hbb connectors brochure
DESCRIPTION
Smiths Connectors HBB range of single pole, circular connectorscombine high current handling capability with small size and exceptional environmental performance. Designed for use in all types of high-power applications, the HBB series is particularly suitable for electric drives used in fighting vehicles, unmanned vehicles, ground-based and airborne avionics systems, rail transport and the automotive andindustrial sectors.TRANSCRIPT
-
HBBCONNECTOR SERIES
High Power, Quick Release Connectors
HOW TO ORDERFEATURESBENEFITS&
HYPERBOLOID CONTACT SYSTEMImproved power handling in a smaller spaceHigh number of mating cyclesLow contact resistanceShock and vibration immunity
EASE OF ASSEMBLY AND OF USEFinger proofedGender reversiblePolarised designQuick release latching mechanismLow component countSimple maintenance and speedy changeover
RELIABLE IN HARSHENVIRONMENT CONDITIONSEnvironmentally sealed to IPx7 and IP6K9K when mated360 EMI/RFI shielding
SUITABLE FOR A RANGEOF APPLICATIONSAluminium, nickel-plated or thermoplastic shells*Cable and panel mount variantsLow weight and ergonomic design
FOR MORE INFORMATION | smithsconnectors.com | Copyright 2014 Smiths Connectors | All Rights Reserved
1 2 3 4 5 6 7 8 9 10
1 CONNECTOR FAMILY 2 NOMINAL CURRENT RATING 0 3 0 300 AMp 0 5 0 500 AMp 3 SHELL GENDER p plUg R RECEpTAClE 4 SHELL POLARISING A pOlARISED CODE A, CONTACT CAp BlACk B pOlARISED CODE B, CONTACT CAp ORANgE C pOlARISED CODE C, CONTACT CAp BlUE D pOlARISED CODE D, CONTACT CAp gREy E pOlARISED CODE E, CONTACT CAp gREEN F pOlARISED CODE F, CONTACT CAp RED
5 SHELL MATERIAL* A HIgH STRENgTH AlUMINIUM AllOy BODy, zINC-COBAlT plATED B HIgH STRENgTH AlUMINIUM AllOy BODy, ElECTROlESS NICkEl plATED E HIgH STRENgTH AlUMINIUM AllOy BODy, BlACk zINC-NICkEl *Pleaseinquirewithoursalesofficeforfurthershelloptions.
6 CONTACT GENDER X pIN, gOlD plATED (1.27m gold on mating surface) y SOCkET, gOlD plATED (1.27m gold on mating surface)
7 CONTACT TERMINATION OPTIONS * CONTACT TO ACCEpT CABlE CRIMpED DIRECTly ON CONTACT AXIS. l CONTACT TO ACCEpT BOlTED TERMINATION E.g. lUggED CABlE OR BUSBAR. AlSO ORDER THIS OpTION FOR A plUg WITH RIgHT ANglE BACkSHEll
8 BACkSHELL OPTIONS 0 NO BACkSHEll A RIgHT-ANglE BACkSHEll (plUg ONly) B STRAIgHT BACkSHEll, AvAIlABlE ON plUgS AND RECEpTAClES WITH CRIMp CONTACT ONly
9 BACkSHELL ExIT CODE 0 EXIT CODE 0 ApplIES TO All STANDARD CONNECTORS
10 STANDARD VARIATIONS 0 0 0 NO vARIANT: DENOTES A plUg WITHOUT EMI BAND OR REAR MOUNT RECEpTAClE WITH NON-CONDUCTIvE O-RINg AND STANDARD lENgTH CONTACT 0 0 E EMI BAND FITTED (plUgS ONly) 0 C 0 REAR MOUNT RECEpTAClE WITH CONDUCTIvE pANEl O-RINg 0 M 0 FRONT MOUNT RECEpTAClE WITH CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 MS FRONT MOUNT RECEpTAClE WITH SHORT lUg/BUSBAR CONTACT AND CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 N 0 FRONT MOUNT RECEpTAClE WITH NON-CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 NS FRONT MOUNT RECEpTAClE WITH SHORT lUg/BUSBAR CONTACT AND NON-CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 1 2 plUgS ONly - EMI BAND AND RIgHT-ANglE BACkSHEll WITH kNURlED CABlE pORT 0 1 3 plUg EMI BAND AND STRAIgHT BACkSHEll WITH kNURlED CABlE pORT RECEpTAClE STRAIgHT BACkSHEll WITH kNURlED CABlE pORT
H BB
* for shell options, please inquire with our sales office
-
HBB SERIESSmiths Connectors HBB range of single pole, circular connectors combine high current handling capability with small size and exceptional environmental performance. Designed for use in all types of high-power applications, the HBB series is particularly suitable for electric drives used in fighting vehicles, unmanned vehicles, ground-based and airborne avionics systems, rail transport and the automotive and industrial sectors.
Designed for easy mating and quick release, HBB connectors use Hypertacs hyperboloid contact technology to attain current ratings of 300A and 500A with high reliability and excellent electrical integrity. Hyperboloid contacts produce contact resistance figures as low as 0.05m thus reducing resistive losses, easing the task of thermal management and providing better power handling in a smaller space.
Easy to assemble, HBB connectors are available in a choice of metal or high-strength composite shells*, are sealed to IPx7 and feature 360 EMI/RFI shielding. Cable or panel mount versions with straight or right angle back shells are supplied and the connectors are rated to 750VDC, and accept cables up to 70mm for 300A versions and 120mm for 500A versions.
TECHNICAL CHARACTERISTICS OUTlINE DRAWINgS (500 AMp vERSION)
MECHANICAL
Connector mating / unmating force
300 Amp connector N max. 350 500 Amp connector N max. 350
Endurance(mating and un-mating cycles min)
With EMI band 1000All Others 5000
Humidity (days @ 90/95 % RH at 40C)
56
Temperature range (operational&storage)
-55 C to + 150 C
Salt SprayZn/Co plated 300 hours Zn/Ni plated 300 hoursElectroless Nickel plated 48 hours
Sealing (mated)
BS EN 60529 IPx7ISO 20653:2006 IP6K9K
Vibration (EIA-364-28 E) Test Condition V, Test Condition Letter E (0.2 g2/Hz), duration 1.5 hours
Mechanical Shock (EIA-364-27 B) 25g, 11ms, half sine wave
MATERIALS
Metal shells Aluminium alloy
Latch ring Aluminium alloy/anodised
InsulationsInsulators PPSPin Caps Glass reinforced Nylon 66
Fixings Stainless steel
Contact components Copper alloy
Socket wires Copper beryllium alloy
Finishes
Contact mating surfaces1,27m min gold per ASTM-B-488, type II, grade C over 1.27m 2.40m nickel per SAE-AMS-QQ-N-290, class 2 over copper flash
Shells
Zinc/cobalt, ASTM-B-840 Grade 6 Type C, over AMS-C-26074 class 4 grade BorElectroless nickel, AMS-C-26074 class 4 grade BorZinc nickel trivalent black, ASTM-B-841 Class 1, Grade 10, over AMS-C-26074 class 4 grade B HBB 300 AMP DERATING
HBB 500 AMP DERATING
ELECTRICAL PERFORMANCE AND CURRENT DERATING
parameter level
300 Amp connector 500 Amp connector
Voltage rating @ sea level, Volts dc 750
Current rating, continuous, amps 300 500
Surge current 6 kA for 1 second 10 kA for 1 second
Contact resistance (EIA-364-06C), m max 0.1 0.05
Insulation resistance, G minimum 5
Shell to shell continuity, m max 15
Data from test using connectors each cabled with 1.2 metre length of 70 sq mm cable for 300 Amp and 120 sq mm for 500 Amp. Further derating may be necessary depending on the application.Derating curves generated according to EIA-364-70B Method 2.
00
100
200
300
400
500
Cur
rent
A
Ambient degrees C
50 100 150 200
00
100
200
300
400
500
600
700
800
Cur
rent
A
Ambient degrees C
50 100 150 200
* for shell options, please inquire with our sales office
500 AMP PLUG
45,5
1
9,5
(for l
ug)
70 (90 deg backshell)
91 (crimp)
75 (90 deg backshell)
To cable axis 77 (90 deg backshell)
92 (straight backshell)
101 (90 deg backshell)
Lug termination M10x1.5x18deep screw and washer supplied
with 90 deg backshell variant only
CO
NTA
CT
OPT
ION
SB
AC
KSH
ELL
OPT
ION
S
500 AMP RECEPTACLE, REAR MOUNTING
34.9
2
34.92
44.5
44.5
4.2
19.
5 (lu
g)
Panel 5 max
Lug termination M10x1.5x18
45
3
2
6
23.5 (for lug)
43.6 (for lug)
500 AMP RECEPTACLE, FRONT MOUNTING
34.92
44.5
44.5
34.9
2
4.2
3
2
19.
5 (lu
g)
6 Panel
Lug termination M10x1.5x18 deep
45
17.5 (lug, variant suffix *0MS or *0NS)
37.6 (crimp, variant suffix *0M0 or *0N0)
22.7 (lug, variant suffix *0M0 or *0N0)
Panel 5 max
61
4
3
500 AMP RECEPTACLE wITH BACkSHELL, REAR MOUNTING
Dimensions in mm
-
HBB SERIESSmiths Connectors HBB range of single pole, circular connectors combine high current handling capability with small size and exceptional environmental performance. Designed for use in all types of high-power applications, the HBB series is particularly suitable for electric drives used in fighting vehicles, unmanned vehicles, ground-based and airborne avionics systems, rail transport and the automotive and industrial sectors.
Designed for easy mating and quick release, HBB connectors use Hypertacs hyperboloid contact technology to attain current ratings of 300A and 500A with high reliability and excellent electrical integrity. Hyperboloid contacts produce contact resistance figures as low as 0.05m thus reducing resistive losses, easing the task of thermal management and providing better power handling in a smaller space.
Easy to assemble, HBB connectors are available in a choice of metal or high-strength composite shells*, are sealed to IPx7 and feature 360 EMI/RFI shielding. Cable or panel mount versions with straight or right angle back shells are supplied and the connectors are rated to 750VDC, and accept cables up to 70mm for 300A versions and 120mm for 500A versions.
TECHNICAL CHARACTERISTICS OUTlINE DRAWINgS (500 AMp vERSION)
MECHANICAL
Connector mating / unmating force
300 Amp connector N max. 350 500 Amp connector N max. 350
Endurance(mating and un-mating cycles min)
With EMI band 1000All Others 5000
Humidity (days @ 90/95 % RH at 40C)
56
Temperature range (operational&storage)
-55 C to + 150 C
Salt SprayZn/Co plated 300 hours Zn/Ni plated 300 hoursElectroless Nickel plated 48 hours
Sealing (mated)
BS EN 60529 IPx7ISO 20653:2006 IP6K9K
Vibration (EIA-364-28 E) Test Condition V, Test Condition Letter E (0.2 g2/Hz), duration 1.5 hours
Mechanical Shock (EIA-364-27 B) 25g, 11ms, half sine wave
MATERIALS
Metal shells Aluminium alloy
Latch ring Aluminium alloy/anodised
InsulationsInsulators PPSPin Caps Glass reinforced Nylon 66
Fixings Stainless steel
Contact components Copper alloy
Socket wires Copper beryllium alloy
Finishes
Contact mating surfaces1,27m min gold per ASTM-B-488, type II, grade C over 1.27m 2.40m nickel per SAE-AMS-QQ-N-290, class 2 over copper flash
Shells
Zinc/cobalt, ASTM-B-840 Grade 6 Type C, over AMS-C-26074 class 4 grade BorElectroless nickel, AMS-C-26074 class 4 grade BorZinc nickel trivalent black, ASTM-B-841 Class 1, Grade 10, over AMS-C-26074 class 4 grade B HBB 300 AMP DERATING
HBB 500 AMP DERATING
ELECTRICAL PERFORMANCE AND CURRENT DERATING
parameter level
300 Amp connector 500 Amp connector
Voltage rating @ sea level, Volts dc 750
Current rating, continuous, amps 300 500
Surge current 6 kA for 1 second 10 kA for 1 second
Contact resistance (EIA-364-06C), m max 0.1 0.05
Insulation resistance, G minimum 5
Shell to shell continuity, m max 15
Data from test using connectors each cabled with 1.2 metre length of 70 sq mm cable for 300 Amp and 120 sq mm for 500 Amp. Further derating may be necessary depending on the application.Derating curves generated according to EIA-364-70B Method 2.
00
100
200
300
400
500
Cur
rent
A
Ambient degrees C
50 100 150 200
00
100
200
300
400
500
600
700
800
Cur
rent
A
Ambient degrees C
50 100 150 200
* for shell options, please inquire with our sales office
500 AMP PLUG
45,5
1
9,5
(for l
ug)
70 (90 deg backshell)
91 (crimp)
75 (90 deg backshell)
To cable axis 77 (90 deg backshell)
92 (straight backshell)
101 (90 deg backshell)
Lug termination M10x1.5x18deep screw and washer supplied
with 90 deg backshell variant only
CO
NTA
CT
OPT
ION
SB
AC
KSH
ELL
OPT
ION
S
500 AMP RECEPTACLE, REAR MOUNTING
34.9
2
34.92
44.5
44.5
4.2
19.
5 (lu
g)
Panel 5 max
Lug termination M10x1.5x18
45
3
2
6
23.5 (for lug)
43.6 (for lug)
500 AMP RECEPTACLE, FRONT MOUNTING
34.92
44.5
44.5
34.9
2
4.2
3
2
19.
5 (lu
g)
6 Panel
Lug termination M10x1.5x18 deep
45
17.5 (lug, variant suffix *0MS or *0NS)
37.6 (crimp, variant suffix *0M0 or *0N0)
22.7 (lug, variant suffix *0M0 or *0N0)
Panel 5 max
61
4
3
500 AMP RECEPTACLE wITH BACkSHELL, REAR MOUNTING
Dimensions in mm
-
HBB SERIESSmiths Connectors HBB range of single pole, circular connectors combine high current handling capability with small size and exceptional environmental performance. Designed for use in all types of high-power applications, the HBB series is particularly suitable for electric drives used in fighting vehicles, unmanned vehicles, ground-based and airborne avionics systems, rail transport and the automotive and industrial sectors.
Designed for easy mating and quick release, HBB connectors use Hypertacs hyperboloid contact technology to attain current ratings of 300A and 500A with high reliability and excellent electrical integrity. Hyperboloid contacts produce contact resistance figures as low as 0.05m thus reducing resistive losses, easing the task of thermal management and providing better power handling in a smaller space.
Easy to assemble, HBB connectors are available in a choice of metal or high-strength composite shells*, are sealed to IPx7 and feature 360 EMI/RFI shielding. Cable or panel mount versions with straight or right angle back shells are supplied and the connectors are rated to 750VDC, and accept cables up to 70mm for 300A versions and 120mm for 500A versions.
TECHNICAL CHARACTERISTICS OUTlINE DRAWINgS (500 AMp vERSION)
MECHANICAL
Connector mating / unmating force
300 Amp connector N max. 350 500 Amp connector N max. 350
Endurance(mating and un-mating cycles min)
With EMI band 1000All Others 5000
Humidity (days @ 90/95 % RH at 40C)
56
Temperature range (operational&storage)
-55 C to + 150 C
Salt SprayZn/Co plated 300 hours Zn/Ni plated 300 hoursElectroless Nickel plated 48 hours
Sealing (mated)
BS EN 60529 IPx7ISO 20653:2006 IP6K9K
Vibration (EIA-364-28 E) Test Condition V, Test Condition Letter E (0.2 g2/Hz), duration 1.5 hours
Mechanical Shock (EIA-364-27 B) 25g, 11ms, half sine wave
MATERIALS
Metal shells Aluminium alloy
Latch ring Aluminium alloy/anodised
InsulationsInsulators PPSPin Caps Glass reinforced Nylon 66
Fixings Stainless steel
Contact components Copper alloy
Socket wires Copper beryllium alloy
Finishes
Contact mating surfaces1,27m min gold per ASTM-B-488, type II, grade C over 1.27m 2.40m nickel per SAE-AMS-QQ-N-290, class 2 over copper flash
Shells
Zinc/cobalt, ASTM-B-840 Grade 6 Type C, over AMS-C-26074 class 4 grade BorElectroless nickel, AMS-C-26074 class 4 grade BorZinc nickel trivalent black, ASTM-B-841 Class 1, Grade 10, over AMS-C-26074 class 4 grade B HBB 300 AMP DERATING
HBB 500 AMP DERATING
ELECTRICAL PERFORMANCE AND CURRENT DERATING
parameter level
300 Amp connector 500 Amp connector
Voltage rating @ sea level, Volts dc 750
Current rating, continuous, amps 300 500
Surge current 6 kA for 1 second 10 kA for 1 second
Contact resistance (EIA-364-06C), m max 0.1 0.05
Insulation resistance, G minimum 5
Shell to shell continuity, m max 15
Data from test using connectors each cabled with 1.2 metre length of 70 sq mm cable for 300 Amp and 120 sq mm for 500 Amp. Further derating may be necessary depending on the application.Derating curves generated according to EIA-364-70B Method 2.
00
100
200
300
400
500
Cur
rent
A
Ambient degrees C
50 100 150 200
00
100
200
300
400
500
600
700
800
Cur
rent
A
Ambient degrees C
50 100 150 200
* for shell options, please inquire with our sales office
500 AMP PLUG
45,5
1
9,5
(for l
ug)
70 (90 deg backshell)
91 (crimp)
75 (90 deg backshell)
To cable axis 77 (90 deg backshell)
92 (straight backshell)
101 (90 deg backshell)
Lug termination M10x1.5x18deep screw and washer supplied
with 90 deg backshell variant only
CO
NTA
CT
OPT
ION
SB
AC
KSH
ELL
OPT
ION
S
500 AMP RECEPTACLE, REAR MOUNTING
34.9
2
34.92
44.5
44.5
4.2
19.
5 (lu
g)
Panel 5 max
Lug termination M10x1.5x18
45
3
2
6
23.5 (for lug)
43.6 (for lug)
500 AMP RECEPTACLE, FRONT MOUNTING
34.92
44.5
44.5
34.9
2
4.2
3
2
19.
5 (lu
g)
6 Panel
Lug termination M10x1.5x18 deep
45
17.5 (lug, variant suffix *0MS or *0NS)
37.6 (crimp, variant suffix *0M0 or *0N0)
22.7 (lug, variant suffix *0M0 or *0N0)
Panel 5 max
61
4
3
500 AMP RECEPTACLE wITH BACkSHELL, REAR MOUNTING
Dimensions in mm
-
HBBCONNECTOR SERIES
High Power, Quick Release Connectors
HOW TO ORDERFEATURESBENEFITS&
HYPERBOLOID CONTACT SYSTEMImproved power handling in a smaller spaceHigh number of mating cyclesLow contact resistanceShock and vibration immunity
EASE OF ASSEMBLY AND OF USEFinger proofedGender reversiblePolarised designQuick release latching mechanismLow component countSimple maintenance and speedy changeover
RELIABLE IN HARSHENVIRONMENT CONDITIONSEnvironmentally sealed to IPx7 and IP6K9K when mated360 EMI/RFI shielding
SUITABLE FOR A RANGEOF APPLICATIONSAluminium, nickel-plated or thermoplastic shells*Cable and panel mount variantsLow weight and ergonomic design
FOR MORE INFORMATION | smithsconnectors.com | Copyright 2014 Smiths Connectors | All Rights Reserved
1 2 3 4 5 6 7 8 9 10
1 CONNECTOR FAMILY 2 NOMINAL CURRENT RATING 0 3 0 300 AMp 0 5 0 500 AMp 3 SHELL GENDER p plUg R RECEpTAClE 4 SHELL POLARISING A pOlARISED CODE A, CONTACT CAp BlACk B pOlARISED CODE B, CONTACT CAp ORANgE C pOlARISED CODE C, CONTACT CAp BlUE D pOlARISED CODE D, CONTACT CAp gREy E pOlARISED CODE E, CONTACT CAp gREEN F pOlARISED CODE F, CONTACT CAp RED
5 SHELL MATERIAL* A HIgH STRENgTH AlUMINIUM AllOy BODy, zINC-COBAlT plATED B HIgH STRENgTH AlUMINIUM AllOy BODy, ElECTROlESS NICkEl plATED E HIgH STRENgTH AlUMINIUM AllOy BODy, BlACk zINC-NICkEl *Pleaseinquirewithoursalesofficeforfurthershelloptions.
6 CONTACT GENDER X pIN, gOlD plATED (1.27m gold on mating surface) y SOCkET, gOlD plATED (1.27m gold on mating surface)
7 CONTACT TERMINATION OPTIONS * CONTACT TO ACCEpT CABlE CRIMpED DIRECTly ON CONTACT AXIS. l CONTACT TO ACCEpT BOlTED TERMINATION E.g. lUggED CABlE OR BUSBAR. AlSO ORDER THIS OpTION FOR A plUg WITH RIgHT ANglE BACkSHEll
8 BACkSHELL OPTIONS 0 NO BACkSHEll A RIgHT-ANglE BACkSHEll (plUg ONly) B STRAIgHT BACkSHEll, AvAIlABlE ON plUgS AND RECEpTAClES WITH CRIMp CONTACT ONly
9 BACkSHELL ExIT CODE 0 EXIT CODE 0 ApplIES TO All STANDARD CONNECTORS
10 STANDARD VARIATIONS 0 0 0 NO vARIANT: DENOTES A plUg WITHOUT EMI BAND OR REAR MOUNT RECEpTAClE WITH NON-CONDUCTIvE O-RINg AND STANDARD lENgTH CONTACT 0 0 E EMI BAND FITTED (plUgS ONly) 0 C 0 REAR MOUNT RECEpTAClE WITH CONDUCTIvE pANEl O-RINg 0 M 0 FRONT MOUNT RECEpTAClE WITH CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 MS FRONT MOUNT RECEpTAClE WITH SHORT lUg/BUSBAR CONTACT AND CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 N 0 FRONT MOUNT RECEpTAClE WITH NON-CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 NS FRONT MOUNT RECEpTAClE WITH SHORT lUg/BUSBAR CONTACT AND NON-CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 1 2 plUgS ONly - EMI BAND AND RIgHT-ANglE BACkSHEll WITH kNURlED CABlE pORT 0 1 3 plUg EMI BAND AND STRAIgHT BACkSHEll WITH kNURlED CABlE pORT RECEpTAClE STRAIgHT BACkSHEll WITH kNURlED CABlE pORT
H BB
* for shell options, please inquire with our sales office
-
HBBCONNECTOR SERIES
High Power, Quick Release Connectors
HOW TO ORDERFEATURESBENEFITS&
HYPERBOLOID CONTACT SYSTEMImproved power handling in a smaller spaceHigh number of mating cyclesLow contact resistanceShock and vibration immunity
EASE OF ASSEMBLY AND OF USEFinger proofedGender reversiblePolarised designQuick release latching mechanismLow component countSimple maintenance and speedy changeover
RELIABLE IN HARSHENVIRONMENT CONDITIONSEnvironmentally sealed to IPx7 and IP6K9K when mated360 EMI/RFI shielding
SUITABLE FOR A RANGEOF APPLICATIONSAluminium, nickel-plated or thermoplastic shells*Cable and panel mount variantsLow weight and ergonomic design
FOR MORE INFORMATION | smithsconnectors.com | Copyright 2014 Smiths Connectors | All Rights Reserved
1 2 3 4 5 6 7 8 9 10
1 CONNECTOR FAMILY 2 NOMINAL CURRENT RATING 0 3 0 300 AMp 0 5 0 500 AMp 3 SHELL GENDER p plUg R RECEpTAClE 4 SHELL POLARISING A pOlARISED CODE A, CONTACT CAp BlACk B pOlARISED CODE B, CONTACT CAp ORANgE C pOlARISED CODE C, CONTACT CAp BlUE D pOlARISED CODE D, CONTACT CAp gREy E pOlARISED CODE E, CONTACT CAp gREEN F pOlARISED CODE F, CONTACT CAp RED
5 SHELL MATERIAL* A HIgH STRENgTH AlUMINIUM AllOy BODy, zINC-COBAlT plATED B HIgH STRENgTH AlUMINIUM AllOy BODy, ElECTROlESS NICkEl plATED E HIgH STRENgTH AlUMINIUM AllOy BODy, BlACk zINC-NICkEl *Pleaseinquirewithoursalesofficeforfurthershelloptions.
6 CONTACT GENDER X pIN, gOlD plATED (1.27m gold on mating surface) y SOCkET, gOlD plATED (1.27m gold on mating surface)
7 CONTACT TERMINATION OPTIONS * CONTACT TO ACCEpT CABlE CRIMpED DIRECTly ON CONTACT AXIS. l CONTACT TO ACCEpT BOlTED TERMINATION E.g. lUggED CABlE OR BUSBAR. AlSO ORDER THIS OpTION FOR A plUg WITH RIgHT ANglE BACkSHEll
8 BACkSHELL OPTIONS 0 NO BACkSHEll A RIgHT-ANglE BACkSHEll (plUg ONly) B STRAIgHT BACkSHEll, AvAIlABlE ON plUgS AND RECEpTAClES WITH CRIMp CONTACT ONly
9 BACkSHELL ExIT CODE 0 EXIT CODE 0 ApplIES TO All STANDARD CONNECTORS
10 STANDARD VARIATIONS 0 0 0 NO vARIANT: DENOTES A plUg WITHOUT EMI BAND OR REAR MOUNT RECEpTAClE WITH NON-CONDUCTIvE O-RINg AND STANDARD lENgTH CONTACT 0 0 E EMI BAND FITTED (plUgS ONly) 0 C 0 REAR MOUNT RECEpTAClE WITH CONDUCTIvE pANEl O-RINg 0 M 0 FRONT MOUNT RECEpTAClE WITH CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 MS FRONT MOUNT RECEpTAClE WITH SHORT lUg/BUSBAR CONTACT AND CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 N 0 FRONT MOUNT RECEpTAClE WITH NON-CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 NS FRONT MOUNT RECEpTAClE WITH SHORT lUg/BUSBAR CONTACT AND NON-CONDUCTIvE pANEl O-RINg (notavailablewithbackshelloptionB) 0 1 2 plUgS ONly - EMI BAND AND RIgHT-ANglE BACkSHEll WITH kNURlED CABlE pORT 0 1 3 plUg EMI BAND AND STRAIgHT BACkSHEll WITH kNURlED CABlE pORT RECEpTAClE STRAIgHT BACkSHEll WITH kNURlED CABlE pORT
H BB
* for shell options, please inquire with our sales office