gujcost sponsored two days webinar entitled “latest
TRANSCRIPT
GUJCOST sponsored Two Days Webinar entitled “Latest Technology Trends in Design &
Manufacturing” during 25th ,26th March, 2021”.
Much has been said about Industry 4.0, and how it has revolutionized the manufacturing world
by providing with ample opportunities to utilize advanced design tools and technologies
throughout the product lifecycle. There’s no doubt that Industry 4.0 has enabled manufacturers
to increase operational visibility, reduce costs, expedite production times, and deliver
exceptional customer support. As 2021 rapidly approaches, it’s time to turn our attention away
from Industry 4.0 and towards Industry 5.0.
To give the insight about the latest technology trends used in design and manufacturing field of
mechanical engineering and technology, with the consistent guidance from the principal Dr D J
Shah sir, constant encouragement and support from Honorable Provost, Dr Vijay Srivastava Sir
and Honorable President of Sankalchand Patel University , Prakashbhai Patel sir, , the
Mechanical Engineering department of Sankalchand Patel College of Engineering has arranged
the brain storming and power pack sessions of Academicians from few of the premier technical
institutions across the state. Today on 25 th March,2021, the sessions of Design Field such Keynote Speaker Session of Dr.
Dharmendra S Sharma (Professor & Head, Deptt of Mech Engg), M. S. University of Baroda, Vadodara,
A session of Dr. Vinod N Patel, Professor (Mechatronics Engg Department), G H Patel College of
Engineering & Technology, V V Nagar, Session of Dr. Bhavesh P Patel, Professor (Mech Engg
Department), U V Patel College of Engineering, Kherva are arranged.
On 26 th March, 2021, the sessions of Manufacturing Field i.e. A Session of Prof. (Dr).
Jeetendra A. Vadher, Professor & Head (Mech Engg Department), Government Engineering
College,Palanpur, Session of (Dr). Harshitkumar K. Dave, Associate Professor (Mech Engg Deptt)
Sardar Vallabhbhai National Institute of Technology, Surat, A session of Prof. Vikram A Patel,
Head, Mechanical Engineering Department, Shree Swaminarayan Polytechnic, Gandhinagar are
arranged.
