grundfos and wind turbines
TRANSCRIPT
-
8/15/2019 Grundfos and Wind Turbines
1/32
GRUNDFOS INDUSTRYPumps in the windpower industry
Grundfos and Wind Turbines
vindmøllebrochure.indd 1 9/4/2012 12:31:43 PM
-
8/15/2019 Grundfos and Wind Turbines
2/32
2
GRUNDFOS– This is who we are
Grundfos
In short terms
CR
Introduction
Performance curve and technical data
MAGdrive
Shaft seals
Other optionsCM
Introduction
Performance curve and technical data
TP
Intro and performance curve
MAGNA3 & Grundfos GO
Introduction and performance curve
Motor
Build for pumps
E-solutionsTo ensure energy saving
Related areas
Offshore
SP Systems
For water supply
The Future
We are ready
4
6
8
10
12
14
16
18
20
22
24
26
28
30
31
vindmøllebrochure.indd 2 9/4/2012 12:31:45 PM
-
8/15/2019 Grundfos and Wind Turbines
3/32
3
CME pumps
E-solutions
MAGNA3 pump
CR pump
TP pump
vindmøllebrochure.indd 3 9/4/2012 12:31:54 PM
-
8/15/2019 Grundfos and Wind Turbines
4/32
-
8/15/2019 Grundfos and Wind Turbines
5/32
5
“GRUNDFOS HAS DELIVERED EQUIPMENT TO THE WIND TURBINE BUSINESS SINCE 1998.TODAY WE ARE KNOWN AS A STRONG AND COMPETENT PARTNER.
“GRUNDFOS DEVELOPS
SUSTAINABLE SOLU
TIONS TO SOME OF THE
MAJOR CHALLENGES
THAT THE WORLD IS
FACING.”
GRUNDFOS WANTS TO BE AN
ENVIRONMENTALLY SUSTAIN
ABLE COMPANY, WE NOT ONLY
FOCUS ON THE IMPACT OF
OUR OWN ACTIVITIES AND THE
ENVIRONMENT WE DEVELOP,
MANUFACTURE AND SELL SOLUTIONS THAT CAN HELP OUR
CUSTOMERS REDUCE THE IMPACT
OF THEIR ACTIVITIES ON THE
ENVIRONMENT.
1998 2000
UPS
2002
CR CRN MAGdrive
2006 2008
CHI TP
GRUNDFOS IN THE WIND
vindmøllebrochure.indd 5 9/4/2012 12:32:17 PM
-
8/15/2019 Grundfos and Wind Turbines
6/32
-
8/15/2019 Grundfos and Wind Turbines
7/32
7
Solution Description Photo Our match
All stainlesssteel
For applications exposed to corrosiveatmosphere, e.g. maritime applications orwhere frequent wash-down occurs, a stainlesssteel base plate and motor stool are available.
All parts exposed to the corrosive installationenvironment are thus made of stainless steel.
The CR pump comes asstandard in cast iron but canbe made in complete stainlesssteel EN 1.4301 or EN 1.4401.Relevant if high corrosionresistance is required.
Horizontalmounting
Certain situations require the pumps to bemounted horizontally.
The CR pumps can be designed to fitinstallations with limited height, vehicles,ships or earthquake-prone areas.End-suction base can be supplied as option.
Depending on space andinstallation requirementsthe CR pump can be installedeither horizontally or vertically.Horizontal installationfurthermore has a positiveeffect on the bearing life.
Refrigerantpump
For applications handling temperatures downto -40°C, special coolant pumps are available.
Because of different thermal coefficients ofexpansion, special designs are required.
Can be required when theturbine needs to start at minus40 degree C under start up anduntil operation temperature isreached.
Rubbermaterials
Pumps fitted with chemical-resistant FXM(Fluoraz®) or FFKM (Kalrez®) rubber O-rings areavailable for applications, where the liquid maydamage standard O-ring materials, e.g. EPDM,FKM and Viton®.
Special types of rubber materi-als are available dependingon the type of cooling liquidspecified.
Pumpbearings
A wide variety of bearing materials are avail-able to suit any app lication, e.g. silicon carbide,bronze, tungsten carbide, and carbon-filledPTFE.
Special types of bearing mate-rials are available dependingon the type of cooling liquidspecified.
Belt-drive
For applications in remote areas or mobileapplications, where electric power is not avail-able, belt-driven pumps powered bye.g. a diesel engine or a steam turbine can besupplied.
Could be used if you want thepump driven by something elsethan a standard motor.
ConnectionsA wide range of pipe connections can be sup-plied to the CR p ump depending on applicationor customer request.
Depending on whether youdemand a compact build-inlength on your pump or anotherspecial solution in terms ofconnection, you can get it forthe CR.
vindmøllebrochure.indd 7 9/4/2012 12:32:24 PM
-
8/15/2019 Grundfos and Wind Turbines
8/32
8
CR PUMPSPerformance curve and technical data
10. 8 11 1. 5 2 3 4 5 6 8 1010 15 20 30 40 50 60 80 100100 150 2 00
Q[ m³ /h]
20
30
40
60
80
100
200
300
400
H
[m ]6 0 Hz
CR150
CR120
CR 1s CR 10
CR15
CR20
CR 1 CR64
CR45
CR32CR 5
CR 3
CRI1
CR N1
CR I3
CR N3
CRI5
CRN5
CRN32 CRN64
CRN90CRN45CR I1 0
CRN10
CRI1 5
CRN15
CRI20
CRN20
CR I1 s
CR N1 s
CRN 120
CRN150
10. 8 11 1. 5 2 3 4 5 6 8 1010 15 20 30 40 50 60 80 100100 150 2 00Q[ m³ /h]
20
30
40
60
80
100
200
300
400
H
[m ]50 Hz
CR150
CR120
CR 1
CR 3
CR 5
CRI1
CRN1
CRI3
CRN3
CRI5
CRN5
CRN32
CRN64
CRN90CRN45
CR32
CR45
CR64
CR90
CR10
CRI10
CRN10CR15
CRI15
CRN15
CR20
CRI20
CRN20
CR1s
CRI1 s
CRN1 s
CRN120CRN150
vindmøllebrochure.indd 8 9/4/2012 12:32:30 PM
-
8/15/2019 Grundfos and Wind Turbines
9/32
9
CR 1s CR 1 CR 3 CR 5 CR 10 CR 15 CR 20 CR 32 CR 45 CR 64 CR 90 CR 120 CR 150
Range:
Temperature range (°C) -20 to +120 -30 to +120
On request (°C) - 40 to +180 -40 to +180
Max. pump efficiency (%) 35 48 58 66 70 72 73 78 79 80 81 75 72
Flow range (m³/h) 0.3-1.1 0.7-2.4 1.2-4.5 2.5-8.5 5-13 9-24 11-29 15-40 22-58 30-85 45-120 60-160 75-180
Version:
CR (AISI 304/Cast Iron) x x x x x x x x x x x x x
CRI (AISI 304) x x x x x x x
CRN (AISI 316) x x x x x x x x x x x x x
CRT (Titanium) x* x* x* x*
CR pipe connection:
Oval flange (BSP) Rp 1 Rp 1 Rp 1 Rp 1¼ Rp 1½ Rp 2 Rp 2½
On request (BSP) Rp 1¼ Rp 1¼ Rp 1¼ Rp 1Rp 1¼Rp 2
Rp 2½ Rp 2
Flange DN 25/
DN 32DN 25/DN 32
DN 25/DN 32
DN 25/DN 32
DN 40 DN 50 DN 50 DN 65 DN 80 DN 100 DN 100 DN 125 DN 125
On request DN 50 DN 65 DN 65 DN 80 DN 100 DN 125 DN 125 DN 150 DN 150
CRI pipe connection:
Oval flange (BSP) Rp 1 Rp 1 Rp 1¼ Rp 1¼ Rp 1½ Rp 2 Rp 2
On request (BSP) Rp 1¼ Rp 1¼ Rp 1 Rp 1 Rp 2
Flange DN 25/
DN 32DN 25/DN 32
DN 25/DN 32
DN 25/DN 32
DN 40 DN 50 DN 50
On request DN 50 DN 65 DN 65
PJE coupling (Victaulic)Rp 1¼ Rp 1¼ Rp 1¼ Rp 1¼ Rp 2 Rp 2 Rp 2
DN 32 DN 32 DN 32 DN 32 DN 50 DN 50 DN 50
Clamp coupling (L-coupling) Ø48.3 Ø48.3 Ø48.3 Ø48.3 Ø60.3 Ø60.3 Ø60.3
Union (+GF+) Rp 2 Rp 2 Rp 2 Rp 2 Rp 2¾ Rp 2¾ Rp 2¾
CRN pipe connections:
Flange DN 25/
DN 32DN 25/DN 32
DN 25/DN 32
DN 25/DN 32
DN 40 DN 50 DN 50 DN 65 DN 80 DN 100 DN 100 DN 125 DN 125
On request DN 50 DN 65 DN 65 DN 80 DN 100 DN 125 DN 125 DN 150 DN 150
PJE coupling (Victaulic)Rp 1¼ Rp 1¼ Rp 1¼ Rp 1¼ Rp 2 Rp 2 Rp 2
Rp 3 Rp 4 Rp 4 Rp 5 Rp 5 Rp 5DN 32 DN 32 DN 32 DN 32 DN 50 DN 50 DN 50
Clamp coupling x x x x x x x
Union (+GF+) x x x x x x x
CRT pipe connections:
PJE coupling (Victaulic) x* x* x* x* x*
Flange (on request) x* x* x* x* x*
*CRT 2,4,8 and 16.
vindmøllebrochure.indd 9 9/4/2012 12:32:32 PM
-
8/15/2019 Grundfos and Wind Turbines
10/32
10
NEED TO PUMP DANGEROUS, AGGRESSIVE, VOLATILE OR PRECIOUS LIQUID?THEN WHAT YOU REALLYWANT IS A COMPLETELYLEAKFREE PUMP.
CR PUMPSMAGdrive
LEAKFREE PUMPS FOR HAZARDOUS LIQUIDGrundfos designed the CRN MAGdrive to be exactly that. Its pump shaft is rotated from the outside
by the forces of magnetism, so the liquid cannot escape its closed circuit. Everything stays put –
which is good news for your processes, your working environment and the environment in general.
RATED POWER UP TO 22 KWThe advantages of the hermetically sealed magnetic drive are available on CRN pumps with a rated
power up to 22 kW. No matter how powerful a motor you need, you get a pump which combines
high speed and compactness – and the benefits of patented technologies you won’t find anywhere
else. Naturally, the MAGdrive series has the superior reliability and performance you expect from a
CR solution.
CUSTOMISE AS YOU PLEASEA magnetic coupling is one way to customise your CR pump for demanding industrial applications.
There are many more. The CR range is famed for giving you the greatest possible choice: take your
pick from a wide range of motor types, materials, couplings, surface treatments and much more.
There are over one million possible combinations. So there is sure to be one to suit you.
Facts about this product
Flow range: Up to 120 m3/h
Max. ambient temp.: 40°C
Max. liquid temp.: 120°C
Max. pressure: 25 barViscosity range: 0.3 – 300 mPas
vindmøllebrochure.indd 10 9/4/2012 12:32:41 PM
-
8/15/2019 Grundfos and Wind Turbines
11/32
11
HOW IT WORKSA magnetic coupling uses the force of magnetism to transmit power from the drive to the shaft. As
the illustration shows, the magnets are located inside completely separate parts – only the force of
magnetism connects the two. When the drive moves the magnets marked “A”, it makes the magnets
marked “B” turn as well, causing the shaft in the liquid to rotate and create the required pumping
action. In contrast to traditional pumps, the shaft does not penetrate through the two parts. This
means that there are no holes or seals through which the liquid can escape. The result is hermetically
sealed, safe pumping.
“A” - Outer magnets “B” - Inner magnets
Motor shaft
Bearing system Pump head
Pump shaft
vindmøllebrochure.indd 11 9/4/2012 12:32:44 PM
-
8/15/2019 Grundfos and Wind Turbines
12/32
12
IN ITS MOST BASIC FORM,A SHAFT SEAL COMBINESA ROTATING PART WITH ASTATIONARY PART.
CR PUMPSShaft seals
Extreme liquids call for extreme measures. Most pumps are used for watery liquids at temperatures
below 120°C and pressures lower than 30 bar. When liquids go beyond these limits, special shaft
seal solutions are required to guarantee reliable operation.
• Aggressive or corrosive liquids
• Abrasive liquids
• Poisonous and/or explosive liquids
• High-viscosity and/or sticky liquids
• Extraordinary high pressure
• Extraordinary high or low temperature
vindmøllebrochure.indd 12 9/4/2012 12:32:51 PM
-
8/15/2019 Grundfos and Wind Turbines
13/32
13
Solution Description Photo
MAGdrive(sealless)
MAGdrive (sealless) solution is the preferred solution if you want a her-metic closed pump or go for a completely maintenance free solution inmany years.
MAGdrive pumps are completely leak-free. They use the power of strongmagnets to turn the pump shaft from the outside, so there are no sealsor openings for the liquid to escape through. The result is safe, hermeti-
cally closed pumping.
Titaniumshaft seal
For applications involving a high risk of corrosion, an all-titanium shaftseal variant is available for the all-titanium CRT pumps.
LiqTec™dry-runningprotection
The Grundfos LiqTec™ is an electronic anti-dry-running sensor that stops
the pump immediately if it senses no liquid.The LiqTec™ can also monitor the flow and temperature of the pumpedliquid and can operate as a PTC relay for the motor monitoring motoroverload.
Shaft sealvariants
Grundfos offers a wide range of balanced cartridge shaft seals with dif-ferent seal faces, such as silicon carbide, carbon and tungsten carbide tohandle almost any industrial liquid.
Rubbermaterials
Seals fitted with chemical-resistant FXM (Fluoraz®) or FFKM (Kalrez®) rub-ber O-rings are available for applications where the liquid may damagestandard O-ring materials, such as EPDM, FKM and Viton®.
vindmøllebrochure.indd 13 9/4/2012 12:32:58 PM
-
8/15/2019 Grundfos and Wind Turbines
14/32
14
In addition to the range of variants relating to the motor, shaft seal, or pump module of the CR
products presented on the previous pages, Grundfos offers a variety of other customised solu-
tions to suit almost any conceivable need or requirement that you may have. For instance a variety
of connection options are available, as are pump models for additional corrosion requirements,
hygienic demands or pumps in special colours.
CUSTOMISED PUMPSIt is more than likely that we will be able to create exactly the right pump for you by combining the
elements and options already available within the CR range. But if you have special requirements or
a specific design in mind, let us know. We will do our best to provide full satisfaction.
GREAT TOOLS ARE JUST A MOUSECLICK AWAY!Grundfos oers the market’s most comprehensive, 24-hour, online access to everything you need tomaintain or service your system: from CAD drawings to installation videos and operating instruc-
tions. Go to www.grundfos.com, choose the WebCAPS symbol, and you are there: detailed technical
information, drawings, wiring diagrams, dimensioning – everything!
CR PUMPSOther options
vindmøllebrochure.indd 14 9/4/2012 12:33:01 PM
-
8/15/2019 Grundfos and Wind Turbines
15/32
15
Solution Description Photo Our match
Additionalcorrosionresistance
For applications with a need for improvedcorrosion resistance, electropolished stainlesssteel or all-titanium pumps are available.
If a special corrosion class isrequired, then C3, C4 or C5 canbe supplied on request.
Cleaned anddried pumpcomponents
For applications with very strict requirementsof cleanliness. All pump parts have beencleaned in hot soapy water, rinsed in de-ionisedwater and packed in silicon-free plastic bags.
All Grundfos pumps are testedwith water. Some test waterwill therefore remain in thepumps. If that is not acceptablethen this could be the solution.
Specialcolours
Pumps are available in a multitude of coloursto match any requirement.
If you have a special colourpreference, e.g. your standardcorporate colour, it can bemade to order. It could also be aspecial paint type or thicknessto give you the corrosion class you need.
Certificates
A wide range of pump and material certifi-cates are available, e.g. inspection certificates(Lloyd’s (LRS), Veritas (DNV), American (ABS),etc.), material specication, duty-point verica-tion, surface roughness, vibration test, motortest, ATEX and much more.
Depending on the tests and
classifications required at theplace of installation a widerange of certificates can besupplied.
Multipackaging
Pumps can be delivered on pallets without anyadditional packaging (cardboard).
If needed the pumps can besupplied in special packaging.
vindmøllebrochure.indd 15 9/4/2012 12:33:08 PM
-
8/15/2019 Grundfos and Wind Turbines
16/32
16
A SMALL PUMP WITHGIGANTIC POTENTIALCM PUMPS
Introduction
It was once said that great things come in small packages. When you meet the Grundfos CM pump
for the first time, you will certainly agree. This horizontal multistage pump has been created with
compactness and modularity as two of its central features. Add reliability and quiet operation tothe mix, and another innovative pump solution from Grundfos is born.
The Grundfos CM is designed to be used in a variety of applications. These include:
• Temperature control
• Washing & cleaning
• Water treatment
• Chemical and pharmaceutical industries Facts about this product
Flow rate: max. 36 m3/h
Head: max. 130 m
Liquid temp.: -30°C to +120°C
Operat. pressure: max. 16 bar.
vindmøllebrochure.indd 16 9/4/2012 12:33:13 PM
-
8/15/2019 Grundfos and Wind Turbines
17/32
17
Solution Description Photo Our match
All stainlesssteel
For applications exposed to corrosiveatmospheres, e.g. maritime applications orwhere frequent wash-down occurs, a stainlesssteel base plate and motor stool are available.
All parts exposed to the corrosive installationenvironment are thus made of stainless steel.
The CM pump comes asstandard in cast iron (Type A),but can be made in completestainless steel EN 1.4301 (Type I)or EN 1.4401 (Type G). Relevantif a high corrosion resistance isrequired.
CompactnessFor OEM builders or where compactness is aneed the CM pump is one of the most compactpumps on the market.
Compactness can be a big issuein turbines were space alwaysis a limitation.
Verticalmounting Certain situations require the pumps to bemounted vertically.
Depending on space andinstallation demands the CMpump can be installed eitherhorizontally or vertically.
Temperaturespan
Thanks to the numerous configuration pos-sibilities and range of materials, the Grundfos
CM pump can operate over a wide range oftemperatures: from -30°C to 120°C. If yourequire different pumps for different applica-tions, this flexibility and streamlining helpskeep maintenance and spare parts costs to aminimum.
May be required when theturbine has to start from coldand the glycol water is down to-30°C during start up.
Rubbermaterials
Pumps fitted with chemical-resistant FXM(Fluoraz®) or FFKM (Kalrez®) rubber O-rings areavailable for applications, where the liquid maydamage standard O-ring materials, such asEPDM, FKM and Viton®.
Special types of rubber materi-als are available dependingon the type of cooling liquidspecified.
Pump
bearings
A wide variety of bearing materials are avail-able to suit any app lication, e.g. silicom
carbide, bronze, tungsten carbide and carbon-filled PTFE.
Special types of bearing mate-rials are available depending
on the type of cooling liquidspecified.
Non-Stickshaft seal
What is more, industry-wide problems withsticking of shaft seals where SIC-SIC seal facesare used have been eliminated. The new CMsolution builds on both the implementation ofa rotation stop on the stationary ring and thepresence of different surface finishes on thestationary and the rotating rings.
Expected lifetime improved bythis solution
vindmøllebrochure.indd 17 9/4/2012 12:33:19 PM
-
8/15/2019 Grundfos and Wind Turbines
18/32
18
CM PUMPSPerformance curve and technical data
0 2 4 6 8 10 12 14 16 18 20 22 2 4 26 28 Q[m³/h]
0
10
20
30
40
50
6070
80
90
100
110
120
130
140
H[m ]
0 1 2 3 4 5 6 7 8 Q[l/s]
0
200
400
600
800
1000
1200
p[kPa]
CM25CM15CM10CM5CM3CM1
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 3 4 Q[ m³/h]
0
10
20
30
40
5060
70
80
90
100
110
120
130
H[m]
0 1 2 3 4 5 6 7 8 9 Q[ l/s]
0
200
400
600
800
1000
1200
p[kPa]
CM1 CM10 CM15 CM25CM3 CM5
CME1 CME3CME5 CME10 CME15 CME25
CM 50 Hz
CM 60 Hz - CME 50/60 Hz
Please see the above curves showing the CM range. We also offer CME, which you
can find more information about on the facing page
vindmøllebrochure.indd 18 9/4/2012 12:33:22 PM
-
8/15/2019 Grundfos and Wind Turbines
19/32
19
• •
Pumptypes
50 Hz 60 Hz 50 Hz 60 Hz 50/60 HzElectronically speed-controlled
motorMaterial Material Shaft seal Voltage Voltage Voltage Voltage
C M-A ( c a s t i r on )
C M-I ( A I S I 3 0 4 / DI N1 .4 3 0 1 )
C M- G ( A I S I 3 1 6 / DI N1 .4 4 0 1 )
C M-A ( c a s t i r on )
C M-I ( A I S I 3 0 4 / DI N1 .4 3 0 1 )
C M- G ( A I S I 3 1 6 / DI N1 .4 4 0 1 )
A V B E
A V B V
A Q QE
A Q QV
A Q QK
1 x2 2 0 -2 4 0 V
3 x2 2 0 -2 4 0 / 3 8 0 -4 1 5 V
1 x2 2 0 V
1 x1 1 5 / 2 3 0 V
1 x1 2 7 V Onr e q u e s t
3 x2 0 8 -2 3 0 / 4 4 0 -4 8 0 V
3 x 5 7 5 V
3 x2 2 0 -2 4 0 / 3 8 0 -4 1 5 V , 5 0
Hz
3 x2 2 0 -2 5 5 / 3 8 0 -4 4 0 V , 6 0
Hz
3 x 3 8 0 -4 1 5 V , 5 0 Hz
3 x4 4 0 -4 8 0 V , 6 0 Hz
3 x2 0 0 / 3 4 6 V , 5 0 Hz
3 x2 0 0 -2 2 0 / 3 4 6 - 3 8 0 V , 6 0 Hz
3 x4 0 0 V , 5 0 Hz / 4 0 0 V , 6 0 Hz
3 x 3 8 0 -4 8 0 V , 5 0 / 6 0 H
z
1 x2 0 0 -2 4 0 V , 5 0 / 6 0 Hz
3 x4 6 0 -4 8 0 V , 6 0 Hz ( U S
A )
1 x2 0 8 -2 3 0 V , 6 0 Hz ( U S
A )
CM 1-2 • • • • • • • • • • • • • • • • • • • • • • • •
CM 1-3 • • • • • • • • • • • • • • • • • • • • • • • •
CM 1-4 • • • • • • • • • • • • • • • • • • • • • • • •
CM 1-5 • • • • • • • • • • • • • • • • • • • • • • • •
CM 1-6 • • • • • • • • • • • • • • • • • • • • • • •
CM 1-7 • • • • • • • • • • • • • • • • • • • • • • •
CM 1-8 • • • • • • • • • • • • • • • • • • • • • • •
CM 1-9 • • • • • • • • • • • • • • • • • • • • • •
CM 1-10 • • • • • • • • •
CM 1-11 • • • • • • •
CM 1-12 • • • • • • •
CM 1-13 • • • • • • •
CM 1-14 • • • • • • •
CM 3-2 • • • • • • • • • • • • • • • • • • • • • • • •
CM 3-3 • • • • • • • • • • • • • • • • • • • • • • • •
CM 3-4 • • • • • • • • • • • • • • • • • • • • • • • •
CM 3-5 • • • • • • • • • • • • • • • • • • • • • • • •
CM 3-6 • • • • • • • • • • • • • • • • • • • • • • •
CM 3-7 • • • • • • • • • • • • • • • • • • • • • •
CM 3-8 • • • • • • • • • • • • • • • • • • • • • •
CM 3-9 • • • • • • • • • • • • • • • • • •
CM 3-10 • • • • • • • • •
CM 3-11 • • • • • • •
CM 3-12 • • • • • • •
CM 3-13 • • • • • • •
CM 3-14 • • • • • • •
CM 5-2 • • • • • • • • • • • • • • • • • • • • • • • •
CM 5-3 • • • • • • • • • • • • • • • • • • • • • • • •
CM 5-4 • • • • • • • • • • • • • • • • • • • • • • •
CM 5-5 • • • • • • • • • • • • • • • • • • • • •
CM 5-6 • • • • • • • • • • • • • • • • • • •
CM 5-7 • • • • • • • • • • • • • • • • • • •
CM 5-8 • • • • • • • • • • • • • • • • • •
CM 5-9 • • • • • • • • •
CM 5-10 • • • • • • • • •
CM 5-11 • • • • • • •
CM 5-12 • • • • • •
CM 5-13 • • • • • •CM 10-1 • • • • • • • • • • • • • • • • • • • • • • • •
CM 10-2 • • • • • • • • • • • • • • • • • • • •
CM 10-3 • • • • • • • • • • • • • • • • • • • •
CM 10-4 • • • • • • • • • • • • • • • • • •
CM 10-5 • • • • • • • • • • • • • • • • • •
CM 10-6 • • • • • • • •
CM 10-7 • • • • • •
CM 10-8 • • • • • •
CM 15-1 • • • • • • • • • • • • • • • • • • • •
CM 15-2 • • • • • • • • • • • • • • • • • • • •
CM 15-3 • • • • • • • • • • • • • • • • • • •
CM 15-4 • • • • • • • • •
CM 25-1 • • • • • • • • • • • • • • • • • • •
CM 25-2 • • • • • • • • • • • • • • • • • • •
CM 25-3 • • • • • • • • •
CM 25-4 • • • • • • • • •
Only liquid temp. below 90°C Not suitable for 60 Hz xed-speed pumps nor CME pumps at 100% speed
vindmøllebrochure.indd 19 9/4/2012 12:33:26 PM
-
8/15/2019 Grundfos and Wind Turbines
20/32
20
TPIntroduction and performance curve
GRUNDFOS TP/TPE IS THEWORLD’S MOST COMPREHENSIVE RANGE OF HIGHEFFICIENCY INLINE PUMPSDESIGNED FOR USE IN AVARIETY OF APPLICATIONS.
Grundfos TP/TPE is the world’s most comprehensive range of high efficiency in-line pumps with
Grundfos Blueux® IE3 motors. The TP/TPE pumps feature the world-renowned IE3 motor as stand-
ard, along with integrated frequency converters that ensure maximum efficiency at all times. This
guarantees the lowest possible life cycle costs and the best conditions for the environment.
Grundfos application areas:
• Heating
• District heating
• Air-conditioning
• District cooling
• Industrial cooling
• Industrial processes
• Water supply
Facts about this product
Flow rate: max. 4600 m3/h
Head: max. 170 m
Liquid temp.: -25°C to +150°C
Operat. pressure: max. 25 bar.
vindmøllebrochure.indd 20 9/4/2012 12:33:31 PM
-
8/15/2019 Grundfos and Wind Turbines
21/32
21
Solution Description Photo
Optimisedflow geometry
With our unique high-precision machinery, we have minimised the tolerancesused in the manufacture of the impeller and pump casing and optimised the flowgeometries of these two crucial components. The result: minimal backflow andincreased energy efficiency.
Anti-corrosionsurface
Cataphoresis surface treatment consisting of Powercron® cathodic electrocoatingand zinc phosphate coating. – Maximal protection against corrosion– Cataphoresis on the inside of the pump means a longer lasting inside surface
that keeps efficiency high.
Surfacedetails
Sometimes, looking at the surface is a good thing. Grundfos TP/TPE pumps aregiven cataphoresis surface treatments, consisting of Powercron® cathodic elec -trocoating and zinc phosphate coating. Cataphoresis on the inside of the pumpmeans a longer lasting inside surface that keeps efficiency high.
Compactperfection
The ratio between the length and width of the shaft in the pump is extremelyimportant. Large shaft diameters (D) and a short distance from impeller to motor(L) maximize stability, ensuring lower maintenance costs. Grundfos pumps alwaysstrive for the optimal proportion between the length and width of the shaft (L3/D4).- Maximal shaft seal lifetime- Especially well suited for frequency converter operation
5
10 20 40 100 200 400 1000 2000 4000
10
15
20
30
40
40
80
100
150
200
H[m]
Q [m3 /h]
TPTPE
TP, TPE
50 Hz
1 4 10 40 100 400 2000
H[m]
Q [m3 /h]
TPTPE
10
15
20
30
40
40
80
100
150
200
TP, TPE
60 Hz
The curves show the performance range of Grundfos in-line pumps.
Curves show the performance range of pumps with integrated frequency converters (TPE pumps).
PERFORMANCE RANGE FOR TP/TPE
vindmøllebrochure.indd 21 9/4/2012 12:33:38 PM
-
8/15/2019 Grundfos and Wind Turbines
22/32
22
MAGNA & GRUNDFOS GOIntroduction
FULL RANGE OF INTELLIGENT, HIGHEFFICIENCYCIRCULATORS FOR HEATING, COOLING, GROUNDSOURCE HEAT PUMP SYSTEMS AND DOMESTIC HOTWATER APPLICATIONS.
MORE THAN A PUMPIf you are looking for the best efficiency on the market combined with high intelligence and wide
range, look no further. The MAGNA3 is here.
RELIABLE INNOVATIONThe MAGNA3 is a circulator pump based on the tried and tested MAGNA technology and our indus-
try-leading experience with electronic pumps. The permanent magnet motor, AUTO ADAPT function
and integrated frequency converter are still part of the MAGNA package, but we have added some
additional, ground-breaking new technologies. The result is a cutting-edge piece of intelligent tech-
nology that retains the unrivalled Grundfos reliability.
THE ALLPURPOSE CIRCULATORLike its predecessor, MAGNA3 is the ideal pump for heating and cooling applications as well as domes-
tic hot water circulation systems. It is designed to handle liquids down to -10°C, which makes it suit-
able for both tough industrial tasks and ground source heat pump systems (GSHP). Furthermore, the
liquid temperature (-10°C to +110°C) is now independent of the ambient temperature (0°C to +40°C).So whether your project requires heating or cooling – MAGNA3 is the pump for you.
GRUNDFOS GOThe intuitive handheld pump control, Grundfos GO, offers full remote access to Grundfos’ online
tools. With the most comprehensive mobile platform on the market Grundfos GO is designed to save
valuable time on pump control, reporting and data collection.
Facts about this product
Flow rate: max. 70 m3/h
Head: max. 18 m
Liquid temp.: -10°C to +110°C
Operat. pressure: max. 16 bar.
ENERGY CONSUMPTION
Index
10
0
20
30
40
50
80
60
90
70
100
Typicalinstalledcirculator
EuP2013
EuP2015
MAGNA3
vindmøllebrochure.indd 22 9/4/2012 12:34:24 PM
-
8/15/2019 Grundfos and Wind Turbines
23/32
23
p[kPa]
40-180
50-40
65-40 80-40
100-40
100-8080-8065-80
50-80
65-12050-120
40-120
7
1
1
5
4
4
3
6
2
8
8
10
6
15
5
20
9
30
10 12 14
6040 50
H[m]
1.5
8
2
3
10
4
15
5
12
6
18
20
20
40
60
80
100
120
150
180
40-180
50-180
50-150
32-120
40-100
40-80
65-150
50-10065-100
65-60
80-60
100-60
100-100
100-120
80-100
80-120
50-60
40-150
Q[l/s]
Q[m3/h]
MAGNA3 PERFORMANCE RANGE
vindmøllebrochure.indd 23 9/4/2012 12:35:12 PM
-
8/15/2019 Grundfos and Wind Turbines
24/32
24
MOTORBuilt for pumps
ADVANCED MOTOR TECHNOLOGY THAT REDUCESENERGY WASTE IN PUMPAPPLICATIONS
Grundfos Blueflux® technology represents the best from Grundfos within energy-efficient motors
and variable frequency drives. Products with Grundfos Blueflux® label either meet or exceed inter-
national legislation regarding motor efficiency. Grundfos Blueflux® labelled motors are standard in
CR pumps with motor size 0.75-75 kW and motors with integrated frequency converter from 0.75-22
kW. What follows is an overview of some of the most common motor variants offered by Grundfos.
However, the overview covers only a fragment of the total motor range. Please do not hesitate tocontact Grundfos if your requirements are not covered by the overview.
• Special supply voltages
• Extreme operating conditions
• Special motor protection
• Specic approval
• Special motor design
• Long bearing life
vindmøllebrochure.indd 24 9/4/2012 12:35:15 PM
-
8/15/2019 Grundfos and Wind Turbines
25/32
25
Solution Description Photo Our match
BearingsDifferent ball bearing types and greasetypes is available depending on the ambi-ents and demand for life time.
Special ball bearing types, includinghybrid bearings, are available if youhave problems with bearing currentor request a long-life b earing.
Heating units Anti-condensation heating can be suppliedby a built-in heating unit.
Built-in heating element is standardin Grundfos motors with frequencyconverter.
Multi-plugOur motors are available with a multi-plug(Harting® plug) according to HAN 10 ES forfast mains connection.
Special connections are available ifa fast and easy electrical installa-tion is required.
Thermalprotection
Motors with a built-in bimetallic thermalprotector (PTO) or a temperature dependingresistor (PTC) are available.
If you want more protection thanwhat is normally required, thermalprotection can be supplied.
cURusapproval
Grundfos motors are available with thecURus approval covering USA and Canada.
Dual frequency: 50 Hz: 3 x 208-230/460 V60 Hz: 3 x 400 V.
We have the approvals you need nomatter where you install the pump.
VIK approvedmotors
VIK approved motors are av ailable accordingto the German industrial electrical s tandard.
We have the approvals you need nomatter where you install the pump.
Over- orundersizemotors
For use where the viscosity or density isdifferent from that of water, installationswhere the altitude exceeds 1000m or wherethe ambient temperature is very high.
If you have very high concentra-tions of glycol in the liquid you arepumping or the turbine is installedin high-altitude or warm areas, anoversized motor compared to thestandard one could be necessary.
Terminal boxposition
The motor can be mounted on the pumphead in steps of 90˚C.
The motor can be rotated for easieraccess.
Specialvoltage
A wide range of supply voltages within singlethree-phase as well as dual voltage can besupplied.
Depending on the supply voltage inthe turbine we can supply the mostcommon ones.
vindmøllebrochure.indd 25 9/4/2012 12:35:40 PM
-
8/15/2019 Grundfos and Wind Turbines
26/32
-
8/15/2019 Grundfos and Wind Turbines
27/32
27
Solution Description Our match
Differentspeeds
The Grundfos E-solutions can operate at different speeds inorder to optimise pump performance to the application:Low speed, to obtain e.g.- gentle handling of the liquid- pumping at low NPSH level- reduced noise emission
If you want to be in complete control of your coolingsystem, a frequency converter in front of the pump will bea huge advantage.
Over-synchronousspeed
Oversynchronous speed, to obtain e.g.- more flow and head on a given pump size- compact physical size
If you need the smallest pump you can get, than it could be
an idea to speed it up to size down. Furthermore you coulduse the function if in periods you need more flow an headthan normal.
The advancedcontrol canmeasureand adaptto specialapplications
- Extended protection of process- extended protection of pump and drive- pump performance curve adjusted to match individual
applications
Why have a bigger flow t han needed?With this solution you can save costs simply by leaving outthe regulation valves.
Standstillheating
An anti-condensation heater function makes it possible toheat up the motor during standstill to avoid condensationin the motor.
If for some reason you need motor heating of a turbine,then motor heating is installed in the E-solution as astandard.
Duty/standbyBy interconnecting two pumps via the standard built-inGENIbus interface, a duty/standby function of the twopumps can be obtained.
E-solution from Grundfos, you do not need to programmeanything in your controller as it has already been done byGrundfos.
Duty/assistBy interconnecting two pumps via the standard built-inGENIbus interface, a duty/assist function of the two pumpscan be obtained.
Useful if you do not want to have two 100% pumps as inthe duty/standby solution, but maybe two 80% pumps.The duty/assist function could be a real benefit to you if
your turbine has a load profile that does not require 100%cooling capacity 24/7. Everything is set up by Grundfos.
Constant –whatever youwant!
When we say constant, we mean constant! E-pumps havea built-in PI controller that provides closed-loop control ofvirtually any value you want to control (available functionsdepend on E-pump type and variant). For example: Constant
differential pressure. Constant temperature.
We have a built-in regulator so no matter if you want toregulate by pressure, differential pressure, temperature orsomething else we can handle it.
Unique userinterface
The user interface is self-explanatory and very easy to use.
Very useful if fast commissioning is needed, or you maybeneed to change something and you do not have a program-ming background. This can be done easily because t he E-solution is developed f or pumps and nothing else meaningit can be made simpler.
vindmøllebrochure.indd 27 9/4/2012 12:35:44 PM
-
8/15/2019 Grundfos and Wind Turbines
28/32
28
RELATED AREAS
Offshore
NOISE REDUCTIO IN OFFSHORE INSTALLATIONS
Solution Description Photo Our match
Industrial buscommunication
All E-pumps are equipped with a s tandardRS485 GENIbus interface.
This means that we can convert anyfieldbus standard on the marked. Thisgives you some advantages both relatedto operation of pump and monitoring ofpump and system.
Sensor
Grundfos offers a number of sensors to beused in connection with E-pumps. All sensorsare with 4 - 20 mA output signal.Pressure sensors: 0 - 25 barTemperature sensors: 0 - 100°CDifferential pressure: 0 - 16 barFlow meters: 0.3 - 240 m³/h
If you need sensors in the system, theycan be supplied and delivered togetherwith the pump. If you have an E-solution,
you can furthermore have the softwarepreset, so the pump knows the signaland measuring range of the sensor whendelivered. This means saving on commis-sioning time.
Hydro MPC booster– a multi-pumpcontrol system forcontrol of parallel-connected pumps
If you want reliability and optimum per for-mance in your cooling system, t hen parallelpumps could be the solution. Because nomatter the duty point we will be able toswitch pumps in and out depending on theneed. Booster sets from Grundfos are avail-able for any type of pump.
An option if you have two pumps con-nected in parallel running at 75%. Then
you will able to do all the cooling with onlyone pump when the wind is not so strong.If you are on full load with the turbine andone pump fails, you will be able to producesome energy until you can repair.
vindmøllebrochure.indd 28 9/4/2012 12:35:49 PM
-
8/15/2019 Grundfos and Wind Turbines
29/32
29
When you make a offshore wind farm it is necessary to pro-
tect the fish in the water against the noise when hammer-
ing the turbine pile into the seabed. This is done by installing
a cofferdam outside the pile draining off the water in the
space between the two piles. This will reduce the noise to
the sea and when the wind turbine pile is hammered into
the seabed the cofferdam is lifted away and it is ready to be
used for the next pile.
vindmøllebrochure.indd 29 9/4/2012 12:35:56 PM
-
8/15/2019 Grundfos and Wind Turbines
30/32
30
SP SYSTEMSFor water supply
WHEN WATER NEEDS TOMOVE! COMPLETE SUBMERSIBLE PUMP SYSTEMS
The SP range is your guarantee of high-quality water supply.
Capable of handling flows up to 470 m3/h and heads up to 810 m,
SP systems give you everything you need from a single supplier.
A total system combines a stainless-steel SP submersible pump, an
MS/MMS motor made specifically with submersible pump applica-
tions in mind and an MP 204 motor protection unit for added reli-
ability. The complete package gives you complete peace of mind bymaking sure your water supply application works every time. And
all the time.
STAINLESS STEEL TO HANDLE ALL ENVIRONMENTSSP systems are used worldwide wherever efficient water handling
is called for. The main application areas are irrigation of farmland
and groundwater extraction for tap water, but there are many
other, more specialised uses. Impressive water fountains and
saltwater fish farms are just two examples – see below for more.
Wherever you need water to move, SP systems will do it with com-
plete reliability.
SP SYSTEM HANDLES TOUGH JOBSHigh quality quickly becomes apparent when the job gets difficult.
It usually does. The SP pump resists sand and other abrasives; it
keeps operating when others give up. You can even choose extra
high-grade stainless steel for very severe conditions. What is more,
a range of protection features prevent damage if things get too
tough even for the SP. It is no wonder that you find SP solutions
in the toughest environments – e.g. mines and offshore industries
worldwide.
vindmøllebrochure.indd 30 9/4/2012 12:36:02 PM
-
8/15/2019 Grundfos and Wind Turbines
31/32
31
THE FUTUREWe are ready
PARALLEL PUMPSWhere the future will take us regarding cooling in wind turbines we do not know. But with the
increase in size of the turbines there is no doubt that the need for cooling will also increase. And the
reliability of the systems will become bigger and bigger because it will cost more and more if the
turbine stops. These things are pointing more and more in the direction of double pump solutionsrunning in duty/standby or duty/assist. Especially the duty/assist function is interesting, because it
could very often be relevant to size maybe two 75% pumps in parallel or three 50% pumps in parallel,
all depending on your control strategy, your operation pattern and so on. Because how often does
your turbine actually run full load…? An example of a booster set could be as shown above.
Other solutions that could be relevant in the future, could be sea water cooling of offshore turbines
and maybe also compressor technology with a cooling refrigerant. In both instances Grundfos has the
know-how, experience and products that could help. Some of the advantages of these two systems
could be:
SEAWATER COOLING:• Always enough cooling capacity.
• Space savings in the nacelle because you would not need the big air/glycol heat exchanger.• You could build up the system as a standard commercial building cooling system.
COMPRESSOR TECHNOLOGY.• Space saving because you can make the heat exchanger around 50% smaller with a refrigerant
compared to air.
• Always enough cooling capacity no matter the size of turbine.
FIRE PUMP SYSTEMSWe design and build systems ranging from simple pump-driver systems on a base frame to highly
engineered and fully enclosed, packaged systems. We are proud to have the widest range of fire
pump approvals and listings worldwide, and our expertise enables us to engineer, produce, stock,
distribute and service our products all over the world. There are three main reasons for choosing fire
pumps that are approved and certified by accredited third party authorities. Firstly, based on the mas-
sive experience embodied in leading fire protection, regulations and codes, approved systems reduce the
risk of harm to life and damage to property in the case of fire. Secondly, approved systems provide maxi-
mum reliability and superior quality. Thirdly, using approved and listed fire pumps typically reduces insur-
ance rates significantly. When third party approval is not required for a fire pump installation, Grundfos
can supply non-listed fire systems that comply with specific fire standards.
vindmøllebrochure.indd 31 9/4/2012 12:36:41 PM
-
8/15/2019 Grundfos and Wind Turbines
32/32
T h e n a m e G r u n d f o s , t h e G r u n d f o s l o g o , a n d t h e p a y o ff B e
– T h i n k – I n n o v a t e a r e r e g i s t r a t e d t r a d e m a r k s o w n e d b y G r u n d f o s M a n a g e m
e n t A / S o r G r u n d f o s A / S , D e n m a r k .
A l l r i g h t s r e s e r v e d w o r l d w i d e .
GRUNDFOS DK A/SMartin Bachs Vej 3
DK 8850 Bj i b
Grundfos Blueflux® is your guarantee
Grundfos Blueflux® motors are designed to cut electricity
consumption by up to 60% and thus lower CO2 emissions
and operating costs.
Grundfos: a pump for every purpose
Grundfos offers much more. A complete range of pump
solutions means that all applications can benefit from
the Grundfos touch.
• Heating
• Cooling
• Water supply
• Wastewater
• Fire fighting
• Dosing
• Industrial processes