how to flash vag bosch edc16u34 ecu with v54 fgtech galletto 4 master

How to flash VAG Bosch EDC16U34 ECU with V54 FGTech Galletto 4 Master ？？

V54 FGTech Galletto 4 master is the update version of the galletto 2 V53.FGTech with multi-language and support all cars, trucks, motorcycles, Marine, BDM MPC5xx, EDC17, BDM Boot Mode Tricore, checksum. Autodiagnosticobd have FGTech Galletto 4-Master V54 BDM-TriCore-OBD with BDM Adapters for launched.

V54 Fgtech Galletto 4 Master MPC5xx EDC17 BDM-TriCore-OBD

Requirement:

1.V54 FGTech Galletto 4 Master Full Set

2.A laptop running Win XP home

3.Close the anti-virus software

4.cut internet/network connection

Precedure for you to flash a VAG Bosch EDC16U34 ECU:

Step1: Install the V54 FGTech Galletto 4 Master Software.

Step2: Connect the V54 FGTech ECU tuning kit with computer, setup boot and BDM.

http://www.eobdtool.fr/wholesale/fgtech-galletto-4-master-bdm-tricore-obd-function-support-french.html



http://www.autodiagnosticobd.com/fgtech-v54-galletto-4-master-galletto-4-mpc5xx-edc17-bdm-obd-wholesale-auto-diagnostic-2165.html



Step3: Find out the BDM pads showed on the picture bellow.

Step4: Carefully align with the BDM Port ECU programming spring adapter/probe drop and secure frame.

Step5: Make sure everything is connected correctly, as in your PDF file.

http://2.bp.blogspot.com/-W55ovfr53UQ/VS4ELCPgctI/AAAAAAAACAs/2XKZ_rq5YuA/s1600/v54-fgtech-galletto-4-master-eobdtoolfr-1.png

http://4.bp.blogspot.com/-tL-MzO1Q3wg/VS4ELaNHwiI/AAAAAAAACAw/VuTc3DRnauU/s1600/v54-fgtech-galletto-4-master-eobdtoolfr-2.png

http://2.bp.blogspot.com/-btG7yzixW1s/VS4EiRzlJ-I/AAAAAAAACA8/J0dmOutQHL8/s1600/v54-fgtech-galletto-4-master-eobdtoolfr-3.png

http://3.bp.blogspot.com/-mCKrkU0hITU/VS4E68A7f8I/AAAAAAAACBI/crTE2w5gowU/s1600/v54-fgtech-galletto-4-master-eobdtoolfr-4.png

Step6: Run FGtech V54 software, accept the system notice.

Attention: Make sure you have 12V+ feeding FGTECH 4 master main device and the intermediate adapter.

Step7: Switch intermediate adapter to ON, the read LED indicator will flash

Step8: Click the Option list as the order: "Select Driver"=> "BMD-Jtag"=>"Connect".

Step9: The system is building communication between V54 FGTech Galletto 4 Master and computer. If communication is well built, green bar will start loading and finally display ECU information.

Step10: Ready to read and write ECU. Choose "Read Eeprom", follow the system

http://2.bp.blogspot.com/-ikebzS97rd0/VS4FSF1TLVI/AAAAAAAACBQ/XgIdUcyF7kc/s1600/v54-fgtech-galletto-4-master-eobdtoolfr-5.png

http://4.bp.blogspot.com/-VXLOotpwQAs/VS4FlX3z6LI/AAAAAAAACBY/c_1NtYknAUk/s1600/v54-fgtech-galletto-4-master-eobdtoolfr-6.png

http://4.bp.blogspot.com/-culfHCsPS-8/VS4GjUzPd1I/AAAAAAAACBg/ERg81ZfxNrY/s1600/v54-fgtech-galletto-4-master-eobdtoolfr-8.png

prompts to read eeprom.Step11: Then select "Write Eeprom", follow the system prompts.

Step12: Turn the switch off when complete write eeprom.Step13: After the programming finished, exit FgTech V54 software program.

This article is compiled by www autodiagnosticobd com, if you have any advice on it, pls feel free to contact autodiagnosticobd - China autodiagnosticobd Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

ADD:1102A,DongMing Business Bldg, Longhua new district, Shenzhen 518113,China

TEL :+86-755-29438109

Email: [email protected]

Facebook: Misha Liang

Whatsapp: +86 13714697738

Skype: eobdscan1

Website: www.autodiagnosticobd.com

how to flash vag bosch edc16u34 ecu with v54 fgtech galletto 4 master

Documents