gilson engineering catalog · jordan valve, a division of richards industries 3170 wasson road •...

6
Jordan Valve, a Division of Richards Industries 3170 Wasson Road • Cincinnati, Ohio 45209 Telephone 513-533-5600 • Fax 513-871-0105 Toll-FreeTelphone: 800-543-7311 (U. S. A. & Canada) E-Mail: [email protected] • URL: www.jordanvalve.com Mark 608 Gas Pressure Regulators The MK608 Gas Pressure Regulator is the ideal valve for low pressure gas regulation. The self-contained low pressure gas regulator is for use on tank blanketing, gas meter inlet pressure regulating, gas burners and other low pressure air and gas applications. The MK608 is normally open. Increases in the outlet pressure are sensed through the aspirator causing the large elastomer diaphragm to rise, which moves the plug toward the seat. As outlet pressure decreases, the dia- phragm moves down and moves the plug away from the seat to increase flow. The lever, which connects the stem to the diaphragm, amplifies diaphragm forces for tighter shutoff (only available on sizes 3/4” through 1-1/4”). The large diaphragm and lever actuation allows the MK608 to act with higher sensitivity and more amplified forces over that of the typical diaphragm/stem connec- tion. High sensitivity is important, as the MK608 often works with very low pressure (down to 1” w.c. or 2,5 mbar). This special actuation improves the accuracy and shutoff of the valve - two important benefits in this style of regulator. FEATURES Inlet pressures up to 150 psi (10 bar) Rugged, heavy-duty design — emergency outlet pres- sure may reach 100% of inlet pressure without dam- aging valve 360° body orientation — valve can be installed in any position, and can be easily repositioned while in-line Easy maintenance — seat and plug can be inspected without removing body from the line Completely self-operated — no external power source required Tight shutoff — soft elastomer plug provides ANSI Class VI shutoff Pressure Regulators Mark 608 Gas Pressure Regulators SPECIFICATIONS (3/4”-1-1/4”) Line Sizes: 3/4” (DN20), 1” (DN25), 1-1/4” (DN32) End Connections Threaded — NPT, BSPT, BSPP Flanged — 150#, 300#, PN16, PN40 Materials Body & Housing: Ductile Iron, Carbon Steel (A216, WCB), Stainless Steel (A35/CF8M) Seat: Brass (DI body); Stainless Steel (CS/SS body) Plug: Brass and Buna-N (DI body); Stainless Steel and Viton (CS & SS body) Diaphragm: Buna-N/Nylon (DI body); Viton (CS & SS body) Aspirator Tube: Acetal Service: Air or gas Shutoff: ANSI Class VI Temperature Range: -20°F (-29°C) to 200°F (93°C) Maximum Inlet Pressure: 150 psi (10 bar) Reduced Pressure Control Range: 1.0 to 2.5 inches w.c. (2,5 to 6,2 mbar) 2.0 to 5.5 inches w.c. (5,0 to 13,7 mbar) 4.0 to 10.0 inches w.c. (10,0 to 24,9 mbar) 5.0 to 30.0 inches w.c. (12,4 to 74,7 mbar) 0.5 to 1.75 psig (0,03 to 0,12 bar) 1.0 to 3.5 psig (0,07 to 0,24 bar) Orifice Sizes (Interchangeable) 1/8” (3mm), 3/16 (5mm), 1/4” (6mm), 5/16” (8mm), 3/8” (10mm), 7/16” (11mm), 1/2” (13mm), 9/16” (14mm) 3/4” - 1-1/4”

Upload: others

Post on 28-May-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: GIlson Engineering Catalog · Jordan Valve, a Division of Richards Industries 3170 Wasson Road • Cincinnati, Ohio 45209 Telephone 513-533-5600 • Fax 513-871-0105 Toll-FreeTelphone:

Jordan Valve, a Division of Richards Industries3170 Wasson Road • Cincinnati, Ohio 45209Telephone 513-533-5600 • Fax 513-871-0105

Toll-FreeTelphone: 800-543-7311 (U. S. A. & Canada)E-Mail: [email protected] • URL: www.jordanvalve.com

Mark 608Gas Pressure Regulators

The MK608 Gas Pressure Regulator is the ideal valvefor low pressure gas regulation. The self-contained lowpressure gas regulator is for use on tank blanketing,gas meter inlet pressure regulating, gas burners andother low pressure air and gas applications.

The MK608 is normally open. Increases in the outletpressure are sensed through the aspirator causing thelarge elastomer diaphragm to rise, which moves the plugtoward the seat. As outlet pressure decreases, the dia-phragm moves down and moves the plug away fromthe seat to increase flow. The lever, which connectsthe stem to the diaphragm, amplifies diaphragm forcesfor tighter shutoff (only available on sizes 3/4” through1-1/4”).

The large diaphragm and lever actuation allows theMK608 to act with higher sensitivity and more amplifiedforces over that of the typical diaphragm/stem connec-tion. High sensitivity is important, as the MK608 oftenworks with very low pressure (down to 1” w.c. or 2,5mbar). This special actuation improves the accuracyand shutoff of the valve - two important benefits in thisstyle of regulator.

FEATURES

• Inlet pressures up to 150 psi (10 bar)

• Rugged, heavy-duty design — emergency outlet pres-sure may reach 100% of inlet pressure without dam-aging valve

• 360° body orientation — valve can be installed in anyposition, and can be easily repositioned while in-line

• Easy maintenance — seat and plug can be inspectedwithout removing body from the line

• Completely self-operated — no external power sourcerequired

• Tight shutoff — soft elastomer plug provides ANSIClass VI shutoff

Pressu

re Reg

ulato

rsM

ark 608 Gas P

ressure R

egu

lators

SPECIFICATIONS (3/4”-1-1/4”)

Line Sizes: 3/4” (DN20), 1” (DN25), 1-1/4” (DN32)

End Connections• Threaded — NPT, BSPT, BSPP• Flanged — 150#, 300#, PN16, PN40

Materials• Body & Housing: Ductile Iron, Carbon Steel (A216,

WCB), Stainless Steel (A35/CF8M)• Seat: Brass (DI body); Stainless Steel (CS/SS

body)• Plug: Brass and Buna-N (DI body); Stainless Steel

and Viton (CS & SS body)• Diaphragm: Buna-N/Nylon (DI body); Viton (CS &

SS body)• Aspirator Tube: Acetal

Service: Air or gas

Shutoff: ANSI Class VI

Temperature Range: -20°F (-29°C) to 200°F (93°C)

Maximum Inlet Pressure: 150 psi (10 bar)

Reduced Pressure Control Range:• 1.0 to 2.5 inches w.c. (2,5 to 6,2 mbar)• 2.0 to 5.5 inches w.c. (5,0 to 13,7 mbar)• 4.0 to 10.0 inches w.c. (10,0 to 24,9 mbar)• 5.0 to 30.0 inches w.c. (12,4 to 74,7 mbar)• 0.5 to 1.75 psig (0,03 to 0,12 bar)• 1.0 to 3.5 psig (0,07 to 0,24 bar)

Orifice Sizes (Interchangeable) 1/8” (3mm), 3/16(5mm), 1/4” (6mm), 5/16” (8mm), 3/8” (10mm), 7/16”(11mm), 1/2” (13mm), 9/16” (14mm)

3/4” - 1-1/4”

Page 2: GIlson Engineering Catalog · Jordan Valve, a Division of Richards Industries 3170 Wasson Road • Cincinnati, Ohio 45209 Telephone 513-533-5600 • Fax 513-871-0105 Toll-FreeTelphone:

MK608 GAS PRESSURE REGULATOR

DIMENSIONS (3/4” - 1-1/4”)

9.00

D

AC

B

1/4”

NP

T

ORDER SCHEMATIC (3/4” - 1-1/4”)

1—

2—

3/

4 5 6

806 570 ID TP 80 DS1O

1 ledoM

806 ledoM

2 eziS

sehcnI ND570 "4/3 02ND001 "1 52ND521 "4/1-1 23ND

3 lairetaMydoBID norIelitcuDSC leetSnobraC6S leetSsselniatS

4 snoitcennoCdnE2&1TP TPNTB TPSBPB PPSBWS WSF5F EF#0513F EF#0036F 61NP7F 04NPZZ dradnatS-noN

5 ecifirO4&3

sehcni mm10 "8/1 mm320 "61/3 mm530 "4/1 mm640 "61/5 mm850 "8/3 mm0160 "61/7 mm1170 "2/1 mm3180 "61/9 mm41ZZ dradnatS-noN

6 egnaR6&5

.C.W rabmDS10 .C.W"5.2-1 rabm2,6-5,2DS20 .C.W"5.5-2 rabm7,31-0,5DS30 .C.W"01-4 rabm9,42-0,01DS40 .C.W"03-5 rabm7,47-4,21DS50 isp57.1-5.0 rab21,0-30,0DS60 isp5.3-1 rab42,0-70,0

ZZ dradnatS-noN

How to order a MK608 Series Gas Pressure Regulator (3/4” - 1-1/4”).

sdnE )02ND("4/3 )52ND("1 )23ND("4/1-1

AEF051 "52.7 )mm481( "52.7 )mm481( "52.7 )mm481(

EF003 "05.7 )mm191( "05.7 )mm191( "05.7 )mm191(

BEF051 "13.11 )mm782( "13.11 )mm782( "13.11 )mm782(

EF003 "13.11 )mm782( "13.11 )mm782( "13.11 )mm782(

C ET/LLA "88.3 )mm99( "88.3 )mm99( "88.3 )mm99(

D LLA "57.5 )mm641( "57.5 )mm641( "57.5 )mm641(

Page 3: GIlson Engineering Catalog · Jordan Valve, a Division of Richards Industries 3170 Wasson Road • Cincinnati, Ohio 45209 Telephone 513-533-5600 • Fax 513-871-0105 Toll-FreeTelphone:

MK608 GAS PRESSURE REGULATOR

SPECIFICATIONS (1-1/2” - 2”)

Line Sizes: 1-1/2” (DN40), 2” (DN50)

End Connections• Threaded — NPT, BSPT, BSPP• Flanged — 150#, 300#• Others upon request

Materials• Body: Bronze (B61), Carbon (WCB), Stainless Steel (CF8M)• Trim: 316 Stainless Steel• Seat: 316 Stainless Steel• Diaphragm: Buna - N, Viton, and EPDM with Polyester

reinforcement

Shutoff: ANSI Class VI

Ranges:• 2 to 5 inches w.c. (4,98 to 12,5 mbar)• 4 to 8 inches w.c. (9,96 to 19,93 mbar)• 8 to 28 inches w.c. (19,93 to 69,75 mbar)• 10 to 17 inches w.c. (24,91 to 42,35 mbar)• 14 to 28 inches w.c. (34,87 to 69,75 mbar)• 0.75 to 1 psi (51,71 to 68,95 mbar)• 1 to 2 psi (68,95 to 137,90 mbar)• 1.5 to 3 psi (0,10 to 0,21 bar)• 3 to 5 psi (0,21 to 0,34 bar)

Cv Rating: 23 (20 Kv)

Pressure Temperature Rating: 25 psi @ 100°F (1,72 bar @27,8 °C), 25 psi @ 275°F (1,72 bar @ 135°C)

Maximum Pressure Drop: 25 psig (1,72 bar)

DIMENSIONS (1-1/2” -2” 150# IFE)

DIMENSIONS (1-1/2” -2” NPT)

A

C

B

D

3/4” FNPTSensingPort

D

C

B

A

Flow

Flow

The 1-1/2” & 2” size MK608 valves are for useon large tank blanketingapplications or other lowpressure gas regulation.In a tank blanketing ap-plication, the Mark 608is used to control theflow of the blanketinggas into the tank tomaintain the proper posi-tive pressure. Once theblanket has been estab-lished, a small flow ofnitrogen is continually admitted to the tank to keep the blan-ket fresh. These valves are often used in conjunction withJordan’s MK 508 Back Pressure Gas Regulator, used to ventgas from the tank to prevent blanketing pressure from risingto a level that could damage the tank.

The MK608 comes standard with an extra large diaphragm togive set point control as low as 2.0” w.c. (4,98 mbar). Inaddition, the “S” pattern body design allows for high flow ca-pacity and also gives the option of having bubble tight shutoff.

)04ND("2/1-1 )05ND("2

A "57.6 )mm171( "57.6 )mm171(

B "39.4 )mm521( "39.4 )mm521(

C "23.21 )mm99( "23.21 )mm99(

D "0.51 )mm183( "0.51 )mm183(

)04ND("2/1-1 )05ND("2

A "57.8 )mm222( 00.01 )mm452(

B "39.4 )mm521( "39.4 )mm521(

C "23.21 )mm99( "23.21 )mm99(

D "0.51 )mm183( "0.51 )mm183(

Page 4: GIlson Engineering Catalog · Jordan Valve, a Division of Richards Industries 3170 Wasson Road • Cincinnati, Ohio 45209 Telephone 513-533-5600 • Fax 513-871-0105 Toll-FreeTelphone:

1-1/2” MK608 FLOW CAPACITIES

Nitrogen at 0.97 s.g. in scfh and Nm3/hrOperation in shaded areas not recommended

erusserPtelnI

egnaR tnioPteS ycaruccAisp0.2

)rab41,0(isp0.3

)rab12,0(isp0.5

)rab43,0(isp0.01)rab96,0(

isp0.51)rab30,1(

isp0.02)rab83,1(

isp0.52)rab27,1(

CW"0.5-0.2 CW"0.3 CW"57.0 3584 5815 9995rabm5,21-89,4 rabm74,7 rabm78,1 731 741 071

CW"0.8-0.4CW"0.5

CW"15764 2355 8476 9958

CW"0.7 7894 7475 2846 4896

rabm39,91-69,9rabm54,21

rabm94,2231 751 191 342

rabm44,71 141 361 481 891

CW"0.82-0.8CW"0.01

CW"5.11065 7925 2266 0277 8648 8367

CW"0.52 3924 2764 7534 8584 6786 0227

rabm57,96-39,91rabm19,42

rabm47,3951 051 881 912 042 612

rabm72,26 221 231 321 831 591 402

CW"0.71-0.01CW"0.21

CW"22854 4895 9617 76301 82201 83801

CW"0.51 7924 0025 1117 8779 01301 84701

rabm53,24-19,42rabm98,82

rabm89,4031 961 302 492 092 703

rabm63,73 221 741 102 772 292 403

CW"0.82-0.41CW"0.51

CW"5.20704 7375 1628 11801 86021 41431 02131

CW"0.52 3213 7844 5766 7509 29701 80611 83921

rabm57,96-78,43rabm63,73

rabm32,6511 261 432 603 243 083 273

rabm72,26 88 721 981 652 603 923 663

isp1-57.0isp57.

isp52.03484 3527 8269 37511 33831 87251 83071

isp1 8364 6826 1059 75511 29831 35251 62071

rabm59,86-17,15rabm17,15

rab39,21731 502 372 823 293 334 284

rabm57,86 131 871 962 723 393 234 284

isp2-1isp5.1

isp3.02534 6378 92511 75931 41551 85371

isp0.2 5053 8857 18211 46731 15351 60271

rabm09,731-59,86rab01,0

rabm96,02321 742 623 593 934 294

rab41,0 99 512 913 093 534 784

isp3-5.1isp0.2

isp4.09293 4308 93311 17831 66451 23371

isp0.3 7506 42901 62631 72351 25271

rab12,0-01,0rab41,0

rabm05,72111 822 123 393 834 194

rab12,0 271 903 683 434 984

isp5-3isp5.3

isp5.07053 18701 89531 56351 23371

isp0.5 9369 29721 28641 88661

rab43,0-12,0rab42,0

rabm83,4399 503 583 534 194

rab43,0 372 263 614 374

MK608 GAS PRESSURE REGULATOR

Page 5: GIlson Engineering Catalog · Jordan Valve, a Division of Richards Industries 3170 Wasson Road • Cincinnati, Ohio 45209 Telephone 513-533-5600 • Fax 513-871-0105 Toll-FreeTelphone:

erusserPtelnI

egnaR tnioPteS ycaruccAisp0.2

)rab41,0(isp0.3

)rab12,0(isp0.5

)rab43,0(isp0.01)rab96,0(

isp0.51)rab30,1(

isp0.02)rab83,1(

isp0.52)rab27,1(

CW"0.5-0.2 CW"0.3 CW"57.0 2935 1675 6666rabm5,21-89,4 rabm74,7 rabm78,1 351 361 981

CW"0.8-0.4CW"0.5

CW"15915 7416 8947 4559

CW"0.7 1455 5836 2027 0677

rabm39,91-69,9rabm54,21

rabm94,2741 471 212 172

rabm44,71 751 181 402 022

CW"0.82-0.8CW"0.01

CW"5.13226 5885 8537 8758 8049 6848

CW"0.52 0774 1915 1484 8935 0467 2208

rabm57,96-39,91rabm19,42

rabm47,3671 761 802 342 662 042

rabm72,26 531 741 731 351 612 722

CW"0.71-0.01CW"0.21

CW"21905 9466 5697 91511 56311 24021

CW"0.51 5774 8775 1097 46801 65411 24911

rabm53,24-19,42rabm98,82

rabm89,4441 881 622 623 223 143

rabm63,73 531 461 422 803 423 833

CW"0.82-0.41CW"0.51

CW"5.23254 4736 9719 31021 90431 40941 87541

CW"0.52 0743 6894 6147 36001 19911 89821 67341

rabm57,96-78,43rabm63,73

rabm32,6821 081 062 043 083 224 314

rabm72,26 89 141 012 582 043 563 704

isp1-57.0isp57.

isp52.02835 9508 89601 95821 07351 67961 13981

isp1 3515 4896 65501 14821 63451 84961 81981

rabm59,86-17,15rabm17,15

rab39,21251 822 303 463 534 184 635

rabm57,86 641 891 992 463 734 084 635

isp2-1isp5.1

isp3.05384 6079 01821 80551 83271 68291

isp0.2 5983 1348 43521 39251 65071 81191

rabm09,731-59,86rab01,0

rabm96,02731 572 363 934 884 645

rab41,0 011 932 553 334 384 145

isp3-5.1isp0.2

isp4.05634 7298 99521 21451 58171 85291

isp0.3 1376 83121 04151 03071 96191

rab12,0-01,0rab41,0

rabm96,02421 352 753 634 784 545

rab12,0 191 443 924 284 345

isp5-3isp5.3

isp5.07983 97911 90151 27071 85291

isp0.5 01701 41241 41361 34581

rab43,0-12,0rab42,0

rabm83,43011 933 824 384 545

rab43,0 303 204 264 525

2” MK608 FLOW CAPACITIES

Nitrogen at 0.97 s.g. in scfh and Nm3/hrOperation in shaded areas not recommended

MK608 GAS PRESSURE REGULATOR

Page 6: GIlson Engineering Catalog · Jordan Valve, a Division of Richards Industries 3170 Wasson Road • Cincinnati, Ohio 45209 Telephone 513-533-5600 • Fax 513-871-0105 Toll-FreeTelphone:

ORDER SCHEMATIC

How to order a MK608 Series Gas Pressure Regulator (1-1/2” - 2”).

MK608/1102/3K/ABMK608 GAS PRESSURE REGULATOR

1 ledoM

806 ledoM

2 eziS

sehcnI ND051 "2/1-1 04ND002 "2 05ND

4 snoitcennoCdnE2&1TP TPNTB TPSBPB PPSBWS WSF5F EF#0513F EF#0035I #051EFIZZ dradnatS-noN

6 egnaR6&5

.C.W rabm70 .c.w"5-2 rabm5,21-89,480 .c.w"8-4 rabm39,91-69,990 .c.w"82-8 rabm57,96-39,9101 .c.w"71-01 rabm53,24-19,4211 .c.w"82-41 rabm57,96-78,4321 isp1-57.0 rabm59,86-17,1531 isp2-1 rabm09,731-59,8641 isp3-5.1 rab12,0-01,051 isp5-3 rab43,0-12,0ZZ dradnatS-noN

8 gnihsuB01&9

FT nolfeTGC etihparGnobraCZZ dradnatS-noN

7 rotautcA8&7

DS dradnatSZZ dradnatS-noN

1—

2—

3/

4 5 6 7 8806 002 SC TP NV 80 DS FT

5 mgarhpaiD&taeS4&3

NB N-anuBNV notiVNE MDPE

3 lairetaMydoBRB eznorBSC )BCW(leetSnobraC6S )M8FC(leetSsselniatS