HBA TRACKERQUICK START GUIDE

The HBA Tracker Occupancy and Light Level Logger records room occupancy, lighting, and daylight patterns for easy verification of savings potential in installing HBA occupancy sensors and daylight harvesting products. The lightweight sensor easily mounts to metal surfaces for easy set-up. The unit connects to a PC via USB cable (included) and the intuitive software includes a variety of reports customizable to the space.

INSTALLATION 1.) Remove the Tracker lens (see Fig. 1). 2.) Remove rear cover, connect included battery and replace cover. 3.) Download the software from http://www.hubbell-automation.com/products/hba_tracker under Programing Tools. Double click the setup.exe to begin the installation. Note: Tracker runs on Windows XP or Windows 7. It is not compatible with Windows 8.

9601 Dessau Road, Building One | Austin, TX 78754 Toll Free: 888-698-3242 | Fax: 512-450-1215 | www.hubbell-automation.com 1803C 09.04.2015

FEATURES• User setpoints for accurate reporting• Multiple reports available in PDF and Excel• Reusable magnetic mounting• No wiring required• Five-year warranty

PACKAGE CONTENTS• Passive Infrared (PIR) sensor with photocell• 9 Volt battery• USB cable• Quick Start Guide

USB ConnectionDip Switch

Start/Stop Button

Figure 1

4.) On the Welcome window, click on the [Next] button. 5.) Select a location for installation by clicking on [Browse] or allow default location and click on the [Next] button.

Page 2

8.) Once installation is complete, click on the [Close] button. 9.) Attach the USB cable to Tracker and computer (PC).

Confirm Dip switch 1 is set to ON. NOTE: If dip switch 1

is set in the OFF position, the Tracker is in sleep mode

and will not record. ( See Fig. 1)

11.) On the main screen menu, click on the Admin menu item.

12.) Click on the [Set Logger Info] button in Logger Admin. 13.) Click [OK] in the dialog box.

6.) Confirm Installation by clicking on the [Next] button. 7.) Program Installation progress will display in the status bar.

10.) Locate and double click on the Tracker Icon to open the Tracker Program.

14.) Enter a Device ID and Device Name and click [OK]. 15.) Click on [Set Time Stamp] button and click [OK] to set the Tracker’s current date and time. NOTE: Logger settings may still show previous date and time. This is okay.

TO BEGIN LOGGING20.) Turn artificial lights on, place the Tracker in the intended area, remove the lens and press the Start/ Stop Button on the Tracker.

The Green LED will begin flashing.

21.) Replace the lens and step away from the Tracker. The LED is visible through the lens. The Green LED will flash for 1 minute. During this time the Tracker is measuring the total light level in the space. To calibrate the natural light level contribution, proceed to step 22. If there is no natural daylight contribution, the Tracker will auto-calibrate for the artificial light - proceed to step 24.

22.) When the Green LED stops flashing, the Tracker will record the light level and begin flashing the Red LED. The Red LED will continue flashing for 1 minute and 30 seconds. During this time, turn off the artificial lights so the Tracker can measure the natural light contribution in the area.

23.) When the Red LED stops flashing, the Tracker has recorded and calibrated the natural light contribution. The artificial lights may now be turned back on.

24.) The Tracker is now logging occupancy and light levels. The Red LED will flash once every minute to indicate it is logging.

TO STOP LOGGING25.) Press the Start/Stop button on the Tracker. The Red LED will flash once.

DOWNLOADING AND RUNNING REPORTS26.) Connect the Tracker to the computer using the USB cable.

27.) Start the Tracker program by double clicking the Tracker icon.

16.) Click [Close] to close the Logger Admin window.

17.) Click Exit to close the Tracker program.

18.) Disconnect the Tracker from the computer and replace the lens.

19.) Using the included magnets, mount the Tracker in the desired location.

Page 3

33.) The Area will populate under Project Areas.

34.) For additional areas, connect the Tracker from that area and repeat steps 29-32 for remaining HBA Trackers.

34.) Click [Create Project Report].

28.) Click on [New Project]. 29.) Fill in the Project Properties and click [New Area].

30.) Enter Area Properties. 31.) Click on [Import from Logger] and select a log time from the list.

32.) Load the data and click [Ok].

Page 4