hebei sinta frp product co., ltd contentshebei sinta frp products co., ltd locates in the north of...
TRANSCRIPT
-
01
02
03
04
Company profile
Product category
Production plant
Contact information
Contents
Hebei Sinta FRP Product Co., Ltd
-
Company Profile
Hebei Sinta FRP Products CO., Ltd locates in the North of China, having more than 10 years' exportation experience. We are specialized in various cooling tower spare parts, is an enterprise engaged in designing, manufacturing and trading.Our products mainly include cooling tower pvc fills, drift eliminators, mist eliminators and nozzles.They are widely used in various brands of cross flow/counter flow cooling towers and evaporative condenser, such as Marley, BAC(Baltimore), Liangchi, Kuken, Spindle, Kingsun, Evapco, etc. We can also open new mould to make special pattern and size fills based on customers' request. Sinta always provide best quality and excellent service to meet customer all requirements, sincerely hope to establish good and long time cooperation with every customer!
-
Product category
♦ Marley cooling tower fills
♦ BAC cooling tower fills
♦ Liangchi cooling tower fills
♦ Kuken cooling tower fill
♦ Oblique cooling tower fills
♦ Spindle cooling tower fills
♦ Other fills
-
Marley cooling tower fills
Lorem ipsum dolor sit amet consectetur
Width 714 / 813 / 915 / 1220 / 1525mm
Length any length
Sheet spacing 19 mm
Thickness 0.38mm
Flute angle 30˚
Sheets per FT 16
Marley fill is one of the most important components for exchange of gas and water in Marley cooling tower. It is the major part to improve cooling tower working efficiency and make sure the economy and safe operation. With the development of plastic industry, cross-current tower drench waste water into corrugated fills, which has many advantages like heat dissipation, durable, good performance, small ventilation resistance... etc.Based on these easy and other advantages it is widely used in different types of large, medium and small cooling towers.
-
BAC cooling tower fills
BAC Evaporative condensers provide heat rejection for many types of systems, and the specific application will largely determine which BAC Evaporative Condenser is best suited for a project. The information contained within this section is geared towards the use of evaporative condensers in the HVAC and light industrial markets only. Evaporative condensers are used in these markets to provide lower condensing temperatures and compressor horsepower savings of up to 15 percent when compared with traditional systems.There are wo types of evaporative condensers: combined flow and counterflow.
Size Any length ×1330mm width
Thickness 0.35mm-0.45mm
Application temperature -35°C ~ 75°C
Tensile StrengthMPa 23°C 55
Coefficient of heatconductivity(W/MK)
0.14
Coefficient of themal expansion()
0.63
-
Oblique cooling tower fills
Oblique cooling tower fills also called cross-fluted film fill mediamanufactured from rigid PVC sheets conforming to CTI STD-136for cooling tower heat-transfer applications. The media is fabricated from corrugated PVC sheets that are solvent-welded for maximum strength and resistant to UV, rot, fungus, organic and inorganic solvents, acids, alkalis, and chemicals normally found in cooling tower waters.
Width 150 / 305 / 600mm
length any length
height any height
sheet thickness 0.25-0.40mm
wave height 12/19/25mm
material pvc , pp
application counter flow cooling tower
-
Kuken cooling tower fill
This kind of PVC filler for Square Cooling Tower Parts with the advanced technical, long lifetime, low resistance, light weight. During the service, the fill can increase the water flow process. It is widely used in Square cooling tower.Characters acid - proofalkali - resistinganticorrosion for the organic solventgood performance of inflaming retardingIncreasing cross-sectional areaadd water retention time
Material: PVC Length Customized
Width 920mm / 730mm
Gap 20mm (0.79")
Thickness 0.27mm
Temperature suitable -35°C ~ 60°C
Color Black, gray
Shaping mode Plastic extrusion mould
-
Liangchi cooling tower fills
Material: PVC
Length 400mm / 800mm /1600mm
Width 750mm (29.5")
Gap 20mm
Thickness 0.3mm-0.6mm
Temperature suitable -35 °C ~ 60°C
Color Black, gray
Shaping mode Plastic extrusion mould
PVC material filling, filling is glued with a fixed pitch, provide evenly water distribution and is unlikely to impede, and is convenient for cleaning.Feature:Deal in "dirty water" applications.Missing nozzles.Water easily redistributes itself.Ideal in dusty or wooded environments.Easy maintenance.
-
S p i n d l e C o o l i n g To w e r F i l l s
Size(mm) Fills Width(mm)Fills Height
(mm)
Fill thickness
(mm)
Pitch Distance
(mm)
850*1000 850 1000 0.30 14.5
1000*1000 1000 1000 0.30 14.5
Spindle cooling Tower Fill is one of the most important components for exchange of gas and water in cooling tower. It is the major parts to improve the efficiency of cooling tower and make sure the economy and safe operation. With the development of the plastic industry, counter-current tower drench water plastic packing.
Temperature suitable -35°C~60°C
Color Black, gray
Shaping mode Plastic extrusion mould
-
O t h e r f i l l s
S wave fillW0.5m × L1m
Offset fluted fill W600mm× any length×any height W0.5m × 1/1.5m × any height
-
N o z z l e s
-
Factory Picture