high pressure leak tester - bosch diagnostics · hpk 200 accessory kit for hd and medium duty...
TRANSCRIPT
HIGH PRESSURE LEAK TESTER
Bosch HPT 500
High-pressure leak detection for heavy-duty system diagnostics & repair
HPK 200 Accessory Kit for HD and Medium Duty Applications (1699500001)
f Cooling system adapter
f SmokeMeister wands
f Exhaust stack retention hoop
f Power intake adapter 3.9" (2 included)
f Accessory storage case
f Halogen inspection light
f Vapor producing fluid
f Ball-end hex point L key
f Oxygen sensor port adapter
f Temperature sensor port adapter
f Pressure sensor port adapter
f Block off coupler
f Detachable 12V DC power cable
f Quick start guide
Test entire system in 15 minutes
Infinitely variable flow to pinpoint peaks
Dual operating modes: smoke or air-only cycle
Visual vapor pinpoints all leaks
Flow meter to measure flow rate
Variable pressure simulates truck boost to safely test with engine off
Made in USA quality guarantee
110 - 240V AC power inlet
Low operating cost pennies per test
Constructed from steel and billet aluminum for durability
12-24 volt DC
HPT 500 (1699500000)
f High pressure leak tester
f Vapor producing fluid (1 bottle)
f Remote control key fob
f AC Power cable (120V)
f Fill port hex hey
f Wand / tip adapter
17-05 © 2017 Bosch Automotive Service Solutions Inc. 28635 Mound Road | Warren, MI 48092 | Phone: 1-800-321-4889 | Fax: 1 800 283-8665
HPT 500 Features f Produce leak detection "smoke" at higher pressure than standard machines (up to 20psi) for higher pressure systems
f Higher flow rate fills the system with smoke up to 5 times faster
f Ideal for finding leaks in exhaust after-treatment systems
f Test entire system, from intake to exhaust, in one 15 minute test
f High-pressure and large volume systems found in heavy-duty truck and turbocharged passenger vehicles