130155
184206
7482
5359
513/4595/16
605/86911/16
26281/4
247420
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
D
Floor toT&P
Conn.
B
JacketDia.
GPHRecovery
at °F Rise*
40° 100° 140°
1st HourDeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
H
Floorto Water
Conn.283/8321/4
K
Depth165/8175/8
F
Floorto SpaceHeating
Inlet513/4505/8
G
Floorto SpaceHeatingOutlet
15155/8
E
Floorto GasConn.
623/86811/16
A
Floorto FlueConn.
44
C
VentDia.
Approx.Shipping
Weight (lbs)
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
* Based on manufacturer recovery rate.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “B” to “S” and “N” to “X”.For 5 year models change suffix “3” to “5”.
(LP) Propane Gas Inputs GPH Rec. 100°F Rise
75T-80S-3X 76,000 BTU/Hr. 74100T-88S-3X 88,000 BTU/Hr. 85
Commercial Gas Energy Saver Light Duty 96/97High Performance Water Heater
Photograph is of25X-78B-3N
HJ G & D A
KB
C
E F
PLUG TYPEANODE
■ High input combustion system■ Integrated Mixing Device■ Helical fin flue■ Vitraglas® lining■ Factory installed Hydrojet®
Total Performance System■ Water Connections – 3/4" NPT factory
installed true dielectric fittings■ Non-CFC foam insulation■ Two protective magnesium anode rods■ 4" “Snap Lock” draft diverter■ 3/4" NPT side tappings for space heating■ Fully automatic controls■ T&P relief valve installed■ Low restriction brass drain valve
78,00080,000
2555
25X-78B-3N55X-80B-3N
7678
581/2595/8
1822
44
1413/16
1413/16
150200
157/16
157/16
5050
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed 82% Recovery Efficiency
A
Floorto FlueConn.
B
JacketDia.
GPHRecovery
100°F Rise*Input
BTU/Hr.Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toSpace
HeatingReturn
5050
G
Floor toSpace
HeatingOutlet
545/856
H
Floorto Heater
Top585/860
J
Floorto WaterConn.†
22261/4
K
Depth
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “B” to “S” and “N” to “X”.†Dimension to top of installed mixing device.Gas connections are 1⁄2".
Integrated Mixing Device
ModelNumber
XDistanceBetweenCenters
in.
ZHeight
toCenterof Pipe
in.
YDepth ofMixingDevice
in.
25X-78B-3N55X-80B-3N
88
66
21/2
21/2
(LP) Propane Gas Inputs GPH Rec. 100°F Rise
25X-78S-3X 76,000 BTU/Hr. 7455X-80S-3X 78,000 BTU/Hr. 76 X
Z
Y
Commercial Gas Energy Saver Light Duty 98/99TTW® High Performance Water Heaters
■ High input combustion system■ Integrated Mixing Device■ Helical fin flue■ Vitraglas® lining■ Factory installed Hydrojet®
Total Performance System■ Water Connections – 3/4" NPT factory installed
true dielectric fittings■ Non-CFC foam insulation■ Two protective magnesium anode rods■ Powerful blower motor■ Honeywell self diagnostic electronic gas control■ Flammable vapor sensor (not FVIR)■ Spark-to-pilot ignition■ Horizontal and vertical venting■ 3/4" NPT side tappings for space heating■ T&P relief valve installed■ Low restriction brass drain valve Photograph is of
TW-55X-78B3N
E F
H D & GJ
A
C
KB
76,00078,000
2555
TW-25X-76B3NTW-55X-78B3N
155200
7476
625/8633/4
1822
3 or 43 or 4
111/2111/2
170215
133/8133/8
4848
Power Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed82% Recovery Efficiency
A
Floorto VentConn.
B
JacketDia.
GPHRecovery
100°F Rise*
1st HourDeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
D
Floorto T&PConn.
E
Floorto GasConn.
F
Floor toSpace Heating
Return
4848
G
Floor toSpace Heating
Outlet
527/854
H
Floorto Heater
Top
567/858
J
Floorto WaterConn.†
253/8273/8
K
Depth
Approx.Shipping
Weight (lbs)
All propane models feature a Titanium Stabilized Stainless Steel propane burner.For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.†Dimension to top of installed mixing device.TW-25X has 2" of insulation.TW-55X has 1" of insulation.Gas connections are 1⁄2".
Integrated Mixing Device
ModelNumber
XDistanceBetweenCenters
in.
ZHeight
toCenterof Pipe
in.
YDepth ofMixingDevice
in.
TW-25X-76B3NTW-55X-78B3N
88
66
21/2
21/2
(LP) Propane Gas Inputs GPH Rec. 100°F Rise
TW-25X-76B3N 76,000 BTU/Hr. 74TW-55X-78B3N 78,000 BTU/Hr. 76
†Consult I&O manual when using four or more elbows.Subtract 5ft. for each additional 90° elbow.
3"Vent Pipe
4"Vent PipeTW-55X-78B3N
TW-25X-76B3N
†60 ft.7 ft.55 ft.50 ft.45 ft.
†180 ft.15 ft.175 ft.170 ft.165 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows 3
X
Z
Y
Commercial Gas Energy Saver FVIR 100/101Light Duty Through-The-Wall Water Heaters
Photograph is ofTW4-50S-67FB-3N
The TTW®4 FVIR Defender Safety System®
Models Feature (Except TW4-75S):■ Advanced ScreenLok®
Technology FlameArrestor Design
■ Flammable vapor sensorAll TTW®4 Models Feature:■ Powerful blower motor■ Honeywell self diagnostic
electronic gas control■ More precise temperature
control can be adjusted up to180°F
■ Spark to pilot ignition system■ Horizontal and vertical venting■ Vitraglas® Lining
■ Factory installed Hydrojet®
Total Performance System■ Water Connections 3/4" NPT
factory installed true dielectricfittings
■ Pedestal base■ 3/4" NPT side connections for
space heating■ 2" Non-CFC foam insulation■ Protective magnesium
anode rod■ Factory installed heat traps■ T&P relief valve installed■ Low restriction brass drain
valve
K
C
AJ H
E F
B
D & G
67,00070,00076,000
486575
TW4-50S-67FB-3N (LP)TW4-65S-70FB-3N (LP)TW4-75S-76B-3N (LP)
108126140
162170184
656874
464957
657/869
693/4
333
222426
188222277
Power Vented Energy Saver ModelsDIMENSIONS IN INCHES
A
Floorto VentConn.
B
JacketDia.
GPHRecovery
at °F Rise*
40° 100° 140°
1st HourDeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentDia.
501/8531/253
D
Floorto T&PConn.
131/2131/2173/4
F
Floorto SpaceHeatingReturn
113/4113/415
E
Floorto GasConn.
501/8531/253
G
Floorto SpaceHeatingOutlet
263/4283/431
K
Depth573/4603/4611/2
J
Floorto
WaterConn.
563/8591/2601/4
H
Floorto Top
ofHeater
Approx.Shipping
Weight (lbs)
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
* Based on manufacturer recovery rate.All propane models feature a Titanium Stainless Steel propane burner.For propane (LP) models change suffix “B” to “S” and “N” to “X”.For 5 year models change suffix “3” to “5”.110 V.A.C. required for power venting/110 V.A.C. 60 Hz 3.1 Amperes.NSF construction available.
(LP) Propane Gas Inputs GPH Rec. 100°F Rise
TW4-50S-67FS-3X 60,000 BTU/Hr. 58TW4-65S-70FS-3X 63,000 BTU/Hr. 61TW4-75S-76S-3X 75,500 BTU/Hr. 73
Subtract 5ft. for each additional 90° elbow†Consult the I&O manual when using four or more elbows.**TW4-75S-76 Max. 3" vent length is 50ft.
3"Vent Pipe
4"Vent Pipe
TW4-65S-70FTW4-75S-76
TW4-50S-67F
60 ft. 7 ft.55 ft.50 ft.45 ft.
** 180 ft. 15 ft.175 ft.170 ft.165 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
Commercial Gas Energy Saver Light Duty 102/103Ultra Low NOx Water Heater
Photograph is ofU-50T-55FR-3N
K
B
8"
E
C
A
F
D&GH
■ Defender® combustion chamber■ Ultra low NOx burner with primary
and secondary air distribution devices■ Vitraglas® Lining■ Factory Installed Hydrojet® Total
Performance System■ Honeywell self diagnostic gas control■ Millivolt powered control with built-in
piezo igniter■ No electricity required■ Digital thermal sensor and resettable
thermal switch■ Pedestal base■ Water Connections 3/4" NPT factory
installed true dielectric fittings
■ 3/4" NPT side connections■ 2" Non-CFC Foam Insulation■ Factory installed heat traps■ Protective magnesium anode rod■ T&P relief valve included ■ Low restriction brass drain valve■ Meets C.E.C Title 24, SCAQMD
Rule 1121 (10ng/J)
(U1-XR has 1")
55,00055,000
4865
U-50T-55FR-3NU-65T-55FR-3N
89114
5353
591/463
2224
2628
50531/2
174213
131/2131/2
57603/4
Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
A
Floorto
FlueConn.
B
JacketDia.
GPHRecovery
100°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
K
Depth
H
Floorto
WaterConn.
G
Floorto SpaceHeatingOutlet
F
Floor toSpace
HeatingReturn
115/8115/8
E
Floorto
GasConn.
44
C
VentSize
50531/2
D
Floorto
T&PConn.
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.Available in natural gas only.For 10 year models, change suffix from “6” to “10”.All models meet SCAQMD rule 1121 requirement of 10ng/J, or less, NOx emissions.**First Hour Delivery Rating is based on the March 2010 AHRI Directory.
Commercial Gas Energy Saver Light Duty 104/105TTW® Ultra Low NOx Water Heater
C
A
J H
E F
B
D & G
K
■ Defender® combustion chamber■ Ultra low NOx burner with primary
and secondary air distributiondevices
■ Vitraglas® Lining■ Factory Installed Hydrojet®2™
Total Performance System■ Honeywell self diagnostic gas control■ Flammable vapor sensor■ Powerful blower motor■ Horizontal and vertical venting■ Sight window■ Pedestal base■ Water Connections 3/4" NPT factory
installed true dielectric fittings
■ 2" Non-CFC Foam Insulation■ Factory installed heat traps■ Protective magnesium anode rod■ T&P relief valve included ■ Low restriction brass drain valve■ Meets SCAQMD Rule 1121 (10ng/J)
Photograph is ofU-TW4-50S-60FR-3N
60,00060,000
4865
U-TW4-50S-60FR-3NU-TW4-65S-60FR-3N
98114
5858
657/869
2224
263/4283/4
501/8531/2
184215
131/2131/2
573/4603/4
Power Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed78% Recovery Efficiency
A
Floorto
VentConn.
B
JacketDia.
GPHRecovery
100°F Rise*
1st Hour**DeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
K
Depth
J
Floorto
WaterConn.
563/8591/2
H
Floorto
Top ofHeater
G
Floorto SpaceHeatingOutlet
F
Floor toSpace
HeatingReturn
113/4113/4
E
Floorto
GasConn.
33
C
VentSize
501/8531/2
D
Floorto
T&PConn.
Approx.Shipping
Weight (lbs)
Available in Natural Gas only.*Based on manufacturers rated recovery efficiency.For 10 year models, change suffix from “6” to “10”.110 V.A.C. Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes. **First Hour Delivery Rating is based on the March 2010 AHRI Directory.
†Consult I&O manual when using four or more elbows.Subtract 5ft. for each additional 90° elbow.
3"Vent Pipe
4"Vent PipeU-TW4-65
U-TW4-50
†60 ft. 7 ft.
55 ft.50 ft.45 ft.
†180 ft. 15 ft.175 ft.170 ft.165 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
Commercial Gas Energy Saver FVIR 106/107Light Duty Power Direct Vent Water Heaters
■ Closed combustion ventingsystem
■ Flammable vapor sensor ■ Powerful blower motor■ Honeywell self diagnostic
electronic gas control■ More precise temperature
control can be adjusted upto 180°F
■ Spark-to-pilot ignitionsystem
■ Horizontal and verticalventing
■ Vitraglas® lining■ Factory installed Hydrojet®
Total Performance System
■ Optional concentric ventkit termination
■ 3/4" NPT side connectionsfor space heating
■ Water Connections – 3/4"NPT factory installed truedielectric fittings
■ 2" Non-CFC foaminsulation
■ Protective magnesiumanode rod
■ Factory installed heat traps■ T&P relief valve installed■ Low restriction brass drain
valvePhotograph is of
PDX-50S-60FB-3N
AJ B
D & G
H
E F
C
K
60,00065,00070,000
486575
PDX-50S-60FB-3N(LP)PDX-65S-65FB-3N(LP)PDX-75S-70FB-3N(LP)
105120140
145158170
586368
424548
68711/471
222426
303330375
Power Direct Vent Energy Saver ModelsDIMENSIONS IN INCHES
A
Floorto
ExhaustOutlet
521/4555/8541/4
521/4555/8541/4
D
Floorto
T&PConn.
135/8135/8161/4
E
Floorto
GasConn.
153/4153/419
F
Floor toSpace
HeatingReturn
G
Floor toSpace
HeatingSupply
67691/2693/8
H
FloortoAir
Intake593/463
623/4
J
Floorto
WaterConn.
32321/836
K
Depth91/491/4
1111/16
Ct. LineDistance
From Intaketo Exhaust
B
JacketDia.
GPHRecovery
at °F Rise*
40° 100° 140°
1st HourDeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
333
C
VentSize
Approx.Shipping
Weight (lbs)
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed80% Recovery Efficiency
(LP) Propane Gas Inputs GPH Rec. 100°F Rise
PDX-50S-60FS-3X 60,000 BTU/Hr. 58PDX-65S-65FS-3X 60,000 BTU/Hr. 58PDX-75S-70FS-3X 65,000 BTU/Hr. 63
Subtract 5ft. for each additional 90° elbow.†Consult I&O manual when using four or more elbows.
* Based on manufacturer recovery rate.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “B” to “S” and “N” to “X”.For 5 year models change suffix “3” to “5”.110 V.A.C. required for power venting/110 V.A.C. 60 Hz 3.1 Amperes.NSF construction available.
3" Vent PipePDX-50SPDX-65S
60 ft.60 ft.7 ft.55 ft.50 ft.45 ft.
Max. Intake LengthMax. Exhaust LengthMin. Vent LengthNumber 1of 290° Elbows† 3
4" Vent PipePDX-50SPDX-65S
100 ft.100 ft.7 ft.95 ft.90 ft.85 ft.
PDX-75S
50 ft.50 ft.7 ft.45 ft.40 ft.35 ft.
PDX-75S
90 ft.90 ft.7 ft.85 ft.80 ft.75 ft.
Max. Intake LengthMax. Exhaust LengthMin. Vent LengthNumber 1of 290° Elbows† 3
Intake/CombustionAir Rain Cap
VentExhaust
46 3/4"
Optional 3" Concentric Vent Terminal Kit
P/N 239-44069-01
Commercial Gas Energy Saver FVIR 108/109Light Duty Direct Vent Water Heaters
Photograph is ofDH-50T-50FB-3N
■ Bradford White ICON System™
■ Reinforced seals■ Closed combustion■ Co-axial Vent System-outer pipe takes
air in from the outside. Inner pipe ventscombustion gases directly back to theoutside
■ More precise temperature controlcan be adjusted up to 180°F
■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Water Connections – 3/4" NPT factory
installed true dielectric fittings■ 3/4" NPT side tappings for space
heating■ 1" Non-CFC foam insulation■ Co-axial rotational venting
■ Protective magnesium anode rod■ Factory installed heat traps■ No electrical power necessary■ Optional vent kit allows for up
to 8 foot (2.4 meters)extentions
■ T&P relief valve included■ Low restriction brass drain valve
Flexible Vent Kit(Side View)
Telescoping Solid Vent Kit(Side View)
C
AB
F
E
H
73/4"
KD&G
J
C
A
E
73/4"
K
50,00055,00060,000
486575
DH-50T-50FB-3N (LP)DH-65T-55FB-3N (LP)DH-75T-60FB-3N (LP)
8197112
118130132
475257
344751
583/46259
593/46360
2022
241/2
197243281
Direct Vent Energy Saver ModelsDIMENSIONS IN INCHES
H
Floorto
HeaterTop
B
JacketDia.
GPHRecovery
at °F Rise*
40° 100° 140°
1st HourDeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
J
Floor toTop
WaterConn.
301/43435
K
Depth521/45652
D
Floorto T&PValve
153/4153/4161/2
F
Floor toSpace
HeatingReturn
521/45652
G
Floorto SpaceHeatingOutlet
151/4151/4151/4
E
Floorto GasConn.
751/4781/4751/2
A
Floor toCenterLine
of Vent4 I.D., 6 O.D.4 I.D., 6 O.D.4 I.D., 6 O.D.
C
VentDia.
Approx.ShippingWeight
(lbs)
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed79% Recovery Efficiency
* Based on manufacturer recovery rate.All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “B” to “S” and “N” to “X”.For 5 year models change suffix “3” to “5”.
Horizontal Installation OnlyThe Standard Vent Kit (239-42979-00) is ordered and shipped separately. The components for the standard vent kit are as follows:4" vent tube, 6” Air Intake Tube, Vent Terminal, Inner Wall Term Mounting Flange, Outer Wall Term. Mounting Flange, Vent TerminalHardware, RTV Silicone Sealant, 4” Vent Elbow and a 6” Air Intake Elbow. The Vent Tube and Air Intake Tube provided in the standard vent kit telescopes from 133⁄4" to 2311⁄16".NSF Construction available.
(LP) Propane Gas Inputs GPH Rec. 100°F Rise
DH-50T-50FS-3X 48,000 BTU/Hr. 45DH-65T-55FS-3X 55,000 BTU/Hr. 52DH-75T-60FS-3X 57,000 BTU/Hr. 53
Telescoping Solid Vent Kit (239-47811-00) or Flexible Vent Kit (239-47813-00) can beordered and shipped with water heater, or ordered and shipped separately. For vent kitcomponents and venting instructions, refer to Installation and Operating Manual.
Optional vent kit : Kit “F” Telescopes from 43⁄4" to 511⁄16" Part No. 239-42516-00Kit “G” Telescopes from 61⁄2" to 93⁄16" Part No. 239-42517-00Kit “H” Telescopes from 133⁄4" to 2311⁄16" Part No. 239-42514-00Kit “I” Telescopes from 4913⁄16" to 9513⁄16" Part No. 239-42512-00
Horizontal Vent Termination Only.
Commercial Gas Energy Saver 110/111Electronic Ignition Water Heaters
■ Honeywell integrated control—Proven design combinestemperature control, diagnosticcodes and system ignition functionsinto a single control board with adigital LCD display
■ Operation mode■ Service mode■ Electronic ignition■ Automatic flue damper
■ Factory installed Hydrojet® SedimentReduction System
■ Vitraglas® Lining■ Non-CFC foam insulation■ Water connections—Factory
installed true dielectric waterwayfittings
■ Hand hole cleanout■ Automatic re-set E.C.O.
■ Magnesium anode rods■ Sanitizing Capability■ ASME code available on all models
above 200,000 BTU/Hr.■ NSF construction available■ Low NOx construction available■ North Carolina code compliant■ T&P relief valve installed■ Low restriction brass drain valve
Commercial Gas Burner■ Orifice alignment bracket for true injection■ Stainless steel pilot shield■ Stainless steel burner rack and mounting
bracket■ Aluminized steel burner tubes with
adjustable air shutter (Stainless steelburner tubes available)
■ Opposing lance formed burner ports yieldconsistent performance to stabilize burnerflame and promote better air gas mixture
■ Standard on both “T” and “L” CommercialEnergy Saver models
Photograph is ofD-80T-180-3N
Optional Power Vent Kits – available for inputsfrom 125,000 to 505,000.BTU Input Range Kit Number125,000 to 290,000 BTU’s: 239-81764-00300,000 to 399,999 BTU’s: 239-81766-00425,000 to 505,000 BTU’s: 239-82148-00
Typical ApplicationsB
A
H
E
C
F
D
B
J
H
A
E
C
F
D
B
A
H
E
C
F
D
D-38T-155 D-75T-(125, 160)D-80T-(180, 199,250)D-100T-(199, 250)D-100S-(199, 250)D-100L-(199, 250, 270, 300)
D-75T-300D-65T-(370, 399)D-80T-(425, 505)D-80L-(399, 450, 505)
Commercial Gas Energy Saver 112/113Electronic Ignition Water Heaters
155,000125,000160,000180,000199,999250,000199,999250,000300,000370,000399,999425,000505,000
38757580808098987565658080
D-38T-155-3N+D-75T-125-3ND-75T-160-3N(LP)D-80T-180-3ND-80T-199-3ND-80T-250-3N(A)(LP)D-100T-199-3ND-100T-250-3N(A)(LP)D-75T-300-3N(A)D-65T-370-3N(A)D-65T-399-3N(A)**D-80T-425-3N(A)D-80T-505-3N(A)
177174208231250298263311344405424468527
37630338943648560648560672789797010301178
150121155175194242194242291359388412471
10786111124139173139173208256277294337
43651/8651/8643/8643/8643/8751/2751/2641/2641/2641/2751/2751/2
656666667881010
281/4281/4281/4281/4281/4281/4281/4281/4281/4281/4281/4281/4281/4
–––––
590–
690645720720800800
Electronic Ignition ModelsDIMENSIONS IN INCHES
These models meet or exceed both Recovery Efficiencyand Standby Loss Requirements of ASHRAE 90.1b (Current Edition).
H
Floorto Top
ofHeater
B
JacketDia.
GPHRecovery
at °F Rise*
Approx.Shipping
Weight (lbs)
40° 100° 140°
1st HourDeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentDia.
–671/8671/8661/4661/4661/4771/4771/4
–––––
J
Floorto TopWaterConn.
343/4541/2541/25656566767
541/4541/4541/4641/4641/4
D
FrontHot
WaterConn.
45/843/443/443/443/443/443/443/4101/2101/2101/2101/2101/2
E
Floorto GasConn.
51721/4721/4723/8723/8723/8833/8833/8741/4731/4731/4825/8825/8
A
TopVent
Height193/83434
191/2191/2191/2191/2191/22929292929
F
FrontCold
WaterConn. Std. ASME
11/211/211/211/211/211/211/211/211/211/211/211/211/2
WaterConn.
3/43/43/43/43/43/43/43/43/4
1(N)
438520520540540540610610590665665750750
GasConn.Dia.
3/43/43/43/43/41
3/4111111
ReliefValveOpen.
NATURAL GAS AND LIQUID PROPANE GAS MODELS
1(N)3/4 (LP)
1(N)3/4 (LP)
1(N)3/4 (LP)
199,999250,000199,999250,000270,000300,000399,999450,000505,000
100100100100100100808080
D-100S-199-3ND-100S-250-3N(A)D-100L-199-3ND-100L-250-3N(A)D-100L-270-3N(A)**D-100L-300-3N(A)D-80L-399-3N(A)(LP)D-80L-450-3N(A)(LP)D-80L-505-3N(A)(LP)
264312264312332361444492545
48560648560665572797010911224
94242194242262291388436489
139173139173187208277312350
677/8677/865656565
641/2641/2641/2
66666781010
281/4281/4301/4301/4301/4301/4301/4301/4301/4
–702–
765765765835835835
Electronic Ignition ModelsDIMENSIONS IN INCHES
These models meet or exceed both Recovery Efficiencyand Standby Loss Requirements of ASHRAE 90.1b (Current Edition).
H
Floorto Top
ofHeater
B
JacketDia.
GPHRecovery
at °F Rise*
Approx.Shipping
Weight (lbs)
40° 100° 140°
1st HourDeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentDia.
707067676767–––
J
Floorto TopWaterConn.
603/8603/8563/8563/8563/8563/8511/2511/2511/2
D
FrontHot
WaterConn.
45/845/841/241/241/241/2101/2101/2101/2
E
Floorto GasConn.
761/2761/2757575
755/8713/8713/8713/8
A
TopVent
Height203/4203/4231/2231/2231/2231/2231/2231/2231/2
F
FrontCold
WaterConn. Std. ASME
WaterConn.
3/43/43/43/43/43/4
667667725725725725800800800
GasConn.Dia.
3/41
3/4111111
ReliefValveOpen.
NATURAL GAS AND LIQUID PROPANE GAS MODELS
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
1(N)3/4 (LP)
1(N)3/4 (LP)
1(N)3/4 (LP)
(A) = ASME Code Available(F) = Front Water Connection(R) = Rear Water Connection(T) = Top Water Connection** = Available in Natural Gas Only + = Fiberglass Insulation
For (LP) Propane Gas models change suffix “N”to “X”.
* Recoveries and First Hour Delivery Rating are based on ThermalEfficiencies ranging up to 80%. Low NOx models are not available for inputs over 399,999For Low NOx compliance to meet SCAQMD requirements place an “E”following the BTU input identifier of the model number.Example: D-75T-125E-3NAmperage Draw = .5 for damper models/less than 4 for induced draft models.Power Vent Kits – available for inputs from 125,000 to 505,000.
(LP) Propane Gas Inputs 1st Hr. Del. GPH Rec. Rating 40° 100° 140°
D-75T-160-3X 155,000 BTU/Hr. 199 376 150 107D-80T-250-3X 235,000 BTU/Hr. 284 570 228 163D-100T-250-3X 235,000 BTU/Hr. 297 570 228 163D-80L-399-3X 375,000 BTU/Hr. 420 909 364 260D-80L-450-3X 425,000 BTU/Hr. 468 1030 412 294D-80L-505-3X 475,000 BTU/Hr. 517 1152 461 329
Commercial Gas Energy Saver 114/115Millivolt Water Heaters
■ ASME code available on all models above 200,000 BTU/Hr.■ Continuous pilot-ignition■ Piezo Igniter - easy and quick lighting by the pilot burner by push button■ Millivolt controls■ Flue damper■ Vitraglas® lining■ Factory installed Hydrojet® Sediment Reduction System■ Factory installed dielectric fittings■ No electricity required■ Non-CFC foam insulation■ Hand hole cleanout (standard)■ NSF construction available■ T&P relief valve installed■ Low restriction brass drain valve■ 3 year limited tank warranty
Photograph is ofDM-75T-125-3N
Water ConnectionsTop and FrontDM80T180, 199, 250DM100T199, 250DM75T125, 160Top Front, RearDM100L199, 250, 270DM100S199, 250
Water ConnectionsFront and RearDM38T155
C
B
F
J
D
E
COLD
HOT
T & P
A
H
CLEANOUT
H
C
B
F
D
E
HOT
T & P
A
J
COLD CLEANOUT
Commercial Gas Energy Saver 116/117Millivolt Water Heaters
155,000125,000160,000180,000199,999250,000199,999250,000199,999250,000270,000199,999250,000
3875758080809898100100100100100
DM-38T-155-3NDM-75T-125-3NDM-75T-160-3NDM-80T-180-3NDM-80T-199-3NDM-80T-250-3N(A)(LP)DM-100T-199-3NDM-100T-250-3N(A)(LP)DM-100L-199-3NDM-100L-250-3N(A)DM-100L-270-3N(A)**DM-100S-199-3NDM-100S-250-3N(A)
174174208231250298263311264312332264312
376303389436485606485606485606655485606
150121155175194242194242194242262194242
10786111124139173139173139173187139173
436565
641/2641/2641/2751/2751/2656565
727/8727/8
6566666666666
281/4281/4281/4281/4281/4281/4281/4281/4301/4301/4301/4281/4281/4
–––––
590–
690–
765765–
702
Millivolt ModelsDIMENSIONS IN INCHES
These models meet or exceed both Recovery Efficiencyand Standby Loss Requirements of ASHRAE 90.1b (Current Edition).
H
Floorto Top
ofHeater
B
JacketDia.
GPHRecovery
at °F Rise*
Approx.Shipping
Weight (lbs)
40° 100° 140°
1st HourDeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentDia.
–671/8671/8661/4661/4661/4771/4771/46767677575
J
Floorto TopWaterConn.
341/2541/2541/25656566767
561/2561/2561/2601/2601/2
D
R/FHot
WaterConn.
45/843/443/443/443/443/443/443/441/241/241/241/241/2
E
Floorto GasConn.
51721/4721/4723/8723/8723/8833/8833/8757575
763/4763/4
A
TopVent
Height193/83434
191/2191/2191/2191/2191/2231/2231/2231/2203/4203/4
F
R/FCold
WaterConn. Std. ASME
11/211/211/211/211/211/211/211/2
WaterConn.
3/43/43/43/43/43/43/43/43/43/43/43/43/4
3/43/43/43/43/41
3/41
3/411
3/41
438520520540540540610610725725725667667
GasConn.Dia.
ReliefValveOpen.
NATURAL GAS AND LIQUID PROPANE GAS MODELS
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
(A) = ASME Code Available(F) = Front Water Connection(R) = Rear Water Connection(T) = Top Water Connection** = Available in Natural Gas Only For Propane Gas models change suffix “N” to “X”.
(LP) Propane Gas Inputs 1st Hr. Del. GPH Rec. Rating 40° 100° 140°
DM-80T-250-3X 235,000 BTU/Hr. 284 570 228 163DM-100T-250-3X 235,000 BTU/Hr. 284 570 228 163
For LowNOx compliance to meet SCAQMD requirements, place an “E” following the BTU Input identifier of the model number. Example: DM-75T-125E-3N* Recoveries and First Hour Delivery Rating are based on Thermal Efficiencies of 80%.
Commercial Gas Energy Saver 118/119Power Direct Vent Water Heater
■ Honeywell integratedcontrol—Provendesign combinestemperature control,diagnostic codes andsystem ignitionfunctions into a singlecontrol board with adigital LCD display
■ Operation mode■ Service mode■ Electronic ignition■ Automatic blower
motor■ Factory installed
Hydrojet® SedimentReduction System
■ Co-axial vent
■ Vitraglas® lining■ Automatic re-set E.C.O.■ Non-CFC foam
insulation■ Protective magnesium
anode rods■ Hand hole cleanout■ Sanitizing capability■ NSF construction
available■ Low NOx construction
available■ ASME code available■ T&P relief valve
installed■ Low restriction brass
drain valve
D
J
A
C
E
H
B
K
Photograph is ofPDV-80T-300-3NA
300,000360,000
80100
PDV-80T-300-3N(A)PDV-100T-360-3N(A)
347419
728873
291349
208249
633/4723/4
653/4743/4
281/4281/4
Power Direct Vent Energy Saver ModelsDIMENSIONS IN INCHES
These models meet or exceed bothRecovery Efficiency and Standby Loss Requirements of ASHRAE 90.1b (Current Edition).
H
Floorto
HeaterTop
B
JacketDia.
GPHRecovery
at °F Rise*
40° 100° 140°
1st HourDeliveryRating
Nat. &LP
InputBTU/Hr.
Gal.Cap.
ModelNumber
J
Floorto TopWaterConn.
445/8445/8
K
Depth135/8135/8
C
Floorto
GasConn.
513/8603/8
D
Floorto HotWaterConn.
207/8207/8
E
Floorto ColdWaterConn.
695/8785/8
A
TopVent
Height11
ReliefValveOpen
3/43/4
GasConn.Dia.
WaterConn.
NATURAL GAS AND LIQUID PROPANE GAS MODELS
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
740815
Approx.Shipping
Weight (lbs)
Std. ASME665735
(A) = ASME Code Available(F) = Front Water Connection(R) = Rear Water Connection(T) = Top Water ConnectionFor Propane Gas models change suffix “N” to “X”.
* Recoveries and First Hour Delivery Rating are based on Thermal Efficiencies of 80%. For vertical venting please consult factory for optional vent components.
For LowNOx compliance to meet SCAQMD requirements, place an “E” following theBTU Input identifier of the model number.
(E) Low NOX Burners 1st Hr. Del. GPH Rec. Rating 40° 100° 140°
PDV-80T-300E-3N(A) 280,000 BTU/Hr. 328 679 272 194PDV-100T-360E-3N(A) 335,000 BTU/Hr. 395 812 325 232
**Note: The standard vent kit (p/n 243-41769-01) shipped with the heater, but in a separatecarton includes: horizontal vent terminal, an elbow, condensate tee, vent connector clamps,and two 39" (990mm) straight sections of co-axial vent pipe. Can be cut for installation.Optional vent kits are available and will allow for extensions up to 21 feet. For further detailsplease reference the installation instructions.
Commercial Gas Energy Saver Power Direct Vent 120/121with Independent Vent System Water Heaters
■ Honeywell integratedcontrol—Proven designcombines temperaturecontrol, diagnostic codesand system ignitionfunctions into a singlecontrol board with adigital LCD display
■ Operation mode■ Service mode■ Automatic blower motor■ Electronic ignition■ Factory installed Hydrojet®
2™ Sediment ReductionSystem
■ Independent vent system■ Vitraglas® lining■ Automatic re-set E.C.O.
■ Non-CFC foam insulation■ Water connections—11⁄2"
NPT top and front, 2" NPTrear factory installed truedielectric fittings
■ Protective magnesiumanode rods
■ Hand hole cleanout■ Sanitizing capability■ NSF construction available■ ASME construction
available on 250,000 BTUmodel (73.2 kW)
■ Low NOx constructionavailable
■ T&P relief valve installed■ Low restriction brass
drain valve
F
GA
H
ED
B
C
K
Photograph is ofPDV-80S-150-3N
150,000199,999250,000150,000199,999250,000
808080100100100
PDV-80S-150-3NPDV-80S-200-3NPDV-80S-250-3N(A)(LP)PDV-100S-150-3NPDV-100S-200-3NPDV-100S-250-3N(A)(LP)
204253301219266312
364485606364485606
145194242145194242
104139173104139173
637/8637/8637/8727/8727/8727/8
334334
281/4281/4281/4281/4281/4281/4
Power Direct Vent Energy Saver ModelsDIMENSIONS IN INCHES
These models meet or exceed bothRecovery Efficiency and Standby Loss Requirements of ASHRAE 90.1b (Current Edition).
A
Floorto
HeaterTop
B
JacketDia.
GPHRecovery
at °F Rise*
40° 100° 140°
1st HourDeliveryRating
InputBTU/Hr.
Gal.Cap.
ModelNumber
C
VentSize
653/4653/4653/4743/4743/4743/4
G
Floorto TopWaterConn.
513/8513/8513/8603/8603/8603/8
F
FrontHot
WaterConn.
203/4203/4203/4203/4203/4203/4
E
FrontCold
WaterConn.
173/8173/8173/8173/8173/8173/8
D
Floorto GasConn.
687/8687/8687/8777/8777/8777/8
H
Floorto
VentConn.
437/8437/8437/8437/8437/8437/8
K
Depth
3/43/41
3/43/41
ReliefValveOpen
3/43/43/43/43/43/4
GasConn.Dia.
WaterConn.
NATURAL GAS AND LIQUID PROPANE GAS MODELS
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
11/2 (T&F)2 (R)
––
720––
815
Approx.Shipping
Weight (lbs)
Std. ASME645645645735735735
(A) = ASME Code Available(T) = Top (F) = Front, (R) = Rear ConnectionsFor Propane Gas models change suffix “N” to “X”.For venting consult I&O manual.* Recoveries and First Hour Delivery Rating are based on Thermal Efficiencies of 80%. (E) LowNOx Burners 1st Hr. Del. GPH Rec.
Rating 40° 100° 140°PDV-80S-150E-3N 150,000 BTU/Hr. 201 364 145 104PDV-80S-200E-3N 180,000 BTU/Hr. 231 436 175 125PDV-80S-250E-3N(A) 220,000 BTU/Hr. 269 533 213 152PDV-100S-150E-3N 150,000 BTU/Hr. 215 364 145 104PDV-100S-200E-3N 180,000 BTU/Hr. 245 436 175 125PDV-100S-250E-3N(A) 220,000 BTU/Hr. 283 533 213 152
(LP) Propane Gas Inputs 1st Hr. Del. GPH Rec. Rating 40° 100° 140°
PDV-80S-250-3X(A) 225,000 BTU/Hr. 274 545 218 156PDV-100S-250-3X(A) 225,000 BTU/Hr. 288 545 218 156
For LowNOx compliance to meet SCAQMD requirements, place an “E”following the BTU Input identifier of the model number.Example: PDV-100S-200E-3N
3" Max.Intake
ModelNumber
PDV-80S-150,200PDV-80S-250PDV-100S-150,200PDV-100S-250
45 ft.N/A
45 ft.N/A
45 ft.N/A
45 ft.N/A
3" Max.Exhaust
4" Max.Intake60 ft.60 ft.60 ft.60 ft.
60 ft.60 ft.60 ft.60 ft.
4" Max.Exhaust
Commercial Gas Energy Saver 122/123Electronic Ignition Fan Induced Water Heaters
■ Honeywell integratedcontrol—Proven designcombines temperaturecontrol, diagnostic codesand system ignitionfunctions into a singlecontrol board with adigital LCD display
■ Operation mode■ Service mode■ Automatic flue damper■ Electronic ignition■ Factory installed Hydrojet®
Total Performance System■ Vitraglas® lining■ Automatic re-set E.C.O.■ Non-CFC foam insulation■ Water connections—11⁄2"
NPT front factory installedtrue dielectric fittings
■ Protective magnesiumanode rods
■ Hand hole cleanout■ Sanitizing capability■ NSF construction available■ ASME construction
available on 250,000 BTUmodel (73.2 kW)
■ T&P relief valve installed■ Low restriction brass
drain valve
E
F
D
A
C
G
39 7/8"DEPTH
B
Photograph is ofD-65T-625-3NA
625,000725,000
6580
D-65T-625-3N(A)D-80T-725-3N(A)
651759
15151757
606703
433502
633/8795/8
281/4281/4
Induced Draft Energy Saver ModelsDIMENSIONS IN INCHES
These models meet or exceed both Recovery Efficiency and StandbyLoss Requirements of ASHRAE 90.1b (Current Edition).80% Recovery Efficiency
A
Floorto
HeaterTop
B
JacketDia.
GPHRecovery
at °F Rise*
40° 100° 140°
1st HourDeliveryRating
Nat. &LP
InputBTU/Hr.
Gal.Cap.
ModelNumber
88
C
VentDia.
687/8791/8
G
Floorto
VentHeight
541/8641/4
D
Floorto HotWaterConn.
287/8287/8
E
Floorto ColdWaterConn.
101/2101/2
F
Floorto GasConn.
11
ReliefValveOpen
1†1†
GasConn.Dia.
NATURAL GAS AND LIQUID PROPANE GAS MODELS
775880
Approx.Shipping
Weight (lbs)
Std. ASME720800
(A) = ASME Code AvailableFor Propane Gas models change suffix “N” to “X”.†LP Gas connection 3/4".
* Recoveries and First Hour Delivery Rating are based on Thermal Efficiencies of 80%.
(LP) Propane Gas Inputs 1st Hr. Del. GPH Rec. Rating 40° 100° 140°
D-65T-625-3N(A) 625,000 BTU/Hr. 651 1515 606 433D-80T-725-3N(A) 725,000 BTU/Hr. 759 1757 703 502
Commercial Gas Energy Saver 124/125Ultra High Efficiency Water Heater
■ ASME constructionavailable
■ Up to 99.1% thermalefficiency
■ Electronic controls■ Low-NOx Premix Power
Burner■ Three pass flue system■ Flexible venting■ Vitraglas® lining■ Factory installed Hydrojet®
Sediment ReductionSystem
■ Factory installed dielectricfittings
■ Non-CFC foam insulation
■ Four protectivemagnesium anode rods(except EF-100T-399)
■ Hand hole cleanout■ Zero inch clearance
to combustibles■ Two powered anode rods
and one non-poweredanode rod in theEF-100T-399
■ NSF construction available■ T&P relief valve installed■ Low restriction brass
drain valve■ Complies with SCAQMD
Low NOx requirements
H
G
C
C
F
E
J
A
B
DCLEANOUT
21/2"
1/2"
MIN.
NPTCONDENSATECONNECTION
11/2"NPT
OUTLET
11/2"NPT
INLET
1" NPTSPACE
HEATINGOUTLET
1" NPTSPACE
HEATINGRETURN
3" PVCEXHAUST
3" PVC INLET 3/4" NPT GAS INLET
T&P VALVE
AIR INTAKE
GAS INLETEXHAUST
81/4"
81/4"
Photograph of EF-60T-199E-3N
96.093.092.099.198.597.092.093.0
606060100100100100100
EF-60T-125E-3N(A)EF-60T-150E-3N(A)EF-60T-199E-3N(A)EF-100T-150E-3N(A)EF-100T-199E-3N(A)EF-100T-250E-3N(A)EF-100T-300E-3N(A)EF-100T-399E-3N(A)
187211265250309364405518
3644235584505977358361127
145169223180239294335451
104121159128171210239322
575757
775/8775/8775/8775/8775/8
4242426363636363
281/4281/4281/4281/4281/4281/4281/4281/4
570570570900900900900950
eF Series® Energy Saver ModelsDIMENSIONS IN INCHES
These models meet or exceed both
Recovery Efficiency and Standby Loss Requirements of ASHRAE 90.1b (Current Edition).
H
Floor toTop ofHeater
55555555
J
Floor toVent
Conn.
B
JacketDia.
33333333
C
Vent& AirIntakeSize
GPHRecoveryat °F Rise
40° 100° 140°
1st HourDeliveryRating
Therm.Eff. %
125,000150,000199,999150,000199,999250,000300,000399,999
InputBTU/Hr.
Gal.Cap.
ModelNumber
G
HotWaterOutletConn.
127/8127/8127/8127/8127/8127/8127/813
F
ColdWaterInlet
Conn.531/2531/2531/2743/4743/4743/4743/4731/4
521/2521/2521/2731/8731/8731/8731/8731/8
E
Floorto GasConn.
A
Floorto AirIntake
3/43/43/43/43/43/43/41
GasConn.Dia.
3/43/43/43/43/4111
ReliefValveOpen
11/211/211/211/211/211/211/211/2
WaterConn.
4040406060606060
D
Floorto T&PValveConn.
Approx.Shipping
Weight (lbs)
NATURAL GAS AND LIQUID PROPANE GAS MODELS
(A) = ASME Code AvailableFor Propane Gas models change suffix“N” to “X” and remove “E” from modelnumber Example: EF-100T-150-3X.Note: The weight is the same for bothASME and Non-ASME models.NSF Compliance Kit—p/n 265-44542-04.
eF Series® Optional Equipment Features:Maxitrol Gas Pressure Regulating valve—Ensures proper supply pressure to eF unit of 7" to 11" W.C.(provided incoming pressure is between 1/2 and 2 psi). This can be ordered as a separate part, oras part of the heater. For the separate part, please use p/n 243-45517-00(not available for use with the EF-100T-399).Low Gas Inlet Pressure Option—Pre-assembled toallow operation at lower inlet natural gas pressure.Concentric Vent Terminal Kit—3" terminationfitting provides for only one exit opening throughwall or roof (p/n 239-44069-01).
ModelNumber
EF-60T-125EF-60T-150EF-60T-199EF-100T-150EF-100T-199EF-100T-250EF-100T-300EF-100T-399
Max. 3" PVC,ABS & CPVC
120 ft.100 ft.80 ft.120 ft.100 ft.80 ft.60 ft.50 ft.
Max. 4" PVC,ABS & CPVC
170 ft.150 ft.130 ft.170 ft.150 ft.130 ft.110 ft.100 ft.
Intake/CombustionAir Rain Cap
VentExhaust
46 3/4"
Commercial Gas Energy Saver 126/127Copper-Brute™ Water Heaters
175,000 Thru 399,000 BTU/Hr.■ Direct fired “Fin-Tube” design
for maximum efficiency andfast response to demand
■ Flexible design allows manyinstallation options
■ 160 PSI ASME heatexchanger constructionassures safety and quality,provides better than 80%combustion efficiency
■ Exceeds ASHRAE 90.1b(Current Edition)
■ Heavy Inso Blockrefractory-precast in 2" thickinter-locking sectionsprovides maximum heatretention
■ Stainless steel burners withslide-out burner tray allowsfor easy inspectionand service
■ 24 volt control and safetycircuit providesprecise temperature andsafety control
■ Solid copper heat exchanger■ Includes relief valve, all
bronze factory mountedpump, flow switch (mounted& wired); pump delay, andremote thermostat
■ Energy Management Monitor(EM2) pump time delay
Optional Outdoor Vent Cap
Required Indoor Draft Hood
CV (Dia.)
BA V
RIGHT SIDEINLET
11"
30 3/16"
26 1/2"
40 9/16"
40 3/8"
OUTLET
175,000250,000325,000399,000
B40175INB40250INB40325INB40400IN
142,000204,000263,000324,000
18221/2263/4313/4
170245316389
275305345380
Copper-Brute™ Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE MODELS A
261/231
351/4401/4
231/2243/4257/8267/8
B C
6789
V
100°F122175226278
140°F
Temperature Rise Across HeaterGallons Per Hour Delivered
3/43/43/43/4
Natural1/21/21/21/2
Propane
Gas Connection SizeIndoorOutput
BTU/Hr.Input
BTU/Hr.
IndoorModel
Number11/211/211/211/2
WaterConn.
Approx.Shipping
Weight (lbs)
175,000250,000325,000399,000
B40175ENB40250ENB40325ENB40400EN
140,000200,000260,000320,000
18221/2263/4313/4
168240312384
275305345380
NATURAL GAS AND LIQUID PROPANE MODELS A
261/231
351/4401/4
141/16
181/16
193/16
225/8
B C
6789
V
100°F120171223274
140°F
Temperature Rise Across HeaterGallons Per Hour Delivered
3/43/43/43/4
Natural1/21/21/21/2
Propane
Gas Connection SizeOutdoorOutput
BTU/Hr.Input
BTU/Hr.
OutdoorModel
Number11/211/211/211/2
WaterConn.
Approx.Shipping
Weight (lbs)
For LP Models, change suffix “N” to “P”. Above models include: Standing Pilot Ignition; Flow Switch (mounted and wired); All Bronze Pump and Fittings; and Remote Aquastat (E-144). Pump supplied for units 175 to 1825 sized for normal water (7-17 Grain Hardness).For hard or soft water pumps please consult factory.
For LP Models, change suffix “N” to “P”. Indoor configuration includes the separate drafthood. All units feature: System 1 Standing Pilot; Pump Delay; All Bronze Pump; Flow Switch (mountedand wired); and Remote Aquastat (E-144)
Commercial Gas Energy Saver 128/129Copper-Brute™ Water Heaters
500,000 Thru 1,825,000 BTU/Hr.■ Non-gasket “Copper-Fin” heat exchanger■ 82% thermal efficiency■ Ceramic tile combustion chamber■ 24 Volt controls■ Built-in draft hood■ Meets ASME Code, Section H■ 5 year warranty■ Includes relief valve, factory-mounted all
bronze pump, flow switch, pump delay,and remote thermostat
■ Options include intermittent pumpcontroller, cupro-nickel heat exchanger,manual reset high limit, alarm bell
■ 160 PSI ASME heat exchangerconstruction assures safety and quality
■ Energy Management Monitor (EM2) pumptime delay
12 1/4"
4 3/4"
28 1/4"
29 3/4"
RIGHTSIDE
7 3/4" 8"
58"
17"29"
A B
C
OutletInlet
GasConn.
500,000600,000715,000850,000
1,010,0001,200,0001,430,0001,670,0001,825,000
B40500INB40600INB40715INB40850INB41010INB41200INB41430INB41670INB41825IN
405,000486,000579,000689,000818,000972,000
1,158,0001,353,0001,478,000
395/8381/2441/4505/858
661/476
853/8921/4
395/8445/8501/4565/864
721/482
913/8981/4
235/8225/8225/8215/8205/8205/8195/8195/8195/8
4865836958269821166139016231774
74583590595510751200134514301480
Copper-Brute™ Indoor Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE MODELS A B C
101212141616181818
V
100°F54064877291810911296154418041971
90°F34741749659070183399311591267
140°F
Temperature Rise Across HeaterGallons Per Hour Delivered
1111
11/411/411/411/411/4
111
13/411/411/4
3/43/43/43/411
11/411/411/4
11/2
11/211/2
Natural Propane
Gas Connection SizeIndoorOutput
BTU/Hr.Input
BTU/Hr.
IndoorModel
Number2222
21/221/221/221/221/2
WaterConn.
Approx.Shipping
Weight (lbs)
For propane models, change “N” to “P”. Outdoor units include Outdoor Vent Terminal and Outdoor Combustion Terminal.Above models include: Hot Surface Ignition; Flow Switch (mounted and wired); All Bronze Fitted Pump; Pump Delay and Remote Sensor.Pump supplied are sized for normal water (7-17 Grain Hardness). For hard or soft water pumps please consult factory.No drafthood required on size 500-1825 outdoor units.For outdoor units change “IN” to “EN”.
Commercial Gas Energy Saver 130/131Copper-Brute™ II Water Heaters
199,900 Thru 399,900 BTU/Hr.■ 84% thermal efficiency■ NOx rate less than 30ppm■ Hot surface ignition■ Stainless steel burners
■ Unique gasketless heat exchanger design■ Ceramic tile sealed combustion chamber■ 125 PSI ASME temperature and pressure
relief valve
■ ASME “H” stamp designated and certifiedfor potable water use
■ Glass lined headers
F C B G
A
H
141/3
18
20
286/8
142/3
51/4
236/8
123/4
W
BV W
E & D
C
V
199,900299,900399,900
BWCV0200BWCV0300BWCV0400
169,900254,900339,900
201/2261/2331/2
71/371/371/3
231/8231/8231/8
204306408
290320350
Copper-Brute™ II Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE MODELS A B
41/241/241/2
C
231/8231/8231/8
D E
57/857/857/8
F
57/857/857/8
G
344/5404/5474/5
H
GPHRecovery
100°F Rise3/43/43/4
GasConn.
OutputBTU/Hr.
InputBTU/Hr.
IndoorModel
Number
11/211/211/2
WaterConn.
446
AirConn.
W*
567
VentConn.
V*
456
Horiz.VentPipe
Approx.Shipping
Weight (lbs)
■ 5 year limited warranty on heat exchanger■ Electronic PID staging control with LCD
and touchpad
■ Adjustable high limit with manual reset■ Pump and flow switch mounted and wired■ Temperature/pressure gauge
■ 160 PSI ASME heat exchangerconstruction
■ Energy Management Monitor (EM2) pumptime delay
* Air and vent connections may be on top or back of unit and are field convertible.For LP Models, change “N” to “P”. Outdoor units include Outdoor Vent Terminal and Outdoor Combustion Terminal.Above models include: Hot Surface Ignition; Flow Switch (mounted and wired); All Bronze Fitted Pump; Pump Delay and Remote Sensor.Pump supplied are sized for normal water (7-17 Grain Hardness). For hard or soft water pumps please consult factory.
Commercial Gas Energy Saver 132/133Copper-Brute™ II Water Heaters
500,000 Thru 1,999,000 BTU/Hr.■ 84% thermal efficiency■ NOx rate less than 10ppm■ Hot surface ignition■ Stainless steel burners
■ Unique gasketless heatexchanger design
■ Ceramic tile sealed combustionchamber
■ 125 PSI ASME temperature andpressure relief valve
■ 24V control system■ ASME “H” stamp designed and
certified for potable heating use■ Glass lined headers
133/4"
122/5"
411/2"351/3"
133/4" 131/2"
73/4"
193/4"
291/3"
10"2"
500,000750,000999,000
1,250,0001,500,0001,750,0001,999,000
BWCV0500BWCV0750BWCV1000BWCV1250BWCV1500BWCV1750BWCV2000
425,000638,000849,000
1,063,0001,275,0001,488,0001,699,000
331/2451/2571/268
781/289
991/2
153/4213/4283/434
393/4441/2493/4
323/4323/4323/4291/2291/2291/2291/2
51076510191276153117862040
425505615675760825955
Copper-Brute™ II Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE MODELS A B
53/453/453/4101/8101/8101/8101/8
C
293/4293/4293/4303/4303/4303/4303/4
D E
73/473/473/483/483/483/483/4
F
83/483/47
83/483/483/483/4
G
4658708091101112
H
GPHRecovery
100°F Rise
11/411/411/22222
GasConn.
OutputBTU/Hr.
InputBTU/Hr.
IndoorModel
Number
22
21/221/221/221/221/2
WaterConn.
68888812
AirConn.
W*
6101012121414
VentConn.
V*
66888812
Horiz.VentPipe
Approx.Shipping
Weight (lbs)
■ Electronic PID staging control with LCDand touch pad
■ 5 year limited warranty on heat exchanger■ Pump and flow switch mounted and wired
■ Adjustable high limit with manual reset■ Temperature/pressure gauge■ 160 PSI ASME heat exchanger
construction
■ Energy Management Monitor (EM2) pumptime delay
■ When ordering outdoor models, you mustorder outdoor vent kits
* Air and vent connections may be on top or back of unit and are field convertible.For LP Models, change “N” to “P”. Outdoor units include Outdoor Vent Terminal and Outdoor Combustion Terminal.Above models include: Hot Surface Ignition; Flow Switch (mounted and wired); All Bronze Fitted Pump; Pump Delay and Remote Sensor.Pump supplied are sized for normal water (7-17 Grain Hardness). For hard or soft water pumps please consult factory.
Commercial Electric Energy Saver 134/135Water Heaters
Incoloy Element Availability Chart
yesnonononononononono
120V
1500200025003000350040004500500055006000
Watts
yesyesyesyesyesyesyesyesyesyes
208V
yesyesyesyesyesyesyesyesyesyes
240V
noyesnoyesnoyesyesyesyesyes
277V
noyesnoyesnoyesyesyesyesyes
480V
Specify voltage and wattage when ordering.All models are UL listed. All water connections are 3⁄4" NPT (LD-120R has 1" NPT). All electricalconnections are 3⁄4". All models are certified at 300 PSI test pressure and 150 PSI working pressure.All models come equipped with two installed heat traps (except LD-120R, LD-20L, Utility and WallHung models). All models include an installed T&P Relief Valve. Note: All Upright and Lowboy’s will be wired 240 Volt with two 4500 watt elements, 3 phase non-simultaneous operation (except 277 volt, 277 volt is only available in single phase operation). Otherwattages and voltages are available. These models are field convertible to single phase andsimultaneous operation. All models have a maximum total wattage of 3000 watts at 120 Volt. Incoloyelements available for most inputs.Note: All Wall Hung and Utility’s will be wired 120 Volt with a 1500 watt element as single phaseoperation. 3 phase wiring not available on Wall Hung or Utility models (Single Element Units). Otherwattages and voltages are available. Maximum total wattage for 6 and 12 gallon sizes is 3000 wattsfor all voltages. All models have a maximum wattage of 3000 watts at 120 Volt. Incoloy elementsavailable for most inputs. NSF Construction not available on Light Duty Energy Saver models.
Three Phase Amperes for Non-Simultaneous Operation
1500W / 1500W2000W / 2000W2500W / 2500W3000W / 3000W3500W / 3500W4000W / 4000W4500W / 4500W5000W / 5000W5500W / 5500W6000W / 6000W
7.229.62
12.0314.4316.8419.2521.6524.0626.4628.87
120VElement Wattage
4.165.556.948.339.72
11.1012.4913.8815.2716.65
208V
3.614.816.017.228.429.62
10.8312.0313.2314.43
240V
1.802.413.013.614.214.815.416.016.627.22
480V
Single Phase Amperes for Non-Simultaneous Operation
1500W / 1500W2000W / 2000W2500W / 2500W3000W / 3000W3500W / 3500W4000W / 4000W4500W / 4500W5000W / 5000W5500W / 5500W6000W / 6000W
12.5016.6720.8325.0029.1733.3337.5041.6745.8350.00
120VElement Wattage
7.219.62
12.0214.4216.8319.2321.6324.0426.4428.85
208V
6.258.33
10.4212.5014.5816.6718.7520.8322.9225.00
240V
3.134.175.216.257.298.339.38
10.4211.4612.50
480V
Phase 1**3*
Single Phase Non-simultaneousThree Phase Non-simultaneous
DesignatorVoltage
A120
B208
D277**
F415
G480
C240
Designator
Wattage
0301500/1500
0402000/2000
0502500/2500
0603000/3000
07035003500
0804000/4000
0904500/4500
1005000/5000
1105500/5500
1206000/6000
EX: LD-65R-3-3C090,Three Phase Non-simultaneous, 240V, 4500 W/4500 W.
EX: LD-65R-3-3C090*All models are shipped from factory three phase. Can be converted to single phase and/or simultaneousoperation in the field.**Can be ordered in 277V. 277V cannot be ordered as three phase operation.
EX: LD-65R-3-3C090
Phase 1 Single Phase Non-simultaneous DesignatorVoltage
A120
B208
D277
G480
C240
DesignatorWattage
0151500
0202000
0252500
0303000
0353500
0404000
0454500
0505000
0555500
0606000
EX: LD-20U-3-1A015Single Phase Non-simultaneous, 120V, 1500 W.
EX: LD-20U-3-1A015
EX: LD-20U-3-1A015
Commercial Light Duty Upright and Lowboy Model Number Suffix
Commercial Light Duty Utility and Wall Hung Model Number Suffix
Commercial Electric Energy Saver 136/137Light Duty Lowboy Water Heaters
■ Can be offered with optional side/top T&P relief valve■ Field Convertible – capable of being converted
to single phase and/or simultaneous operationat the terminal block
■ Vitraglas® lining■ Factory installed Hydrojet® Total Performance System■ Water Connections – 3/4" NPT factory installed
true dielectric fittings■ 1" Non-CFC foam insulation■ Fully automatic controls (160°F maximum)■ Direct heat transfer with immersed elements■ Protective magnesium anode rod■ Factory installed heat traps■ Low restriction brass drain valve■ T&P relief valve installed
B
A
8"
DC
*Optional Dimension
Photograph is ofLD-20L3-3
19304047
LD-20L3-3LD-30L3-3LD-40L3-3LD-50L3-3
18202224
247/8291/2311/2313/4
5886115143
261/8305/83333
Lowboy Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC B
JacketDiameter
GallonCapacity
ModelNumber
A
Floor toHeater Top
257/8305/8327/8331/8
C
Floor toWater Conn.
191/4/247/824/291/2
241/8/311/2241/8/313/4
D
Floor toT&P Conn.
E
Floor toJunction Box
Approx.Shipping
Weight (lbs)
Specify voltage, phase and input when ordering.* All models feature side T&P location and must specify top T&P when ordering. "D" dimension listed as side/top.NOTE: Refer to pages 134/135 for technical information and pages 148/149 for GPH recovery information.
Wattage Limitations for Simultaneousand Non-Simultaneous Operation
yesnonononononononono
120V
1500 / 15002000 / 20002500 / 25003000 / 30003500 / 35004000 / 40004500 / 45005000 / 50005500 / 55006000 / 6000
Wattage
yesyesyesyesyesyesyesyesnono
208V
yesyesyesyesyesyesyesyesyesno
240V
yesyesyesyesnoyesyesyesnoyes
277V
yesyesyesyesnoyesyesyesnoyes
480V
Commercial Electric Energy Saver 138/139Light Duty Water Heaters
■ Field Convertible – capable of being converted to single phaseand/or simultaneous operation at the terminal block
■ Vitraglas® lining■ Factory installed Hydrojet® Total Performance System■ Water Connections – 3/4" NPT factory installed
true dielectric fittings (LD-120R has 1" fittings)■ 2" Non-CFC foam insulation■ Fully automatic controls (160°F maximum)■ Direct heat transfer with immersed screw-type elements■ Protective magnesium anode rod■ Factory installed heat traps (except LD-120R)■ Low restriction brass drain valve
D
8"
CE
A
B
Photograph is ofLD-50S3-3
3040506580119
LD-30R3-3LD-40S3-3LD-50S3-3LD-65R3-3LD-80R3-3LD-120R3-3
182022222428
461/2467/8461/2591/459
623/4
85103130156183305
473/4481/8473/4601/2601/464
Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC B
JacketDiameter
GallonCapacity
ModelNumber
A
Floor toHeater Top
471/4477/8471/2603/4603/4643/8
C
Floor toWater Conn.
461/2467/8461/2591/459
623/4
D
Floor toT&P Conn.
E
Floor toJunction Box
Approx.Shipping
Weight (lbs)
Specify voltage, phase and input when ordering.NOTE: Refer to pages 134/135 for technical information and pages 148/149 for GPH recovery information.
Wattage Limitations for Simultaneousand Non-Simultaneous Operation
yesnonononononononono
120V
1500 / 15002000 / 20002500 / 25003000 / 30003500 / 35004000 / 40004500 / 45005000 / 50005500 / 55006000 / 6000
Wattage
yesyesyesyesyesyesyesyesnono
208V
yesyesyesyesyesyesyesyesyesno
240V
yesyesyesyesnoyesyesyesnoyes
277V
yesyesyesyesnoyesyesyesnoyes
480V
Commercial Electric Energy Saver 140/141Light Duty Utility Water Heaters
■ Side connections for cold water inlet and hot wateroutlet allowing insulation in tight places
■ 6 and 12 gallon models come equipped with alternatewater connecton tappings on top
■ Vitraglas® lining■ Water Connections – 3/4" NPT factory installed
true dielectric fittings
■ 1" Non-CFC foam insulation(LD-30U has 2" Non-CFC insulation)
■ Fully automatic controls (160°F maximum)■ Direct heat transfer with immersed
screw-type element■ Protective magnesium anode rod■ T&P relief valve installed
C DA
B
F
E
B
C DG
F
EA
BTop View
6 & 12 Gallon ModelTop View
20 & 30 Gallon Model
10 & 15 Gallon Models
8
4 ALTERNATE COLD INLET (PLUGGED)
ALTERNATE HOT OUTLET (PLUGGED)
PLUGTYPEANODE
PLUGTYPEANODE(20 GAL.ONLY)
Photograph is ofLD-20U3-1
61012151930
LD-6U3-1†LD-10U3-1†LD-12UT3-1†LD-15U3-1†LD-20U3-1LD-30U3-1
141614181822
161/2171/2273/4201/4243/4293/4
334848555982
173/41229
1211/16
2631
Utility Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC B
JacketDiameter
GallonCapacity
ModelNumber
A
Floor toHeater Top
101/815
211/8173/4181/4231/4
C
Floor to HotWater Conn.
161/2911/16
273/4101/8101/430
G
Floor to Anode Rod
3511/16
361/83
43/8
F
Floor to ColdWater Conn.
101/814
211/8163/4183/8231/4
D
Floor toT&P Conn.
E
Floor toJunction Box
Approx.Shipping
Weight (lbs)
Specify voltage, phase and input when ordering.NOTE: Refer to pages 134/135 for technical information and pages 148/149 for GPH recovery information. †Maximum wattage at any voltage is 3000 W.
Wattage Limitations
yesyesyesyesnononononono
120V
1500200025003000350040004500500055006000
Wattage
yesyesyesyesyesyesyesyesyesyes
208V
yesyesyesyesyesyesyesyesyesyes
240V
yesyesyesyesnoyesyesyesnoyes
277V
yesyesyesyesnoyesyesyesnoyes
480V
Commercial Electric Energy Saver 142/143Light Duty Wall Hung Water Heaters
■ Vitraglas® lining■ Terminal block factory installed in junction box on all
models■ Water Connections – 3/4" NPT factory installed
true dielectric fittings are on bottom of heater for easeof installation
■ 1" Non-CFC foam insulation■ Fully automatic controls (160°F maximum)■ Direct heat transfer with immersed screw-type element■ Factory installed heavy duty wall mounting bracket■ Protective magnesium anode rod
C
WALLELECTRICAL
JUNCTION BOX
8INCHES
BA
12.81"D E
BFRONT
12.81"
HOTOUTLET
COLDINLET
TOPVIEW
BOTTOMVIEW
WALL3/4" RELIEF VALVE OPENING
HEATING ELEMENT & THERMOSTAT ACCESS
HOT OUTLET COLD INLET
FRONTVIEW
SIDEVIEW
Photograph is ofLD-WH20L3-1
6121930
LD-WH6U3-1†LD-WH12U3-1†LD-WH20L3-1LD-WH30L3-1
14181822
153/4163/8243/8291/4
33475886
117/8121/221
253/4
Wall Hung Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC B
JacketDiameter
GallonCapacity
ModelNumber
A
Height toHeater Top
145/8185/8185/8205/8
C
Wall toFront
113/4123/4181/423
D
Height toBracket
E
Height toT&P Conn.
Approx.Shipping
Weight (lbs)
Specify voltage, phase and input when ordering.NOTE: Refer to pages 134/135 for technical information and pages 148/149 for GPH recovery information. †Maximum wattage at any voltage is 3000 W.
Wattage Limitations
yesyesyesyesnononononono
120V
1500200025003000350040004500500055006000
Wattage
yesyesyesyesyesyesyesyesyesyes
208V
yesyesyesyesyesyesyesyesyesyes
240V
yesyesyesyesnoyesyesyesnoyes
277V
yesyesyesyesnoyesyesyesnoyes
480V
Commercial Electric Energy Saver 144/145Light Duty Conversion Kits
LDCE Voltage and Wattage Conversion Kits for Upright and LowBoy Models
1500 / 15002000 / 20002500 / 25003000 / 30003500 / 35004000 / 40004500 / 45005000 / 50005500 / 55006000 / 6000
265-46409-01N/AN/AN/AN/AN/AN/AN/AN/AN/A
Simultaneous andNon-simultaneous
Voltage
120
265-46409-05265-46409-06265-46409-07265-46409-08265-46409-09265-46409-10265-46409-11265-46409-12
N/AN/A
208
265-46409-13265-46409-05265-46409-06265-46409-14265-46409-07265-46409-08265-46409-09265-46409-15265-46409-10
N/A
240
265-46409-16265-46409-17265-46409-18265-46409-19
N/A265-46409-20265-46409-21265-46409-22
265-46409-40**265-46409-23
277
265-46409-24265-46409-43265-46409-25265-46409-26265-46409-27265-46409-29265-46409-30265-46409-31265-46409-44265-46409-45
380
265-46409-41265-46409-24265-46409-43265-46409-25265-46409-26265-46409-27265-46409-28265-46409-29265-46409-30265-46409-31
415
265-46409-32265-46409-33265-46409-34265-46409-35
N/A265-46409-36265-46409-37265-46409-38
265-46409-42**265-46409-39
480
Note: Above chart can be used to determine maximum wattage at certain voltages.** Incoloy element only.
LDCE Voltage and Wattage Conversion Kits for Utiility, Wall Hung and Single Element Models
1500200025003000350040004500500055006000
265-46409-01 265-46409-02* 265-46409-03* 265-46409-04*
N/AN/AN/AN/AN/AN/A
Single ElementWattage
Voltage
120
265-46409-05265-46409-06265-46409-07265-46409-08265-46409-09265-46409-10265-46409-11265-46409-12
265-46409-46* 265-46409-47*
208
265-46409-13265-46409-05265-46409-06265-46409-14265-46409-07265-46409-08265-46409-09265-46409-15265-46409-10
265-46409-48*
240
265-46409-16265-46409-17265-46409-18265-46409-19
N/A265-46409-20265-46409-21265-46409-22
265-46409-40**265-46409-23
277
265-46409-24265-46409-43265-46409-25265-46409-26265-46409-27265-46409-29265-46409-30265-46409-31265-46409-44265-46409-45
380
265-46409-41265-46409-24265-46409-43265-46409-25265-46409-26265-46409-27265-46409-28265-46409-29265-46409-30265-46409-31
415
265-46409-32265-46409-33265-46409-34265-46409-35
N/A265-46409-36265-46409-37265-46409-38
265-46409-42**265-46409-39
480
Note: Above chart can be used to determine maximum wattage at certain voltages. 6, 10, 12, and 15 gallon models have a maximum wattage of 3000W at any voltage.*265-46409-02, -03, -04, -46, -47 and -48 contain only one element.** Incoloy element only.These are non-simultaneous kits only.
Commercial Electric Energy Saver 146/147Medium Duty 3 Element Water Heaters
■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Water Connections – 11⁄4" NPT factory
installed dielectric waterway fittings■ 2" Non-CFC foam insulation■ Fully automatic controls (180°F maximum)■ Direct heat transfer with immersed
elements■ Protective magnesium anode rod■ T&P relief valve factory installed■ Low restriction brass drain valveOptional
Field Conversion Kits; see next page forpart numbers.NSF Construction Kits; see next page forpart numbers.
A&DC
B
F
E10"
8"
31/8" Photograph is ofE32-80R-3
5080119
E32-50S-3E32-80R-3E32-120R-3
2224
281/4
461/25963
137190312
245/8263/4307/8
Medium Duty Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC B
JacketDia.
GallonCapacity
ModelNumber
A
Floor toHeater Top
471/86064
C
Floor toWater Conn.
447/8573/8613/8
E
Floor to Control Box
475/8601/8641/8
D
Floor toT&P Conn.
F
Control Boxto Back
of Heater
Approx.Shipping
Weight (lbs)
All Medium Duty heaters are wired 240V/3 phase 18 kW.Other voltages, wiring phase and kW are available and must be specified when ordering.NOTE: Refer to pages 148/149 for GPH recovery information.
RequiredTotal
HeaterWattage
ElementWattage
Kit Part Numbers
208V
Conversion Kit Table
240V 480V60009000
12000135001500018000
200030004000450050006000
265-43942-13265-43942-14265-43942-15265-43942-16265-43942-17265-43942-18
265-43942-07265-43942-08265-43942-09265-43942-10265-43942-11265-43942-12
265-43942-01265-43942-02265-43942-03265-43942-04265-43942-05265-43942-06
208V 240V 277V
Full Load Amperes - (Single Phase / Three Phase) and 100°F Rise
380V 415V 480V Recovery86.5/50
28.8/16.6
Input kW186
75/43.425/14.4
6421.6
2810
258.3
37.5/21.612.5/7.2
74GPH25GPH
ModelNumber Kit Part Numbers
NSF Construction Kit
E32-50SE32-80RE32-120R
265-45446-01265-45446-02265-45446-03
1,000 watts = 1kW
GPH Recovery Table 148/149for kW Input
kWInput
Gallon Per Hour Recovery Capacities
40°F1
1.52
2.53
3.54
4.55
5.56912
13.515182427
10.315.520.725.831.136.241.446.551.756.962.193.1124140155186248279
60°F6.910.313.817.220.724.127.631.134.537.941.462.18393103124165186
90°F4.66.99.211.513.816.118.420.723.125.327.641.455626983110124
100°F4.16.28.310.312.414.516.518.620.722.724.837.25056627499112
140°F2.94.45.97.48.910.311.813.314.716.217.726.5354044537180
kWInput
Gallon Per Hour Recovery Capacities
40°F3036455481144162180225270360396450540630720900
310372465558838148916751861232627923722409446535583651474449306
60°F20724831037255899311171241155018612482273031023722434349636204
90°F138165207248372662744827103312411654182020682482289533094136
100°F12414918622333559667074493111171489163818612233260629783722
140°F891061331602394254795326657981063117013291595186121272659
GPH Recovery Table
Commercial Electric Energy Saver 150/151Surface and Immersion Thermostat Water Heaters
Immersion Thermostat withContactors■ Immersion type thermostat
for accurate temperaturecontrol from positive off upto 180°F
Surface Mounted Thermostats■ Thermostat step control can
be accomplished by variablesettings
All Models Feature■ Vitraglas® lined tank■ Factory installed Hydrojet®
Sediment Reduction System■ Completely pre-wired with
pressure lug terminal orfuse block eliminating theneed for splicing or tapingwires
■ Water Connections – 11⁄2"NPT factory installedtrue dielectric fittings
■ 3" Non-CFC foam insulation■ Two protective magnesium
anode rods■ Hand-hole cleanout opening■ Low restriction brass drain
valve■ T&P relief valve installedOptions■ ASME & NSF construction
available on Immersion andSurface Thermostats
■ Low temperature thermostatavailable(Range 80°F to 140°F)
E C
DA
Hot
B
T&PValve
ColdWaterSupply
FPhotograph is ofM-II-50-36-3SF
5080119
M-II-50-kW-3SFM-II-80-kW-3SFM-II-120-kW-3SF
481/4601/4641/2
461/2461/2501/4
2426
301/4
Energy Saver ModelsDIMENSIONS IN INCHES
These models meet or exceed bothRecovery Efficiency and Standby Loss Requirements
of ASHRAE 90.1b (Current Edition).
A
Floor to Heater
Top
B
JacketDia.
Gal.Cap.
ModelNumber
E
Floor toTop ofControl
Box63/463/463/4
F
Floor toCold
WaterInlet
501/2631/8661/2
D
Floor toHot
WaterOutlet
41521/255
C
Floor toT&P
Conn.
ELECTRIC MODELS
302378485
Approx.Shipping
Weight (lbs)
Std. ASME270335430
Model numbers shown are for Surface Mount thermostats. For Immersion thermostat change suffix “SF” to “CF”.Voltage and phase must be specified when ordering. Example: M-II-50-12-3SF, 240 Volt, 3 phase.All models available in 208/240/277 and 480 volt.(A) ASME Construction available.For ASME construction add “A” to the model number.Example: M-II-50A-12-3SF, 240 Volt, single phase.NOTE: Refer to pages 148/149 for GPH recovery information. HOT
COLD45°
15 1/8"
22 1/8"19 1/2"
HOT
COLD 52°
13"
56°T & P 47°
T & P
HOT
COLD 58°
12"
18 1/2"
63°T & P
M-II-50 M-II-80 M-II-120
Commercial Electric Energy Saver 152/153ASME Water Heaters
Standard Features:■ Immersion Thermostat with
Contactors - Immersion typethermostat for accuratetemperature control frompositive off up to 180°F
■ ASME code construction■ Vitraglas® lining■ Factory installed Commercial
Hydrojet® SedimentReduction System
■ Completely pre-wired withpressure lug terminal or fuseblock eliminating the need forsplicing or taping wires
■ Factory installed dielectricfittings
■ 3" Non-CFC foam insulation
■ Protective magnesiumanode rod
■ Hand-hole cleanout opening(20 thru 120 gallon modelsonly)
■ T&P relief valve installed■ Low restriction brass drain
valveOptions:■ Low water cut-off switch■ Safety door interlock■ High and low pressure limit
switches■ Alarm horn■ Temperature and pressure
gauge■ Time delay step sequences
(24kW and above)■ NSF construction
T&P
DRAIN
HI/LOWPRESSURE
B
A
E
ANODE
T&P VALVE
OUTLET
F
D
C
CLEANOUTNOTAVAILABLEON 6/12 GAL.
Photograph is of30A-36-3
39183636818181
6122030405080119
6A-kW-312A-kW-320A-kW-330A-kW-340A-kW-350A-kW-380A-kW-3120A-kW-3
171/428
271/238
481/4473/4601/4641/2
16162020202426
301/4
1728273838
461/2461/2501/4
181/16
2815/16
28401/4501/2503/8617/8665/16
83118145180220270335430
61/461/461/461/461/4666
181/429
281/239
491/4491/4613/466
ASME Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC A
Floor to Heater
Top
B
JacketDia.
Max.kW Input
Gal.Cap.
ModelNumber
C
Floor to Top of
Control Box
D
Floorto HWOutlet
E
Floorto T&PValve
F
Floorto CWInlet
3/43/43/43/43/411/211/211/2
WaterConn.
Approx.Shipping
Weight (lbs)
COLDCOLD
HOT
78°
10"
14 1/2"
20A, 30A, 40A
13"
HOT
87°
8"
12A
87°78°
COLD
T & P T & P T & P
DRAIN
HOT
75°
8"
13"
6A
75° DRAINDRAIN
HOT
COLD45°
15 1/8"
22 1/8"
120A
19 1/2"
HOT
COLD 52°
13"
80A
56°T & P 47°
T & P
HOT
COLD 58°
12"
18 1/2"
50A
63°T & P
NOTE: Refer to pages 148/149 for GPH recovery information.
Commercial Electric Energy Saver 154/155Booster Water Heaters
Standard Features:■ Glass-lined,150 PSI working
pressure, 6 gallon capacity■ Copper-sheathed, low watt density
elements■ 6" legs are furnished■ Pilot switch; pilot light – hi limit
control■ Attractive stainless steel front
control cover■ Temperature/pressure gauge■ Low water cut-off■ Hinged Door■ UL listed, NSF approved. Meets
fusing requirements of NEC■ Full 2" blanket insulation■ Magnesium anode rod
■ Instantaneous response;continuous 180°F water fordishwashing
■ Low-cost operation■ Immersion thermostat and hi-limit■ Magnetic contactor■ ASME temperature and pressure
relief valve■ 120V circuitryOptional Features■ Stainless steel legs■ 3⁄4" Shock absorber (water
hammer arrestor)■ Pressure or reducing valve with
built in bypass check■ Blended phosphate water
treatment system
Photograph is ofL-I-6-6-5CF
20,47830,71740,95651,19561,43481,912102,390122,868153,585184,302194,484
66666666666
L-I-6-6-5CFL-I-6-9-5CFL-I-6-12-5CFL-I-6-15-5CFL-I-6-18-5CFL-I-6-24-5CFL-I-6-30-5CFL-I-6-36-5CFL-I-6-45-5CFL-I-6-54-5CFL-I-6-57-5CF
203/4203/4203/4203/4203/4242424242424
133/4133/4133/4133/4133/4121212121212
1313131313181818181818
118118120120120142142142142142142
Booster Energy Saver ModelsDIMENSIONS IN INCHES
L
Length
W
WidthInput
BTU/Hr.Gal.Cap.
6293124155186248310372465558573
35537189106142177213266316326
GPHRecovery
at Degree Rise
40°F 70°F69121518243036455457
kWModelNumber
H
Height61/261/261/261/261/2888888
A
88888888888
C
31/231/231/231/231/2222222
B
3/43/43/43/43/43/43/43/43/43/43/4
WaterConn.
Approx.Shipping
Weight (lbs)
ELECTRIC
C
ABACK FRONTSIDE
W L
BInlet
OutletT&P H
Electrical Connections: 6—18kW—Either side or bottom 24—58kW-Left side or bottom.NOTE: Refer to pages 148/149 for GPH recovery information.
Commercial Energy Saver Electric 156/157Brute Vertical Round Water Heaters
Standard Features:■ 125 PSI ASME code glass-
lined tank■ Incoloy heating elements■ Internal fusing■ Galvanized steel jacket■ Magnesium anode rods■ Immersion thermostat■ Manual reset high limit■ Hinged door with
keyed lock■ Temperature and pressure
relief valve■ Channel iron skid base■ Hand-hole cleanout■ 180°F operation■ Three-year limited warranty■ Meets or exceeds ASHRAE
90.1b (Current Edition)
Optional Equipment Features:■ Low water cut-off■ Pilot lights■ Manual limiting switches■ Alarm bell■ Low or high pressure
switch■ Time clock (7 day or 24
hour)†
■ Safety door interlock■ Temperature and pressure
gauge■ Manhole cleanout (250
gallons and larger)■ 150 PSI working pressure■ Electronic sequencer
(36kW & higher)■ Shunt trip disconnect†
†Separate mounting
TEMPERATURE& PRESSURERELIEF VALVEHOT
WATEROUTLET
HANDHOLECLEANOUT
DRAIN
COLDWATERINLET TOP VIEW
6 1/4"
D
HINGED DOORTO ELECTRICALCOMPARTMENT
B
E
A
CPhotograph is of
VR-200-36
144162162162162162162162162162
1502002503004005006007008001000
VR-150-kWVR-200-kWVR-250-kWVR-300-kWVR-400-kWVR-500-kWVR-600-kWVR-700-kWVR-800-kWVR-1000-kW
72909090909090909090
383/4383/4403/4463/4523/4523/4603/4603/4603/4603/4
32323440464654525454
73/473/4191/221
221/2221/2241/2241/2241/2241/2
80090010501150130015001750187520002300
16171720232327272727
651/278928080929298104128
Vertical Round Energy Saver ModelsDIMENSIONS IN INCHES
ELECTRIC
Max.kW Load
@ 208V/240V
D
Depth
Max.kW Load@ 480V
144162162162360396396396396396
Max.kW Load**
Gal.Cap.
ModelNumber
B
Jacket
Diameter
A
Floor toTop ofHeater
C
Floor toCold Water
Inlet
E
Back of Heaterto Cold
Water Inlet
11/211/211/2222
21/221/221/221/2
WaterConn.
Approx.Shipping
Weight (lbs)
On 250 gallon model and larger dimensions: include channel iron legs (not shown).NOTE: Refer to pages 148/149 for GPH recovery information. All horizontal models must be with square jackets.**Vertical Round models above 90kW at 208v, 240v and 162kW at 480v exceed the capacity of a single control box and may require multiple control panels. Consult factory for specific detailsand optional construction.
Commercial Electric Energy Saver 158/159Brute Horizontal & Vertical Water Heaters
■ Meets ASHRAE 90.1b (CurrentEdition) energy efficiencystandards
■ Immersion thermostats■ Incoloy elements■ Internal fusing■ Glass-lined tank■ Built-in safety drain pan■ Magnesium anode rods■ Galvanized jacket■ Key hinged door with lock■ Temperature and pressure
relief valve■ 180°F temperature operation■ Hand hole cleanout■ Channel iron skid base■ 125 PSI ASME construction
■ UL listed■ Three year limited warrantyOptional Features■ Alarm bell■ Time clock (separate mounting)■ Electronic Sequencer■ Combination temperature and
pressure gauge■ Low or high pressure switch■ Pilot lights■ Manual limiting switches■ Safety door interlock■ Low water cut-off■ Shunt trip disconnect■ Man hole cleanout
(250 gallons and larger)■ 150 PSI ASME construction
Horizontal Square
Vertical Square
E
H
DHot Water Outlet
Hot Water Outlet Temperature & PressureRelief ValveExtra Panel Box
Cold Water Inlet
DrainDrain PanConnection
Electric Access
Man Hole CleanOut - 250 GAL.& Larger
Cold Water Inlet
Drain
Drain PanConnection
Hinged Door toElectric ControlCompartment
Temperature &PressureRelief Valve
Manhole
Extra panel box may be necessary forhigher than 72 kW. Consult Factory
Cold WaterInlet
Additional HeightIf Required
OptionalManholeEnd View
4"
2 1/8"
7"
8" 1,000-2,500 GALLONS
Extra panel box may be necessary for 72kW andabove on 208V and 144kW and above on 480V
1,000-2,500 GALLONS
HorizontalModels
VerticalModels
W
H
E
W N
K
D
J
Commercial Electric Energy Saver 160/161Brute Horizontal & Vertical Water Heaters
900900900900900
10001250150020002500
H-1000-(kW)H-1250-(kW)H-1500-(kW)H-2000-(kW)H-2500-(kW)
1381/41301/41261/41381/41441/4
541/4601/4661/4721/4781/4
123/413
121/2131/2133/4
48005600620080008600
21/23333
571/2631/2721/2751/2811/2
Horizontal Square Electric ModelsDIMENSIONS IN INCHES
ELECTRIC W
Max.kW Load
Gal.Cap.
ModelNumber
D
H E
WaterConn.Inlet
23333
WaterConn.Outlet
Approx.Shipping
Weight (lbs)
900900900900900
10001250150020002500
V-1000-(kW)V-1250-(kW)V-1500-(kW)V-2000-(kW)V-2500-(kW)
54641/2701/2761/2821/2
583/8641/2701/2761/2821/2
241/2231/4251/4271/429
23005600620080008600
293/16
323/16
353/16
383/16
413/16
1281321/21281/21401/21461/2
Vertical Square Electric ModelsDIMENSIONS IN INCHES
ELECTRIC W
Max.kW Load
Gal.Cap.
ModelNumber
D
H E
K
4248466066
N
4248466066
J
21/23333
WaterConnections
Approx.Shipping
Weight (lbs)
NOTE: Refer to pages 148/149 for GPH recovery information.
Commercial Energy Saver 162/163Oil-Powered Water Heaters
■ Vitraglas® lining■ Hydrojet® Total Performance System
(CF-70 model only)■ Factory installed dielectric waterway
fittings■ Non-CFC foam insulation■ Ceramic Fiber Combustion Chamber■ Easy, space-saving installation■ Protective magnesium anode rod
(CF-70 has 2 anode rods)■ Beckett burner■ T&P relief valve installed■ Low restriction brass drain valve
Photograph is ofCF-70-3Center Flue Rear Flue
F&G
B
J J
E E
DH A
D
F
G
A
H
CK
KC
B
7070
CF-70-3RF-70-3
6515/32
6311/16
24281/4
5615/32
64290410
61/28
Energy Saver ModelsDIMENSIONS IN INCHES
OIL A
Floor toFlue
Conn.Gal.Cap.
ModelNumber
B
JacketDia.
C
FlueSize
D
Floorto T&PConn.
113/16
123/16
E
Floor toBurner
Top
643/8207/8
F
Floor toCold Water
Conn.
643/864
G
Floor toHot Water
Conn.
114203/237
Recoveryat 100˚F
Rise*
633/8721/16
H
Floor toTop ofUnit
3231/32
381/8
J
Floor toAquastat
309/16
397/16
K
Depth
0.851.50/1.75
GPHFiringRate
MBTUH†Input
119210/245
Approx.Shipping
Weight (lbs)
NOTE: Does not include burner and controls.Water connections are 1" NPT for CF-70 and 11⁄4" NPT for RF-70.Power supply is 60 cycle, 120 Volt, single phase.*Based on manufacturers rated recovery efficiency.
†MBTUH = Thousand BTU/Hr.CF - Center FlueRF - Rear Flue
ModelNumber Part Numbers Description**CF-70-3RF-70-3RF-70-3
228-44392-05 BECKETT burner with single Aquastat @ 0.85 GPH228-44392-13 BECKETT burner with single Aquastat @ 1.50 GPH228-44392-15 BECKETT burner with single Aquastat @ 1.75 GPH
**All burners are 1-stage, 120V.
Commercial Energy Saver 164/165Multi-Flue Oil-Powered Water Heaters
■ Fiberglass insulation■ Vitraglas® lining■ Factory installed Hydrojet®
Sediment Reduction System■ Magnesium anode rods■ Hand hole cleanout
■ Dual immersion Aquastat■ ASME construction available
(80 & 100 models only)■ T&P relief valve installed■ Low restriction brass drain valve
NF
D, G, M
HA
L
E
J
N
L
D, G, M
A
F
E
J
N
DLG
F
E
A, J
CF-38 CF-80 CF-100Photograph is of
CF-80-3
ModelNumber
ASMEShippingWeight *
lbs.
G
Front / Rear Hot Water
Conn.
K
Depth**
B
JacketDia.
A
Floorto FlueConn.503/8723/4731/4
385/8447/8441/8
-875798
281/4301/4301/4
411/2623/8623/8
F
Front / RearCold Water
Conn.26
341/4295/8
503/8721/4721/4
J
Floor toHeater
Top
C
VentSize888
E
Floor toC/L BurnerOpening
123/8125/8113/8
H
Floor toTop Water
Conn. - -
723/4
L
Floor to Aquastat
35433/8367/8
M
Floor to Aquastat Avg Bulb
-623/8623/8
N
Floor toDrainValve 213/4277/8295/8
Std.Shipping Weight *
lbs.428850760
D
Floorto T&PConn.403/4623/8623/8
3880100
Gal.Cap.
CF-38-3CF-80-3CF-100-3
Multi-Flue Energy Saver ModelsDIMENSIONS IN INCHES
OIL
BURNER AND CONTROLS MUST BE PURCHASED WITH PRODUCTThe Top Water Connections for the CF-100 is 23" on center.
The Top Hot Water Connection is (761⁄2"), 1" higher than the Cold Water Connection (751⁄2").(A) ASME construction available. Example: CF-80-490-3A
CF - Center FlueRF - Rear FlueT - Top Water Conn.R - Rear Water Conn.F - Front Water Conn.
245,000280,000315,000350,000490,000560,000630,000700,000350,000420,000
CF-38-3
CF-80-3
CF-100-3
BTU/Hr.Input
1.752.002.252.503.504.004.505.002.503.00
Firing RateGPH
ModelNumber
Residential Indirect Energy Saver 166/167PowerStor2™ Water Heaters
■ Heat exchanger - double wall 11⁄2" O.D. glass coated(Vitraglas®) steel coil
■ Head loss - less than 5 ft. of head loss with flows upto 10 GPM
■ Vitraglas® lining■ Factory installed Hydrojet® Total Performance System■ Water Connections – 3/4" NPT factory installed true
dielectric fittings■ 2" Non-CFC foam insulation■ Surface-mount thermostat■ Two protective magnesium anode rods■ T&P relief valve installed■ Low restriction brass drain valve■ Limited lifetime warranty on tank and heat exchanger■ Hydronics Institute (I=B=R) rated■ Standard heat loss - less than 1/2°F per hour
(ASHRAE 90.1b current standard)Photograph is of
DW-2-50-L
B
D A
F
E
C
G
POTABLE WATER FITTINGS - 3/4" NPTANODES
COLD WATER INLET
HOT WATER INLET
TEMPERATURE ANDPRESSURE RELIEF VALVE
FROM BOILER SUPPLY3/4" NPT
TO BOILER RETURN3/4" NPT
DRAIN COUPLING - 3/4" NPT
SURFACE MOUNTEDTHERMOSTAT
41461/45959
38486475
DW-2-40-LDW-2-50-LDW-2-65-LDW-2-80-L
22222224
343/8401/8531/8527/8
417/8471/460
593/4
53/853/853/853/8
111/2111/2111/2111/2
180192221246
PowerStor2™ Energy Saver ModelsDIMENSIONS IN INCHES
D
Floor to WaterConn.
E
Floor toBoilerReturn
271/2271/2271/2271/2
F
Floor toBoilerSupply
C
Floor to T&P
Conn.
B
JacketDia.
A
Floor to Heater
TopGallon
Capacity
ModelNumber
G
Floor toThermostat
Approx.Shipping
Weight (lbs)
ModelNumber
I=B=R Water Heater Ratings
DW-2-40-LDW-2-50-LDW-2-65-LDW-2-80-L
First HourDelivery
123133148158
ContinuousDraw Rating
@ 135°F(Gal./Hr.)
98989898
StandbyHeat Loss
Rating(°F/Hr.)
1.10.90.70.6
MinimumHeat Req.
Rate(BTU/Hr.)
65,00065,00065,00065,000
MinimumHeat SourceFlow Rate(Gal./Min.)
8.08.08.08.0
ModelNumber
DOE Water Heater Performance
DW-2-40-LDW-2-50-LDW-2-65-LDW-2-80-L
140°F 115°F
Maximum FirstHour Rating
(Gal.) @
808796106
122129138148
140°F 115°F
ContinuousDraw Rating
(Gal./Min.) @
Approximate BoilerOutput Needed
For Ratings(BTU/Hr.)
0.90.90.90.9
1.61.61.61.6
55,00055,00055,00055,000
NOTES: These certified ratings were obtained with a heat source output rate and flowrate as specified and a 180° F boiler water supply temperature. Other results will beobtained under different conditions.
NOTES: Based on 200° F boiler water temperature and 50°F potable water inlettemperature.
Heat Exchanger Head LossGPMFt. of Hd. Loss
20.34
52.15
85.51
108.61
1212.40
Residential Indirect Energy Saver 168/169PowerStor Series® Water Heaters
■ Heat exchanger -single wall 11⁄2" O.D.glass coated(Vitraglas®) steel coil
■ Vitraglas® lining■ Factory installed
Hydrojet® TotalPerformance System
■ Water Connections –3/4" NPT factoryinstalled true dielectricfittings (SW-2-120Lhas 1" NPT waterconnection)
■ 1" NPT Connection forboiler supply andreturn
■ 2" Non-CFC foaminsulation
■ Immersion typeaquastat – accuratetemperature control
■ Three protectivealuminum anode rods
■ T&P relief valveincluded
■ Low restriction brassdrain valve
■ Limited lifetime yeartank and heatexchanger warranty
■ Hydronics Institute(I=B=R) rated
■ Stand-by heat loss isless than 1/2°F perhour (ASHRAE 90.1bcurrent standard)
Photograph is of aSW-2-65-L
DA F
EG
C
B
DA
F
EG
C
B
POTABLECONNECTIONS
ANODE RODS(TYPICAL)
(TYPICAL)
CON
SW-2-30-L
SW-2-40R-LSW-2-50R-LSW-2-65-LSW-2-80-LSW-2-120-L
3038486075116
SW-2-30-LSW-2-40R-LSW-2-50R-LSW-2-65-LSW-2-80-LSW-2-120-L
2222222224
281/4
335/8411/8461/4591/459
621/2
281/4343/8401/8531/8527/8553/4
343/8417/84760
593/4631/4
164177189218243369
271/2271/2271/2271/2271/2281/2
PowerStor Series® Energy Saver ModelsDIMENSIONS IN INCHES
C
Floor toT&P
Conn.
A
Floor toHeater
Top
B
JacketDia.
GallonCapacity
ModelNumber
D
Floor toWaterConn.
53/853/853/853/853/863/8
E
Floor toExchanger
Outlet
F
Floor toExchanger
Inlet
111/2111/2111/2111/2111/2111/2
G
Floor to Aquastat
Approx.Shipping
Weight (lbs)
ModelNumber 140°F 115°F
DOE Water Heater Performance
SW-2-30-LSW-2-40R-LSW-2-50R-LSW-2-65-LSW-2-80-LSW-2-120-L
Maximum FirstHour Rating
(Gal.) @
279288297306321357
429438447456470507
140°F 115°F4.24.24.24.24.24.2
6.76.76.76.76.76.7
ContinuousDraw Rating
(Gal./Min.) @
ApproximateBoiler OutputNeeded for
Ratings (BTU/Hr.)220,000220,000220,000220,000220,000220,000
ModelNumber
I=B=R Water Heater Ratings
SW-2-30-LSW-2-40R-LSW-2-50R-LSW-2-65-LSW-2-80-LSW-2-120-L
First HourDelivery
255260265275295325
ContinuousDraw Rating
@ 135°F(Gal./Hr.)
235235235235235235
StandbyHeat Loss
Rating(°F/Hr.)
1.21.10.90.70.60.4
HeatSource
Flow Rate(Gal./Min.)
13.713.713.713.713.713.7
HeatReq.Rate
(BTU/Hr.)157,000157,000157,000157,000157,000157,000
NOTES: These certified ratings were obtained with a heat source output rate andflow rate as specified and a 180° F boiler water supply temperature. Other resultswill be obtained under different conditions.
NOTES: Based on 200° F boiler water temperature and 50°F potable water inlettemperature.
Commercial Indirect Energy Saver 170/171PowerStor Series® Water Heaters
Photograph is of aSW-65C-5
■ Heat exchanger - single wall 11⁄2" O.D. glass coated(Vitraglas®) steel coil
■ Vitraglas® lining■ Factory installed Hydrojet® Total Performance System■ Water Connections – 1" NPT factory installed true
dielectric fittings ■ 1" NPT Connection for boiler supply and return■ 2" Non-CFC foam insulation■ Immersion type aquastat – accurate temperature control■ Three protective aluminum anode rods■ T&P relief valve included■ Low restriction brass drain valve■ 5 year tank and heat exchanger warranty■ Hydronics Institute (I=B=R) rated■ Stand-by heat loss is less than 1/2°F per hour
(ASHRAE 90.1b current standard)
DF
EG G
C CA
B
ANODE RODS(TYPICAL)
POTABLECONNECTIONS
(TYPICAL)
SW-65C-5SW-80C-5SW-120C-5
5873114
SW-65C-5SW-80C-5SW-120C-5
2224
281/4
591/459
621/2
531/16
527/8553/4
60593/4631/4
273300422
473/4473/4483/4
PowerStor Series® Energy Saver ModelsDIMENSIONS IN INCHES
C
Floor toT&P
Conn.
A
Floor toHeater
Top
B
JacketDia.
GallonCapacity
ModelNumber
D
Floor toWaterConn.
53/853/863/8
E
Floor toExchanger
Outlet
F
Floor toExchanger
Inlet
111/2111/2111/2
G
Floor to Aquastat
Approx.Shipping
Weight (lbs)
ModelNumber 140°F 115°F
DOE Water Heater Performance
SW-65C-5SW-80C-5SW-120C-5
Maximum FirstHour Rating
(Gal.) @
534546583
820834871
ApproximateBoiler OutputNeeded for
Rating (BTU/Hr.)420,000420,000420,000
ModelNumber
I=B=R Water Heater Ratings
SW-65C-5SW-80C-5SW-120C-5
First HourDelivery
405415445
ContinuousDraw Rating
@ 135°F(Gal./Hr.)
370370370
HeatSource
Flow Rate(Gal./Min.)
14.014.014.0
HeatReq.Rate
(BTU/Hr.)245,000245,000245,000
StandbyHeat Loss(°F/Hr.)
0.70.60.4
Note: Pressure Drop across commercial models is 2.6ft w.c. at 12 gpm for 200°F Boiler Supply.
Note: Pressure Drop across commercial models is 5.0 ft w.c. at 14.0 gpm . Theseratings were obtained with a heat source output rate of 245,000 BTU/hr at a heatsource flow of 14.0 gpm. Other results will be obtained under different conditions.
Indirect Energy Saver 172/173PowerStor SS® Water Heaters
■ Stainless steel heat exchanger—Single-wall 1"O.D. stainless steel coil.
■ Stainless steel tank and heat exchanger—Madefrom chromium molybdenum - titanium ferritic444 stainless steel alloy.
■ Immersed adjustable Honeywell aquastat—Fastacting immersion aquastat for automatictemperature control
■ Supply and return connections—3⁄4" NPT femaleconnections are located on the front for both theboiler supply and boiler return (1" NPT on RTV-119)
■ 2" Non-CFC foam insulation■ Potable water connections—3/4" NPT factory
installed dielectric fittings extend water heater lifeand eases installation (11⁄4" NPT on RTV-119)
■ T&P relief valve included■ Steel jacket■ Low restriction brass drain valve■ I=B=R Certified
Photograph is of RTV-40-L
EF
H
CD A
G
OUTLET
T&P
B
OUTLET
T&P
EF
GH
I
J
CAB
D
E L
K H
C
F
G
D
A
B
RTV-40-LRTV-52-LRTV-75-L
RTV-75D-L
RTV-120-L*Floor to Top Spare 3/4" NPT
Tank Connection is 413⁄4"Floor to Bottom Spare 3/4" NPT
Tank Connection is 17"
1 2 3 1
2
3
2424242431
351/4455/8637/8637/862
RTV-40-LRTV-52-LRTV-75-LRTV-75D-LRTV-120-L
5555
101/4
91/291/291/291/8161/4
245/8283/8281/4241/8443/8
———
361/8—
———
511/4—
8393117130315
PowerStorSS® Energy Saver ModelsDIMENSIONS IN INCHES
G
Floor toExchanger
Inlet
I
Floor toExchanger
Outlet (Upper)
————
423/4
K
Floor toSpare 3/4" HotWater Conn.
————
177/8
K
Floor toSpare 3/4" Cold
Water Conn.
F
Floor toExchanger
Outlet
E
Floor toCold Water
Conn.
351/2457/8641/8641/860
C
Floor toT&P
Conn.
B
JacketDia.
A
Floor toHeater
Top
40527575119
Gal.Cap.
ModelNumber
J
Floor toExchanger
Inlet (Upper)
351/2457/8641/8641/8481/2
D
Floor toHot Water
Conn.
191919
301/836
H
Floor toAquastat
Approx.ShippingWeight
Notes:1) Inlet water temperature based on 50°F.2) RTV-75D has 2 coils.3) RTV-119 supplied with 2 extra plugged tappings (see manual).
Height to top spare plug is 413⁄4".Height to bottom spare plug is 17".
4) RTV-119 equipped with steel casing.All potable water connections are 3/4" NPT (11⁄4" on RTV-119).3⁄4" Aquastat tapping.3⁄4" T&P valve tapping.
158200225270360
RTV-40-LRTV-52-LRTV-75-LRTV-75D-LRTV-120-L
I=B=R Water Heater Ratings
First HourDelivery
133165165215280
ContinuousDraw
@ 135°F(Gal./Hr.)
0.90.70.50.50.6
StandbyHeat Loss
Rating(°F/Hr.)
88,000113,000113,000150,000195,000
Min. HeatRequired
Rate(BTU/Hr.)
8.08.08.014.511.0
Min. HeatSource
Flow Rate(Gal./Min.)
ModelNumber
Note: These certified ratings were obtained with a heat output rate and flow rate asspecified and a 180°F boiler water supply temperature. Other results will beobtained under different conditions.
Residential Energy Saver 174/175Storage Tank Models
■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Water Connections – 3/4" NPT
factory installed true dielectricfittings (AST-120 has 1" NPTconnections)
■ 2" Non-CFC foam insulation■ Fully automatic controls■ Protective magnesium anode rod■ Boiler Return is 3/4"■ Thermal Feet■ T&P relief valve opening■ Brass drain/return valve (3/4")
TOP CONNECTIONS
DRAIN/BOILER RETURN
T&P(NOTPROVIDED)
BOILERSUPPLY
OUTLET
B
A C
D
E
Photograph is ofAST-50-6
405080119
AST-40-6AST-50-6AST-80-6AST-120-6
467/8465/16
587/8627/8
202224
281/4
477/8475/16
597/8637/8
31/16
31/16
31/16
31/16
103130183305
Energy Saver ModelsDIMENSIONS IN INCHES
C
Floor to Top Water Conn.
B
JacketDia.
A
Floor toHeater Top
GallonCapacity
ModelNumber
D
Floor to Drain/Boiler Return
8888
E
Outlet toBoiler Supply
Approx.ShippingWeight (lbs)
NOTES: Circulator pump and temperature pressure relief valve are NOT included. We recommend you use a stainless steel or bronze circulator pump and relief valve of your choice wheninstalling these storage tanks.
Commercial Energy Saver 176/177Storage Tank Models
■ Vitraglas® lining■ Optional ASME construction available■ 2" Non-CFC Foam insulation■ Water Connections – 2" NPT factory installed true
dielectric fittings (M-3-ST120R5A and M-3-ST200R5Ahave 21⁄2" connections)
■ Rear Connection – 2" NPT spud allows for rearwater connection(M-3-ST120R5 and M-3-ST120R5A only)
■ Hand hole cleanout(M-3-ST120R5 has optional hand hole cleanout)
■ Two magnesium anode rods■ Steel tank■ 1" Side T&P valve opening■ 3/4" NPT Aquastat connection■ Low restriction brass drain valve
B
A
FRONT REAR
DC
EF
GH
J
Photograph is ofM-3-ST80R5
8080119119200
M-3-ST80R5M-3-ST80R5A*M-3-ST120R5M-3-ST120R5A*M-3-ST200R5A*
2424282832
583/4583/4621/2621/277
521/2521/2553/4553/466
593/4593/4631/2631/278
192192312366541
91/491/491/491/4111/4
Energy Saver ModelsDIMENSIONS IN INCHES
C
Floor toT&P Valve
A
Floor toHeater
Top
B
JacketDia.
GallonCapacity
ModelNumber
D
Floor toHot Water
Conn.
——55
—
J
Floor toRear Water
Conn.
2(F&T)2(F&T)
2(F&T), 2(R)21/2(F&T), 2(R)
21/2(F&T)
WaterConn.Size†
141/4141/4141/4141/4161/4
E
Floor to Aquastat
Top Circ. Conn.
F
Floor to Bottom
Circ. Conn.
43/443/455
63/4
G
Floor toDrain Valve
71/471/4—71/291/4
H
Floor toHand Hole Cleanout
Approx.Shipping
Weight (lbs)
HOT OUTLET
HOT OUTLET
COLD INLET
COLD INLET
COLD INLET
SHUTOFFVALVE
SHUTOFFVALVE
SHUTOFFVALVE
CHECKVALVECHECK
VALVE
T & PT & P
T & P
T & PT & P
T & P
THERMOSTAT THERMOSTAT AQUASTAT
RECIRCULATINGLOOP
ALL BRONZECIRCULATOR ALL BRONZE
CIRCULATORALL BRONZECIRCULATOR
HH
C
BOILERTANKLESSCOIL
RECIRCULATINGLOOP
ALL BRONZECIRCULATOR
ALL BRONZECIRCULATOR
AQUASTATAQUASTAT
HOT OUTLET
*Meets ASME Code† (F) = Front water connections
(R) = Rear water connections(T) = Top water connections
Commercial Bare Unjacketed 178/179Energy Saver Storage Tanks
■ Vitraglas® lining■ Optional ASME construction available (BST-200R5A only)■ Water Connections – 2" NPT factory installed true
dielectric fittings (BST-200R5Ahave 21⁄2" connections)
■ Rear Connection – 2" NPT spudallows for rear water connection(BST-120R5 only)
■ Hand hole cleanout(BST-120R5 has optionalhand hole cleanout)
■ Two magnesium anode rods■ 1" Side T&P valve opening■ 3/4" NPT Aquastat connection■ Low restriction brass drain valve
A
B
C
E F
G H
D
HOT WATEROUTLET
ANODEROD
ANODEROD
D C
E
F G
A
B
J
HOT WATEROUTLET
ANODEROD
ANODEROD
D
C
E F H G
A
B
HOT WATEROUTLET
ANODEROD
ANODEROD
BST-80R5 BST-120R5 BST-200R5A
Photograph is ofBST-120R5
80119119
BST-80R5BST-120R5BST-200R5A*
202428
581/4621/4761/2
521/2545/16
653/4
58621/4761/2
182302531
813/16
911
Bare Unjacketed Energy Saver ModelsDIMENSIONS IN INCHES
Meet or exceed ASHRAE 90.1b (current standard) CEC Listed
C
Floor toT&P Valve
A
Floor toHeater
Top
B
JacketDia.
GallonCapacity
ModelNumber
D
Floor toHot Water
Conn.
—9
—
J
Floor toRear Water
Conn.
2(F)2(F), 2(R)
21/2(F)
WaterConn.Size†
1313/16
1416
E
Floor to Aquastat
Top Circ. Conn.
F
Floor to Bottom
Circ. Conn.
45/16
41/261/2
G
Floor toDrain Valve
613/16
—9
H
Floor toHand Hole Cleanout
Approx.Shipping
Weight (lbs)
*Meets ASME Code† (F) = Front water connections
(R) = Rear water connections
Commercial Large Volume Energy Saver 180/181Jacketed & Insulated Storage Tank Models
■ Vertical or horizontal construction■ Water Connections – two female 3"
NPT fittings are located on the frontfor ease of service and installation
■ ASME construction■ Vitraglas® lining■ Hydrojet® HC – optional■ 2" High density insulation■ Protective magnesium anode rod(s)■ ASME tested and certified to
125 PSI■ Steel jacket■ Designed for storage of potable
water up to 180°F■ 5-year tank warranty
3" NPT
Hot Outlet
C
A
Anode3/4" NPTAquastat
8"
7"
1" NPT Drain
B
Anode1 1/4"NPTRelief
Photograph is ofNV310JG5A
2403103404655007651040
N*240J†5AN*310J†5AN*340J†5AN*465J†5AN*500J†5AN*765J†5AN*1040J†5A
91849112079114147
539710760967117616022003
Vertical and Horizontal Energy Saver ModelsDIMENSIONS IN INCHES
34404040525252
B
JacketDia.
Actual U.S.Capacity
Gal.
2603443755025728461128
Nominal U.S.Capacity
Gal.Model
NumberVert.
Height
8982891185959145
Horiz.Length
A
191/2212121242424
C
Floor to Inlet
21/221/221/221/2333
Hot WaterOutlet Conn.
Approx. ShippingWeight (lbs)
@125 PSI
† = Tank Lining/ConstructionG = Vitraglas®
D = Double Vitraglas®
E = EpoxyS = Stainless SteelExample of full model number when ordering (NV240JG5A)
Factory Options Include:
** Note: Manway inspection port is provided as standard equipment on epoxy lining.Options must be specified when ordering
• Epoxy Lining**• Double Vitraglas®
• Manway (4" by 6")• Hand hole (12" by 16")
• Extra TappingsSizes must be specifiedwhen ordering
• Stainless Steelconstruction
• 150 psi • Hydrojet HC®
* = Tank OrientationV = VertcalH = HorizontalSaddles required for horizontal models.Use Bare Tank Diameter for saddle sizes.
Commercial Large Volume Energy Saver 182/183Unjacketed & Uninsulated Storage Tank Models
■ ASME construction■ Glass lined interior■ Hydrojet® HC – optional■ Magnesium anode rod(s) – for protection and longer service life■ ASME tested and certified to 125 PSI■ Red Oxide Primer – completely covers exterior of tank■ 6" skirt height (vertical tank) allows for easier access to areas under the tank■ Lifting Lugs■ Designed for storage of potable water up to 180°F■ 5-year tank warranty
TANK SADDLEDIMENSIONAL DATAfor Horizontal Installations(two or more required)
9"
E D
C
6"
F F6"
3" NPT3" NPT
3" NPT
9"
8"
7"
6"
3/4" NPTAUXILIARY
1 1/4" NPTRELIEF
1 1/4" NPTRELIEF
B
ANODE
3/4" NPTAQUASTAT
3/4" NPTAQUASTAT
ANODE
E NPT
1" NPTDRAIN
E NPT
DRAIN
E HOT OUTLET
A
D
Dimension 30 36 42 48
Tank Diameter
FE
216
256
296
346
Vertical
Horizontal
Commercial Large Volume Energy Saver 184/185Unjacketed & Uninsulated Storage Tank Models
3030303030363636363636
175210240280320310340360415465515
N*175N†5AN*210N†5AN*240N†5AN*280N†5AN*320N†5AN*310N†5AN*340N†5AN*360N†5AN*415N†5AN*465N†5AN*515N†5A
698191105117849196108120132
63758599111788590102114126
11111111111
21/221/221/221/221/221/221/221/221/221/221/2
284371408460504581624655729802876
221/2281/2331/2401/2461/230
331/236424854
Vertical and Horizontal Energy Saver ModelsDIMENSIONS IN INCHES
Drain
TappingsC
Horz.OverallLength
191/2191/2191/2191/2191/2212121212121
D
Floor toCold Water
Inlet
A
Vert.Height
B
Bare TankDia.
Gal.Cap.
ModelNumber E F
Approx.Shipping
Weight (lbs)@125 PSI
42424242424242484848484848
4354605055756457207905005806757658601040
N*435N†5AN*460N†5AN*505N†5AN*575N†5AN*645N†5AN*720N†5AN*790N†5AN*500N†5AN*580N†5AN*675N†5AN*765N†5AN*860N†5AN*1040N†5A
8791991131231351457990102114126147
818593105117129139738496108120141
1111111111111
3333333333333
762791848934102011061192102511451275140515351796
311/2331/2371/2431/2491/2551/2611/2271/23339455163
Vertical and Horizontal Energy Saver ModelsDIMENSIONS IN INCHES
Drain
TappingsC
Horz.OAL
221/2221/2221/2221/2221/2221/2221/2242424242424
D
Floor toCold Water
Inlet
A
Vert.Height
B
Dia.Gal.Cap.
ModelNumber E F
Approx.Shipping
Weight (lbs)@125 PSI
* = Tank OrientationV = VerticalH = HorizontalSaddles required for horizontal models.Use Bare Tank Diameter for saddle sizes.Example of full model number when ordering (NV175NG5A)
Factory Options Include:
** Note: Manway inspection port is provided as standard equipment on epoxy lining.Options must be specified when ordering
• Epoxy Lining**• Double Vitraglas®
• Manway (4" by 6")• Hand hole (12" by16")
• Saddles• Extra Tappings
Sizes must be specifiedwhen ordering
• Stainless Steelconstruction
• 150 psi • Hydrojet HC®
† = Tank Lining/ConstructionG = Vitraglas®
D = Double Vitraglas®
E = EpoxyS = Stainless Steel
Commercial Large Volume Energy Saver 186/187Topcoat Storage Tank Models
■ ASME construction■ Bradford White tanks with sprayed-on rigid insulation with acrylic topcoat
exceeds ASHREE 90.1 requirements with 2.25" of high-density polyurethanefoam with an “R” value of R-16. SPF meets requirements for California Title24. Bradford White spray foam insulation has the best fire spread rating witha class I foam with less than a 25-flame spread rating suitable for boilerroom applications.
■ The 100% acrylic topcoat is formulated for applications over spraypolyurethane foam and is designed to withstand extreme weather and a fullrange of environmental conditions.
■ The two component polyurethane foam is applied at ambient temperatures,directly to the vessel in the desired thickness. The 2-coat topcoat is thenapplied from a high-pressure spray gun and allowed to dry betweenapplications.
■ Alternative for insulated and steel jacket■ Any tank size or shape can be insulated■ Field repairable
3" NPT
"E" Hot Out
D
A
6"
3/4" NPTAquastat3" NPT
8"
3/4" NPTAquastat
"B" - Drain
7"
B
Anode1 1/4" NPTRelief
"A" Hot Out
‘E’ NPT
3" NPT1" NPTDrain 3" NPT
Anode
C
F
HT
F‘E’ NPT
9"
1 1/4" NPTRelief
3/4" NPTAuxiliary
3/4" NPTAquastat
Spray Polyurethane Foam: Specific Gravity: 1.17 – 1.19Viscosity: 800 – 1300Density: @ 2" 2.10 – 2.35
@ 4" 1.88 – 1.99Closed Cell Content: >90%K-Factor, initial: 0.155 – 0.170Permeance: 2.91 (perms)
2.99 (perm inch)Dimensional Stability: +3.3 to +8.2 - Dry Age 28 days (158°F, Dry)
-0.37 to –0.96 – Freeze 14 day (-20°F)Flame Spread: 25 - ASTM E-84Smoke Development: 450R Value: 7.2/ inch Max. Thickness: 4"
Acrylic Coating: Topcoat: 2 coats white, 25 milsTexture: SmoothGrade: Spray or RollBase: 100% AcrylicSolids by weight: 66% (+/-3) Solids by volume: 55% (+/-3)Weight per gallon: 11.65 (+/-.2)Tensile Strength: 300 psi (+/-25)Elongation: 260% (+/-25)Durometer hardness: 62 Shore A (+/-2)Tear Resistance: 85 lbs/ in.Permeance: 11 U.S. Perms @ 20 milsViscosity: 110 K.U. (+/-8)Codes/ Approvals: Energy Star, ICC, UL, ASTM D6083Reflectivity: New 85%, Aged 78%Emmisivity: .89
Vertical
Horizontal
Commercial Large Volume Energy Saver 188/189Topcoat Storage Tank Models
303030303036363636363642
175210240280320310340360415465515435
N*175T†5AN*210T†5AN*240T†5AN*280T†5AN*320T†5AN*310T†5AN*340T†5AN*360T†5AN*415T†5AN*465T†5AN*515T†5AN*435T†5A
711/2831/2931/21071/21191/2861/2931/2981/21101/21221/21341/2891/2
68809010411683909510711913186
Vertical and Horizontal Energy Saver ModelsDIMENSIONS IN INCHES
C
Horz.Length
191/2191/2191/2191/2191/221212121212121
D
Floor toCold Water
Inlet
111111111111
Drain
21/221/221/221/221/221/221/221/221/221/221/221/2
E
221/2281/2331/2401/2461/230
331/236424854
311/2
F
Tappings
353535353541414141414147
B
OverallDia.
A
Vert.Height Bare Tank
Dia.
314401438490534611654685759832906792
Glass LinedWeight 125 psi*
ASME (lbs)Gal.Cap.
ModelNumber
424242424242484848484848
460505575645720790500580675765860
104O
N*460T†5AN*505T†5AN*575T†5AN*645T†5AN*720T†5AN*790T†5AN*500T†5AN*580T†5AN*675T†5AN*765T†5AN*860T†5AN*1040T†5A
931/21011/21131/21251/21371/21471/2811/2921/21041/21161/21281/21491/2
90981101221341447889101113125146
Vertical and Horizontal Energy Saver ModelsDIMENSIONS IN INCHES
C
Horz.Length
221/2221/2221/2221/2221/2221/2221/22424242424
D
Floor toCold Water
Inlet
111111111111
Drain
333333333333
E
331/2371/2431/2491/2551/2611/2271/23339455163
F
Tappings
474747474747535353535353
B
OverallDia.
A
Vert.Height Bare Tank
Dia.
821878964105011361222105511751305143515651826
Glass LinedWeight 125 psi*
ASME (lbs)Gal.Cap.
ModelNumber
Sizes must be specified when ordering• Stainless Steel construction• 150 psi ** Note: Manway inspection port is provided asstandard equipment on epoxy lining.Options must be specified when ordering
† = Tank Lining/ConstructionG = Vitraglas®
D = Double Vitraglas®
E = EpoxyS = Stainless SteelExample of full model number when ordering(NV240TG5A)Note: Please be advised that all tank sizes areavailable for this process.
* = Tank OrientationV = VerticalH = Horizontal
Factory Options Include:• Epoxy Lining**• Double Vitraglas®
• Manway (4" by 6")• Hand hole (12" by 16")• Extra Tappings
Residential Gas Energy Saver FVIR 190/191Combi1™ Water Heater System
Photo is ofC-SW2-504T10FBN
C
AJ
H
E
F
D & G
The Combi1™ FVIR Defender SafetySystem® Models Feature:■ Bradford White ICON
System™
■ Advanced ScreenLok®
Technology flame arrestordesign
■ Resettable thermal switch■ Pedestal base■ Heat Exchanger—Single
wall 11⁄2" O.D. glass coated(Vitraglas®) steel coil
■ Provides domestic hotwater and space heating inone system
■ Low Heat Exchanger HeadLoss—Up to 10 GPM flow,with less than 5 ft. of head loss
■ Vitraglas® lining■ Factory installed Hydrojet®
Total Performance System■ Water Connections – 3/4"
NPT factory installed truedielectric fittings
■ 1" Front NPT supply andreturn connections
■ 2" Non-CFC foaminsulation
■ Two protectiveanode rods
■ Integrated Mixing Device■ T&P relief valve installed■ Low restriction brass drain
valve
K
B
PLUG TYPEANODE
65,00045C-SW2-504T10FBN(LP) 591/4 22 50 236
Combi1™ Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b(current standard) CEC Listed
80% Recovery Efficiency
A
Floor toFlue
Conn.
13
E
Floor toGas
Conn.
311/2
F
Floor toExchanger
Inlet
563/8
H
Floor toTop ofHeater
603/8
J
Floor toTop Water
Conn.
241/2
K
Depth
50
G
Floor toExchanger
Outlet
B
JacketDia.
InputBTU/Hr.
70
GPHRecovery
90°F Rise*Gal.Cap.
ModelNumber
D
Floor toT&P
Conn.
4
C
VentSize
Approx.Shipping
Weight (lbs)
All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.
Heat Exchanger Head Loss
GPMFeet of Head Loss
20.07
50.71
82.3
104.0
126.31
(LP) LP Gas Inputs GPH Rec. 90°F Rise
C-SW2-504T10FSX 61,000 BTU/Hr. 66
All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.CAEF is .55 and CAAFLUE % is 80.0.
Heat Exchanger Values*
Supply TemperatureReturn TemperatureDifferentialFlow RateNet Output
140°F120°F20°F
4.1 GPM35,500 BTU/Hr.
120°F100°F20°F
4.6 GPM39,500 BTU/Hr.
100°F80°F20°F
4.6 GPM39,500 BTU/Hr.
*These values were obtained using 180°F stored tank temperature.Net Output is the space heating capacity based on normal piping and pickupallowance of 15%.Actual values may vary based on circulator flow rate, number of zones, waterand space heating demands. Numbers subject to change.
Residential Gas Energy Saver 192/193Combi1™ Water Heater System
C
AJ
H
E
F
D & G
The Combi1™ Models Feature:■ Bradford White ICON
System™
■ Heat Exchanger—Singlewall 11⁄2" O.D. glass coated(Vitraglas®) steel coil
■ Provides domestic hotwater and space heatingin one system
■ Low Heat Exchanger HeadLoss—Up to 10 GPMflow, with less than 5 ft.of head loss
■ Vitraglas® lining■ Factory installed
Hydrojet2™ TotalPerformance System
■ Water Connections – 3/4"NPT factory installedtrue dielectric fittings
■ 1" Front NPT supplyand returnconnections
■ 2" Non-CFC foaminsulation
■ Two protectiveanode rods
■ Integrated Mixing Device■ T&P relief valve installed■ Low restriction brass
drain valve
K
B
PLUG TYPEANODE
Photo is ofC-SW2-75T10BN
76,00072C-SW2-75T10BN(LP) 633/4 26 53 326
Combi1™ Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b(current standard) CEC Listed
80% Recovery Efficiency
A
Floor toFlue
Conn.
16
E
Floor toGas
Conn.
341/2
F
Floor toExchanger
Inlet
601/4
H
Floor toTop ofHeater
641/4
J
Floor toTop Water
Conn.
281/2
K
Depth
53
G
Floor toExchanger
Outlet
B
JacketDia.
InputBTU/Hr.
81
GPHRecovery
90°F Rise*Gal.Cap.
ModelNumber
D
Floor toT&P
Conn.
4
C
VentSize
Approx.Shipping
Weight (lbs)
All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.CAEF is .55 and CAAFLUE % is 80.0.
(LP) LP Gas Inputs GPH Rec. 90°F Rise
C-SW2-75T10SX 76,000 BTU/Hr. 81
Heat Exchanger Head Loss
GPMFeet of Head Loss
20.07
50.71
82.3
104.0
126.31
Heat Exchanger Values*
Supply TemperatureReturn TemperatureDifferentialFlow RateNet Output
140°F120°F20°F
4.1 GPM35,500 BTU/Hr.
120°F100°F20°F
5.6 GPM47,500 BTU/Hr.
100°F80°F20°F
5.6 GPM47,500 BTU/Hr.
*These values were obtained using 180°F stored tank temperature.Net Output is the space heating capacity based on normal piping and pickupallowance of 15%.Actual values may vary based on circulator flow rate, number of zones, waterand space heating demands. Numbers subject to change.
Residential Gas Energy Saver FVIR 194/195Combi2™ Water Heater System
Photo is ofC-DW2-504T10FBN
C
AJ
H
E
F
D & G
The Combi2™ FVIR Defender SafetySystem® Models Feature:■ Bradford White ICON
System™
■ Advanced ScreenLok®
Technology flame arrestordesign
■ Resettable thermal switch■ Pedestal base■ Heat Exchanger—Double
wall 11⁄2" O.D. glass coated(Vitraglas®) steel coilensures separation ofpotable water and heatingfluid
■ Provides domestic hotwater and space heating inone system
■ Low Heat Exchanger HeadLoss—Up to 10 GPM flow,with less than 5 ft. of headloss
■ Vitraglas® lining■ Factory installed Hydrojet®
Total Performance System■ Water Connections – 3/4"
NPT factory installed truedielectric fittings
■ 3/4" Front NPT supply andreturn connections
K
B
■ 2" Non-CFC foam insulation■ Two protective anode rods■ Integrated Mixing Device■ T&P relief valve installed■ Low restriction brass drain valve
65,00045C-DW2-504T10FBN(LP) 591/4 22 50 238
Combi2™ Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b(current standard) CEC Listed
80% Recovery Efficiency
A
Floor toFlue
Conn.
13
E
Floor toGas
Conn.
277/8
F
Floor toExchanger
Inlet
563/8
H
Floor toTop ofHeater
603/8
J
Floor toTop Water
Conn.
241/2
K
Depth
50
G
Floor toExchanger
Outlet
B
JacketDia.
InputBTU/Hr.
70
GPHRecovery
90°F Rise*Gal.Cap.
ModelNumber
D
Floor toT&P
Conn.
4
C
VentSize
Approx.Shipping
Weight (lbs)
Heat Exchanger Head Loss
GPMFeet of Head Loss
20.34
52.15
85.51
108.61
1212.40
(LP) LP Gas Inputs GPH Rec. 90°F Rise
C-DW2-504T10FSX 61,000 BTU/Hr. 66
All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.CAEF is .55 and CAAFLUE % is 80.0.
Heat Exchanger Values*
Supply TemperatureReturn TemperatureDifferentialFlow RateNet Output
140°F120°F20°F
2.3 GPM20,000 BTU/Hr.
120°F100°F20°F
3.4 GPM29,000 BTU/Hr.
100°F80°F20°F
4.4 GPM38,000 BTU/Hr.
*These values were obtained using 180°F stored tank temperature.Net Output is the space heating capacity based on normal piping and pickupallowance of 15%.Actual values may vary based on circulator flow rate, number of zones, waterand space heating demands. Numbers subject to change.
Residential Gas Energy Saver 196/197Combi2™ Water Heater System
Photo is ofC-DW2-75T10BN
The Combi2™ Models Feature:■ Bradford White ICON
System™
■ Heat Exchanger—Doublewall 11⁄2" O.D. glasscoated (Vitraglas®) steelcoil ensures separationof potable water andheating fluid
■ Provides domestic hotwater and space heatingin one system
■ Low Heat ExchangerHead Loss—Up to 10GPM flow, with less than5 ft. of head loss
■ Vitraglas® lining
■ Factory installedHydrojet2™ TotalPerformance System
■ Water Connections – 3⁄4"NPT factory installedtrue dielectric fittings
■ 3/4" Front NPT supplyand return connections
■ 2" Non-CFC foaminsulation
■ Two protective anoderods
C
AJ
H
E
F
D & G
K
B
PLUG TYPEANODE
■ Integrated Mixing Device■ T&P relief valve installed■ Low restriction brass drain valve
76,00072C-DW2-75T10BN(LP) 633/4 26 53 328
Combi2™ Atmospheric Vent Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b(current standard) CEC Listed
80% Recovery Efficiency
A
Floor toFlue
Conn.
16
E
Floor toGas
Conn.
307/8
F
Floor toExchanger
Inlet
601/4
H
Floor toTop ofHeater
641/4
J
Floor toTop Water
Conn.
281/2
K
Depth
53
G
Floor toExchanger
Outlet
B
JacketDia.
InputBTU/Hr.
81
GPHRecovery
90°F Rise*Gal.Cap.
ModelNumber
D
Floor toT&P
Conn.
4
C
VentSize
Approx.Shipping
Weight (lbs)
Heat Exchanger Head Loss
GPMFeet of Head Loss
20.34
52.15
85.51
108.61
1212.40
(LP) LP Gas Inputs GPH Rec. 90°F Rise
C-DW2-75T10SX 76,000 BTU/Hr. 81
Heat Exchanger Values*
Supply TemperatureReturn TemperatureDifferentialFlow RateNet Output
140°F120°F20°F
2.3 GPM20,000 BTU/Hr.
120°F100°F20°F
3.4 GPM29,000 BTU/Hr.
100°F80°F20°F
4.4 GPM38,000 BTU/Hr.
*These values were obtained using 180°F stored tank temperature.Net Output is the space heating capacity based on normal piping and pickupallowance of 15%.Actual values may vary based on circulator flow rate, number of zones, waterand space heating demands. Numbers subject to change.
All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.CAEF is .55 and CAAFLUE % is 80.0.
Residential Gas Energy Saver 198/199Combi1™ TTW® Water Heater System
The Combi1™ TTW® FVIR Defender Safety System®
Models Feature (50 gallon model only):■ Advanced ScreenLok® Technology flame
arrestor design■ Flammable vapor sensorAll Combi1™ TTW® Models Feature:■ Heat Exchanger—Single wall 11⁄2" O.D.
glass coated (Vitraglas®) steel■ Provides domestic hot water and space
heating in one system■ Low Heat Exchanger Head Loss—Up to 10
GPM flow, with less than 5 ft. of head loss■ Vitraglas® lining■ Integrated Mixing Device■ Factory installed Hydrojet® Total
Performance System■ Electronic gas control valve with spark to
pilot ignition
■ Power vented■ Horizontal venting■ Vertical venting■ Water Connections – 3/4" NPT factory
installed true dielectric fittings ■ 1" NPT front supply and return connections■ 2" Non-CFC foam insulation■ Two protective anode rods■ T&P relief valve installed■ Low restriction brass drain valve■ Pedestal base
Photograph is of aC-SW2-TW50T10FBN
C
AJ
H
E
F
D & G
K B
67,00076,000
4572
C-SW2-TW50T10FBN (LP)C-SW2-TW75T10BN (LP)
657/8693/4
2226
501/853
243333
Combi1™ Power Vented Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b(current standard) CEC Listed
80% Recovery Efficiency
A
Floor toVent
Conn.
113/415
E
Floor toGas
Conn.
311/2341/2
F
Floor toExchanger
Inlet
563/8601/4
H
Floor toTop ofHeater
603/8641/4
J
Floor toTop Water
Conn.
263/431
K
Depth
5053
G
Floor toExchanger
Outlet
B
JacketDia.
InputBTU/Hr.
Gal.Cap.
7282
GPHRecovery
90°F Rise*Model
Number
D
Floor toT&P
Conn.
3 or 43 or 4
C
VentSize
Approx.Shipping
Weight (lbs)
All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.110 V.A.C Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes.
Heat ExchangerHead Loss
GPM
2581012
Ft. ofHd. Loss
0.070.712.34.06.31
3"Vent Pipe
4"Vent Pipe
C-SW2-TW50C-SW2-TW75
60 ft.** 7 ft.55 ft.50 ft.45 ft.
180 ft. 15 ft.175 ft.170 ft.165 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
Subtract 5ft. for each additional 90° elbow.†Consult the I&O manual for Four or more elbows.**C-SW2-TW75 maximum 3" vent length is 50ft.
(LP) LP Gas Inputs GPH Rec. 90°F Rise
C-SW2-TW50T10FSX 60,000 BTU/Hr. 65C-SW2-TW75T10SX 75,500 BTU/Hr. 81
Heat Exchanger Values*
Supply TemperatureReturn TemperatureDifferentialFlow Rate (TW50)Net Output (TW50)Flow Rate (TW75)Net Output (TW75)
140°F120°F20°F
4.1 GPM35,000 BTU/Hr.
4.1 GPM35,000 BTU/Hr.
120°F100°F20°F
4.6 GPM39,500 BTU/Hr.
5.6 GPM47,500 BTU/Hr.
100°F80°F20°F
4.6 GPM39,500 BTU/Hr.
5.6 GPM47,500 BTU/Hr.
*These values were obtained using 180°F stored tank temperature.Net Output is the space heating capacity based on normal piping and pickupallowance of 15%.Actual values may vary based on circulator flow rate, number of zones, waterand space heating demands. Numbers subject to change.
Residential Gas Energy Saver 200/201Combi2™ TTW® Water Heater System
The Combi2™ TTW® FVIR Defender Safety System®
Models Feature (50 gallon model only):■ Advanced ScreenLok® Technology flame
arrestor design■ Flammable vapor sensorAll Combi2™ TTW® Models Feature:■ Heat Exchanger—Double wall 11⁄2" O.D. glass
coated (Vitraglas®) steel coil ensuresseparation of potable water and heating fluid
■ Provides domestic hot water and hydronicheating in one system
■ Low Heat Exchanger Head Loss—Up to 10GPM flow, with less than 5 ft. of head loss
■ Integrated Mixing Device■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System
■ Electronic gas control valve with spark topilot ignition
■ Power vented■ Horizontal venting■ Vertical venting■ Water Connections – 3/4" NPT factory
installed true dielectric fittings ■ 3/4" Front supply and return connections■ 2" Non-CFC foam insulation■ Two protective anode rods■ T&P relief valve installed■ Low restriction brass drain valve■ Pedestal base
Photograph is of aC-DW2-TW50T10FBN
C
AJ
H
E
F
D & G
K B
67,00076,000
4572
C-DW2-TW50T10FBN (LP)C-DW2-TW75T10BN (LP)
657/8693/4
2226
501/253
245335
Combi2™ Power Vented Energy Saver ModelsDIMENSIONS IN INCHES
NATURAL GAS AND LIQUID PROPANE GAS MODELS
Meet or exceed ASHRAE 90.1b(current standard) CEC Listed
Recovery Efficiency ranging up to 80% (Minimum)
A
Floor toVent
Conn.
113/415
E
Floor toGas
Conn.
28307/8
F
Floor toExchanger
Inlet
563/8601/4
H
Floor toTop ofHeater
603/8641/4
J
Floor toTop Water
Conn.
263/431
K
Depth
501/853
G
Floor toExchanger
Outlet
B
JacketDia.
InputBTU/Hr.
Gal.Cap.
7282
GPHRecovery
90°F Rise*Model
Number
D
Floor toT&P
Conn.
33
C
VentSize
Approx.Shipping
Weight (lbs)
All propane models feature a Titanium Stainless Steel propane burner. For propane (LP) models change suffix “BN” to “SX”.*Based on manufacturers rated recovery efficiency.110 V.A.C Required for Power Venting / 110 V.A.C., 60HZ, 3.1 Amperes.
Heat ExchangerHead Loss
GPM
2581012
Ft. ofHd. Loss
0.342.155.518.6112.40
3"Vent Pipe
4"Vent Pipe
C-DW2-TW50C-DW2-TW75
60 ft.** 7 ft.55 ft.50 ft.45 ft.
180 ft. 15 ft.175 ft.170 ft.165 ft.
Max. Equivalent LengthMin. Equivalent LengthNumber 1of 290° Elbows† 3
Subtract 5ft. for each additional 90° elbow.†Consult the I&O manual for Four or more elbows.**C-DW2-TW75 maximum 3" vent length is 50ft.
(LP) LP Gas Inputs GPH Rec. 90°F Rise
C-DW2-TW50T10FSX 60,000 BTU/Hr. 65C-DW2-TW75T10SX 75,500 BTU/Hr. 81
Heat Exchanger Values*
Supply TemperatureReturn TemperatureDifferentialFlow RateNet Output
140°F120°F20°F
2.3 GPM20,000 BTU/Hr.
120°F100°F20°F
3.4 GPM29,000 BTU/Hr.
100°F80°F20°F
4.4 GPM38,000 BTU/Hr.
*These values were obtained using 180°F stored tank temperature.Net Output is the space heating capacity based on normal piping and pickupallowance of 15%.Actual values may vary based on circulator flow rate, number of zones, waterand space heating demands. Numbers subject to change.
Residential Oil Energy Saver 202/203Combi2™ Water Heater System
Photo is ofC-DW1-70L6OF
■ Heat exchanger – Double wall 11⁄2" glasscoated (Vitraglas®) steel ensures separationof potable water and heating fluid
■ Provides domestic hot water and hydronicheating in one system
■ Low heat exchanger head loss - Less than5ft. of head loss with flow up to 10GPM.
■ Vitraglas® lining■ Factory installed Hydrojet® Total
Performance System■ Beckett burner with single aqua stat■ Water connections – 3/4" NPT factory
installed true dielectric fittings ■ 1" Non-CFC foam insulation■ Two protective aluminum anode rods■ Integrated Mixing Device■ T&P relief valve installed■ Low restriction brass drain valve
C
K
A H
E
D & F
GL
J
B
I
119,00068C-DW1-70L6OF 0.85 663/4 24 6 573/8 299†337/8573/8
Combi2™ Atmospheric Vent Energy Saver ModelDIMENSIONS IN INCHES
Meet or exceed ASHRAE 90.1b(current standard) CEC Listed
Recovery Efficiency ranging up to 76%
A
Floorto FlueConn.
B
JacketDia.
Recovery90°F Rise*
GPHFiringRate
BTU/Hr.Input
Gal.Cap.
127
U.S.GPH
ModelNumber
C
VentSize
D
Floor toT&P
351/4
F
Floor toExchanger
Outlet
G
Floor toExchanger
Inlet
L
Floor toControl
Thermostat
68
I
Floor toTop
WaterConn.
64
H
Floor toTop ofWaterHeater
131/4
J
Floor toC/L
Combust.Chamber
Sight Hole
321/2
K
Depth
101/2
E
Floor toTop ofBurner
Approx.Shipping
Weight (lbs)
*Based on manufacturers rated recovery efficiency.†Shipping weights do not include burner and controls.
❂ Based on ANSI Z21.10.1 and 10.3 and DOE Test Methods.✦ Based on ANSI/ASHRAE 124 Standard.Actual values may vary based on circulator flow rate, number of zones, water andspace heating demands. Numbers subject to change.
C-DW1-70L6OF
InputWater Heating❂
First Hour Rating
Space Heating
CAAFUE%
Max. HeatingCapacity✦
119,000 BTU/Hr.
55,000BTU/Hr.
16.1 kW
174Gal.
78
34.5 kW
Heat Exchanger Head Loss
GPMFeet of Head Loss
20.34
52.15
85.51
108.61
1212.40
Part Numbers Description**228-44392-05 BECKETT burner with dual aqua stat @ 0.85 GPH
** Burner is 1-stage, 120V.
Speciality Products – Electric Energy Saver 204/205Dairy Barn Deluxe Water HeaterSpeciality Products – Electric Energy Saver 204/205Dairy Barn Deluxe Water Heater
■ Vitraglas® lining■ Hydrojet® Total Performance System■ Water connections – 3/4" NPT factory
installed true dielectric fittings ■ 2" Non-CFC foam insulation■ Fully automatic controls
(180°F maximum)■ Direct heat transfer with immersed
elements■ Protective magnesium anode rod■ 4" leg kit■ T&P relief valve installed■ Low restriction brass drain valve
AD
C
8"
B
Photo is ofDB-80R3DS
80DB-80R3DS 19 24 645/8 183
Dairy Barn Deluxe ModelDIMENSIONS IN INCHES
ELECTRIC B
JacketDiameter
GPHRecovery
100°F Rise
63
A
Floor to Heater Top
GallonCapacity
ModelNumber
C
Floor toWater Conn.
63
D
Floor toT&P Conn.
Approx.Shipping
Weight (lbs)
The Dairy Barn heater will be wired inter-locking (non-simultaneous) 240 volt with 4500 watt elements, unless otherwise specified. Other wattages are available up to 6,000 watts non-simultaneous and 11,000 watts simultaneous 240 volt. Suffix letter “S” indicates screw type element. NOTE: Not recommended for 180° sanitizing. NOTE: Refer to pages 134/135 for technical information and pages 148/149 for GPH recovery information.
Specialty Products 206/207Electric
FLOWCONTROLLED
TWIN HEATINGMODULE
THERMOSTATICTHREE PHASE
THERMOSTATIC
SINGLEPOINT
InstantaneousWater Heaters
■ On Demand Hot Water – no delay■ Cut Energy Waste – flow switch activates heater only on demand
(No stand-by heat loss)■ Continuous Hot Water – no storage capacity to run out ■ No T&P relief valve needed – check local codes■ Integral Flow Restrictor – built-in to ensure proper temperature rise■ 10 Year Warranty on heater body/element assembly
■ Easy Installation – mounts on wall – no sweat connections■ Ni Chrome Heating Element – a unique, patented flow path ensures
optimum heat transfer and extended element life■ Reduces Calcification■ Space Saving Installation – compact size■ Field Serviceable Element – 1 year warranty
3.03.53.54.14.15.5
ES-3000-1-S-10ES-3500-1-S-10ES-3500-4-S-10ES-4100-2-S-10ES-4100-5-S-10ES-5500-4-S-10
120120240208277240
41°48°48°56°56°75°
10 AWG10 AWG14 AWG12 AWG14 AWG10 AWG
Single Point Single Phase ModelsDIMENSIONS IN INCHES
ELECTRIC
Temp.Rise °F0.5 GPMVoltage
25.029.014.619.714.822.9
AMPSkW
RatingModel
Number*Recommended
Wire Size
7.59.5
EFT-7500-4-S-10EFT-9500-4-S-10
240240
34°43°
8 AWG8 AWG
Thermostatic Single Phase ModelsDIMENSIONS IN INCHES
ELECTRIC
Temp.Rise °F
1.5 GPM
25°32°
Temp.Rise °F
2.0 GPM
51°65°
Temp.Rise °F
1.0 GPM
68°86°
Temp.Rise °F
0.75 GPM
——
Temp.Rise °F
0.5 GPMVoltage
32.040.0
AMPSkW
RatingModel
Number*Recommended
Wire Size
SpecificationsDimensions: 10.75" x 5.25" x 2.875"Weight: 3 lbs.Materials:
Cover: ABS UL rated 94Vo.Glass reinforced “NORYL†” Heater
Body and Ni Chrome ElementColor: White • Element: Replaceable cartridge insert• Pipe-Fittings: 3/8" compression at top of unit
SpecificationsDimensions: 10.75" x 5.25" x 2.875"Weight: 3 lbs.Materials:
Cover: ABS UL rated 94Vo.Glass reinforced “NORYL†” HeaterBody and Ni Chrome Element
Color: White • Standard temperature range 100°F-140°F.• Element: Replaceable cartridge insert. • Pipe-Fittings:1/2" compression at bottom of unit.U.L. Listed: E86887(M)
*Additional voltages and wattages are available. For more information, please consult factory.†Noryl™ is a registered trademark of General Electric Company.
Electric Instantaneous 208/209Water Heaters (continued)
5.56.57.58.39.5
EFC-5500-4-S-10EFC-6500-4-S-10EFC-7500-4-S-10EFC-8300-2-S-10EFC-9500-4-S-10
240240240208240
25°30°34°38°43°
10 AWG10 AWG8 AWG8 AWG8 AWG
Flow Controlled Single Phase ModelsDIMENSIONS IN INCHES
ELECTRIC
Temp.Rise °F
1.5 GPM
18°22°25°29°32°
Temp.Rise °F
2.0 GPM
38°44°51°57°65°
Temp.Rise °F
1.0 GPM
50°59°68°76°86°
Temp.Rise °F
0.75 GPM
75°88°———
Temp.Rise °F
0.5 GPMVoltage
23.027.032.039.040.0
CurrentPer
PhasekW
RatingModel
Number*Recommended
Wire Size
19.0EFT-19000-4-D-10 240 43° 10 AWG
Series Two Single Phase Thermostatic ModelsDIMENSIONS IN INCHES
ELECTRIC
Temp.Rise °F
3.0 GPM
52°
Temp.Rise °F
2.5 GPM
65°
Temp.Rise °F
2.0 GPM
87°
Temp.Rise °F
1.5 GPMVoltage
2x40 Amps
CurrentPer
PhasekW
RatingModel
Number*Recommended
Wire Size
SpecificationsDimensions: 10.75" x 5.25" x 2.875"Weight: 3 lbs.Materials:
Cover: ABS UL rated 94Vo.Glass reinforced “NORYL†” HeaterBody and Ni Chrome Element
Color: White • Standard temperature range 100°F-140°F.• Element: Replaceable cartridge insert. • Pipe-Fittings:1/2" compression at bottom of unit.
Dimensions: 10" x 9" x 3"Weight: 8 lbs.Materials:
Cover: Enameled Steel.Glass reinforced “NORYL†” HeaterBody and Ni Chrome Element
Color: White • Element: Dual replaceable cartridgeinserts • Pipe-Fittings: 3/4" compression at bottom ofunit.U.S. Patent No.’s: 4,762,980 and 4,960,976*Additional voltages and wattages are available. For more information, please consult factory.
†Noryl™ is a registered trademark of General Electric Company.
18.024.032.0
EFT-18000-6-T-10EFT-24000-6-T-10EFT-32000-6-T-10
480 Y**480 Y**480 Y**
41°54°73°
6 AWG6 AWG8 AWG
Series Three-Three Phase Thermostatic ModelsDIMENSIONS IN INCHES
ELECTRIC
Meet or exceed ASHRecovery Efficiency ranging up to 78% (M-I-75 and
Temp.Rise °F
3.0 GPM
35°47°62°
Temp.Rise °F
3.5 GPM
32°41°55°
Temp.Rise °F
4.0 GPM
25°34°45°
Temp.Rise °F
5.0 GPM
49°65°87°
Temp.Rise °F
2.5 GPM
61°82°—
Temp.Rise °F
2.0 GPM
82°——
Temp.Rise °F
1.5 GPMVoltage
21.7 Amps28.9 Amps38.5 Amps
CurrentPer
PhasekW
RatingModel
Number*Recommended
Wire Size
28.038.0
EFT-28000-4-T-10EFT-38000-4-F-10
240240
65°86°
8 AWG Per Module8 AWG Per Module
Series Three-Single Phase Thermostatic ModelsDIMENSIONS IN INCHES
ELECTRIC
Temp.Rise °F
3.0 GPM
47°65°
Temp.Rise °F
4.0 GPM
76°104°
Temp.Rise °F
2.5 GPM
96°130°
Temp.Rise °F
2.0 GPM
——
Temp.Rise °F
1.5 GPMVoltage
3x40 Amps4x40 Amps
CurrentPer
PhasekW
RatingModel
Number*Recommended
Wire Size
SpecificationsDimensions: 12" x 12" x 3.5"Weight: 12 lbs.Dimensions: 151⁄4" x 121⁄4" x 41⁄4"Weight: 15 lbs.Materials:
Cover: Enameled Steel.Glass reinforced Heater Body and Ni Chrome Element
Color: White • Element: Triple replaceable cartridgeinserts • Pipe-Fittings: 3/4" compression at bottom ofunit.U.S. Patent No.’s: 4,762,980 and 4,960,976
VoltageCode Voltage
Voltage Identification CodeFor All Models
123456
120208220240277480
This unit must have 3 independent electrical circuits using correctly valued wire and 3 circuit breakers.
Example: EFT-28000-4-T-10The 4 in the model numberindicates 240 volt.
*Additional voltages and wattages are available. For more information, please consult factory.†Noryl™ is a registered trademark of General Electric Company.**Neutral leg required.
Warranty Information 210/211
Residential Gas ModelsResidential eF Series® Ultra High Efficiency Models...................................Residential Programmable Efficiency Models ............................................Residential Damper High EF Models .........................................................Residential High EF Models......................................................................Residential High Performance Models ......................................................Residential TTW® High Performance Models .............................................Residential Extra Recovery Models ...........................................................Residential Upright Models ......................................................................Residential Power Vent Models ................................................................Residential Power Direct Vent Models.......................................................Residential Direct Vent Models .................................................................Residential Ultra Low NOx Models ............................................................Residential Manufactured Home Models...................................................Residential Everhot® Tankless Models ......................................................Residential Electric ModelsResidential High Efficiency, Upright, Lowboy Models .................................Residential Utility, Wall Hung Models ........................................................Residential Kwickshot® Models ................................................................Solar ModelsResidential Solar Models..........................................................................Residential Oil ModelsResidential Oil-Powered Models...............................................................Residential Hydronic/Space HeatingResidential Combi1™ Models ...................................................................Residential Combi2™ Models ...................................................................Residential Indirect ModelsResidential PowerStor Series® Models......................................................Residential PowerStor2 Series® Models....................................................Residential PowerStor Series® SS Models.................................................Residential Storage TankResidential AST Models ...........................................................................
6 Year6 or 10 Year6 or 10 Year6 or 10 Year6 Year6 Year6 or 10 Year6 or 10 Year6 or 10 Year6 or 10 Year6 or 10 Year6 or 10 Year6 or 10 Year12 Year*
6 or 10 Year6 or 10 Year10 Year†
6 or 10 Year
6 Year
10 Year10 Year
Limited LifetimeLimited LifetimeLimited Lifetime
6 Year
6 Year6 or 10 Year**6 or 10 Year**6 or 10 Year**6 Year6 Year6 or 10 Year**6 or 10 Year**6 or 10 Year**6 or 10 Year**6 or 10 Year**6 or 10 Year**6 Year5 Year
6 or 10 Year**6 or 10 Year**1 Year
6 Year
2 Year
6 Year6 Year
6 Year6 Year6 Year
6 Year
1 year1 year1 year1 year1 year1 year1 year1 year1 year1 year1 year1 year1 year
1 year1 year1 year1 year1 year1 year1 year1 year
1 year
1 year
1 year1 year1 year1 year1 year
Commercial Gas ModelsLight Duty Commercial High Performance Models.....................................Light Duty Commercial TTW® High Performance Models ...........................Light Duty Commercial Upright Models.....................................................Light Duty Commercial Power Vent Models...............................................Light Duty Commercial Power Direct Vent Models .....................................Light Duty Commercial Direct Vent Models ...............................................Light Duty Commercial Ultra Low NOx Models ..........................................Commercial Flue Damper Models ............................................................Commercial Induced Draft Models ...........................................................Commercial Millivolt Models ....................................................................Commercial eF Series® Ultra High Efficiency Models .................................Commercial Power Direct Vent Models .....................................................Commercial Copper Brute Models ............................................................Commercial Electric ModelsLight Duty Commercial Upright, Lowboy Models .......................................Light Duty Commercial Utility, Wall Hung Models.......................................Commercial Medium Duty Models............................................................Commercial Surface Mount, Immersion Models ........................................Commercial ASME Models .......................................................................Commercial Dairy Barn Models ................................................................Commercial Brute Models........................................................................Commercial Booster Models ....................................................................Commercial Oil ModelsCommercial Oil-Powered Models .............................................................Commercial Indirect-FiredCommercial PowerStor® Models ..............................................................Commercial Storage TankCommercial Jacketed Models ..................................................................Commercial Bare Glass Coated Models ....................................................Commercial Jacketed Large Volume Models.............................................Commercial Un-Jacketed Large Volume Models .......................................Commercial Top Coat Large Volume Models .............................................
Limited TankWarranty
Limited PartsWarranty
3 Year3 Year3 Year3 Year3 Year3 Year3 Year3 Year3 Year3 Year3 Year3 Year5 Year*
3 Year3 Year3 Year3 Year3 Year3 Year3 Year5 Year
3 Year
5 Year
5 Year5 Year5 Year5 Year5 Year
Limited TankWarranty
Limited PartsWarranty
Some states do not allow limitations on warranties. See copy of the Warranty included with the heater.
*Heat Exchanger Only. **10 year parts warranty on warranty upgrade kit models only. †Heater Body Element Assembly
S = 1998 T = 1999 W = 2000 X = 2001 Y = 2002
Z = 2003 A = 2004 B = 2005C = 2006 D = 2007
E = 2008 F = 2009G = 2010 H = 2011 I = 2012
K = 1993 L = 1994 M = 1995N = 1996 P = 1997
Tank Type Serial Number IdentificationFIRST LETTER - YEAR OF MANUFACTURE
A = JANUARYB = FEBRUARYC = MARCHD = APRIL
Example:FC1234567 = MARCH, 2009 ProductionNA1234567 = JANUARY, 1996 Production
E = MAYF = JUNEG = JULYH = AUGUST
J = SEPTEMBERK = OCTOBERL = NOVEMBERM = DECEMBER
SECOND LETTER - MONTH OF MANUFACTURE
❏ Yes, I want to receive a free supply of30 REASONS, Bradford White’s brochure, absolutely free!
Name Qty.
Company Name
Address
City State Zip
✔
Mail to: 30 REASONS • 880 Louis Drive • Warminster, PA 18974You can also order by visiting our website: www.bradfordwhite.com
30 REASONSTo Buy A WaterHeater From YourProfessionalPlumbing andHeatingContractor
This brochurefor consumersis packed withinformationthat concernstheir comfort,safety andpeace of mind.
Notes
FPC-0111© 2011, Bradford White Corporation. All Rights Reserved.
Visit us on the web at: www.bradfordwhite.comSales/800-523-2931 • Fax/215-641-1670
Technical Support/800-334-3393 • Fax/269-795-1089Warranty/800-531-2111 • Fax/269-795-1089
For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.
Ambler, PA
Bradford White Subsidiary Companies
Built to be the Best™