genvx features & benefits. bullard’s blast legacy builds protecting workers since 1898...
TRANSCRIPT
GenVX Features & Benefits
Bullard’s Blast Legacy Builds
• Protecting workers since 1898• Inventor of the Hard Hat in 1919• Golden Gate Bridge Project Blast Helmet in 1930’s• 36 Series, 46 Series, 77 Series, 88 Series, 88VX• GenVX, the next generation of blasting, 2012
The GenVX is:
• The Lightest• The Coolest• The Most Comfortable• The Most Dependable
The Next Generation of Blasting
The Lightest• The GenVX is more than full pound
lighter than the leading competitive helmets on the market.
• No plenum or inner shell• High-Density Polyethylene (HDPE)
construction offers superior strength-to-weight ratio
Manufacturer ModelWeight in Pounds
Bullard GenVX 2.25
RPB Nova 2000 3.50
Clemco Apollo 600 4.00
Bullard GenVX
Nova 2000
The Coolest
• Passes air directly over the head– No obstructions from foam or plenum– User experiences all-over cooling effect
• Cool tube chills air 45 degrees– Reduces heat stress– Improves productivity
• Delivers the most air among competitive helmets– Increased volume equals increased cooling effect– Typically 50-60% higher than NIOSH minimum requirements
The Most Cooling Choices• “New ” CT Cool Tube
– Chills air 45 degrees– 96% lighter than AC1000 (wt. < ¼ lb.)– Exhaust filter protects against paint overspray
• AC1000 Cool Tube– Chills air 35 degrees– Time Tested/Proven– Metal Construction
• Dual Cool System– Twin tubes
• One cools Helmet• One cools Vest
– Only NIOSH approved dual system
The Most Comfortable
• Six-point suspension– Wide 1” straps– Ratchet adjustment
• Center breathing tube connection for balance
• Cheek pads increase stability– Helmet turns with user’s head– Machine Washable– Adjustable; User determines
thickness
Cheek pads
Air FlowSuspension
Breathing Tube
The Most Dependable
• Independent, third party 1,000 Assigned Protection Factor (APF)*
• ANSI/ISEA Z89 Head Protection • ANSI/ISEA High-Impact Z87 + Face
Protection• “Grit Guard” visor keeps debris out of
lenses • Latch Guard keeps cape secure• Strain Guard protects breathing tube
connection• Injection-molded door provides precise
tight seal *pending
The Most Versatile• “3rd Hand” Cape Attach Assist
– Speeds up donning– Start blasting faster
• Hot/Cold Tubes Available– Warm up in winter– Cool down in summer
• Largest Variety of Available Capes– 28”, 38”– Cap Sleeve, Long Sleeve
• Largest Variety of Connectors Available– Hansen, Snap Tite, Schrader, CEJN– Steel, Brass, Stainless
“3rd Hand”
Hot/Cold Tube
The Most Visible• 66% larger viewing lens than NOVA
– Reduces blind spots & “closed in” feeling• Tinted Lenses Available
– Smoke or Green– Reduces glare
• Adhesive Mylar Lens Covers Available• Over the top airflow prevents fogging
NOVA Lens
Bullard Lens
GenVXThe Next Generation of Blasting
• Headquartered in Cynthiana, Kentucky• Founded in 1898• Fifth generation family-owned enterprise• Product lines include thermal imagers, hard hats,
firefighter and rescue helmets, supplied air respirators, powered air-purifying respirators, and air quality equipment.
Resources
• www.bullard.com • .
• Brochure• History Sheet• Competitive Comparisons• You Tube Videos• PowerPoint Presentations
Sales Support - USA• Jim Beckstead (415-755-8264)
– California, Arizona, Nevada, Hawaii
• Stephen Bolling (303-818-9207)– Alaska, Colorado, Idaho, Montana, Oregon, – Utah, Washington, Wyoming
• Tom Ludwig (832-654-1860)– Arkansas, Louisiana, New Mexico, Texas
• Marty Lang (816-547-0017)– Iowa, Southern Illinois, Kansas, Missouri, – Nebraska, North Dakota, South Dakota
• Paul Ostrowski (773-203-6295)– Northern Illinois, Minnesota, Michigan Wisconsin
Sales Support - USA• Pat Riley (513-578-4550)
– Indiana, Ohio, Kentucky, Tennessee
• Brian Floyd (770-508-6460)– Alabama, Florida, Georgia, Mississippi – North Carolina, South Carolina
• Kevin Quinn (610-999-1196)– Delaware, Maryland, New Jersey– Pennsylvania, Virginia, West Virginia
• David Grislis (816-547-0017)– Connecticut, Maine, Massachusetts – New Hampshire, New York, Rhode Island, Vermont
Sales Support – Canada & Latin America
• Keith Courtepatte (647-881-7298)– Canada
• Milton Ortega (954-224-1842)– Mexico, Puerto Rico, Dominican Republic, Jamaica, Haiti ,Trinidad, Tobago, U.S.
Virgin Islands, Bahamas, All West Indies Islands, Netherlands Antilles, Belize, Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua, Panama, Bolivia, Colombia, Ecuador, Peru, Venezuela
• Cristian Cifuentes (859-234-6616 ext 878)– Chile, Brazil, Paraguay, Uruguay, Argentina
Sales Support – International
Asia Pacific, Middle East & AfricaBullard Asia Pacific Pte LtdLHK Building701, Sims Drive#04-03Singapore 387383
Tel: +65 6745 0556Fax: +65 6745 5176E-mail: [email protected]: www.bullard.com
Daniel HengRegional Sales Manager
Sales Support – International
EUROPEBullard GmbHLilienthalstrasse 12D - 53424 Remagen
Telefon: +49-(0)2642-99998-0Fax: +49-(0)2642-99998-29
E-mail: [email protected]: www.bullardextrem.com
Guillaume KohenRegional Sales Manager
Management Support
• National Accounts Manager
Randy Davis
404-966-8751• National Sales Manager
Brad Harvey
859-234-6616 ext 167
Product Support
• Customer Service Manager
Heidi Coffee (1-877-BULLARD)
[email protected] • Product Manager
Holly Jo Hellyer (859-234-6616 ext 243)
[email protected] • Product Line Manager
Grant Rowe (859-234-6616 ext 153)
