glass ceramic esd suppressor - abracon · glass ceramic esd suppressor agcesd 30332 esperanza,...
TRANSCRIPT
Glass Ceramic ESD SuppressorAGCESD
STANDARD SPECIFICATIONS:
APPLICATIONS:FEATURES:
30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 09.23.14Visit www.abracon.com for Terms & Conditions of Sale
• IC Module • RF Antenna • TV/STB• HDMI/USB3.0
• Ultra low capacitance • High cut-off frequency • Quick response time • Low clamping voltage
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS ISO9001:2008 CERTIFIED
0.6 x 0.3 x 0.3mm, 1.0 x 0.5 x 0.5mm,1.6 x 0.8 x 0.8mm
Pb RoHS/RoHS II compliant
Part No. VDC Trigger
Voltage VT Clamping Voltage Vc
Cut-off Frequency @-0.3dB
Cp@1 Vrms, 1MHz
ESD Pulse withstand
V V V GHz pF pulses
AGCESD-0603-090-R10 9 100~300 30 7.0 0.05~0.10 1000(Typical)
AGCESD-1005-090-R10 9 100~300 30 7.0 0.05~0.10 1000(Typical)
AGCESD-1608-090-R10 9 100~300 30 7.0 0.05~0.10 1000(Typical)
Test Standard
VDC: Maximum continuous DC working voltage VT: The breakdown Voltage across the GESD according IEC61000-4-2 8KV contact discharge Vc: Maximum peak voltage across the GESD measured at 30ns after initiation of pulse on IEC61000-4-2 8KV
ESD Pulse Withstand: According IEC61000-4-2 8KV contact discharge and 15 KV air discharge.
Operating Temperature: -55ºC to +125ºC Storage Temperature: -10ºC to +40ºC, 70% RH max. in tape and reel
ELECTRICAL CHARACTERISTICS CURVES
Glass Ceramic ESD SuppressorAGCESD
30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 09.23.14Visit www.abracon.com for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS ISO9001:2008 CERTIFIED
0.6 x 0.3 x 0.3mm, 1.0 x 0.5 x 0.5mm,1.6 x 0.8 x 0.8mm
Pb RoHS/RoHS II compliant
PART IDENTIFICATION
AGCESD- - - -
Dimension Code Voltage
Code Capacitance
Code
Packaging
0201: 0.6 x 0.3 x 0.3mm 090: 9V R10: 0.10pF T: 15kpcs/reel for 0201
10kpcs/reel for 0402 4kpcs/reel for 0603
0402: 1.0 x 0.5 x 0.5mm
0603: 1.6 x 0.8 x 0.8mm
Dimension: mm
Dimension L W T a A B C
0201 0.6±0.05 0.3±0.05 0.3±0.05 0.15±0.05 0.20~0.30 0.20~0.30 0.30~0.35
0402 1.0±0.15 0.5±0.15 0.5±0.15 0.25±0.10 0.45~0.55 0.40~0.50 0.45~0.55
0603 1.60±0.15 0.80±0.15 0.80±0.15 0.30±0.20 0.60~0.80 0.60~0.80 0.60~0.80
Glass Ceramic ESD SuppressorAGCESD
30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 09.23.14Visit www.abracon.com for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS ISO9001:2008 CERTIFIED
0.6 x 0.3 x 0.3mm, 1.0 x 0.5 x 0.5mm,1.6 x 0.8 x 0.8mm
Pb RoHS/RoHS II compliant
OUTLINE DIMENSION:
Materials
No. Components Material 1 Glass Body 2 Internal Electrode Ag
3 Terminal Electrode Inside: Ag Outside: Ni-Sn
8.4±1.5mm
Glass Ceramic ESD SuppressorAGCESD
30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 09.23.14Visit www.abracon.com for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS ISO9001:2008 CERTIFIED
0.6 x 0.3 x 0.3mm, 1.0 x 0.5 x 0.5mm,1.6 x 0.8 x 0.8mm
Pb RoHS/RoHS II compliant
REFLOW PROFILE:
TAPE & REEL:
260 ˚C
60~90sec .
60~120sec .
150 ˚C
200 ˚C
217 ˚C Max Ramp Up Rate=3 ˚C/sec .
Max Ramp Down Rate=6 ˚C/sec .
Time 25 � to Peak =8 min max 25 ˚C
Peak 260 � max
• Preheat condition: 150 ~200oC/60~120sec. • Allowed time above 217 oC: 60~90sec. • Max temp: 260 oC • Max time at max temp: 10sec. • Solder paste: Sn/3.0Ag/0.5Cu • Allowed Reflow time: 2x max
T= tape and reel (15kpcs/reel for 0201, 10kpcs/reel for 0402, 4kpcs/reel for 0603)
Dimension: mm
Type A B P T max
0201 0.40±0.1 0.7±0.1 2.0±0.05 0.55
0402 0.65±0.1 1.15±0.1 2.0±0.05 0.8
0603 1.0±0.2 1.8±0.2 4.0±0.1 1.1
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.