S N

S

S

S S

S

SCV W

HANTEMP Controls

NEW

NEW

QSV Q

HANTEMP Controls810 Burr Oak Drive, Westmont, IL 60559 USA(630) 537-1049 | info@hantemp.com | www.hantempcontrols.com

Credit Cards Accepted:

SSBV 1" flanged with Bar Handle/

Seal Cap

SSBV 2" flanged with Bar Handle/Seal Cap and

Lock-Out/Tag-Out SSBW 2" Weld In-Line with Electric Actuator*

SSBV COBRA-NECK® Ball Valve prices listed below are list each with Bar Handle/Seal Cap. Refer toActuator Options below for motorized control. Flange connection options are detailed on page 3. Specify flange connection and type when ordering. Weights are in pounds (lbs).

Actuator Options:Available voltages, 24/115/220V A/C 50/60Hz. 12V & 24V DC. All actuators include manual overide feature for opening and closing. Customer may supply actuator: standard ISO F05 mounting.

Option 1. Actuator with Open/Close control only. $550.00 list each

Option 2. Actuator with Open/Close control, heater, battery back up, and speed control for slow opening. $1,200.00 list each

Option 3. Actuator with 4-20mA, proportional control with feed back, heater, and battery back up. $2,200.00 list each

SSBV COBRA-NECK® BALL VALVES LIST PRICES316L Stainless Steel Extended Neck for insulating Tight ClosingISO F05 Direct Mounting

Keyed lock for Lock-Out/Tag-Out including tag, $200 list each.

1" $1,290 $1,458 13 $1,419 5

1-1/4" $1,490 $1,658 15 $1,639 5

1-1/2" $1,800 $2,290 26 $1,980 12

2" $1,900 $2,390

28 $2,090 12

2-1/2" $2,100 $2,590

30 $2,310 12

SW or BW Shipping Weld In Line Shipping

Less FlangesWith Flanges

3/4 5

(2)

LP0615a

$2,950 27-------- --------

$990 $1,158 11 $1,089

_____3"____________________________________________________ ________________

_______________________

_______________________

All COBRA-NECK® Ball Valves are supplied with a full port ball. Characterized (v-port) type balls are available for modulating flow, and slow opening or controling applications. Contact factory for details. Pneumatic actuators have

spring return standard.

FlangedWeight WeightButt WeldSize

_______________________________________________________________________________________________

†

Drop in for R/S Parker & Hansen†

SSBW 2" Weld In-Line

SEE-SWITCH® Stainless Steel Float Switch

316 Stainless Steel TankDIN connection with wire leads450 psig SWPNeon yellow switch position indicator wand

Model SSLL - 3/4" FPT/1" BW side and bottom conections

SSLL Stainless Steel Float Switch $750 8

2LS Switch Assembly Replacement

5 LT Tank Assembly,only

0.5 HTR 10 Watt 24 VAC Switch Heater $200

1

EZWLD 316L Stainless Steel Flange Kits for COBRA-NECK® Ball Valves & Others. Compatible with Hansen, R/S, and Henry. Also Stainless Steel Flange Unions

3/4" , 1", 1-1/4" Flange Kits and Flange Unions (nominal size 100) Socket Weld and Butt Weld $170 list. Shipping weight 3.0 lbs.

1-1/2" and 2" Flange Kits and Flange Unions (nominal size 200).1-1/2" and 2" Socket Weld, 1-1/2", 2", and 2-1/2" Butt Weld$490 list. Shipping weight 9.1 lbs.

2-1/2" and 3" Flange Kits and Flange Unions (nominal size 300).2-1/2" Socket Weld, 2-1/2" & 3" Butt Weld$980 list. Shipping weight 16.5 lbs

Flange Kit includes 2 male tongue flanges, stainless steel nuts & bolts, and gaskets. Flanged Union Kits include one male tongue flange, one female groove flange, stainless steel nuts & bolts, and gasket. Prices are list each per kit, or per union. (Schedule 10 or 40 end connections available for butt weld flanges)

2 Bolt Oval Flange

2 Bolt Flange Union

4 Bolt SquareFlange

4 Bolt Square Flange Union

(3)

LP0615a

List PricesShipping Wgt (lbs.)_________________________________________________________________________Stainless Steel Switch Cover

$596

$98

$398

is a compact 316L stainless steel ball valve that is flanged on one end and welded directly in-line on the other end is an ideal isolation valve for service since it can be close coupled to other flanged valves of similar dimension such as 100 size Parker-R/S. Applications include service valve for the COBRA-NECK® ball valve, close coupling to size 100 flanged check valves, and

is supplied with a seal cap, and features a 1/4" gauge port for oil draining and pump out. groove on the inlet of valve body isallows the valve to be welded in line without being dissassembled.

is light weight, (2.10 lbs), and very compact. Available port s g SWP.

Stainless Steel low pressure drop weld in-

features a 316L welded stainless steel body that needs no valve can be welded directly in-line. Available in port

g SWP. Shipping weight 3 lbs.

$392 $490 $580

NEW

(4)

LP0615

Butt -Weld:specify Schedule 40 (std) or 10 pipe

To order: Contact factory at (630) 537-1049 or email sales@hantempcontrols.com.

SSBV COBRA-NECK® Ball Valve Ordering Instructions:Specify port size, flanged or weld in-line (connection sizes), andapplication details including refrigerant, temperature and pressure(s).For actuators: specify voltage and control function, along with special features such as 4-20mA control.EZWLD Flange and Union Ordering Instructions:Specify size and connection; for butt weld flanges, specify Schedule 10 or Schedule 40 pipe wall.

All prices detailed above are list each. FOB factory - Westmont, IL 60559 USA

For warranty conditions, please visit www.hantempcontrols.com.

Credit Cards Accepted