How to setup Rooihub and share files on your

computer

1. Open your internet browser (e.g. Internet Explorer or Firefox) and type in

the address bar: http://www.jpmeijers.com/network/Rooihub/

2. Download these two files:

- ApexDC++_1.3.6_setup-x86.exe

(Only 64-bit computers have to download: ApexDC++_1.3.6_setup-x64.exe)

- RooiHub-v1.0.0.86-installer.exe

3. Then run ApexDC++_1.4.3_setup.exe and follow the setup instructions.

Just click Next until the setup is finished.

4. Run ApexDC++ from your desktop now.

5. When the interface appear, click on File ���� Settings…

Settings:

1. Click on General tab and specify your nickname to be displayed on the

hub

2. Click on the Sharing tab and tick the folders you want to share on DC.

Note: When you tick a folder, the dialog may freeze a bit, so please be

patient!!

This dialog is going to appear when you have ticked one of the folders on your

computer. It is necessary for ApexDC++ to index your files first before you can share

it. If you share a large amount of data (e.g. 20 Gigabyte or 1 Terabyte) then it might

take a while to finish this process. Just click Run in Background and move on.

3. When done ticking the folders to be shared, click on OK.

4. Minimize ApexDC++.

5. Then run RooiHub-v1.0.0.86-installer.exe and follow the steps.

6. If everything goes according to plan, ApexDC++ will appear with Rooihub open as a

hub.

NB! Problem with public hubs:

When ApexDC++ is installed it comes with two other public hubs.

It is recommended to remove them, because if your Inetkey is open (aswell as ApexDC++) then other users

from the public hubs can upload from you. That means you are paying for their download!

How to remove the public hubs:

1. Open the list of Recent Hubs

2. Click on Remove all

3. And your done!

Enjoy!