hardware & hand tools - bd companyb-dco.com/content/catalog/hardwareandhandtools.pdf · b-d...
TRANSCRIPT
B-D Company Section 9 - Page 1 303.744.1405 1.800.748.2244
MANUFACTURER & DISTRIBUTOR OF FINE AUTOMOTIVE PRODUCTS
Your One Stop Shop For Specialty Automotive Products
Proudly Made in the USA
Hardware & Hand Tools
Snap Fasteners Turn Fasteners
Curtain Fasteners Tenex Fasteners
Grommets Snap Hooks & D-Rings
Upholstery Tools
1360 S. Acoma St. Denver, CO. 80223
303.744.1405 800.748.2244
www.b-dco.com
B-D Company Section 9 - Page 2 303.744.1405 1.800.748.2244
Table of Contents
Snap Fasteners - Brass/Nickel Snap Fasteners - Special Studs Snap Fasteners - 100% Stainless Steel Snap Fasteners - Black Oxide Colored Caps Carpet Snaps & One Way Pull Snaps Alternative Snaps & Baby Snaps Quick Fit Kit - Snap Positioning System Turn Fasteners - Brass/Nickel Curtain Fasteners - Brass/Nickel Curtain Fasteners - Brass/Black Oxide Snap Fasteners Tools Tenex Fasteners Grommets & Washers Hoover Pres-N-Snap Products Snap Hooks, D-Rings & Other Specialty Items Grommet & Snap Fastener Kits Chalk & China Markers Hole Punches Awls Hammers Needles Sewing Machine Needles & Seam Ripper Pins, Tacks, Nails, & Skife Knife Automatic Awls Hog Rings & Tools Tucking Tools Shears Button Tufting Tools Auto Trim Works Tool Glass Related Tools Miscellaneous Tools Rivet & Accessories OEM Style Seat Clips
3
4
5
6
7
8
9
10
11
12
13
14 - 15
16
17
18
19 - 21
22
23
24 - 25
26
27
28
29
30
31
32
33
34 - 35
36
37
38 - 39
40 - 41
42 - 44
45
B-D Company Section 9 - Page 3 303.744.1405 1.800.748.2244
Snap Fasteners - Caps, Socket, Studs, and Eyelets
Brass/Nickel Cap with Brass/Nickel 3/16” Post B-D Part #: BN4647AR DOT#: X2-10128
Brass/Nickel Cap with Brass/Nickel 1/4” Post B-D Part #: BN4647LAR DOT#: X2-10127
Standard action sockets are made with brass springs that have been nickel plated for corrosion resistance. Hard action sockets are made with phosphor bronze springs that have been copper/nickel/chrome plated for maximum corrosion resistance.
Brass/Nickel Regular Action Socket B-D Part #: BN4647B DOT#: XB-10224
Brass/Nickel Hard Action Socket B-D Part #: BN4647HB DOT#: XX-10224
Available with either an elevated base, for use with eyelets on fabric applications, or with a low base which requires either a screw or rivet. Also offered flangeless, for use on convertible tops, specially designed fastening clips, or in marine applications, can be attached with a screw, rivet, or eyelet.
Brass/Nickel Low Base Stud (Use with Screw or Rivet) B-D Part #: BN4647SC DOT#: BS-10379
Brass/Nickel High Base Stud (Use with Eyelet) B-D Part #: BN4647C DOT#: BS-10370
Brass/Nickel Rivet Type Flangeless Stud with .020-.087” Grip Range B-D Part #: RIV10314 DOT#: XB-10314N
Brass/Nickel Rivet Type Flangeless Stud with .188-.375” Grip Range B-D Part #: RIV10319 DOT#: XB-10319N
Brass/Nickel Flangeless Stud (Use with Screw, Rivet, or Eyelet) B-D Part #: BN4647FLC DOT#: BS-10373
Used when either attaching a stud or a socket, our eyelets are available in three different lengths for varying material thickness.
Brass/Nickel Eyelet with Standard 1/4” Barrel B-D Part #: BN4647D DOT#: BS-10412
Brass/Nickel Eyelet with Long 5/16” Barrel B-D Part #: BN4647LD DOT#: BS-10413
Brass/Nickel Eyelet with Extra Long 3/8” Barrel B-D Part #: BN4647LLD DOT#: BS-10414
Our premium caps are designed with a unique window cut out which is folded under the post in order to minimize dimpling of the cap. The stainless steel post option eliminates the need for pre-piercing tough fabrics or leathers. (See Page 5) Also available in colors.
B-D Company Section 9 - Page 4 303.744.1405 1.800.748.2244
Snap Fasteners - Special Studs
Frequently referred to as “Double Studs” because of their special ability to join the stud fastener to another stud or socket, Gypsy Studs are generally used to connect more than two fabrics together.
Brass/Nickel Gypsy Stud with Short 7/32” Post B-D Part #: BNCP232NBS
Brass/Nickel Gypsy with Medium 1/4” Post B-D Part #: BNCP232NB DOT#: XB-10372
Used in a variety of applications with attached self-tapping or machine screw. Also available in a #10 Oversize Screwstud for stripped hole application and 100% Stainless Steel (See Page 5) for complete rust resistance, AND available in GOLD (See Page 8).
Brass/Nickel Stud with Steel 3/8” Screw B-D Part #: BN705914 DOT#: XX-103624
Brass/Nickel Stud with Steel 5/8” Screw B-D Part #: BN705920 DOT#: XX-103627
Brass/Nickel Gypsy with Long 11/16” Post B-D Part #: BNCP232NBL
Brass/Nickel Stud with Stainless Steel 3/8” Screw B-D Part #: BNSS705914 DOT#: X8-103934
Brass/Nickel Stud with Stainless Steel 5/8” Screw B-D Part #: BN705920 DOT#: X8-109394
Brass/Nickel Stud with Oversized #10 Stainless Steel 5/8” Screw B-D Part #: BNSS705921 DOT#: X8-109347
Brass/Nickel Stud with Stainless Steel 1” Screw B-D Part #: BNSS705932
Brass/Nickel Stud with Stainless Steel #8-32x5/8” Screw B-D Part #: BNSS705820 DOT#: X8-107044
Brass/Nickel Flangeless Stud with Brass #10-32x3/8” Screw B-D Part #: BNB705614 DOT#: XB-107087
Brass/Nickel Stud with Zinc Plated 1-1/2” Self-Drilling Screw B-D Part #: SN7059T48
B-D Company Section 9 - Page 5 303.744.1405 1.800.748.2244
Snap Fasteners - 100% Stainless Steel
Our premium caps are designed with a unique window cut out which is folded under the post in order to minimize dimpling of the cap. The stainless steel post option eliminates the need for pre-piercing tough fabrics or leathers.
Brass/Nickel Cap with Stainless Steel 3/16” Post B-D Part #: BNS4647AR DOT#: X8-10128
Brass/Nickel Cap with Stainless Steel 1/4” Post B-D Part #: BNS4647LAR DOT#: X8-10127
Stainless Steel Cap with Stainless Steel 3/16” Post B-D Part #: SS4650AR DOT#: XN-10128
Standard action sockets are made with brass springs that have been nickel plated for corrosion resistance. Hard action sockets are made with phosphor bronze springs that have been copper/nickel/chrome plated for maximum corrosion resistance.
Stainless Steel Regular Action Socket B-D Part #: SS4650B DOT#: XN-10224
Stainless Steel Hard Action Socket B-D Part #: SS4650HB
Stainless Steel Stud with Stainless Steel 3/8” Screw B-D Part #: SSSS705914 DOT#: XN-103934
Stainless Steel Stud with Stainless Steel 5/8” Screw B-D Part #: SSSS705920 DOT#: XN-103937
Used in a variety of applications with attached self tapping or machine screw. Also AND available in GOLD. (See Page 8)
For use in marine and automotive applications, our windshield clips are 100% Stainless Steel.
Stainless Steel 3/4” Windshield Clip (0.760” Clip Width) B-D Part #: CLIP34WSD DOT#: XX-10388
Stainless Steel 7/8” Windshield Clip (0.875” Clip Width) B-D Part #: CLIP78WS DOT#: XX-10391
Used when either attaching a stud or a socket.
Stainless Steel Eyelet with Standard 1/4” Barrel B-D Part #: SS4647D DOT#:
B-D Company Section 9 - Page 6 303.744.1405 1.800.748.2244
Snap Fasteners - Black Oxide
Our premium caps are designed with a unique window cut out which is folded under the post in order to minimize dimpling of the cap. The stainless steel post option eliminates the need for pre-piercing tough fabrics or leathers.
Brass/Black Oxide Cap with Brass/Nickel 3/16” Post B-D Part #: BB4647AR DOT#: X2-10128-1B
Brass/Black Oxide Cap with Brass/Nickel 1/4” Post B-D Part #: BB4647LAR DOT#: X2-10127-1B
Standard action sockets are made with brass springs that have been nickel plated for corrosion resistance. Hard action sockets are made with phosphor bronze springs that have been copper/nickel/chrome plated for maximum corrosion resistance.
Available with an elevated base, for use with eyelets on fabric applications, or available as a screwstud.
Brass/Black Oxide Regular Action Socket B-D Part #: BN4647B DOT#: X2-10128-1B
Brass/Black Oxide High Base Stud (Use with Eyelet) B-D Part #: BB4647C DOT#: BS-10370-1C
Used when either attaching a stud or a socket.
Brass/Black Oxide Eyelet with Standard 1/4” Barrel B-D Part #: BB4647D DOT#: BS-10412-1C
Brass/Black Oxide Stud with Steel 5/8” Screw with 6-Star Drive Head B-D Part #: BB704916
Brass/Black Oxide Cap with Stainless Steel 3/16” Post B-D Part #: BBS4647AR
Brass/Black Oxide Cap with Stainless Steel 1/4” Post B-D Part #: BBS4647LAR
Brass/Black Oxide Hard Action Socket B-D Part #: BN4647HB DOT#: X2-10127-1B
B-D Company Section 9 - Page 7 303.744.1405 1.800.748.2244
Snap Fasteners - Special Cap Colors
Our colored caps are four durable layers of baked automotive enamel, UV stabilized, can be dry cleaned and are scratch/chip resistant.
Brass/Black Enamel Cap with Stainless Steel 3/16” Post B-D Part #: BNS4647BLK
Available in 18 stocked colors:
Brown Imperial Blue Maroon Enamel Teal
Buckskin Jockey Red Medium Gray Toast
Burgundy Light Gray Navy Turquoise
Charcoal Marine Blue Neptune Blue White
Forest Green Sapphire Blue
B-D Company Section 9 - Page 8 303.744.1405 1.800.748.2244
Snap Fasteners - Carpet Snaps and One-Way Pull Snaps
Used easily in applications to secure delicate material that otherwise might tear with smaller fastening devices, the fasteners attach to screwstuds , regular and rivet studs.
Brass/Black Oxide Carpet Socket B-D Part #: BB10122 DOT#: XB-10222
Brass/Brass Oxide Carpet Ring B-D Part #: BB10123 DOT#: BS-10123
One-Way Pulls lock on three sides and are commonly used to secure products that are in high stress areas or need to be child-resistant.
Brass/Nickel Cap with Brass/Nickel 11/64” Post B-D Part #: PDBN18100 DOT#: XE-18100
Brass/Nickel Socket B-D Part #: PDBN18201 DOT#: XB-18201
Brass/Nickel Stud B-D Part #: PDBN18303 DOT#: BS-18303
Brass/Nickel Stud with Stainless Steel 3/8” Screw B-D Part #: PDBN183074 DOT#: XB-183074
These caps, flangeless studs, and screwstuds are 24k Gold Plated with an extra coating of clear lacquer to provide additional wear and corrosion resistance.
Brass/Gold Plated Cap with Brass/Nickel 3/16” Post B-D Part #: BNG4647AR
Brass/Gold Plated Flangeless Stud B-D Part #: BNG4647FLC
Brass/Gold Plated Stud with Stainless Steel 3/8” Screw B-D Part #: BNSG705914
Brass/Gold Plated Stud with Stainless Steel 5/8” Screw B-D Part #: BNSG705920
Brass/Gold Plated Stud with Stainless Steel 1” Screw B-D Part #: GNSG705932
B-D Company Section 9 - Page 9 303.744.1405 1.800.748.2244
Snap Fasteners - Alternative Snaps & Baby Snaps
These alternative fasteners are a quality cost-efficient fastener for products such as outdoor furniture, luggage, sports bags, and light duty automotive trim. Steel/Nickel series for interior use only.
Steel/Nickel Cap with Standard 3/16” Post B-D Part #: SN7050A
Steel/Nickel Regular Action Socket B-D Part #: SN7050B DOT#: XB-18201
Steel/Nickel High Base Stud (Use with Eyelet) B-D Part #: SN7050C DOT#: BS-18303
Steel/Nickel Stud with Standard 1/4” Post B-D Part #: SN7050D DOT#: XB-183074
Brass/Nickel High Base Stud (Use with Eyelet) B-D Part #: BN7047C
Brass/Nickel Eyelet with Standard 1/4” Post B-D Part #: BN7047D
Brass/Nickel Regular Action Socket B-D Part #: BN7047B
Brass/Nickel Cap with Standard 3/16” Post B-D Part #: BN7047AR
Brass/Nickel Cap with Long 5/16” Post B-D Part #: BN7047LAR
This smaller fastener line offers a trimmer looking, less aggressive snap, and is available in 2 finishes. All the following are 20 ligne snaps.
Brass/Nickel Baby Cap with Standard 9/64” Post B-D Part #: BND7201A13 DOT#: XB-12105
Brass/Nickel Regular Action Baby Socket B-D Part #: BND7201B DOT#: XB-12205
Brass/Nickel Baby Stud B-D Part #: BND7201C DOT#: BS-12303
Brass/Nickel Baby Eyelet with 7/32” Post B-D Part #: BND7201D DOT#: BS-12402
Brass/Black Oxide Baby Eyelet with 7/32” Post B-D Part #: BBD7201D DOT#: BS-12402-1C
Brass/Black Oxide Regular Action Baby Socket B-D Part #: BBD7201B DOT#: XB-12205-C
Brass/Black Oxide Baby Cap with Standard 9/64” Post B-D Part #: BBD7201A13 DOT#: XB-12105-C
Brass/Black Oxide Baby Stud B-D Part #: BBD7201C DOT#: BS-12303-C
B-D Company Section 9 - Page 10 303.744.1405 1.800.748.2244
Sockets With Pins
Quick Fit Kit - Snap Positioning System
1
50 Sockets with Pin 25 Plastic Holding Caps 1 Release Tool
2
3
4
5
6
7
Plastic Holding Caps
Release Tool
First install the male portions of the snap fasteners (Studs). Snap the Sockets With Pins onto the male portions. (1) Now pull the material into position and poke the first pin head through the material and place the Plastic Holding Cap over the pin to hold the material in place. (2-3) Continue this process. If it turns out that some of the Sockets are not positioned properly, their holding caps can be removed and the material l i f ted and reposit ioned over the pins. (Repositioning can be done over and over until a proper fit is accomplished without damaging the material.) Take release tool to release the socket from the stud. (4-5) Remove the plastic cap and socket from material and use the holes as a guide to set the snaps (6-7)
B-D Company Section 9 - Page 11 303.744.1405 1.800.748.2244
Turn Fasteners - Brass/Nickel
Our Premium Turn Fasteners have an excellent locking action that prevents accidental opening of the fastener. Most of our fasteners feature a stainless steel pin and spring which give superior corrosion resistance and extends the life of the product.
4-Prong Eyelet with Regular Washer B-D Part #: AT M-2B-EW DOT#: BS-78403 & BS-78505
Single Stud with 2 Screw Mounts B-D Part #: AT M-46651 DOT #: XB-78322
Single Stud with #12 Stainless Steel Screw B-D Part #: AT F-6CDS DOT #: XX-783157
4-Prong Eyelet with 4-Hole Washer B-D Part #: AT M-2B-4HEW DOT#: BS-78403 & BS-78510
Double Stud with 2 Screw Mounts B-D Part #: AT M-46652 DOT # XB-78323
Single Stud with Rivet Washer Included B-D Part #: AT M-2M-SSW DOT #: XB-78317
Regular Washer B-D Part #: AT 2-B-W DOT#: BS-78505
Large Washer with 4 Holes B-D #: ATS-2B-4HW DOT #: BS-78510
Single Stud with 2 Prongs Clinch Plate Included B-D Part #: AT M-15 DOT #: XB-78332 & BS-78507
Single Stud with 4 Prongs Clinch Plate Included B-D Part #: AT M-10
An economy version is available for lighter duty, less stressful applications. They are assembled with a spring mechanism that is released when turned by hand.
Single Stud with #12 Steel Screw B-D Part #: AT S-6CD-S-12S
Single Stud with 2 Prongs Clinch Plate Included B-D Part #: AT S-15-S
Single Stud with #7 Brass Screw B-D Part #: AT S-6M-7B
Single Stud with 2 Screw Mounts B-D Part #: AT S-46651
Double Stud with 2 Screw Mounts B-D Part #: AT S-46652
B-D Company Section 9 - Page 12 303.744.1405 1.800.748.2244
Also known as Lift-the-Dot Directional Fasteners. These fasteners lock on three sides and are only opened by lifting the forth side.
Socket with Regular Height B-D Part #: LDBN16205 DOT#: XX-16205
Stud with Stainless Steel 8-32x3/8” Machine Screw B-D Part #: LDBN163624 DOT#: XB-163624
Stud with 2 Prongs B-D Part #: LDBN16349
Socket with Long Height B-D Part #: LDBN16206 DOT#: XX-16206
Plastic Washer for Socket B-D Part #: LDPL16510 DOT#: PS-16510
Stud with 2 Screw Mounts B-D Part #: LDBN16347
Stud with Stainless Steel 8-32x5/8” Machine Screw B-D Part #: LDBN163627 DOT#: XB-163627
Washer for Stud with 2 Prongs B-D Part #: LDBN16501
Clinch Plate for Socket B-D Part #: LDBN16506 DOT#: BS-16506
Covered Socket with Regular Height B-D Part #: BN7150B
Stud with Rivet B-D Part #: LDBN16358 DOT#: XB-16358
Washer for Stud with Rivet B-D Part #: LDBN16509 DOT#: BS-16509
3/4” Windshield Clip B-D Part #: LDBN16376
7/8” Windshield Clip B-D Part #: LDBN16377
Curtain Fasteners - Brass/Nickel
Single Stud with Stainless Steel #8X1/2” Screw B-D Part #: LDBN163606 DOT#: XB-163624
Double Stud with Stainless Steel #8x1/2” Screw B-D Part #: LDBN163186 DOT#: XB-163187
B-D Company Section 9 - Page 13 303.744.1405 1.800.748.2244
Also known as Lift-the-Dot Directional Fasteners. These fasteners lock on three sides and are only opened by lifting the forth side.
Black Oxide Socket with Regular Height B-D Part #: LDBB16205 DOT#: XX-16205-1B
Black Oxide Socket with Long Height B-D Part #: LDBB16206 DOT#: XX-16206-1B
Black Oxide Clinch Plate for Socket B-D Part #: LDBB16506 DOT#: BS-16506-1B
Black Oxide Washer for Stud with Rivet B-D Part #: LDBB16509 DOT#: BS-16509-1B
Black Oxide Stud with 2 Prongs B-D Part #: LDBB16349 DOT#: BS-16349-1B
Black Oxide Washer for Stud with 2 Prongs B-D Part #: LDBB16501 DOT#: BS-16501-1B
Curtain Fasteners - Brass/Black Oxide
Black Oxide Stud with Rivet B-D Part #: LDBB16358 DOT#: XB-16358-1B
B-D Company Section 9 - Page 14 303.744.1405 1.800.748.2244
Snap Fastener Tools
Versatile and easy to use, the Pres-N-Snap Tool is capable of setting numerous brands of fasteners, simply by changing the dies. Many of our dies have rubber retainers to hold the fasteners in place during installation. We offer dies for standard and baby size snaps, regular and self-piercing grommets, and other various specialty applications. Its heat treated cast-aluminum body makes it both lightweight and durable.
Pres-N-Snap Tool kit includes the 4 Snap Fastener Dies: Cap, Socket, Eyelet and Stud, as well as a #1 Grommet Die Set. Other Die sets are available. (See Page 18)
2 Piece Hand Tool - Composed of flaring tool and double-side die.
Baby Snap OSB/229-20
Standard Snap VIC/HAND TOOL
4 Piece Hand Tool - Composes of flaring tool, 2 dies, and the bracket.
Baby Snap OSB/230-20
Standard Snap OSB/230-24
B-D Company Section 9 - Page 15 303.744.1405 1.800.748.2244
Snap Fastener Tools
4 Prong Hand Tool B-D Part #: HOO/C4 DOT #: 450
The C4 cutting punch is designed to prepare various leather, vinyl, and fibrous materials
in order to install the 4-Prong Turn Fastener Eyelet.
4 Prong Hand Tool B-D Part #: HOO/L6 DOT#: 9951
The L6 cutting punch is designed to prepare various leather, vinyl, and fibrous materials
in order to install the 4-Prong Curtain Fastener Socket.
Trimmers can punch holes and install fasteners quicker and easier for marine Biminis, RV front bras & truck tarps, tonneau covers and more. Light weight with finger guard, plastic-coated handles, hardened steel die for clean cut.
Turn Fastener Hand Punch VIC/TOOL 21-05
Curtain Fastener Hand Punch VIC/TOOL 21-10
Trimmers can punch holes and install fasteners quicker and easier for marine Biminis, RV front bras & truck tarps, tonneau covers and more. Light weight with finger guard, plastic-coated handles, hardened steel die for clean cut.
B-D Company Section 9 - Page 16 303.744.1405 1.800.748.2244
Tenax Fasteners
High Quality Original Equipment Fasteners used on many Foreign Convertibles. The 'TENAX' fastener is a self locking fastener which cannot come undone once engaged on its peg unless subjected to extreme force. A quick release is accomplished simply by pinching the head of the 'TENAX' button. All 'TENAX' components are non-rustable, being made from non-ferrous materials (brass) which are nickel-plated. For over seventy years 'TENAX' fasteners have been used in some of the most demanding applications such as Aircraft, Motor, Marine, Coach, Leather and other Trimming related industries. 'TENAX' is used for car soft tops and tonneau covers, pram covers, wet suits, parachute storage, loose covers, car carpets, bags and equipment cases, tents, canopies and awnings, to name but a few. In fact, wherever a compact and secure fitting is required.
Stud with 2 Screw Low Base #B21
2-Piece Large Socket & Plate Made in England #33
Screwstud with Low Shoulder #11
Socket Key #34
B-D Company Section 9 - Page 17 303.744.1405 1.800.748.2244
Grommets and Washers
Stocked in several sizes with Standard and Sharpened Self-Piercing edges. The sharpened versions provide greater piercing capabilities for tougher fabrics. Available in a lacquer brass or nickel plated, both providing superior corrosion resistance.
Grommet Inserting Die Sets are available in all grommet
sizes. OSB/216
Sets plaint rim washer and grommets. Properly machined from high grade tool steel.
“The finest industrial grommet die made.”
Rubber Cutting Pad OSB/603
Made of special formula resilient vinyl plastic. Ideal for use with hole Punches. Long wearing and can used on both sides. Size: 10”x10”x3/8”
The cutting edge is fully tempered all the way
through and properly finished to provide long
use trouble free punching.
Hole Cutting Dies are available in all grommet
sizes. OSB/149
Sharpened Self-Piercing Edge
#2
#1
#4
#3
Grommet Size I.D. Diameter
Available in Brass or Nickel
Available in Brass or Nickel
Available in Brass or Nickel
Available in Brass or Nickel
Available in Brass or Nickel
#0 1/4”
3/8”
5/16”
1/2”
7/16”
Standard Edge
Available in Brass Only
Available in Brass or Nickel
Available in Brass or Nickel
Available in Brass or Nickel
Available in Brass or Nickel
Available in Brass or Nickel
I.D. Diameter
3/16”
1/4”
3/8”
5/16”
1/2”
7/16”
Grommet Size
#00
#0
#2
#1
#4
#3
B-D Company Section 9 - Page 18 303.744.1405 1.800.748.2244
Hoover Pres-N-Snap Products
Versatile and easy to use, the Pres-N-Snap Tool is capable of setting numerous brands of fasteners, simply by changing the dies. Many of our dies have rubber retainers to hold the fasteners in place during installation. We offer dies for standard and baby size snaps, regular and self-piercing grommets, and other various specialty applications. Its heat treated cast-aluminum body makes it both lightweight and durable.
Description Part Number
Pres-N-Snap Pliers HOO/PNS
Replacement Handle HOO/PNS HANDLE
Replacement Lever HOO/PNS LEVER
Replacement
Plunger HOO/PNS PLUNGER
Bench Mount for
PNS HOO/BENCH MOUNT
Description Part Number
Cap Die HOO/BD10128
Socket Die HOO/SD10224
Stud Die HOO/BS10370
Eyelet Die HOO/BS10412
Description Part Number
Stud to Stud Die HOO/FAS P2
Stud/Eyelet Comb.
Die HOO/22
Description Part Number
Rubber Retainer HOO/M2700
Baby Stud Retainer HOO/M4706
"O" Ring for Plunger HOO/SMALL "O" RING
"O" Ringer use on Stud HOO/STUD "O" RING
Description Part Number
4 Baby Dies HOO/BDDS
Description Part Number
Grommet Set Die #00 HOO/00
Grommet Set Die #1 HOO/1
B-D Company Section 9 - Page 19 303.744.1405 1.800.748.2244
Snap Hooks, D-Rings and Other Specialty Items
We offer a wide variety of quality specialty devices. They can be used independently or in conjunction with fasteners, grommets, webbing and shock cord.
Fixed Eye Hook Brass Nickel FAS/FIXEDEYE
Pad Eye Stainless Steel FAS/PADEYESS542
1"x.162" Dia D-Ring Stainless Steel FAS/DRING1SSW
1"x.212" Dia D-Ring Stainless Steel FAS/DRING1SSHW
1" D-Ring Black Delrin Plastic WEB/DR1
1-1/2" D-Ring Black Delrin Plastic WEB/DR15
1" Snap Hook Stainless Steel FAS/SNAPHOOK1SS
1" Snap Hook Black Delrin Plastic WEB/SH1
1-1/2" Snap Hook Black Delrin Plastic WEB/SH15
1-1/16" Slide Buckle Stainless Steel FAS/BUCKLE
B-D Company Section 9 - Page 20 303.744.1405 1.800.748.2244
Snap Hooks, D-Rings and Other Specialty Items
We offer a wide variety of quality specialty devices. They can be used independently or in conjunction with fasteners, grommets, webbing and shock cord.
1" Buckle 3-Piece Set Black Delrin Plastic WEB/BSR1
1-1/2" Buckle 3-Piece Set Black Delrin Plastic WEB/BSR15
2" Buckle 3-Piece Set Black Delrin Plastic WEB/BSR3
1/2” Polypropylene Webbing Black Only
1" Heavy Polypropylene Webbing Black and White
1 1/2" Heavy Polypropylene Webbing Black and White
2" Heavy Polypropylene Webbing Black and White
1/2" Heavy Elastic Webbing Black Only
1" Heavy Elastic Webbing Black Only
1-1/2" Heavy Elastic Webbing Black Only
4" Heavy Elastic Webbing Black Only
Seat Belt Style Webbing **DID NOT PASS 2,000LB TEST**
SB21 Antelope 07G Gray Blue 03P Pale Blue
01B Black SB22 Light Purple Gray 08R Red
05B Burgundy 20N Navy 09R Rust
17C Charcoal OAK Oak 03S Silver
SB01 Dk. Blue 10S Olive 11W White
12G Gray 19O Orange
B-D Company Section 9 - Page 21 303.744.1405 1.800.748.2244
Snap Hooks, D-Rings and Other Specialty Items
1/4" 2 Piece Hook Black Delrin Plastic Coated FAS/SCHOOK142PC
1/4" Black Shock Cord Hook, Long w/ White Tip Black Delrin Plastic Coated FAS/SCHOOK14L
1/4" Black Shock Cord Hook, Short w/ Black Tip Black Delrin Plastic Coated FAS/SCHOOK14S
3/16" Black Shock Cord Hook, Short w/ Black Tip Black Delrin Plastic Coated FAS/SCHOOK316S
3/32" Shock Cord White/Black
1/8" Shock Cord White/Black
3/16" Shock Cord White/Black
1/4" Shock Cord White/Black
5/16" Shock Cord All Black
1/2" Ventilator Brass Nickel FAS/VENT1BNR
These vents provide function and enhance appearance.
We offer a wide variety of quality specialty devices. They can be used independently or in conjunction with fasteners, grommets, webbing and shock cord.
B-D Company Section 9 - Page 22 303.744.1405 1.800.748.2244
Grommet and Snap Fastener Kits
A complete and inexpensive Grommet Kit. Includes a 2 Piece Grommet Die Set, a hole punch, 24 Grommets and Washers, a small cutting board and complete instructions.
1/4" 24 Grommet Kit OSB/K234-0
3/8" 24 Grommet Kit OSB/K234-2
7/16" 24 Grommet Kit OSB/K234-3
1/2" 24 Grommet Kit OSB/K234-4
Snap Set Kits Includes parts to complete six standard or baby brass/nickel snaps, along with flaring tool and die. Comes with instructions on back of display card.
Baby Snap OSB/K229-20
Standard Snap OSB/K229-24
B-D Company Section 9 - Page 23 303.744.1405 1.800.748.2244
Chalk & China Markers
Due to the shape of this chalk, a sharp marking edge is maintained. Clay based and thus it is much easier to erase or brush off. Also works on glass and vinyl that other chalks don't.
Marking Chalk
This superior chalk is 95% pure calcium carbonate and is free of foreign materials that work their way into the board surface causing scratching, streaking and pitting. Round stick 3-1/4" x 3/8" fits many chalk chucks. CP certified non-toxic.
Available in a 4 different colors, china markers are perfect for marking on a variety of porous and non-porous surfaces - glass, paper, metal and more. Markers wipe away clean from any smooth surface. Paper wrapped with tear string for sharpening. Pencil Markers Association certified non-toxic.
Chalk Holder ( Comes with 1
White Piece of Chalk)
Available in White or Yellow
Black, White, Red & Yellow
A white lead pencil as used in sewing is useful to draw in the missing contour so that it is more easily seen. Great for outlining patterns and stencils. High grade pigments provide smooth color application. To remove from fabric, used damp cloth.
Thick White Lead Pencil
B-D Company Section 9 - Page 24 303.744.1405 1.800.748.2244
OSB/149-3/16" #00 Grommet I.D. Size
OSB/149-1/4" #0 Grommet I.D. Size
OSB/149-5/16" #1 Grommet I.D. Size
OSB/149-3/8" #2 Grommet I.D. Size
OSB/149-7/16" #3 Grommet I.D. Size
OSB/149-1/2" #4 Grommet I.D. Size
OSB/149-5/8" #5 Grommet I.D. Size
These hole cutters have a drop forged, hardened, and polished edge. The inside is tapered for easy clearance. Use with corresponding grommets and setting dies.
OSB/500-00A 3/16"
OSB/500-0A 1/4"
OSB/500-1A 9/32"
OSB/500-2A 3/8"
OSB/500-3A 7/16"
OSB/500-4A 1/2"
OSB/500-5A 5/8"
This punch is known as the best Revolving Punch made. The frame is made of forged steel, highly polished. Cutting tubes are turned from special carbon tool steel and threaded to allow easy replacement. These tubes are individually hardened. The reach or distance from the cutting tube to the back of jaw is 1 1/2”. Tube sizes 1-6 are provided with tool.
Replacement tubes are available. Revolving Punch - OSB/155
Punch Tube #0 5/64"
Punch Tube #1 3/32"
Punch Tube #2 7/64"
Punch Tube #3 1/8"
Punch Tube #4 5/32"
Punch Tube #5 11/64"
Punch Tube #6 3/16"
Punch Tube #7 13/64"
Hole Punches
Replacement Brass Anvils are available
Our arch punches are drop forged in one piece from the finest special carbon steel in sizes from 3/16" to 2-1/4" diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of these arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel and black enamel handle. The cutting edge is fully tempered all the way through and properly finished to provide long use trouble free punching. There is no other hollow punch that can compare.
B-D Company Section 9 - Page 25 303.744.1405 1.800.748.2244
Punch Tube #0 5/64"
Punch Tube #1 3/32"
Punch Tube #2 7/64"
Punch Tube #3 1/8"
Punch Tube #4 5/32"
Punch Tube #5 11/64"
Punch Tube #6 3/16"
Mini Punch Kit - OSB/K-157
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
1"
This handy and versatile kit contains threaded handle with self-centering pointed plunger. This threaded handle will accommodate nine interchangeable threaded cutting tubes. The punches in this set will cleanly cut leather, rubber, paper, plastics and other soft materials. The self-centering point makes these punches ideal for cutting concentric washers in small quantities by hand. Sizes of punches listed below. All cutting edges properly hardened. The only professional tool like it. Comes in a sturdy plastic box for storage.
Self Centering Punch Set
OSB/K-156
Punch Sizes
These sets, each containing seven arch punches, includes either the sizes most widely
used, or sizes incremented by 1/8”. They are put up in a sturdy, easy to use canvas tool
roll as shown.
Arch Punch Set OSB/K-14
3/4"
7/8"
1"
1/4"
3/8"
1/2"
5/8"
Arch Punch Set OSB/K-16
3/16"
5/16"
7/16"
9/16"
11/16"
13/16"
15/16"
Hole Punches
A special punch set for cutting small, precise holes in soft materials where throated or plier punches won't reach. Set has a round handle with slot inside to clear punchings. Handle is threaded to accommodate the seven interchangeable screw tubes. Replacement tubes are available.
B-D Company Section 9 - Page 26 303.744.1405 1.800.748.2244
Awls
Heavy Duty Scratch Awls available in 4 popular sizes. Best quality polished steel blades with rugged plastic handles.
Part # Length
OSB/4-1 2-1/2"
OSB/4-2 3-1/2"
OSB/4-3 4-1/2"
OSB/4-4 5-1/2"
Staple Remover - OSB/120-1/2
Staple Remover - OSB/124
The correct angle for removing staples of any size. Manufactured from top grade steel. Electronically hardened working ends. Easy to grip plastic handle.
Forged from 4140 alloy tempered steel. A consistently made quality product. Carefully hardened for lasting use. 6” overall length with hardwood handle.
Ends are hardened and tempered to prevent breakage. Rugged plastic handle for heavier use and more leverage.
Tack Claw - OSB/202
Made of the finest steel with both hook and pointed blade. Used for ripping seams. Cuts auto carpeting, plastic and rubber. Beechwood handle contoured to fit hand.
Combo Knife - OSB/1020
B-D Company Section 9 - Page 27 303.744.1405 1.800.748.2244
This versatile magnetic hammer is used in many trades. Made of forged steel and has a fully polished split head with a hickory handle. Made to U.S. Government specifications.
Magnetic Hammer - OSB/222
Hammers
Solid head of bright bronze. Steel tipped at one end for permanent magnetic and at the other for hammering. Balanced design, hickory handle. Weighs only 11 ounces.
Bronze Magnetic Hammer -
OSB/33
Ideal for use with punches, grommet dies and whenever a cushioned blow is desired. Faces are replaceable. Faces also available in Nylon and Urethane.
Rawhide Hammer - OSB/395
Rawhide Hammer Urethane Faces
OSB/395-1U
The head of this light-weight mallet is made entirely of rolled water buffalo rawhide. Handle is white hickory. It is recommended for many jobs where the user wishes to avoid scaring.
Rawhide Hammer - OSB/196
B-D Company Section 9 - Page 28 303.744.1405 1.800.748.2244
Needles
Leather Point
Length Gauge Part #
2" 19 503 2
2-1/2" 19 503 2.5
3" 16 503 3
3-1/2" 16 503 3.5
4" 15 503 4
5" 15 503 5
Round Point
Length Gauge Part #
2" 19 501.5 2
2-1/2" 18 501.5 2.5
3" 18 501.5 3
3-1/2" 17 501.5 3.5
4" 16 501.5 4
5" 15 501.5 5
Nickel plated needles with three different points, varying lengths and gauges.
Needle Kit - OSB/K-1
2ea Curved Upholstery Needles
1ea Special bent needle for sewing up fowls or wherever sewing with a string is needed
1ea Awning or canvas needle (Can be used on sails too)
1ea Carpet or very heavy material needle
1ea 3" Curved Round Point Needle
1ea 4" Curved Round Point Needle
1ea 5" Curved Round Point Needle
1ea 6" Curved Round Point Needle
1ea 3" Curved Square Point Needle
1ea 4" Curved Square Point Needle
1ea 5" Curved Square Point Needle
1ea 6" Curved Square Point Needle
1ea 6" Straight Round Point Needle
1ea 8" Straight Round Point Needle
1ea 10" Straight Round Point Needle
1ea 12" Straight Round Point Needle
Needle Kit - OSB/K-3
Needle Kit - OSB/K-4
Needle Kit - OSB/K-5
Square Point
Length Gauge Part #
2" 19 502.5 2
2-1/2" 18 502.5 2.5
3" 18 502.5 3
3-1/2" 17 502.5 3.5
4" 17 502.5 4
5" 16 502.5 5
B-D Company Section 9 - Page 29 303.744.1405 1.800.748.2244
Sewing Machine Needles & Seam Rippers
Beka brand high quality industrial sewing machine round point needles stocked in different diameters for Alder 67, Alder 67-273, Juki 562, Phaff and Singer.
Size Diameter
Adler
#134-35R 140, 160 & 180
#134R 130, 140 & 160
Juki 562 #135x17 120, 130, 140, 160 & 180
Phaff #190R 130, 140 & 160
Singer #135x17 120, 130, 140, 160 & 180 (Same as Juki 562)
Seam Ripper - 109R Seam Ripper - 110R
Seam Ripper - 111R Seam Ripper - 112R
A seam ripper, stitch ripper or stitch un-picker is a small tool used for unpicking stitches. The most common form consists of a handle, shaft and head. The head is usually forked with one side of the fork flattening out and becoming a blade and the other side forming a small point. In some designs the blade side then tapers back to a point to allow easier insertion in tight stitching. In use the blade is inserted into the seam underneath the thread to be cut. The thread is allowed to slip down into the fork and the tool is then lifted upwards allowing the blade to cut through the thread. Once the seam has been undone in this way the loose ends can be removed and the seam re-sewn.
B-D Company Section 9 - Page 30 303.744.1405 1.800.748.2244
Pins, Tacks, Nails, and Skife Knife
Makes a remarkable easy job of skiving leather and other materials. Increases both speed and accuracy. This essential tool is fitted with a special razor blade.
Upholstery Pin - OSB/190
1-1/4" - Made of High Quality
Steel. Nickel Finish.
Sold in 1/2lb Boxes.
16 Gauge 3” High Quality Pins
1lb Blued Sterilized Upholstery
Tacks - 11/16” - OSB/689-12
1lb Blued Sterilized Upholstery
Tacks - 1/2” - OSB/689-6
1lb Blued Sterilized Upholstery
Tack- 3/8” - OSB/689-3
“T” Pin - OSB/189
1lb Blued Sterilized Upholstery
Tacks, Corrugated - 11-16” -
OSB/689-12C
Flat Head Needle Point
7/8” x 12 Tufflyx Screw Nails -
VIC/V7605
Replacement Skife Blades
(20 each) - OSB/925-D
Skife Knife -
OSB/925
B-D Company Section 9 - Page 31 303.744.1405 1.800.748.2244
Automatic Awl
Ideal for sewing leather, canvas and similar materials. The awl carries a reel of black thread in the handle. Hollow handle holds extra curved needle and wrench. Directions furnished with each awl explaining how automatic lock stitch can be effective in repair work. Comes with one straight and one curved square pointed needles.
Automatic Awl -
OSB/413
Black Reel -
OSB/413R B
Black 1/4” Spool -
OSB/413ST B
Brown Reel -
OSB/413R BR
Brown 1/4” Spool -
OSB/413ST BR
White Reel -
OSB/413R W
White 1/4” Spool -
OSB/413ST W
#8 Curved Needle -
OSB/413N 8C
Coarse Straight Needle -
OSB/413N 8
Curved Needle -
OSB/416N 6 Short Straight Needle -
OSB/413N 5
B-D Company Section 9 - Page 32 303.744.1405 1.800.748.2244
Hog Rings and Tools
Hog rings and their corresponding pliers are used in countless applications and industries. Including nursery, cages, fencing, erosion control, bedding and the
automotive industry.
3/4" Steel Hog Rings.
Appx. 450 each per Pound.
Sold by the Pound or in 25lb
Boxes.
Inexpensive Pliers - REP/SF
Good for 10-20 Hog Rings
Straight Pliers - REP/XX Vinyl Handles with Closing
Spring
Offset Pliers - REP/XXL Vinyl Handles with Closing
Spring - Bent at 135°
Bent Pliers - REP/L Vinyl Handles with Closing
Spring - Bent at 135°
Straight Pliers - OSB/1440AC Vinyl Handles with Closing
Spring
Offset Pliers - OSB/1440BC Vinyl Handles with Closing
Spring - Bent at 135°
Bent Pliers - OSB/1440CC Vinyl Handles with Closing
Spring - Bent at 135°
Bent Pliers - OSB/2360T-M Vinyl Handles with No
Spring - Bent at 135°
B-D Company Section 9 - Page 33 303.744.1405 1.800.748.2244
Tucking Tools
High Quality Tools used for tucking headlining, upholstery and roof cover edges around windows, above doors and other hard to reach places.
OSB/747
1-1/2” Wide Rigid Blade
TOOL/STUFFING 282U 3/4” Wide Bent Blade
*Must Round Edges*
TOOL/STUFFING 2S 1-1/4” Wide Straight Blade
*Must Round Edges*
TOOL/STUFFING 416B 1-5/8” Wide Bent Blade
*Must Round Edges*
TOOL/STUFFING 2BE 1-1/8” Wide Bent Blade
*Must Round Edges*
OSB/746
1-1/2” Wide Flexible Blade
B-D Company Section 9 - Page 34 303.744.1405 1.800.748.2244
Shears
High quality Wiss® brand shears available in wide blade, regular blade, or knife edge
blade. Made of the finest quality cutlery steel for precision cutting. Hot drop-forged
nickel-plated blades for durability and longevity. Patented SET-EASY pivot for smooth
and effortless cutting action. Regular Blade Length Cut
1-DS 8" 3"
20 10" 5"
22 12" 6"
Wide Blade Length Cut
20W 10" 5"
22W 12" 6"
Left Hand Length Cut
20LH 10" 5"
Knife Edge Length Cut
1225 10" 5"
1226 12" 6-1/2"
B-D Company Section 9 - Page 35 303.744.1405 1.800.748.2244
Shears
This assortment is hot drop forged and fully nickel plated with black enameled handles for durable long-term value. Many of these industrial scissors and shears feature Mundial's Stay-Set pivot assembly, which is uniquely engineered to allow the ride to be adjusted to fit one's own ergonomic needs.
Knife Edge Length Cut
314-8 8" 3"
490-9 9" 4-1/8"
498-10 10" 4-7/8"
490-12 12" 6"
498-12 12" 6-1/8"
Left Hand Length Cut
493-10 10" 5"
Regular Blade Length Cut
J-7S 7" 1.5"
B-D Company Section 9 - Page 36 303.744.1405 1.800.748.2244
Button Tufting Tools
This furniture button tufter is 12 inches long and makes the job of button tufting like the professionals, fast and easy. Just thread twine in the round hole in the clip, hook square hole on needle, push and withdraw needle and then tie the button in place. Comes with 24 clips.
Button Tufter - OSB/613
This mattress button tufter is 12 inches long. Thread button on cord and cut to length. Push needle through mattress until cord ends come through. Pull out needle. Repeat on all buttons. Then turn over mattress and tie.
Mattress Button Tufter -
OSB/414
After threading this needle and loading the end with a clasp the needle can be smoothly pushed into the upholstery to maximum depth. The clasp is easily released by the injec-tion action of the handle and the needle removes without snagging leaving the clasp and thread safely anchored inside the work. Sold with 20 clasps.
Tufting Needle - OSB/417
Made of superior quality white nylon. This has high tensile strength required for holding
buttons in place. Available in 1/2lb spools.
Nylon Tufting Twine-
OSB/4700
B-D Company Section 9 - Page 37 303.744.1405 1.800.748.2244
Auto Trim Work Tools
This door handle clip remover is a specialty tool that can reach and engage the retaining clip which holds the door and window handles for faster and easier removal. No sharp edges to damage upholstery.
Door Handle Remover-
OSB/758
This simple tool is used for hooking and removing moldings and fascia panels, etc. It is of high quality and nickel plated. The perfect tool for auto trim work .
Molding Clip Tool-
OSB/757
This clover tool installs and removes the plastic clips which hold molding strips. Just press down and slide clip on or off. Helps avoid scratches on new finishes or injury to worker’s hand. A useful tool designed to save time and money.
Molding Clip Tool-
OSB/97
Removes the plastic trim pad fasteners used on cars. Does not damage trim pad or fasteners, they can be fully reused. The tool reaches under the trim panel and pries against hidden surfaces without breakage or scratching paint. Works equally as well on metal trim pad fasteners.
Trim Pad Remover-
OSB/760
Limited to Stock
The right tool for removing clips and retainers quickly and easily. Simply seat the tool on the shaft of the fastener and squeeze the handles together. Made of high carbon steel and heat treated for strength. Zinc plated with vinyl molded handle grips.
Door Panel Clip Tool -
AUV/15301
B-D Company Section 9 - Page 38 303.744.1405 1.800.748.2244
Glass Related Tools
The general purpose filler strip tool is made from all steel. It is specifically designed for sealing two-piece rubber weather stripping. The eye of the tool threads locking strip into the groove as the heel presses it into the channel. Accommodates locking strips up to 7/16 inch (11.1 millimeter) in size.
Locking Strip Tool-
WEA/201-1018
A practical tool for placing trim retainer clips over headed studs welded around the body window shields and rear window openings. This tool reduces the risk of chips and scratches to glass windows put in by make-shift tools. This tool is specifically designed to fit trim clips over the studs and virtually eliminates glass breakage. It also dispenses with the need to remove rubber-like sealant surrounding the studs.
Glass Retainer Clip Installer -
OSB/99
Limited to Stock
This tool was designed for use with the wide lock strips. The tool is constructed of stainless steel to provide years of service.
Locking Strip Tool-
WEA/201-1185
These suction cups provide the installer with the easiest way to handle windshields and backlights. They fit the contour of bent windshields and backlights to allow you to maneuver the glass into place, thus eliminating the possibility of breakage by hitting the glass.
Rubber Cups -
WEA/240-3555
B-D Company Section 9 - Page 39 303.744.1405 1.800.748.2244
Glass Related Tools
Sharpened to an extremely thin edge, this blade pierces the urethane bead with ease and pulls easier than other blades. Tempered spring steel has great edge holding ability but can be re-sharpened with a couple of strokes of a file.
Windshield Blade -
WEA/201-1005
This blade is made of tempered steel for extra strength and is the most popular. With a body width of 1/2” (13mm) and a blade length 7/8” (22mm).
Windshield Blade -
WEA/201-1010
This Teflon Coated Cold Knife Blade is specially sharpened, then coated with Teflon to produce a blade that is unsurpassed in performance when cutting through tough urethane. With a body width of 1/2” (13mm) and a blade length 7/8” (22mm).
Windshield Blade -
WEA/201-1013
This windshield knife is the perfect choice to accompany windshield super sharp blades.
It features scratch resistant and comfortable foam grips and single screw quick blade
change. The single screw also allows for easy adjustment to the blade length for all
applications. All Ultra Wiz Handles are shaped for comfort and gripping power, and will
hold any standard size 3/4 inch (19 millimeter) cold knife blade. This knife comes with
one standard one inch (25 millimeter) blade installed.
Windshield Knife -
WEA/201-1052
The 13 inch (330 millimeter) long cast aluminum handle on our knife gives you extra reach to cut hardened urethane down at the dash line. The round shape of our most popular long knife is easy to grip, and utility knife blades change out in just seconds. Tool length can be extended by adding a length of standard conduit pipe. Extra blades can be stored in the handle.
Windshield Knife -
WEA/210-1119 Replacement Blades -
WEA/210-4902
Compatible With Knife 201-1052
Body Width: 3/4" (19mm)
Blade Length: 1" (25mm)
Compatible With Knife 201-1052
Compatible With Knife 201-1052
B-D Company Section 9 - Page 40 303.744.1405 1.800.748.2244
Miscellaneous Tools
The smooth, square, and straight edges of this extremely accurate Straight Edge Ruler make measuring jobs easier and more exact. The 2" (51 mm) wide, flexible aluminum body is bend resistant and lies flat. The markings are in 1/8ths of an inch on one side and 1/16ths on the other. They are large and easy to read.
Straight Edge Ruler-
TOOL/RULER ALM 214-7
Panel Remover Kit-
VIC/11-50
Upholstery Starter Kit -
OSB/HB-1
Used to roll on vinyl roofs, gets all the air pockets out and used on interior carpeting to smooth it out. Round edge, single side design to get close to walls. Ball bearing race.
Vinyl and Carpet Roller -
OSB/399
Kit Contains: #255 Webbing Stretcher, #222-C Magnetic Tack Hammer, #201 Tack Claw, #504 - 10" Straight Single Round Point Needle, #501 1/2-3" Curved Round Point Needle, #501 1/2 - 6" Curved Round Point Needle, #190 - 3" Upholstery Pins, Instruction Booklet.
These special double-ended tools can be used for tucking or trim removal in various automotive, marine and upholstery applications. Excellent for use in removing automotive or marine door panels, dashboard trim, window installation and upholstery applications. Manufactured from impact-resistant delin plastic, which won't scratch or mark working surface.
B-D Company Section 9 - Page 41 303.744.1405 1.800.748.2244
Miscellaneous Tools
Work belt for tool holders and nail bags. Adjustable to fit 29” to 48” waists. Made of polypropylene webbing for strength and comfort with rust-proof, nickel-plated hardware. 2-1/4” wide.
Top Grain Cowhide Scissor Pouch
Flat acid brushes with a width of 1/2” and overall length of 5-3/4”. Tin handle for acid or adhesives.
Bending board for bending chrome moldings. 5 different forms.
B-D Company Section 9 - Page 42 303.744.1405 1.800.748.2244
Rivets & Accessories
Brazier Head Solid Aluminum Rivets
Part # Diameter Length Head Diameter Unit Pkg.
9643 3/16" 3/8" 15/32" 100
12528 3/16" 1/2" 15/32" 100
9647 1/4" 3/8" 5/8" 100
Dome Large Flange Countersunk
Pan'l Blind Rivets
Part # Rivet
Diameter Rivet Length Exc. Flange
Head Type Head
Diameter Grip Range Unit Pkg.
Steel Rivet - Steel Mandrel - Plated
8893 3/16" 7/16" Dome 3/8" 1/8"-1/4" 500
Aluminum Rivet - Aluminum Mandrel
8925 1/8" 3/8" Dome 1/4" 3/16"-1/4" 100
8928 1/8" 3/8" Countersunk 7/32" 3/16"-1/4" 100
8931 1/8" 3/8" Lg. Flange 3/8" 3/16"-1/4" 100
ABA-43 1/8" 5/16" Dome 1/4" 1/8"-3/16" 500
ABA-44 1/8" 3/8" Dome 1/4" 3/8"-1/2" 500
ABA-44-LF 1/8" 3/8" Lg. Flange 3/8" 3/8"-1/2" 500
ABA-46 1/8" 1/2" Dome 1/4" 5/16"-3/8" 500
ABA-48 1/8" 5/8" Dome 1/4" 3/16"-1/4 500
18728 5/32" 11/32" Dome 5/16" 1/8"-3/16" 100
5755 3/16" 9/32" Dome 3/8" 1/16"-1/8" 100
8301 3/16" 9/16" Dome 3/8" 1/4"-3/8" 100
8313 3/16" 9/16" Lg. Flange 5/8" 1/4"-3/8" 100
8312 3/16" 9/16" Lg. Flange 5/8" 1/4"-3/8" 500
19056 3/16" 11/16" Lg. Flange 5/8" 3/8"-1/2" 25
Stainless Steel Rivet - Stainless Steel Mandrel
19059 1/8" 21/64" Dome 1/4" 1/8-3/16" 50
19060 1/8" 25/64" Dome 1/4" 3/16-1/4" 50
19061 3/16" 11/16" Dome 3/8" 3/8"-1/2" 25
Rivet Guns for Blind Pan’l Rivets
Economy Rivet Gun With 3/32”, 1/8”, 5/32”, & 3/16” nose pieces. Overall length 10” Replacement accessories are not available.
11817 Rivet gun for setting 3/16” & 1/4” rivets. Use to install “Peel-Type” Rivets. Comes complete with 3/16” & 1/4” standard nose pieces plus a nose piece for 1/4” “Peel-Type” Rivets. 22” Long
B-D Company Section 9 - Page 43 303.744.1405 1.800.748.2244
"Peel-Type" Specialty Rivets
Part # Rivet
Diameter Grip Range
Flange Diameter
Type of Rivet Color Unit Pkg.
11486 1/4" 9/64"-3/16" 1/2" Aluminum Rivet / Steel Mandrel 25
11620 1/4" 1/32"-9/64" 1/2" Aluminum Rivet / Steel Mandrel 25
11621 1/4" 33/64"-19/32" 1/2" Aluminum Rivet / Steel Mandrel 10
11852 1/4" 5/64"-7/64" 1/2" - Recess Under Head
Aluminum Rivet / Steel Mandrel 25
12653 1/4" 3/32"-1/8" 1/2" Aluminum Rivet / Steel Mandrel Black 25
12655 1/4" 9/64"-3/16" 1/2" Aluminum Rivet / Steel Mandrel 25
12658 1/4" 11/16"-3/4" 1/2" Aluminum Rivet / Steel Mandrel 25
15684 1/4" 7/64"-1/64" 1/2" - Recess Under Head
Aluminum Rivet / Steel Mandrel 25
16838 1/4" 33/64"-19/32" 1/2" Aluminum Rivet / Steel Mandrel 25
18167 1/4" 3/32"-9/64" 3/4" Aluminum Rivet / Steel Mandrel Black 25
18396 1/4" 1/8"-5/16" 5/8" Aluminum Rivet / Steel Mandrel
(Zinc & Yellow) 25
19110 1/4" 1/32"-7/32" 1/2" Aluminum Rivet / Steel Mandrel (Zinc) 25
19414 3/16" 1/32"-1/4" 1/2" Aluminum Rivet / Steel Mandrel (Zinc) Black 25
19420 1/4" 13/64"-13/32" 5/8" Aluminum Rivet / Steel Mandrel (Zinc) 25
19456 1/4" 25/64"-21/32" 5/8" Aluminum Rivet / Steel Mandrel (Zinc) 15
19458 1/4" 1/8"-21/64" 3/4" Aluminum Rivet / Steel Mandrel Black 10
19461 1/4" 1/32"-7/32" 1/2 Aluminum Rivet / Steel Mandrel (Zinc) Black 15
19462 3/16" 1/32"-1/4" 1/2" Aluminum Rivet / Steel Mandrel (Zinc) 25
20402 1/4" 3/16"-1/4" 1/2" Aluminum Rivet / Steel Mandrel (Zinc) 25
Rivets & Accessories
More Specialty Rivets are Stocked!!
B-D Company Section 9 - Page 44 303.744.1405 1.800.748.2244
Rivets & Accessories
Nylon Blind Rivet
Part # Hole
Diameter Panel Range
(Grip) A B C D Unit Pkg.
13746 3/16" 1/16"-9/64" 1-7/8" 23/32" 3/32" 11-32" 25
13747 13/64" 1/16"-11/64" 1-7/8" 23/32" 1/8" 15/32" 25
13748 13/64" 1/8"-15/64" 1-7/8" 25/32" 1/16" 15/32" 25
13750 1/4" 5/32"-13/32" 2-3/16" 1-3/32" 3/32" 21/32" 25
13751 1/4" 5/32"-13/32" 2-3/16" 1-3/32" 3/32" 1/2" 25
13752 17/64" 3/32"-3/16" 1-7/8" 25/32" 3/32" 1/2" 25
13753 17/64" 3/32"-3/16" 1-7/8" 25/32" 3/32" 23/32" 25
13754 13/64" 1/8"-3/16" 1-7/8" 25/32" 1/16" 15/32" 25
13755 13/64" 15/64"-25/64" 2" 1" 1/16" 15/32" 25
14004 15/64" 11/64"-11/32" 2-3/64" 1-1/8" 3/32" 1/2" 25
14012 1/4" 5/32"-13/32" 2" 1-1/8" 3/32" 11/16" 25
14023 15/64" 5/32"-5/16" 2-1/8" 1-5/32" 3/32" 5/8" 25
18108 1/4" 5/32"-3/8" 2-7/32" 1-1/8" 3/32" 11/16" 25
Rivet Guns for Nylon Rivets
14155 For use with nylon blind rivets. An economical tool that provides the extra long pulling stroke needed to set nylon (plastic) rivets. It features all steel construction and full-size vinyl coated handles for smooth, easy operation. Not for use with metal rivets. 9-1/2” Long
13756 For use with nylon blind rivets. A durable tool that sets all sizes with a single stroke. All steel construction. Not for use with metal rivets. 6-1/2” Long