go! garden variety spider web quilt...2020/02/17 · floral print b (the sample quilt uses flower...

©2018 AccuQuilt PQ11530 Page 1 of 4

GO! Garden Variety Spider Web Quilt Finished Size 44" x 44"

Fabrics provided by Moda Fabrics.

GO!® Dies Used, Number of Shapes to Cut & Fabric Requirements

***Use Stack and Slide method for cutting out trapezoid and triangle shapes.

Fabric Color

Shape GO! Dies Used Number of Shapes to Cut Fabric Required

White GO! Spider Web-6" Finished (55487)

Cut 8—4" x width of fabric (WOF) strips. Fanfold into 4" widths over kite shape on die. Sub cut into 72 kites.

1¾ yards

Green #1

GO! Spider Web-6" Finished (55487)

Cut 7—3" x WOF strips. Layer strips RIGHT SIDE DOWN over large trapezoid shape on die up to six layers. Sub cut into 72 shapes.

5/8 yard

Green #2


Cut 7—3" x WOF strips. Layer strips RIGHT SIDE UP over large trapezoid shape on die up to six layers. Sub cut into 72 shapes.

5/8 yard


Blue #1 GO! Spider Web-6" Finished (55487)

Cut 6—2¾" x WOF strips. Layer strips RIGHT SIDE DOWN over medium trapezoid shape on die up to six layers. Sub cut into 72 shapes.

½ yard

Blue #2 GO! Spider Web-6" Finished (55487)

Cut 6—2¾" x WOF strips. Layer strips RIGHT SIDE UP over medium trapezoid shape on die up to six layers. Sub cut into 72 shapes.

½ yard

Pink #1


Cut 4—2½" x WOF strips. Layer strips RIGHT SIDE DOWN over triangle shape on die up to six layers. Sub cut into 72 shapes.

¼ yard

Pink #2 GO! Spider Web-6" Finished (55487)

Cut 4—2½" x WOF strips. Layer strips RIGHT SIDE UP over triangle shape on die up to six layers. Sub cut into 72 shapes.

¼ yard

Additional Cutting Instructions:

• Green Plaid —5/8 Yard o Use GO! Strip Cutter-1 ½" (1" finished) (55024) to cut 4—1 ½" x WOF for

inner borders. o Use GO! Strip Cutter-2 ½" (2" finished) (55014 or 55017) to cut 5—2 ½"

x WOF—set aside for binding.

• White Floral—yardage included above o Use GO! Strip Cutter-3 ½" (3” finished) (55032) to cut 5—3 ½" x WOF for

outer borders.


Additional Fabrics Needed:

• Batting: 54" x 54"

• Backing: 54" x 54"

Sewing Directions: Follow pressing directions carefully and use ¼” seams, unless otherwise indicated.

1. Pin and sew white kite shape to green #2 trapezoid shape as shown. Press seam to green. Make 72 white/green units.

2. Pin and sew green #1 trapezoid shape to white/green unit as shown. Press seam to white. Make 72 white/green/green units.

3. Pin and sew blue #2 and blue #1 shape to white/green/green unit as shown. Press seam to blue #2 and green #1. Make 72 white/greens/blues units.

4. Pin and sew pink #2 and pink #1 triangle shape to white/greens/blues/ unit as shown. Press seam to pink #2 and blue #1. Make 72 half block unit.

5. Pin and sew half block units as shown. Seams will nest if pressed according to directions. Press this seam open. Make 36 blocks.


Assemble the Quilt Top:

1. Lay out blocks in six rows of six, rotating blocks as shown. Sew the horizontal rows. Press seams to one side.

2. Pin and sew horizontal rows together. Press seam to one side.

3. Measure quilt from top to bottom. Cut 2 green plaid strips to that length and sew to right and left side of quilt top. Press to green plaid.

4. Measure quilt from left to right. Cut 2 green plaid strips to that length and sew to top and bottom of quilt top. Press to green plaid.

5. Repeat steps 3 and 4 with white floral for outer border. Press to outer border.

Quilt Finishing:

1. Layer quilt top, batting and backing. 2. Pin or baste layers together. 3. Quilt as desired. 4. Add binding, mitering corners.

of 6 ©2016 AccuQuilt PQ11043

GO! Qube 9" Criss Cross Quilt Finished Quilt Size: 54½" x 54½" Finished Block Size: 18" x 18"

Fabrics are from the

Flower Power Collection by

Dear Stella.

For use with GO! Qube™

Mix & Match 9" Block

(55777) and GO! Qube™

9" Companion Set-

Corners (55786) OR GO!

Qube™ 9" Companion

Set-Classics (55781)

Dies Needed: GO! Qube Mix & Match 9" Block (55777)

• GO! Half Square Triangle-2¼" Finished Square (Shape 5)

• GO! Parallelogram 45°-215/16" x 37/8" Sides (2¼" x 3 3/16" Finished) (Shape 7)

GO! Qube™ 9" Companion Set-Corners (55786) OR GO! Qube™ 9" Companion Set-Classics (55781)

• GO! Chisels-2¼" x 4½" Finished) (Shape 9)

• GO! Signature Block-4½" Finished (Shape 10)

Additional Dies Needed: GO! Strip Cutter-2¼" (1¾" Finished) (55053)


Fabric Requirements and Cutting Instructions

Fabric Color and Yardage Shapes to Cut Number of Shapes to Cut

Dark pink polka dot print (The sample quilt uses Polka Dot Stella-187 Peony from Dear Stella's Flower Power collection.)

2 yards

• Cut 3—4" x width of fabric

(WOF) strips. Fanfold into

3¼" widths and sub cut 72—

half square triangles (HSTs).

• Cut 36 parallelograms with the

fabric right side up and 36

parallelograms with the fabric

wrong side up.

• Cut 6—2¼" x WOF strips for

binding using GO! Strip Cutter-

2¼" (1¾" Finished) (55053)

Medium pink polka dot print (The sample quilt uses Polka Dot Stella-187 Coral from Dear Stella's Flower Power collection.)

7/8 yard

• Cut 2—51/2" x WOF strips.

Fanfold into 3¼" widths and

sub cut 20 chisels with the

fabric right side up.

• Cut 3—4" x WOF strips.


sub cut a total of 72—half

square triangles (HSTs).

Medium light pink print (The sample quilt uses Flower Crush Stella-668 Raspberry from Dear Stella's Flower Power collection.)

3/8 yard




fabric wrong side up.

Light paisley print (The sample quilt uses Paisley Dream Stella-666 White from Dear Stella's Flower Power collection.)

3/8 yard




fabric wrong side up.

Light abstract print (The sample quilt uses Abstract Petals Stella-667 White from Dear Stella's Flower Power collection.)

3/8 yard




fabric right side up.


Solid White

(The sample quilt uses Stella White from Dear Stella's Flower Power collection.)

1 yard




fabric right side up and 36

chisels with the fabric wrong

side up.

Floral print A

(The sample quilt uses Floral Wash Stella-663 Multi from Dear Stella's Flower Power collection.)

1 3/8 yards

• Cut 8—5½" x WOF strips.

Fanfold into 5½" widths and

sub cut a total of 52—

signature blocks.

Floral print B (The sample quilt uses Flower Power Stella-664 Multi from Dear Stella's Flower Power collection.)

1/2 yard

• Cut 3—5½" x WOF strips.

Fanfold into 5½" widths and

sub cut a total of 20—

signature blocks.

Floral print C for backing (The sample quilt uses Flower Power Stella-664 Multi from Dear Stella's Flower Power collection.)

3 yards

• Remove selvages. Cut 1 yard from yardage. Sub-cut the cut yard into two 20"-22" x 36" sections. Join the sections together along one short edge. Join the sections to the remaining yardage along one long edge. Press the seams open.

Batting 62" x 62"

Sewing Instructions Press seams open and use ¼" seams, unless otherwise indicated. Be careful not to stretch bias edges.

Make Block A

1. Select one floral print A and one floral print B 4½" finished signature block (Shape 10), plus two medium pink 2¼" finished half square triangles (HSTs) (Shape 5) for each Center Unit A. Arrange the patches as shown. Join one HST to an adjacent short edge of each signature block. Join the signature block/HST sections together, matching seams. Press the seam open. Make a total of 20 of Center Unit A.


2. Select one white and one medium light pink print chisel (Shape 9), one dark pink polka dot parallelogram (Shape 7), and one dark pink polka dot 2¼" finished HST (Shape 5). Arrange the patches as shown. Join the parallelogram to the medium light pink chisel along the adjacent edge. Be sure to line up the parallelogram with the dog eared corner on the chisel. Press the seam open. Join the white chisel, and then the HST to the upper edge of the sewn unit, and press the seams open. Make a total of 20 of Triangle Unit A.

3. Select one white and one medium pink polka dot print chisel (Shape 9), one dark pink polka dot parallelogram (Shape 7), and one dark pink polka dot 2¼" finished HST (Shape 5). Arrange the patches as shown. Join the parallelogram to the medium pink polka dot print chisel along the adjacent edge. Be sure to line up the parallelogram with the dog eared corner on the chisel. Press the seams open. Join the white chisel, and then the HST to the right edge of the sewn unit, and press the seams open. Make a total of 20 of Triangle Unit B.

4. Arrange one Center Unit A, one Triangle Unit A, and one Triangle Unit B as shown. Sew each triangle unit to one long edge of the center unit, matching seams. Press the seams open. Repeat to make 20 Quarter Block A units.

5. Arrange four Quarter Block A units in two rows of two units each as shown. Join the units in each row together along adjacent edges, matching seams. Press the seam open. Join the two rows together, matching seams. Press the seam open. Make a total of 5 A Blocks.


Make Block B

1. Select two floral print A 4½" finished signature blocks (Shape 10) and two medium pink 2¼" finished HSTs (Shape 5) for each Center Unit B. Arrange the patches as shown. Join one HST to an adjacent short edge of each signature block. Join the signature block/HST sections together, matching seams. Press the seam open. Make a total of 16 of Center Unit B.

2. Repeat step 2 of “Make Block A”, using one white and one light paisley print chisel (Shape 9), one dark pink polka dot parallelogram (Shape 7), and one dark pink polka dot 2¼" finished HST (Shape 5), to make 16 of Triangle Unit C.

3. Repeat step 3 of “Make Block A”, using one white and one light abstract print chisel (Shape 9), one dark pink polka dot parallelogram (Shape 7), and one dark pink polka dot 2¼" finished HST (Shape 5), to make 16 of Triangle Unit D.

4. Arrange one Center Unit B, one Triangle Unit C, and one Triangle Unit D as shown. Sew each triangle unit to one long edge of the center unit, matching seams. Press the seams open. Repeat to make 16 Quarter Block B units.

5. Repeat step 5 of “Make Block A”, using four Quarter Block B units. Make a total of 4 B Blocks.


Assemble the Quilt Top

1. Referring to the quilt image below, arrange the blocks into three rows of three blocks each, alternating A and B blocks in each row. Join the blocks in each row along adjacent edges, matching seamlines. Press the seams open.

2. Join the rows together along adjacent edges, matching seamlines. Press the seams open or in one direction.

Finishing and Quilting

1. Layer the batting between the quilt top and backing, with the wrong sides facing the batting. Pin or baste the layers together. Quilt as desired.

2. Trim the batting and backing even with the quilt top edges.

3. Sew the binding strips together along the short ends, using either straight or diagonal seams. Press the strip in half lengthwise, with wrong sides together. Stitch the binding to the quilt front, matching raw edges and mitering corners. Fold the binding to the quilt back, encasing the raw edges. Hand stitch the binding to the quilt back.

©2017 AccuQuilt PQ11066

GO! Petal Power Table Topper

Finished Size 32" x 32"

Fabrics provided by Robert Kaufman

GO!® Dies Used, Number of Shapes to Cut & Fabric Requirements

Fabric Color Shape GO! Dies Used Number of

Shapes to Cut

Fabric Required

NOTE: Apply fusible web to the wrong side of asterisked fabrics following manufacturer’s instructions before cutting appliqué shapes.

Pink GO! Square-8½" (8" Finished) (55058)

Cut 1—9" x Width of Fabric (WOF) strip. Fan fold into 9" widths and sub cut 4—8½" squares.

¼ Yard

Dark Pink GO! Square-8½" (8" Finished) (55058)

Cut 1—9" x WOF strip. Fan fold into 9" widths and sub cut 4—8½" squares.

¼ Yard

Blue GO! Square-8½" (8" Finished) (55058)


¼ Yard

*Dark Blue GO! Circle-8" (55360)

Cut 1—8½" x WOF strip. Fan fold into 8½" widths and sub cut 4—8" circles. Sub cut 16 quarter circles.

⅔ Yard

Dark Blue GO! Strip Cutter-2½" (2" Finished) (55017 or 55014)

4—2½" x WOF strips for binding

Yardage included above

*White GO! Circle-8" (55360)

Cut 1—8½" x WOF strip. Fan fold into 8½" widths and sub cut 4—8" circles. Sub cut 16 quarter circles.

½ Yard

White GO! Square-8½" (8" Finished) (55058)



Additional Fabrics Needed:

• Backing Fabric —38” x 38"

• Batting—38" x 38"

• Fusible Web—1 yards

©2017 AccuQuilt PQ11066

Sewing Directions:

1. Lay out, fuse and appliqué two dark blue quarter circles on one blue 8½" square, as shown. Make four blocks.

2. Lay out, fuse and appliqué two dark blue quarter circles on one white 8½" square, as shown. Make four blocks.

3. Lay out, fuse and appliqué two white quarter circles on one pink 8½" square, as shown. Make four blocks.

4. Lay out, fuse and appliqué two white quarter circles on one dark pink 8½" square, as shown. Make four blocks.

5. Lay out blocks in four rows of four.

6. Pin and sew four rows, each with four blocks. Press seams in alternating directions for each row.

7. Pin and sew four row units tougher. Press seams toward the added rows.

Quilting and Finishing:

1. Layer batting between quilt top and backing.

2. Pin or baste layers together.

3. Quilt as desired.

4. Add dark blue binding, mitering corners.


GO! Qube 6" Breezy Buttons Quilt Finished Size: 53" x 53"

Fabrics are Birds of Liberty by Darlene Zimmerman, Kona White and Carolina Gingham and are provided by Robert Kaufman Fabrics


• GO! Square-2" (1½" Finished) (Shape 2)

• GO! Half Square Triangle-1½" Finished Square (Shape 5)

• GO! Rectangle-2" x 3½" (1½" x 3" Finished) (Shape 8)

Additional Dies Needed:

• GO! Strip Cutter-2" (1½" Finished) (55025)

• GO! Strip Cutter-2½" (2" Finished) (55017 or 55014)

• GO! Strip Cutter-3½" (3" Finished) (55032)


Fabric Requirements:

Fabric Color Total Yardage

White 2¼ yards

Scrappy Pinwheels Charm Pack or 5" precuts

Pink Gingham 2 yards

Red Floral 5/8 yard

Backing 3½ yards

Batting 63" x 63"

Cutting Directions:

Fabric Color Shape & Number

Number of Shapes to Cut Total Fabric Required

White

Cut 9—4" x width of fabric (WOF) strips. Fanfold into 4½" widths. Sub cut into 144—rectangles.

2¼ yards

White 5

Cut 5—5" x WOF strips. Fanfold into 2¾" widths. Sub cut into 288—1½" finished half square triangles (HSTs).


Charm Pack 5

Fold charm square (5" square) in half and place up to 3 folded squares on die with lengthwise grain going through the cutter. Be sure that fabric is covering the die blades. Sub cut into 144—1½" finished HSTs.

18—5" precut squares or

charms

Pink Gingham

5

Cut 3—5" x WOF strips. Fanfold into 2¾" widths. Sub cut into 144—1½" finished HSTs.

2 yards

Red Floral

Cut 2—4½" x WOF strips. Fanfold into 4½" widths. Sub cut into 49—2" squares.

5/8 yard

88

2



• Pink Gingham Sashing—Yardage included above o Use GO! Strip Cutter-2" (1½" Finished) (55025) to cut 14—2" x WOF

strips. Sub cut into 2" x 6½" rectangles. Cut 84 total. o Use GO! Strip Cutter-3½" (3" Finished) (55032) to cut 6—3½" x WOF

strips. Set aside for borders.

• Red Floral—Yardage included above o Use GO! Strip Cutter-2½" (2" Finished) (55017 or 55014) to cut 6—2½" x

WOF strips for binding. Additional Fabrics Needed:


• Backing: 3½ yards cut into 2—63" lengths. Sew back together along the 63" side.

Sewing Directions: Press all seams open and use ¼” seams, unless otherwise indicated.

1. Sew one white and one pink gingham 1½" finished half square triangle (HST) (Shape 5) together as shown. Press seam toward pink gingham triangle. Make 144 HST units.

2. Sew one HST unit from Step 1 to opposite short sides of a white 2" x 3½" rectangle (Shape 8) together as shown to make one 2" x 6½" rectangle. Press towards HST. Make 72 units.

3. Sew one white and one aqua (cut from Charm Pack) 1½"

finished HST (Shape 5) together as shown. Press seams toward aqua HST. Make 144 HST units.

4. Sew 2—1½" finished HSTs from Step 3 together as shown

to make one 2" x 3½" rectangle. Press seams toward aqua triangle. Make 72 units.


5. Sew two matching units from Step 4 together to make a 3½" unfinished pinwheel. Press the seams towards the aqua HST and spin the center points on the back. Make 36 units.

6. Sew one white 2" x 3½" rectangle to opposite sides of

pinwheel from Step 5 as shown to make one 3½" x 6½" unfinished rectangles. Press seams toward rectangles. Make 36 units.

7. Sew one unit from Step 2 to opposite sides of one unit from

Step 6 as shown to make one 6½" unfinished block. Press seams open. Make 36 blocks from a variety of Charm Pack HSTs.


1. Lay out blocks in six rows of six adding sashing and cornerstones as shown. Sew the horizontal rows first. Press seams toward the sashing. Pin and sew rows together. Pressing seams towards the sashing.

2. Add 3½" borders to quilt center. Sewing to right and left side first. Press seams towards borders. Then add top and bottom borders. Press toward borders.


Quilting and Finishing

1. Layer batting between quilt top and backing. 2. Pin or baste layers together. 3. Quilt as desired. 4. Add binding, mitering corners.

©2013 AccuQuilt Code PQ10290ito order call 888.258.7913 more patterns @ accuquilt.com

GO! Island Star Quilt

GO!® DIES USED• GO! Hexagon-41⁄2" Sides (41⁄4" Finished) (55438)

• GO! Equilateral Triangle-41⁄2" Sides (41⁄4" Finished) (55429)

• GO! Strip Cutter-21⁄2" (2" Finished) (55017 or 55014)

FABRIC REQUIREMENTS• Fabric 1 (Variety of Prints)—60, 10" x 10" squares

• Fabric 2—21⁄2 yards

• Binding—3⁄4 yard

• Batting—70" x 70"

• Backing—4 yards

CUTTING DIRECTIONSFabric 1:

• Cut 60—41⁄2" hexagons

Fabric 2:

• Cut 128—41⁄2" equilateral triangles

Binding Fabric:

• Cut 7—21⁄2" x width of fabric (WOF) strips

SEWING DIRECTIONS 1. Lay out two, Fabric #2 Triangles and one,

Fabric #1 Hexagon as shown. Sew together and press towards the Triangles.

2. Repeat previous step to make a total of 60 Units.

3. Lay out seven, pieced Hexagon Units as shown. Sew together and press seams in opposite directions.

4. Sew one extra, Equilateral Triangle to the lower left end of the row, and on to the upper right end of the row.

fi nished size 60" x 60"

Fabric provided by Hoffman Fabrics.

5. Make a total of four, Row #1.

6. Lay out eight, pieced Hexagon Units as shown. Sew together and press seams in opposite directions. Make a total of four, Row #2.

7. Lay out rows alternating between Row #1 and Row #2, offsetting Row #2 by half a block.

8. Sew rows together pressing seams in the same direction.

9. Trim quilt top sides even.

QUILTING AND FINISHING 1. Layer quilt top with batting and backing.

2. Pin or baste layers together.

3. Model was custom machine quilted.

4. Add binding, mitering the corners.

Row #1

Row #2

Row #1

Row #2

Row #1

Row #2

Row #1

Row #2


GO! Qube 8" Twirling Petals Quilt

Finished Size: 50" x 50" Fabrics are from the Sugar Pie Collection by Lella Boutique and are provided by Moda Fabrics

For use with GO! Qube™ Mix & Match 8" Block (55776) and GO! Qube™ 8" Companion Set-Corners (55785) OR GO! Qube™ 8" Companion Set–Classics (55780)


• GO! Square-4½" (4" Finished) (Shape 1)

• GO! Square-2½" (2" Finished) (Shape 2)

• GO! Quarter Square Triangle-4" Finished Square (Shape 4)

• GO! Half Square Triangle-2" Finished Square (Shape 5)

• GO! Rectangle-2½" x 4½" (2" x 4" Finished) (Shape 8)

GO! Qube 8" Companion Set-Corners (55785) OR GO! Qube 8" Companion-Classics (55780)

• GO! Chisels-2" x 4" Finished (Shape 9) Additional Dies Needed:

• GO! Strip Cutter-2" (1½" Finished) (55025)

• GO! Strip Cutter-2½" (2" Finished) (55017 or 55014)

• GO! Strip Cutter-4½" (4" Finished) (55054)


Fabric Requirements:

Fabric Color Total Yardage

White 2½ yards

Layer Cakes Layer Cakes or 10" precut squares

Green #1 1 yard

Green #2 1 yard

Batting 60" x 60"

Backing 3 yards

Cutting Directions:



White

Cut 5—5" x width of fabric (WOF) strips. Fanfold into 5½" widths. Sub cut into 64—rectangles.

2½ yards

White

5

Cut 5—3¾" x WOF strips. Fanfold into 3" widths. Sub cut into 128—2" finished half square triangles (HSTs).


Layer Cake

9

Choose 16 layer cakes and cut 2—5" x 10" rectangles on lengthwise grain from each layer cake. Layer up to 6 layers of fabric right side down on die and cut 32 chisels. Rotate fabric stack on die (keep fabric right side down) to cut 32 chisels from remaining 5" x 10" rectangles. Cut a total of 64 chisels.

Layer Cake – choose 16—10" squares for the petals of flowers

Layer Cake

5

Use the remaining 16—5" x 10" layer cake strip pieces from above to cut—2" finished HSTs from each of the 16 colors. Cut a total of 64—2" finished HSTs.


Layer Cake

Use a variety of 10" squares from layer cake and cut 16—2" finished squares for flower center.


88

2




Green #1 4

Cut 3—5½" x WOF strips. Fanfold into 5½" widths. Sub cut into 64—4" finished quarter square triangles (QSTs).

1 yard

Green #2

Cut 1—5" x 20" strip. Fanfold into 5" widths. Sub cut into 4—4" finished squares for border cornerstones.

1 yard


• White—Yardage included above o Use GO! Strip Cutter-4½" (4" Finished) (55054) to cut 4—4½" x WOF

strips for outer border.

• Green #2—Yardage included above o Use GO! Strip Cutter-2" (1½" Finished) (55025) to cut 4—2" x WOF strips

for inner border. o Use GO! Strip Cutter-2½" (2" Finished) (55017 or 55014) to cut 7—2½" x

WOF strips for binding. Additional Fabrics Needed:


• Backing: 3 yards cut into 2—54" pieces. Sew back together along the 54" length.

Sewing Directions: Press all seams open and use ¼” seams, unless otherwise indicated.

1. Sew one layer cake fabric and one white 2" finished half square triangle (HST) (Shape 5) on either side of the green #1 quarter square triangle (QST) (Shape 4) to form a flying geese unit as shown. Be sure the layer cake fabric is on the right short side of the QST. Press seams toward the HSTs. Make 64 flying geese units measuring 2½" x 4½".

1


2. Sew one white rectangle (Shape 8) to long green edge of flying geese unit from Step 1. Press seam toward rectangle. Unit will measure 4½" square. Make 64 square units.

3. Sew one white 2" finished HST (Shape 5) onto one layer cake fabric chisel (Shape 9) as shown. Press seams towards chisel. Make 64 chisel units measuring 2½" x 4½".

4. Lay out two units from Step 2 and one chisel as shown keeping flower petal colors together. Sew together pressing towards the chisel. Unit will measure 4½" x 10½". Make 2 of each colorway. Make 16 pairs.

5. Lay out two matching chisel units and one 2½" square as shown and sew together. Press seams toward chisel. Unit will measure 2½" x 10½". Make 16 pairs.

6. Lay out two matching units from Step 4 and Step 5 as shown. Sew together. Press seams open. Block will measure 10½" x 10½". Make 16 blocks.



1. Lay out blocks in 4 rows of 4 blocks as shown. Sew the horizontal rows together first. Press rows 1 and 3 to the right and rows 2 and 4 to the left. The rows will then nest perfectly when sewn together.

2. Measure quilt top and add the green #2 inner border to right and left side first. Measure again and add green #2 inner border to top and bottom. Press to inner border.

3. Measure the quilt center in 3 places and

then take the average measurement and cut 4 strips that length from the 4½" outer border pieces. Sew two of them to opposite sides of the quilt top. Press to the outer border.

4. Sew the green #2 fabric 4" finished

HSTs (Shape 1) to each end of the remaining two white 4½" border strips from Step 3. Press to white border. Sew to remaining opposite sides of quilt top. Press to the outer border.


Quilting and Finishing

1. Layer batting between quilt top and backing. 2. Pin or baste layers together.

3. Quilt as desired. 4. Add

binding, mitering corners.

go! garden variety spider web quilt...2020/02/17 · floral print b (the sample quilt uses flower...

Documents