hydrant, hose & nozzle
TRANSCRIPT
Due to constant improvement in our products, we reserved the right to modify or withdraw any product or service without prior notice.
Distributed By :-
MEMBER
Version : 07-05-2008
Model PH-SQS 100VS
Body Material Cast Iron to BS 1452 (Painted Red)
Hydrant Valve Copper Alloy Body with Alu. Alloy Connection (Vietnam Style) Inlet Size φ4” (100mm) to Table E, BS 10 Flange Outlet Connection 2 x 2-1/2” Hydrant Valve with Alu. Alloy Connection (Vietnam Style)
Test Pressure 20 Bar (300 psi)
Working Pressure 10 Bar (150 psi)
Weight 30 kg
2-Way Pillar Hydrant with Hydrant Valve (Vietnam Style)
2-1/2” Hydrant Valve
2-1/2” Alu. Alloy Connection (Vietnam Style )
Rubber Cap & Chain
570 mm
835
mm
670
mm
φ 115mm
φ 216mm
Front View Side View
Pillar Hydrants are generally used, and connected to the water mains around the perimeters of buildings or roadsides. During emergencies, the Fire Brigade or Fire Engines could draw water from the Pillar Hydrants to fight against any surrounding fire. MULTRON range of products are manufactured in accordance to our ISO 9001 : 2001 Quality Management System.
φ 4” Inlet Flange Details ( Table E, BS 10 )
Ф 16 mm (8 Holes)
Ф 216 mm
Ф 100 mm
PCD Ф 180 mm
PRESSURE REGULATING
HYDRANT VALVE Model HV007V ( Vietnam Style )
Due to constant improvement in our products, we reserved the right to modify or withdraw any product or service without prior notice.
Distributed By :-
MEMBER
Version : 25-08-2008
The MULTRON Pressure Regulating Hydrant Valve is self-regulating, that enables pressure to be maintained at any hydrant location in the system of a high rise building. Efficient pressure control is not affected by differences in inlet pressure, which may occur at varying floor levels. This self-regulating valve is very suitable for commercial buildings, oil refineries and chemical plants where varying inlet pressure may also create problems.
The hydrant valve incorporates a spring loaded balance pressure-reducing valve combined with a hydrant stop valve. Outlet is provided with Vietnam standard style aluminum connection.
Pressure Regulating Hydrant Valve Model : HV007V
Typical Dimension :- Technical Data :
BS 5041 : Part 1 : 1987 Specification for landing valves for wet risers
Standard
BS 336 : 1989 Specification for Fire hose couplings and ancillary equipment
Inlet Pressure 5 to 20 bar
Outlet Pressure 5 to 8 bar
Test Pressure 30 bar
Inlet Size 2-1/2” BSP
Outlet Size 2-1/2” Vietnam Connection
Material
Body : LG2 or Brass
Hand Wheel : Cast Iron
Outlet : Aluminum Front View
∅120 mm
Side View
400
mm
185 mm
230
mm
2-1/2” HYDRANT VALVE
Model HV005-1V (VIETNAM)
Due to constant improvement in our products, we reserved the right to modify or withdraw any product or service without prior notice.
Distributed By :-
MEMBER
Version : 25-08-2008
Diameter 130 mm
190
mm
Side View
Plan View
Model HV005-1V Inlet Male BSP Screw Thread Body Copper Alloy to BS 1400 Hand wheel Grey Cast Iron to BS 1452 Inlet Size 2-1/2” Male BSP Screw Thread Outlet Size 2-1/2” Male BSP Screw Thread Outlet Connection 2-1/2” Aluminum Coupling (Vietnam Style) Working Pressure 15 Bar (217.5 PSI) at 0 - 38° C Seat Test 16.5 Bar (239.5 PSI) Body Test 22.5 Bar (326.2 PSI) Gross Weight Approximately 2.9 kg
215 mm
The MULTRON range of Hydrant Valves are manufactured under our ISO 9001 : 2000 Quality Management System, and the products are generally produce in compliance to BS 5041 Part 1 Standard, with modification to suit Vietnam requirement.
2-1/2” Hydrant Valve Model : HV005-1V
Due to constant improvement in our products, we reserved the right to modify or withdraw any product or service without prior notice.
HYDRANT VALVES, NOZZLES & FIRE HOSES (VIETNAM STYLE)
HYDRANT VALVE
Model HV005-1V
Distributed By :-
MEMBER
Version : 25-08-2008
NOZZLE Model HN001-1V
Sizes Available
Dia. 2” (50mm) Dia. 2-1/2” (65mm)
Material Aluminium to BS 1490
Connection Vietnam Style
WHITE FIRE HOSE, BS 6391 TYPE 1 Material :- Woven Polyester with Rubber Internal Lining
Model Diameter Working Pressure
(Bar)
Burst Pressure
(Bar)
Available Length
(m)
2” (50mm) 12 36 FH-71-P12
2-1/2” 65mm) 12 36 20 ~ 30
2” (50mm) 16 48 FH-71-P16
2-1/2” (65mm) 16 48 20 ~ 30
Inlet Male BSP Screw Thread
Outlet Alu. Connection (Vietnam Style)
Body Copper Alloy to BS 1400
Handwheel Grey Cast Iron to BS 1452
Sizes Available
Dia. 2” (50mm) Dia. 2-1/2” (65mm)
Working Pressure 15 Bar (217.5 PSI) at 0 - 38° C
Seat Test 16.5 Bar (239.5 PSI)
Body Test 22.5 Bar (326.2 PSI)
2” Hydrant Valve
2-1/2” Hydrant Valve