geotechnical drilling rig specifications - works.go.ug · €€€€€mud pump pressure, minimum...

GEOTECHNICAL DRILLING RIG SPECIFICATIONS

Date 24.07.2018

Weight of equipment , 6,500kg

Accessories for Drilling Rig

Note:

2) All items quoted under this specifications must be supplied as specified.

3) Items mentioned under consummables in 3.3 must be quotated and supplied seperately.

Flexibility of Drilling Rig: Fast and easy changes between wireline coring, flush rotary drilling

and auger drilling, providing excellent flexibility from one drilling platform to another.

Core, rotary and auger drilling packages.

Core drilling depth, minimum 175m

Rotary drilling depth, minimum 175m

Auger drilling depth, minimum 150m

Pull back capacity, minimum 55kN

Mud pump pressure, minimum 60 bars

Diesel Engine

Specification of Drilling Rig

Maximum hole size, minimum 175mm

Recommended rod size, minimum 76.1mm

Drill rod diameter, 89mm (minimum depth of 175m) - for flush rotary drilling package

Hollow stem augers diameter, 114mm, 127mm, 140mm and 168mm respectively

(minimum depth of 150m) for auger drilling package

NQ, HQ, PQ, and SQ core bits

Description: 1 No. Surface GEOTECHNICAL drilling rig, mounted on a BRAND NEW two axles

WHEELED DIESEL ENGINE trailer/truck complete with accessories as specified and operator's

mannual written in ENGLISH.

Centralizer (rod guide)

1) All drill rods of diameters 76.1mm and 89mm and augers of sizes 114mm, 127mm, 140mm and

168 must be supplied up to minimum total lengths of 175m, 175m and 150m respectively.

Safety cage

1000 mm mast dump for improved positioning on rough terrain

Rod clamps

63.5kg Standard Penetration Test (SPT) auto hammer

Sampling tubes

Flush rotary bits/wireline core bits/augers

Drill rod diameter, 76.1mm (minimum depth of 175m) - for wireline core drilling package

Drill rod storage, for 30 pieces

Mud pump pressure, minimum 60 bars

GEOTECHNICAL DRILLING RIG SPECIFICATIONS

Date : 23/07/2018

1.0

Hole Depth Meters Hole Depth U.S

Core drilling

NQ / NQ2” / NV / NV2” 350 m 1,150 ft

HQ / HV 220 m 710 ft

PQ / PV 575 ft

SQ 90 m 290 ft

Minimum Hole diameter 175 mm (6.9 in) 575 ft

Minimum Hole diameter 168 mm (6.7 in) 493 ft

Minimum depth capacity 175 m 575 ft

Recommended minimum hole size 115 mm 4.5 in

Maximum hole size 168 mm 5 in

Recommended minimum rod size 76.1 mm 3 in

1.1 PRIME MOVERMetric U.S.

Standard

Fuel

Fuel Consumption

Minimum Power 53 kW @ 2.300 rpm 71 hp @ 2,300 rpm

Electrical Circut

Fuel Tank Capacity 60 llitres 16 gal

1.2

Metric U.S.

Engine

Fuel

Fuel Consumption 223 g/kWh

Minimum Power 72,4 kW @ 2.300 rpm 94 hp @ 2,300 rpm

Electrical Circut 12VFuel Tank Capacity 60 litres 16 gal

225 g/kWh

DEUTZ D914 L04 air cooled engine, COM III, 4 cylinder

Diesel

DRILLING DEPTH GUIDELINES

Flush rotary drilling Package

Auger drilling Package

Wireline core drilling package

175 m minimum (Recommended)

175 m (Recommended)

150 m (Recommended)

12V

DEUTZ BF4L914 air cooled engine, COM II, 4 cylinder turbocharged

PRIME MOVER FOR HIGHER AMBIENT TEMPERATURE

Diesel

1.3 ROTARY HEAD Metric U.S.

Low Gear

3,560 - 723 lb-ft /

52 - 265 rpm

High Gear

1,368 - 265 lb-ft /

140 - 708 rpm

Bore - Inside Diameter 62 mm 2.44 in

Flushing Head - Inside Diameter 22 mm 0.87 in

Rotation Motors

Top Drive Flange

Hydraulic Motor at Max / Min Displacement, Diesel

Engine at 2200 rpm

Gear Ratio 1st - 7.68 : 1 2nd - 2.92 : 1Rotary Head Carriage with Side Shift

1.4 ROTARY HEAD Metric U.S.

Low Gear 6,540 Nm / 39 rpm

4,824 lb-ft / 39

rpm

High Gear 320 Nm / 800 rpm 236 lb-ft / 800 rpm

Bore - Inside Diameter 52 mm 2 in

Flushing Head - Inside Diameter 24 mm 1 in

Rotation Motors

Parker V12-80 + Danfoss TMT

315

Top Drive Flange 2 3/8” API Reg PIN

Gear Ratio 4.047:1

Distance From Drilling Line to Chain 435 mm 17.12 in

Rotary Head Carriage with Side Shift

1.5 HYDRAULIC SYSTEM

Metric U.S.

Primary Pump

Parker bent axis, fixed

displacement

Minimum Flow 66 lpm @ 2,200 rpm

17.5 gpm @ 2,200

rpm

Minimum Pressure 250 bar 3,626 psi

Secondary Pump Cassappa gear pump

Minimum Flow 59 lpm @ 2,200 rpm

15.5 gpm @ 2,200

rpm

Minimum Flow (2nd) 48 lpm @ 2,200 rpm

12.5 gpm @ 2,200

rpm

Minimum Pressure 175 bar 2,538 psi hp

Oil Tank Capacity 200 litres 53 gal

Danfoss - variable / reversible with pressure remote

2 3/8” API Reg PIN

4,880 - 980 Nm / 52-265 rpm

1,855 - 360 Nm / 140 - 708 rpm

1.6

Metric U.S.

Feed Stroke 4000 mm 13.2 ft

Feed Speed Normal / fast

Up 12.5/31 m/min 41/101 ft/ min

Down 18/51 m/min 59/167 ft/min

Pull down force 34 kN 7,673 lbf

Pull Back Force 55 kN 12,364 lbf

Drilling Inclination

Mast Dump 1000 mm 3.3 ft

Minimum Rod Length 3000 mm 10 ft

1.7 MAIN WINCHMetric U.S.

Line Pull 30 kN 6,744 lbf

Line Speed - Bare Drum 29 m/min 95 ft/min

Line Speed - Full Drum 36 m/min 118 ft/min

Cable Length, 14 mm 35 m 114.8 ft

1.8 ROD CLAMPSMetric U.S.

Minimum Diameter 220 mm 8.6 in

Minimum Clamping Capacity 175 kN 4,500 lbf

Minimum Breaking Torque 20,5 kNm 15,120 lb ft

CENTRALIZER - ROD GUIDE

Exchangeable Inserts for Rods

1.9 UNDERCARRIAGEU.S.

Type

Max. Driving Speed 1.5 km/hr 1 mph

Axis Distance 1715 mm 67.5 in

Minimum Ground Pressure 0,053 MPa 7.7 psi

Climbing Capacity 60% (approx. 30°)

Two axle wheel Trailer Mounted

Metric

45° off horizontal to 90° vertical down

56, 76, 89, 114, 127, 140, 168, 193, 220 mm (Choose required

sizes)

DRILL MAST AND FEED SYSTEM WITH FEED CYLINDER

2.0

Metric U.S.

Minimum Rod Pull 2 x 3 m (6 m) 20 ft

Fitted onto Standard Mast to Pull 6 m Rod

Rod Storage 30 pieces of 76 mm (3 in) rods

Towing Hook on Rear of Rig

2.1

Metric U.S.

Undercarriage

Width 1900 mm 74.8 in

Pad Width 300 mm 11.8 in

Weight 1035 kg 2280 lb

STANDARD PENETRATION TEST (SPT)

Hammer Weight 63.4 kg 140 lb

Drop Stroke 760 mm 30 in

Total Weight 180 kg 397 lb

With Rotary Head

Height 2784 mm 109.5 in

Width 1950 mm 76.6 in

Mast Length 6700 mm 263.5 in

Complete Height 7970 mm 313.5 in

2.2 OTHER ACCESSORIES

Steel Casing pipes, 10 pieces 3m long, 168mm dia.



2.3 Rock Coring System

Core barrel type A, 1 Piece 76mm

Core barrel type A, 1 Piece 89mm

Core barrel type C, 1 Piece 114mm

Core rods type A, 3m long, 20 Pieces 76mm

Core rods type B, 3m long, 20 Pieces 89mm (HQ)

Core rods type C, 3m long, 20 Pieces 114mm (PQ)

Core bits, type A, 25 Pieces 76mm

Core bits, type B, 25 Pieces 89mm

Core bits, type C, 25 Pieces 114mm

WEIGHT AND MEASUREMENTS

MAST EXTENSION FOR LONGER ROD PULL

GEOTECHNICAL DRILLING RIG SPECIFICATIONS (CONT'D)

2.4 WIRELINE WINCHMetric U.S.

Line Pull - Bare Drum 6,5 kN 1461 lbf

Line Pull - Full Drum 4,0 kN 90 lbf

Line Speed - Bare Drum 100 m/min 327 ft/min

Line Speed - Full Drum 200 m/min 656 ft/min

Cable Length 5 mm 350 m 1150 ft

MUD PUMP DP100

Metric U.S.

Continuous Flow 90 l/min 23.7 gpm

Pressure 30 bar 435 psi

2.5 MUD PUMP Metric U.S.

Continuous Flow 130 l/min 34 gpm


FMC PUMP L0918

Metric U.S.

Flow 100 l/min 26 gpm


2.6

Metric U.S.

Impact Rate 1-30 bpm

Travel Length 762 mm 30 in

Hammer Weight Brazil 63,5 kg 140 lb

OIL LINE LUBRICATOR FOR DTH DRILLING

Metric U.S.

Tank Capacity 10 l 2.7 gal

2.7 HIGH TEMPERATURE OIL COOLER

2.8 NIGHT LIGHTSNo. of Pieces 4

2.9

Jaw Plates For Coring BQ™ / BW

(Choose Required Sizes)

HQ™/HW

PW

3.0 MIST PUMPMetric U.S.

Flow 30 l/min 8 gpmPressure 200 bar 2,900 psi

STANDARD PENETRATION TEST (SPT) AUTO HAMMER

JAW BODY FOR CLAMP AND BREAK OUT FOR CORING

NQ™/NW (recommended)

Upgraded Oil Cooler For Ambient Temperatures Over 35°C (95°F)

3.1 ACCESSORIES

Auxiliary Work Vice

Remote Control

Auxiliary Diesel Filling Pump

Instrument Vandal Covers

Rubber Crawler Pads

Tool Box

Environmental Oil In Hydraulic System

3.2 CENTRALIZER - ROD GUIDE

Exchangeable Inserts for Rods

With necessary set of tools for basic maintenance

and lubrication

76, 89, 114, 127, 140, 168, 193, 220 mm (All are

required sizes)

Full set (76 pcs)

180 mm wide, 220 mm long, 120 mm deep clamp,

rotating mounting base and separate rod support

work bracket

Radio remote control for driving

Electric powered diesel filling pump

Lockable covers for control panels and

instruments

3.3

Diamond Impregnated Auger Drill Bits:

114mm dia. - 20 pieces




Tungsten Carbide Core Bits: Diamond Impregnated PDC Core Bits:

76mm dia. - 10 pieces 76mm dia. - 10 pieces






Diamond Impregnated PDC Core Bits:







Tungsten Carbide Core Bits:







Tugnsten Carbide Drill Bits:







SUPPLIES OF CONSUMMABLES (ADDITIONAL REQUIREMENTS)

Tungsten Carbide Auger Drill bits:





Hollow Stem Auger Section 1.5m long:





Diamond Impregnated PDC Core Bits:







Tungsten Carbide Drill Bits:







Diamond Impregnated Drill Bits:







Hollow Stem Lead Auger Section:




168mm dia. -5 pieces

Soil Sampling Tool:

Split Spoon Soil sampler - 5 Pieces

Geotechnical API Steel Casing Pipes 3m long:




Geotechnical Drill Rods 3m long:







Auger Drive Components:


HSA Drive Cap 2 3/8” API Reg PIN - 5 Pieces

Auger Connector Rod Pin 2 3/8” - 100 Pieces


Auger Connectors (threaded type) - 5pieces

Lifting Components:

Lifting bails ( externally threaded type) - 5 pieces

Lifting Components:

Lifting bails ( internally threaded type) - 5 pieces

Top Drive Flange 2 3/8” API Reg PIN - 5 Pieces

Drill rig spindle - 1 Piece

Geotechnical drill rod adaptors (female socket):

76.1mm - 50 pieces

89mm - 50 pieces

Geotechnical drill rod adaptors (male socket):

76.1mm - 50 pieces

89mm - 50 pieces

Geotechnical drill rod adaptors (nipple):

76.1mm - 50 pieces

89mm - 50 pieces

Geotechnical drill rod spanners:

76.1mm - 5 pieces

89mm - 5 pieces

114mm - 5 pieces

127mm - 5 pieces

140mm - 5 pieces

168mm - 5 pieces

Geotechnical drill rod spanners:

76.1mm - 5 pieces

89mm - 5 pieces

114mm - 5 pieces

127mm - 5 pieces

140mm - 5 pieces

168mm - 5 pieces

Geotechnical drill rod chain spanners:

76.1mm - 10 pieces

89mm - 10 pieces

114mm - 10 pieces

127mm - 10 pieces

140mm - 10 pieces

168mm - 10 pieces

geotechnical drilling rig specifications - works.go.ug · €€€€€mud pump pressure, minimum...

Documents