hp compaq beep codes

1
7/22/2019 HP Compaq Beep Codes http://slidepdf.com/reader/full/hp-compaq-beep-codes 1/1 HP Compaq dc7700 Business Desktop PC - Diagnostic LED and Beep Codes Information The following table describes the dc7700 d iagnostic LED and beep codes. Details Diagnosis Code Power on Steady green Processor thermal protection activated Blinks red twice Processor is not installed Blinks red three times Failure (power supply is overloaded) Blinks red four times Memory error Blinks red and beeps five times Pre-video graphics error Blinks red and beeps six times PCA (system board) failure, ROM detected failure before video Blinks red and beeps seven times Invalid ROM based on bad checksum Blinks red and beeps eight times System not fetching code Blinks red and beeps nine times Bad option card Blinks red and beeps ten times System does not power on No blinks or beeps

Upload: steve-noble

Post on 10-Feb-2018

460 views

Category:

Documents


21 download

TRANSCRIPT

Page 1: HP Compaq Beep Codes

7/22/2019 HP Compaq Beep Codes

http://slidepdf.com/reader/full/hp-compaq-beep-codes 1/1

HP Compaq dc7700 Business Desktop PC -Diagnostic LED and Beep CodesInformationThe following table describes the dc7700 diagnostic LED and beep codes.

Details

Diagnosis  Code 

Power on Steady green

Processor thermal protectionactivated

Blinks red twice 

Processor is not installed Blinks red three times

Failure (power supply is overloaded) Blinks red four times

Memory error Blinks red andbeeps five times

Pre-video graphics error Blinks red andbeeps six times

PCA (system board) failure, ROMdetected failure before video

Blinks red andbeeps seven times

Invalid ROM based on bad checksum Blinks red and

beeps eight timesSystem not fetching code Blinks red and

beeps nine times

Bad option card Blinks red andbeeps ten times

System does not power on No blinks or beeps