glass wall - sweets...5. hinged closure panel –enables access between rooms. 6. mechanical bottom...
TRANSCRIPT
W O R L D L E A D E R I N F L E X I B L E S P A C E M A N A G E M E N T
GLASS WALLMOVABLE PARTITIONS
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT www.hufcor.com
MODEL CONFIG.TOP SEALS
FIXED RETRACTFLOOR SEALS
RETRACT FIXED VERT.TRIM
MAX.1
HEIGHTS
MAX. OPENING
WIDTHSTC2 ACOUS.
RATINGS
PairedFrameless
Frameless
Timber-Framed
Timber-Framed
Acoustically Rated Ultra
Acoustically Rated Ultra
std n/a stdn/a opt 10'5" [3.2m] Unlimited n/a
Single std n/a stdn/a opt 10'5" [3.2m] Unlimited n/a
SERIES #
GL2
GL1
Paired std n/a stdn/a n/a 10'2" [3.1m] Unlimited n/a
Single std n/a stdn/a n/a 10'2" [3.1m] Unlimited n/a
GT2
GT1
Pairedstd stdoptn/a std 12'2" [3.7m]
Single36, 45
GA2
GA1
Acoustically Rated Ultra
Acoustically Rated Ultra
Pairedstd stdstdn/a std 12'2" [3.7m]
Single
26 PanelsWith 2 LCP
Panels
26 PanelsWith 2 LCP
Panels46
GA2
GA1
Hufcor glass walls are clearly visionary.Our movable glass partitions allow natural light to flood an interior
space while providing space flexibility. With your choice of clear
tempered, full satiny translucent, etched, or custom glass, our walls
can become the signature design element of your room. Satisfied
customers are using glass partitions to close off offices, storefronts,
restaurants, bank lobbies and library training centers, creating secure,
flexible spaces.
1Heights shown are standard. Contact your local Hufcor distributor for custom sizes. 2n/a = not available
GLASS WALL PRODUCT SELECTOR
main imageColor matched aluminum or timber panels can also be used for acoustical separation as shown at this meeting space in Texas.
insets (top to bottom)Hufcor partitions easily & effectively close off the narthex at the St. Joseph’s Catholic church in Maryland.
Wisconsin Center for Discovery installed frameless glass walls to create large meeting areas open to the building’s multi-story atrium.
A library uses a large Hufcor glass slider with custom graphics to close the entrance to the children’s wing.
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
MOVABLE PARTITIONSGlass Wall
2
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT www.hufcor.com
EDGE-ACTIVATED THROW BOLT LOCATED APPROX. 36" FROM FINISHED FLOOR
STAINLESS STEEL DUST-PROOFSTRIKE PLATE/FLOOR PIN
1-3/8" [35]
1-3/4" [44]
1-3/8" [35]
GT1 Single .eps
1-3/8" [35]
1-3/4" [44]
1-3/8" [35]
GT2 Paired .eps
Footbolt engages in floor receptacle to ensure
panel-to-panel alignment and stability.GT1 Single GT2 Paired
VERTICAL SECTIONSTimber-Framed Glass Wall consists
of glass surrounded with a wood frame. Each wood frame is
composed of triple laminated solid wood top and bottom rails
and stiles that are constructed from custom made veneers. Solid
wood edges and an engineered wood core ensure sturdy, durable
construction. Choose wood frames made of oak, maple, cherry, or
Douglas fir. Frames may also be customized. The wood is stained
and finished with a matte coat of polyurethane with colors selected
from Hufcor’s standard color selector. Panels may be ordered as
single or paired panels. Single (or omni-directional) panels may
be used in alternate locations or stacked in a remote location.
Paired panels are a good choice when the partition goes from
wall-to-wall. Pivot panels allow access between rooms. Optional
in-line pass doors are available on single (omni) models. Panels
are shipped fully assembled.
main imageA major insurance headquarters uses Hufcor timber-framed custom glass walls.
insets (left to right) Hilton’s Hampton Inn lobby breakfast area is divided by timber-framed glass movable walls.
This Napa Valley restaurant uses raised panel bottom sections to divide this small banquet room with Hufcor timber-framed custom glass walls.
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
TIMBER-FRAMEDGlass Wall
TIM
BER
FR
AM
ED
G
LA
SS W
ALL
3
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT www.hufcor.com
3/4" [19]
1/2" [13]
1 5/8" [40]
1 " [25]
GL2 VertModified .eps
[13]
[44]
Shown with Standard Horizontal Rail
Shown with Optional Stainless Steel Clad Rail
GL2 Paired Panel GL1 Individual Panel
BIM REVIT® FAMILIES NOW AVAILABLECONTACT YOUR LOCAL HUFCOR DISTRIBUTOR FOR ASSISTANCE OR VISIT www.hufcor.com/gl-bim
Frameless Glass Wall consists of glass panels
mechanically fastened to horizontal top and bottom rails. The glass
has polished edges and no vertical trim – although vertical trim
is an available option. Panels may be ordered as single or paired
panels. Single (or omni-directional) panels can be used in alternate
locations or stacked in a remote location. Paired panels are a
good choice when the partition goes from wall-to-wall. Pivot
panels allow access between rooms. Optional in-line pass doors
are available on single (omni) models. The standard horizontal rails
are of clear anodized aluminum but may be custom finished. Panels
are shipped fully assembled.
NOTE: There will be a gap of 1/4"-1/2" [6-13] between the glass panels when they are in place to prevent glass-to-glass contact. The gap varies due to glass industry tolerances.
main image
Wisconsin Center for Discovery installed frameless glass walls to create large meeting areas open to the building’s multi-story atrium.
insets (left to right) Retailer and concession storefront glass wall systems, including radius tracks, are all available from Hufcor.
Kohler’s Chicago showroom uses Hufcor frameless systems at their Merchandise Mart entrance.
Leading restaurant chain, Buffalo Wild Wings features a storefront frameless glass wall system.
VERTICAL SECTIONS
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
All panels are supplied with concealed foot bolts and interlocking mechanisms. Footbolt engages in floor receptacle to ensure panel-to-panel alignment and stability.In-Line Pass Door
FRAMELESS FEATURES
FR
AM
ELESS G
LA
SS W
ALL
FRAMELESS Glass Wall
4
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT www.hufcor.com
BIM REVIT® FAMILIES NOW AVAILABLECONTACT YOUR LOCAL HUFCOR DISTRIBUTOR FOR ASSISTANCE OR VISIT www.hufcor.com/gl-bim
3/4" [19]
1/2" [13]
1 5/8" [40]
1 " [25]
GL2 VertModified .eps
CEI
LIN
G H
EIG
HT
FRO
M T
OP
OF
CO
NC
. SLA
B
VER
IFY
F.F. T
HIC
KNES
S
38" HANGER ROD(S)(ROD LENGTH MAY VARY)
SUSPENSION PLATE,BY HUFCOR (TYP.)
12" GLASS
CLEAR-TEMPERED(TYP.)
CONC. ANCHORSBY OTHERS
main imageWhen closed, Hufcor glass wall sliders feature the Oklahoma State logo and secure the cafeteria.
insets (left to right) Diageo Corporation’s Latin America headquarters in Miami with a slidding glass door system.
Morris & Co. uses a pocket slider to close off the gift shop at Fontainebleau Resort’s lobby.
Slider tracks can be used with Hufcor timber-framed glass walls as well.
Sliding Glass Walls Hufcor frameless and
timber-framed glass walls make perfect sliding glass door
systems. Top hung to eliminate floor tracks, these systems
make convenient closures. Based on the track system and
design, the Hufcor sliding glass doors can stack exposed, some
within wall pockets and others with side-by-side telescoping
tracks.
Custom-designed for each opening, these door systems
eliminate floor tracks traditionally found with sliding pocket
doors. With Hufcor’s Unispan overhead support system,
these door systems can be designed to create “barn door” or
“pocket door” sliders up to 40' [12.2m] long without the need
for traditional overhead supports.
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
VERTICAL SECTIONS
GL1S Type 46 Side-by-Side Track
Up to Five (5) Tracks Available
GL1S SliderShown with Standard
Horizontal Rail
SLID
ING
G
LA
SS W
ALL
SLIDING DOORSGlass Wall
5
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT www.hufcor.com
BIM REVIT® FAMILIES NOW AVAILABLECONTACT YOUR LOCAL HUFCOR DISTRIBUTOR FOR ASSISTANCE OR VISIT hufcor.com/ga-ultra-bim.
is Hufcor’s next generation of acoustically rated moveable glass partition systems with sound ratings of STC 36, 45 and 46. The durable frame is of steel and aluminum and is powder coated in a clear satin metallic finish.
STC 45 and 46 models include enhanced 2” [51] double-laminated sealed I.G. glass to achieve the ultimate acoustical performance. The STC 46 bottom seal has both retractable and sweep seals. The STC 36 model include single pane tempered glass and comes with sweep bottom seals and optional retractable seals.
All models are available as single panels or pairs with an expanding jamb or hinged closure. Options include an ADA compliant pass door with panic hardware, custom colors, and more.
GA-ULTRA ACOUSTIC GLASS WALL HUFCOR "SMARTER" BIM REVIT® FAMILIES
◆ Acoustic Glass Wall Paired Panels - Tamarack Center - NATC (Rhinelander, WI)
◆ Acoustic Glass Wall Paired Panels - Tamarack Center - NATC (Rhinelander, WI)◆ Acoustic Glass Wall Paired Panels - Tamarack Center - NATC (Rhinelander, WI)
glass wallCLEARLY VISIONARYNote: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
can adjust minimum clearance dimensions to account for accessories like pass doors and panic hardware with simple, easy-to-use check boxes.
ULTRA ACOUSTIC Glass WallU
LT
RA
AC
OU
ST
IC - G
LA
SS W
ALL
6
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT www.hufcor.com
HUFCOR
HUFCOR
HUFCOR
HUFCOR
HUFCOR
HUFCOR
VERTICAL SECTIONS (GA-ULTRA)
GA1 (Omni Panel) & GA2 (Paired Panels)Sealed IG Unit - STC 45 / 46 (Shown With Pass Door & Lever Closure Panel)
GA1 (Omni Panel) & GA2 (Paired Panels)Single Glass- STC 36 (Shown With Pass Door & Lever Closure Panel)
HORIZONTAL SECTIONS (GA-ULTRA)
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
1. Lever Closure Panel – An expanding jamb seals the panels in the opening. When not in use, nothing remains in the opening.
2. Inset Pass Doors – Enables access between rooms. (ADA compliant)
3. Mullions – Allows for segmented faces.
4. Solid or Sound Absorptive Faces – Adjacent panels can contain solid or acoustic absorptive materials.
5. Hinged Closure Panel – Enables access between rooms.
6. Mechanical Bottom Seal – Quick-set Hufcor seal systems available. (Required for STC 46 & Optional for STC 36 & 45.
GA1 (Omni Panel)Single Glass - STC 36
GA1 (Omni Panel)Sealed IG Unit - STC 46
GA1 (Omni Panel)Sealed IG Unit - STC 45
Optional Features - STC 36 & 45Retractable Bottom Seal Or Bottom Sweeps
(1" or 2" Floor Clearance Available)
Required Features - STC 46:Retractable Bottom Seal & Sweeps(1" or 2" Floor Clearance Available)
GA2 (Paired Panels)Single Glass - STC 36
GA2 (Paired Panels)Sealed IG Unit - STC 46
GA2 (Paired Panels)Sealed IG Unit - STC 45
AVAILABLE OPTIONS FOR ACOUSTIC GLASS WALL
Single GlassSealed IG
UnitSealed IG
Unit
Single Glass
Sealed IG Unit
Retractable Bottom SealRetractableBottom SealBottom Sweeps Bottom Sweeps
ULTRA ACOUSTICGlass Wall
ULT
RA
AC
OU
ST
IC - G
LA
SS W
ALL
7
F-2016GL HUFUP 5M 2/16 Printed in U.S.A.
*USGBC and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
Hufcor offers continuing education programs for AIA members. Contact your Hufcor representative for details.
Hufcor Partition U.S. Patents:2,861,660 3,056,193 3,223,147 3,295,257 3,295,588 3,450,185 3,638,376 3,755,968 3,783,930 3,879,799 3,042,960 4,014,1375,181,296 5,230,123 5,406,676 5,481,834 5,564,759 6,112,466 6,167,937 8,468,751
Hufcor has a program of continuous product improvement. As a result, some products may be modified from those represented in this catalog.
The Hufcor Commitment to Green Manufacturing, Sustainability and LEED. Hufcor is committed to being an industry leader when it comes to protecting the environment by reducing pollutants and minimizing our environmental impact on air, water and land. For over a decade Hufcor has utilized a “Green” approach to manufacturing and energy consumption and has increased the percentage of materials that we recycle, reuse, repair, restock or return for salvage. Today the Hufcor commitment and progress toward Green manufacturing is greater than ever. We continue to develop standards that support various LEED (Leadership in Energy and Environmental Design) points to assist the achievement of LEED certification goals.
The quality systems of Hufcor’s U.S. manufacturing facilities are registered to the ISO 9001 standards,
WORLDWIDE HEADQUARTERS PO Box 5591 / 2101 Kennedy Road, Janesville, WI 53547Toll-Free: 800-542-2371, ext. 214 Telephone: 608-756-1241Fax: 608-758-8253 E-mail: [email protected]
IT’S ALL IN THE BOOK More details on all Hufcor products are available in the Architectural Product Manual. Call your local rep today to receive a complimentary copy. Or visit www.hufcor.com to sign-up for the interactive digital version.
main imageThe Wit Hotel in Chicago uses custom acrylic sheeting to divide a private area of their luxury hotel bar.
insets (top to bottom)Art glass has been used successfully within Hufcor’s glass systems. Shown are panels at the Georgia Aquarium using custom Meltdown glass sculpture.
3Form® Varia Ecoresin artistic sheets create stunning space dividers as shown at Cooper’s Hawk restaurant. The Varia sheeting can be installed into any Hufcor movable glass wall system.
Different laminated glass continues to be used within the Hufcor glass wall systems. A leading healthcare company chose a custom yellow and white inner layer for convenient writing surfaces.
Hufcor movable glass wall partitions offer designers the full palette of material options to create multipurpose interior spaces that pop. Here are a few examples of different materials that can be used within the full line of Hufcor glass wall products.
innovationYOU GET MORE WITH HUFCOR
INN
OV
AT
ION