how to build a toy box
TRANSCRIPT
HOW TO MAKE A TOY BOX WITH A
ROUNDED TOP
BY: Debbie White
STEP-1 SUPPLIES YOU NEED
24-by-34 ½ - by ¾ plywood 1- by – 4 – by – 37 ½ lumber Glue Wood screws Damp cloth Drill Nail Workable Measure tape maker
STEP-2 STARTING TO BUILD Place glue around the edges of plywood,
clean up with damp cloth. Place plywood up on top of the side that
has glue, and secure with wood screws. This makes the bottom of the toy box.
STEP-3 Using your worktable, lying the lumber
down, an mark your spots. Now you would began to drill were you
marked the holes or spots. Next you would secure the pieces with the
nails. Now you would began to place all of the
pieces around the bottom part.
STEP-4 Now you would need to measure your side
panel at 36-inch sides, and drive the nail on each side about 18 inches.
Repeat this step until all the sides are done.
STEP-5 Mark a line using a plywood as a guide. Next preparing for the top. Cut the center, make two parts to the round
top cover. Then make your top and place it over the
bottom.
STEP-6 After dividing the two top part place the two
pieces together with the glue and wood nails.
Next you would let dry and sand until edges are smooth.
Install the hinges to the top and to the bottom
Now toy box is completed.
CONCLUSIONHaving a childcare center requires plenty of room therefore, you would need to make as much room as possible, for the little ones. Making a toy box so that all toys could be placed inside, is as easy as 1-2-3 steps, however, you have to follow direction. These simple direction could become very helpful in many different way especially in saving you money by doing it yourself.
REFERENCES
www.ehow.com/how-7707553-make-toy-box-rounded-top.htmlwww.SteelSentry.comhttp://www.woodtoybox.com/