*Example HDP 380 fuel consumption, Piston/Plunger-Ø 50 mm, CAT C15 TIER 4 FINAL 3 speed manual transmission

Engine speed rpm

Gear Pump speed rpm

Pump power rating

hp

Q gpm Flow rate

P psi

Operating pressure

Specific fuel

consumption lb/hp h

Motor power rating

kW

Fuel consumption

gph

1800 3 1800 516 54 14,500 0.337 540 25

1100 3 1100 313 33 14,500 0.345 340 17

1800 2 900 260 27 14,500 0.353 280 13

1100 2 550 156 17 14,500 0.362 170 8

1800 1 300 87 9 14,500 0.397 100 6

1100 1 183 53 5.5 14,500 0.432 67 4

This pump unit enables to you adapt the flow rate to suit the work you are doing. The 3 transmission ratios 1:1, 1:2 and 1:6 cover the most important areas of industrial cleaning. The biggest benefit for you is the reduced diesel fuel consumption as you only generate the power you actually need

For manual blasting gun work the high pressure pump shaft only rotates at 1/6 th of maximum engine speed thereby saving up to 48 litres of fuel per hour.* The low speed reduces wear on the pump and engine by operating in the partial load range

The environmental benefits include lower CO² and noise emissions

Lower torque on the engine in gears 2 and 3 at the same pressure

No hot overflow water to be returned to tank

Each gear is simply selected when the engine is not running

HDP 380 Diesel driven pump unit with manual 3 speed transmission only uses that energy needed for the job to be done.

3rd Gear Full pump power as typically employed for tank cleaning

2nd Gear Medium pump power for pipe and tube bundle cleaning

1st Gear Low pump power for manual blasting gun work

Fuel saving with transmission when working with a manual blasting gun 12.7 gph CO2reduction 274 lb/hour

Unit

Type

Pump

Typ

Op. pressure

[psi]

Flow- rate

[gpm]

Power rating [hp]

S 1100 - 38 HDP 382 14,500 53.86

510 S 1600 -38

HDP 383 22,620 33.79

HDP 383 17,840 44.35

Aquajet® 38 HDP 384 43,500 16.10 470

Rod force: 210 kN

Stroke: 2.95 inch

Mean piston speed at n2

340 1/min. = 2.82 f/sec

410 1/min. = 3.38 f/sec

490 1/min. = 4.04 f/sec

„S Class“ and „Aquajet“ units can be built into 20 ft. or 25 ft. sound damped containers, sound damped aluminium truck bodies or trailer containers (BDF).

All „S Class“ and „Aquajet“ units are complete with :

Rigid base frame with anti vibration mounting feet

Insulated spiral silencer installation (32 dB(A) reduction) with exhaust and rain cap, particle filter or Ad Blue

ES 2 electronic control and monitoring system with digital display for pump and diesel engine

Pneumatic system with shaft driven compressor, air tank and bypass control

Pneumatic pressure regulating valve or bypass valve

Stainless steel suction side installation with boost pump and water filter („S Class“: 200µ & 10µ „Aquajet“: 1 µ)

There are optional extras available which include pump head lifting device, heating systems, water tanks and fuel tanks. .

S 1100 - 38 to 14,500 psi

S 1600 - 38 to 22,620 psi

Aquajet® 38 to 43,500 psi

Type overview

The following data table shows just a few examples of maximum performance combinations from the wide range

Hammelmann Corp. 436 Southpointe Drive Phone (001) 937-859-8777 Miamisburg, Ohio 45342 Fax: (001) 937-859-9188 eMail: mail@hammelmann.com http://www.hammelmann.com 11/15 © Copyright Hammelmann GmbH, Oelde, Germany. Subject to modification.

*Example HDP 500 fuel consumption, Piston/Plunger-Ø 50 mm, with VOLVO TAD 1672 VE TIER 4 FINAL and 3 speed manual transmission

Engine speed rpm

Gear Pump speed rpm

Pump power rating

hp

Q gpm Flow rate

P psi

Operatingpressure

Specific fuel

consumption lb/hp h

Motor power rating

hp

Fuel consumption

gp/h

1800 3 1800 680 69 15,000 0.337 700 33

1100 3 1100 410 42 15,000 0.317 430 19

1800 2 900 340 34 15,000 0.345 360 17

1100 2 550 210 21 15,000 0.329 225 10

1800 1 300 115 11 15,000 0.411 130 7.4

1100 1 183 70 7 15,000 0.395 84 4.8

This pump unit enables to you adapt the flow rate to suit the work you are doing. The 3 transmission ratios 1:1, 1:2 and 1:6 cover the most important areas of industrial cleaning. The biggest benefit for you is the reduced diesel fuel consumption as you only generate the power you actually need

For manual blasting gun work the high pressure pump shaft only rotates at 1/6 th of maximum engine speed thereby saving up to 54 litres of fuel per hour.* The low speed reduces wear on the pump and engine by operating in the partial load range

The environmental benefits include lower CO² and noise emissions

Lower torque on the engine in gears 2 and 3 at the same pressure

No hot overflow water to be returned to tank

Each gear is simply selected when the engine is not running

As variable as your cleaning applications HDP 500 Diesel driven pump unit with manual 3 speed transmission only uses that energy needed for the job to be done.

3rd Gear Full pump power as typically employed for tank cleaning

2nd Gear Medium pump power for pipe and tube bundle cleaning

1st Gear Low pump power for manual blasting gun work

Fuel saving with transmission when working with a manual blasting gun 14,3 gph CO2 reduction 308 lb/hour

Unit

Type

Pump

Typ

Op. pressure

[psi]

Flow- rate

[gpm]

Power rating [HP]

S 1100 - 50 HDP 502 15,080 69.17

670 S 1600 - 50

HDP 503 23,640 43.82

HDP 503 18,710 55.97

Aquajet® 50 HDP 504 43,500 20.33 600

Rod force: 210 kN

Stroke: 3.94 inch

Mean piston speed at n2

315 rpm = 3.48 f/sec

380 rpm = 4.17 f/sec

465 rpm = 5.05 f/sec

„S Class“ and „Aquajet“ units can be built into 20 ft. or 25 ft. sound dampedcontainers, sound damped aluminium truck bodies or trailer containers (BDF).

All „S Class“ and „Aquajet“ units are complete with : Rigid base frame with anti

vibration mounting feet

Insulated spiral silencer installation (32 dB(A) reduction) with exhaust and rain cap, particle filter or Ad Blue

ES 2 electronic control and monitoring system with digital display for pump and diesel engine

Pneumatic system with shaft driven compressor, air tank and bypass control

Pneumatic pressure regulating valve or bypass valve

Stainless steel suction side installation with boost pump and water filter („S Class“: 200µ & 10µ „Aquajet“: 1 µ)

There are optional extras available which include pump head lifting device, heating systems, water tanks and fuel tanks.

S 1100 - 50 to 15,080 psi

S 1600 - 50 to 23,640 psi

Aquajet® 50 to 43,500 psi

Type overview

The following data table shows just a few examples of maximum performance combinations from the wide range

Series HDP 500 Diesel driven high pressure pump unit with manual 3 speed transmission

Hammelmann Corp. 436 Southpointe Drive Phone (001) 937-859-8777 Miamisburg, Ohio 45342 Fax: (001) 937-859-9188 eMail: mail@hammelmann.com http://www.hammelmann.com 11/15 © Copyright Hammelmann GmbH, Oelde, Germany. Subject to modification.