hot insulation details.pdf
TRANSCRIPT
-
October 1997
Process Industry PracticesInsulation
PIP INIH1000Hot Insulation Installation Details
-
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
In an effort to minimize the cost of process industry facilities, this Practice hasbeen prepared from the technical requirements in the existing standards of majorindustrial users, contractors, or standards organizations. By harmonizing these technicalrequirements into a single set of Practices, administrative, application, and engineeringcosts to both the purchaser and the manufacturer should be reduced. While this Practiceis expected to incorporate the majority of requirements of most users, individualapplications may involve requirements that will be appended to and take precedence overthis Practice. Determinations concerning fitness for purpose and particular matters orapplication of the Practice to particular project or engineering situations should not bemade solely on information contained in these materials. The use of trade names fromtime to time should not be viewed as an expression of preference but rather recognized asnormal usage in the trade. Other brands having the same specifications are equallycorrect and may be substituted for those named. All practices or guidelines are intendedto be consistent with applicable laws and regulations including OSHA requirements. Tothe extent these practices or guidelines should conflict with OSHA or other applicablelaws or regulations, such laws or regulations must be followed. Consult an appropriateprofessional before applying or acting on any material contained in or suggested by thePractice.
Process Industry Practices (PIP), Construction Industry Institute, TheUniversity of Texas at Austin, 3208 Red River Street, Suite 300, Austin,Texas 78705. PIP member companies may copy this practice for their internaluse.
Not printed with state funds.
-
October 1997
Process Industry Practices Page 1 of 2
Process Industry PracticesInsulation
PIP INIH1000Hot Insulation Installation Details
Table of Contents
1. Introduction ..................................21.1 Purpose..............................................2
Data Sheets
INIH0001 Piping - General ArrangementINIH0002 Piping - Layered InsulationINIH0003 Piping - Vertical Insulation Support
Single LayerINIH0004 Piping - Vertical Insulation Support
Multi-LayerINIH0006 Piping - Flange InsulationINIH0007 Piping - Insulation ConnectionsINIH0008 Piping - Expansion JointINIH0009 Removable and Reusable
Insulation - FlexibleINIH0010 Valve CoverINIH0011 Pipe SupportsINIH0012 Hanger Rod Rain ShieldINIH0013 Spacer Blocks for Typical Tracer
ArrangementsINIH0050 Vertical Vessels with Outside
Diameters over 36" (915)
INIH0051 Vertical Vessels with OutsideDiameters 36" (915) and Less
INIH0052 Vessel Composite Type 1INIH0053 Vessel Composite Type 2INIH0054 Vertical Vessel Bottom Head
InsulationINIH0055 Top/Horizontal Head NozzlesINIH0056 Vessel Stiffener Insulation DetailINIH0057 Insulated Manhole CoverINIH0058 Rigid, Removable and Reusable
Insulated Manhole CoverINIH0059 Typical Clip DetailsINIH0060 Nozzle FlashingINIH0061 Lap Seam DetailsINIH0062 Horizontal VesselsINIH0063 Application of Metal Gores on
Horizontal Vessel HeadsINIH0064 Horizontal Heat Exchangers
-
PIP INIH1000Hot Insulation Installation Details October 1997
Page 2 of 2 Process Industry Practices
1. Introduction
1.1 Purpose
The purpose of this Practice is to provide installation detail drawings for hot insulationsystems.