how to: recover your touch dynamic factory os. …...how to: recover your touch dynamic factory os....
TRANSCRIPT
How to: Recover your Touch Dynamic factory OS.
WARNING: This will erase the entire contents of your drive.
Step 1: When the system is powering up, right after the POST screen, you will
see the Windows Boot Manager window appear for 2 seconds. Please use your
arrow keys to select “Touch Dynamic Recovery”. You must move either arrow
before this screen disappears. Then press “Enter”. Please see diagram 1-1
Diagram: 1-1
Step 2: Select the keyboard layout and select “Next”.
Please refer to diagram 1-2.
Diagram: 1-2
Step 3: Make sure the Touch Dynamic Recovery is highlighted and select
“Next”. Please refer to Diagram 1-3.
Diagram: 1-3
Step 4: Once the “System Recovery Options” window, select the “OEM Factory
Restore” link. The “Touch Dynamic Restore Utility” window will appear. Select
the “Restore” button.
Diagram 1-4
Step 5: At this point the Microsoft “End User License Agreement” will be
displayed. Please read the license, and select “Accept” if the terms displayed
are ok. Please refer to diagram 1-5.
Diagram 1-5
Step 6: The “Confirm Restore” window will be displayed. Select “Yes” to
continue. Once again, please be advised, that this will completely erase
everything from your hard drive. Please refer to diagram 1-6
Diagram 1-6
Step 7: At this point the restore progress window will show you that the
recovery is being performed. Please refer to diagram 1-7.
Diagram 1-7
Step 8: If the recovery completed without any errors, please select “OK”. Then
close the “Touch Dynamic Restore Utility” window by selecting the “X”. Finally
select “Restart”. The recovery is now completed.
Diagram 1-9