hinged insect screen guide - andersen windows/media/aw/files/technical-docs/... · (1) for door...
TRANSCRIPT
“Andersen” and all other trademarks where denoted are marks of Andersen Corporation. ©2003-2009 Andersen Corporation. All rights reser ved. 0005328 BB Revised 11/16/09
Hinged Insect Screen Guidefor Andersen® 400 Series Frenchwood® Hinged Patio Door Single Doors; Active Panel Right Hinged (AR) and Active Panel Left Hinged (AL) or Double Doors; Active Panel Passive Panel (AP) and Passive Panel Active Panel (PA)
Instructions are for typical, new wood-framed wall construction with weather protection in place.
Instructions may not be right for all installations due to building design, construction materials or methods used and/or building or site conditions. Consult a contractor or architect for recommendations.
Flanges on the unit alone will not properly flash and seal the window. Follow these instructions carefully.
For questions call 1-888-888-7020 Monday - Friday, 7 a.m. to 7 p.m. and Saturday, 8 a.m. to 4 p.m. central time.
For more information and/or guides visit andersenwindows.com.
Please leave this guide with building owner.
Thank you for choosing Andersen.
▶▶ Read▶guide▶from▶beginning▶to▶end▶before▶starting▶installation.▶Read▶all▶warnings▶and▶cautions▶during▶unit▶installation.▶▶
Use caution when working at elevated heights and around unit openings. Follow manufacturers’ instructions for ladders and/or scaffolding. Failure to do so may result in injury or death.
Follow manufacturers’ instructions for hand or power tools. Always wear safety glasses. Failure to do so may result in injury and/or product damage.
Windows and doors can be heavy. Use safe lifting techniques and a reasonable number of people with enough strength to lift, carry and install window and door products to avoid injury and/or product damage.
Parts Included for AR/AL Single Patio Doors 6'8" 6'11" 8'0"
(1) (1) (1) InstallationGuide(1) (1) (1) HingedDoorInsectScreen(1) (1) (1) InsectScreenSweep(2) (2) (2) #8x1/2"Screw (InteriorSweep)(2) (2) (2) BugSealStrip(Sides)(1) (1) (1) BugSealStrip(Top)(2) (2) (3) LowerHingeLeaf(2) (2) (3) UpperHingeLeaf(2) (2) (3) HingePin(1) (1) (1) HingePlacementTemplate(2) (2) (2) CoverPlate(4) (4) (6) PlasticHolePlug(4) (4) (6) #8x1/2"Screw (UpperLeafofHinge)(4) (4) (6) 3/16"x9/32"Rivet (LowerLeafofHinge)
(13) (13) (13) 1/8"x7/32"Rivet (BugSealStrips)
Latch Set Parts
(1) OutsideHandle(1) OutsideHandleReleaseButton(1) InsideLatchandOperator(1) UnkeyedSteelSpindle(1) SpindleSpring(2) #6-32x1-1/4"Bolt(HandleAttachment)(1) #8x5/8"Screw(HandleAttachment)(1) LatchStrikePlate(2) #6x3/4"Screw(StrikePlateAttachment)(2) LatchShim
Door Closer Parts
(1) CloserAssembly(1) HoldOpenWasher(1) HeadJambBracket(3) #10x7/8"Screw(HeadJambBracketAttachment)(1) HeadJambBracketBushing(1) #6x1/2"Screw(HeadJambBracketConnectiontoCloser)(1) DoorBracket(2) #10x1/2"Screw(DoorBracketAttachmenttoInsectScreenDoor)(1) DoorBracketConnectingPin
Tools and Supplies•SafetyGlasses•UtilityKnife•#2PhillipsHeadScrewdriver•1/8"and3/16"DrillBits•NailsetorPunch•Hammer•Drill/Driver
AR/AL Single Patio Door
Exterior View
1. Attach Bug Seal Strips• IdentifyBug Seal Strip fordoorhead(top),Bug Seal
Strips fordoorjambs(sides),and1/8" Rivets forattachmenttodoorframe.
•Removeanyexcesssealantfromuppercornersofdoorframeusingautilityknife,toallowforproperinsectscreenoperation.
Parts Included for AP/PA Double Patio Doors 6'8" 6'11" 8'0"(1) (1) (1) InstallationGuide(2) (2) (2) HingedDoorInsectScreen(1) (1) (1) InsectScreenSweep(ActivePanel)(1) (1) (1) InsectScreenSweep(PassivePanel)(16) (16) (20) #8x1/2"Screw (InteriorSweep&UpperHingeLeaf)(2) (2) (2) BugSealStrip(Sides)(1) (1) (1) BugSealStrip(Top)(4) (4) (6) LowerHingeLeaf(4) (4) (6) UpperHingeLeaf(4) (4) (6) HingePin(1) (1) (1) HingePlacementTemplate(2) (2) (2) CoverPlate(8) (8) (12) 3/16"x9/32"Rivet (LowerLeafofHinge)
(16) (16) (16) 1/8"x7/32"Rivet (BugSealStrips&HeadClip)
Astragal Parts
(1) AstragalAssembly(1) SillSeal(2) ScrewCover(1) HeadClip
Latch Set Parts(1) OutsideHandle(1) OutsideHandleReleaseButton(1) InsideLatchandOperator(1) UnkeyedSteelSpindle(1) SpindleSpring(2) #6-32x1-1/4"Bolt (HandleAttachment)
(1) #8x5/8"Screw (HandleAttachment)
Door Closer Parts
(1) CloserAssembly(1) HoldOpenWasher(1) HeadJambBracket(3) #10x7/8"Screw (HeadJambBracketAttachment)
(1) HeadJambBracketBushing(1) #6x1/2"Screw (HeadJambBracketConnectiontoCloser)
(1) DoorBracket(2) #10x1/2"Screw (DoorBracketAttachmenttoInsectScreenDoor)
(1) DoorBracketConnectingPin
Tools and Supplies•SafetyGlasses•UtilityKnife•#2PhillipsHeadScrewdriver•Drill/Driver•1/8"and3/16"DrillBits•Hammer•NailsetorPunch
RemoveExcessSealant
DoorHead
AP/PA Double Patio Doors
Rivet
BugSealStrip(1)forDoorHead(2)forDoorJambs
Exterior View
Exterior View
Andersen® Frenchwood® Hinged Patio Doors Hinged Insect Screen
2
• DrillandinsertoneRivetatatime.• DO NOTdriverivetpinbelowrivetheadsurface.
• PositiontopBug Seal Strip,useasatemplatetodrilla1/8"hole,1/4"deep,nearcenter.
• InsertfirstRivet andsetbydrivingrivetpinflushwithsurfaceoftherivethead.Settingfirstrivetwillpreventmisalignment.
• DrillandsetRivets forremainingholes.• PositionsideBug Seal Stripskeepingatightmitered
corner.FollowthisproceduretoattachsideBug Seal Strips startingattophole.
BugSealStrip(1)forDoorHead(2)forDoorJambs
Drilla1/8"hole
1/8"Rivet
Rivetpinisflushwithheadsurface
1. Attach Bug Seal Strips (Continued)
2. Determine Insect Screen Door Swing• SelectdirectiontheInsect Screen Doorwillopen.Left
orrightforAR/ALSingleDoors.ActiveorpassiveforAP/PADoubleDoors.
RightHandSwingLeftHandSwing
ActiveInsectScreen
PassiveInsectScreen
Double Doors - ActiveDoorPanel/PassiveDoorPanel
Single Doors - LeftHandorRightHand Double Doors - PassiveDoorPanel/ActiveDoorPanel
ActiveInsectScreen
PassiveInsectScreen
Exterior View
Drill/Driver
Nailset
Exterior View
Andersen® Frenchwood® Hinged Patio Doors Hinged Insect Screen
3
4. Attach Top Hinge Lower Leaves to Door Frame
• AlignUpper Hinge Leaf'sholeswithholesinInsect Screen Door.
• AttachallUpper Hinge Leaves toInsect Screen Doorusing#8 x 1/2" Screws.ForAP/PA Double Insect Screen Doorsremovepackagedsweeps.
Hinge Assembly
#8x1/2"Screws
UpperHingeLeaf(AttachestoInsectScreenDoorPanel)
LowerHingeLeaf(AttachestoDoorFrame)
HingePin
#8x1/2"Screws
3/16"Rivets
Hinge
Hinge
3. Attach Upper Hinge Leaves to Insect Screen Door(s)
#8x1/2"Screws
• PositionLower Hinge LeafofthetophingeassemblyusingHinge Placement Template.
• Drilltwo3/16"holes,1/4"deep,usingLower Hinge Leafasatemplate.
• AttachLower Hinge Leaf todoorframeusing3/16"Rivets.
• InsertRivetandsetbydrivingrivetpinflushwithsurfaceofrivethead.
HingePlacementTemplate
LowerHingeLeaf
Fittemplatetightintocorner
DO NOTdriverivetpinbelowrivetheadsurface.Productorpropertydamagemayresult.
Exterior View
Exterior View
Andersen® Frenchwood® Hinged Patio Doors Hinged Insect Screen
4
5. Hang Insect Screen Door from Top Hinge Assembly• PositionInsect Screen Door
todoorframewithSplinefacingoutward.
• AlignUpper Hinge LeafwithLower Hinge LeafandinsertHinge Pin.
HangInsectScreenDoorfromTopHingeLowerLeaf
LowerHingeLeaf(AttachedtoDoorFrame)
UpperHingeLeaf (AttachedtoInsectScreenDoorPanel)
• AssembleBottom HingeasshowninStep 5.• PositionBottom Hingeassemblyintodoorframe,use
asatemplatetodrilltwo3/16"holes,1/4"deep.• AttachLower Hinge Leaf todoorframeusing
3/16" Rivets.
• InsertRivetandsetbydrivingtherivetpinflushwithsurfaceofrivethead.
• RepeatSteps 4, 5and6fortheAP/PA Double Insect Screen Doors.
HoldInsectScreenDoorinplaceagainstdoorframe
3/16"Rivets3/16"holestobedrilled
HingePin
UpperHingeLeaf(AttachedtoInsectScreen)
LowerHingeLeaf(Attachedtodoorframe)
6. Attach Bottom Hinge(s) to Door Frame
DO NOTdriverivetpinbelowrivetheadsurface.Productorpropertydamagemayresult.
• ForAR/AL Single Insect Screen Door Installations,skiptoStep 13 forlatchsetinstallation.
• ForAP/PA Double Insect Screen Door Installations,continuetothenextpageforastragalinstallation.
SideofInsectScreenPanelwithSplinefacesoutward
Spline
Exterior View Exterior View
Exterior Views
Andersen® Frenchwood® Hinged Patio Doors Hinged Insect Screen
5
7. Remove Passive Insect Screen Panel and Apply Astragal
8. Reinstall Passive Insect Screen Panel and Adjust Astragal
9. Check/Relocate Position of Strike
• IdentifyPassive Insect Screen Panel. Passive Insect Screen Panel isinfrontofthedoor'sPassive Panel,orSecondary Panel.
• RemovePassive Insect Screen Panel fromthedoorframe.
• PlaceAstragal tighttoPassive Insect Screen Panel,flushwithbottomofInsect Screen Panel.
• Drill1/8"holesthroughinteriorwallonly,usingslotslocatedonAstragalasaguide.Drillholestighttoedgeoftheslotnearesttheflexibleweatherstrip.Repeatforallslottedholes.
• FastenAstragalusing#8 x 1/2" Screws.DO NOTfullytightenscrews.
• ReinstallPassive Insect Screen PanelandcloseInsect Screen Panels.
• AdjustAstragal toachieveanequalspacebetweenAstragalandInsect Screen Panels.
• Tightenscrewswhenadjustmentiscorrect.
• Strikeshouldbelocatedintheupperposition.
• IfStrike islocatedinthelowerposition,loosen,do not removescrews,andrelocatetoupperposition
• Tightenscrews.
Astragal
DrilledHole
#8x1/2"ScrewDrill1/8"hole
(UseAstragalslotasaguide)
PlaceAstragaltighttoPassiveInsectScreenPanel
Equalspaceoneachside
PassiveInsectScreenPanel
ActiveInsectScreenPanel
Strike
StrikeinUpperPosition(correct) StrikeinLowerPosition(incorrect)
Strike
Interior View
AstragalInterior View
Adjustthentightenscrews
Interior View
Andersen® Frenchwood® Hinged Patio Doors Hinged Insect Screen
6
10. Apply and Fasten Head Clip
11. Adjust Astragal Bolts
12. Apply Sill Seal
• CenterHead Clip indoorframeaboveAstragalandholdittighttooutsideleg.
• Mark,thendrill,two1/8"holes,1/4"deep,usingHead Clipasatemplate.
• FastenHead Clip intodoorframeusing1/8"Rivets.Setrivetpinsoitisflushwithrivetheadsurfaceusinganailsetorpunch.
• LoosenAdjustment Screw fortopAstragal Bolt.
• CloseinsectscreenandengageAstragal BoltbyturningAstragal Knob.
• SlideAstragal Bolt intofullyengagedpositionandtightenAdjustment Screw.
• RepeatthisprocedureforbottomAstragal Bolt.
• SnapScrew Cover Plate intoplace(lightlytapifnecessary).
• RemoveprotectiveAdhesive Backer fromSill Seal.• CenterSill SealatbottomofScreen Astragalandpress
firmlyintoposition.
HeadClip
OutsideLeg
1/8"Rivet
AstragalBolt(retracted,ordisengaged)
AstragalBolt(extended,orengaged)
SnapScrewCoverPlateintoplace
Loosenadjustmentscrew Tightenadjustmentscrew
SillSeal
InsectScreenAstragal
HeadClip
AdhesiveBacker
WhenapplyingSillSeal,temperatureofunitsandSillSealmustbe60°F(15.6°C)orwarmer.Insufficientadhesionmayresultifappliedatcoldertemperatures.
Interior View
Interior
Exterior
Interior Views
Screwcoverplatesaresmallpartsand,ifswallowed,couldposeachokinghazardtoyoungchildren.Removeanddisposeofanylooseoreasilyremovedholeplugs.
Andersen® Frenchwood® Hinged Patio Doors Hinged Insect Screen
7
15. Attach Closer Assembly
• AssembleLatch Setcomponentsintopre-drilledlatchholesondoor.Secureusing#6 x 3/4" Bolts.
• Drilla1/8"hole,1/4"deep,usingOutside Handleasaguide.
• FastenOutside Handleusinga#8 x 5/8" Screw.
• PositionHead Jamb Bracket intheupperinsidecornerofdoorframeinsideBug Seal Stripandmarkwheretodrillholes.
• Drillthree1/8"holes,7/8"deep.• AttachHead Jamb Bracketusing
#10 x 7/8" Screws.
• PlaceHold Open WasheronCloser Assembly Plunger Arm.
• AttachCloser Assembly toHead Jamb Bracket (useholeoninteriorsideofbracket)usingHead Jamb Bracket Bushingand#6 x 1/2" Head Jamb Connecting Screw.
UnkeyedSteelSpindlew/Spring
ReleaseButton
OutsideHandle
InsideLatchandOperator
#6x3/4"Bolts
LatchHoles(3)
Drill1/8"hole #8x5/8"Screw
BugSealStrip
LatchStrikePlate
InsideLatchandOperator
HeadJambBracket
PlungerArm
HoldOpenWasher
DoorHead
CloserAssembly InteriorSideBracketHole BushingandScrew
LatchShim(ifneeded)
LatchStrikePlate
13. Assemble and Install Latch Set
14. Attach Head Jamb Bracket
• DO NOTdrillthroughbothsidesofInsectScreenPanel.
• DO NOTovertightenscrews.
CloserAssembly
HeadJambBracket
HeadJambBracket #10x7/8"Screw
• InstallLatch SetonActive Panel.
• PositionLatch Strike PlateondoorframeinproperalignmentwithInside LatchandOperator.
• Markanddrill1/8"holes,1/4"deep,atendsofslotsonLatch Strike Plate farthestfromBug Seal Strip.
• AttachLatch Strike Plateusing#6 x 3/4" Screws.• ApplyLatch Shims ifneeded.
Double Door Installation
Single Door Installation
Single Door Installation
Exterior View
Andersen® Frenchwood® Hinged Patio Doors Hinged Insect Screen
8
• CloseandlatchInsect Screen Door.• AttachDoor Bracket toCloser Assemblywith
Door Bracket Connecting Pin.• PositionDoor BracketandmarkAdjustment
Screwholelocationinscrewslot(sideofslotoppositeConnecting Pin),drillone1/8"hole,1/4"deep.
16. Attach Door Bracket
• AttachDoor Bracketusing#10 x 1/2" Screw inAdjustment Slot.
• AdjustclosingtightnessbymovingDoor Bracket.
• TightenscrewinAdjustment Slot.• Operatedoortoverifythatitcloses
correctly.• Drillremaining1/8"hole,1/4"deepand
completeDoor Bracketattachmentbyfasteningitusinga#10 x 1/2" Screw.
17. Adjust Closing Tightness
• FirstattachDoorBracketwithonescrewinAdjustmentSlot.
• RemainingholewillbedrilledforitsfinalscrewafterDoorCloseradjustmenthasbeenmade.
• ClosingspeedadjustmentismadebytighteningorlooseningActuator Screw.
• Toslow speed,tightenActuator Screw(clockwise).
• Toincrease speed,loosenActuator Screw (counterclockwise).
18. Adjust Closing Speed
AdjustmentSlot
CloserAssembly
BracketConnectingPin
DoorBracket
#10x1/2"Screw
Drill1/8"Hole
Drill1/8"HoleAfterAdjustment
#10x1/2"Screw
ActuatorScrew
Interior View
Interior View
Interior View
PhillipsHeadScrewdriver
Andersen® Frenchwood® Hinged Patio Doors Hinged Insect Screen
9
• AttachInterior Insect Screen Sweep(s) tointeriorsideofInsect Screen Doorusing#8 x 1/2 Screws.
19. Attach and Adjust Interior Sweep(s)
• ApplyCover Platesoveranyunusedlatchsetholes.• ApplyHole Plugs toanyunusedhingeholes.
20. Apply Cover Plates and Plugs
InsectScreenSweep
#8x1/2"Screws
HolePlug
CoverPlates
AP/PA Double Insect Screen Doors Installations OnlyAttachshorterInteriorScreenSweep toInsectScreenDoorPassivePanel.
• DetermineifInsect Screen Sweep isrestingonthetrackcorrectly.Ifadjustmentisneeded,loosenInsect Screen Sweepattachmentscrews,adjustInsect Screen Sweepandtightenscrews.
Interior View
HolePlugsaresmallpartsand,ifswallowed,couldposeachokinghazardtoyoungchildren.Removeanddisposeofanylooseoreasilyremovedholeplugs.
Exterior View
Andersen® Frenchwood® Hinged Patio Doors Hinged Insect Screen
10
“Andersen” y las demás marcas comerciales que aparezcan son marcas de Andersen Corporation. ©2003-2009 Andersen Corporation. Todos los derechos reservados. 0005328 BB Revisado 16/11/09
Guía del mosquitero con bisagraspara la puerta batiente de patio, serie 400, modelo Frenchwood® de Andersen® Puertas simples; puertas de panel de apertura con bisagras a la derecha (AR) y con bisagras a la izquierda (AL) o puertas dobles; panel fijo del panel de apertura (AP) y panel de apertura del panel fijo (PA)
Las instrucciones son para la construcción nueva de paredes con marcos de madera que cuentan con protección contra la intemperie.
Es posible que las instrucciones no sean correctas para todas las instalaciones debido al diseño del edificio, los materiales de construcción o los métodos utilizados, y/o las condiciones de la obra o el edificio. Consulte a un contratista o arquitecto para obtener recomendaciones.
Las bridas en la unidad no proporcionarán por sí mismas un flashing ni sellarán la ventana de manera adecuada. Siga estas instrucciones con detenimiento.
Si tiene alguna pregunta llame al 1-888-888-7020 de lunes a viernes, de 7 a. m. a 7 p. m., hora del centro, y los sábados de 8 a. m. a 4 p. m., hora del centro.
Para obtener más información y/o guías, visite andersenwindows.com.
Deje esta guía con el dueño de la construcción.
Gracias por elegir Andersen.
▶▶ Lea▶la▶guía▶por▶completo▶antes▶de▶comenzar▶la▶instalación.▶Lea▶todas▶las▶advertencias▶y▶precauciones▶durante▶la▶instalación▶de▶la▶unidad.▶
Tenga cuidado al trabajar en lugares elevados y cerca de las aberturas de la unidades. Siga las instrucciones del fabricante para el uso de escaleras y/o andamios. De no hacerlo así, podrían producirse lesiones o la muerte.
Siga las instrucciones del fabricante para el uso de herramientas eléctricas o manuales. Utilice siempre lentes de seguridad. De no hacerlo así, podrían producirse lesiones y/o daños al producto.
Las ventanas y puertas pueden ser pesadas. Utilice técnicas seguras de levantamiento de peso y una cantidad razonable de personas con suficiente fuerza para levantar, cargar e instalar las puertas y ventanas, a fin de evitar lesiones y/o daños al producto.
6'8" 6'11" 8'0"
(1) (1) (1) Guíadeinstalación(1) (1) (1) Mosquiteroparapuertacon
bisagras(1) (1) (1) Placadecorativadel
mosquitero(2) (2) (2) TornilloNo.8x1/2" (Placadecorativainterior)
(2) (2) (2) Cintadeburletecontrainsectos(Laterales)
(1) (1) (1) Cintadeburletecontrainsectos(Partesuperior)
(2) (2) (3) Parteinferiordelabisagra(2) (2) (3) Partesuperiordelabisagra(2) (2) (3) Pasadordebisagra(1) (1) (1) Plantillaparacolocarlas
bisagras(2) (2) (2) Placaderecubrimiento(4) (4) (6) Tapónplásticoparaorificio(4) (4) (6) TornilloNo.8x1/2"
(Partesuperiordelabisagra)
(4) (4) (6) Remachede3/16"x9/32"(Parteinferiordelabisagra)
(13) (13) (13) Remachede1/8"x7/32"(Cintasdeburletecontrainsectos)
Partesdefijacióndelpestillo
(1) Manijaexterior(1) Botóndedesbloqueodelamanijaexterior(1) Operadorypestillointerior(1) Desconecteelhusillodeacero(1) Resortedelhusillo(2) PernoNo.6-32x1-1/4"
(sujecióndelamanija)(1) TornilloNo.8x5/8"(sujecióndelamanija)(1) Placadecierredelpestillo(2) TornilloNo.6x3/4"(sujecióndelaplacadecierre)(2) Cuñadelpestillo
Partesdelcierredelapuerta
(1) Ensamblajedelcierre(1) Arandelaparaelmecanismoparamantener
abiertalapuerta(1) Soportedelajambadecabecera(3) TornilloNo.10x7/8"
(sujecióndelsoportedelajambadecabecera)(1) Casquillodelsoportedelajambadecabecera(1) TornilloNo.6x1/2"
(conexióndelsoportedelajambadecabeceraalcierre)(1) Soportedelapuerta(2) TornilloNo.10x1/2"
(sujecióndelsoportedelapuertaalapuertaconmosquitero)(1) Pasadordeconexióndelsoportedelapuerta
Herramientasysuministros•Lentesdeseguridad•Cuchilladeusogeneral• Destornilladorconcabeza
PhillipsNo.2•Brocaparataladrode1/8"y3/16"• Juegodeclavososacabocados•Martillo•Taladro/destornilladores
PuertaparapatiosimpleAR/AL
Vista exterior
PartesincluidasparaparalaspuertasparapatiosimplesAR/AL
1. Coloque las cintas de burlete contra insectos• Identifiquelacinta de burlete contra insectos parala
cabeceradelapuerta(partesuperior),lascintas de burlete contra insectos paralasjambasdelapuerta(laterales)ylos remaches de1/8"paracolocarenelmarcodelapuerta.
•Retireelexcesodeselladordelasesquinassuperioresdelmarcodelapuertaconunacuchilladeusogeneralparapermitirelfuncionamientocorrectodelmosquitero.
PartesincluidasparalaspuertasdoblesparapatioAP/PA
6'8" 6'11" 8'0"(1) (1) (1) Guíadeinstalación(2) (2) (2) Mosquiteroparapuertaconbisagras(1) (1) (1) Placadecorativaparamosquitero
(paneldeapertura)(1) (1) (1) Placadecorativaparamosquitero
(panelfijo)(16) (16) (20) TornilloNo.8x1/2"(Placadecorativa
interiorypartesuperiordelabisagra)(2) (2) (2) Cintadeburletecontrainsectos(Laterales)(1) (1) (1) Cintadeburletecontrainsectos
(Partesuperior)(4) (4) (6) Parteinferiordelabisagra(4) (4) (6) Partesuperiordelabisagra(4) (4) (6) Pasadordebisagra(1) (1) (1) Plantillaparacolocarlasbisagras(2) (2) (2) Placaderecubrimiento(8) (8) (12) Remachede3/16"x9/32"
(Parteinferiordelabisagra)
(16) (16) (16) Remachede1/8"x7/32"(Cintasdeburletecontrainsectosysujetadordecabecera)
Partesdelastrágalo
(1) Ensamblajedelastrágalo(1) Selladorderiel(2) Recubrimientodetornillos(1) Sujetadordecabecera
Partesdefijacióndelpestillo(1) Manijaexterior(1) Botóndedesbloqueode
lamanijaexterior(1) Operadorypestillointerior(1) Desconecteelhusillodeacero(1) Resortedelhusillo(2) PernoNo.6-32x1-1/4" (Sujecióndelamanija)
(1) TornilloNo.8x5/8" (Sujecióndelamanija)
Partesdelcierredelapuerta
(1) Ensamblajedelcierre(1) Arandelaparaelmecanismopara
mantenerabiertalapuerta(1) Soportedelajambadecabecera(3) TornilloNo.10x7/8"(Sujecióndel
soportedelajambadecabecera)
(1) Casquillodelsoportedelajambadecabecera
(1) TornilloNo.6x1/2"(Conexióndelsoportedelajambadecabeceraalcierre)
(1) Soportedelapuerta(2) TornilloNo.10x1/2"(Sujecióndel
soportedelapuertaalapuertaconmosquitero)
(1) Pasadordeconexióndelsoportedelapuerta
Herramientasysuministros•Lentesdeseguridad•Cuchilladeusogeneral• Destornilladorconcabeza
PhillipsNo.2•Taladro/destornillador• Brocasparataladrode
1/8"y3/16"•Martillo• Juegodeclavososacabocados
Retireelexcesodesellador
Cabeceradelapuerta
PuertasdoblesparapatioAP/PA
Remache
Cintadeburletecontrainsectos(1)paracabeceradelapuerta(2)paralasjambasdelapuerta
Vista exterior
Vista exterior
Puerta batientes para patio modelo Frenchwood® de Andersen® Mosquitero con bisagras
2
• Perforeeinserteunremacheporvez.• NOajusteelpasadordelremachepordebajodela
superficiedelacabezadelremache.
• Coloquelacinta de burlete contra insectossuperioryutilícelacomoplantillaparaperforarunorificiode1/8"de1/4"deprofundidad,cercadelcentro.
• Coloqueelprimerremache yasegúreloajustandoelpasadordelremachealrasconlasuperficiedelacabezadelremache.Alajustarelprimerremache,seevitarádefectosdealineación.
• Perforeyajustelosremaches paralosorificiosrestantes.• Coloquelascintas de burlete contra insectoslaterales
manteniendounaesquinafirmeeingleteada.Sigaesteprocedimientoparacolocarlascintas de burlete contra insectos la tera les desdeelorificiosuperior.
Cintadeburletecontrainsectos(1)paracabecera
delapuerta(2)paralasjambas
delapuerta
Perforeunorificiode1/8"
Remachede1/8"
Elpasadordelremacheseencuentraalrasdelasuperficiedelacabecera
1. Coloque las cintas de burlete contra contra insectos (continuación)
2. Determine la dirección de giro de la puerta con mosquitero• Seleccioneladirecciónenqueseabrirálapuerta con
mosquitero.IzquierdaoderechaparalaspuertassimplesAR/AL.ConaperturaofijoparalaspuertasdoblesAP/PA.
Direccióndegirohacialaderecha
Direccióndegirohacialaizquierda
Mosquiterodeapertura
Mosquiterofijo
Puertasdobles:paneldeaperturadelapuerta/panelfijo
delapuerta
Puertassimples:izquierdaoderecha Puertasdobles:panelfijodelapuerta/paneldeaperturade
lapuerta
Mosquiterodeapertura
Mosquiterofijo
Vista exterior
Taladro/destornillador
Juegodeclavos
Vista exterior
Puerta batientes para patio modelo Frenchwood® de Andersen® Mosquitero con bisagras
3
4. Coloque la parte inferior de la bisagra superior en el marco de la puerta
• Alineelosorificiosdelaparte superior de la bisagraconlosorificiosdelapuerta con mosquitero.
• Coloquetodalaparte superior de la bisagraenlapuerta con mosquiterousandotonillos No. 8 x 1/2".ParalaspuertasdoblesconmosquiteroAP/PAretirelasplacasdecorativasembaladas.
Ensamblajedelabisagra
TornillosNo.8x1/2"
Partesuperiordelabisagra(secolocaenelpaneldelapuertaconmosquitero)
Parteinferiordelabisagra(secolocaenelmarcodelapuerta)
Pasadordebisagra
TornillosNo.8x1/2"
Remachesde3/16"
Bisagra
Bisagra
3. Coloque la parte superior de la bisagra en la(s) puerta(s) con mosquitero
TornillosNo.8x1/2"
• Coloquelaparte inferior de la bisagradelensamblajedelabisagrasuperiorusandounaplantilla para colocar las bisagras.
• Perforedosorificiosde1/4"deprofundidadconunabrocade3/16",utilizandolaparte inferior de la bisagracomoplantilla.
• Coloquelaparte inferior de la bisagraenelmarcodelapuertaconremachesde3/16".
• Coloqueelremacheyasegúreloajustandoelpasadordelremachealrasdelasuperficiedelacabezadelremache.
Plantillaparacolocarlasbisagras
Parteinferiordelabisagra
Coloquelaplantillabienfirmeenlaesquina
NOajusteelpasadordelremachepordebajodelasuperficiedelacabezadelremache.Elproductoolapropiedadpuedensufrirdaños.
Vista exterior
Vista exterior
Puerta batientes para patio modelo Frenchwood® de Andersen® Mosquitero con bisagras
4
5. Cuelgue la puerta con mosquitero del ensamblaje de la bisagra superior• Coloquelapuerta con
mosquiterocontraelmarcodelapuertaconlaestríahaciaafuera.
• Alineelaparte superior de la bisagra conlaparte inferior de la bisagraycoloqueelpasador de la bisagra.
Cuelguelapuertaconmosquiterodelaparteinferiordelabisagrasuperior
Parteinferiordelabisagra(colocadaenelmarcodelapuerta)
Partesuperiordelabisagra (colocadaenelpaneldelapuertaconmosquitero)
• Ensamblelabisagra inferiorcomosemuestraenelPaso5.• Coloqueelensamblajedelabisagra inferiorenelmarco
delapuerta,utilícelocomoplantillaparaperforardosorificiosde1/4"deprofundidadconunabrocade3/16".
• Coloquelaparte inferior de la bisagraenelmarcodelapuertaconremaches de 3/16".
• Coloqueelremacheyasegúreloajustandoelpasadordelremachealrasdelasuperficiedelacabezadelremache.
• RepitalosPasos4,5y6delaspuertasdoblesconmosquiteroAP/PA.
Mantengalapuertaconmosquiteroensulugarcontraelmarcodelapuerta
Remachesde3/16"
Perforarorificiosde3/16"
Pasadordebisagra
Partesuperiordelabisagra(colocadaenelmosquitero)
Parteinferiordelabisagra(colocadaenelmarcodelapuerta)
6. Coloque las bisagras inferiores en el marco de la puerta
NOajusteelpasadordelremachepordebajodelasuperficiedelacabezadelremache.Elproductoolapropiedadpuedensufrirdaños.
• ParalasinstalacionesdepuertassimplesconmosquiteroAR/AL,omitalosdemáspasosypasealPaso13parainstalarlafijacióndelpestillo.
• ParalasinstalacionesdepuertadobleconmosquiteroAP/PA,continúeenlapáginasiguienteparalainstalacióndelastrágalo.
Lateraldelpanelmosquiteroconlasestríashaciaafuera
Estría
Vista exterior Vista exterior
Vistas exteriores
Puerta batientes para patio modelo Frenchwood® de Andersen® Mosquitero con bisagras
5
7. Retire el panel fijo del mosquitero y coloque el astrágalo
8. Vuelva a instalar el panel fijo del mosquitero y ajuste el astrágalo
9. Controle/vuelva a ubicar la posición del cierre
• Identifiqueelpanel fijo del mosquitero.El panel fijo del mosquiteroseencuentraalfrentedelpanel fijoosecundariodelapuerta.
• Retireel panel fijo del mosquiterodelmarcodelapuerta.• Coloqueelastrágalobienfirmealpanel fijo del mosquitero
yalrasdelaparteinferiordelpanel del mosquitero.• Perforeorificiosde1/8"sóloenlaparedinterior,
utilizandolasranurasqueseencuentranenelastrágalocomoguía.Perforeorificioscercadelbordedelaranuramáscercanaalburleteflexible.Repitalasinstruccionesparatodoslosorificiosranurados.
• Ajusteelastrágalocontornillos No. 8 x 1/2".NOajustecompletamentelostornillos.
• Vuelvaainstalarelpanel fijo del mosquiteroycierrelospanelesdelmosquitero.
• Ajusteelastrágalohastalograrespaciosigualesentreelastrágaloylospanelesdelmosquitero.
• Ajustelostornilloscuandoseencuentrecorrectamenteajustado.
• El cierredebeestarubicadoenlaposiciónsuperior.
• Sielcierreestáubicadoenlaposicióninferior,aflojelostornillos,nolosretire,yvuelvaacolocarloenlaposiciónsuperior
• Ajustelostornillos.
Astrágalo
Orificiotaladrado
TornilloNo.8x1/2"Taladreun
orificiode1/8”(Uselaranuradelastrágalocomoguía)
Coloqueelastrágalobienfirmecontraelpanelfijodelmosquitero
Mismoespacioacadalado
Paneldelmosquiterofijo
Paneldeaperturadelmosquitero
Cierre
Cierreenposiciónsuperior(correcto) Cierreenposicióninferior(incorrecto)
Cierre
Vista interior
AstrágaloVista interior
Ajustelostornillosajustados
Vista interior
Puerta batientes para patio modelo Frenchwood® de Andersen® Mosquitero con bisagras
6
10. Coloque y ajuste el sujetador de cabecera
11. Ajuste los pernos del astrágalo
12. Aplique sellador de riel
• Centreelsujetador de cabeceraenelmarcodelapuerta,arribadelastrágaloymanténgalofirmecontralapataexterior.
• Marqueyluegoperforedosorificiosde1/4"deprofundidadconunabrocadede8/16",utilizandoelsujetador de cabeceracomoplantilla.
• Ajusteelsujetador de cabeceraalmarcodelapuertaconremachesde1/8".Coloqueelpasadordelremachealrasdelasuperficiedelacabezadelremache,usandounjuegodeclavososacabocados.
• Aflojeeltornillo de ajustedelperno del astrágalosuperior.
• Cierreelmosquiteroyengancheelperno del astrágalogirandoelpomo del astrágalo.
• Desliceel perno del astrágalohastaqueestécompletamenteencajadoyajusteeltornillo de ajuste.
• Repitaesteprocedimientoparaelperno del astrágaloinferior.
• Ajustela placa de recubrimiento del tornillohastaquequedeensulugar(golpeesuavemente,siesnecesario).
• Retireelsoporte adhesivoprotectordelsellador de riel.• Centreelsellador de rielenlaparteinferiordel
astrágalo del mosquiteroypresioneconfuerzahastacolocarloensulugar.
Sujetadordecabecera
Pataexterior
Remachede1/8"
Pernodelastrágalo (retraídoodesenganchado)
Pernodelastrágalo
(extendidooenganchado)
Ajustelaplacaderecubrimientodeltornillohastaquequedeensulugar
Aflojeeltornillodeajuste Fijeeltornillodeajuste
Selladorderiel
Astrágalodelmosquitero
Sujetadordecabecera
Soporteadhesivo
Alaplicarelselladordelriel,latemperaturadelasunidadesydelselladordelrieldebeserde60°F(15.6°C)omásalta.Esposiblequenoseadhieralosuficientesiseaplicaamenortemperatura.
Vista interior
Interior
Exterior
Vistas interiores
Lasplacasderecubrimientodetornillossonpartespequeñasque,encasodeingesta,puedenrepresentarunriesgodeasfixiaparaniñospequeños.Retireydesechetodoslostaponesparaorificiossueltosoquesepuedanquitarfácilmente.
Puerta batientes para patio modelo Frenchwood® de Andersen® Mosquitero con bisagras
7
15. Coloque el ensamblaje del cierre
• Ensambleloscomponentesdelafijación del pestilloenlosorificiospretaladradosenlapuerta.Asegureconpernos No. 6 x 3/4".
• Taladreunorificiode1/4deprofundidadconunabrocade1/8",utilizandolamanija exteriorcomoguía.
• Ajustelamanija exteriorconuntornillo No. 8 x 5/8".
• Coloqueelsoporte de la jamba de cabeceraenlaesquinainteriorsuperiordelmarcodelapuertadentrodelacinta de burlete contra insectosymarquedondesedebenperforarlosorificios.
• Perforetresorificiosde7/8"deprofundidadconunabrocade1/8".
• Coloqueelsoporte de la jamba de cabeceracontornillos No. 10 x 7/8".
• Coloquelaarandela para el mecanismo para mantener abierta la puertasobreelbrazo del émbolo del ensamblaje del cierre.
• Coloqueelensamblaje del cierreenelsoporte de la jamba de cabecera(useelorificiodellateralinteriordelsoporte)conelcasquillo del soporte de la jamba de cabeceraylos tornillos No. 6 x 1/2" de conexión de la jamba de cabecera.
Desconecteelhusillodeaceroconresorte
Botóndedesbloqueo
Manijaexterior
Operadorypestillointerior
PernosNo.6x3/4"
Orificiosdelpestillo(3)
Taladreunorificiode1/8"
TornilloNo.8x5/8"
Cintadeburletecontrainsectos
Placadecierredelpestillo
Operadorypestillointerior
Soportedelajambadecabecera
Brazodelémbolo
Arandelaparaelmecanismoparamantenerabiertalapuerta
Cabeceradelapuerta
Ensamblajedelcierre
Orificiodelsoportelateralinterior
Casquillosytornillos
Cuñadelpestillo(siesnecesario)
Placadecierredelpestillo
13. Ensamble e instale la fijación del pestillo
14. Coloque el soporte de la jamba de cabecera
• NOperforeambosladosdelpaneldelmosquitero.• NOajustedemasiadolostornillos.
Ensamblajedelcierre
Soportedelajambadecabecera
Soportedelajambadecabecera
TornilloNo.10x7/8"
• Instalelafijación del pestilloenelpanel de apertura.
• Coloquelaplaca de cierre del pestilloenelmarcodelapuertaalineándolacorrectamenteconelpestillo interioryeloperador.
• Marqueyperforeorificiosde1/4"deprofundidadconunabrocade1/8",enlosextremosdelasranurasenlaplaca de cierre del pestillomásalejadadelacinta de burlete contra insectos.
• Coloquelaplaca de cierre del pestillocontornillos No. 6 x 3/4".
• Coloquelascuñas del pestillo,siesnecesario.
Instalacióndepuertadoble
Instalacióndepuertasimple
Instalacióndepuertasimple
Vista exterior
Puerta batientes para patio modelo Frenchwood® de Andersen® Mosquitero con bisagras
8
• Cierreyasegurelapuerta con mosquitero• Coloqueelsoporte de la puertaenelensamblaje
del cierreconunpasador de conexión del soporte de la puerta.
• Coloqueelsoporte de la puertaymarquelaubicacióndelorificiodeltornillo de ajusteenlaranuradeltornillo(lateraldelaranuraopuestaalpasador de conexión),perforeunorificiode1/4"deprofundidadconunabrocade1/8".
16. Coloque el soporte de la puerta
• Coloqueelsoporte de la puertautilizandotornillos No. 10 x 1/2"enlaranura de ajuste.
• Reguleelajustedelcierremoviendoelsoporte de la puerta.
• Ajusteeltornilloenlaranura de ajuste.• Accionelapuertaparaverificarque
cierracorrectamente.• Perforeelotroorificiode1/4"de
profundidadconunabrocade1/8",ycompleteelajustedelsoporte de la puertautilizandountornillo No. 10 x 1/2".
17. Regule el ajuste del cierre
• Coloqueprimeroelsoportedelapuertaconuntornilloenlaranuradeajuste.
• Elotroorificioseperforaráparacolocareltornillofinalluegodequesehayareguladoelajustedelcierredelapuerta.
• Lavelocidaddecierreselograajustandooaflojandoeltornillo accionador.
• Parareducirlavelocidad,ajusteeltornillo accionador(hacialaderecha).
• Paraaumentarlavelocidad,aflojeeltornillo accionador(hacialaizquierda).
18. Ajuste la velocidad de cierre
Ranuradeajuste
Ensamblajedelcierre
Pasadordeconexióndelsoporte
Soportedelapuerta
TornilloNo.10x1/2"
Perforeunorificiode1/8"
Perforeunorificiode1/8"luegodelajuste
TornilloNo.10x1/2"
Tornilloaccionador
Vista interior
Vista interior
Vista interiorDestornilladorconcabezaPhillips
Puerta batientes para patio modelo Frenchwood® de Andersen® Mosquitero con bisagras
9
• Coloquela(s)placa(s) decorativa(s) interior(es) del mosquiteroenellateralinteriordelapuerta con mosquiteroutilizandotornillos No. 8 x 1/2.
19. Coloque y ajuste la(s) placa(s) decorativa(s) interior(es)
• Coloquelasplacas de recubrimientosobrelosorificiosdefijacióndelpestilloquenoseutilicen.
• Apliquelostaponesparaorificiosentodoslosorificiosdelasbisagrasquenoseutilicen.
20. Coloque las placas de recubrimiento y los tapones
Placadecorativadelmosquitero
TornillosNo.8x1/2"
Tapónparaorificio
Placasderecubrimiento
SóloparainstalacionesdepuertasdoblesconmosquiteroAP/PAColoquelapalcadecorativaparamosquiteromáscortaenelpanelfijodelapuertaconmosquitero.
• Determinesilaplaca decorativa del mosquiteroseapoyacorrectamentesobreelbastidor.Sisenecesitaajustar,aflojelostornillosdeajustedelaplaca decorativa del mosquitero,ajustelaplaca decorativa del mosquiteroyajustelostornillos.
Vista interior
Lostaponesparaorificiossonpartespequeñasque,encasodeingesta,puedenrepresentarunriesgodeasfixiaparaniñospequeños.Retireydesechetodoslostaponesparaorificiossueltosoquesepuedanquitarfácilmente.
Vista exterior
Puerta batientes para patio modelo Frenchwood® de Andersen® Mosquitero con bisagras
10