hold down anchor bolts - allfasteners australia
TRANSCRIPT
https://www.allfasteners.com.au/anchor-rods-cast-in
Print Date 02/11/2021 | Page 1 of 2
Whilst every care was taken in preparation of this guide, Allfasteners® accepts no responsibility for the accuracy of the information supplied.Copyright ©2021. The contents of this document are the exclusive copyright of Allfasteners® and may not be reproduced without prior written permission.
1800 255 349 | [email protected]
PDS
Hold Down Anchor Bolts
Hold down bolts (or anchor rods) are a highly versatileproduct and can be configured in multiple ways includedsquare or round hold down bolt cage assemblies. Withseveral raw bar materials & threaded rods available theycan be specified in mild or high tensile steel, or stainless-steel grades from M12 to M42 diameter commonly, orlarger on request.
Anchor plates can be produced and fitted prior to delivery.Your specified shape plates can be tacked welded in placewith nuts if required, or a fully welded.
Provided finished usually in pre-galvanised parts, or fullygalvanised after fabrication, they can also be producedfrom 304 and 316 stainless steel if required.
Typical rod dimension: Diameter (D) x Length (L) x PlatePosition (A) x Thread (T)
Typical plate dimension: Width (F) x Length (C) x PlateThickness (H)
Send us your specs download the RFQ sheet from the tabbelow.
https://www.allfasteners.com.au/anchor-rods-cast-in
1800 255 349 | [email protected]
Print Date 02/11/2021 | Page 2 of 2
Whilst every care was taken in preparation of this guide, Allfasteners® accepts no responsibility for the accuracy of the information supplied.Copyright ©2021. The contents of this document are the exclusive copyright of Allfasteners® and may not be reproduced without prior written permission.
PRODUCT LIST
SKU Bx. Qty. Crt. Qty.
11M-HDB-M
For updates & pricing visit the [email protected]