gloombox - laserox · 2 use an exacto knife to cut the bits connecting the parts to the frame....
TRANSCRIPT
Compatible with Gloomhaven®GloomBoxAssembly Guide
This box organizer is compatible with Gloomhaven™ 1st and 2nd edition.This product is not licensed, and is up for change at any time in thefuture.
2
Use an exacto knife to cut the bits connecting the parts to the frame.
Remove the parts from the frame with a rotating motion along the axis formed by the bits you just cut.
Use the exacto knife to remove any of the remaining connection bits.
Always dry-fit the parts to together without any glue to make sure you are assembling the correct parts.
Use a drop of glue along the joints and hold it in place until the glue has sufficiently dried.
Use wood glue for assembly.Always dry fit the parts first to make sure the components are correct ones. If you encounter any issues, please contact us at [email protected] or our Facebook page at facebook.com/laseroxinserts
3
Part numbersWe use the following codes to refer to individual parts in our assembly guide:
4
5
Big BoxRequired parts: Unnumbered Big Box Parts
Miniatures BoxRequired parts: E1, E2, E3, “Miniatures Box” Lid
E1
E2
E2
E3
E3
Miniatures BoxLid
6
Cards BoxRequired parts: L1, S1, S2, S3, T1, T2, SP1, SP2
S1
T1
L1
T2
T1
S2
S2
S3 Optional(do not glue!)
DividersUse them as you like
7
XP, Damage, Summon Box - BottomRequired parts: J1, J2, J3, O1
XP, Damage, Summon Box - TopRequired parts: I1, I2, I3, R1, R6
XP, Damage, Summon - AssemblyRequired parts: “XP, Damage, Summon” Lid
J1
O1 J2
J2
J3
J3
I1R6 R1
R1I2
I2
I2I2
I3
I3
XP, DamageSummon lid
8
Coins and Signs Box - ARequired parts: M3, M4, M5, Q1
Coins and Signs Box - BRequired parts: M1, M2, Q2
Coins and Signs Box - BaseRequired parts: K1, K2, K3, K4, K5
Coins and Signs Box - AssemblyRequired parts: N1
9xQ1
M3
M5
M5
M4
9xQ2
M1
M2
K1
K5
K4
K3K2
K2
Watch for good orientaion (Engraving outside)
N1
9
Big Map Tiles BoxRequired parts: D1, D2, D3, D4, D5, H2, H6, H7, “Big Map Tiles” Lid
H2
H2
H7H6
D2
D3
D5
D4 Big Map Tiles Lid
D1
10
Small Map Tiles BoxRequired parts: C1, C2, C3, H1, H3, H4, H5, “Small Map Tiles” Lid
C1
H5H5
H1H3H4
C2
C2
C4
C3Small Ma
p Tiles
Lid
11
Traps, Obstacles, Treasures BoxRequired parts: F1, F2, F3, F4, F5, G1, G2, G3, G4, G5, G6, G7, G8, G9, G10, G17, G18, “Traps, Obstacles, Treasures” Lid
G10G17
G9
G3 G7 G8
G2
G18G1
G6G4
G5
F1
F4
F5F2
F3
Traps, Ob
stacles,
Treasures
Lid
12
Boxes assembly
Traps, Obstacles, Treasures Box
Small Map Tiles Box
Big Map Tiles Box
13
Monster Box - Bottom/InlayRequired parts: P1, P2, P3, P4, P5, P6, P7
Monster Box - Bottom/BaseRequired parts: B1, B2, B3, B4, O2, O3, O4, O5, O6, O7, O8
P7 P5
P6
P6 P1 P2
P2P3
P4
O8O8
O4O5O2
O3
O6O7O7
B1
B4
B4
B2
B3
Inlay
14
Monster Box - TopRequired parts: A1, A2, A3, A4, G11, G12, G13, G14, G15, G16, R2, R3, R4, R7, S4,“Monster Box” Lid
S4
R2
G12
R3
R3
G11
G13
G16
G14
G15
R7
R4 R4
A2
A1
A1
A1
A1
A3
A4
Monster Box Lid
15
Monster Box - Assembly
Put into the boxAssemble the boxes according to the picture below, and pack them inside your original Gloomhaven® box.
16
Assortment of elements in the boxes:
-Small Map Tiles Box-Traps, Obstacles, Treasures Box
-Big Map Tiles Box
-XP, Damage, Summon Box top & bottom
-Coins and Signs box