hollow stem augers
TRANSCRIPT
-
8/6/2019 Hollow Stem Augers
1/47
HOLLOW STEM AUGERS AND CUTTERHEADS
TAPERED &
CHAMFERED
KEY WAYS
TAPERED
HEAT-TREATED
PIN
SAFE-T-DRIVER HOIST
CABLE CONNECTION, FOR
SPT SAMPLING
(SECTION 10)
HEAVY DUTY
GIMBAL
COUPLING(SECTION 3)
HARDFACED
LOCKING BOLTS
(SECTION 2)
AW PIN TO
NW PIN-SUB
(SECTION 6)
SUPER DUTY
BLADE BULLET
CUTTERHEAD
(SECTION 2)
CHOPPING BIT
(SECTION 6)
4-1/4I.D. HSA
(SECTION 3)
IN-HOLE
140# HAMMER
WITH SWIVEL
(SECTION 6)
4-1/4I.D. HSA
AUGER CONNECTOR,
FLANGE MOUNTED
(SECTION 3)
Types and Functions
Mobile introduced hollow stem augers to the drilling
industry in 1954 as an innovative method of casing advancement for
the construction and geotechnical industry. The hollow stem auger is
recognized as a versatile, fast and effective tool for advancing the bore
hole. Once the drilling depth is achieved, the center stem of the auger
is quickly removed which allows working inside the auger using coring
tools, soil sampling equipment, the In-Hole Hammer, insertion of tie
back rods and cables, or environmental monitor well installations.
The hollow stem auger is widely used in conjunction with ground water
monitoring applications and hazardous waste operations. Auger sizes
range from 2-14 to 12-14 (57 to 311mm) I.D., including
Mobiles exclusive 6-58 (168mm) I.D., the industrys preferred size for
4(102mm) monitor and remediation well installations.
Mobiles TRI-LOK, 2-Key and threaded hollow stem augers
utilize slightly tapered concave flights designed to throw cuttings toward
the shaft and are engineered and manufactured to exceed the rugged
demands of todays groundwater monitoring and geotechnical
applications, translating into a lower cost per foot for the drilling
contractor.
Mobiles threaded, water-tight, hollow-stem augers are fully
reversible through the use of a locking wedge that prevents unthreading
down hole. Threaded hollow stems are available in 2-12, 3-38, 4and
6(64, 86, 102 and 152mm) I.D. sizes.
Mobiles premier TRI-LOK series offers
tapered heavy-duty couplings with three chamfered,
deep set, key ways and twin high-tensile lock bolts
with sure grip heads for easy make and break. This
exclusive design provides full torque loading
throughout the heat treated coupling by dispersing
the power equally to the three key ways. This
ensures that the lock bolts only function in vertical
auger removal.
TRI-LOK augers are currently available in 3-14,
4- 14, 6- 58,8 -14, 10-14 and 12-14 (83, 108, 168, 210, 260
and 311mm) I.D.
Mobiles 2-key augers take advantage of all of our
experience with the industrys premiere line TRI-LOK. Slightly
tapered, heat treated pins, deep set durable keyways, coarse thread
bushings will all match up to your existing 2-key hollow stem auger.
Standard duty styles come in 2-14(57mm) and 3-14(83mm) ID sizes,
while heavy duty styles come in 3-14(83mm), 4-14(108mm), and 6-14
(168mm) ID sizes.
For very light duty drilling using low torque machines such as
Mobiles MINUTEMAN
, Mobile manufactures theLITE-FLITE auger in the 2-14(57mm) I.D. size in 26lengths only.
LITE-FLITE augers are designed as lightweight, low cost hollow stem
augers for use with lightweight drilling rigs having a maximum torque
output of not more than 350 ft lbs. LITE-FLITEs 2-14(57mm) I.D. allows
standard penetration testing with 2 (51mm) tools and monitoring
equipment to a maximum of 22.
LITE-FLITE augers represent a practical alternative to the use of
heavier, more expensive hollow-stem augers designed for greater
depths and hole diameters. A 26section of LITE-FLITE weighs in
at a modest 16 lbs.
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
2/47
HOLLOW STEM AUGERS AND CUTTERHEADS
HEX SHANK
CONNECTION
ROD BOLT
AND NUT
CENTER
ROD
HSA
SECTION
HARDFACED
LOCKBOLT
SUPER DUTY
CUTTERHEAD
PILOT BIT
PLUG
DRIVE CAP
ROD TO
CAP
ADAPTER
A wide range of cutterheads for hollow stem augers are
available to suit any type of material being drilled. The BladeType Cutterhead can be used with steel or carbide insertcutter blades designed to perform better in less demanding
formations. The BULLDOG head available in select sizes,makes use of carbide-tipped bullet teeth for coarse
formations. Combining the best features of both,Mobiles Super Duty (SD) Cutterhead meets the
requirements of the widest range of applications and is morethan a match for glacial till, caliche rockand hardpan.
Mobiles exclusive Hard Facing process provideshighly abrasion resistant wear surfaces on each type of
cutter head and lock bolt head. Carbide insert blade andbullet bit life are extended well beyond the normal
replacement point. Research indicates that treatedsurfaces last 50% longer under normal condit ions,
reducing maintenance and therefore resulting in a lowercost per foot drilled.
Since Mobile introduced hollow stems in 1954,their focus has changed to a more environmental concern.
Innovative design, state of the art engineering andmanufacturing processes make Mobile the
recognized industry leader in hollow stem augers andrelated accessories.
Using Hollow-Stem Augers
The hollow-stem auger is used to advance and case thehole simultaneously. It may be used with or without a plugassembly depending on the job requirements. When a
plug is used for the purpose of keeping soil from enteringthe mouth of the lead auger, it is held in place by center
(drill) rod and rod to cap adapter, pinned in the drive cap..
Upon reaching the sampling depth, the center rod with plugand pilot bit attached is removed from the mouth of theauger and replaced by a solid/split barrel soil sampler or
tube sampler, lowered to the bottom of the hole throughthe hollow stem of the auger and sampling or coring is
initiated.
The use of a hollow-stem auger without the plug hasshown that most clay type material will form its own 24
(51102mm) plug which can be driven or washed throughfor sampling or core barrel operations. When flowingsands are encountered, mud may be added inside the
hollow stem to serve as a head to equalize thehydrostatic pressure in lieu of the plug assembly.
Hollow-stems are rotated dry and often to depths of 300
feet (91.4m). Many special applications can be carried outin addition to full range soil sampling. Piezometer and well
point placement, slope indicator placement, cathodicprotection devices, water wells, ground water monitoringwells, diamond drilling, anchor bolt placement as well as
grouting and blast hole loading are some of the jobs thathollow-stem augers facilitate.
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
3/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
67
Lead Section Assembly
Pilot Bits
1
2
4
8
9
10
12
4
13
14
15
3
11
5
15
Cutterheads
3-14(83mm) TRI-LOK AUGERNow with thicker flight and heat-treated pins for extended life.Predominately used for geotechnical applications such as splitspoon sampling. Sizes are identified by hollow stem auger I.D.Order a lead section and the following as needed: Cutterhead,pilot bit, extra auger sections and center rods.Also available in 2-key heavy-duty and standard tapered style.
50(1.5m) LEAD SECTION ASSEMBLY:6-12(165mm) O.D.
Description Lb/Kg Part No.
1-58(41mm) Hex, AW Rod...............126 (57.2) .......61018-031-58(41mm) Hex, AWML Rod..........126 (57.2) .......61018-041-58(41mm) Hex, NW Rod ..............165 (74.8) .......61018-011-58(41mm) Hex, NWML Rod .........165 (74.8) ......61018-02
COMPONENT PARTSRef Description Lb/Kg Part No.
1 1Drive Cap: 1-18(29mm) Hex............... ........1504291 Drive Cap: 1-58(41mm) Hex...........17 (7.7)...1502921 Drive Cap: 2(51mm) Hex ...............22 (10) ...150322
2 Rod Bolt ................................................*........3100-01843 Hex Nut ................................................*........3122-00124 Lockbolt - 1 Reqd ................................*........2171364 Lockbolt - 1 Reqd (Hard Faced)...........*........1503075 Bushing, Field Replaceable....................*........1503085 Bushing, Replaceable ............................*........1503006 Handle ..................................................*........3781-00097 Socket ...................................................*........3782-00168 Adapter: AW Rod to Drive Cap......... 5 (2.3) ...1503108 Adapter: AWML Rod to Drive Cap.... 5 (2.3) ...1503118 Adapter: NW Rod to Drive Cap .........11 (5) ....180049-038 Adapter: NWML Rod to Drive Cap ....11 (5) ....180054-049 Coupling Pin,
Heat-Treated (Repair Only) ...............6 (2.7)....15029610 Auger Section - 30(.91mm) ..........38 (17.2)..150288-0210 Auger Section - 50(1.5m), ............69 (31.3)..15028810 Auger Section - 50(1.5m),
Double Flight ..................................85 (38.6)..150288-0111 Center Rod - 50(1.5m), AW .........22 (10.0)..00160511 Center Rod - 50(1.5m), AWML .....15 (6.8)...00627611 Center Rod - 50(1.5m), NW.........32 (14.5)..00160811 Center Rod - 50(1.5m), NWML....35 (15.9)..00627812 Box Coupling (Repair Only) ..............6 (2.7)....15029513 Plug - 1-18(29mm) Hex to
AW Box ...........................................12 (5.4)...15031213 Plug - 1-18(29mm) Hex
to AWML Box ..................................12 (5.4)...15037913 Plug - 1-18(29mm) Hex
to NW Box.........................................11 (5) ....150306
13 Plug - 1-1
8(29mm) Hexto NWML Box....................................11 (5) ....150377
14 Plug Bolt................................................*........3130-009815 Pilot Bit, 2-Prong, 1-18(29mm) Hex...2 (.9).....20002415 Pilot Bit, 3-Wing, 1-18(29mm) Hex...... * .......150574-01
Coupling, TRI-LOK to CME Pin ........13 (5.9) ....150290Coupling, TRI-LOK to CME Socket ...13 (5.9)....150304Repair Key.............................................* .........150576Clean Out Tap (For Bushing) .................* .........150562O-Ring ..................................................*.........3538-0238
1Not recommended for torque over 8,000 ft-lbs (9,556 Nm).
21
See pages 22 and 23for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
4/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
SUPER DUTY BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-34(197mm) ......20 (8.6) .......61032-01
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-03
Bullet Bit Holder.......................................*..............216044-013-14(83mm) Body w/ Flight Segmentand Bit Holders.....................................................150599
SLIM BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61031-05
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment........................................................1505933-14(83mm) Body w/ Flight Segment.....................150655
Suited for drilling in unconsolidatedformations such as sandy loam andclay. Designed with a smallerdiameter to minimize drag whenpulling out of hole and minimizingmaterial sloughing.
Ideal for consolidated forma-tions, cemented gravel and con-crete. Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed to accept awooden plug or brass guide for
use with the overshot wirelinesystem.
CUTTERHEADS 3-14(83mm) TRI-LOK AUGER
BULLDOG
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm)............ ............61001-10
COMPONENT PARTSDescription Lb/Kg Part No.
Bit.............................................................*..............1502333-14(83mm) Body .................................................150289
BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-34(197mm) ......19 (8.6) .......61031-01
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment........................................................1505933-14(83mm) Body w/ Flight Segment.....................150289
Suited for drilling in unconsolidatedformations such as sandy loam andclay. Designed to accept a woodenplug or brass guide for use with theovershot wireline system.
A tough multi-purpose cutterhead for
full range drilling. Bits are designedfor a uniform wear pattern andlonger service life. Recommended forabrasive conditions and difficult hardformations.
22
Continued on next page
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
5/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEADS 3-14(83mm) TRI-LOK AUGER (cont.)
SUPER DUTY SLIM BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61032-05
COMPONENT PARTS
Description Lb/Kg Part No.Cutterblade w/ Carbide ............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-033-14(83mm) Body w/ Flight Segmentand Bit Holders ...................................... .............150659
SPADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......13 (5.9) .......61036-01
COMPONENT PARTSDescription Lb/Kg Part No.
Spade Bit w/Retainer.................................*..............150194-04Spade Bit Holder ......................................*..............216044-02
Nail ..........................................................*..............1506783-14(83mm) Body ................................... .............150652
Superior cleaning action of spade'scutter blades reduces cutterheadclogging in soft, sticky clays. Bladeangle enhances materialconveyance.
Ideal for consolidated formations,
cemented gravel and concrete.Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed with asmaller diameter to minimizedrag when pulling out of holeand minimizing materialsloughing.
BULLET SPADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61037-01
COMPONENT PARTSDescription Lb/Kg Part No.
Bullet Bit w/Retainer.................................*..............150194-03Spade Bit w/Retainer.................................*..............150194-04Bullet Bit Holder.......................................*..............216044-01
Spade Bit Holder ......................................*..............216044-02Nail ..........................................................*..............150678Flight Segment.......................................... .............150593-013-14(83mm) Body ................................... .............150652-10
BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61038-01
COMPONENT PARTSDescription Lb/Kg Part No.
Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01Flight Segment.......................................... .............150593-013-14(83mm) Body ................................... .............150652-10
For very efficient penetration ingravel, cobble or fracturedformations. Bullet bit anglesmaintain hole gauge and reduceauger wear.
Combines chipping action of bulletbits with the cleaning action ofspade blades. Ideal for shale andglacial tills.
23 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
6/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
4-14 (108mm) TRI-LOK AUGERNow with thicker flight and heat-treated pins for extended life.Often used for 2(51mm) monitoring well installation. Sizes areidentified by hollow stem auger I.D. Order a lead section andthe following as needed: Cutterhead, pilot bit, extra augersections and center rods. Also available in 2-key heavy dutytapered style.
50 (1.5m) LEAD SECTION ASSEMBLY:7-58(194mm) O.D.
Description Lb/Kg Part No.
1-58(41mm) Hex, AW Rod ...............175 (79.4) .......61025-051-58(41mm) Hex, AWML Rod..........175 (79.4) .......61025-061-58(41mm) Hex, NW Rod...............185 (83.9) .......61025-011-58(41mm) Hex, NWML Rod..........185 (83.9) .......61025-022(51mm) Hex, AW Rod...................180 (81.6) ......61025-072(51mm) Hex, AWML Rod..............180 (81.6) .......61025-082(51mm) Hex, NW Rod ..................190 (86.2) .......61025-042(51mm) Hex, NWML Rod .............190 (86.2) .......61025-03
COMPONENT PARTS
Ref Description Lb/Kg Part No.1 1Drive Cap, 1-58(41mm) Hex......24 (10.9)......1504821 Drive Cap, 2(51mm) Hex ...........28 (12.7)......1504902 Rod Bolt ............................................. *............3100-02793 Hex Nut ............................................. *............3122-00124 Lockbolt - 2 Reqd.............................................2171364 Lockbolt - 2 Reqd (Hard Faced)......... *............1503075 Repair Bushing................................... *............1504776 Handle ............................................... *............3781-00097 Socket ................................................ *............3782-00168 Adapter: AW Rod to Drive Cap.......5 (2.3)........1503108 Adapter: AWML Rod to Drive Cap..5 (2.3)........1503118 Adapter: NW Rod to Drive Cap.......11 (5) ........180049-038 Adapter: NWML Rod to Drive Cap..11 (5) ........180054-04
9 Pin Coupling,Heat-treated (Repair Only) ..............9 (4.1) ........15047410 Auger Section: 30(.91mm).........45 (20.4)......150473-0210 Auger Section: 50(1.5m),...........90 (40.8)......15047310 Auger Section: 50(1.5m),
Double Flight...............................110 (49.9).....150473-0111 Center Rod: 50(1.5m), AW..........22 (10) .......00160511 Center Rod: 50(1.5m), AWML ....15 (6.8).......00627611 Center Rod: 50(1.5m), NW........32 (14.5)......00160811 Center Rod: 50(1.5m), NWML...35 (15.9)......00627812 Box Coupling (Repair Only)............9 (4.1)........15047513 Plug: 1-18(29mm) Hex
to AW Box.....................................19 (8.6) .......15049213 Plug: 1-18(29mm) Hex to
AWML Box....................................19 (8.6).......150494
13 Plug: 1-18(29mm) Hexto NW Box ....................................18 (8.2).......150488
13 Plug: 1-18(29mm) Hexto NWML Box ...............................18 (8.2) .......150486
14 Plug Bolt............................................. *............3130-011815 Pilot Bit, 1-18(29mm) Hex,
2-Prong............................................2 (.9).........00430415 Pilot Bit, 1-18(29mm)
Hex, 3-Wing...................................4 (1.8)........150574-02Repair Key.......................................... *............150577Clean Out Tap (for Lockbolt Hole)...... *............150562O-Ring ..................................................*.........3538-0246
1Not recommended for torque over 8,000 ft-lbs (9,556 Nm).
67
Lead Section Assembly
Pilot Bits
1
2
4
8
9
10
12
4
13
14
15
3
11
5
15
Cutterheads
24
See pages 25 and 26for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
7/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEADS 4-14 (108mm) TRI-LOK AUGER
BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
4-14(108mm) ...........9(229mm) ........20 (9.1) .......61031-02
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment.......................................... .............1505864-14(108mm) Body w/ Flight Segment..... .............150596
SUPER DUTY BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
4-14(108mm) ...........9(229mm) ........21 (9.5) .......61032-02
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01
Flight Segment.......................................... .............1505864-14(108mm) Body w/ Flight Segmentsand Bit Holders ...................................... .............150600
Ideal for consolidated forma-tions, cemented gravel and con-crete. Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed to accept awooden plug or brass guide foruse with the overshot wireline
system.
Suited for drilling in unconsolidated
formations such as sandy loam andclay. Designed to accept a woodenplug or brass guide for use with theovershot wireline system.
SLIM BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
4-14(108mm) .........8-12(216mm) ......20 (9.1) .......61031-06
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment.......................................... .............1505864-14(108mm) Body ................................. .............150656
SUPER DUTY SLIM BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.4-14(108mm) .........8-12(216mm) ......20 (9.1) .......61032-06
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/ Carbide.............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01Flight Segment.......................................... .............1505864-14(108mm) Body w/ Flight Segmentand Bit Holders ...................................... .............150660
Ideal for consolidated formations,cemented gravel and concrete.Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed with asmaller diameter to minimizedrag when pulling out of holeand minimizing materialsloughing.
Suited for drilling in unconsolidatedformations such as sandy loam andclay. Designed with a smallerdiameter to minimize drag whenpulling out of hole and minimizingmaterial sloughing.
25
Continued on next page
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
8/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
4-14(108mm) .........8-12(216mm) ......19 (8.6) .......61038-02
COMPONENT PARTSDescription Lb/Kg Part No.
Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01Flight Segment.......................................... .............150586-01
4-14(108mm) Body ................................. .............150651-10
For very efficient penetration ingravel, cobble or fracturedformations. Bullet bit anglesmaintain hole gauge and reduceauger wear.
CUTTERHEADS 4-14 (108mm) TRI-LOK AUGER (cont.)
SPADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
4-14(108mm) .........8-12(216mm) ......16 (7.3) .......61036-02
COMPONENT PARTSDescription Lb/Kg Part No.
Spade Bit w/Retainer.................................*..............150194-04Spade Bit Holder ......................................*..............216044-02Nail ..........................................................*..............1506784-14(108mm) Body ................................. .............150651
BULLET SPADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
4-14(108mm) .........8-12(216mm) ......19 (8.6) .......61037-02
COMPONENT PARTSDescription Lb/Kg Part No.
Bullet Bit w/Retainer.................................*..............150194-03Spade Bit w/Retainer.................................*..............150194-04Bullet Bit Holder.......................................*..............216044-01
Spade Bit Holder ......................................*..............216044-02Nail ..........................................................*..............150678Flight Segment.......................................... .............150586-014-14(108mm) Body ................................. .............150651-10
Combines chipping action of bulletbits with the cleaning action ofspade blades. Ideal for shale andglacial tills.
Superior cleaning action of spade's
cutter blades reduces cutterheadclogging in soft, sticky clays. Bladeangle enhances materialconveyance.
26 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
9/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
67
Lead Section Assembly
Pilot Bits
1
2
4
8
9
10
12
4
13
14
16
3
11
5
18
17
Cutterheads
17
6-58 (168mm) TRI-LOK AUGERNow with thicker flight and heat-treated pins for extended life.The preferred size for 4(102mm) monitoring/recovery wellinstallation. Sizes are identified by hollow stem auger I.D.Order a lead section and the following as needed: Cutterhead,pilot bit, extra auger sections and center rods.
50
(1.5m) LEAD SECTION ASSEMBLY:
10 (254mm) O.D.Description Lb/Kg Part No.
1-58(41mm) Hex, NW Rod ..............280 (127).........61020-011-58(41mm) Hex, NWML Rod .........280 (127) .........61020-022(51mm) Hex, NW Rod.................285 (129.3) .......61020-032(51mm) Hex, NWML Rod............285 (129.3) .......61020-04
COMPONENT PARTSRef Description Lb/Kg Part No.
1 1Drive Cap: 1-58(41mm) Hex.........46 (20.9) ...1503941 Drive Cap: 2(51mm) Hex ..............49 (22.2) ...1504012 Rod Bolt ................................................ * .........3100-02803 Hex Nut ................................................ * .........3122-0012
4 Lockbolt - 2 Reqd .................................*..........2171364 Lockbolt - 2 Reqd (Hard Faced)............ * .........1503075 Repair Bushing ...................................... * .........1504776 Handle .................................................. * .........3781-00097 Socket ................................................... * .........3782-00168 Adapter: NW Rod to Drive Cap..........11(5) ......180049-038 Adapter: NWML Rod to Drive Cap ....5 (2.3) .....180054-049 Pin Coupling,
Heat-Treated (Repair Only)...............15 (6.8) ....15038810 Auger Section: 50(1.5m),.............105 (47.6) ..15039211 Center Rod: 50(1.5m), NW...........32 (14.5) ...00160811 Center Rod: 50(1.5m), NWML......35 (15.9) ...00627812 Box Coupling (Repair Only)..............15 (6.8) ....15039113 Plug: 1-58(41mm)
Hex to NW Box...............................50 (22.7) ...180036-1513 Plug: 1-58(41mm) Hex
to NWML Box .................................50 (22.7) ...180036-1414 Plug Bolt ............................................... * ........3130-017016 Pilot Bit Shank: 1-58(41mm) Hex......3 (1.4) .....00459117 Pilot Bit ..............................................11 (5) ......00495017 Pilot Bit, 1-58(41mm)
Hex, 3-Wing ......................................... * .........150574-0318 Repair Key............................................. * .........150578
Clean Out Tap (For Lockbolt Hole)........ * .........150562O-Ring ..................................................*.........3538-0262
1Not recommended for torque over 8,000 ft-lbs (9,556 Nm).
27
See pages 28 and 29for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
10/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
SLIM BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
6-58(168mm) ..........11(279mm) ......27 (12.2) ......61031-07
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment.......................................... .............1505876-58(168mm) Body ................................. .............150657
SUPER DUTY SLIM BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.6-58(168mm) ..........11(279mm) ......31 (14.1) ......61032-07
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/ Carbide.............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01Flight Segment.......................................... .............1505876-58(168mm) Body w/ Flight Segmentand Bit Holders ...................................... .............150661
Ideal for consolidated formations,cemented gravel and concrete.Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed with asmaller diameter to minimizedrag when pulling out of holeand minimizing materialsloughing.
Suited for drilling in unconsolidatedformations such as sandy loam andclay. Designed with a smallerdiameter to minimize drag whenpulling out of hole and minimizingmaterial sloughing.
CUTTERHEADS 6-58 (168mm) TRI-LOK AUGER
BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
6-58(168mm)........11-12(292mm) .....20 (9.1) .......61031-03
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment.......................................... .............1505876-58(168mm) Body w/ Flight Segment..... .............150597
SUPER DUTY BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
6-58(168mm)........11-12(292mm) ....33 (15.0) ......61032-03
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01
Flight Segment.......................................... .............1505876-58(168mm) Body w/ Flight Segmentsand Bit Holders ...................................... .............150601
Ideal for consolidated forma-tions, cemented gravel and con-crete. Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed to accept awooden plug or brass guide foruse with the overshot wireline
system.
Suited for drilling in unconsolidated
formations such as sandy loam andclay. Designed to accept a woodenplug or brass guide for use with theovershot wireline system.
28
Continued on next page
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
11/47
-
8/6/2019 Hollow Stem Augers
12/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
8-14 (210mm) TRI-LOK AUGERNow with thicker flight and heat-treated pins for extended life.Used for 6(152mm) monitoring/recovery well installation.Sizes are identified by hollow stem auger I.D. Order a leadsection and the following as needed: Cutterhead, pilot bit,extra auger sections and center rods.
50
(1.5m) LEAD SECTIONASSEMBLY: 12 (305mm) O.D.
Description Lb/Kg Part No.
2(51mm) Hex, NW Rod ............326 (147.9) ............61026-032(51mm) Hex, NWML Rod .......326 (147.9) ............61026-04
COMPONENT PARTSRef Description Lb/Kg Part No.
1 Drive Cap: 2(51mm) Hex ..............57 (25.9) ...1505342 Rod Bolt.................................................*.........3100-02893 Hex Nut.................................................* .........3122-00124 Lockbolt - 2 Reqd .................................* .........2171364 Lockbolt - 2 Reqd (Hard Faced) ............* .........1503075 Repair Bushing.......................................*.........1504776 Handle...................................................* .........3781-00097 Socket....................................................* .........3782-00168 Adapter: NW Rod to Drive Cap..........11 (5) .....180049-038 Adapter: NWML Rod to Drive Cap ....5 (2.3).....180054-049 Pin Coupling,
Heat-Treated (Repair Only) ...............18 (8.2) ....15052510 Auger Section: 50(1.5m),.............144 (65.3)..15053111 Center Rod: 50(1.5m), NW...........32 (14.5)...00160811 Center Rod: 50(1.5m), NWML......35 (15.9) ...00627812 Box Coupling (Repair Only)..............18 (8.2)....15052913 Plug: 1-58(41mm) Hex to
NW Box ..........................................34 (15.4) ...180036-1913 Plug: 1-58(41mm) Hex to
NWML Box .....................................34 (15.4)...180036-2014 Plug Bolt ................................................* .........3130-019116 Pilot Bit Shank: 1-58(41mm) Hex......3 (1.4).....00459117 Pilot Bit .............................................8 (3.6).....00718817 Pilot Bit:1-58(41mm) Hex 3-Wing.........* .........150574-0418 Repair Key ............................................. .........150579
Clean Out Tap (For Lockbolt Hole) ........* .........150562O-Ring ..................................................*.........3538-0263
67
Lead Section Assembly
Pilot Bits
1
2
4
8
9
10
12
4
13
14
16
3
11
5
18
17
Cutterheads
17
210
See pages 211 and 212for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
13/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEADS 8-14 (210mm) TRI-LOK AUGER
BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
8-14(210mm)........14-14(362mm) ......44(20) ........61031-04
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment.......................................... .............1505938-14(210mm) Body w/ Flight Segment..... .............150598
SUPER DUTY BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
8-14(210mm)........14-14(362mm) ....33 (15.0) ......61032-03
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01
Flight Segment.......................................... .............1505888-14(210mm) Body w/ Flight Segmentsand Bit Holders ...................................... .............150598
Ideal for consolidated forma-tions, cemented gravel and con-crete. Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed to accept awooden plug or brass guide foruse with the overshot wireline
system.
Suited for drilling in unconsolidated
formations such as sandy loam andclay. Designed to accept a woodenplug or brass guide for use with theovershot wireline system.
SLIM BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
8-14(210mm)........13-34(349mm) ....33 (15.0) ......61031-08
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment.......................................... .............1505888-14(168mm) Body ................................. .............150658
SUPER DUTY SLIM BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.8-14(210mm)........13-34(349mm) ....31 (14.1) ......61032-07
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/ Carbide.............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01Flight Segment.......................................... .............1505888-14(210mm) Body w/ Flight Segmentand Bit Holders ...................................... .............150662
Ideal for consolidated formations,cemented gravel and concrete.Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed with asmaller diameter to minimizedrag when pulling out of holeand minimizing materialsloughing.
Suited for drilling in unconsolidatedformations such as sandy loam andclay. Designed with a smallerdiameter to minimize drag whenpulling out of hole and minimizingmaterial sloughing.
211
Continued on next page
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
14/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
8-14(210mm)..........11(279mm) ......36 (16.3) ......61038-04
COMPONENT PARTSDescription Lb/Kg Part No.
Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01Flight Segment.......................................... .............150588-01
8-14(210mm) Body ................................. .............150654-10
For very efficient penetration ingravel, cobble or fracturedformations. Bullet bit anglesmaintain hole gauge and reduceauger wear.
CUTTERHEADS 8-14 (210mm) TRI-LOK AUGER (cont.)
SPADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
8-14(210mm)........13-34(349mm) ....33 (15.0) ......61036-04
COMPONENT PARTSDescription Lb/Kg Part No.
Spade Bit w/Retainer.................................*..............150194-04Spade Bit Holder ......................................*..............216044-02Nail ..........................................................*..............1506788-14(210mm) Body ................................. .............150654
BULLET SPADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
8-14(210mm)........13-34(349mm) ......44(20) ........61037-04
COMPONENT PARTSDescription Lb/Kg Part No.
Bullet Bit w/Retainer.................................*..............150194-03Spade Bit w/Retainer.................................*..............150194-04Bullet Bit Holder.......................................*..............216044-01
Spade Bit Holder ......................................*..............216044-02Nail ..........................................................*..............150678Flight Segment.......................................... .............150588-018-12(210mm) Body ................................. .............150654-10
Combines chipping action of bulletbits with the cleaning action ofspade blades. Ideal for shale andglacial tills.
Superior cleaning action of spade's
cutter blades reduces cutterheadclogging in soft, sticky clays. Bladeangle enhances materialconveyance.
212 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
15/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
10-14(260mm) TRI-LOK AUGERNow with thicker flight and heat-treated pins for extended life.Used for 4(102mm) or larger monitoring/recovery wellinstallation. Sizes are identified by hollow stem auger I.D.Order a lead section and the following as needed: Cutterhead,pilot bit, extra auger sections and center rods.
50(
1.5m) LEAD SECTION ASSEMBLY:14-14(362mm) O.D.Description Lb/Kg Part No.
2(51mm) Hex, NW Rod.....................470 (213.2)..61034-022(51mm) Hex, NWML Rod................470 (213.2)..61034-01
COMPONENT PARTSRef Description Lb/Kg Part No.
1 Adapter, Auger 1-58(41mm) Hexto 2(51mm) Hex Socket..................11(5.0) .....004643
2 Drive Cap: 2(51mm) Hex .............70 (31.8)....1506183 Rod Bolt................................................* ..........3100-02794 Rod Nut ................................................* ..........3122-00125 Lockbolt - 2 Reqd.................................*..........150666-01
6 Adapter: NW Rod to Drive Cap ........5 (2.3)......180049-036 Adapter: NWML Rod toDrive Cap .........................................5 (2.3)......180054-04
7 Auger Section: 50(1.5m), ...........256 (116.1)..150543-028 Center Rod: 50(1.5m),
NW Rod .........................................32 (14.5)....0016088 Center Rod: 50(1.5m),
NWML Rod ....................................35 (15.9)....0062789 Plug-Pilot Bit Combo w/ Ten (10)
Bullet Bits and Blocks NW Rod.......48 (21.8)....150565-049 Plug-Pilot Bit Combo w/ Ten (10)
Bullet Bits and Blocks NWML Rod..25 (11.3)....150565-0310 Bit Block............................................... * .........216044-0111 Bullet Bit............................................... * .........150194-03
12 Repair Bushing ..................................... * .........15066513 Repair Box......................................35 (15.9)....15061014 Repair Pin.......................................28 (12.7)....15061115 Handle ................................................. * .........3781-001016 Socket................................................... * .........3818-002017 NW Rod Box Center Plug ...............93 (42.2)....180036-2717 NWML Rod Box Center Plug ..........92 (41.7)....180036-2518 Bolt....................................................... * .........3130-016319 3 Wing Pilot Bit ..............................24 (10.9)....150574-0520 Repair Key ............................................ ..........150614
213
See page 214for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
16/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEADS 10-14(260mm) TRI-LOK AUGER
BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
10-14(260mm)........15(381mm) ......56 (25.4) ......61031-11
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment.......................................... .............150681-0110-14(260mm) Body w/ Flight Segment... .............150699
SUPER DUTY BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
10-14(260mm)........15(381mm) ......56 (25.4) ......61032-11
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01
Flight Segment.......................................... .............150681-0110-14(260mm) Body w/ Flight Segmentsand Bit Holders ...................................... .............150698
Ideal for consolidated forma-tions, cemented gravel and con-crete. Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed to accept awooden plug or brass guide foruse with the overshot wireline
system.
Suited for drilling in unconsolidated
formations such as sandy loam andclay. Designed to accept a woodenplug or brass guide for use with theovershot wireline system.
214 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
17/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
12-14(311mm) TRI-LOK AUGERNow with thicker flight and heat-treated pins for extended life.Used for 4(102mm) or larger monitoring/recovery wellinstallation. Sizes are identified by hollow stem auger I.D.Order a lead section and the following as needed: Cutterhead,pilot bit, extra auger sections and center rods.
50
(1.5m) LEAD SECTION ASSEMBLY:17(432mm) O.D.Description Lb/Kg Part No.
2(51mm) Hex, NWML Rod...............470 (213.2)..61035-01
COMPONENT PARTSRef Description Lb/Kg Part No.
1 Drive Cap: 2(51mm) Hex.............70 (31.8) ....1506432 Rod Bolt ...............................................* ..........3100-0242
2A Rod Nut................................................* ..........3122-00123 Lockbolt - 2 reqd .................................* ..........150666-014 Adapter: NWML Rod to Drive Cap...5 (2.3) ......180054-045 Auger Section: 50(1.5m), ..........256 (116.1) ..150572-026 Center Rod: 50(1.5m),
NWML Rod ....................................35 (15.9) ....0062787 Plug-Pilot Bit Combo w/ Ten (10)Bullet Bits and Blocks NWML Rod.25 (11.3) ....150565-05
8 Bit Block .............................................. *..........216044-019 Bullet Bit.............................................. *..........150194-03
12 Repair Bushing..................................... *..........15066513 Repair Box .....................................35 (15.9) ....15063914 Repair Pin ......................................28 (12.7) ....15064015 Handle................................................. *..........3781-001016 Socket.................................................. *..........3818-002017 NWML Rod Box Center Plug..........92 (41.7) ....180036-2518 Bolt...................................................... *..........3130-016319 3 Wing Pilot Bit..............................24 (10.9)....150574-0520 Repair Key ............................................ ..........150642
215
See page 216for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
18/47
-
8/6/2019 Hollow Stem Augers
19/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
Lead Section Assembly
Cutterhead
Pilot Bit
5
3
1
2
4
7
8
9
10
11
4
12
13
14
6
2-14(57mm) LITE-FLITE AUGERLITE-FLITE augers are designed to fill the need for alightweight, low cost hollow stem auger for use withlightweight drilling rigs having a maximum torque output ofnot more than 3750 ft-lbs. For stronger machines, usestandard duty 2-14I.D. 2-key HSA. LITE-FLITEs 2-14(57mm)I.D. will allow monitor well placement and standard
penetration testing with 2(51mm) tools and equipment to amaximum of 22.5 (6.8m). Sizes are identified by hollow stemauger I.D. Order a lead section and the following as needed:Cutterhead, pilot bit, extra auger sections and center rods.
LEAD SECTION ASSEMBLY: 4-38(111mm) O.D.Description Lb/Kg Part No.
26(762mm), 1316(21mm)Hex, AWML Rod ............................38 (17.2)..............61023-0126(762mm), 1316(21mm)Hex, EW Rod..................................35 (15.9)..............61023-04
COMPONENT PARTSRef Description Lb/Kg Part No.
1 Drive Cap 1316(21mm) Hex ...............6 (2.7).....1504041 Drive Cap 1-18(29mm) Hex ..............6 (2.7).....1503992 Rod Bolt................................................. * ........3100-01283 Hex Nut................................................. * ........3122-00124 Lock Bolt Without Hard Facing .........................2171354 Lock Bolt With Hard Facing................... * ........1503835 Handle, 12(13mm) Sq
Drive Flex x 16(457mm)..................3 (1.4).....3781-00096 Socket, 1516(24mm) Hex ....................... * ........3782-00137 Adapter: EW Rod to Drive Cap............1 (.5)......1504027 Adapter: AW Rod to Drive Cap ...........2 (.9)......1503107 Adapter: AWML Rod to Drive Cap ......2 (.9)......1503118 Pin Coupling (Repair Only) ................3 (1.4).....1503849 Auger Section: 26(762mm).............17 (7.7)....150414
10 Center Rod: 26(762mm), AWML.....7 (3.2).....15041610 Center Rod: 26(762mm), EW ..........7 (3.2).....00175311 Box Coupling (Repair Only) ...............3 (1.4).....15038512 Plug: 1316(21mm) Hex
Socket to EW Box ...............................4 (1.8) .....180448-0112 Plug: 1316(21mm) Hex
Socket to AW Box ..............................4 (1.8).....180448-0212 Plug: 1316(21mm) Hex
Socket to AWML Box .........................4 (1.8).....180448-0313 Plug Bolt ................................................ * ........3130-006214 Pilot Bit: 1316(21mm) Hex...................1 (.5)......004981
217
See page 218for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
20/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEAD 2-14(57mm) LITE-FLITE AUGER
CUTTERHEAD
Description Lb/Kg Part No.
4-38(111mm) O.D. withCarbide insert bits..................................3 (1.4).........150397
COMPONENT PARTSDescription Lb/Kg Part No.
2-14(57mm) Body ...............................................150387
Carbide Insert .......................................................180462-02Carbide Insert .......................................................180462-03Carbide Insert .......................................................180462-04
218 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
21/47
-
8/6/2019 Hollow Stem Augers
22/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEAD 2-12(64mm) THREADED AUGER
BLADE
CUTTERHEAD
Description Lb/Kg Part No.
8(203mm) O.D., Blade Type...............21(9.5) ........004282
COMPONENT PARTSDescription Lb/Kg Part No.
Cutter Blade w/Carbide.........................................004303Blade Bolt .............................................................0012932-12(64mm) Body................................................004831Locking Wedge .....................................................004070-10
Suited for drilling in unconsolidated
formations such as sandy loam andclay. Designed to accept a woodenplug or brass guide for use with theovershot wireline system.
220 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
23/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
Lead Section Assembly
1
2
3
5
6
8
10
14
15
13
11
7
4
12
9
Cutterhead
Pilot Bits 18
1917
3-38(86mm) THREADED AUGERAugers are furnished with hardfaced flight edges and lockingwedges. Sizes are identified by hollow stem auger I.D. Order alead section and the following as needed: Break-out adapter,cutterhead, pilot bit, extra auger sections and center rods.
50(1.5m) LEAD SECTION ASSEMBLY:
8-14(210mm) O.D.Description Lb/Kg Part No.
1-58(41mm) Hex, AW Rod..............140 (63.5) ..........61003-011-58(41mm) Hex, AWML Rod.........140 (63.5) ..........61003-021-58(41mm) Hex, NW Rod...............150 (68) ...........61003-041-58(41mm) Hex, NWML Rod..........150 (68) ...........61003-052(51mm) Hex, AW Rod .................142 (64.4)..........61003-062(51mm) Hex, AWML Rod ............142 (64.4)..........61003-072(51mm) Hex, NW Rod.................153 (69.4)..........61003-092(51mm) Hex, NWML Rod............153 (69.4) ..........61003-10
COMPONENT PARTSRef Description Lb/Kg Part No.
1 Auger Break-out Adapter: 1-58(41mm) Hex ...............................25 (11.3) .....005286
1 Auger Break-out Adapter: 2(51mm) Hex ...............................27 (12.2) .....005287
2 Drive Cap: 1-58(41mm) Hex........11 (5)........0050022 Drive Cap: 2(51mm) Hex..........13 (5.9) ......0050033 Rod Bolt........................................... * ...........3100-022224 Hex Nut ........................................... * ...........3122-00125 Adapter: AW Rod to Drive Cap ....5 (2.3) .......0010305 Adapter: AWML Rod to
Drive Cap.....................................5 (2.3) .......0070145 Adapter: NW Rod to
Drive Cap .....................................11 (5) ........0035115 Adapter: NWML Rod to
Drive Cap .....................................11 (5) ........0069506 Pin Coupling (Repair Only) ..........9 (4.1) .......0053567 Wedge Pocket (Pin Coupling)........... * ...........0069048 Auger Section: 30(914mm)......48 (21.8) .....150363-038 Auger Section: 50(1.5m)..........83 (37.6) .....0041478 Auger Section: 50(1.5m)
Double Flight ............................115 (52.2) ....150338-019 Center Rod: 50(1.5m), AW .......22 (10).......0016059 Center Rod: 50
(1.5m), AWML ............................15 (6.8) ......0062769 Center Rod: 50(1.5m), NW .....32 (14.5) .....0016089 Center Rod: 50
(1.5m), NWML.............................33 (15).......00627810 Box Coupling (Repair Only) .........9 (4.1) .......005357
11 Locking Wedge ................................ * ...........00407012 Wedge Pocket(Box Coupling)................................. * ...........005633
13 Drift Punch....................................2 (.9) ........00603814 Plug: 1-18(29mm)
Hex to AW ..................................17 (7.7) ......180036-0314 Plug: 1-18(29mm)
Hex to AWML.............................17 (7.7) ......00701314 Plug: 1-18(29mm)
Hex to NW.................................30 (13.6) .....180036-06
221
Continued on next page
See page 222for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
24/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEAD -3-38(86mm) THREADED AUGER
BLADE AND BULLET
CUTTERHEAD
Description Lb/Kg Part No.
9(229mm) O.D. Blade Type................17 (7.7)........61031-109(229mm) O.D. Super Duty Type .......21 (9.5) ........61032-10
COMPONENT PARTSDescription Lb/Kg Part No.Cutter Blade w/Carbide.........................................004303Blade Bolt .............................................................0012933-38(86mm) Body................................................150620Locking Wedge .....................................................004070-10Bullet Cutter with Retainer ....................................150194-03Block Holder for Bullet Cutter ...............................216044-01
COMPONENT PARTS (cont.)Ref Description Lb/Kg Part No.
14 Plug: 1-18(29mm)Hex to NWML............................30 (13.6) .....006963
15 Plug Bolt .......................................... * ...........3130-009817 Pilot Bit: 1-18(29mm) Hex
(Soft Formation).............................2 (.9) ........00550518 Pilot Bit: 2-Prong, 1-18
(29mm) Hex (Hard Formation) ......1 (.5) ........20002419 Pilot Bit, 3-Wing, 1-18(29mm) Hex.... * ...........
222 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
25/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
Lead Section Assembly
1
2
3
5
6
8
10
14
15
13
11
7
4
12
9
Cutterhead
Pilot Bits 18
19
1617
4(102mm) THREADED AUGERAugers are furnished with hardfaced flight edges and lockingwedges. Sizes are identified by hollow stem auger I.D. Order alead section and the following as needed: Break-out adapter,cutterhead, pilot bit, extra auger sections and center rods.
50(1.5m) LEAD SECTION ASSEMBLY:
8-1
2
(216mm) O.D.Description Lb/Kg Part No.1-58(41mm) Hex, NW Rod ...........154 (69.9) ...........61006-021-58(41mm) Hex, NWML rod .......155 (70.3) ...........61006-032(51mm) Hex, NW Rod ...............157 (71.2) ...........61006-052(51mm) Hex, NWML Rod..........157 (71.2) ...........61006-06
COMPONENT PARTSRef Description Lb/Kg Part No.1 Auger Break-out Adapter:
1-58(41mm) Hex.......................29 (13.2) ......0052901 Auger Break-out Adapter:
2(51mm) Hex...........................30 (13.6) ......0052912 Drive Cap: 1-58(41mm) Hex ......16 (7.3) .......0012182 Drive Cap: 2(51mm) Hex..........16 (7.3) .......004617
3 Rod Bolt ...........................................*.............3100-02794 Hex Nut ...........................................*.............3122-00125 Adapter: NW Rod to
Drive Cap .....................................11 (5) .........0035115 Adapter: NWML Rod to
Drive Cap .....................................11 (5) .........0069506 Coupling Pin (Repair Only) .........10 (4.5) .......0056897 Wedge Pocket (Pin Coupling)........... * ............0069048 Auger Section: 50(1.5m)..........90 (40.8) ......001212
8A Auger Section: 50(1.5m)Double Flight ..................................................150515-01
9 Center Rod: 50(1.5m) NW ......32 (14.5) ......0016089 Center Rod: 50(1.5m)
NWML.......................................35 (15.9) ......00627810 Box Coupling (Repair Only) ........10 (4.5) .......005690
11 Locking Wedge ................................ * ............00407012 Wedge Pocket (Box
Coupling)......................................... * ............00563313 Drift Punch....................................2 (.9) .........00603814 Plug: 1-18(29mm) Hex to
NW Box .....................................32 (14.5) ......180036-2214 Plug: 1-18(29mm) Hex
to NWML Box............................32 (14.5) ......00701915 Plug Bolt .......................................... * ............3130-011816 Pilot Bit, 3-Wing, 1-18(29mm) Hex.... * ...........17 Pilot Bit: 1-18(29mm) Hex............2 (.9) .........00143718 Pilot Bit Shank: 1-18
(29mm) Hex ..................................2 (.9) .........00458819 Pilot Bit, hard formation, carbide..5 (2.3) ........004948
223
See page 224for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
26/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEAD 4(102mm) THREADED AUGER
BLADE
CUTTERHEAD
Description Lb/Kg Part No.
11(279mm) O.D., Blade Type............23 (10.4) .......61031-13
COMPONENT PARTSDescription Lb/Kg Part No.
Cutter Blade w/Carbide.........................................004303Blade Bolt .............................................................0012934(102mm) Body..................................................217965Locking Wedge .....................................................004070-10
Suited for drilling in unconsolidated
formations such as sandy loam andclay. Designed to accept a woodenplug or brass guide for use with theovershot wireline system.
224 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
27/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
Lead Section Assembly
1
2
3
5
6
8
10
14
15
13
11
7
4
12
9
Cutterhead
Pilot Bits 18
19
1617
6(152mm) THREADED AUGERAugers are furnished with hardfaced flight edges and lockingwedges. Sizes are identified by hollow stem auger I.D. Order alead section and the following as needed: Break-out adapter,cutterhead, pilot bit, extra auger sections and center rods.
50(1.5m) LEAD SECTION ASSEMBLY:
11(279mm) O.D.Description Lb/Kg Part No.
1-58(41mm) Hex, NW Rod ...........232 (105.2)..........61009-021-58(41mm) Hex, NWML Rod......233 (105.7)..........61009-032(51mm) Hex, NW Rod ...............234 (106.1)..........61009-052(51mm) Hex, NWML Rod..........235 (106.6)..........61009-06
COMPONENT PARTSRef Description Lb/Kg Part No.
1 Auger Break-out Adapter:1-58(41mm) Hex...........................48 (21.8) ....005294
1 Auger Break-out Adapter:2(51mm) Hex...............................49 (22.2) ....005295
2 Drive Cap: 1-58(41mm) Hex...........22 (10)......0012202 Drive Cap: 2(51mm) Hex.............23 (10.4) ....0046193 Rod Bolt ..............................................* ..........3100-02804 Hex Nut ...............................................* ..........3100-02805 Adapter: NW Rod to Drive Cap ........11 (5).......0035115 Adapter: NWML Rod To
Drive Cap .........................................11 (5) .......0069506 Pin Coupling (Repair Only) .............17 (7.7) .....0056937 Wedge Pocket (Pin Coupling)............... * ..........0069048 Auger Section: 50(1.5m)..............141 (64).....0012149 Center Rod: 50(1.5m), NW .........32 (14.5) ....0016089 Center Rod: 50(1.5m), NWML ....25 (11.3) ....00627810 Box Coupling (Repair Only) ............15 (6.8) .....00569411 Locking Wedge .................................... * ..........00407012 Wedge Pocket (Box Coupling).............. * ..........00563313 Drift Punch........................................2 (.9) .......00603814 Plug: 1-58(41mm) Hex
to NW Box .....................................35 (15.9) ....180036-2414 Plug: 1-58(41mm) Hex
to NWML Box ................................35 (15.9) ....00694915 Plug Bolt .............................................. * ..........3130-0163
Cutterhead Body: BladeType (3 Blades Reqd).....................25 (11.3) ....001280Cutter Blade: Carbide Insert...............1 (.5) .......004303Capscrew (1 reqd per blade) ............... * ..........001293
16 Pilot Bit, 3-Wing, 1-18(29mm) Hex.... * ...........17 Pilot Bit: 1-58(41mm) ......................4 (1.8) ......00550918 Shank Pilot Bit: 1-58
(41mm) Hex ......................................2 (.9) .......00459119 Pilot Bit, hard formation, carbide ......11 (5).......004950
225
See page 226for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
28/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEAD 6(152mm) THREADED AUGER
BLADE
CUTTERHEAD
Description Lb/Kg Part No.
13-14(337mm), Blade Type ..................44(20).........61031-14
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterhead w/Carbide ...........................................004303Blade Bolt .............................................................0012936(152mm) Body..................................................001280Locking Wedge .....................................................004070-10
Suited for drilling in unconsolidated
formations such as sandy loam andclay. Designed to accept a woodenplug or brass guide for use with theovershot wireline system.
226 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
29/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
67
Lead Section Assembly
Pilot Bit
1
2
4
8
9
10
12
4
13
14
15
3
11
5
16
Cutterheads
2-14(57mm) 2-KEYSTANDARD DUTY AUGERPredominately used for geotechnical applications such as splitspoon sampling. Sizes are identified by hollow stem auger I.D.Order a lead section and the following as needed: Cutterhead,pilot bit, extra auger sections and center rods.
50(1.5m) LEAD SECTION ASSEMBLY:5-58(143mm) O.D.Description Lb/Kg Part No.
1-18(29mm) Hex, AW Rod................. ...................61021-071-18(29mm) Hex, AWML Rod............ ...................61021-081-58(41mm) Hex, AW Rod................. ...................61021-091-58(41mm) Hex, AWML Rod............ ...................61021-10
COMPONENT PARTSRef Description Lb/Kg Part No.
1 Drive Cap: 1-18(29mm) Hex .......................1507171 Drive Cap: 1-58(41mm) Hex.......................1507322 Hex Bolt .......................................................3100-01283 Hex Nut........................................................3122-0012
4 Lockbolt .......................................................150712-075 Bushing ........................................................218889-046 Handle ................................................ .........3781-00097 Socket...........................................................3782-00168 Rod to Cap Adapter AW ...............................0010308 Rod to Cap Adapter AWML................. .........0070149 Pin Coupling,
Heat-Treated (Repair Only) ...........................150712-0110 Auger 5 (1.5mm) Lg .....................................15071211 Center Rod AW ............................................00160511 Center Rod AWML .......................................00627612 Box Coupling (Repair Only)................. .........150712-0213 Center Plug AW Connection.........................180448-0213 Center Plug AWML Connection....................180448-03
14 Plug Bolt.......................................................3130-006215 Pilot Bit.........................................................00498116 Repair Key........................................... .........150577
O-Ring................................................. .........3538-0232
227
See page 229for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
30/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEAD 2-14(57mm)2-KEY STANDARD DUTY AUGER
SPADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
2-14(57mm) ...........6-12(165mm) ........... ............61036-14
COMPONENT PARTSDescription Lb/Kg Part No.
Spade Bit w/Retainer.................................*..............150194-04Spade Bit Holder ......................................*..............216044-02Nail ..........................................................*..............1506782-14(57mm) Body ................................... .............150718-01
Superior cleaning action of spade's
cutter blades reduces cutterheadclogging in soft, sticky clays. Bladeangle enhances materialconveyance.
228 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
31/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
67
Lead Section Assembly
Pilot Bit
1
2
4
8
9
10
12
4
13
14
15
3
11
5
Cutterheads
3-14(83mm) 2-KEYSTANDARD DUTY AUGERPredominately used for geotechnical applications such as splitspoon sampling. Sizes are identified by hollow stem auger I.D.Order a lead section and the following as needed: Cutterhead,pilot bit, extra auger sections and center rods.
Also available in 2-key heavy-duty and TRI-LOK.50(1.5m) LEAD SECTION ASSEMBLY:
6-12(165mm) O.D.Description Lb/Kg Part No.
1-58(41mm) Hex, AW Rod................. ...................61049-011-58(41mm) Hex, AWML Rod............ ...................61049-021-58(41mm) Hex, NW Rod ................ ...................61049-031-58(41mm) Hex, NWNL Rod............ ...................67049-042(51mm) Hex, AW Rod..................... ...................61049-052(51mm) Hex, AWML Rod................ ...................61049-062(51mm) Hex, NW Rod .................... ...................61049-072(51mm) Hex, NWML Rod............... ...................61049-08
COMPONENT PARTSRef Description Lb/Kg Part No.
1 Drive Cap: 1-18(29mm) Hex ................ ........1507311 Drive Cap: 1-58(41mm) Hex...........17 (7.7)...1507301 Drive Cap: 2(51mm) Hex ...............22 (10) ...1507322 Rod Bolt ................................................*........3100-01843 Hex Nut ................................................*........3122-00124 Lockbolt - 1 Reqd ................................*........150712-064 Lockbolt - 1 Reqd (Hard Faced)...........*........150712-075 Bushing (Repair Only) ...........................*........218889-046 Handle ..................................................*........3781-00097 Socket ...................................................*........3782-00168 Adapter: AW Rod to Drive Cap......... 5 (2.3) ...1503108 Adapter: AWML Rod to Drive Cap.... 5 (2.3) ...1503118 Adapter: NW Rod to Drive Cap .........11 (5) ....180049-03
8 Adapter: NWML Rod to Drive Cap ....11 (5) ....180054-049 Coupling Pin,
Heat-Treated (Repair Only) ...............6 (2.7)....150711-0110 Auger Section - 50(1.5m) .............69 (31.3)..15071111 Center Rod - 50(1.5m), AW .........22 (10.0)..00160511 Center Rod - 50(1.5m), AWML .....15 (6.8)...00627611 Center Rod - 50(1.5m), NW.........32 (14.5)..00160811 Center Rod - 50(1.5m), NWML....35 (15.9)..00627812 Box Coupling (Repair Only) ..............6 (2.7)....150711-0213 Plug - 1-18(29mm) Hex to
AW Box ...........................................12 (5.4)...15031213 Plug - 1-18(29mm) Hex
to AWML Box ..................................12 (5.4)...15037913 Plug - 1-18(29mm) Hex
to NW Box.........................................11 (5) ....15030613 Plug - 1-18(29mm) Hex
to NWML Box....................................11 (5) ....15037714 Plug Bolt................................................*........3130-009815 Pilot Bit, 2-Prong, 1-18(29mm) Hex...2 (.9).....20002415 Pilot Bit, 3-Wing, 1-18(29mm) Hex...... * .......150574-01
Coupling, TRI-LOK to CME Pin ........13 (5.9) ....150290Coupling, TRI-LOK to CME Socket ...13 (5.9)....150304Repair Key.............................................* .........150577Clean Out Tap (For Bushing) .................* .........150562
229
See pages 230 and 231for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
32/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
SUPER DUTY BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61032-15
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-03
Bullet Bit Holder.......................................*..............216044-013-14(83mm) Body w/ Flight Segmentand Bit Holders ...................................... .............150724
SPADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61036-12
COMPONENT PARTSDescription Lb/Kg Part No.
Spade Bit w/Retainer.................................*..............150194-04Spade Bit Holder ......................................*..............216044-02Nail ..........................................................*..............1506783-14(83mm) Body ................................... .............150653
Superior cleaning action of spade'scutter blades reduces cutterheadclogging in soft, sticky clays. Bladeangle enhances materialconveyance.
Ideal for consolidated forma-tions, cemented gravel and con-crete. Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed to accept awooden plug or brass guide for
use with the overshot wirelinesystem.
CUTTERHEADS 3-14(83mm) 2-KEYSTANDARD DUTY AUGER
BULLDOG
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61032-16
COMPONENT PARTSDescription Lb/Kg Part No.
Bit.............................................................*..............1502333-14(83mm) Body ................................... .............150728
BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61031-16
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment.......................................... .............1505933-14(83mm) Body w/ Flight Segment....... .............150723
Suited for drilling in unconsolidatedformations such as sandy loam andclay. Designed to accept a woodenplug or brass guide for use with theovershot wireline system.
A tough multi-purpose cutterhead forfull range drilling. Bits are designedfor a uniform wear pattern andlonger service life. Recommended forabrasive conditions and difficult hardformations.
230
Continued on next page
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
33/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEADS 3-14(83mm) 2-KEYSTANDARD DUTY AUGER (cont.)
BULLET SPADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61037-05
COMPONENT PARTSDescription Lb/Kg Part No.
Bullet Bit w/Retainer.................................*..............150194-03Spade Bit w/Retainer.................................*..............150194-04Bullet Bit Holder.......................................*..............216044-01Spade Bit Holder ......................................*..............216044-02Nail ..........................................................*..............150678Flight Segment.......................................... .............150593-013-14(83mm) Body ................................... .............150726
BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61038-05
COMPONENT PARTS
Description Lb/Kg Part No.Bullet Bit w/Retainer.................................*..............150194-03Bullet Bit Holder.......................................*..............216044-01Flight Segment.......................................... .............150593-013-14(83mm) Body ................................... .............150727
For very efficient penetration ingravel, cobble or fractured
formations. Bullet bit anglesmaintain hole gauge and reduceauger wear.
Combines chipping action of bulletbits with the cleaning action ofspade blades. Ideal for shale andglacial tills.
231 2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
34/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
3-14(83mm) 2-KEYHEAVY DUTY AUGERH.D. key size is 58(16mm) Sizes are identified by hollow stemauger I.D. Order a lead section and the following as needed:Cutterhead, pilot bit, extra auger sections and center rods.
5 (1.5mm) LEAD SECTION ASSEMBLY:
6-1
2(165mm) O.D.Description Lb/Kg Part No.
1-58(41mm) Hex, AW Rod.......................... ........61046-011-58(41mm) Hex, AWML Rod..................... ........61046-021-58(41mm) Hex, NW Rod ......................... ........61046-031-58(41mm) Hex, NWML Rod .................... ........61046-042(51mm) Hex, AW Rod.............................. ........61046-052(51mm) Hex, AWML Rod......................... ........61046-062(51mm) Hex, NW Rod............................. ........61046-072(51mm) Hex, NWML Rod........................ ........61046-08
COMPONENT PARTSRef Description Lb/Kg Part No.
1 Drive Cap: 2(51mm) Hex ...............22 (10)....150646
2 Rod Bolt................................................ *........3100-01843 Hex Nut................................................ *........3122-00124 Lockbolt - 1 Reqd (Repair Only)........... *........150631-065 Bushing................................................. *........150631-036 Handle.................................................. *........3781-00107 Socket................................................... *........3782-00178 Adapter: AW Rod to Drive Cap......... 5 (2.3)....1503108 Adapter: AWML Rod to Drive Cap.... 5 (2.3)....1503118 Adapter: NW Rod to Drive Cap .........11 (5).....180049-038 Adapter: NWML Rod to Drive Cap ....11 (5).....180054-049 Coupling Pin (Repair Only) ...............6 (2.7)....150631-07
10 Auger Section - 50(1.5m) .............69 (31.3) ..15063111 Center Rod - 50(1.5m), AW .........22 (10.0) ..00160511 Center Rod - 50(1.5m), AWML .....15 (6.8) ...006276
11 Center Rod - 50(1.5m), NW .........32 (14.5) ..00160811 Center Rod - 50(1.5m), NWML....35 (15.9) ..00627812 Box Coupling (Repair Only) ..............6 (2.7) ....150631-0113 Plug - 1-18(29mm) Hex to
AW Rod Box ....................................12 (5.4) ...15031213 Plug - 1-18(29mm) Hex
to AWML Rod Box ...........................12 (5.4) ...15037913 Plug - 1-18(29mm) Hex
to NW Rod Box .................................11 (5).....15030613 Plug - 1-18(29mm) Hex
to NWML Rod Box ............................11 (5).....15037714 Plug Bolt................................................* ........3130-009815 Pilot Bit, 2-Prong, 1-18(29mm) Hex ..2 (.9) .....20002415 Pilot Bit, 3-Wing, 1-18(29mm) Hex...... *........150574-01
Repair Key ............................................ *........150631-04
67
Lead Section Assembly
Pilot Bit
1
2
4
8
9
10
12
4
13
14
15
3
11
5
Cutterheads
15
232
See pages 233 and 234for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
35/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
CUTTERHEADS 3-14(83mm) 2-KEYHEAVY DUTY AUGER
BULLDOG
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61032-17
COMPONENT PARTSDescription Lb/Kg Part No.
Bit.............................................................*..............1502333-14(83mm) Body ................................... .............150763
BLADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61031-17
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Flight Segment.......................................... .............1505933-14(83mm) Body w/ Flight Segment....... .............150764
Suited for drilling in unconsolidatedformations such as sandy loam andclay. Designed to accept a woodenplug or brass guide for use with theovershot wireline system.
A tough multi-purpose cutterhead forfull range drilling. Bits are designedfor a uniform wear pattern andlonger service life. Recommended forabrasive conditions and difficult hardformations.
SUPER DUTY BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61033-03
COMPONENT PARTSDescription Lb/Kg Part No.
Cutterblade w/Carbide..............................*..............004303Blade Bolt.................................................*..............001293Bullet Bit w/Retainer.................................*..............150194-03
Bullet Bit Holder.......................................*..............216044-013-14(83mm) Body w/ Flight Segmentand Bit Holders ...................................... .............150635-01
SPADE
CUTTERHEADDescription O.D. Lb/Kg Part No.
3-14(83mm) ...........7-14(184mm) ......19 (8.6) .......61036-13
COMPONENT PARTSDescription Lb/Kg Part No.
Spade Bit w/Retainer.................................*..............150194-04Spade Bit Holder ......................................*..............216044-02Nail ..........................................................*..............1506783-14(83mm) Body ................................... .............150766
Superior cleaning action of spade'scutter blades reduces cutterheadclogging in soft, sticky clays. Bladeangle enhances materialconveyance.
Ideal for consolidated forma-tions, cemented gravel and con-crete. Hard surfacing increasescutterhead life in hard, abrasiveformations. Designed to accept awooden plug or brass guide for
use with the overshot wirelinesystem.
233
Continued on next page
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
36/47
-
8/6/2019 Hollow Stem Augers
37/47
Key: * Designates weights less than 1lb (.5kg) Consult factory
HOLLOW STEM AUGERS AND CUTTERHEADS
67
Lead Section Assembly
Pilot Bit
1
2
4
8
9
10
12
4
13
14
15
3
11
5
Cutterheads
15
4-14(108mm) 2-KEYHEAVY DUTY AUGEROften used for 2 (51mm) monitoring well installation. H.D.key size is 58 (16mm). Sizes are identified by hollow stemauger I.D. Order a lead section and the following as needed:Cutterhead, pilot bit, extra auger sections and center rods.
5 (1.5mm) LEAD SECTION ASSEMBLY:8-14(165mm) O.D.Description Lb/Kg Part No.
1-58(41mm) Hex, AW Rod.......................... ........61047-011-58(41mm) Hex, AWML Rod..................... ........61047-021-58(41mm) Hex, NW Rod ......................... ........61047-031-58(41mm) Hex, NWML Rod .................... ........61047-042(51mm) Hex, AW Rod.............................. ........61047-052(51mm) Hex, AWML Rod......................... ........61047-062(51mm) Hex, NW Rod............................. ........61047-072(51mm) Hex, NWML Rod........................ ........61047-08
COMPONENT PARTSRef Description Lb/Kg Part No.
1 Drive Cap, 2(51mm) Hex Shank ...28 (12.7) ..1506492 Rod Bolt................................................ *........3100-02793 Hex Nut................................................ *........3122-00124 Lockbolt - 2 Reqd (Repair Only)........... *........150631-065 Repair Bushing...................................... *........150631-036 Handle.................................................. *........3781-00097 Socket................................................... *........3782-00168 Adapter: AW Rod Pin to Drive Cap ...5 (2.3) ....1503108 Adapter: AWML Rod Pin to
Drive Cap..........................................5 (2.3) ....1503118 Adapter: NW Rod Pin to Drive Cap .....11 (5).....180049-038 Adapter: NWML Rod Pin to
Drive Cap ..........................................11 (5).....180054-049 Pin Coupling (Repair Only) ...............9 (4.1)....150632-04
10 Auger Section: 50(1.5m) ..............90 (40.8) ..15063211 Center Rod: 50(1.5m), AW............22 (10)....00160511 Center Rod: 50(1.5m), AWML.......15 (6.8) ...00627611 Center Rod: 50(1.5m), NW ..........32 (14.5) ..00160811 Center Rod: 50(1.5m), NWML .....35 (15.9) ..00627812 Box Coupling (Repair Only) ..............9 (4.1) ....150632-0113 Plug: 1-18(29mm) Hex Socket
to AW Rod Box ................................19 (8.6) ...15049213 Plug: 1-18(29mm) Hex Socket to
AWML Rod Box ...............................19 (8.6) ...15049413 Plug: 1-18(29mm) Hex Socket
to NW Rod Box................................18 (8.2) ...15048813 Plug: 1-18(29mm) Hex Socket
to NWML Rod Box...........................18 (8.2) ...15048614 Plug Bolt ............................................... *........3130-011815 Pilot Bit, 1-18(29mm) Hex Shank,
2-Prong ..............................................2 (.9) .....00430415 Pilot Bit, 1-18(29mm)
Hex Shank, 3-Wing ...........................4 (1.8) ....150574-02Repair Key.......................................... *............150632-03
235
See pages 236 and 237for cutterheadinformation
2009 Mobile Drill, LLC. All rights reserved.
-
8/6/2019 Hollow Stem Augers
38/47
3807 Madison Ave., Indianapolis IN 46227 Call Toll Free: 1(800) 766-3745 Phone: (317) 787-6371 FAX:(317) 784-5661
HOLLOW STEM AUGERS AND CUTTERHEADS
SUPER DUTY BLADE BULLET
CUTTERHEADDescription O.D. Lb/Kg Part No.
4-14(108mm).........8-12(216mm) ......20 (9.1) .......61033-04
COMPONENT PARTSDescription L