harsh & hazardous receptacle solutions · harsh & hazardous receptacle solutions class i,...

HARSH & HAZARDOUS RECEPTACLE SOLUTIONS

Class I, Div. 1 & 2Class I, Div. 2; Type 4XZones 1 & 2

RECEPTACLES MINI-CATALOGScan QR Code withyour mobile device

EXPANDING RANGE OF HARSH & HAZARDOUS RECEPTACLE DEVICES

Ranging from 20A blade style to 200AMP pin & sleeve devices, Killark provides numerous and field proven solutions for safely supplying power to fixed and portable equipment in hostile environments.

Interchangeability with other manufacturers configurations provides user flexibility for real world applications. The range also has exclusive convenience features like breech-lock caps with "3rd Hand" notch.

Devices include plugs, receptacles, panel receptacles, and connectors to extend the reach of portable equipment. For personnel safety, ground fault protected receptacles, both portable and fixed, are available.

QUICK LOCATOR TO PRODUCTS IN THIS MINI-CATALOG

VersaMate®

Series VSQ-FSSwitched ReceptaclePage R13

VersaMate®

Series N4X30A Plug & ReceptaclePage R7

ACCEPTOR® Series UGRCConnectorsPage R19

VersaMate®


ACCEPTOR® Series UGRFGFI ProtectedPage R21

ACCEPTOR® Series UGRPPanel Mount ReceptaclesPage R20

VersaMate®


ACCEPTOR® Series UGFIGFCI ProtectedPage R22

ACCEPTOR® Series UGRBladed Type Plug & ReceptaclePage R17

VersaMate®


ACCEPTOR® Series UGRSSquare ReceptaclesPage R21

VersaMate®

Series VSQSwitched ReceptaclePage R12

Installation AccessoriesPage R23

Receptacle Product Range From Killark - Back Cover

VersaMate®

Series VBQBreaker ProtectedPage R14

VersaMate®


NEW!

NEW!

Quick Wiring Plug

NEW VERSAMATE ® RECEPTACLES

KILLARK VERSAMATE® RECEPTACLES

R4

INTRODUCTION

Plugs:Octagonal style (Patented) for a firm and sure grip when connecting or disconnecting is fea-tured on both plug and cable connector bodies. Insulators have high mechanical and dielectric strength and “Low Arc Tracking.” “Increased Safety” type box terminals with gripper ribs securely clamp around conductors. Funneled conductor entry chambers lead all properly stripped conductors into terminals simultaneously. NEMA 4X rating when inserted into VersaMate receptacle and locking ring is tightened. Includes suitability for Type P marine cable.

Receptacles:Exclusive Patented “Breech-Lock” cap serves as either flip lid or screw cover. Receptacle is NEMA 3R with lid snapped shut or NEMA 4X with lid turned shut or when VersaMate plug is inserted and locking ring tightened. Patented notch in cap arm holds cap open for easy plug insertion or maintenance. Patented pin design uses slot-ted spring clip which avoids excessive wear while providing con-tinuous electrical pin to sleeve contact. VersaMate® receptacles use the same “Increased Safety” terminals and funnel design as VersaMate® plugs.

Cable Clamping Assembly:Plugs and cable connectors are supplied with an exclusive neo-prene “Onion Skin” peel-away type grommet. The VersaMate® cable clamp system captures cable with four grip points using only two tightening screws. Clamp guide assembly provides a firm fit over a wide range of cable diameters. Non-removable set screws prevent clamp guide assembly from backing out. Clamps have smooth contoured shoulder design to prevent snags or damage when moving equipment.

Back Boxes:VersaMate back boxes come in a variety of mounting styles. Exclusive “blind” recep-tacle mounting holes prevent moisture from entering box via thread cavities. Boxes come with a green grounding screw.

THE FIRST NEMA 4X RATED LINE OF METALLIC PLUGS & RECEPTACLES.

VersaMate® metallic pin & sleeve plugs & receptacles are designed for heavy duty industrial use. These devices sup-ply power to both fixed and portable electrical equipment including pumps, generators, welders, vacuums, blowers and similar apparatus. Suitable for indoor or outdoor use. Applications include the wet, cold, hosedown, hazardous or corrosive areas in such industrial applications as: • Pulp & Paper Mills • Breweries• Electrical Power Plants • Refineries• Petrochemical Plants • Chemical Plants• Wastewater Treatment • Grain Facilities • Marine, Docks, Ports • Textile Manufacturing• Construction Sites • Food Processing Facilities

Standard Materials:Copper-free aluminum construction with electrostatically applied epoxy/polyester finish. Contacts are brass with a patented beryllium copper spring tensioner. External screws are 316 stainless steel.

Features:The VersaMate product line includes 30, 60, 150j, 100 and 200 Amp plugs, receptacles and connectors with a full range of back boxes. Popular options include reverse service and polarization. The VersaMate line is FULLY INTERCHANGEABLEj with UL1686 configured and listed devices such as Crouse-Hinds® Arktite® or Appleton® Powertite®. Standard location receptacle bolt hole patterns match competitive back boxes so users can upgrade to VersaMate without changing back boxes in instances where changing the conduit system is difficult.

600 VAC/250VDC; 50-400 HertzNEMA 3, 4, 4XClass I, Div. 1 & 2, Groups B,C,D; NEMA 7 B,C,DkClass l, Zones 1 & 2, llB+H2, llAkClass ll, Div. 1 & 2, Groups F & G;NEMA 9 F,GkClass lllk

jVersaMate® components are UL classified and intermateable with other UL 1686-C1 configured devices (when installed in accordance with instructions furnished with device). Assemblies containing components from other manu-facturers would have the NEMA type rating of the lowest rated device. 150A models UL intermateable w/Appleton® Powertite® only.

kSee product pages for specific ratings.Arktite® is a registered trademark of Crouse-Hinds®.

Powertite® is a registered trademark of Appleton®.

VSQ VBQVR/VP

NEWALLEN/SLOTTERMINALS

FEATURES-SPECIFICATIONS

KILLARK RECEPTACLES


WWW.HUBBELL-KILLARK.COM R5

FEATURES/COMPARISONS

New Allen/slot terminal screws do not contact or machine conductor. Allows higher torque values typical in the oil industry.

VersaMate original Phillips/slot “Increased Safety” type terminals reduce connection fatigue. Screws do not contact or machine conduc-tor and are under spring tension to reduce loosening and pullout due to vibration.

Conventional screw type terminals. Screws“machine” (grind or fray) conductor. Screws are not under tension and more easily loos-en from heating and cooling cycles or from vibration. Screws can fall out (and be lost) during initial ship-ment - requires reassembly.

“Breech-Lock” design serves as both flip lid or screw cover style. Special notch in lid arm holds cover open to ease plug insertion or maintenance.

Conventional caps: user must choose between flip lid’s convenience or screw cover’s better sealing capa-bilities. Broken chains can mean lost covers.

Multiple gaskets require trial & error sizing to be sure of best fit and seal.

*Slip pencil or screwdriver into notch.

TERMINALS

GASKET

ALLEN/SLOTTERMINALS

• Exclusive Onion-Skin Gasket - Perfect Cable Fit• Exclusive 4-Point Cable Grip - Uses only 2 Recessed Screws• Exclusive Breech-Lock Cap - Flip or Screw-On - Notch to hold open

NEW!KILLARK BRAND

• First NEMA 4X - Still the BEST!

• Exclusive interior gasketing

• Exclusive Terminal Designs - No conductor machining - Allen or Phillips types

OTHER BRANDS

CAP

REVERSE SERVICE: S39Add suffix S39 for factory Reverse Service of recep-tacles, plugs or connectors. Receptacles or connectors are assembled with plug interiors while plugs are assembled with receptacle interiors. For applications where the plug is energized (i.e. from a genera-tor) to feed a non-energized receptacle. Prevents easy contact with energized ex-posed pins. This conversion can be performed in the field with a complementary plug and receptacle (30A to 150A devices shown on pages R7-R10). 200A Amp devices shown on page PR7 are a factory-only option. Reverse Service is not for hazardous locations.

POLARIZED OPTION: S37Add suffix S37 for special polarity.Can prevent connection between mismatched voltages or frequencies in areas where devices of the same amperage, poles and grounding style are used. Receptacle or connector interiors are rotated 22-1/2° to the right; plug is rotated oppo-site to match. This is a factory only option.

Standard S37 Option

Exclusive “Onion Skin” style gasket assures a tight seal around cable. Skin layers are removed from a single gasket to adjust for various cable diam-eters.


R6

EXCLUSIVE FEATURES/GROUNDING

EXCLUSIVE FEATURES & GROUNDING METHODSPatented Exclusive “Breech-Lock” cap serves as either flip lid or screw cover

PatentedSpecial notch is designed to hold cap open for easy field service or plug insertion with two free hands

Custom pin design using slotted spring clip to provide superior contact and reliability

Exclusive neoprene “Onion Skin” peel-away type gasket for the ultimate in sealing a variety of cable sizes

The VersaMate® Cable clamp system captures cable with four grip points using only two tightening screws. Provides secure grip without damaging the cable insulation

Smooth shoulder contour prevents snags & hang ups

Funneled wiring chamber design for fast and accurate conductor insertion to speed assembly. All wires can be inserted at one time

Patented Body style with octagonal shape for easy grip

P

P

Style I

In a Style I plug, the cable’s ground conductor is bonded to the plug housing by means of solderless connector. The receptacle is grounded by being part of a grounded conduit system. Upon insertion, detent springs in the receptacle housing contact and ground the plug housing before current carrying poles. All poles are current carrying.

GROUNDING: To minimize the danger of electrical shock when utiliz-ing portable equipment, the National Electrical Code requires exposed metal parts be grounded if operated at more than 150 volts to ground. The VersaMate® plug & receptacle system is available in two ground-ing styles. Please note Style I and II devices cannot be intermated.

Style II

In a Style II plug, the cable’s ground conductor is bonded to the extra grounding pole and to the plug housing via a bonding jumper. The receptacle has a matching grounding pole connected to the sys-tem ground conductor which is further tied to the grounded conduit system via a bonding jumper. Upon insertion, detent springs in the receptacle housing contact and ground the plug housing; then the extra long ground pole connects before the cur-rent carrying poles engage. The Style II ground pole makes first and breaks last.

3W4P Illustrated

3W3P Illustrated

Denotes Patented Feature

Unique VersaMate® Feature The VersaMate Line is designed for the industrial customer based on engineering and user surveys

P

Exclusive O-ring seals

Exclusive O-ring seals

• NEMA 3R Rating: When receptacle cap is snapped shut

• NEMA 4X Rating: When receptacle cap is turned shut or with VersaMate® plug inserted and ring tightened

Allen/Slot type box terminals provide secrue clamping of conductors (200A Version is Patented)

P

Allen/Slot type box terminals provide secrue clamping of conductors (200A Version is Patented)

KILLARK RECEPTACLES



30A SELECTION IN FORMATION

30 amp 2

• 30 Amp 600VAC/250VDC; 50-400 Hertz NEMA 3, 4, 4Xj• PLUGS ONLYk: Class I, Div. 1 & 2, Groups B,C,D; NEMA 7 B,C,D Class l, Zones 1 & 2, llB+H2, llA Class ll, Div. 1 & 2, Groups F & G; NEMA 9 F,G; Class lll

C D ReceptacleEConnector

F i l e No . E10757 Wire Range Regular Stranding: #10 - #6 original style or “AT” type (Includes Type P marine) Extra flex: #10 - #8 original style or “AT” type

Plug

Original or AT Terminals.See R5 for more information

Certified File No. LR111846

3 0 A M P R E C E P T A C L E S & B A C K B O X E S

CATALOG NUMBER

*See page R5 for more information on these options.

3116

2316

314223

32

31332

31332 223

32

Plug

Connector

Receptacle

Back Box Dimensions

GROUND STYLE

Sty l e I

S t y l e I I

2W2P

3W3P

4W4P

2W3P

3W4P

VR321E2VR331E2VR341E2VR332E2VR342E2VRE23

VR321C2VR331C2VR341C2VR332C2VR342C2

VRC23

VR321D2VR331D2VR341D2VR332D2VR342D2VRD23

VR321

VR331

VR341

VR332

VR342

–

CIRCUIT El TYPE ORIG. AT

Cl TYPE ORIG. AT

DlTYPE ORIG. AT

RECEPTACLE ONLY ORIG. AT

Splice box onlyl

l30 Amp Back Boxes are available in 1/2”, 3/4” and 1” conduit sizes. Size listed for 3/4”. For other available sizes, change the BOLD “2” in either the assembly or box only number to: 1=1/2”, 2=3/4”, 3=1”. Assembly catalog numbers are listed for ease of ordering or specification and devices are shipped as compo-nents.

Sty l e I

S t y l e I I

2W2P

3W3P

4W4P

2W3P

3W4P

.55 - 1.20 IN

.55 - 1.20 IN

.55 - 1.20 IN

.55 - 1.20 IN

.55 - 1.20 IN

VP3275

VP3375

VP3475

VP3385

VP3485

GROUND STYLE CIRCUIT GROMMET

RANGE PLUG ORIG. AT

VPR3255

VPR3355

VPR3455

VPR3365

VPR3465

CONNECTOR ORIG. AT

VRD

VRC

VRE

jComponents are intermateable & UL classified with other UL1686 config ured devices (when installed in accordance with instructions furnished with device). Assemblies containing components from other manufactur ers would have the NEMA type rating of the lowest rated device.kPlugs are hazardous suitable when mated with properly rated receptacles configured to use UL1686 type plugs, such as VersaMate VSQ/VBQ.– Note, 2, 3 & 4 pole device dimensions are the same.

M O D I F I C A T I O N S *

Reverse service for receptacles, plugs & connectors

Polarizat ion for receptacles, plugs & connectors

S39

S37

CATALOG NUMBER DESCRIPTION

CATALOG NUMBER

VersaMate® clamps provide a firm fit for one plug (or con-nector) over a wide range of cable diameters (competitors often need two – requiring additional sizing decisions).

VP3022

VP3033

VP3044

VP3023

VP3034

VPR3022

VPR3033

VPR3044

VPR3023

VPR3034

VR3022E2VR3033E2VR3044E2VR3023E2VR3034E2

VRE23


VRC23

VR3022

VR3033

VR3044

VR3023

VR3034

–

VR3022D2VR3033D2VR3044D2VR3023D2VR3034D2

VRD23


3 0 A M P P L U G S & C O N N E C T O R S

RETURN to

Index


R8

60A SELECTION INFORMATION

6 0 A M P P L U G S & C O N N E C T O R S


C D ReceptacleEConnector


Plug



Receptacle

Plug

Connector

Back Box Dimensions

jComponents are intermateable & UL classified with other UL1686 configured devices (when installed in accordance with instructions furnished with device). Assemblies containing components from other manufacturers would have the NEMA type rating of the lowest rated device.kPlugs are hazardous suitable when mated with properly rated receptacles configured to use UL1686 type plugs, such as VersaMate VSQ/VBQ.mDimensions in ( ) are 3 pole devices; balance are 4 pole.

l60 Amp Back Boxes are available in 1”, 1-1/4” and 1-1/2” conduit sizes. Size listed above is 1-1/4”. For other available sizes, change the BOLD “4” in either the assembly or box only number as follows: 3=1”, 4=1-1/4”, 5=1-1/2”. Assembly catalog numbers are listed for ease of ordering or specification and devices are shipped as components. Note: 60 Amp receptacles also fit 100 Amp mounting boxes – see Notem (100 Amp) on R5.

612

81316

31116 217

32 3(33

8) (214)

�

478

�

VRC

VRE

VRD



Reve rse se rv i ce fo r r ecep tac l es , p lugs & connec to rs

Po la r i z a t i on fo r r ecep tac l es , p lugs & connec to rs

S39

S37


VersaMate® clamps provide a firm fit for one plug (or con-nector) over a wide range of cable diameters (competitors often need two – requiring additional sizing decisions).

m

6 0 A M P R E C E P T A C L E S & B A C K B O X E S

GROUND STYLE

Sty l e I

S t y l e I I

2W2P

3W3P

4W4P

2W3P

3W4P

VR621E4VR631E4VR641E4VR632E4VR642E4VRE46


VRC46

VR621D4VR631D4VR641D4VR632D4VR642D4VRD46

VR621

VR631

VR641

VR632

VR642

–


Cl TYPE ORIG. AT

DlTYPE ORIG. AT


Splice box onlyl

CATALOG NUMBER


VRE46


VRC46

VR6022

VR6033

VR6044

VR6023

VR6034

–

VR6022D4VR6033D4VR6044D4VR6023D4VR6034D4

VRD46

CATALOG NUMBER

Sty l e I

S t y l e I I

2W2P

3W3P

4W4P

2W3P

3W4P

.65 - 1.50 IN

.65 - 1.50 IN

.65 - 1.50 IN

.65 - 1.50 IN

.65 - 1.50 IN

VP6275

VP6375

VP6475

VP6385

VP6485


RANGE PLUG ORIG. AT

VPR6255

VPR6355

VPR6455

VPR6365

VPR6465

CONNECTOR ORIG. AT

VP6022

VP6033

VP6044

VP6023

VP6034

VPR6022

VPR6033

VPR6044

VPR6023

VPR6034


KILLARK RECEPTACLES

RETURN to

Index






E C ReceptacleConnector


Plug



Back Box Dimensions

j Components are intermateable & UL classified with other UL1686 config-ured devices (when installed in accordance with instructions furnished with device). Assemblies containing components from other manufacturers would have the NEMA type rating of the lowest rated device.kPlugs hazardous suitable when mated with properly rated receptacles configured to use UL1686 type plugs, such as VersaMate VBQ.nDimensions in ( ) are 3 pole devices; balance are 4 pole.

* Angle adapter onlyl100 Amp Back Boxes are available in 1”, 1-1/4”, 1-1/2” & 2” conduit sizes. Size listed above is 1-1/2”. For other available sizes, change the BOLD “5” in either the assembly or box only number as follows:3=1”, 4=1-1/4”, 5=1-1/2”, 6=2”. Assembly catalog numbers are listed for ease of ordering or specification and devices are shipped as components.

m100 Amp Boxes & Adapters also fit 60 Amp receptacles. Adapter only can be used to attach receptacle at an angle to a standard sheet metal box.

�

� VJC





S39

S37


Receptacle

Plug

Connector

n

Feed through style shown

VersaMate® clamps provide a firm fit for one plug (or connector) over a wide range of cable diameters (competitors often need two – requir-ing additional sizing decisions).

CATALOG NUMBER

1 0 0 A M P P L U G S & C O N N E C T O R S

Sty l e I

S t y l e I I

2W2P

3W3P

4W4P

2W3P

3W4P

.88 - 1 .68 IN

.88 - 1 .68 IN

.88 - 1 .68 IN

.88 - 1 .68 IN

.88 - 1 .68 IN

VP10277

VP10377

VP10477

VP10387

VP10487


RANGE PLUG ORIG. AT

VPR10257

VPR10357

VPR10457

VPR10367

VPR10467

CONNECTOR ORIG. AT

VP1022

VP1033

VP1044

VP1023

VP1034

VPR1022

VPR1033

VPR1044

VPR1023

VPR1034

1 0 0 A M P R E C E P T A C L E S & B A C K B O X E S

GROUND STYLE

Sty l e I

S t y l e I I

2W2P

3W3P

4W4P

2W3P

3W4P


VJ57


VJC57

VR1021

VR1031

VR1041

VR1032

VR1042

VJA100*


ClTYPE ORIG. AT


Splice box onlyl

CATALOG NUMBER


VJ57

VR1022

VR1033

VR1044

VR1023

VR1034

VJA100*


VJC57

RETURN to

Index


R10



• 150 Amp 600VAC/250VDC; 50-400 Hertz NEMA 3, 4, 4X

E C Receptacle

F i l e No . E10757 Wire Range Building #2-2/0 (Includes Type P marine) Extra Flex #2-2/0

Pending

KILLARK RECEPTACLES

ALLENTERMINALSNEW!

ConnectorPlug

Back Box Dimensions

j Components are intermateable & UL classified with Appleton® Powertite® (when installed in accordance with instructions furnished with device). Assemblies containing components from other manufacturers would have the NEMA type rating of the lowest rated device.

* Angle adapter onlyl150 Amp Back Boxes are available in 1-1/4”, 1-1/2” & 2” conduit sizes. Size listed above is 2”. For other available sizes, change the BOLD “6” in either the assembly or box only number as follows: 4=1-1/4”, 5=1-1/2”, 6=2”. Assembly catalog numbers are listed for ease of ordering or specification and devices are shipped as components. m100/150 Amp Boxes & Adapters also fit 60 Amp receptacles. Adapter only can be used to attach receptacle at an angle to a standard sheet metal box.

�

� VJC



Reverse service for receptacles, plugs & connectors


S39

S37


Receptacle

Plug

ConnectorFeed through style shown

VersaMate® clamps provide a firm fit for one plug (or connector) over a wide range of cable diameters (competitors often need two – requir-ing additional sizing decisions).

CATALOG NUMBER


4W4P

3W4P

Sty l e I

S t y l e I I S t y l e I

S t y l e I I

. 88 - 1 .91 IN

.88 - 1 .91 INVPA15044

VPA15034


RANGE PLUG

VCA15044

VCA15034

CONNECTOR


GROUND STYLE

4W4P

3W4P

VRA15044E6VRA15034E6

VJ67

VRA15044C6VRA15034C6

VJC67

VRA15044

VRA15034

VJA100*

CIRCUITE TYPE C TYPE RECEPTACLE

ONLY

Sp l i ce box on ly w /adap te rlm

CATALOG NUMBER

RETURN to

Index





• 200 Amp 600VAC/250VDC; 50-400 Hertz NEMA 3, 4, 4Xj

E C ReceptacleConnector

File No. E10757

Wire Range Regular Stranding: #1 - 250 (Includes Type P marine Extra flex: #1 - 250 (.653 max conductor diameter) Certified File No. LR111846

Plug

ALLENTERMINALS

Receptacle

Connector

Back Box Dimensions

Sty l e I

S t y l e I I

3W3P

4W4P

2W3P

3W4P

1 .0 - 2 .5 IN

1 .0 - 2 .5 IN

1 .0 - 2 .5 IN

1 .0 - 2 .5 IN

VP203512

VP204513

VP203612

VP204612


RANGE PLUG CATALOG NUMBER

VPR203112

VPR204113

VPR203212

VPR204212

CONNECTOR

j Components are intermateable & UL classified with Appleton® Powertite® or Crouse-Hinds® Arktite® devices (when installed in accordance with instructions furnished with device. Assemblies con taining components from other manufacturers would have the NEMA type rating of the lowest rated device.

m Dimensions in ( ) are 3 pole devices; balance are 4 pole.

n 200A 3W4P Reverse Service configured “W” Series and VersaMate® are not intermateable. However, the VersaMate VR20422-S39 receptacle ships with instructions to permanently convert for use with existing PW-6402X SU39 plugs. Factory only configured plugs to fit old RW64C- SU39 receptacles may be ordered as VP-PW64026 SU39.

200 Amp Back Boxes are available in dead-end sizes 1-1/2”, 2” & 2-1/2” conduit sizes. Dead-end box shown is 2”. For other available dead-end box sizes, change the BOLD “6” in either the dead-end assembly or box only number as follows: 5=1-1/2”, 6=2”, 7=2-1/2”. Feed through boxes are available in 2-1/2”; use “R” series adapters as required for smaller sizes (sold separately). Assembly catalog numbers are listed for ease of ordering or specification and devices are shipped as components.

Adapter only can be used to attach receptacle at an angle to a standard sheet metal box.

NOTE: 200A VersaMate receptacle lids secure with wingnuts for N4X environ-ments when not in use. VersaMate plugs secure with wingnuts and/or lock-ring collar. This exclusive dual method allows retention of competi-tive plugs that use either wingnuts or a lock-ring collar.

VJC




Po la r i z a t i on fo r r ecep tac l es , p lugs & connec to rs S39n

S37



GROUND STYLE

Sty l e I

S t y l e I I

3W3P

4W4P

2W3P

3W4P

VR20312E6VR20412E6VR20322E6VR20422E6

VJ68

VR20312C7VR20412C7VR20322C7VR20422C7

VJC78

VR20312

VR20412

VR20322

VR20422

Ang le adap te ron ly VJA200

CIRCUIT EkTYPE

CkTYPE

RECEPTACLE ONLY

Sp l i ce box on ly w /adap te rkl

CATALOG NUMBER

VersaMate®

clamps provide a firm fit for one plug (or connector) over a wide range of cable diameters (competitors often need two – requir-ing additional sizing decisions).

Plug

k

l

m


RETURN to

Index

V S Q & V W S Q R E C E P T A C L E S


KILLARK RECEPTACLESR12

VSQ SWITCHED RECEPTACLES

• VSQ Hazardous Location Ratings Class I, Div. 1 & 2, Groups B,C,D Class I, Zones I & 2, Groups IIB+H2, IIA Class II, Div. 1 & 2, Groups F & G Class lll NEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

VersaMate VSQ & VWSQ Receptacles use VersaMate Style II plugs found on pages PR6 & PR7 and are compatible with appropriately configured Crouse-Hinds® Arktite® or Appleton® Powertite® plugs (when installed in accordance with instructions fur-nished with device)

Arktite® is a registered trademark of Crouse-Hinds®.


Features• N4X with receptacle lid turned shut or

with plug locking ring tightened • Copper-free aluminum construction

with electrostatically applied polyes-ter/epoxy finish. Handle mechanism is chemical resistant Valox®

(TM General Electric).

• Compact size and footprint• Plug Interlock Mechanism for Dead-

front construction. Switch cannot be turned “ON” without fully inserted plug. Plug cannot be removed with switch in “ON” position

• Plug held in place when switch is “Off” for convenience. Pull operated release mechanism. Plug and wiring do not have to be twisted or held to operate switch

• Factory Wired Receptacle; easy to wire line side of switch

• Easily visible “On-Off” indicator handle

• “Off” position is padlockable for maintenance safety

HORSEPOWER 120 240 480 600RATINGS (VAC)j

1Ø 2 5 10 15

3Ø 3 7.5 15 20

1Ø – 10 15 20

3Ø – 10 25 30

30A

60A

NOTES: VSQ/VWSQ 30 Amp models come standard with 1” drilled and tapped conduit openings top and bottom plus two 1” x 3/4” reducers and one 3/4” close-up plug for maximum flexibility.

60 amp models come with 1-1/2” openings top and bottom and one 1-1/2” close-up plug.

VSQ & VWSQ Receptacle covers are NOT interchangeable.

jRefers to internal switch only.

CATALOG NUMBERAMPS CIRCUIT

*See page R5 for more information on this option


Po la r i z a t i on fo r r ecep tac l es , p lugs

S37


F i l e No . LR14667

F i l e No . E216488

• VWSQ for Wet & Corrosive Locations NEMA 3, 4, 4X

Wire Range30 Amp Regu la r S t r and ing Max #1060 Amp Regu la r S t r and ing Max #4

Dimensions shown are in inches for 30 AMP: 60 Amp dimensions in ( ). NOTES: Devices have adjustable ductile lugs (vertical or side) for attachment to uneven surfaces. Ordinary twist type wire connectors are used for final connections on 30A, 60A devices have terminal blocks.

Dimensions

VSQ

VWSQ


• Auxiliary Contact (late-make early-break) contact rated 10 Amp, 1/3 HP at 125/250 VAC. Can be used for operating pilot lights or starter coils (standard model only)

• Feed-through construction• Horsepower Rated • Internal switch horsepower rated as “motor disconnect”

VSQ HAZARDOUS VWSQ N4X ONLY VERSAMATE PLUG

30

2W3P VSQ3023 VWSQ3023 VP3385

3W4P VSQ3034 VWSQ3034 VP3485

60

2W3P VSQ6023 VWSQ6023 VP6385

3W4P VSQ6034 VWSQ6034 VP6485

RETURN to

Index

FACTORY SEALED SOLUTION



VSQ -FS FACTORY SEALED

Class I, Div. 1 & 2, Groups B,C,DClass I, Zones I & 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F & G Class lllNEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

Dimensions shown are in inches for 30 AMP. 60 AMP Dimensions in ( ).

Features – same as VSQj plus:• Factory Sealed Construction elimi-

nates need for conduit sealing at the device

• Saves Installation Time & Labor – facilitates rework

• Switch has factory wired line and load terminals. Load terminals feed sealed receptacle as in a standard VSQ. Line wiring is passed from the sealed compartment into the wiring chamber

• Receptacles may be loosened from black box and turned 180 degrees to adjust for top or bottom feed.

• Ordinary twist type wire connec-tors are used for final connections on 30A. 60A devices have terminal blocks

NOTES: VSQ-FS 30 Amp models come standard with one 1” drilled and tapped conduit open-ings into the wiring chamber plus one 1” x 3/4” reducer.

60 amp models come with one 1” opening. jVSQ-FS models do not have auxiliary contacts.

VSQ-FS VERSAMATE HAZARDOUS PLUG

30 2W3P VSQ3023FS VP3385

30 3W4P VSQ3034FS VP3485

60 2W3P VSQ6023FS VP6385

60 3W4P VSQ6034FS VP6485

V S Q - F S R E C E P T A C L E S

Dimensions

*See page R5 for more information on this option.


Polar iza t ion for receptac les & plugs S37


CATALOG NUMBERAMPS CIRCUIT

Cer t i f i ed F i l e No . LR14667

Wire Range30 Amp Regu la r S t r and ing Max #1060 Amp Regu la r S t r and ing Max #4


EXCLUSIVE

RETURN to

Index



VBQ BREAKER PROTECTED

VersaMate VBQ Receptacles use VersaMate Style II plugs found on 30, 60 and 100 amp pages and are compatible with appropriately configured Crouse-Hinds® Arktite® or Appleton® Powertite® plugs (when installed in accordance with instruc-tions furnished with device).

Arktite® is a registered trademark of Crouse-Hinds®.


FeaturesReceptacle:• N4X with receptacle lid turned shut

or with plug locking ring tightened• Plug held in place when switch is

“Off” for convenience. Pull button operated release mechanism. Plug does not have to be twisted to oper-ate switch

• Dead-front construction when recep-tacle is off. Switch cannot be turned “ON” without fully inserted plug. Plug cannot be removed with switch in “ON” position

• Wire Connections do not bend when opening and closing door – minimizes loosening during installation or maintenance procedures

• For ground fault option, contact factory

Dimensions

Enclosure:• Spacious wiring room. Meets the

latest NEC wire bending require-ments for circuit breaker enclosures

• Ductile Mounting Lugs to adjust to uneven surfaces

• Copper-free construction with 316 grade Stainless Steel External Hardware

• Quick Release Cover Bolts with Triple Leads – only 3-1/2 turns to disengage

• Recessed Flange Notches – Allows easier cover opening with prying instrument without flange damage

• Electrostatically applied polyester/epoxy finish

• Visible “ON” external Breaker Handle has provisions for locking “ON” or “OFF” with up to three Padlocks

• Internal Lock-Off provision for main-tenance when no hazardous materi-als are present

3

3

334

�12

Replacement Parts:• Enclosure gasket VBQ-535 • External handle kit CBHK-100H

See instruction sheet included with device for other available replace-ment parts.


F i l e No . E184637

Receptacle assembly is field replaceable for maintenance.

Ordering information listed in the instruction sheets provided with the product.


RETURN to

Index

SQUARE D SQUARE D CUTLER-HAMMER CUTLER-HAMMER VERSAMATE FAL (480 VAC MAX.) FHL (600 VAC MAX.) EHD (480 VAC MAX.) FD (600 VAC MAX.) PLUG 20 VBQ3023SN20 VBQ3023SH20 VBQ3023CN20 VBQ3023CH20 VP3385 30 VBQ3023SN30 VBQ3023SH30 VBQ3023CN30 VBQ3023CH30 VP3385 2W3P 40 VBQ3023SN40 VBQ3023SH40 VBQ3023CN40 VBQ3023CH40 VP3385 30 50 VBQ3023SN50 VBQ3023SH50 VBQ3023CN50 VBQ3023CH50 VP3385 20 VBQ3034SN20 VBQ3034SH20 VBQ3034CN20 VBQ3034CH20 VP3485 30 VBQ3034SN30 VBQ3034SH30 VBQ3034CN30 VBQ3034CH30 VP3485 3W4P 40 VBQ3034SN40 VBQ3034SH40 VBQ3034CN40 VBQ3034CH40 VP3485 50 VBQ3034SN50 VBQ3034SH50 VBQ3034CN50 VBQ3034CH50 VP3485 50 VBQ6023SN50 VBQ6023SH50 VBQ6023CN50 VBQ6023CH50 VP6385 60 VBQ6023SN60 VBQ6023SH60 VBQ6023CN60 VBQ6023CH60 VP6385 2W3P 70 VBQ6023SN70 VBQ6023SH70 VBQ6023CN70 VBQ6023CH70 VP6385 90 VBQ6023SN90 VBQ6023SH90 VBQ6023CN90 VBQ6023CH90 VP6385 100 VBQ6023SN100 VBQ6023SH100 VBQ6023CN100 VBQ6023CH100 VP6385 60 50 VBQ6034SN50 VBQ6034SH50 VBQ6034CN50 VBQ6034CH50 VP6485 60 VBQ6034SN60 VBQ6034SH60 VBQ6034CN60 VBQ6034CH60 VP6485 3W4P 70 VBQ6034SN70 VBQ6034SH70 VBQ6034CN70 VBQ6034CH70 VP6485 90 VBQ6034SN90 VBQ6034SH90 VBQ6034CN90 VBQ6034CH90 VP6485 100 VBQ6034SN100 VBQ6034SH100 VBQ6034CN100 VBQ6034CH100 VP6485 50 VBQ1023SN50 VBQ1023SH50 VBQ1023CN50 VBQ1023CH50 VP10387 70 VBQ1023SN70 VBQ1023SH70 VBQ1023CN70 VBQ1023CH70 VP10387 2W3P 90 VBQ1023SN90 VBQ1023SH90 VBQ1023CN90 VBQ1023CH90 VP10387 100 VBQ1023SN100 VBQ1023SH100 VBQ1023CN100 VBQ1023CH100 VP10387 100 50 VBQ1034SN50 VBQ1034SH50 VBQ1034CN50 VBQ1034CH50 VP10487 70 VBQ1034SN70 VBQ1034SH70 VBQ1034CN70 VBQ1034CH70 VP10487 3W4P 90 VBQ1034SN90 VBQ1034SH90 VBQ1034CN90 VBQ1034CH90 VP10487 100 VBQ1034SN100 VBQ1034SH100 VBQ1034CN100 VBQ1034CH100 VP10487



VBQ BREAKER PROTECTED

Internal Lock-Offprovision formaintenance whenno hazardousmaterials are present

Ci rcu i t B reake r Wi re Range

Squa re D To 30 Amp #14-4 cu . ; 35-100 Amp #14-1 /0 cu .

Cu t l e r -Hammer To 20 Amp #14-10 cu . ; 30-100 Amp #14-1 /0 cu .

Consult Breaker Manufacturer literature for Horsepower Ratings.

†DC ra t i ngs app ly t o subs tan t i a l l y non- induc t i ve c i r cu i t s .

CATALOG NUMBER

M O D I F I C A T I O N Sj

Polar i za t ion fo r recep tac les & p lugsDra in

Brea the r

Dra in and B rea the r (CSA Groups C & D)

S37

SU10

SU11

SU3


jSee page R5 and price sheet for more information on these options.

F i l e No . E184637

Class I, Div. 1 & 2, Groups B,C,DClass I, Zones I & 2, IIB+H2, IIAClass II, Div. 1 & 2, Groups F & G Class lllNEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)

Ci rcu i t B reake r 208/240 480 VAC 600 VAC 250 VDC†In t e r rup t ing Ra t ings VAC

Squa re D FAL 25 ,000 18 ,000 —— 10 ,000

Squa re D FHL 65 ,000 25 ,000 18 ,000 10 ,000

Cu t l e r -Hammer EHD 18 ,000 14 ,000 —— 10 ,000

Cu t l e r -Hammer FD 65 ,000 25 ,000 18 ,000 10 ,000

RECEPTACLE CIRCUIT BREAKER


V B Q R E C E P T A C L E S

Contact factory for VBQ with ground fault option

ACCEPTOR ® RECEPTACLES

EXCLUSIVE QUICK WIRING PLUG

Old style insulator requires miniture screwdriver

Single piece shell for fewer parts

Built-in wirestrip gauge

Wire guides enables easy conductor installation

Side tighting terminals use full sized #2 screwdriver (either flat or Phillips)

UGPQW Plug

Insulator fits one way only

Centered cable grip

KILLARK ACCEPTOR® RECEPTACLES


UGR/UGP BLADED RECEPTACLES


The ACCEPTOR® UGP/UGR Plug and Receptacle system, with its unique, patented design, is interchange-ablej with other NEMA bladed type explosion-proof and dust ignition proof devices. The series has been tested and classified for use with Crouse-Hinds® Ark-Gard®2 and Appleton® U-Line® plugs and receptacles in hazardous locations.j No w available in GFCI versions. See pages R21-R22 How The Acceptor System WorksACCEPTOR receptacles contain an integral switch which must be closed to energize the circuit. The design permits only an approved plug to be energized. To actuate the switch, the plug must be inserted and rotated clockwise approximately 45o. The plug will lock into this position preventing accidental disengagement. To remove, simply push in then turn the plug coun-terclockwise and pull straight out.Plugs and receptacles may be used where interchangeable bladed devices are needed in locations made hazard-ous by the presence of flammable gases or vapors, combustible dusts or easily ignitable fibers and flyings.Plug can serve to provide power for portable equipment used in both hazardous and non-hazardous areas.

Applications• Petroleum Refineries, Chemical Plants• Wet/Damp/Corrosive Areas• Grain Elevators/Feed Mills

Features• All external hardware is 316 stainless steel

to provide low maintenance and long life• Factory sealed chamber in UGR recep-

tacle contains switch’s arcing components• No additional external seals are required,

except in Group B applications

Class I, Div. 1 & 2, Groups Bk,C,DClass I, Zones 1 & 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F,GClass IIINEMA 3, 7 (B,C,D), 9 (F,G)

L is t ed F i l e No . E91049 and/o r E53660

Cer t i f i ed F i l e No . LR14667

• Receptacles are U.L. Listed as raintight. Proper sealing against moisture is assured

• Spring loaded receptacle cover closes when plug is removed to provide protection when not in use

• Copper-free aluminum (less than 4/10 of 1%) alloy resists corrosion

• Electrostatically applied and baked powder epoxy/polyester finish

PLUGACCEPTOR® plugs conform to NEMA configurations and can be used with standard receptacles in non-hazardous areas to maximize equipment utilization. The system’s “turn to engage” feature

1.51" 1.69"

2.55"

kPlugs Rated Group B when used with properly rated & installed receptacles. See next page.

1/4"

45/8"

3"

j Exact models classified for interchangeability are listed in the information sheet provided with the products. Ark-Gard® is a registered trademark of Crouse-Hinds®. U-Line® is a registered trademark of Appleton Electric Company®.

UGP-15231 UGP-15231QW

UGP-15232 UGP-15232QW

NEMA CONFIGURATION

locks in plug and can be used to pre-vent accidental disengagement of critical equipment. Plugs for use with type S, SO, ST or STO heavy duty cord.

15 AMP PLUGW/QUICK WIRING

15 AMP PLUG

CATALOG NUMBER

20 AMP PLUGW/QUICK WIRING

20 AMP PLUG

CATALOG NUMBER

UGP-20231 UGP-20231QW

UGP-20232 UGP-20232QW

NEMA CONFIGURATIONVOLTAGE

125VAC

250VAC

NEW!

UGPQW PlugUGR Receptacle

QWQuick Wiring Plug

• Single piece shell for fewer parts• Transparent wiring entrance holes for

easy conductor insertion• Screws tighten from side with “full sized”

screwdriver• Insulator fits "one way"• Centered cable grip

EXCLUSIVE QUICK WIRING PLUG

Single piece shell for fewer parts

QUICK WIRING

PLUG43/16"

4 5/8"

15/8"

60O

6"

RETURN to

Index



UGRC SELECTION INFORMATION

R E C E P T A C L E S A N D A S S E M B L I E Sm

—

1/2”

3/4”

1”

1 /2”

3 /4”

1”

—

1/2”

3 /4”

1”

1 /2”

3 /4”

1”

HUB SIZE

RECEPTACLE ONLY

DEAD END

FEED-THRU

RECEPTACLE ONLY

DEAD END

FEED-THRU

ENCLOSURESTYLE

NEMA RATING& CONFIGURATION

j Items in this column are suitable for Class I, Group B in addition to Class I, Groups C, D. Also suitable for Class I, Zone 1, Groups IIB+H2, IIA.k Seals must be installed within 6 inches of conduit opening.l Items in this column may also be used in Class I, Zone 1, Groups IIB, IIA.

Assembly numbers not rated for Group B are shipped as receptacle & back box components. m Refer to Killark catalog for additional SWB Series Back Box configurations.n Canada only configurationoCanadian Codes now allow “T” combination slots for 15A or 20A plugs. Check breaker and wire feed size for proper application ratings.NOTE: For replacement receptacle cover and hinge, order KIT-173.

2 POLE

3 WIRE

2 POLE

3 WIRE

—

1/2”

3 /4”

1”

1 /2”

3 /4”

1”

RECEPTACLE ONLY

DEAD END

FEED-THRU

2 POLE

3 WIRE

—

1/2”

3 /4”

1”

1 /2”

3 /4”

1”

RECEPTACLE ONLY

DEAD END

FEED-THRU

2 POLE

3 WIRE

20 Amp125 Volt

15 Amp125 Volt

5-20R

5-15R

15 Amp250 Volt

6-15R

20 Amp250 Volt

6-20R

UGRO-20231

UGR7-20231

UGR8-20231

UGR9-20231

UGR10-20231

UGR11-20231

UGR12-20231

UGROC-15231

UGR7C-15231

UGR8C-15231

UGR9C-15231

UGR10C-15231

UGR11C-15231

UGR12C-15231

UGRO-20232

UGR7-20232

UGR8-20232

UGR9-20232

UGR10-20232

UGR11-20232

UGR12-20232UGROC-15232

UGR7C-15232

UGR8C-15232

UGR9C-15232

UGR10C-15232

UGR11C-15232

UGR12C-15232

UGRO-20231

UGR1-20231

UGR2-20231

UGR3-20231

UGR4-20231

UGR5-20231

UGR6-20231

UGROC-15231

UGR1C-15231

UGR2C-15231

UGR3C-15231

UGR4C-15231

UGR5C-15231

UGR6C-15231

UGRO-20232

UGR1-20232

UGR2-20232

UGR3-20232

UGR4-20232

UGR5-20232

UGR6-20232UGROC-15232

UGR1C-15232

UGR2C-15232

UGR3C-15232

UGR4C-15232

UGR5C-15232

UGR6C-15232

—

UGRB1-20231

UGRB2-20231

UGRB3-20231

UGRB4-20231

UGRB5-20231

UGRB6-20231

—

UGRB1C-15231

UGRB2C-15231

UGRB3C-15231

UGRB4C-15231

UGRB5C-15231

UGRB6C-15231

—

UGRB1-20232

UGRB2-20232

UGRB3-20232

UGRB4-20232

UGRB5-20232

UGRB6-20232—

UGRB1C-15232

UGRB2C-15232

UGRB3C-15232

UGRB4C-15232

UGRB5C-15232

UGRB6C-15232

SINGLE GANGjkGROUPS B, C, D, F & G

SINGLE GANGlmGROUPS C, D, F, & G

DOUBLE GANGlmGROUPS C D, F, & G

SWB-1, 2, 3 SWB-4, 5, 6 Single Gang Double Gang

n

o

n

o




UGRC CONNECTORS


NEMA CONFIGURATION CATALOG NUMBER WEATHER RATING125V CONNECTOR CAP STYLE

250V CONNECTOR CAP STYLE

20 Amp125 Volt

2 POLE3 WIRE

20 Amp250 Volt

2 POLE3 WIRE

6-20R with T-slots

Breech-Lock with Notch Flip Type

5-20R with T-slots


Killark 250V Plugs20 Amp15 Amp

Killark 125V Plugs20 Amp15 Amp

UGRC-20231BUGRC-20231F

lUGP-20231QWUGP-15231QW

UGRC-20232BUGRC-20232F


N4X*N3**

N4X*N3**

Connector with Breech-Lock Cap “3rd Hand” Plug Operation

Class I, Div. 1 & 2, Groups B,C,DjClass I, Zones 1 & 2, Groups IIB+H2, IIAjClass II, Div. 1 & 2, Groups F,GkClass IIINEMA 3, 4X*

Cer t i f ied F i le No. LR14667

UGRC ConnectorBreech cap model shown, Flip cap model dimensions are

similar

CONNECTORSThe ACCEPTOR® UGRC Connector complements UGP/UGR Plugs and Receptacles, as well as Ground Fault Protected UGFI and UGRGF Models. Used with Acceptor plugs, connectors can extend the reach for hazardous location rated portable equipment such as hand lamps. Connectors eliminate the need for user created corded box mounted receptacles. UGRC Connectors are interchangeable and classified for use with other NEMA bladed type explosion-proof and dust ignition proof plugs, including Crouse-Hinds® Ark-Gard®2 and Appleton® ULine®. Features• Available with the exclusive Breech-Lock

Cap (see R5 for more info) - patented notch provides “3rd hand” plug operation (holds lid open while one hand operates plug, and other holds connector).

• Factory Sealed Construction • Suitable for 14 or 12 gauge SOOW or

similar cable • Copper-free aluminum (less than 4/10 of

1%) alloy resists corrosion • Electrostatically applied and baked pow-

der epoxy/polyester finish • Dead Front Construction with integral

switch - requires Hazardous Rated NEMA Bladed plug for operation

Ark-Gard® is a registered trademark of Crouse-Hinds® U-Line® is a registered trademark of Appleton Electric Company®

Industrial Applications• Petroleum Refineries • Chemical/Petrochemical Plants • Oil Rigs & Platforms • Wet/Corrosive Environments • Grain Elevators

Dimensions

j

k

Connector shown with Acceptor UGRP receptacle mounted in explosion proof Quantum® enclosure

8.25

2.883.69

*Breech cap models N4X with lid closed and turned, N3 When Plug inserted Hinge Up**Flip Lid models N3 with hinge in UP position with or without plugReplacement Cap and Hinge Kits: Breech KIT-173B, Flip KIT-173 jCSA certified Class I Div.I for Canada and/or other jurisditions accepting CSA.kCCSAUS Class II, Groups F & G for US and Canada.lRemove QW in catalog number for Standard Wiring type plug.

Flip Cap

Cer t i f ied F i le No. LR14667

UGP Plug

RETURN to

Index



UGRP PANEL RECEPTACLES


* UGRP Receptacles are available “Factory Installed” in the following series:Enclosures - Series EXB, B7E Distribution Equipment-Series D2L, B7L Lighting Panelboards* Contact factory for ordering information

Class I, Div. 1 & 2, Groups B,C,DjClass I, Zones 1 & 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F,GClass IIINEMA 3, 4X*

Cer t i f i ed F i l e No .

LR14667kC US

Typical InstallationBreech Cap Model

Typical CLI Div. Iapplication

Typical CLI Div. 2application2-3/8” K.O.

Breech Caps

Flip Lids

*Breech cap models N4X with lid closed and turned, N3 When Plug inserted Hinge Up **Flip Lid models N3 with hinge in UP position with or without plug ***See R17 for Plug NEMA Diagram and DimensionsReplacement Cap and Hinge Kits: Breech KIT-173B, Flip KIT-173jClass I Div.1 B,C,D in enclosures certified to 325 explosive PSI (2”-11½ NPSM threads). Class I Div. 2 in standard location enclosures using only non-arcing components.kcCSAus Certified for United States, Canada, and other jurisdictions accepting the mark.lRemove QW in catalog number for Standard Wiring type plug.

NEMA CONFIGURATION CATALOG NUMBER WEATHER RATING125V PANEL RECEPTACLE CAP STYLE

250V PANEL RECEPTACLE CAP STYLE

20 Amp125 Volt2 POLE3 WIRE

6-20R with T-slots


5-20R with T-slots


Killark 250V Plugs***20 Amp15 Amp


UGRP-20231BUGRP-20231F


UGRP-20232BUGRP-20232F


N4X*N3**

N4X*N3**20 Amp

250 Volt2 POLE3 WIRE

Flip Cap

Breech Cap model shown.Flip Cap model dimensions are similar

PANEL RECEPTACLES The ACCEPTOR® UGRP Panel Receptacle complements UGP/UGR Plugs and Receptacles, as well as Ground Fault Protected UGFI and UGRGF Models. Used with Acceptor plugs, panel recep-tacles provide local power for hazardous location rated portable equipment such as hand lamps. Units are suitable for Class I Div. 1 or Class I Div.2 depending on the enclosure type usedj. UGRP Panel Receptacles are inter-changeable and classified for use with other NEMA bladed type explosion-proof and dust ignition proof plugs, includ-ing Crouse-Hinds® Ark-Gard®2 and Appleton® ULine®.

Features• Available with the exclusive Breech-Lock

Cap (see R5 for more info) - patented notch provides “3rd hand” plug opera-tion (holds lid open while one hand operates plug, and other holds connector).

• Factory Sealed Construction • Copper-free aluminum (less than 4/10 of

1%) alloy resists corrosion • Electrostatically applied and baked

powder epoxy/polyester finish • Dead Front Construction with integral

switch - requires Hazardous Rated NEMA Bladed plug for operation

Ark-Gard® is a registered trademark of Crouse-Hinds® U-Line® is a registered trademark of Appleton Electric Company®

Industrial Applications• Petroleum Refineries • Chemical/Petrochemical Plants • Oil Rigs & Platforms • Wet/Corrosive Environments • Grain Elevators

Breech Lid

Dimensions4.50

3.692.94

RETURN to

Index

UGRS RECEPTACLE & BACKBOXESj



UGRS/UGRGF RECEPTACLES


UGRGFNEW!

NEMA CONFIGURATION CATALOG NUMBER125V SQUARE RECEPTACLE CAP STYLE

250V SQUARE RECEPTACLE CAP STYLE


6-20R with T-slots

Breech-Lock with Notch* Flip Lid Type**

5-20R with T-slots

Breech-Lock with Notch* Flip Lid Type**



UGRS-20231BUGRS-20231F

UGP-20231QWUGP-15231QW

UGRS-20232BUGRS-20232F

UGP-20232QWUGP-15232QW

*Breech cap models N4X with lid closed and turned, N3 When Plug inserted Hinge Up**Flip Lid models N3 with hinge in UP position with or without plug***See R17 for Plug NEMA Diagram and Dimensions


C D ReceptacleE

Flip Cap

Class I, Div. 2, Groups B,C,DClass I, Zone 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F,GClass IIINEMA 3, 4X

Pend ing

Pend ing

SQUARE RECEPTACLEUGRS Receptacles utilize VERSAMATE® 30A mounting boxes and are designed to provide "ROTATABLE" configurations enabling cover hinge location to be in most convenient position for application. May also be utilized with sheet metal enclosures.

Features• Factory Sealed • Test and Reset push buttons are provided on cover assembly, with optional pilot light availablej Unit should be tested monthly• Includes new GFCI to meet latest

UL943 GFCI standards revisions• Exterior gasket provides NEMA 3

weatherproof protection• Ground boss for grounding in the

splice box• Color coded wiring and stainless steel

cover bolts• Receptacle used is UGRO-20231.

See page PR23

Class I, Div. 1 & 2, Groups C,DClass l, Zones 1 & 2, Groups llB,llAClass lI, Div. 1 & 2, Groups F,GClass IIINEMA 3, 7(C,D) 9(F,G)

Cer t i f i ed LR11714

See f i l es fo r de ta i l s o r ca l l K i l l a rk .

jFor Red LED pi lot l ight ind icator of l ive

c i rcu i t , add “-PL” to cata log number.

Example - UGRGF107-PL.

GFI PROTECTED RECEPTACLE Utilizes FXS GFI and ACCEPTOR®

receptacle to interrupt a circuit, when a ground fault is detected on equipment which may be handled by personnel in hazardous locations.

Electrical RatingGFI units are rated at 20A, 120 VAC, 60Hz. Class A.4-6 miliamp trip settingTrip Time-UL Curve

20A, 125V,

2P, 3W

ENCLOSURESTYLEDead EndDead EndDead EndFeed ThruFeed ThruFeed Thru

HUBSIZE1/2”3/4”1”1/2”3/4”1”

CATALOGNUMBERUGRGF107UGRGF108UGRGF109UGRGF110UGRGF111UGRGF112

NEMA RATING &CONFIGURATION

E Type k C Type k D Type k RECEPT ONLY

20A 125V UGRS-20231BE2 UGRS-20231BC2 UGRS-20231BD2 UGRS-20231B

20A 250V UGRS-20232BE3 UGRS-20232BC3 UGRS-20232BD3 UGRS-20232B

j Receptacles listed are with Breech cap; for Flip Cover change B to F.k Boxes listed are for 3/4"; for 1/2" change last digit to 2, for 1" change last digit to 3.

Breech Cap model shown.Flip Cap model dimensions are similar

Dimensions

RETURN to

Index

G F C I R E C E P T A C L E A D A P T E R ( W / C O R D S E T )



UGFI GROUND FAULT PROTECTOR

NEW!2P 250V GFI

1/2” HUB UGFI202C3


1” HUB UGFI202C3



1” HUB UGFI152C3

The GFCI protected ACCEPTOR® is the solution to OSHA’s requirements for GFCI protection when using portable equipment in hazardous and wet loca-tions. For use with 125V, or125/250Vl 15 or 20 amp receptacles without GFCI protection, the Adapter Unit provides GFCI and circuit protection to connect-ed apparatus by simply being plugged into an existing receptacle.

The Hard-Wired Unit provides the same protection and is used directly as a GFCI protected device. Units are feed-through with one close-up plug.

L is t ed F i l e No . E91049k

Cer t i f i ed F i l e No . LR14667k

Typical Application with XHL Series Hand Lamp

7 3/86

6 1/8

7 7/8

Hard-Wired Unit

• Adapter Unit Class I, Div. 2, Groups B,C,D Class I, Zone 2, Groups IIB+H2, IIA Class II, Div. 1 & 2, Groups F,G Class III, Div. 1 & 2

• Hard-Wired Unit Class I, Div. 1 & 2, Groups B,C,D Class I, Zones 1 & 2, Groups IIB+ H2, IIA Class II, Div. 1 & 2, Groups F,G Class III, Div. 1 & 2

NEMA 3 ENCLOSURE TYPE(Adapter or Hard-Wired units)

Adapter Unit • No need to permanently alter existing

installations; Portable Unit can be temporarily hung using included strap near an existing receptacle wherever protection is required

• Factory Sealed Unit• Acceptor® plug and cord set included

with Adapter Unit. Cord is 36” Hard-Wired Unit • provides GFCI and circuit protection in

new installations, or as an upgrade or replacement for non-GFCI receptacles

• Factory Sealed, except Group BAdapter and Hard-Wired Unit• GFCI device also provides circuit

protection, for connected apparatus, against current overload and short circuits

• Acceptor® receptacles and plugs are intermateable with both Crouse-Hinds® Ark-Gard®2 and Appleton® U-Line® products

• Amber pilot light provides indication that the receptacle is energized.

• Units can be Padlocked OFF for main-tained safety

• Fully gasketed GFCI compartment prevents moisture from damaging electronic components

• Same high quality materials as the standard ACCEPTOR®

j Hard-Wired assemblies in Group B areas require sealing within 6” of enclosure.

k125VAC & 250 VAC devices are CCSAUS certified;125VAC devices are also UL Listed.

l 2P 250V units are for 2 “hot line” applications and include 2P 5mA GFI breakers. 2P Units are for 120/240V or 120/208Y Grounded Power Supply Systems ONLY. Do NOT use with Delta supply systems.

Ark-Gard® is a registered trademark of Crouse-Hinds® U-Line® is a registered trademark of Appleton Electric Company®.

Adapter Unit

UGFI GROUND FAULT PROTECTOR

5-20R

5-15R

6-20R

6-15R

20A

125V k

15A

125V k

1/2” HUB UGFI20C1

3/4” HUB UGFI20C2

1” HUB UGFI20C3

1/2” HUB UGFI15C1

3/4” HUB UGFI15C2

1” HUB UGFI15C3

5-20R

5-15R

6-20R

6-15R

20A

250V kl

15A

250Vkl

HARD WIRED (PERMANENTLY MOUNTED) GFCI RECEPTACLE

20A

125V k

15A

125V k

20A

250V kl

15A

250V kl

UGFI20AD

UGFI15AD

UGFI202AD

UGFI152AD


C US

RETURN to

Index

FITTINGS


INSTALLATION ACCESSORIES

DURALOY® 8 SERIES

Iron conduit bodies. Use with threaded rigid conduit - steel or aluminum.

STANDARD LOCATION FITTINGS

DURALOY® 7 SERIES

Aluminum or Iron conduit bodies. Use with threaded rigid conduit - steel or aluminum.

MC AND CMCA SERIES

Metal clad cable connectors. Use with jacketed metal clad cable types.

Z SERIES

Used to secure & seal cords entering enclosures or raceways.

K SERIES

Liquidtight connectors. Use with flex-ible metallic and Type B liquidtight flex-ible nonmetallic conduit.

PCC/ECC/RACC SERIES

Conduit clamps. Use with threaded rigid conduit - steel or aluminum.

O SERIES

Aluminum conduit bodies. Use with threaded rigid conduit - steel or aluminum.

DURALOY® 5 SERIES

Malleable Iron conduit bodies. Use with threaded rigid conduit - steel or aluminum.

STANDARD LOCATION CONNECTORS

GEB/GE/GR SERIES

Aluminum and Iron outlet bodies. Use with threaded rigid condyit - steel or aluminum.

ENY/EY/EYS/EYD SERIES

Sealing Fittings and materials. Use with threaded rigid condyit - steel or aluminum.

PLUG/CUP/AN SERIES

Threaded Insert Plugs and rigid conduit nipples. Use to close up a tapped hole or hub.

UNF/UNY SERIES

Expansion Conduit Unions. Use to provide for slight expansion and contraction of conduit runs.

GU/UN SERIES

Aluminum and Iron unions. Use with threaded rigid conduit - steel or aluminum.

X/XALB SERIES

Aluminum conduit bodies. Use with threaded rigid condyit - steel or aluminum.

HAZARDOUS LOCATION FITTINGS HAZARDOUS LOCATION FITTINGS

FF/MF/MM/BL/GUFS/Y & EYMF SERIES

Aluminum and Iron elbows. Use to change direction in rigid or IMC conduit systems, or to join conduit at angles.

R/RE/ADUP SERIES

Reducing bushings and adapters. Use to reduce trade size of a tapped hole or hub.

CTCA, MCX & CMCXA SERIES

Metal clad cable connectors. Use with jacketed metal clad cable types in hazardous areas

EKJ SERIES

Stainless steel flexible coupling. Use where movement or vibration requires a flexible connection.

ECFUF/EKJUF/ECF/EKT SERIES

Bronze flexigle couplings with and without female steel unions. Use where movement or vibration requires a flexible connection.

HAZARDOUS LOCATION CONNECTORS

For Full Product Information go to

www.hubbell-killark.com

RETURN to

Index

http://www.hubbell-killark.com

MCVAR 04-14

PLUGS AND RECEPTACLES RANGE FROM KILLARKSee catalog data for complete ratings, certifications and series features

RACO® BELL® KILLARK® HAWKE® CHALMIT® WIEGMANN® VNATAGE® VICTOR® TAYMAC®

ELECTRICAL SYSTEMSA DIVISION OF HUBBELL INCORPORATED (DELEWARE)

3902 M. L. KING Dr. St. Louis, MO 63113Tel. (314) 531-0460 Fax. (314) 531-7164www.hubbell-killark.com

DISTRIBUTED BY:

SERIES HIGHLIGHTS SUITABILITY

NEW!150A MODEL

VP/VR/VPRNEMA 4X

VSQ/VSQ-FS/VBQHAZARDOUS LOCATIONSINTERLOCKED

KR SERIESHAZARDOUS LOCATIONSDELAYED ACTION

UGP/UGRHAZARDOUS LOCATIONSBLADE STYLE

NEW!QW

QUICK WIRING PLUG

UGRC/UGRPHAZARDOUS LOCATIONS

UGRSHAZARDOUS LOCATIONS

UGRF/UGFIHAZARDOUS LOCATIONS

Plug Connector

UGFI Adapter Unit Class I, Div. 2, Groups B,C,D Class I, Zone 2, Groups IIB+H2, IIA Class II, Div. 1 & 2, Groups F,G Class III, Div. 1 & 2

UGRF Class I, Div. 1 & 2, Groups C,DClass l, Zones 1 & 2, Groups llB,llAClass lI, Div. 1 & 2, Groups F,GClass IIINEMA 3, 7(C,D) 9(F,G)

Class I, Div. 2, Groups B,C,DClass I, Zone 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F,GClass IIINEMA 3, 4X

Class I, Div. 1 & 2, Groups B,C,DClass I, Zones 1 & 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F,GClass IIINEMA 3, 4X*

Class I, Div. 1 & 2, Groups B,C,DClass I, Zones 1 & 2, Groups IIB+H2, IIAClass II, Div. 1 & 2, Groups F,GClass IIINEMA 3, 7 (B,C,D), 9 (F,G)


NEMA 3, 4, 4X, Receptacles

See product pages for plug ratings

• VSQ Hazardous or VWSQ (NEMA 4X only)• VSQ-FS is Factory Sealed (EXCLUSIVE)• VBQ Breaker Protected Interlocked Receptacle

Class I, Div. 1 & 2, GroupsC,DClass I, Zones I & 2, IIB, IIANEMA 7 (C,D)

• Heavy Duty Construction• Factory Sealed• Delayed Action Contacts

• 30, 60, 100, 150, 200 AMP Models• Allen/Slot Terminals• Interchangeability

• Interchangeable with other NEMA Bladed Explosion-proof Devices• Quick Wiring Plug for Easy Installation

• Used with Acceptor Plugs, Connectors & Panel Receptacles Extend Reach and Provide Local Access for Portable Equipment

• Square Receptacles Provide 'ROTATABLE' Configurations to Allow Cover Hinge to be in Convenient Location

• GFCI Devices Provide Circuit Protection for Con- nected Apparatus Against Overloads & Short Circuits• UGFI Available in Adapter & Hardwired Units

Flip Cap

NEW!

RETURN to

Index

http://www.hubbell-killark.com

harsh & hazardous receptacle solutions · harsh & hazardous receptacle solutions class i,...

Documents