i n d u s beta 4 - beta industrial · linear slot diffusers performance data the following tables...
TRANSCRIPT
PRODUCTS CATALOGUE 4PRODUCT BULLETIN
LINEAR SLOT DIFFUSERS
BETABETA in t r i d u s a l
in t r i d u s a l
BETABETA in t r i d u s a l
in t r i d u s a l
..w e cw gw b t a o m
..w e cw gw b t a o m
Dubai Head Office:Dubai Head Office:
e 97 6 1 5 0 07+ T l: 2 4 1e 97 6 1 5 0 07+ T l: 2 4 1
971 2 6 0 7Fax: + 4 165971 2 6 0 7Fax: + 4 165
1e + 7 706 97774 T l: 9 1e + 7 706 97774 T l: 94ax +F : 971 70 978764ax +F : 971 70 97876
Email:[email protected]:[email protected]
P.O.Box 50708, DubaiUnited Arab EmiratesP.O.Box 50708, DubaiUnited Arab Emirates
index
BETABETA in t r I d u s a l
>>
1-2
3-4
5-11>>
>>
PERFO M NC ATAA E DR
LINEAR SLOT DIFFUSERS
>>
>>
>>
>>
>>
>>
Available in 1 to 6 slots.Available in 1 to 6 slots.
Flush - mounted linear diffuser.Flush - mounted linear diffuser.
Standard lenght : 1000mm & 2000mm per section. OtherStandard lenght : 1000mm & 2000mm per section. Other
lengths are availabe on request. lengths are availabe on request.
180 fully adjustable air flow pattern by means of two air 180 fully adjustable air flow pattern by means of two air
deflections per slot. deflections per slot.
Available with hit-and-miss damper which controls the air flow Available with hit-and-miss damper which controls the air flow
rate without affecting the air flow pattern; can be used as anrate without affecting the air flow pattern; can be used as an
equalizing grid. equalizing grid.
For each slot the air deflector and hit-and-miss damper are For each slot the air deflector and hit-and-miss damper are
individually adjustable. individually adjustable.
Removable flange type end cap allows extending orRemovable flange type end cap allows extending or
shortening slot diffuser line without replacing existing pieces.shortening slot diffuser line without replacing existing pieces.
The deflector and the hit and miss damper are powder coated The deflector and the hit and miss damper are powder coated
with black color as standard. with black color as standard.
>>
>>
dimensions & discharge details
01 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Horizontal Left andHorizontal Right Discharge
Hit-and-miss damper
5,5
Neck Size
78
9,7 5,555
9,1
18,1
27,3
28,519,5
Flange Size
28,5 2,6
Deflector
Neck Size
Horizontal Left andVertical Discharge
Deflector
5,5 9,7
78
5,5
55
27,3
2,619,528,5
18,1
28,5
9,1
Neck Size
5,5 9,7
78
5,5
55
27,3
2,6
18,1
28,5
9,1
19,528,5
Flange Size Flange Size
Deflector
LINEAR SLOT DIFFUSERS
linear slot diffuser fixing details
ORDERING SYSTEM
Available types of finishing:Available types of finishing:
>>>>
Powder coated to RAL codesPowder coated to RAL codes
Standard Neck & Flange Sizes:Standard Neck & Flange Sizes:
Standard slot size 20mmStandard slot size 20mm
>>>>
Natural anodized aluminium finishNatural anodized aluminium finish
No. of Slots No. of Slots
Neck Size: (mm)Neck Size: (mm)
Flange Size: (mm)Flange Size: (mm)
1 Slot1 Slot 2 Slot2 Slot 3 Slot3 Slot 5 Slot5 Slot 6 Slot6 Slot4 Slot4 Slot
4747
7676
8585
114114
123123
152152
161161 199199 237 237
190190 228 228 266 266
TYPETYPE CURVECURVE SIZESIZE FINISHFINISH
CURVE : IF CURVE REQUIRED
CURVE : IF CURVE REQUIRED
(ONLY RLD)(ONLY RLD)
POWDER COATED FINISH AS PER RAL CODESPOWDER COATED FINISH AS PER RAL CODESRAL:RAL:
ANODIZED: ANODIZED: ANODIZED ALUMINIUM FINISHANODIZED ALUMINIUM FINISH
LENGTH NUMBER OF SLOTS LENGTH NUMBER OF SLOTS
SLD:SLD:
RLD:RLD:
SLPPLY LINEAR DIFFUSER WITH DEFLECTORSSLPPLY LINEAR DIFFUSER WITH DEFLECTORS
WITH HIT & MISS DAMPERWITH HIT & MISS DAMPER
RETURN LINEAR DIFFUSER WITHOUTRETURN LINEAR DIFFUSER WITHOUT
DEFLECTORS WITH SQUARE SHAPE PUNCHED STRIP.DEFLECTORS WITH SQUARE SHAPE PUNCHED STRIP. EXAMPLE:SLD 2000 3S RAL 9016 EXAMPLE:SLD 2000 3S RAL 9016
CURVECURVE
02 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Plenum By Others
Adjustable ScrewBy Others
Hanging Bridge bracketBy Others
False CeilingBy Others
Supporting Clamps
Slot Diffuser
LINEAR SLOT DIFFUSERS
1 - End Caps (F1)1 - End Caps (F1)
(A) - L-Shaped End Caps(A) - L-Shaped End Caps
L-shape flange : 30 55mm, available in different lengths to match slot diffuser width.
Very easy to install and remove. Gives flexibility to extend or shorten slot diffuser without replacement of existing pieces.
L-shape flange : 30 55mm, available in different lengths to match slot diffuser width.
Very easy to install and remove. Gives flexibility to extend or shorten slot diffuser without replacement of existing pieces.
Fixed at the end of slot diffuser line. Fixed at the end of slot diffuser line.
Supplies FREE with fixing screws. Supplies FREE with fixing screws.
(B) -Mitered Corners End Caps (B) -Mitered Corners End Caps
Available in 1 to 6 slot Available in 1 to 6 slot
2 - Corner pieces (F2) 2 - Corner pieces (F2)
Available in 1 to 6 slot Available in 1 to 6 slot
Available in any combination of X.Y (X-300 mm Y=300 mm as standard ) : 45 , 90 , 135
Available in any combination of X.Y (X-300 mm Y=300 mm as standard ) : 45 , 90 , 135
3 - Mitered ends (F3, F4) 3 - Mitered ends (F3, F4)
Standard lengths are available in mitered ends of 45 and 135 Standard lengths are available in mitered ends of 45 and 135
ACCESSORIES
03 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
STRAIGHT JOINT END CAP
30
O
44
30
Hole for Self-tapping screw
Hole for Self-tapping screw
MITERED JOINT END CAP
O64
Type RLD 3Swithout deflectorswith hit-and- miss dampers
For curved items,different sectionused as belowdrawing.
Minimum radius = 1000mm
F5
ACCESSORIES
04 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Mi
imum
Rad
ius
1
r
n
: m
ete
55
NECK SIZE = 123 mm
FLANGE SIZE = 152 mm
PRODUCTS TESTINGPRODUCTS TESTING
TEST METHOD TEST METHOD
NOTES: NOTES:
The air diffusers were tested in accordance with the Air diffusion council test code for grilles, registers and diffusers n o. ADC
1062.GRD.84, the test was conducted in ETL testing laboratories.
The diffusers were installed in the ADC facility and supplied with measured volume of air. The static pressure was measured
(1-1.5) duct diameters upstream of the diffuser inlet.
Acoustical data was obtained employing Bruel and Kjaer digital frequency analyzer, and analyzed by computer. Sound power
levels were plotted on a graph of noise criteria curves which are in the ADC codes.
The air diffusers were tested in accordance with the Air diffusion council test code for grilles, registers and diffusers n o. ADC
1062.GRD.84, the test was conducted in ETL testing laboratories.
The diffusers were installed in the ADC facility and supplied with measured volume of air. The static pressure was measured
(1-1.5) duct diameters upstream of the diffuser inlet.
Acoustical data was obtained employing Bruel and Kjaer digital frequency analyzer, and analyzed by computer. Sound power
levels were plotted on a graph of noise criteria curves which are in the ADC codes.
LINEAR SLOT DIFFUSERS
PERFORMANCE DATA
The following tables include the results of tests conducted on three linear slot diffusers. The test results include Noise Criteria
(NC), static pressure versus air flow, throw and Ak. The diffusers were selected and supplied by Beta In October 1991. The
extrapolations and interpolation were made to cover a full range of sizes and parameters according to ETL testing laborato-
ries Inc. who made the tests.
The following tables include the results of tests conducted on three linear slot diffusers. The test results include Noise Criteria
(NC), static pressure versus air flow, throw and Ak. The diffusers were selected and supplied by Beta In October 1991. The
extrapolations and interpolation were made to cover a full range of sizes and parameters according to ETL testing laborato-
ries Inc. who made the tests.
05 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
PERFORMANCE DATA
VERTICAL DISCHARGE
SYMBOLS
L/S : Air volume in liter per second.
Ak : Effective face area in meter Square per 1000 mm.
Pt. : Total pressure in millimeters water gauge.
Th. : Throw in meters.
NC : Noise Criteria.
L/S : Air volume in liter per second.
Ak : Effective face area in meter Square per 1000 mm.
Pt. : Total pressure in millimeters water gauge.
Th. : Throw in meters.
NC : Noise Criteria.
Supply
Vertical discharge flow pattern.
Noise Criteria values are based on(10 db) room attenuation.
Damper is fully open.
Throw values are based on terminal velocity of 0.50 m/s
Supply
Vertical discharge flow pattern.
Noise Criteria values are based on(10 db) room attenuation.
Damper is fully open.
Throw values are based on terminal velocity of 0.50 m/s
*
*
*
*
*
CONDITIONS
11
22
33
44
55
66
SLOTS SLOTS L/S L/S per per meter meter K AK A Pt Pt Th Th N CN C AK AK P tP t Th Th NC NC KA KA Pt Pt Th Th NC NC
16 MM 20 MM 25 25 MMMM
2424
3535
4747
5959
7171
8383
9494
2424
4747
7171
9494
118118
142142
165165
4747
7171
9494
118118
142142
165165
189189
7171
9494
118118
142142
165165
189189
212212
9494
118118
142142
165165
189189
212212
236236
118118
142142
165165
189189
212212
236236
283283
0.580.58
1.321.32
2.342.34
3.663.66
5.335.33
7.247.24
9.589.58
0.200.20
0.760.76
1.701.70
3.053.05
4.754.75
6.866.86
9.409.40
0.360.36
0.790.79
1.401.40
2.182.18
3.153.15
4.274.27
5.595.59
0.480.48
0.840.84
1.321.32
1.911.91
2.592.59
3.383.38
4.324.32
0.560.56
0.860.86
1.241.24
1.701.70
2.212.21
2.792.79
3.453.45
0.610.61
0.890.89
1.221.22
1.571.57
2.012.01
2.492.49
3.563.56
0.37
0.84
1.50
2.34
3.41
4.63
6.13
0.13
0.49
1.09
1.95
3.04
4.39
6.02
0.23
0.51
0.90
1.40
2.02
2.73
3.58
0.31
0.54
0.84
1.22
1.66
2.16
2.76
0.36
0.55
0.79
1.09
1.41
1.79
2.21
0.39
0.57
0.78
0.068
1.28
1.592.28
0.058
0.046
0.038
0.026
0.010
1.8
2.4
3.1
4.9
6.4
1.8
4.0
5.2
7.0
8.2
2.4
4.0
5.5
7.3
8.5
3.7
4.6
5.2
7.0
8.5
4.0
4.9
5.8
7.3
8.2
4.0
4.6
5.8
7.6
8.9
<15
<15
18
22
26
29
33
<15
<15
18
26
30
34
38
<15
<15
18
23
27
30
34
<15
<15
18
21
25
26
30
<15
<15
16
20
22
25
28
<15
<15
<15
18
20
2228
1.00
2.1 <152.1 <15
2.7 152.7 15
3.7 223.7 22
5.5 275.5 27
7.0 337.0 33
2.1 <152.1 <15
4.6 164.6 16
5.8 225.8 22
7.6 327.6 32
9.1 379.1 37
3333
3636
4141
4343
4747
2.7 <152.7 <15
4.6 164.6 16
6.1 226.1 22
7.9 297.9 29
9.4 349.4 34
3838
4242
4.0 <154.0 <15
4.9 164.9 16
5.8 225.8 22
7.6 267.6 26
9.4 319.4 31
4.3 < 154.3 < 15
5.2 155.2 15
6.4 206.4 20
7.9 257.9 25
9.1 289.1 28
3333
3737
3131
3535
4.3 < 154.3 < 15
5.2 155.2 15
6.4 186.4 18
8.2 228.2 22
9.89.8
0.0540.054
0.0460.046
0.0370.037
0.0300.030
0.0210.021
0.0080.008
0.91 2.4 150.91 2.4 15
2.06 3.0 192.06 3.0 19
3.66 4.3 283.66 4.3 28
5.72 6.1 345.72 6.1 34
8.33 7.6 418.33 7.6 41
11.31 4511.31 45
14.97 5114.97 510.31 2.4 160.31 2.4 16
1.19 5.2 201.19 5.2 20
2.66 6.4 282.66 6.4 28
4.77 8.2 404.77 8.2 407.42 10.0 467.42 10.0 46
10.72 5410.72 54
14.69 5914.69 59
0.56 3.0 160.56 3.0 16
1.23 5.2 201.23 5.2 20
2.19 6.7 282.19 6.7 28
3.41 8.5 363.41 8.5 36
4.92 10.3 434.92 10.3 43
6.67 48 6.67 48
8.73 538.73 530.75 4.3 160.75 4.3 16
1.31 5.2 201.31 5.2 20
2.06 6.4 282.06 6.4 28
2.98 8.2 332.98 8.2 33
4.05 10.3 394.05 10.3 39
5.28 415.28 41
6.75 466.75 46
0.88 4.6 150.88 4.6 15
1.34 5.5 191.34 5.5 19
1.94 7.0 251.94 7.0 25
2.66 8.5 312.66 8.5 31
4.36 394.36 39
3.45 10.0 353.45 10.0 35
5.39 445.39 44
0.95 4.6 150.95 4.6 15
1.39 5.8 191.39 5.8 19
1.91 7.0 231.91 7.0 23
2.45 8.8 282.45 8.8 28
3.14 10.7 313.14 10.7 31
3.89 343.89 345.56 445.56 44
0.0430.043
0.0370.037
0.0300.030
0.0240.024
0.0170.017
0.0060.006
06 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
2525
2727
3535
SLD/RLD - SUPPLY
*S.I. UNITS
HORIZONTAL DISCHARGE
SLD/RLD - SUPPLY
*S.I. UNITS
SYMBOLSL/S : Air volume in liter per second.
Ak : Effective face area in meter Square per 1000 mm.
Pt. : Total pressure in millimeters water gauge.
Th. : Throw in meters.
NC : Noise Criteria.
L/S : Air volume in liter per second.
Ak : Effective face area in meter Square per 1000 mm.
Pt. : Total pressure in millimeters water gauge.
Th. : Throw in meters.
NC : Noise Criteria.
NOTESThe large throw values are based on the minimum terminal velocity of 0.25m/Sec.The large throw values are based on the minimum terminal velocity of 0.25m/Sec.
The middle throw values are based on the middle terminal velocity of 0.50 m/Sec.The middle throw values are based on the middle terminal velocity of 0.50 m/Sec.
The small throw values are based on the maximum terminal velocity of 0.75m/Sec.The small throw values are based on the maximum terminal velocity of 0.75m/Sec.
**
**
**
16mm 16mm 20mm 25mm 25mm
SLOTS L/S L/S per per meter meter Ak Pt Pt Th Th NC NC Ak Ak Pt Pt Th Th NC Ak Pt Pt Th Th NC
3- . - .0.51 . 1 2 2 1 <150 3- . - .0.51 . 1 2 2 1 <150
- .5- .71.44 0.91 2 20- .5- .71.44 0.91 2 20
-2.4-4.02.04 1.2 26-2.4-4.02.04 1.2 26
-3.7-5.83.17 2.1 30-3.7-5.83.17 2.1 30
-4.6-7.34.55 3.4 34-4.6-7.34.55 3.4 34
-1.2-2.10.16 0.9 <15-1.2-2.10.16 0.9 <15
-2.7-4.60.65 0.9 16-2.7-4.60.65 0.9 16
-3.4-6.11.47 1.2 25-3.4-6.11.47 1.2 25
-4.9-7.92.57 2.1 32-4.9-7.92.57 2.1 32
-6.4-9.24.06 3.4 36-6.4-9.24.06 3.4 36
-1.2-3.10.33 0.9 <15-1.2-3.10.33 0.9 <15
-2.4-5.20.72 1.2 18-2.4-5.20.72 1.2 18
-3.7-6.41.27 1.5 25-3.7-6.41.27 1.5 25
-4.9-8.21.98 2.4 30-4.9-8.21.98 2.4 30
-6.1-9.53.02 3.7 34-6.1-9.53.02 3.7 34
-1.5-4.30.41 1.9 15-1.5-4.30.41 1.9 15
-2..7-5.20.72 1.2 20-2..7-5.20.72 1.2 20
3..7-6.11.12 1.5- 243..7-6.11.12 1.5- 24
.4.9-7.91.63 2.4- 28.4.9-7.91.63 2.4- 28
.4-9.52.20 3.4-6. 32.4-9.52.20 3.4-6. 32
.8-4.60.55 1.2-1. 17.8-4.60.55 1.2-1. 17
.1-5.50.84 1.8-3. 21.1-5.50.84 1.8-3. 21
.0-6.41.22 2.4-4. 24.0-6.41.22 2.4-4. 24
.2-7.91.66 2.8-5. 27.2-7.91.66 2.8-5. 27
.4-9.22.18 3.7-6. 31.4-9.22.18 3.7-6. 31
.8-4.30.65 1.2-1. 18.8-4.30.65 1.2-1. 18
.1-5.50.93 1.8-3. 22.1-5.50.93 1.8-3. 22
.0-6.71.27 2.4-4. 25.0-6.71.27 2.4-4. 25
.66 2.7-5.2-8.2 281. . .66 2.7-5.2-8.2 281. .
2 .11 3.4-6.4-9.5 30. . 2 .11 3.4-6.4-9.5 30. .
11
22
33
44
55
66
1.23 0.6-1.5-2.7 23 1.23 0.6-1.5-2.7 23
2.78 1.2-2.1-3.3 312.78 1.2-2.1-3.3 31
4.97 1.8-3.0-4.6 41 4.97 1.8-3.0-4.6 41
7.73 2.7 -4.3-7.0 487.73 2.7 -4.3-7.0 48
11.11 4.0-5.8-8.5 5411.11 4.0-5.8-8.5 54
0.39 1.2-1.8-2.7 16 0.39 1.2-1.8-2.7 16
1.59 1.5-3.3-5.5 251.59 1.5-3.3-5.5 25
3.58 1.8-4.0-7.3 393.58 1.8-4.0-7.3 39
6.27 2.7-6.1-9.4 506.27 2.7-6.1-9.4 50
9.92 4.0-7.6-11-.0 56 9.92 4.0-7.6-11-.0 56
0.80 1.2-1.8-3.7 210.80 1.2-1.8-3.7 21
1.75 1.8-3.0-6.1 29 1.75 1.8-3.0-6.1 29
3.09 2.1-4.3-7.6 393.09 2.1-4.3-7.6 39
4.84 3.0-6.1-9.7 484.84 3.0-6.1-9.7 48
7.38 4.3-7.3-11.3 53 7.38 4.3-7.3-11.3 53
1.00 1.5-2.1-4.9 241.00 1.5-2.1-4.9 24
1.75 1.8-3.3-6.1 311.75 1.8-3.3-6.1 31
2.73 2.1-4.3-7.3 382.73 2.1-4.3-7.3 38
3.97 3.0-6.1-9.4 443.97 3.0-6.1-9.4 44
5.36 4.0-7.6-11.3 505.36 4.0-7.6-11.3 50
1.34 1.8-2.4-5.5 261.34 1.8-2.4-5.5 26
2.06 2.4-3.7-6.7 332.06 2.4-3.7-6.7 33
2.98 3.0-4.6-7.6 382.98 3.0-4.6-7.6 38
4.05 3.7-6.4-9.7 434.05 3.7-6.4-9.7 43
5.31 4.3-7.6-11.0 495.31 4.3-7.6-11.0 49
1.59 1.8-2.7-5.5 28 1.59 1.8-2.7-5.5 28
2.27 2.4-3.7-6.7 35 2.27 2.4-3.7-6.7 35
3.09 3.0-4.9-7.9 39 3.09 3.0-4.9-7.9 39
4.05 3.3-6.4-10.0 444.05 3.3-6.4-10.0 44
5.16 4.0-7.6-11.3 485.16 4.0-7.6-11.3 48
0.79 0.3-1.2-2.4 180.79 0.3-1.2-2.4 18
1.78 0.9-1.8-3.0 251.78 0.9-1.8-3.0 25
3.18 1.5-2.7-4.3 333.18 1.5-2.7-4.3 33
4.95 2.4-4.0-6.4 384.95 2.4-4.0-6.4 38
7.11 3.7-5.2-7.9 437.11 3.7-5.2-7.9 43
0.25 0.9-1.5-2.4 <150.25 0.9-1.5-2.4 <15
1.02 1..2-3.0-5.2 201.02 1..2-3.0-5.2 20
2.29 1.5-3.7-6.7 312.29 1.5-3.7-6.7 31
4.01 2.4-5.5-8.5 404.01 2.4-5.5-8.5 40
6.35 3.7-7.0-10.1 456.35 3.7-7.0-10.1 45
0.51 0.9-1.5-3.4 170.51 0.9-1.5-3.4 17
1.12 1.5-2.7-5.5 231.12 1.5-2.7-5.5 23
1.98 1.8-4.0-7.0 311.98 1.8-4.0-7.0 31
3.10 2.7-5.5-8.8 383.10 2.7-5.5-8.8 38
4.72 4.0-6.7-10.4 424.72 4.0-6.7-10.4 42
0.64 1.2-1.8-4.6 190.64 1.2-1.8-4.6 19
1.12 1.5-3.0-5.5 251.12 1.5-3.0-5.5 25
1.75 1.8-4.0-6.7 301.75 1.8-4.0-6.7 30
2.54 2.7-5.5-8.5 352.54 2.7-5.5-8.5 35
3.43 3.7-7.0-10.4 403.43 3.7-7.0-10.4 40
0.86 1.5-2.1-4.9 210.86 1.5-2.1-4.9 21
1.32 2.1-3.4-6.1 261.32 2.1-3.4-6.1 26
1.91 2.7-4.3-7.0 301.91 2.7-4.3-7.0 30
2.59 3.4-5.8-8.8 342.59 3.4-5.8-8.8 34
3.40 4.0-7.0-10.1 393.40 4.0-7.0-10.1 39
1.02 1.5-2.4-4.9 221.02 1.5-2.4-4.9 22
1.45 2.1-3.4-6.1 281.45 2.1-3.4-6.1 28
1.98 2.7-4.6-7.3 311.98 2.7-4.6-7.3 31
2.59 3.0-5.8-9.1 352.59 3.0-5.8-9.1 35
3.30 3.7-7.0-10.4 383.30 3.7-7.0-10.4 38
2424
3535
4747
5959
7171
2424
4747
7171
9494
118118
4747
7171
9494
118118
142142
7171
9494
118118
142142
165165
9494
118118
142142
165165
189189
118118
142142
165165
189189
212212
0.0040.004
0.0010.001
0.0180.018
0.0240.024
0.0300.030
0.0370.037
0.0060.006
0.0180.018
0.0280.028
0.0380.038
0.0480.048
0.0580.058
0.0050.005
0.0140.014
0.0220.022
0.0300.030
0.0380.038
0.0460.046
CONDITIONSSupply
Horizontal Discharge flow pattern
Noise Criteria values are based on (10 db) room attenuation.
Damper is fully open.
The tested specimens were of 1000 mm length
Supply
Horizontal Discharge flow pattern
Noise Criteria values are based on (10 db) room attenuation.
Damper is fully open.
The tested specimens were of 1000 mm length
**
**
**
**
**
07 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
PERFORMANCE DATA
SLD/RLD - RETURN
*S.I. UNITS
16mm 16mm 20mm 25mm25mm
SLOTS L/S L/S per per meter meter Ps NCPs NC Ps NCPs NC Ps NC Ps NC
SYMBOLSL/S : Air volume in liter per second.
P/s : Negative static pressure in milimeters water gauge.
NC : Noise Criteria.
L/S : Air volume in liter per second.
P/s : Negative static pressure in milimeters water gauge.
NC : Noise Criteria.
CONDITIONSReturn
Damper is full open.
Noise Criteria values are based on(10 db) room attenuation
The tested specimens were of 1000mm length
Return
Damper is full open.
Noise Criteria values are based on(10 db) room attenuation
The tested specimens were of 1000mm length
*
*
*
*
3535
4747
5959
7171
8383
7171
8383
9494
118118
142142
9494
118118
142142
165165
212212
142142
165165
189189
236236
283283283283
142142
189189
236236
283283
330330
189189
236236
283283
330330
378378
1
2
33
4
5
6
3.38 243.38 24
5.95 315.95 31
9.13 409.13 40
13.81 4913.81 49
18.66 5518.66 55
3.97 243.97 24
5.80 315.80 317.19 367.19 36
11.11 4511.11 45
15.88 5315.88 53
3.97 253.97 25
8.94 398.94 39
12.14 4612.14 4620.16 5420.16 54
6.19 336.19 33
6.34 286.34 28
8.61 358.61 3511.11 4011.11 40
16.78 4816.78 48
24.92 5524.92 554.44 264.44 26
7.86 357.86 35
12.30 4312.30 43
17.66 4817.66 4824.02 5524.02 55
6.19 296.19 29
9.64 369.64 36
13.89 4413.89 44
18.86 4918.86 4924.69 5524.69 55
2.16 19
3.81 25
5.84 32
8.84 39
11.94 44
2.54 19
3.71 25
4.60 29
2.54 19
7.11 36
10.16 42
2.54 20
3.96 26
5.72 31
7.77 37
4.06 22
12.90 43
5.51 28
7.11 32
10.74 38
15.95 44
2.84 21
5.03 28
7.87 34
11.30 38
3.96 23
15.37 44
15.80 44
12.07 39
6.17 29
8.89 35
1.38 151.38 15
2.44 202.44 20
3.74 263.74 26
5.66 315.66 31
7.64 357.64 35
1.63 151.63 15
2.37 202.37 20
2.94 232.94 23
4.55 294.55 29
6.50 346.50 34
1.63 161.63 16
2.53 212.53 21
3.66 253.66 25
4.97 304.97 30
2.60 182.60 18
8.26 348.26 34
3.53 223.53 22
4.55 264.55 26
6.87 306.87 30
10.21 3510.21 35
1.82 171.82 17
3.22 223.22 22
5.04 275.04 27
7.23 307.23 30
2.53 182.53 18
9.84 359.84 35
10.11 3510.11 35
7.72 317.72 31
3.95 233.95 23
5.69 285.69 28
08 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
PERFORMANCE DATA
VERTICAL DISCHARGE
SYMBOLS
CFM : Air volume in cubic feet per minute.
Ak : Effective face area in meter Square feet per foot.
Pt. : Total pressure in inches water gauge.
Th. : Throw in feets.
NC : Noise Criteria.
CFM : Air volume in cubic feet per minute.
Ak : Effective face area in meter Square feet per foot.
Pt. : Total pressure in inches water gauge.
Th. : Throw in feets.
NC : Noise Criteria.
Supply
Vertical discharge flow pattern.
Noise Criteria values are based on(10 db) room attenuation.
Damper is fully open.
Throw values are based on terminal velocity of 75 fpm
The tested specimens were 3ft length
Supply
Vertical discharge flow pattern.
Noise Criteria values are based on(10 db) room attenuation.
Damper is fully open.
Throw values are based on terminal velocity of 75 fpm
The tested specimens were 3ft length
*
*
*
*
*
CONDITIONS
11
22
33
44
55
66
SLOTS SLOTS PerPer FootFoot k Ak A Pt Pt Th Th N CN C Ak Ak P tP t Th Th NC NC AtAt Pt Pt Th Th NC NC
3/5’’ 4/5’’ 1’’1’’
1515
2323
3030
3838
4545
5353
6060
1515
3030
4545
6060
7575
9090
105105
3030
4545
6060
7575
9090
105105
120120
4545
6060
7575
9090
105105
120120
135135
6060
7575
9090
105105
120120
135135
150150
7575
9090
105105
120120
135135
150150
*
CMFCMF
180180
0.0230.023
0.0520.052
0.0920.092
0.1440.144
0.2100.210
0.2850.285
0.3770.377
0.010
0.023
0.041
0.061
0.086
0.113
0.150
0.031
7
8
11
17
21
<15
<15
<15
18
23
26
30
9 <159 <15
18 2318 23
23 2923 29
3232
3737
0.0250.025
0.036 8 <150.036 8 <15
0.225 19 290.225 19 29
0.328 25 360.328 25 36
0.455 400.455 40
0.589 460.589 46
0.0200.020
0.0080.008
0.0300.030
0.1200.120
0.2700.270
0.3700.370
0.0310.031
0.0550.055
0.0860.086
0.1240.124
0.1680.168
0.2200.220
0.0190.019
0.0330.033
0.0520.052
0.0750.075
0.1020.102
0.1330.133
0.1700.170
0.0340.034
0.0490.049
0.0670.067
0.0870.087
0.1100.110
0.1360.136
0.0240.024
0.0350.035
0.0480.048
0.0620.062
0.0790.079
0.0980.098
0.006
0.012
0.039
0.082
0.126
0.194
0.266
0.009
0.024
0.038
0.081
0.109
0.142
0.009
0.020
0.036
0.043
0.077
0.102
0.121
0.013
0.021
0.039
0.051
0.069
0.074
0.111
0.017
0.026
0.0332.145
0.058
0.067
1.823
1.500
1.190
0.818
5
11
15
21
7
14
18
23
11
14
16
22
28
13
15
19
23
27
13
15
19
24
<15
<15
17
22
26
31
34
<15
16
20
24
27
<15
<15
<15
18
22
23
26
<15
<15
15
17
19
22
25
<15
<15
<15
16
17
18
0.048
7 <157 <15
15 <1515 <15
3939
4343
20 1820 18
26 2526 25
13 <1513 <15
16 <1516 <15
19 1819 18
25 2225 22
33 3314 <1514 <15
17 <1517 <15
21 1621 16
26 2126 21
2727
2929
2424
2727
14 <1514 <15
17 <1517 <15
21 <1521 <15
27 1827 18
2323
0.1730.173
0.1470.147
0.1210.121
0.0960.096
0.0660.066
0.013 8 <150.013 8 <15
0.047 17 170.047 17 17
0.105 21 230.105 21 230.188 28 350.188 28 35
0.292 33 410.292 33 41
0.422 490.422 49
0.578 540.578 54
0.022 10 <150.022 10 <15
0.048 17 170.048 17 17
0.086 22 230.086 22 23
0.134 29 310.134 29 31
0.194 34 380.194 34 38
0.263 430.263 430.344 480.344 48
0.030 15 <150.030 15 <15
0.052 18 170.052 18 17
0.081 22 230.081 22 23
0.117 28 280.117 28 28
0.159 34 340.159 34 34
0.208 360.208 36
0.266 410.266 41
0.034 16 <150.034 16 <15
0.053 19 160.053 19 16
0.077 23 200.077 23 20
0.136 0.136 33 33 3030
0.105 29 260.105 29 26
0.038 0.038 15 15 <15<15
0.055 0.055 19 19 1616
0.075 0.075 23 23 1919
0.097 0.097 30 30 2323
0.123 0.123 34 34 2626
0.153 0.153 2929
0.1380.138
0.1180.118
0.0970.097
0.0770.077
0.0530.053
0.213 0.213 3939
0.172 0.172 3434
25 2825 28
0.067 19 180.067 19 18
0.187 30 330.187 30 33
0.0140.014
31 3031 30
3434
3838
3131
0.0220.022
3030
21213232
26
0.049
<15
28
30
29
0.081 10 160.081 10 16
0.144 14 230.144 14 23
7 <157 <15
12 1812 18
0.219 0.219 3939 0.1400.140 3131
3131
0.106 25
SLD/RLD - SUPPLY
* IMPERIAL UNITS
09 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
15 15
99 <15<15
<15<15
HORIZONTAL DISCHARGE
SLD/RLD - SUPPLY
*IMPERIAL UNITS
SYMBOLSCFM : Air volume in cubic feet per minute.
Ak : Effective face area in meter Square feet per feet. Pt. : Total pressure in inches water gauge.
Th. : Throw in feet.
NC : Noise Criteria.
CFM : Air volume in cubic feet per minute.
Ak : Effective face area in meter Square feet per feet. Pt. : Total pressure in inches water gauge.
Th. : Throw in feet.
NC : Noise Criteria.
NOTESThe large throw values are based on the minimum terminal velocity of 50 fpm.The large throw values are based on the minimum terminal velocity of 50 fpm.
The middle throw values are based on the middle terminal velocity of 75 fpm.The middle throw values are based on the middle terminal velocity of 75 fpm.
The small throw values are based on the maximum terminal velocity of 150 fpm.The small throw values are based on the maximum terminal velocity of 150 fpm.
**
**
**
3/5”3/5” 4/5” 1”1”
SLOTS CFMCFM Per Per Foot Foot Ak Pt Pt Th Th NC NC Ak Ak Pt Pt Th Th NC Ak Pt Pt Th Th NC
0.020 1-3-7 <150.020 1-3-7 <15
0.045 3-5-9 170.045 3-5-9 17
0.080 5-8-13 230.080 5-8-13 23
0.125 7-12-19 270.125 7-12-19 27
0.179 10-15-23 310.179 10-15-23 31
0.006 3-5-7 <150.006 3-5-7 <15
0.026 3-9-15 <15 0.026 3-9-15 <15
0.058 4-11-20 22 0.058 4-11-20 22
0.101 7-16-25 29 0.101 7-16-25 29
0.160 10-21-30 33 0.160 10-21-30 33
0.013 3-5-10 <15 0.013 3-5-10 <15
0.028 4-8-15 15 0.028 4-8-15 15
0.050 5-12-21 22 0.050 5-12-21 22
0.078 8-16-26 27 0.078 8-16-26 27
0.119 -20-31 12 300.119 -20-31 12 30
0.016 3-5-13 <15 0.016 3-5-13 <15
0.028 4-9-16 17 0.028 4-9-16 17
0.044 5-11-20 21 0.044 5-11-20 21
0.064 8-16-25 25 0.064 8-16-25 25
0.086 10-21-31 29 0.086 10-21-31 29
0.022 4-6-14 <15 0.022 4-6-14 <15
0.033 6-10-18 18 0.033 6-10-18 18
0.048 8-12-21 21 0.048 8-12-21 21
0.065 10-17-26 24 0.065 10-17-26 24
0.086 11-21-30 28 0.086 11-21-30 28
0.026 4-7-14 <150.026 4-7-14 <15
0.036 6-10-18 19 0.036 6-10-18 19
0.050 8-13-21 22 0.050 8-13-21 22
0.065 9-17-27 25 0.065 9-17-27 25
0.083 11-21-31 27 0.083 11-21-31 27
11
22
33
44
55
66
0.048 1-4-8 170.048 1-4-8 17
0.109 4-7-11 260.109 4-7-11 26
0.195 6-10-15 360.195 6-10-15 36
0.305 9-15-23 430.305 9-15-23 43
0.438 14-19-29 490.438 14-19-29 49
0.063 5-11-19 200.063 5-11-19 20
0.141 6-13-25 340.141 6-13-25 34
0.247 10-20-30 450.247 10-20-30 45
0.391 14-25-35 510.391 14-25-35 51
0.031 4-6-12 160.031 4-6-12 16
0.069 6-10-20 240.069 6-10-20 24
0.122 7-15-25 340.122 7-15-25 34
0.191 10-20-32 430.191 10-20-32 43
0.039 5-7-17 190.039 5-7-17 19
0.069 6-11-19 260.069 6-11-19 26
0.108 7-15-24 330.108 7-15-24 33
0.156 10-20-30 390.156 10-20-30 39
0.211 14-25-37 450.211 14-25-37 45
0.053 6-8-18 210.053 6-8-18 21
0.081 8-13-22 280.081 8-13-22 28
0.117 10-16-25 330.117 10-16-25 33
0.159 13-21-32 380.159 13-21-32 38
0.209 15-25-36 440.209 15-25-36 44
0.063 6-10-18 230.063 6-10-18 23
0.089 8-12-23 300.089 8-12-23 30
0.122 10-17-27 340.122 10-17-27 34
0.159 11-21-33 390.159 11-21-33 39
0.203 13-25-37 430.203 13-25-37 43
0.031 1-4-8 <150.031 1-4-8 <15
0.070 3-6-10 210.070 3-6-10 21
0.125 5-9-14 290.125 5-9-14 29
0.195 8-13-21 340.195 8-13-21 34
0.280 12-17-26 390.280 12-17-26 39
0.010 3-5-8 <150.010 3-5-8 <15
0.040 4-10-17 160.040 4-10-17 16
0.090 5-12-22 270.090 5-12-22 27
0.158 8-18-28 360.158 8-18-28 36
0.250 12-23-33 410.250 12-23-33 41
0.020 3-5-11 <150.020 3-5-11 <15
0.044 5-9-18 190.044 5-9-18 19
0.078 6-13-23 270.078 6-13-23 27
0.122 9-18-29 340.122 9-18-29 34
0.186 13-22-34 380.186 13-22-34 38
0.025 4-6-15 150.025 4-6-15 15
0.044 5-10-18 210.044 5-10-18 21
0.069 6-13-22 260.069 6-13-22 26
0.100 9-18-28 310.100 9-18-28 31
0.135 12-23-34 360.135 12-23-34 36
0.034 5-7-16 170.034 5-7-16 17
0.052 7-11-20 220.052 7-11-20 22
0.102 11-19-29 300.102 11-19-29 30
0.134 13-23-33 350.134 13-23-33 35
0.040 5-8-16 180.040 5-8-16 18
0.057 7-11-20 240.057 7-11-20 24
0.078 9-15-24 270.078 9-15-24 27
0.102 10-19-30 310.102 10-19-30 31
0.130 12-23-34 340.130 12-23-34 34
1515
2323
3030
3838
4545
1515
3030
4545
6060
7575
3030
4545
6060
7575
9090
4545
6060
7575
9090
105105
6060
7575
9090
105105
120120
7575
9090
105105
120120
135135
0.0140.014
0.0360.036
0.0580.058
0.0780.078
0.0980.098
0.1180.118
0.0230.023
0.0560.056
0.0900.090
0.1210.121
0.1540.154
0.1850.185
0.0180.018
0.0450.045
0.0720.072
0.0970.097
0.1230.123
0.1480.148
CONDITIONSSupply
Horizontal Discharge flow pattern
Noise Criteria values are based on (10 db) room attenuation.
Damper is fully open.
The tested specimens were of 3ft length
Supply
Horizontal Discharge flow pattern
Noise Criteria values are based on (10 db) room attenuation.
Damper is fully open.
The tested specimens were of 3ft length
**
**
**
**
**
0.016 3-6-9 180.016 3-6-9 18
0.291 15-24-36 480.291 15-24-36 48
0.075 9-14-23 260.075 9-14-23 26
10 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
PERFORMANCE DATA
SLD/RLD - RETURN
*IMPERIAL UNITS*IMPERIAL UNITS
3/5’’3/5’’ 4/5’’ 1’’1’’
SLOTS CFM per footCFM per foot Ps NCPs NC Ps NCPs NC Ps NC Ps NC
SYMBOLSCFM : Air volume in cubic feet per minute.
P/s : Negative static pressure in inches water gauge.
NC : Noise Criteria.
CFM : Air volume in cubic feet per minute.
P/s : Negative static pressure in inches water gauge.
NC : Noise Criteria.
CONDITIONSReturn
Damper is full open.
Noise Criteria values are based on(10 db) room attenuation
The tested specimens were of 3ft length
Return
Damper is full open.
Noise Criteria values are based on(10 db) room attenuation
The tested specimens were of 3ft length
*
*
*
*
2323
3030
3838
4545
5353
4545
5353
6060
7575
9090
6060
7575
9090
105105
135135
9090
105105
120120
150150
180180
9090
120120
150150
180180
210210
120120
150150
180180
210210
240240
1
2
33
4
5
6
0.133 190.133 19
0.234 260.234 26
0.359 350.359 35
0.544 440.544 44
0.734 500.734 50
0.156 190.156 19
0.228 260.228 260.283 310.283 31
0.438 400.438 40
0.625 480.625 48
0.156 200.156 20
0.352 340.352 34
0.478 410.478 410.794 490.794 49
0.244 280.244 28
0.250 230.250 23
0.339 300.339 300.438 350.438 35
0.661 430.661 43
0.981 500.981 500.175 210.175 21
0.309 300.309 30
0.484 38 0.484 38
0.695 430.695 430.945 500.945 50
0.244 240.244 24
0.380 310.380 31
0.547 390.547 39
0.742 440.742 440.972 500.972 50
0.085 15
0.150 21
0.230 28
0.348 35
0.470 40
0.100 15
0.146 21
0.181 25
0.280 32
0.400 38
0.100 16
0.156 22
0.225 27
0.306 33
0.160 18
0.508 39
0.217 24
0.280 28
0.423 34
0.628 40
0.112 17
0.198 24
0.310 30
0.445 34
0.156 19
0.605 40
0.622 40
0.475 35
0.243 25
0.350 31
0.054 <150.054 <15
0.096 170.096 17
0.147 220.147 22
0.233 280.233 28
0.301 320.301 32
0.064 <150.064 <15
0.093 170.093 17
0.116 200.116 20
0.179 260.179 26
0.256 300.256 30
0.064 <150.064 <15
0.100 180.100 18
0.144 220.144 22
0.196 260.196 26
0.102 <150.102 <15
0.325 310.325 31
0.139 190.139 19
0.179 220.179 22
0.271 270.271 27
0.402 320.402 32
0.072 <150.072 <15
0.127 190.127 19
0.198 240.198 24
0.285 270.285 27
0.100 150.100 15
0.387 320.387 32
0.398 320.398 32
0.304 280.304 28
0.156 200.156 20
0.224 250.224 25
11 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICEALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE