how to connect vto and vth - dahuasecurity.com
TRANSCRIPT
Equipment Model Firmware Course Version Date
VTO2000A General_VTOXXX_Eng_P_16M_V3.120.0000.0.R.20170803
V1.0 2017/10/30
VTH1550CHGeneral_VTH151X_Eng_P_V4.000.0000.0.R.201
70803
IPC-HDW1220SNSoftware Version: 2.420.0000.14.R, build :
2016-04-18
DMSSiOS Version 3.49.001iDMSS Lite
How to Connect VTO and VTH
Page1Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
Overview
Video talk function between VTO and VTH can split into 3 types:
You should set up VTO and then set up VTH to successfully connect those two
types of devices.
1 VTO+
1 VTH
1 VTO+
m VTH
n VTO+
m VTH
Page2Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
① Filled in the VTO IP address in the IE explorer, it will
show a log interface .
② Then input username and password
③ Click on login
Note:
VTO default IP address is 10.22.5.189 or 192.168.1.110.
Default username and password are both ‘admin’. Please
change user password after first time login.
How to Configure: 1 VTO+1VTHVTO Web Config Main VTH Setup
1
2
3
Page3Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
④ setup the device type as ‘villa station’
VTO Web Config Main VTH Setup
⑤ Setup the Building number, Building Unit number and VTO number.
Note: the setting range of VTO number is 6901~6999, and the number
format is 69XX.
⑥The MGT setting is usually for apartment system, if there
is a management center in the villa system, you can
configure the MGT; if not necessary, just keep default. For
detailed configuration instructions, please refer to How to
Configure: SmartPSS).
How to Configure: 1 VTO+1VTH
4
5
6
Page4Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
⑦ Select System Config>Indoor Management,
Click “add” button to add VTH
VTO Web Config Main VTH Setup
⑧ Add the indoor monitor’s room NO, and click
“OK”, save the setting.
How to Configure: 1 VTO+1VTH
7
8
Page5Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
⑨ Reboot the device
How to Configure: 1 VTO+1VTHVTO Web Config Main VTH Setup
9
Page6Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
① On the VTH’s screen, please long press ‘Setting’ for 6 seconds until the “Password Verification” is appeared.
② Input VTH Project password 888888.
③ Click “OK” to go to the new set page.
How to Configure: 1 VTO+1VTHVTO Web Config Main VTH Setup
1
2
3
Page7Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
④ Select “VTH Set” to set the VTH IP address.
⑤ According to VTO config, input room No. It need be same with the VTH short No.
⑥ The default Config is “Master”, it means the VTH is the main VTH.
⑦ Click “OK”, save the setting.
How to Configure: 1 VTO+1VTHVTO Web Config Main VTH Setup
4 5 6
7
Page8Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
⑧ Select “VTO Set” to check the VTO configuration.
⑨ Input main VTO IP.
⑩ Input main VTO’s user name and password.
default user name : admin
default password : admin
Choose “ON” to open the enable status.
8
9
How to Configure: 1 VTO+1VTH
10
11
VTO Web Config Main VTH Setup
After the above operation steps, if the icon of right
top of the screen change from to , it
means you can make a call between VTO and VTH.
Page9Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
How to Configure: 1 VTO+m VTHVTO Web Config Main VTH Setup
Note: If there are more than 2 VTHs, you can set group call function of VDP. Maximum support for 5 VTH.
① Login VTO2000A web interface http://192.168.1.110 ,
System Config -> LAN Config, make sure to tick the
‘Group Call’, and click OK to save.
② System Config -> Indoor Manager, click on ‘Add’. You
need to input room number of VTH in the ‘VTH Short
No’, such as 101. Refer to page 8.
③ Reboot the device.
Extension VTH Setup
1
Page10Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
How to Configure: 1 VTO+m VTHVTO Web Config Main VTH Setup
① Master VTH add VTO. Set room number as 101. Add
VTO2000A in ‘VTO Config’ and enable it.(Refer to page10-12)
② Extension VTH add VTO. Setup extension VTH’s room number
in ‘VTH Config’, press ‘Master’ and switch to ‘Extension’. Set the
room number as 101-1
③ input the master VTH’s IP, master name: admin, master pwd:
888888.
Note: maximum support 5 VTH (1 main VTH and 4 extension VTH). The master VTH’s room number is set
as 101, and extension VTH’s room number should set as 101-1,101-2,101-3,101-4.
Extension VTH Setup
2
3
Page11Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
How to Configure: 1 VTO+m VTHVTO Web Config Main VTH Setup
④ After setting up, the VTO information of master VTH has
been synchronized to extension VTH, and then enable it.
Extension VTH Setup
4
After the above operation steps, if the icon of right
top of the screen change from to , it
means you can make a call between VTO and VTH.
Page12Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
How to Configure: n VTO+m VTHMain VTO Web Config Main VTH Setup
In IP villa system, it maximum supports 20 VTO and 5 VTH.
① Login http://192.168.1.110 , System Config -> LAN
Config, setup main VTH’s Building number, Building Unit
number and VTO number. Make sure to tick the ‘Group
Call’ box, and click OK to save.
② System Config -> Indoor Manager, click on ‘Add’. You
need to input room number of VTH in the ‘VTH Short
No’ box, such as 101.
③ Reboot the device.
Sub VTO Web Config Extension VTH Setup
Page13Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
How to Configure: n VTO+m VTHMain VTO Web Config Main VTH Setup
In IP villa system, it maximum supports 20 VTO and 5 VTH.
① Login http://192.168.1.111 , System Config -> LAN
Config, setup main VTH’s Building number, Building Unit
number and VTO number. Make sure to tick the ‘Group
Call’ box, and click OK to save.
Note: Building number and unit number of main and
sub VTO must be the same; VTO number must be
different. VTO number format is ‘69XX’, range
6901~6999.
② System Config -> Indoor Manager, click on ‘Add’. You
need to input room number of VTH in the ‘VTH Short
No’ box, such as 101.
③ Reboot the device.
Sub VTO Web Config Extension VTH Setup
Page14Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
How to Configure: n VTO+m VTH
① Master VTH add main VTO. Set room number as 101. Add
VTO2000A in ‘VTO Config’ and enable it.)
② Master VTH add sub VTO. Press the icon to switch to sub
VTO configuration. Add sub VTO as the same and enable it.
Note: maximum support 5 VTH (1 main VTH and 4 extension VTH). The master VTH’s room number is set
as 101, and extension VTH’s room number should set as 101-1,101-2,101-3,101-4.
Main VTO Web Config Main VTH SetupSub VTO Web Config Extension VTH Setup
1
2
Page15Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
How to Configure: n VTO+m VTHVTO Web Config Main VTH Setup
③ Extension VTH add VTO. Setup the VTH as extension
VTH and the configuration will synchronize automatically
from master VTH. You need to enable it..
Extension VTH Setup
3
After the above operation steps, if the icon of right
top of the screen change from to , it
means you can make a call between VTO and VTH.