iccs18 program mod - mercaturaevents.mercatura.pt/iccs18/iccs18_program_mod.pdf · ! 1! iccs18...

1

ICCS18 Program

18th International Conference on Composite Structures

General Information

Venue: EPIC SANA Lisboa HOTEL (near Amoreiras Shopping Mall) Av. Engenheiro Duarte Pacheco 15, 1070-100 Lisboa, Portugal www.lisboa.epic.sanahotels.com Registration opens from 08h00 to 18h00, June 15 to Jun 18 (floor -1) Pre-Registration on Sunday 14 June from 16h00 to 18h00 Coffee-break 10h30-11h00 and 16h00 to 16h30, June 15 to Jun 18 (floor -1) Lunch-break 13h00 to 14h00, June 15 to Jun 18 (floor -1) Welcome drink Monday June 15 @ 19h00-20h00 (floor -1) Banquet Wednesday June 17 @ 20h00 @ Estufa Fria, location details at the registration desk (ticket required) Lecture rooms are located in floors -1 and +1

2

Opening Ceremony

( Room MORUS IV, floor -1 )

Monday June 15 - 08h45 (Conference Chair)

PLENARY LECTURES ( Room MORUS IV, floor -1 )

Monday 15 June Chair: Y. Narita, Japan 09h00 6980 | Composite Notch Behaviour - From Coupon to Airbus A350XWB Laurent Risse ([email protected]), Airbus, France Ian Lane ([email protected]), Airbus, United Kingdom 09h30 8926 | FE Shell Formulations for Layered Composite Structures Cinefra Maria ([email protected]), Politecnico di Torino, Italy 10h00 8891 | Design and failure prediction of composite repair systems for corroded pipelines Reis, João M.L. ([email protected]), UFF - Universidade Federal Fluminense, Brazil

Tuesday 16 June

Chair: E. Carrera, Italy 08h30 8935 | Modeling the effects of cure induced chemo-mechanical processes on the strength of fiber reinforced composites Waas, Anthony M. ([email protected]), University of Michigan, United States America 09h00 9017 | STRUCTURAL COMPOSITE MATERIALS FOR AEROSPACE APPLICATION. MAIN ACHIEVEMENTS AND FUTURE TRENDS Cinquin, Jacques ([email protected]), AIRBUS, France 09h30 8951 — Cork in composite structures: from low to high energy dynamics Teixeira-Dias, F. ([email protected]), The University of Edinburgh, United Kingdom 10h00 6982 | Computational Materials Design on Polymer-Matrix Composites Rabczuk, Timon ([email protected]), Bauhaus--University Weimar, Germany Msekh, Mohammed A. ([email protected]), Bauhaus--University Weimar, Germany Silani, Mohammad ([email protected]), Bauhaus--University Weimar, Germany

3

Wednesday 17 June

Chair: O. Polit, France 08h30 Auxetics in composite structures: microarchitectures and performance Fabrizio Scarpa, University of Bristol, UK 09h00 7759 | Composite structures for proton exchange membrane fuel cells (PEMFC) and energy storage systems (ESS) Dai Gil Lee ([email protected]), KAIST, Korea, South Jun Woo Lim ([email protected]), Chonbuk National University, Korea, South Minkook Kim ([email protected]), KAIST, Korea, South Jaeheon Choe ([email protected]), KAIST, Korea, South Soohyun Nam ([email protected]), KAIST, Korea, South Bu Gi Kim ([email protected]), Standard Energy Co., Ltd., Korea, South Ki Hyun Kim ([email protected]), Standard Energy Co., Ltd., Korea, South 09h30 8281 | Layerwise Optimization and New Extensions for Lay-up Design Problems of Laminated Composite Plates and Shells Narita, Yoshihiro ([email protected]), Hokkaido University, Japan 10h00 9380 | Nonlocal effects in composites Feo, L. ([email protected]), University of Salerno, Italy Luciano, Raimondo ([email protected]), University of Cassino, Italy

Thursday 18 June

Chair: A. Waas, USA 08h30 Modeling of FG-CNT reinforced composite structures KM Liew and LW Zhang, City University of Hong Kong, China 09h00 Theoretical and numerical models for composite structures Olivier Polit, University of Paris, France 09h30 8898 | NON-LINEARITY AND ANISOTROPY AT NANOSCALE Silvestre, Nuno ([email protected]), IST - UNIVERSITY OF LISBON, Portugal 10h00 9474 | Active Morphing Composites and Structures: Challenge and Prospect Leng JS ([email protected]), Harbin Institute of Technology, China

4

Parallel Sessions (every paper 20 minutes, including 5 minutes discussion)

MONDAY 15 June Room MORUS IV

Session 2 - Analysis of composite beams, plates and shells, Organizer: Erasmo Carrera,

Politecnico di Torino, Italy Session 2.1 | Chairs: Rainer Groh (University of Bristol, UK) and Alberto Milazzo (University of Palermo, Italy) 11h00 6852 | Equilibrium of a Guastavino helical stair Angelillo, Maurizio ([email protected]), University of Salerno, Italy 11h20 7611 | A mixed variational, higher order zig-zag theory for highly heterogeneous layered structures Rainer MJ Groh ([email protected]), University of Bristol, United Kingdom Paul M Weaver ([email protected]), University of Bristol, United Kingdom 11h40 7791 | Analysis of Composite Plates with Stiffener Run-Out by pb - 2 Rayleigh Ritz Method Oliveri, V. ([email protected]), University of Enna , Italy Alaimo, A. ([email protected]), University of Enna , Italy Orlando, C. ([email protected]), University of Enna , Italy Milazzo, A. ([email protected]), University of Palermo, Italy 12h00 7870 | Finite elements for nonlinear free vibrations analysis of smart laminates subjected to in-plane loadings Milazzo, A. ([email protected]), University of Palermo, Italy Alaimo, A. ([email protected]), University of Enna "Kore", Italy Oliveri,V. ([email protected]), University of Enna "Kore", Italy 12h20 8597 | Variable kinematics models for buckling and vibration of multilayered panels D’Ottavio, Michele ([email protected]), Université Paris Ouest Nanterre La Défense, France Polit, Olivier ([email protected]), Université Paris Ouest Nanterre La Défense, France 12h40 9617 | Ply optimization of variable stiffness composite laminates based on density distribution curve method Liu,Zhe ([email protected]), Tsinghua University, China Fan,Zhirui ([email protected]), North University of China, China Session 2.2 | Chairs: Erasmo Carrera (Politecnico di Torino) and Maria Cinefra (Politecnico di Torino, Italy) 14h00 9024 | Predicting Mechanical Behaviour of Tidal Turbine Blade Made of Composite Materials Using Finite Element Code (ANSYS) Hassan Izadi Gonabadi ([email protected]), Newcastle University, United Kingdom Noushin Moharrami ([email protected]), Newcastle University, United Kingdom Adrian Oila ([email protected]), Newcastle University, United Kingdom Steve Bull ([email protected]), Newcastle University, United Kingdom 14h20 8885 | Vibration of thin-walled laminated composite beams having open and closed sections Sheikh, Abdul Hamid ([email protected]), University of Adelaide, Australia Asadi, Arash ([email protected]), University of Adelaide, Australia Thomsen, Ole Thybo ([email protected]), University of Southampton, United Kingdom

5

14h40 6367 | Analysis of cylindrical sandwich structures under moving loads Toubia,Elias ([email protected]), The University of Dayton, United States America El Mir,Charles ([email protected]), The University of Dayton, United States America Brockman, Robert ([email protected]), The University of Dayton, United States America 15h00 7776 | Adaption of the FIB bulletin 14 design guideline for externally bonded bending reinforcement made of a Textile Reinforced Cement composite Verbruggen, Svetlana ([email protected]), Vrije Universiteit Brussel, Belgium Tysmans, Tine ([email protected]), Vrije Universiteit Brussel, Belgium Wastiels, Jan ([email protected]), Vrije Universiteit Brussel, Belgium De Sutter, Sven ([email protected]), Vrije Universiteit Brussel, Belgium Woźniak, Maciej ([email protected]), Vrije Universiteit Brussel, Belgium 15h20 9221 | Experimental Testing of Bridge Deck Slabs Reinforced with Basalt FRP Fadi Alsharif ([email protected]), HBM Engineering Group, LLC, United States America Mohsen Issa ([email protected]), University of Illinois at Chicago, United States America 15h40 9554 | Free vibration analysis of simply supported composite sandwich beams with a graded lattice core Zhighai Wang ([email protected]), Harbin University of Science and Technology, China Guo-dong Xu ([email protected]), Harbin University of Science and Technology, China Tao Zeng ([email protected]), Harbin University of Science and Technology, China Su Cheng ([email protected]), Harbin University of Science and Technology, China Session 2.3 | Chairs: Erasmo Carrera (Politecnico di Torino) and Maria Cinefra (Politecnico di Torino, Italy) 16h30 9210 | A multilayered plate theory with transverse shear and normal warping functions Loredo A. ([email protected]), Université de Bourgogne, France 16h50 9191 | Bending deflection of sandwich beams considering local effects Anghel Cernescu ([email protected]), Aalto University, Finland Jani Romanoff ([email protected]), Aalto University, Finland 17h10 8971 | Vibration Analysis and Genetic Algorithm Optimization for Control of a Composite Structure with Piezoelectric Elements Subject to Impact Djojodihardjo, Harijono ([email protected]), Universitas Al-zhar Indonesia, Indonesia 17h30 8963 | ANALYSIS OF STRENGTH DEGRADATION OF LATTICE COMPOSITE FUSELAGE SECTION CONTAINING RIBS WITH DELAMINATION Dubovikov, Evgeny ([email protected]), Central Aerohydrodynamic Institute (TsAGI), Russian Federation Fomin, Victor ([email protected]), Central Aerohydrodynamic Institute (TsAGI), Russian Federation Mareskin, Ivan ([email protected]), Central Aerohydrodynamic Institute (TsAGI), Russian Federation 17h50 9068 | EXPERIMENTAL TESTS OF SANDWICH COMPOSITE STRUCTURES IN FOOTBRIDGE DESIGN PROCESS Pyrzowski, Łukasz ([email protected]), Gdańsk University of Technology, Poland Rucka, Magdalena ([email protected]), Gdańsk University of Technology, Poland Ferenc, Tomasz ([email protected]), Gdańsk University of Technology, Poland Chróścielewski, Jacek ([email protected]), Gdańsk University of Technology, Poland 18h10 9071 | Validation tests of full scale footbridge sandwich segment Ferenc, Tomasz ([email protected]), Gdansk University of Technology , Poland Mikulski, Tomasz ([email protected]), Gdansk University of Technology , Poland Miśkiewicz, Mikołaj ([email protected]), Gdansk University of Technology , Poland Pyrzowski, Łukasz ([email protected]), Gdansk University of Technology , Poland

6

18h30 7054 | Experimental investigation of failure process of the compressed channel-section GFRP laminate columns assisted with the Acoustic Emission method Kubiak Tomasz ([email protected]), Lodz University of Technology, Poland Samborski Sylwester ([email protected]), Lublin University of Technology, Poland Teter Andrzej ([email protected]), Lublin University of Technology, Poland

MONDAY 15 June Room VITUS I

Session 6 – Composite Structures in Civil Engineering

Session 6.1 | Chairs: Capozucca, R. (Polytechnic University of Marche, Italy) and Correia, João R. (ICIST, IST, Universidade de Lisboa, Portugal) 11h00 9220 | Design of Retrofit CFRP System for Pier Caps of I-88 Bridge over Fox River Mohsen Issa ([email protected]), University of Illinois at Chicago, United States America Elias Ajami ([email protected]), Illinois Toll way Authority, United States America 11h20 9145 | Research on the Constraint Effect of GFRP Grid Beam Filled with Concrete Mao,Jize ([email protected]), Harbin Engineering University, Harbin, China Zhang,Shuai ([email protected]), Harbin Engineering University, Harbin, China Jin,Huiying ([email protected]), Harbin Engineering University, Harbin, China Guo,Qingyong ([email protected]), Harbin Engineering University, Harbin, China 11h40 9009 | Research on the FRP deck panel for road bridge application Siwowski, Tomasz W. ([email protected]), Rzeszow University of Technology, Poland Kulpa, Maciej ([email protected]), Rzeszow University of Technology, Poland 12h00 9000 | NONLINEAR MICROMECHANICAL MODELING OF TUFF STONE MASONRY FOR DYNAMIC RESPONSE ANALYSIS Balestrieri, Claudio ([email protected]), of Naples Federico II, Italy Parisi, Fulvio ([email protected]), University of Naples Federico II, Italy Asprone, Domenico ([email protected]), University of Naples Federico II, Italy 12h20 8966 | Eccentric compression performance of laminated bamboo column Haitao Li ([email protected]), Nanjing Forestry University, China Jingwen Su ([email protected]), Nanjing Forestry University, China 12h40 9549 | Parametric study of net section failure of pultruded connections with three-dimensional finite element approach Girao Coelho, Ana M ([email protected]), University of Warwick, United Kingdom Mottram, JT ([email protected]), University of Warwick, United Kingdom Harries, KA ([email protected]), University of Pittsburgh, United States America Girao Coelho, Ana M ([email protected]), University of Warwick, United Kingdom Mottram, JT ([email protected]), University of Warwick, United Kingdom Harries, KA ([email protected]), University of Pittsburgh, United States America

7

Session 6.2 | Chairs: Capozucca, R. (Polytechnic University of Marche, Italy) and Correia, João R. (ICIST, IST, Universidade de Lisboa, Portugal) 14h00 8567 | Theoretical and numerical analysis of RC beams externally strengthened with SRG and SRP systems tested to flexure Bencardino, Francesco ([email protected]), University of Calabria, Italy Condello, Antonio ([email protected]), University of Calabria, Italy Spadea, Giuseppe ([email protected]), University of Calabria, Italy 14h20 8847 | Beam-to-column bolted connections between GFRP pultruded tubular members: Experimental tests and numerical modeling Martins, David ([email protected]), ICIST, IST, Universidade de Lisboa, Portugal Proença, Miguel ([email protected]), IST, Universidade de Lisboa, Portugal Arruda, Mário ([email protected]), ICIST, IST, Universidade de Lisboa, Portugal Correia, João R. ([email protected]), ICIST, IST, Universidade de Lisboa, Portugal Ferreira, João F. ([email protected]), ICIST, IST, Universidade de Lisboa, Portugal Silvestre, Nuno ([email protected]), LAETA, IST, Universidade de Lisboa, Portugal 14h40 5455 | A Double-Composite Rectangular Truss Bridge and its Joint Analysis Yongjian LIU ([email protected]), Chang’an University, School of Highway, China Zhihua XIONG ([email protected]), Chang’an University, School of Highway, China Ge LIU ([email protected]), Chang’an University, School of Highway, China Gao CHENG ([email protected]), Chang’an University, School of Highway, China Yalin LUO ([email protected]), Chang’an University, School of Highway, China 15h00 7699 | FIRST EXPERIMENTAL RESULTS ON THE MECHANICAL BEHAVIOUR OF “PULTRUDED” BEAMS REALIZED BY BONDING MODULAR PLATES Ascione Francesco ([email protected]), University of Salerno (Italy), Italy Lamberti Marco ([email protected]), University of Salerno (Italy), Italy Lebon Frederic ([email protected]), CNRS, France Maurel-Pantel Aurelien ([email protected]), CNRS, France Spadea Saverio ([email protected]), University of Salerno (Italy), Italy 15h20 7149 | Mechanical properties of FRP anchors for masonry and concrete strengthening Francesca Giulia Carozzi ([email protected]), Politecnico di Milano, Italy Pierluigi Colombi ([email protected]), Politecnico di Milano, Italy Carlo Poggi ([email protected]), Politecnico di Milano, Italy 15h40 7150 | Out-of-plane strengthening of masonry panel with fabric reinforced cementitious matrix (FRCM) systems Francesca Giulia Carozzi ([email protected]), Politecnico di Milano, Italy Pierluigi Colombi ([email protected]), Politecnico di Milano, Italy Carlo Poggi ([email protected]), Politecnico di Milano, Italy Session 6.3 | Chairs: Capozucca, R. (Polytechnic University of Marche, Italy) and Silvestre, N. (IST - UNIVERSITY OF LISBON, Portugal) 16h30 7694 | Static behaviour of GFRP pultruded profile-concrete composite beams Jurkiewiez, Bruno ([email protected]), Université Lyon 1, France Koaik, Alaa ([email protected]), Université Lyon 1, France Bel, Sylvain ([email protected]), Université Lyon 1, France 16h50 6726 | Reinforcement of cement mortars through recycled nylon fibers Spadea, Saverio ([email protected]), University of Salerno, Italy Farina, Ilenia ([email protected]), University of Salerno, Italy Fraternali, Fernando ([email protected]), University of Salerno, Italy

8

17h10 7790 | Design, Modelling and Numerical Testing of 5-Box GFRP Shell Footbridge Klasztorny, Marian ([email protected]), Military University of Technology, Faculty of Mechanical Engineering, Department of Mechanics and Applied Computer Science, Poland Nycz, Daniel ([email protected]), DES ART Co., Sanok, Poland 17h30 8027 | The study on the properties of polymer concrete with various curing temperature for application to rail slab track with reduced rolling noise generation Jeon, Eun-Beom ([email protected]), Hanyang University, Korea, South Ahn, SangKeun ([email protected]), Hanyang University, Korea, South Koh, Hyo-In ([email protected]), Korea Railroad Research Institute, Korea, South Park, Junhong ([email protected]), Hanyang University, Korea, South Kim, Hak-Sung ([email protected]), Hanyang University, Korea, South 17h50 8672 | NEW AND EMERGING COMPOSITE TECHNOLOGIES FOR CIVIL INFRASTRUCTURE Aravinthan, Thiru ([email protected]), University of Southern Queensland, Australia Manalo, Allan C. ([email protected]), University of Southern Queensland, Australia 18h10 8693 | Flexural strength and ductility of reinforced and partially prestressed concrete sections with corrugated steel web(s) Au, Francis T.K. ([email protected]), Department of Civil Engineering, The University of Hong Kong, Hong Kong Chen, Xiachun ([email protected]), Department of Civil Engineering, The University of Hong Kong, Hong Kong Bai, Zhizhou ([email protected]), Department of Bridge Engineering, Tongji University, China Li, Zhenhu ([email protected]), Department of Civil Engineering, The University of Hong Kong, Hong Kong 18h30 9091 | Seismic resistance of GFRP reinforced concrete columns Tavassoli, Arsalan ([email protected]), University of Toronto, Canada Sheikh, Shamim A. ([email protected]), University of Toronto, Canada

MONDAY 15 June Room VITUS II

Session 8 – Durability and Ageing of Composite Materials, organized by Marco Gigliotti

(ENSMA, France)

Session 8.1 | Chairs: Gigliotti, Marco (ENSMA, UPR, France) and Jacquemin, Frédéric (Université de Nantes, France) 11h00 9553 | Optimum graphite foil coating on carbon/epoxy composite bipolar plates for vanadium redox flow batteries Choe, Jaeheon ([email protected]), KAIST, Korea, South Lim, Jun Woo ([email protected]), Chonbuk National University, Korea, South Kim, Minkook ([email protected]), KAIST, Korea, South Kim, Jinwhan ([email protected]), KAIST, Korea, South Lee, Dai Gil ([email protected]), KAIST, Korea, South 11h20 7903 | Numerical studies of the coupling between water absorption and mechanical state based on the free volume theory Péret, Thomas ([email protected]), IRT Jules Verne, France Clement, Alexandre ([email protected]), Université de Nantes, France Fréour, Sylvain ([email protected]), Université de Nantes, France Jacquemin, Frédéric ([email protected]), Université de Nantes, France

9

11h40 7907 | Validation of a generic tool of kinetic simulation of polymer ageing Ben Hassine, Mouna ([email protected]), EDF R&D_Matériaux et mécanique des composants (MMC), France Maurin, Romain ([email protected]), EDF R&D_Matériaux et mécanique des composants (MMC), France Marque, Grégory ([email protected]), EDF R&D_Matériaux et mécanique des composants (MMC), France 12h00 7973 | On The Long-term Behavior of Glass Fiber Reinforced Polyester Pipes Rafiee, Roham ([email protected]), Composites Research Laboratory, Faculty of New Sciences & Technologies, University of Tehran, Tehran, Iran Mazhari, Behzad ([email protected]), Composites Research Laboratory, Faculty of New Sciences & Technologies, University of Tehran, Tehran, Iran 12h20 8031 | Species diffusion in textile composite materials Gigliotti, Marco ([email protected]), Department of Physic and Mechanics of Materials, Institut P’ CNRS, Université de Poitiers, ENSMA, UPR, France Simar, Aline ([email protected]), Aircelle, groupe Safran, France Beringhier, Marianne ([email protected]), Université de Poitiers, France Grandidier, Jean-Claude ([email protected]), Université de Poitiers, ENSMA, France Ammar-Khodja, Isabelle ([email protected]), Aircelle, groupe Safran, France 12h40 8113 | A numerical method to deal with stochastic transient uncoupled hygro-elastic problems: application to glass fiber reinforced polyamide composites Clement Alexandre ([email protected]), GeM Université de Nantes, France Obeid Hassan ([email protected]), GeM Université de Nantes, France Fréour Sylvain ([email protected]), GeM Université de Nantes, France Jacquemin Frédéric ([email protected]), GeM Université de Nantes, France Session 8.2 | Chairs: Gigliotti, Marco (ENSMA, UPR, France) and Jacquemin, Frédéric (Université de Nantes, France) 14h00 8802 | Durability of cement and geopolimer composites Tomasz Blaszczynski ([email protected]), Poznan University of Technology, Poland Maciej Krol ([email protected]), Koszalin University of Technology, Poland 14h20 8044 | Towards a strain rate and water ageing sensitive constitutive modelling: Effects of strain rate and water ageing upon the properties of epoxy resin matrix for composites Quino, Gustavo ([email protected]), University of Oxford, United Kingdom Tagarielli, Vito ([email protected]), Imperial College, United Kingdom Petrinic, Nik ([email protected]), University of Oxford, United Kingdom 14h40 8103 | Structural deformation assessment of glass fibre reinforced polymers subjected to hygrothermal ageing Grammatikos, Sotirios A. ([email protected]), University of Bath, Bath, United Kingdom Ball, Richard J. ([email protected]), University of Bath, Bath, United Kingdom Evernden, Mark ([email protected]), University of Bath, Bath, United Kingdom 15h00 9289 | Accelerated Ageing of Pultruded Fibre Reinforced Polymers: Physical and Mechanical Characterization Zafari, Behrouz ([email protected]), The University of Warwick, United Kingdom Mottram, Toby ([email protected]), The University of Warwick, United Kingdom

10

MONDAY 15 June Room VITUS II

Session 40 – Delamination

Session 40.1 | Chairs: Jiye Chen, University of Portsmouth, United Kingdom 16h30 7643 | An extended cohesive damage model for predicting multiple crack propagation in composite structures J Chen and X Li ([email protected]), University of Portsmouth, United Kingdom 16h50 9532 | FLOCK FIBER REINFORCED LAMINAR COMPOSITES FOR IMPROVED INTERLAMINAR SHEAR STRENGTH Rice, John M. ([email protected]), UMass Dartmouth, United States America Kim, Yong K. ([email protected]), UMass Dartmouth, United States America Chalivendra, Vijaya ([email protected]), UMass Dartmouth, United States America Lewis, Armand F. ([email protected]), Umass Dartmouth, United States America 17h10 8984 | NUMERICAL APPROACHES FOR DELAMINATION IN CARBON-CARBON COMPOSITE LAMINATES Airoldi, Alessandro ([email protected]), Belotti, Paolo ([email protected]) Panichelli, Paolo ([email protected]), Politecnico di Milano, Italy 17h30 8972 | Mixed mode I/II delamination growth of multidirectional composites with different delaminating interfaces Zhao L.B. ([email protected]), School of Astronautics, Beihang University, Beijing 100191, PR China, China Wang Y.N. ([email protected]), School of Astronautics, Beihang University, Beijing 100191, PR China, China Zhang J.Y. ([email protected]), College of Aerospace Engineering, Chongqing University, Chongqing 400044, PR China, China Gong Y. ([email protected]), School of Astronautics, Beihang University, Beijing 100191, PR China, China 17h50 7649 | AN EXTENDED FINITE ELEMENT MODEL FOR THE DELAMINATION ANALYSIS OF COMPOSITE LAMINATES Yazdani, Saleh ([email protected]), Leibniz Universität Hannover, Germany Rust, Wilhelm J.H. ([email protected]), Hochschule Hannover, Germany Wriggers, Peter ([email protected]), Leibniz Universität Hannover, Germany 18h10 8056 | Comparison of numerical and local partition methods in ADCB specimens Mollon, Victoria ([email protected]), University of Oviedo, Spain Bonhomme, Jorge ([email protected]), University of Oviedo, Spain Elmarakbi, Ahmed ([email protected]), University of Sunderland, United Kingdom Viña, Jaime ([email protected]), University of Oviedo, Spain Argu ̈elles, Antonio ([email protected]), University of Oviedo, Spain 18h30 8147 | Mode III of fracture in composites. A new device and formulations López-Menéndez, A. ([email protected]), University of Oviedo, Spain Viña, J. ([email protected]), University of Oviedo, Spain Argu ̈elles, A. ([email protected]), University of Oviedo, Spain Bonhomme, J. ([email protected]), University of Oviedo, Spain Mollón, V. ([email protected]), University of Oviedo, Spain Lozano, M. ([email protected]), University of Oviedo, Spain 18h50 7645 | An extended cohesive damage element for simulating arbitrary damage propagation in fibre composites X Li and J Chen ([email protected]), University of Portsmouth, United Kingdom

11

MONDAY 15 June Room VITUS III

Session 11 – FRP reinforced concrete structures

Session 11.1 | Chairs: Torres, Lluís (University of Girona, Spain) 11h00 9080 | Interfacial Bond-Slip Behavior of Near Surface-Mounted FRP Plate in Concrete Seo, Soo-yeon ([email protected]), Korea National University, Korea, South 11h20 6531 | Numerical Simulation of the Fatigue Bond Behavior of Near surface mounted (NSM) FRP reinforcement Wang, Zeyuan ([email protected]), Tsinghua University, China Cheng, Lijuan ([email protected]), UC Davis, United States America Feng, Peng ([email protected]), Tsinghua University, China 11h40 7580 | The Issues Related to Flexural Behaviour of FRP Prestressed Concrete Beams Atutis, Mantas ([email protected]), Vilnius Gediminas technical university, Lithuania Atutis, Edgaras ([email protected]), Vilnius Gediminas technical university, Lithuania Valivonis, Juozas ([email protected]), Vilnius Gediminas technical university, Lithuania 12h00 7719 | RC beams strengthened with NSM GFRP rods Capozucca, R. ([email protected]), Polytechnic University of Marche, Italy Bossoletti, S. ([email protected]), Polytechnic University of Marche, Italy Corina, V. ([email protected]), Polytechnic University of Marche, Italy 12h20 7862 | Anchoring element for prestressed FRP reinforcement – functionality and design Girgle F. ([email protected]), Brno University of Technology, Czech Republic Prokes J. ([email protected]), PREFA KOMPOZITY Corp., Czech Republic Danek P. ([email protected]), Brno University of Technology, Czech Republic Stepanek P. ([email protected]), Brno University of Technology, Czech Republic 12h40 7881 | Characterisation of microstructural evolutions in high alumina refractory castables reinforced with carbon fibers Boris, Renata ([email protected]), Vilnius Gediminas Technical University, Vilnius, Lithuania Madej, Dominika ([email protected]), AGH University of Science and Technology, Krakow, Poland Antonovič, Valentin ([email protected]), Vilnius Gediminas Technical University, Vilnius, Lithuania Szczerba, Jacek ([email protected]), AGH University of Science and Technology, Krakow, Poland Keriene, Jadvyga Regina, Vilnius Gediminas Technical University, Lithuania Session 11.2 | Chairs: Reis, João M.L. (UFF - Universidade Federal Fluminense, Brazil) 14h00 8617 | Textile based lightweight shell in hybrid prefabricated construction Petzoldt, Carolin ([email protected]), Technische Universität Chemnitz, Germany Röhrkohl, Meike ([email protected]), Technische Universität Chemnitz, Germany Freund, Johannes ([email protected]), Technische Universität Chemnitz, Germany Funke, Henrik ([email protected]), Technische Universität Chemnitz, Germany Gelbrich, Sandra ([email protected]), Technische Universität Chemnitz, Germany Kroll, Lothar ([email protected]), Technische Universität Chemnitz, Germany

12

14h20 8047 | Multi-objective weight and cost optimisation of hybrid composite-concrete beams De Munck, Matthias ([email protected]), Vrije Universiteit Brussel, Belgium De Sutter, Sven ([email protected]), Vrije Universiteit Brussel, Belgium Verbruggen, Svetlana ([email protected]), Vrije Universiteit Brussel, Belgium Tysmans, Tine ([email protected]), Vrije Universiteit Brussel, Belgium Filomeno Coelho, Rajan ([email protected]), Université Libre de Bruxelles, Belgium 14h40 8295 | Steel-CFRP Composite Bars as Shear Reinforcement for RC T-Beams Fahmy, Mohamed F.M. ([email protected]), International Institute for Urban Systems Engineering, Southeast University, China Abd-ElShafy, Zainab E. ([email protected]), Faculty of Engineering, Assiut University, Egypt 15h00 8180 | Influence of recycled aggregate on bond behaviour between recycled aggregate concrete and fibre reinforced polymer bars Baena, Marta ([email protected]), University of Girona, Spain Torres, Lluís ([email protected]), University of Girona, Spain Turon, Albert ([email protected]), University of Girona, Spain Comas, Jordi ([email protected]), University of Girona, Spain Barris, Cristina ([email protected]), University of Girona, Spain Vilanova, Irene ([email protected]), University of Girona, Spain 15h20 8615 | Chloride Resistance of Engineered Cementitious Composites containing Palm Oil Fuel Ash Nurdeen, Altwair M. ([email protected]), Al-Merghab University Al-Khoms, Libya Krem, Mohamed A. ([email protected]), Al-Merghab University Al-Khoms, Libya Omeman, Zkaria M. ([email protected]), Al-Merghab University Al-Khoms, Libya 15h40 8639 | Use of prestressed CFRP strips for flexural strengthening of RC slabs with the NSM method Przygocka, Marta ([email protected]), Lodz University of Technology, Poland Lasek, Krzysztof ([email protected]), Lodz University of Technology, Poland Kotynia, Renata ([email protected]), Lodz University of Technology, Poland Session 11.3 | Chairs:, João M.L. (UFF - Universidade Federal Fluminense, Brazil) 16h30 9144 | Study on Flexural Performance of GFRP Grid and Concrete Composite Beam Mao, JIze ([email protected]), Harbin Engineering University, China Jin, Huiying ([email protected]), Harbin Engineering University, China Zhang, Shuai ([email protected]), Harbin Engineering University, China Guo, Qingyong ([email protected]), Harbin Engineering University, China Zhou, Peng ([email protected]), Harbin Engineering University, China 16h50 8791 | Experiments of AMS Fiber Cementitious Composite and Reinforced Concrete Beams Cho, Chang-Geun ([email protected]), Chosun University, Korea, South Feo, Luciano ([email protected]), University of Salerno, Italy Lim, Hyeon-Jin ([email protected]), Chosun University, Korea, South Moon, Hyeong-Joo ([email protected]), Chosun University, Korea, South Kim, Sang-Wan ([email protected]), Chosun University, Korea, South Kim, Hoyeon ([email protected]), Chosun University, Korea, South 17h10 7690 | Sandwich panels with thin-walled high performance concrete layers Stark, Alexander P B ([email protected]), Institute of Structural Concrete, RWTH Aachen University, Germany Shams, Ali ([email protected]), Institute of Structural Concrete, RWTH Aachen University, Germany Hegger, Josef ([email protected]), Institute of Structural Concrete, RWTH Aachen University, Germany

13

17h30 7740 | A mechanical model for predicting the stress-strain response of FRP/SMA reinforcing bars for concrete structures Mancusi, Geminiano ([email protected]), University of Salerno, Italy Orefice, Agostina ([email protected]), University of Salerno, Italy 17h50 9148 | Experimental Calibration for Tensile Strength Estimation of Circular GFRP Rebar You, Young-Jun ([email protected]), Korea Institute of Civil Engineering and Building Technology, Korea, South Park, Ki-Tae ([email protected]), Korea Institute of Civil Engineering and Building Technology, Korea, South Seo, Dong-Woo ([email protected]), Korea Institute of Civil Engineering and Building Technology, Korea, South Hwang,Ji-Hyun ([email protected]), Korea Institute of Civil Engineering and Building Technology, Korea, South 18h10 7620 | Optimization of FRP Hybrid Bar Design for Tensile and Bonding Performance Seo, Dong-Woo ([email protected]), Korea Institute of Civil Engineering and Building Technology, Korea, South Park, Ki-Tae ([email protected]), Korea Institute of Civil Engineering and Building Technology, Korea, South You, Young-Jun ([email protected]), Korea Institute of Civil Engineering and Building Technology, Korea, South Lee, Sang-Yoon ([email protected]), Korea Institute of Civil Engineering and Building Technology, Korea, South Hwang, Ji-Hyun ([email protected]), Korea Institute of Civil Engineering and Building Technology, Korea, South 18h30 9469 | Analysis of 2D-Solids with Internal Friction and Tensile Resistant Membranes Baratta Alessandro ([email protected]), University of Naples Federico II, Italy Corbi Ileana ([email protected]), University of Naples Federico II, Italy Corbi Ottavia ([email protected]), University of Naples Federico II, Italy

MONDAY 15 June Room VITUS IV

Session 12 – Functionally Graded Materials and Structures

Session 12.1 | Chairs: Carla Roque (INEGI, Portugal) 11h00 9295 | Differential evolution for optimization of functionally graded materials Roque, C.M.C. ([email protected]), INEGI, Portugal Martins, P.A.L.S. ([email protected]), INEGI, Portugal 11h20 9123 | Free vibration and buckling analysis of FG-CNT reinforced composite quadrilateral plates resting on Pasternak foundations Zhang, L.W. ([email protected]), Shanghai Ocean University, China Liew,K.M. ([email protected]), City University of Hong Kong, Hong Kong 11h40 9280 | Numerical Analysis of Functionally Graded Circular Plates with Modified Couple Stress Theory Reddy, J. N. ([email protected]), Texas A&M University, United States America Romanoff, Jani ([email protected]), Aalto University, Finland Loya, Jose Antonio ([email protected]), University Carlos III of Madrid, Spain

14

12h00 9033 | Levy-type solution for vibration and buckling analysis of functionally graded sandwich plates based on quasi-3D theory Trinh, Luan C. ([email protected]), Department of Mechanical & Construction Engineering, Faculty of Engineering and Environment, Northumbria University, United Kingdom Osofero, Adelaja I. ([email protected]), Department of Mechanical & Construction Engineering, Faculty of Engineering and Environment, Northumbria University, United Kingdom Vo, Thuc P. ([email protected]), Department of Mechanical & Construction Engineering, Faculty of Engineering and Environment, Northumbria University, United Kingdom Thai, Tai H. ([email protected]), Centre for Infrastructure Engineering and Safety, School of Civil and Environmental Engineering, The University of New South Wales, Australia 12h20 7050 | Mechanical properties of an FGM consisting of a high-alloyed CrMnNi-steel and varying Mg-PSZ content processed by asymmetric Spark Plasma Sintering Decker, Sabine ([email protected]), Institute of Materials Engineering, TU Bergakademie Freiberg, Germany Kru ̈ger, Lutz ([email protected]), Institute of Materials Engineering, TU Bergakademie Freiberg, Germany 12h40 9096 | Characteristics of thin films prepared from SEBS/PP/WAX composites as polyelectrolyte membranes for fuel cell applications Murat Sen ([email protected]), Hacettepe University, Turkey Kinyas Polat ([email protected]), Bilkent University, Turkey Session 12.2 | Chairs: Pietro Russo (Institute for Polymers, Composites and Biomaterials - National Council of Research, Italy) 14h00 7313 | Influence of interface strength gradation on mechanical properties of woven glass fabric/polypropylene laminates Russo P. ([email protected]), Institute for Polymers, Composites and Biomaterials - National Council of Research, Italy Simeoli G. ([email protected]), Dept. Chemical, Materials Engineering and Industrial Production - University Naples Federico II, Italy Iannace S. ([email protected]), Institute for Polymers, Composites and Biomaterials - National Council of Research, Italy Sorrentino L. ([email protected]), Institute for Polymers, Composites and Biomaterials - National Council of Research, Italy 14h20 7607 | The Combined Model of Heat Conduction in a Skeletonal Micro-heterogeneous Hollow Cylinder Ostrowski, Piotr ([email protected]), Lódź University of Technology, Poland 14h40 7696 | Thermoelastic phenomena in the transversally graded laminates Jędrysiak, Jarosław ([email protected]), Łódź University of Technology, Poland Pazera, Ewelina ([email protected]), Łódź University of Technology, Poland 15h00 7789 | The effect of step-wise graded density cores on the blast resistance of polymeric foam core sandwich panels. Kelly, Mark ([email protected]), Imperial College London, United Kingdom Arora, Hari ([email protected]), Imperial College London, United Kingdom Dear, John ([email protected]), Imperial College London, United Kingdom 15h20 7823 | Creep Relaxation in FGM Rotating Disc with non-Uniform Profiles hodais zharfi ([email protected]), Ferdowsi University of Mashhad, Iran hamid ekhteraei Toussi ([email protected]), Ferdowsi University of Mashhad, Iran hamid jarfi ([email protected]), Sharfi University of Technology, Iran

15

Session 12.3 | Chairs: Adele Carrado (IPCMS UMR 7504 CNRS, France) and Heinz Palkowski (TU Clausthal, Germany) 16h30 8121 | Ti/polymer/Ti sandwich systems for bio-applications Melania Reggente ([email protected]), Sapienza University of Rome , Italy Irene Bonafede ([email protected]), Sapienza University of Rome , Italy Adele Carradò ([email protected]), IPCMS UMR 7504 CNRS, France Genevieve Pourroy ([email protected]), IPCMS UMR 7504 CNRS, France Mohamed Harharsh ([email protected]), TU Clausthal, Germany Patrick Masson ([email protected]), IPCMS UMR 7504 CNRS, France Heinz Palkowski ([email protected]), TU Clausthal, Germany 16h50 8690 | Nonlocal effects in viscoelastic functionally graded Bernoulli-Euler nanobeams Barretta, R. ([email protected]), University of Naples Federico II, Italy Luciano, R. ([email protected]), University of Cassino and Southern Lazio, Italy 17h10 8556 | Analysis of forced vibrations of annular plates made of functionally graded material Wirowski, Artur ([email protected]), Lodz University of Technology, Poland Rabenda, Martyna ([email protected]), Lodz University of Technology, Poland 17h30 8557 | DYNAMIC MODELLING OF RECTANGULAR THIN PLATES WITH DENSE SYSTEM OF RIBS IN TWO DIRECTIONS Rabenda, Martyna ([email protected]), Lodz University of Technology, Poland Michalak, Bohdan ([email protected]), Lodz University of Technology, Poland 17h50 8624 | BUCKLING AND VIBRATION ANALYSIS OF FUNCTIONALLY GRADED SANDWICH BEAMS USING A ZEROTHORDER SHEAR DEFORMATION BEAM THEORY Nguyen, Kien T. ([email protected]), Ho Chi Minh City University of Technology and Education, Vietnam Vo, Thuc P. ([email protected]), Northumbria University, United Kingdom 18h10 8745 | A nonlocal higher-order beam theory with application to bending, buckling, and vibration of functionally graded nanobeams Thuc P. Vo ([email protected]), Northumbria University, UK Trung Kien Nguyen ([email protected]), University of Technical Education Ho Chi Minh City, Vietnam 18h30 8741 | Functionally graded oxide glasses with nanostructural conductive surface layers Karczewski, Jakub ([email protected]), Gdańsk University of Technology , Poland Bochentyn, Beata ([email protected]), Gdańsk University of Technology , Poland Gazda, Maria ([email protected]), Gdańsk University of Technology , Poland Kusz, Bogusław ([email protected]), Gdańsk University of Technology , Poland

16

MONDAY 15 June Room LAURUS

Session 13 – Health Monitoring Techniques in Composite Structures Session 13.1 | Chairs: Galvanetto, Ugo (Università degli studi di Padova, Italy) and Tita, Volnei (University of São Paulo, Brazil) 11h00 8929 | DELAMINATION IDENTIFICATION IN COMPOSITE MULTILAYERD STRUCTURES Stawiarski Adam ([email protected]), Institute of Machine Design, Poland Muc Aleksander ([email protected]), Institute of Machine Design, Poland 11h20 8910 | Structural Health Monitoring in composite plate using system identification Chowdhury, Md. Shakar Ullah ([email protected]), The University of New South Wales, Australia Shankar, Krishna ([email protected]), The University of New South Wales, Australia 11h40 7056 | Recent development in passive sensing for structural health monitoring applications Thiene, Marco ([email protected]), Imperial College London, United Kingdom Galvanetto, Ugo ([email protected]), Università degli studi di Padova, Italy 12h00 7664 | Flexural After Impact (FAI): A new criterion to evaluate the residual strength of composite materials De Medeiros, Ricardo ([email protected]), Department of Aeronautical Engineering, São Carlos School of Engineering - University of São Paulo, Brazil Sartorato, Murilo ([email protected]), Department of Aeronautical Engineering, São Carlos School of Engineering - University of São Paulo, Brazil Vandepitte, Dirk ([email protected]), Department of Mechanical Engineering - PMA, KU Leuven, Belgium Tita, Volnei ([email protected]), Department of Aeronautical Engineering, São Carlos School of Engineering - University of São Paulo, Brazil 12h20 7779 | Fatigue Studies in the Development of a Proof Test for Through-Life Monitoring of Bond Integrity in Aircraft Bonded Repairs Chang, P ([email protected]), DSTO, Australia Baker, A ([email protected]), DSTO, CRC-ACS, ACSA, Australia Wang, J ([email protected]), DSTO, Australia Gunnion, A ([email protected]), CRC-ACS, ACSA, Australia 12h40 8104 | Hybrid Effect of Conductive Materials on the Bending Behaviour of Concrete Beam and Self-Monitoring of Freeze-Thaw Damage Ding, Yining ([email protected]), Dalian university of technology, China Huang, Yesheng ([email protected]), Dalian university of technology, China Zhang, Yulin ([email protected]), University of Minho, Portugal Aguiar, J B ([email protected]), University of Minho, Portugal Session 13.2 | Tita, Volnei (University of São Paulo, Brazil) and Mauricio Caliri (University of São Paulo, Brazil) 14h00 8105 | Concrete with triphasic conductive materials for self-monitoring of cracking development subjected to flexure Ding, Yining ([email protected]), Dalian university of technology, China Huang, Yesheng ([email protected]), Dalian university of technology, China Zhang,Yulin ([email protected]), University of Minho, Portugal

17

14h20 8109 | Structural Health Monitoring of Stiffened Composite Panels Using the Damage Force Indicator Method Samaratunga, Dulip ([email protected]), Mississippi State University, United States America Jha, Ratneshwar ([email protected]), Mississippi State University, United States America Gopalakrishnan, S. ([email protected]), Indian Institute of Science, India 14h40 8653 | Felicity Effect and Ratio in Multilayer Composite Overlapped Pressure Vessel DAHMENE, Fethi ([email protected]), Institut de Soudure, France YAACOUBI, Slah ([email protected]), Institut de Soudure, France 15h00 8686 | Damage Detection of a Prestressed Concrete Bridge with Corrugated Steel Webs Using a Moving Vehicle Li, Zhenhu ([email protected]), Research Center, Shenzhen Municipal Engineering Design and Research Institute, China Chen, Xiachun ([email protected]), Department of Civil Engineering, The University of Hong Kong, Hong Kong Au, Francis T.K. ([email protected]), Department of Civil Engineering, The University of Hong Kong, Hong Kong Jiang, Ruijuan ([email protected]), Research Center, Shenzhen Municipal Engineering Design and Research Institute, China 15h20 8713 | Fabrication of the thermoplastic composite impact sensor usable at cryogenic environment Kun Jeong ([email protected]), Chonbuk National University, Korea, South Seong Su Kim ([email protected]), Chonbuk National University, Korea, South Session 13.3 | Chairs: Seong Su Kim (Chonbuk National University, Korea, South) and and Mauricio Caliri (University of São Paulo, Brazil) 16h30 8751 | LAMB WAVE PROPAGATION IN A DELAMINATED COMPOSITE PANEL: MODELING AND TESTING Maio,Leandro ([email protected]), Department of Industrial Engineering - Aerospace Section, Italy Memmolo, Vittorio ([email protected]), Department of Industrial Engineering - Aerospace Section, Italy Ricci, Fabrizio ([email protected]), Department of Industrial Engineering - Aerospace Section, Italy Boffa, Natalino Daniele ([email protected]), Department of Industrial Engineering - Aerospace Section, Italy Monaco, Ernesto ([email protected]), Department of Industrial Engineering - Aerospace Section, Italy Meola, Carosena ([email protected]), Department of Industrial Engineering - Aerospace Section, Italy 16h50 7771 | On the direction-dependent thermal behavior of layered structures fabricated via Fused Deposition Modeling Economidou, Sophia N. ([email protected]), University of Piraeus, Greece Kousiatza, Charoula ([email protected]), University of Piraeus, Greece Karalekas, Dimitris ([email protected]), University of Piraeus, Greece 17h10 7804 | Damage detection using artificial neural networks (ANN) and probability ellipse (PE) methods via Lamb waves approach Assunta Sorrentino ([email protected]), CIRA - Italian Aerospace Research Center, Italy Angelo De Fenza ([email protected]), University of Naples, Federico II - Dept. of Industrial Engineering - Aerospace section, Italy Pasquale Vitiello ([email protected]), CIRA - Italian Aerospace Research Center, Italy 17h30 8683 | Exploring the limits of the mode shape derivatives to localize damage in laminated composite plates Moreno-García, P. ([email protected]), Escuela Superior de Ingeniería. Universidad de Sevilla, Spain Araújo dos Santos, J. V. ([email protected]), LAETA, IDMEC, Portugal Lopes, H. ([email protected]), DEM, ISEP, Instituto Politécnico do Porto, Portugal 17h50 8919 | Effect of Water Absorption and Sorptivity on the Durability of CNTs modified mortars Alafogianni, P. ([email protected]), Department of Materials Science and Engineering, University of Ioannina, Greece Matikas, T.E. ([email protected]), Department of Materials Science and Engineering, University of Ioannina, Greece Barkoula, N.-M. ([email protected]), Department of Materials Science and Engineering, University of Ioannina, Greece

18

18h10 8211 | VARIABLE-STIFFNESS COMPOSITE PANELS: Effects of manufacturing on laminate properties Falcó, O. ([email protected]), IMDEA Materials Institute, Spain Lopes, C. S. ([email protected]), IMDEA Materials Institute, Spain Mayugo, J. A. ([email protected]), AMADE, Polytechnic School, Universitat de Girona, Spain Maimí, P. ([email protected]), AMADE, Polytechnic School, Universitat de Girona, Spain

MONDAY 15 June Room QUERCUS

Session 14 – Impact on Composite Structures

Session 14.1 | Chairs: Coghe, Frederik (Royal Military Academy, Belgium) 11h00 9303 | SOFT IMPACT RESPONSE OF LAMINATED GLASS PLATES USING FINITE ELEMENT ANALYSIS Zhou, Jie ([email protected]), Imperial College London, United Kingdom Mohagheghian, Iman ([email protected]), Imperial College London, United Kingdom Wang, Yi ([email protected]), Imperial College London, United Kingdom Xintao, Guo ([email protected]), Beijing Institute of Aeronautical Materials, Beijing, China Dear, John P ([email protected]), Imperial College London, United Kingdom Charalambides, Maria ([email protected]), Imperial College London, United Kingdom 11h20 9334 | Assessment of Damage Tolerance in Composite Sandwich Structures with Cork Film Interleaves Faria, Luís M. M. G. ([email protected]), FEUP, Portugal Moreira, Pedro G. M. O. ([email protected]), FEUP, Portugal Nóvoa, Paulo J. R. O. ([email protected]), FEUP, Portugal Marques, António T. ([email protected]), FEUP, Portugal 11h40 9219 | Composite Structural Characteristics Based Progressive Damage Response in Hypervelocity Horton, Brandon ([email protected]), Virginia Tech, United States America Bayandor, Javid ([email protected]), Virginia Tech, United States America 12h00 9067 | Theoretical foundations of splats formation at impact of decamicron-sized porous composite particles ''liquid binder – solid ultra-fine inclusions'' onto substrate Solonenko, Oleg ([email protected]), Khristianovich Institute of Theoretical and Applied Mechanics, SB RAS, Novosibirsk, Russian Federation 12h20 8887 | Impact damage observations of CFRP composite laminates by using X-ray Computed Tomography Suzuki, Kohji ([email protected]), Chiba Institute of Technology, Japan Session 14.2 | Chairs: Coghe, Frederik (Royal Military Academy, Belgium) 14h00 7858 | Behind-armour blunt trauma: matching measurement to injury using finite element modeling Coghe, Frederik ([email protected]), Royal Military Academy, Belgium Gilson, Lionel ([email protected]), Royal Military Academy, Belgium Miranda, Angel ([email protected]), Royal Military Academy, Belgium Azevedo, Ana ([email protected]), Royal Military Academy, Belgium Rabet, Luc ([email protected]), Royal Military Academy, Belgium Pirlot, Marc ([email protected]), Royal Military Academy, Belgium

19

14h20 7104 | Experimental and numerical study of oblique impact on helicopter blades Pascal, Pascal ([email protected]), Institut Clément Ader - Toulouse, France Navarro, Pablo ([email protected]), Institut Clément Ader- Toulouse, France Marguet, steven ([email protected]), Institut Clément Ader- Toulouse, France Casari, Pascal ([email protected]), GEM Nantes, France Ferrero, Jean Francois ([email protected]), Institut Clément Ader- Toulouse, France Tawk, Issam ([email protected]), Universite de Balamand, Lebanon 14h40 7777 | Finite element analysis of the effect of shape impactors on the impact behavior of circular notched composite material at low velocity impact Djilali Beida Maamar ([email protected]), University of Mostaganem, Algeria R.Zenasni ([email protected]), University of Mostaganem, Algeria Jaime Vina Olay ([email protected]), University of Oviedo, Campus de Viesques, 33204 Gijon, Spain Antonio Arguelles amado ([email protected]), University of Oviedo, Campus de Viesques, 33204 Gijon, Spain 15h00 7848 | Modification of selected mechanical properties of ablative composites by a selection of components Przybyłek, Paweł ([email protected]), Polish Air Force Academy, Department of Airframe and Engine, Poland Kucharczyk, Wojciech ([email protected]), Kazimierz Pulaski University of Technology and Humanities in Radom, Faculty of Mechanical Engineering, Poland Opara, Tadeusz A. ([email protected]), Kazimierz Pulaski University of Technology and Humanities in Radom, Faculty of Mechanical Engineering, Poland Komorek, Andrzej ([email protected]), Polish Air Force Academy, Department of Avionics and Control Systems, Poland 15h20 7857 | Impact Mechanical Behaviour of Graphite Fiber Reinforced Peek García-González, D. ([email protected]), Carlos III University of Madrid, Spain Rusinek, A. ([email protected]), National Engineering School of Metz, France Jankowiak, T. ([email protected]), Poznan University of Technology, Poland Arias, A. ([email protected]), Carlos III University of Madrid, Spain 15h40 8230 | An Advanced Multi-scale Model for Composite Impact Jian Xu ([email protected]), Imdea Materials, Spain Sandip Haldar ([email protected]), Imdea Materials, Spain Claudio Lopes ([email protected]), Imdea Material, Spain Carlos González ([email protected]), Imdea Material, Spain Session 14.3 | Chairs: Azevedo, Ana ([email protected]), Royal Military Academy, Belgium 16h30 7913 | Numerical modelling of small calibre impact on Dyneema HB80 composite material Azevedo, Ana ([email protected]), Department of Weapon Systems and Ballistics, Royal Military Academy, Renaissance Avenue, 30, B-1000 Brussels, Belgium, Belgium Miranda-Vicario, Angel ([email protected]), Department of Weapon Systems and Ballistics, Royal Military Academy, Renaissance Avenue, 30, B-1000 Brussels, Belgium, Belgium Coghe, Frederik ([email protected]), Department of Weapon Systems and Ballistics, Royal Military Academy, Renaissance Avenue, 30, B-1000 Brussels, Belgium, Belgium Teixeira-Dias, Filipe M. H. V. ([email protected]), Institute for Infrastructure and Environment, School of Engineering, The University of Edinburgh, The King’s Buildings, Edinburgh EH9 3JL, UK, United Kingdom 16h50 7931 | Simulation of delaminations induced by low velocity impacts in composites: a sensitivity study to guide an effective use of cohesive elements Panettieri, Enrico ([email protected]), University of Pisa, Italy Fanteria, Daniele ([email protected]), University of Pisa, Italy Danzi, Federico ([email protected]), University of Pisa, Italy

20

17h10 7984 | Analysis of obliquity in the high velocity impact of carbon/epoxy fragments Mata Díaz, Alberto ([email protected]), Universidad Carlos III de Madrid, Spain Artero Guerrero, José Alfonso ([email protected]), Universidad Carlos III de Madrid, Spain Pernas Sánchez, Jesús ([email protected]), Universidad Carlos III de Madrid, Spain Varas Doval, David ([email protected]), Universidad Carlos III de Madrid, Spain López-Puente, Jorge ([email protected]), Universidad Carlos III de Madrid, Spain 17h30 7989 | Analysis of the effect of high velocity impact of ice spheres upon the static and dynamic response of carbon/epoxy laminates M. A. Pérez ([email protected]), Universitat Politècnica de Catalunya, Spain, J. Pernas-Sánchez ([email protected]), University Carlos III of Madrid, Spain J.A. Artero-Guerrero ([email protected]), University Carlos III of Madrid, Spain R. Serra-López ([email protected]), LITEM, Spain J. López-Puente ([email protected]), University Carlos III of Madrid, Spain Ll. Gil ([email protected]), Universitat Politècnica de Catalunya , Spain 17h50 8046 | Numerical study of carbon/epoxy woven laminates submitted to equienergetic impacts Pernas-Sánchez, Jesús ([email protected]), Universidad Carlos III de Madrid, Spain Arrtero-Guerrero, Jose A. ([email protected]), Universidad Carlos III de Madrid, Spain López-Puente, Jorge ([email protected]), Universidad Carlos III de Madrid, Spain Varas, David ([email protected]), Universidad Carlos III de Madrid, Spain 18h10 8302 | Mechanical response of composite laminates at high strain rates: Effect of hostile solutions Dias, B. S. M. ([email protected]), University of Coimbra, Portugal Amaro, A. M. ([email protected]), University of Coimbra, Portugal Cirne. J. S. ([email protected]), University of Coimbra, Portugal Reis, P. N. B. ([email protected]), University of Beira Interior, Portugal Neto, M. A. ([email protected]), University of Coimbra, Portugal 18h30 9115 | The impact performances of GLARE laminates Chen, Qi ([email protected]), School of Aeronautic Science and Engineering, Beihang University, China Guan, Zhidong ([email protected]), School of Aeronautic Science and Engineering, Beihang University, China Zhuo, Yue ([email protected]), School of Aeronautic Science and Engineering, Beihang University, China 18h50 8698 | Tribological properties of polymer-ceramic composites under dry sliding and artificial saliva lubrication Madej, Monika ([email protected]), Kielce University of Technology, Poland Ozimina, Dariusz ([email protected]), Kielce University of Technology, Poland Baranowicz, Paweł ([email protected]), NZOZ EKSTRADENT, Poland Wysokińska-Miszczuk, Joanna ([email protected]), Medical University of Lublin, Poland

21

MONDAY 15 June Room OLIVA

Session 15 – Joints in Composite Structures Session 15.1 | Chairs: Konstantinos Tserpes (University of Patras, Greece) and Pearce, Garth M. (UNSW Australia, Australia) 11h00 8974 | Seismic performance of RC engineered cementitious composite (ECC) exterior beam-column joints under reversed cyclic loading. Said, Shwan H. ([email protected]), University of Malaya, Malaysia Abdul Razak, Hashim ([email protected]), University of Malaya, Malaysia 11h20 9093 | Cyclic behaviour of an all pultruded FRP beam-column joint Boscato, Giosue ([email protected]), IUAV University of Venice, Italy Francesca, Feroldi ([email protected]), IUAV University of Venice, Italy Russo, Salvatore ([email protected]), IUAV University of Venice, Italy 11h40 8948 | Investigation of the transition zone for locally metal reinforced joining areas Enno Petersen ([email protected]), German Aerospace Center (DLR), Germany 12h00 8925 | Numerical simulation of the mechanical performance of composite bonded joints containing X-bolt crack stoppers Ioannis Floros ([email protected]), University of Patras, Greece Konstantinos Tserpes ([email protected]), University of Patras, Greece 12h20 8871 | Effect of shimming on bearing response of composite-aluminium joints with countersunk bolt Zhai Yunong ([email protected]), School of Mechanical Engineering & Automation, BeiHang University, China Li Dongsheng ([email protected]), School of Mechanical Engineering & Automation, BeiHang University, China Li Xiaoqiang ([email protected]), School of Mechanical Engineering & Automation, BeiHang University, China Wang Liang ([email protected]), School of Mechanical Engineering & Automation, BeiHang University, China Yin Yu ([email protected]), School of Mechanical Engineering & Automation, BeiHang University, China 12h40 7139 | Damage behavior of pin loaded CFRP at elevated temperatures Julia Wagner ([email protected]), BMW Group, Germany Session 15.2 | Chairs: Konstantinos Tserpes (University of Patras, Greece) and Pearce, Garth M. (UNSW Australia, Australia) 14h00 7531 | DAMAGE ANALYSIS OF COMPOSITE-ALUMINIUM ADHESIVELY-BONDED SINGLE-LAP JOINTS Ribeiro, Tiago E.A. ([email protected]), ISEP, Portugal Campilho, Raul D.S.G. ([email protected]), ISEP, Portugal Carbas, Ricardo J.C. ([email protected]), FEUP, Portugal da Silva, Lucas L.M. ([email protected]), FEUP, Portugal Goglio, Luca ([email protected]), Politecnico di Torino, Italy 14h20 7793 | The effect of titanium bush repairs on the static strength of CFRP coupons and joints Falconieri, Diletta; Starikov, Roman; Franco, Francesco. ([email protected]), Federico II University, Naples, Italy

22

14h40 7827 | Comparison of Static and Fatigue Characteristics of Hybrid and Standard Joints for Thick Composite Structures Chowdhury, Nabil M. ([email protected]), Monash University, Australia Chiu, Wing Kong ([email protected]), Monash University, Australia Wang, John ([email protected]), Defence Science and Technology Organisation, Australia Chang, Paul ([email protected]), Defence Science and Technology Organisation, Australia 15h00 7884 | Meshless Analysis of Stresses in a Single Lap Bonded-Bolted Composite Joint Bodjona, Kobye ([email protected]), McGill University, Canada Lessard, Larry B. ([email protected]), McGill University, Canada 15h20 7980 | Analysis of Bolted and Bonded Composite Joint using Experimentally Determined Flexible Adhesive Properties Lim, Gyu-hyeong ([email protected]), McGill University, Canada Bodjona, Kobye ([email protected]), McGill University, Canada Raju, Karthik Prasanna ([email protected]), McGill University, Canada Campagne, Denis ([email protected]) INSA Lyon, France Lessard, Larry B. ([email protected]), McGill University, Canada 15h40 7932 | The Behavior of Reinforced Concrete Slab-Column Connection Reinforced with Headed Shear Studs Arranged in Orthogonal and Radial Layouts Dam, Thai X. ([email protected]), University of Michigan, United States America Wight, James K. ([email protected]), University of Michigan, United States America Session 15.3 | Chairs: Konstantinos Tserpes (University of Patras, Greece) and Pearce, Garth M. (UNSW Australia, Australia) 16h30 7981 | Numerical analysis of modified CFRP laminate in bearing conditions Szymczyk Elzbieta ([email protected]), Military University of Technology, Poland Puchala Krzysztof ([email protected]), Military University of Technology, Poland Jachimowicz Jerzy ([email protected]), Military University of Technology, Poland 16h50 7985 | Damage sizing of thermoplastic bolted joints on composite materials Hamonou, Romain ([email protected]), Ecole Centrale Nantes, France Gornet, Laurent ([email protected]), Ecole Centrale Nantes, France Jacquemin, Frédéric ([email protected]), Université de Nantes, France Auger, Stéphane ([email protected]), CETIM, France 17h10 8029 | Bearing Failure Prediction for Hybrid Bolted-Bonded Composite Joints using Onset Theory Pearce, Garth M. ([email protected]), UNSW Australia, Australia 17h30 8037 | Design and implementation of an ARCAN-style test rig for off-axis testing of bolted joints in composite laminates Pearce, Garth M. ([email protected]), UNSW Australia, Australia Gould, Coel ([email protected]), UNSW Australia, Australia 17h50 8053 | Numerical investigation on the effect of bolt-hole position alignment errors on strength of bearing-type multi-row bolted connections for FRP composite structures Kader, M.A. ([email protected]), Nagoya University, Bangladesh Kitane, Y. ([email protected]), Nagoya University, Japan Itoh, Y. ([email protected]), Nagoya University, Japan

23

18h10 8102 | Numerical design of a dismountable spar for a light airplane in carbon fiber reinforced plastic Clément, Fleuret ([email protected]), CRITT Matériaux Poitou-Charentes, France Anne-Sophie, Andreani ([email protected]), CRITT Matériaux Poitou-Charentes, France Sylvain, L''Héritier ([email protected]), CRITT Matériaux Poitou-Charentes, France Jean-Marie, Buignet ([email protected]), C3 Technologies, France Eric, Lainé ([email protected]), Institut Pprime – CNRS • ENSMA • Université de Poitiers • UPR 3346, France Anne-Laure, Gorge ([email protected]), Institut Pprime – CNRS • ENSMA • Université de Poitiers • UPR 3346, France Jean-Claude, Grandidier ([email protected]), Institut Pprime – CNRS • ENSMA • Université de Poitiers • UPR 3346, France 18h30 9118 | Analyzing the modal behavior of adhesive bonded thermoplastic honeycomb sandwich panels to estimate the elastic properties of the joint Stijn Debruyne ([email protected]), KU Leuven, Belgium Dirk Vandepitte ([email protected]), KU Leuven, Belgium Korneel Vanmassenhove ([email protected]), KU Leuven, Belgium 18h50 7497 | FAILURE MODE AND ANALYSIS OF BONDED/BOLTED JOINTS BETWEEN HFRP AND ALUMINIUM Yogesh,T,L ([email protected]), Chalmers University of Technology, Sweden Arunkumar,N ([email protected]), St. Joseph''s College of Engineering, India 19h10 7960 | Influence of substrates’ fibers orientations on the behavior of composite substrates double lap bonded assemblies under impact shear loads (15. Joints in Composite Structures) Hazimeh, Rachad ([email protected]), LUNAM Université, Ecole Centrale de Nantes, Institut de Recherche en Génie Civil et Mécanique, UMR CNRS 6183, France Challita, Georges ([email protected]), Equipe MMC, Université Libanaise, Faculté de génie, Lebanon Khalil, Khaled ([email protected]), Equipe MMC, Université Libanaise, Faculté de génie, Lebanon Othman, Ramzi ([email protected]), Mechanical Engineering Department, Faculty of Engineering, King Abdulaziz University, Saudi Arabia

MONDAY 15 June Room CASTANEA

Session 19 – Nano-Composites Session 19.1 | Chairs: Crainic, N. (Politehnica University of Timisoara, Romania) and Marques, António T. (FEUP, Portugal) 11h00 9022 | Bioinspired 3D Nanotube Composite Surfaces for Implant Applications Shokuhfar ([email protected]), Michigan Technological University, United States America 11h20 9113 | Outstanding composites of the photovoltaic perovskite and carbon nanostructures Forró, László ([email protected]), Ecole Polytechnique Fédérale de Lausanne, Switzerland

24

11h40 9057 | Structure and optical properties of thin poly(p-xylylene) - silver nanocomposite films prepared by lowtemperature vapor deposition polymerization Streltsov, Dmitry R. ([email protected]), Enikolopov Institute of Synthetic Polymer Materials, Russian Academy of Sciences, Russian Federation Mailyan, Karen A. ([email protected]), Institute for Theoretical and Applied Electromagnetics, Russian Academy of Sciences , Russian Federation Gusev, Alexey V. ([email protected]), Institute for Theoretical and Applied Electromagnetics, Russian Academy of Sciences, Russian Federation Pebalk, Andrey V. ([email protected]), Karpov Institute of Physical Chemistry, Russian Federation Odarchenko, Yaroslav I. ([email protected]), Institut de Science des Matériaux de Mulhouse (IS2M), France Ivanov, Dimitri A. ([email protected]), Institut de Science des Matériaux de Mulhouse (IS2M), France Chvalun, Sergei N. ([email protected]), National Research Centre “Kurchatov Institute”, Russian Federation 12h00 9047 | Bridging nano- to macro-mechanical properties of an aerospace-grade mono-component epoxy reinforced with carbon nanotubes Laurenzi, S. ([email protected]), Sapienza University of Rome, Italy Santonicola, M. G. ([email protected]), Sapienza University of Rome, Italy Simone, A. ([email protected]), ThalesAlenia Space Italy, Italy Materazzi, S. ([email protected]), Sapienza University of Rome, Italy 12h20 9032 | Nanoscale wrinkling of graphene on substrates with asperities Yuli Chen ([email protected]), Beihang University, China Yanguang Zhou ([email protected]), RWTH Aachen University, Germany 12h40 8997 | Carbon nanotube coated glass fiber using ionic interaction and their thermoplastic composites Jung, Byung Mun ([email protected]), Korea Institute of Materials Science, Korea, South Yoon, Soon Ho ([email protected]), Korea Institute of Materials Science, Korea, South Jang, Hongkyu ([email protected]), Korea Institute of Materials Science, Korea, South Kim, Kyung Duk ([email protected]), Korea Institute of Materials Science, Korea, South Session 19.2 | Chairs: Crainic, N. (Politehnica University of Timisoara, Romania) and Marques, António T. (FEUP, Portugal) 14h00 8906 | Organic semiconducting/ferroelectric blend memristors fabricated by temperature controlled spin coating Hu, Jinghang ([email protected]), Fudan University, China Zhu, Guodong ([email protected]), Fudan University, China 14h20 8947 | Pt dispersion and structure of alumina-platinum composites obtained by thermal oxidation of Al-Pt thin layers. Kazimierz Reszka ([email protected]), Institute of Mechatronics, Nanotechnology and Vacuum Technique,Koszalin University of Technology, Poland Jerzy Morgiel ([email protected]), Institute of Metallurgy and Materials Science, Polish Academy of Science, Kraków, Poland Mieczyslaw Szczypinski ([email protected]), TERMEX Ltd., Poland 14h40 8833 | Properties and Structure of Sintered Materials with Borides (Metal Matrix Composite) Karwan-Baczewska, Joanna ([email protected]), AGH University of Science and Technology, Poland 15h00 5837 | Photocatalytic Activities and Structural Formation of Au-Pd Nano Alloys Embedded into Amphiphilic Graft Copolymer Hazer B ([email protected]), Bu ̈lent Ecevit University, Turkey Kalaycı OA ([email protected]), Bu ̈lent Ecevit University, Turkey

25

15h20 6974 | Mechanical Behavior of Three-dimensional Graphene Foam and its Polymer-filled Composites Samda, Yarjan ([email protected]), Khalifa University, United Arab Emirates Li, Yuanqing ([email protected]), Khalifa University, United Arab Emirates Schiffer, Andreas ([email protected]), Khalifa University, United Arab Emirates Liao, Kin ([email protected]), Khalifa University, United Arab Emirates Session 19.3 | Chairs: Crainic, N. (Politehnica University of Timisoara, Romania) 16h30 7520 | Preparation and characterization of DNA/allophane composite hydrogels Masami Okamoto ([email protected]), Toyota Technological Institute, Japan Yoko Matsuura ([email protected]), Toyota Technological Institute, Japan Takuya Kawachi ([email protected]), Toyota Technological Institute, Japan 16h50 7555 | Radar absorbing structures composed of the nano-composites dispersed with the carbon black and the carbon nanotube Choi, Ilbeom ([email protected]), KAIST, Korea, South Lee, Dongyoung ([email protected]), KAIST, Korea, South Lee, Dai Gil ([email protected]), KAIST, Korea, South 17h10 7586 | Development and characterization of biocompatible magnetic nanoparticles based on magnetite (Fe3O4) and ferrite (Fe2O4) and its application in the treatment by hyperthermia Diaz-Bleis, Dianela ([email protected]), CINVESTAV, Mexico Freile-Pelegrin, Yolanda ([email protected]), CINVESTAV, Mexico Alvarado-Gill, Juan J. ([email protected]), CINVESTAV, Mexico 17h30 7720 | Interfacial Phenomena in Structural Polymeric Nano-clay Synthetic fibre-reinforced Cementitious Composites Lee, Su-Jin ([email protected]), Konkuk University, Korea, South Won, Jong-Pil ([email protected]), Konkuk University, Korea, South 17h50 7889 | Microfibrillar composites of PCL matrix and layered silicates Kelnar, Ivan ([email protected]), Institute of Macromolecular Chemistry ASCR, v.v.i., Czech Republic Kratochvíl, Jaroslav ([email protected]), Institute of Macromolecular Chemistry ASCR, v.v.i., Czech Republic 18h10 9348 | Fabrication and Characterization of Functionalized Silica-Epoxy Based Composite Jaewoo Nam ([email protected]), Changwon National University, Korea, South Dong Sik Bae ([email protected]), Changwon National University, Korea, South 18h30 9349 | Fabrication and Characterization of Glass fiber-Epoxy Based Composite Jong Ju Jo ([email protected]), Changwon National University, Korea, South Dong Sik Bae ([email protected]), Changwon National University, Korea, South 18h50 8996 | Localized surface plasmon resonance for Quantum Dot-gold nanoparticle hybrid Qianqian, Huang/Dr ([email protected]), School of Electronic Science and Engineering, Southeast University, Nanjing, China, China Jing, Chen/Dr ([email protected]), School of Electronic Science and Engineering, Southeast University, Nanjing, China, China Jian, Zhao/Mr ([email protected]), School of Electronic Science and Engineering, Southeast University, Nanjing, China, China Jiangyong, Pan/Dr ([email protected]), School of Electronic Science and Engineering, Southeast University, Nanjing, China, China Wei, Lei/Prof ([email protected]), School of Electronic Science and Engineering, Southeast University, Nanjing, China, China

26

MONDAY 15 June Room NUX

Session 37 – Symposium on Mechanics of Composite Materials and FGM structures, celebrating the 70th Anniversary of Professor J. N. Reddy

Session 37.1 | Chairs: Cristovao M. Soares (IST, Portugal) and Araujo (Instituto Superior Técnico, University of Lisbon, Portugal) 11h00 6758 | Non-Local Beam Theory for Micro- and Macro-Structural Responses Romanoff, J. ([email protected]), Aalto University, Finland 11h20 9003 | Size effect on the free vibration of geometrically nonlinear functionally graded micro-beams under electrical actuation and temperature change Jia X. L. ([email protected]), China University of Petroleum-Beijing, China Feng C. B. ([email protected]), China University of Petroleum-Beijing, China Ke L. L. ([email protected]), Beijing Jiaotong University, China Yang J. ([email protected]), RMIT University, Australia Kitipornchai S. ([email protected]), The University of Queensland, Australia 11h40 6805 | Dynamic prediction fatigue life of composite wind turbine blade Samir, Lecheb ([email protected]), University of Boumerdes, Algeria Abdelkader, Nour ([email protected]), University of Boumerdes, Algeria Ahmed, Chellil ([email protected]), University of Boumerdes, Algeria Hamza, Mechakra ([email protected]), University of Boumerdes, Algeria Hichem, Ghanem ([email protected]), University of Boumerdes, Algeria Hocine, Kebir ([email protected]), University of Compiene, France 12h00 6840 | A FINITE ELEMENT FOR LAMINATED GLASS PLATES WITHIN THE FIRST ORDER SHEAR DEFORMATION THEORY Altenbach, Holm ([email protected]), Otto von Guericke University Magdeburg, Institute of Mechanics, Germany Eisenträger, Johanna ([email protected]), Otto von Guericke University Magdeburg, Institute of Mechanics, Germany Naumenko, Konstantin ([email protected]), Otto von Guericke University Magdeburg, Institute of Mechanics, Germany Eremeyev, Victor A. ([email protected]), Otto von Guericke University Magdeburg, Institute of Mechanics, Germany 12h20 6899 | Vibration Analysis of Laminated Thick Plates by an Improved Hierarchical Finite Element Method Using Reddy’s Third-order Shear Deformation Theory Bo Liu ([email protected]), The Solid Mechanics Research Centre, Beihang University (BUAA), China, China Yufeng Xing ([email protected]), The Solid Mechanics Research Centre, Beihang University (BUAA), China, China 12h40 7529 | Gradual degradation in two-phase polycrystalline ceramics due to time dependent thermal loading Sadowski, Tomasz ([email protected]), Lublin University of Technology, Poland Golewski, Przemyslaw ([email protected]), Lublin University of Technology, Poland

27

Session 37.2 | Chairs: Cristovao M. Soares (IST, Portugal) and Araujo (Instituto Superior Técnico, University of Lisbon, Portugal) 14h00 7544 | Computational Modeling of Female Pelvic System To Understand The Mechanics of Pelvic Organ Prolapse Chanda, Arnab ([email protected]), University of Alabama, Tuscaloosa, United States America Unnikrishnan, Vinu ([email protected]), University of Alabama, Tuscaloosa, United States America Roy, Samit ([email protected]), University of Alabama, Tuscaloosa, United States America 14h20 7564 | ADVANCED APPLICATIONS FOR LAMINATED DOUBLY CURVED SHELLS WITH VARIABLE CURVATURES Tornabene, F. ([email protected]), University of Bologna, Italy Fantuzzi, N. ([email protected]), University of Bologna, Italy Bacciocchi, M. ([email protected]), University of Bologna, Italy Viola, E. ([email protected]), University of Bologna, Italy 14h40 7613 | Structural Essentials for Modular Hybrid Wind Turbine Blades Ochoa, Ozden O. ([email protected]), Texas A&M University, United States America Nanami, Norimichi ([email protected]), Nihon University, Japan 15h00 7934 | Electro-Mechanical Analysis of a Layered Hollow Sphere with Functionally Graded Piezoelectric Material Sburlati R. ([email protected]), University of Genova, Italy, Italy Atashipour S.A. ([email protected]), University of Genova, Italy, Italy 15h20 8143 | Static, vibration and buckling of composite beams using a quasi-3D theory Thuc P. Vo ([email protected]), Faculty of Engineering and Environment, Northumbria University, Newcastle upon Tyne, NE1 8ST, UK, United Kingdom Domagoj Lanc ([email protected]), Department of Engineering Mechanics, Faculty of Engineering, University of Rijeka, Vukovarska 58, HR-51000 Rijeka, Croatia, Croatia 15h40 9488 | On micromechanics-based nonlocal modeling of elastic matrices containing multi-layer particles Monetto, Ilaria ([email protected]), University of Genoa, Italy Berrino, Giulia ([email protected]), University of Genoa, Italy Session 37.3 | Chairs: Samit Roy, USA 16h30 8188 | Exact vibration solutions of refined theories of variable order for laminated and FGM plates and shells Dozio, L. ([email protected]), Politecnico di Milano, Italy 16h50 8189 | GEOMETRICALLY NONLINEAR ANALYSIS OF SOFT CORE SANDWICH - STRUCTURES Moita, J. ([email protected]), LAETA, IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Portugal Araujo, A. ([email protected]), LAETA, IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Portugal Soares, Cristóvão ([email protected]), LAETA, IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Portugal Soares, Carlos ([email protected]), LAETA, IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Portugal Herskovits, J. ([email protected]), COPPE-UFRJ, Universidade Federal do Rio de Janeiro, Brazil 17h10 8201 | DYNAMIC ANALYSIS OF SOFT CORE SANDWICH STRUCTURES USING KRIGING MODELS Loja, M.A.R. ([email protected]), ISEL, IDMEC, Portugal Barbosa, J.I. ([email protected]), ISEL, IDMEC, Portugal Mota Soares, C.M. ([email protected]), IDMEC, Portugal

28

17h30 6918 | Some fundamental problems of multiscale asymptotic expansion method Xing, Yufeng ([email protected]), Beihang University, China Chen, Lei ([email protected]), Beihang University, China 17h50 8594 | CREEP DEFORMATION AND FRACTURE PROCESSES IN MAGNESIUM METAL MATRIX COMPOSITES Sklenicka, Vaclav ([email protected]), Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Czech Republic Kucharova, Kveta ([email protected]), Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Czech Republic Svoboda, Milan ([email protected]), Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Czech Republic Kvapilova, Marie ([email protected]), Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Czech Republic 18h10 9387 | Effect of an inhomogeneous interphase zone on the bulk modulus of a particulate composite containing spherical inclusions Sburlati, R. ([email protected]), University of Genoa, Italy Monetto, I. ([email protected]), University of Genoa, Italy 18h30 9367 | On Damage Mechanics of 3D Orthogonal Woven Composites: Experiment and Numerical Modelling Saleh, Mohamed Nasr ([email protected]), University of Manchester (UoM), United Kingdom Lubineau, Gilles ([email protected]), King Abdullah University of Science and Technology (KAUST), Saudi Arabia Soutis, Constantinos ([email protected]), University of Manchester (UoM), United Kingdom

TUESDAY 16 June Room MORUS IV

Session 2.4 | Chairs: Nicholas Fantuzzi (University of Bologna, Italy) and Michele Bacciocchi (University of Bologna, Italy) 11h00 7659 | Natural vibrations of thin microstructured FG plates Jedrysiak, Jaroslaw ([email protected]), Lodz University of Technology, Poland 11h20 8757 | Effect of Boundary Conditions on Nonlinear Vibrations of Variable Stiffness Composite Plates Jansen, Eelco ([email protected]), Leibniz Universität Hannover, Institute of Structural Analysis, Germany Ribeiro, Pedro ([email protected]), Universidade do Porto, DEMec, Faculdade de Engenharia, Portugal Rahman, Tanvir ([email protected]), TNO DIANA BV, Netherlands Rolfes, Raimund ([email protected]), Leibniz Universität Hannover, Institute of Structural Analysis, Germany 11h40 7575 | Preliminary theoretical study on shear lag effect of the PC box girder bridge with a constant depth and corrugated steel webs Xiao,Yu Feng ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China Jiang,Rui Juan ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China Wu, Qi Ming ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China 12h00 7597 | The transient responses analysis of ply-dropped laminated composite beams by a developed reverberation–ray matrix method Miao, Fuxing ([email protected]), Ningbo University, China Sun, Guojun ([email protected]), Shanghai Jiaotong University, China

29

12h20 7656 | Geometrically nonlinear vibrations of slender meso-periodic beams Domagalski, Lukasz ([email protected]), Lodz University of Technology, Poland Jedrysiak, Jaroslaw ([email protected]), Lodz University of Technology, Poland 12h40 9503 | Meshless natural neighbor Galerkin method for nonlinear analysis of composite laminates Preethi Kasirajan ([email protected]), IIT Hyderabad, India Amirtham Rajagopal ([email protected]), IIT Hyderabad, India Session 2.5 | Chairs: Nicholas Fantuzzi (University of Bologna, Italy) and Michele Bacciocchi (University of Bologna, Italy) 14h00 7701 | Deflection and strength of a five layer sandwich beam – a nonlinear hypothesis Smyczynski, Mikolaj J ([email protected]), Pozan University of Technology, Poland Magnucka-Blandzi, E ([email protected]), Pozan University of Technology, Poland 14h20 7921 | Morphing structures: A refined, computationally-efficient solution for von Kármán shells Lamacchia, Ettore ([email protected]), University of Bristol, United Kingdom Pirrera, Alberto ([email protected]), University of Bristol, United Kingdom Weaver, Paul M. ([email protected]), University of Bristol, United Kingdom 14h40 7968 | Analysis of a Orthotropic Cylindrical Cantilever Beam under Transverse Loading Hamidreza Yazdani Sarvestani ([email protected]), Concordia University, Canada Suong Van Hoa ([email protected]), Concordia University, Canada Mehdi Hojjati ([email protected]), Concordia University, Canada 15h00 8850 | Three-dimensional Elastic Static Analysis of Sandwich Composite Plate Considered Imbue Layer Effects Huo, Ruili ([email protected]), College of Civil Engineering, Nanjing Tech University, China Zhou, Ding ([email protected]), College of Civil Engineering, Nanjing Tech University, China Liu, Weiqing ([email protected]), College of Civil Engineering, Nanjing Tech University, China Wang, Lu ([email protected]), College of Civil Engineering, Nanjing Tech University, China Zhao, Kai ([email protected]), College of Civil Engineering, Nanjing Tech University, China 15h20 8045 | Experimental and numerical study on temperature dependent anisotropic visco-elastic properties of the printed circuit board (PCB) patterns Joo, Sung-Jun ([email protected]), Hanyang University, Korea, South Park, Buhm ([email protected]), Hanyang University, Korea, South Nam, Gwon-Woo ([email protected]), Hanyang University, Korea, South Kim, Do-Hyoung ([email protected]), Hanyang University, Korea, South Kwak, Dong-Ok ([email protected]), Samsung Electronics, Korea, South Park, Junhong ([email protected]), Hanyang University, Korea, South Kim, Hak-Sung ([email protected]), Hanyang University, Korea, South 15h40 8095 | Local web-buckling of shear-deformable laminated composite beams under shear and uniaxial compressive loads using discrete plate analysis Torsten Kuehn, Hartmut Pasternak and Christian Mittelstedt ([email protected]), Elbe Flugzeugwerke GmbH, Germany

30

Session 2.6 | Chairs: Nicholas Fantuzzi (University of Bologna, Italy) and Michele Bacciocchi (University of Bologna, Italy) 16h30 8171 | FE analysis of CFRP-strengthened timber finger-joint Khelifa M. ([email protected]), University of Lorraine, France Rogaume Y. ([email protected]), University of Lorraine, France 16h50 8641 | the effective flange width calculation for box girder bridges with varying flange thickness Wu, Qi-Ming ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China Jiang, Rui-Juan ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China Gai, Wei-Ming ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China Yi, Xiao-Wei ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China Xiao, Yu-Feng ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China 17h10 8649 | A BEAM ELEMENT FOR PC BOX-GIRDER BRIDGES WITH CORRUGATED STEEL WEBS Jiang, Rui-Juan ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China Wu, Qi-Ming ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China Gai, Wei-Ming ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China Li, Zhen-Hu ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China Yi, Xiao-Wei ([email protected]), Shenzhen Municipal Engineering Design & Research Institute, China 17h30 8613 | The effect of defects on the crashing characteristics of CFRP square tubes Qiang Liu ([email protected]), School of Engineering, Sun Yat-Sen University, Guangzhou City 510006, China, China Zhengyan Ou ([email protected]), School of Engineering, Sun Yat-Sen University, Guangzhou City 510006, China, China 17h50 8794 | Effect of stacking sequence on the fatigue behaviour of CFRP laminates developed for wind turbine blades Liu, Zhe ([email protected]), Nanyang Technological University, Singapore Li, Peifeng ([email protected]), Nanyang Technological University, Singapore Huang, Ruoxuan ([email protected]), Nanyang Technological University, Singapore Srikanth, Narasimalu ([email protected]), ERIAN, Nanyang Technological University, Singapore 18h10 8958 | EFFECTS OF TEST SET-UP ON THE INDUCED INTERNAL TORQUE IN FOUR-POINT BENDING OF THIN LAMINATES Wowk, Diane ([email protected]), Royal Military College of Canada, Canada Marsden, Catharine ([email protected]), Royal Military College of Canada, Canada 18h30 8644 | A new displacement based plate model accounts for transverse shear stress free conditions and transverse normal strain Sandeep Shiyekar ([email protected]), Shivaji University, India

31

TUESDAY 16 June Room VITUS I

Session 6.4 | Chairs: Pierluigi Colombi (Politecnico di Milano, Italy) and Ascione, Luigi (University of Salerno, Italy) 11h00 7577 | Verification of bonding performance of FRP hybrid rebar Ki-Tae Park ([email protected]), KICT, Korea, South Dongwoo Seo ([email protected]), KICT, Korea, South Ji-Hyun Hwang ([email protected]), KICT, Korea, South Young-Jun Yu ([email protected]), KICT, Korea, South Sangyoon Lee ([email protected]), KICT, Korea, South 11h20 9307 | On the structural design of the Portable Temporary Mataf Pedestrian Bridge Mohsen zadeh tabari,Golnaz ([email protected]), SL-Rasch GmbH, Germany Scheone,Stefan ([email protected]), SL-Rasch GmbH, Germany 11h40 9222 | BEHAVIOUR OF CONCRETE FILLED DOUBLE SKIN CIRCULAR STEEL TUBES IN AXIAL COMPRESSION (Behaviour of Concrete filled double skin circular steel tubes in axial compression) Essopjee, Yoosuf ([email protected]), University of Johannesburg, Department of Civil Engineering Science, South Africa Dundu, Morgan ([email protected]), University of Johannesburg, Department of Civil Engineering Science, South Africa 12h00 8539 | Effect of the inherent eccentricity in single-lap direct-shear tests of FRCM composites Carloni, Christian ([email protected]), University of Bologna, Italy D’Antino, Tommaso ([email protected]), University of Padova, Italy Sneed, Lesley H. ([email protected]), Missouri S&T, United States America Pellegrino, Carlo ([email protected]), University of Padova, Italy 12h20 9208 | Reinforcement of old masonry structures by advanced composites materials: experimental analysis and modelling. Gharib, Turath ([email protected]), University Claude Bernard Lyon1, France Gabor, Aron ([email protected]), University Claude Bernard Lyon1, France Ferrier, Emmanuel ([email protected]), University Claude Bernard Lyon1, France

Session 36 - Design and Application of Composite Structure Session 36.1 | Chairs: Sneed, Lesley H. ([email protected]), Missouri S&T, United States America 14h00 8706 | Design of the composite journal bearing for turbine/generator application Kang Yeong Choe ([email protected]), Chonbuk National University, Korea, South Seong Su Kim ([email protected]), Chonbuk National University, Korea, South 14h20 8742 | NUMERICAL ANALYSIS OF A MASONRY PANEL REINFORCED WITH PULTRUDED GFRP PROFILES Casalegno, Carlo ([email protected]), IUAV University of Venice, Italy Russo, Salvatore ([email protected]), IUAV University of Venice, Italy Sciarretta, Francesca ([email protected]), IUAV University of Venice, Italy

32

14h40 6991 | Discrete ply modelling of failure scenario of open-hole tensile test Achard Victor ([email protected]), Airbus France, France Castanié Bruno ([email protected]), Institut Clément Ader, France Bouvet Christophe ([email protected]), Institut Clément Ader, France Chirol Clément ([email protected]), Airbus France, France 15h00 8065 | Robust design of composite golf shafts considering fiber orientation errors in stacking process Hwang, Hui Yun ([email protected]), Andong National University, Korea, South Hwang, Sang Kyun ([email protected]), Andong National University, Korea, South Park, Se Gi ([email protected]), Andong National University, Korea, South Hwang, Uh Kyun ([email protected]), Andong National University, Korea, South Kim, Kyu He ([email protected]), Andong National University, Korea, South 15h20 9347 | Aeroelastic Instability Analysis of a Composite Wind Turbine Blade Rafiee, Roham ([email protected]), Faculty of New Sciences & Technologies, University of Tehran, Iran Moradi, Mohsen ([email protected]), Faculty of New Sciences & Technologies, University of Tehran, Iran

General Session Session General | Chairs: Sneed, Lesley H. ([email protected]), Missouri S&T, United States America 16h30 7770 | Fabrication and properties of steel-TiB2 composites (Metal Matrix Composites) Sulima, Iwona ([email protected]), Institute of Technology, Pedagogical University, Podchorążych 2 st., 30-084 Krakow, Poland, Poland Hyjek, Paweł ([email protected]), Institute of Technology, Pedagogical University, Podchorążych 2 st., 30-084 Krakow, Poland, Poland Sonia Boczkal ([email protected]), Institute of Non-Ferrous Metals in Gliwice, Light Metals Division Skawina, Poland 16h50 7852 | Methods for analysis of effective mechanical, thermal and electric properties of composite materials Salnikov, Vladimir ([email protected]), University of Caen Lower Normandy, France Lemaitre, Sophie ([email protected]), University of Caen Lower Normandy, France Choi, Daniel ([email protected]), University of Caen Lower Normandy, France Karamian, Philippe ([email protected]), University of Caen Lower Normandy, France 17h10 8059 | An Innovative Method of Suppressing Drilling-Induced Delamination in Composite Tube (drilling and machining) Hocheng, Hong ([email protected]), Department of Power Mechanical Engineering, National Tsing Hua University, Taiwan, Taiwan Tsao, Chung Chen ([email protected]), Department of Mechatronics Engineering,Ta Hua University of Technology, taiwan , Taiwan Chen, Hsiao Chung ([email protected]), Department of Power Mechanical Engineering, National Tsing Hua University, Taiwan, Taiwan 17h30 8374 | Composite Structure of Nb-Si-B Alloys Prepared by Spark Plasma Sintering Process Suk, Myung-Jin ([email protected]), Kangwon National University, Korea, South Kim, Sang-Hwan ([email protected]), Kangwon National University, Korea, South Kim, Young Do ([email protected]), Hanyang University, Korea, South Oh, Sung-Tag ([email protected]), Seoul National University of Science and Technology, Korea, South 17h50 9486 | Development of the gasket-integrated elastomer composite bipolar plate for high-temperature PEMFC Lee, Dongyoung ([email protected]), KAIST, Korea, South Lim, Jun Woo ([email protected]), Chonbuk National University, Korea, South Nam, Soohyun ([email protected]), KAIST, Korea, South Choi, Ilbeom ([email protected]), Agency for Defense Development, Korea, South Lee, Dai Gil ([email protected]), KAIST, Korea, South

33

TUESDAY 16 June Room VITUS II

Session 10 - Electro-Thermal Properties of Composite Materials

Session 10.1 | Chairs: Airoldi, Alessandro ([email protected]) 11h00 9205 | Numerical and experimental study of thermal energy storage of phase-change materials based on high-density polyethylene filled with micro-encapsulated paraffin wax Mustapha Karkri ([email protected]), Université Paris-Est, CERTES, 61 avenue du Général de Gaulle, 94010 Créteil France , France Mariam AlMaadeed A. ([email protected]), Center for Advanced Materials, Qatar University, 2713 Doha, Qatar, Qatar Igor Krupa2 ([email protected]), Center for Advanced Materials, Qatar University, 2713 Doha, Qatar, Qatar 11h20 9206 | Computational homogenization for the thermo-mechanical analysis of phase change composite materials Amen TOGNEVI ([email protected]), Université Paris-Est, France Mustapha Karkri ([email protected]), Université Paris-Est, France Julien YVONNET ([email protected]), Université Paris-Est, France Mariam A. AlMaadeed ([email protected]), Center for Advanced Materials, Qatar University, 2713 Doha, Qatar, Qatar Igor Krupa ([email protected]), Center for Advanced Materials, Qatar University, 2713 Doha, Qatar, Qatar 11h40 7775 | Structure of Reinforcing Filler Network Determined by On – line Measurement of Electrical Conductivity of the Polymer / Carbon Black Composite Chodak I ([email protected]), Polymer Institute SAS, Slovak Republic Krajci J ([email protected]), Polymer Institute SAS, Slovak Republic 12h00 8071 | Thermal conductivity enhancement of vertically aligned long nanotube carpet reinforced thermoset composites Bouillonnec, Jonathan ([email protected]), Institut Clément Ader, Mines Albi, France Bernhart, Gerard ([email protected]), Institut Clément Ader, Mines Albi, France Pinault, Mathieu ([email protected]), Laboratoire Francis Perrin, CEA Saclay, France Olivier, Philippe ([email protected]), Institut Clément Ader, Université Toulouse, France Mayne-L''Hermite, Martine ([email protected]), Laboratoire Francis Perrin, CEA Saclay, France 12h20 8072 | Novel method of metal – oxide glass composite fabrication for use in thermoelectric devices Bochentyn, Beata ([email protected]), Gdansk University of Technology, Poland Karczewski, Jakub ([email protected]), University of Technology, Poland Gazda, Maria ([email protected]), University of Technology, Poland Kusz, Bogusław ([email protected]), Gdansk University of Technology, Poland Session 10.2 | Chairs: Airoldi, Alessandro ([email protected]) 14h00 8655 | Laser Flash Analysis of Thermal Conductivity in Non-Homogeneous Polymer-VANT Composites Vorobyeva, Ekaterina A. ([email protected]), Lomonosov Moscow State University, Russian Federation Makarenko, Irina V. ([email protected]), Lomonosov Moscow State University, Russian Federation Chechenin, Nikolay G. ([email protected]), Lomonosov Moscow State University, Russian Federation 14h20 8720 | Investigation of the Thermal Insulation of Polyester Microfiber and also Polyester and Acrylic Fabrics Coated with White Tuff Stone Powder with Different Particle Size Mehmet Kilinc ([email protected]), Istanbul Commerce Universty, Turkey Habip Dayioglu ([email protected]), Istanbul Commerce Universty, Turkey Nigar Merdan ([email protected]), Istanbul Commerce Universty, Turkey Seyda Canbolat ([email protected]), Istanbul Commerce Universty, Turkey Mustafa Atmaca ([email protected]), Marmara University, Turkey

34

14h40 8928 | Numerical evaluation of residual stresses in composite structures Chwal, Malgorzata ([email protected]), Cracow University of Technology, Poland Stawiarski, Adam ([email protected]), Cracow University of Technology, Poland Muc, Aleksander ([email protected]), Cracow University of Technology, Poland

Session 25 - Failure and Damage Session 25.1 | Chairs: Muc, Aleksander ([email protected]), Cracow University of Technology, Poland 16h30 9198 | Fatigue failure and optimization of composite plates and shells with holes Muc, Aleksander ([email protected]), Cracow University of Technology, Poland 16h50 9200 | Prediction of Long Term Performance of GRP Pipes Subjected to Sustained External Pressure Based on Linear Regression Analysis Yoon, Sung Ho ([email protected]), Kumoh National Institute of Technology, Korea, South Oh, Jin Oh ([email protected]), Kumoh National Institute of Technology, Korea, South 17h10 9202 | Crack propagation in anisotropic materials under thermomechanical loading using XFEM Lyazid BOUHALA ([email protected]), Luxembourg Institute of Science and Technology , Luxembourg Ahmed Makradi ([email protected]), list, Luxembourg Salim Belouettar ([email protected]), list, Luxembourg 17h30 9162 | Plastic damage model for fatigue in composites Barbu, Lucia G. ([email protected]), CIMNE - Universitat Politecnica de Catalunya, Spain Martinez, Xavier ([email protected]), CIMNE - Universitat Politecnica de Catalunya, Spain Oller, Sergio ([email protected]), CIMNE - Universitat Politecnica de Catalunya, Spain Barbat, Alex H. ([email protected]), CIMNE - Universitat Politecnica de Catalunya, Spain 17h50 9176 | Numerical Simulation of Progressive Fatigue Damage in Laminated Composites Taheri-Behrooz, F. ([email protected]), Iran University of Science and Technology, Iran Mousavi, S.S. ([email protected]), Iran University of Science and Technology, Iran 18h10 7494 | 3D CRACK ANALYSIS OF A CHOPPED GLASS-REINFORCED POLYESTER CRUCIFORM SPECIMEN UNDER BIAXIAL LOADING USING TWO DIFFERENT NUMERICAL TECHNIQUES FOR MODELLING CRACKS: XFEM AND A PROGRESSIVE DAMAGE MODEL Navarro-Zafra, J. ([email protected]), University of Sheffield, United Kingdom Curiel-Sosa, J.L. ([email protected]), University of Sheffield, United Kingdom Serna Moreno, M.C. ([email protected]), Universidad de Castilla la Mancha, Spain 18h30 9149 | Post-buckling-driven surface delamination Wang, S ([email protected]), Loughborough University, United Kingdom Wang, B ([email protected]), Loughborough University, United Kingdom Harvey, CM ([email protected]), Loughborough University, United Kingdom Watson, A ([email protected]), Loughborough University, United Kingdom

35

TUESDAY 16 June Room VITUS III

Session 16 – Numerical Methods Session 16.1 | Chairs: Juri Majak, Carlos Santiuste 11h00 9207 | A new device and inverse method to characterize thermal properties of composite phase change materials: thermal conductivity, sensible and latent heat. Didier GOSSARD ([email protected]), Université Paris-Est, France Mustapha Karkri ([email protected]), Université Paris-Est, France Mariam A. AlMaadeed ([email protected]), Center for Advanced Materials, Qatar University, 2713 Doha, Qatar, Qatar Igor Krupa ([email protected]), Center for Advanced Materials, Qatar University, 2713 Doha, Qatar, Qatar 11h20 9163 | Numerical Modelling of Progressive Failure in Filament Wound Cylindrical Pressure Vessels Ellul, Brian ([email protected]), University of Malta, Malta Camilleri, Duncan ([email protected]), University of Malta, Malta 11h40 9088 | An incremental multilevel computational homogenization method for elastoplastic composites Trung Hieu Hoang ([email protected]), Département de Mécanique Numérique et Modélisation, De Vinci Technology Lab., Ecole Supérieure d’Ingénieurs Léonard de Vinci (ESILV),F-92916 Paris la Défense Cedex, France, France Mohamed Guerich ([email protected]), Département de Mécanique Numérique et Modélisation, De Vinci Technology Lab., Ecole Supérieured’Ingénieurs Léonard de Vinci (ESILV),F-92916 Paris la Défense Cedex, France, France Julien Yvonnet ([email protected]), Université Paris-Est, Laboratoire Modélisation et Simulation Multi-Echelle (MSME UMR CNRS 8208), 5 boulevard Descartes, F-77454 Marne La Vallée cedex, France, France 12h00 8987 | Element Free Galerkin Model for Orthogonal Cutting of Unidirectional Fibre-Reinforced Plastics (FRP) Kahwash, Fadi ([email protected]), Northumbria University , United Kingdom Shyha, Islam ([email protected]), Northumbria University , United Kingdom Maheri, Alireza ([email protected]), Northumbria University , United Kingdom 12h20 7553 | Volume integral equation method for scattering of SH waves by multilayered anisotropic inclusions Lee, Jungki ([email protected]), Hongik University, Korea, South 12h40 7606 | Convergence theorems for Haar wavelet based discretization method. New concept for expansion Majak, Ju ̈ri ([email protected]), Tallinn University of Technology, Estonia Haavajõe,Anti ([email protected]), Tallinn University of Technology, Estonia Mikola, Madis ([email protected]), Tallinn University of Technology, Estonia Shvartsman, Boris ([email protected]), Estonian Entrerpreneurship University of Appl. Sci., Estonia Pohlak, Meelis ([email protected]), Tallinn University of Technology, Estonia Session 16.2 | Chairs: Juri Majak, Carlos Santiuste 14h00 7608 | USE OF ARTIFICIAL NEURAL NETWORKS AND MONTE CARLO SIMULATIONS AS A PREDICTIVE METHOD TO DETERMINE STRENGHT OF HIGH PERFORMANCE CONCRETE (ASTM C39/C39 M) García Fernández, Francisco ([email protected]), Universidad Politécnica de Madrid, Madrid, Spain Acuña Pinaud, Luis ([email protected]), Universidad Nacional de Ingeniería, Lima, Peru Moromi Nakata, Isabel ([email protected]), Universidad Nacional de Ingeniería, Lima, Peru Torre Carrillo, Ana ([email protected]), Universidad Nacional de Ingeniería, Lima, Peru Espinoza Haro, Pedro ([email protected]), Universidad Nacional de Ingeniería, Lima, Peru

36

14h20 7637 | Simulation and optimization methodology for the development of structures manufactured by a combined sheet moulding compound and prepreg compression moulding process Bachem, Harald ([email protected]), Ostfalia University of Applied Science, Research Area for Driving Safety, Germany Fette, Marc ([email protected]), Composite Technology Center Stade (An Airbus Company) & Helmut Schmidt University, Institute of Production Engineering, Germany Stoess, Nicole ([email protected]), Polynt GmbH, Germany Herrmann, Axel ([email protected]), Composite Technology Center Stade (Airbus Company), Germany Wulfsberg, Jens ([email protected]), Helmut Schmidt University, Institute of Production Engineering, Germany 14h40 7735 | STRONG FORMULATION FINITE ELEMENT METHOD FOR ARBITRARY SHAPED COMPOSITE STRUCTURES Fantuzzi, N. ([email protected]), University of Bologna, Italy Tornabene, F. ([email protected]), University of Bologna, Italy Viola, E. ([email protected]), University of Bologna, Italy 15h00 9279 | Comparative Study of Flexural Versus Tensile Behaviour of fibre reinforced and sandwich composite Materials Using Finite Element Analysis (ANSYS code) (experimental and finite element method) Hassan Izadi Gonabadi ([email protected]), University of Newcastle, United Kingdom Steve Bull ([email protected]), University of Newcastle, United Kingdom 15h20 7915 | Numerical and experimental analysis of commingled yarns thermoplastic composites consolidation process Baochao, LI ([email protected]), Mines Douai, France Mylène, DELEGLISE ([email protected]), Mines Douai, France Chung-Hae, PARK ([email protected]), Mines Douai, France 15h40 8120 | COMPARATIVE STUDY OF NUMERICAL METHODS FOR DESIGNING SFRC SECTIONS SUBJECTED TO AXIAL FORCE AND BENDING MOMENT Portillo, J.P. ([email protected]), Facultad de Arquitectura, Universidad de la República, Uruguay Pérez-Zerpa, J.M. ([email protected]), Facultad de Ingeniería, Universidad de la República, Uruguay Segura-Castillo, L. ([email protected]), Facultad de Ingeniería, Universidad de la República, Uruguay Session 16.3 | Chairs: Jorge Belinha, INEGI, Portugal 16h30 8140 | Adaptive Concurrent Recursive Multi-Scale Method for Simulation of the Response of Laminated Composites to Underwater Blast Loading Bombace N. ([email protected]), Oxford University, United Kingdom Barbieri E. ([email protected]), Queen Mary University of London, United Kingdom Cui H. ([email protected]), Oxford University, United Kingdom Hoffmann J. ([email protected]), Oxford University, United Kingdom Petrinic N. ([email protected]), Oxford University, United Kingdom 16h50 8156 | FE analysis of carbon foam under multiple compressive loading Khelifa M. ([email protected]), University of Lorraine, France Fierro V. ([email protected]), University of Lorraine, France Celzard A. ([email protected]), University of Lorraine, France Letellier M. ([email protected]), University of Lorraine, France Delgado Sánchez C. ([email protected]), University of Lorraine, France 17h10 8731 | The inelastic analysis of plates considering a meshless method Belinha, Jorge ([email protected]), Instituto de Engenharia Mecânica e Gestão Industrial, Portugal Dinis, Lúcia ([email protected]), Faculdade de Engenharia da Universidade do Porto, Portugal Natal Jorge, Renato ([email protected]), Faculdade de Engenharia da Universidade do Porto, Portugal 17h30 8981 | Numerical comparison of geodesic, non-geodesic and generalized spline paths in order to wind complex, axisymmetric geometries Vargas R Erik ([email protected]), Université de Franche-Comté, France

37

TUESDAY 16 June Room VITUS IV

Session 34 – Probabilistic methods Session 34.1 | Chairs: Marcin Kaminski (Univ. Lodz, Poland) 11h00 7556 | The CGSM for static finite element analysis of composite structures with variability Yin, Qi ([email protected]), Laboratoire Roberval, Centre de Recherches de Royallieu, Université de Technologie de Compiègne, France Druesne, Frédéric ([email protected]), Laboratoire Roberval, Centre de Recherches de Royallieu, Université de Technologie de Compiègne, France Lardeur, Pascal ([email protected]), Laboratoire Roberval, Centre de Recherches de Royallieu, Université de Technologie de Compiègne, France 11h20 9142 | A Diffuse Approximation model for stochastic free vibration analysis of laminated composites Haeri, Ali and Fadaee Mohammadjavad ([email protected]), Shahid Bahonar University of Kerman, Iran, Iran 11h40 8284 | 2 AND 3D PROBABILISTIC HOMOGENIZATION OF THE CARBON FIBER-REINFORCED POLYMERS Kaminski, Marcin ([email protected]), Technical University of Lodz, Poland Pawlak, Anna ([email protected]), Technical University of Lodz , Poland 12h00 8547 | On the efficiency of fibrous reinforcement as a function of matrix crack density Rypl, Rostislav ([email protected]), Inst. of Structural Mechanics, Czech Republic Chudoba, Rostislav ([email protected]), Inst. of Structural Concrete, Germany Vořechovsky ́, Miroslav ([email protected]), Inst. of Structural Mechanics, Czech Republic

Session 17 – Micromechanics Session 17.1 | Chairs: Luciano, Raimondo (University of Cassino, Italy) and Ahmed Makradi (list, Luxembourg) 14h00 8995 | Numerical analysis of composites with inclusions periodically arranged in non-orthogonal coordinate system Caporale, Andrea ([email protected]), University of Cassino and Southern Lazio, Italy Luciano, Raimondo ([email protected]), University of Cassino and Southern Lazio, Italy 14h20 9201 | MULTISCALE MEAN-FIELD MODELING OF DUCTILE DAMAGE IN COMPOSITES W. L. Azoti ([email protected]), LIST, Luxembourg, Luxembourg A. Tchalla ([email protected]), LIST, Luxembourg, Luxembourg Y. Koutsawa ([email protected]), LIST, Luxembourg, Luxembourg A. Makradi ([email protected]), LIST, Luxembourg, Luxembourg S. Belouettar ([email protected]), LIST, Luxembourg, Luxembourg H. Zahrouni ([email protected]), University of Lorraine, France 14h40 7635 | Application of couple-stress theory for description of large strain bending of fibre composites Fedorova, Svitlana ([email protected]), Brno University of Technology, Czech Republic Lasota, Tomáš ([email protected]), Brno University of Technology, Czech Republic Burša, Jiří ([email protected]), Brno University of Technology, Czech Republic 15h00 9186 | 3D NUMERICAL COMPUTATION OF ELASTIC PROPERTIES OF A UNIDIRECTIONALLY REINFORCED LAMINA CONSIDERING A RANDOM ARRAY OF FIBRES Giner, Eugenio ([email protected]), Universidad Politécnica de Valencia, Spain Marco, Miguel ([email protected]), Universidad Carlos III de Madrid, Spain Vercher, Ana ([email protected]), Universidad Politécnica de Valencia, Spain

38

15h20 7047 | Analysis of micro-shear test of titanium nitride coatings deposited on left ventricular assist device Kopernik, Magdalena ([email protected]), AGH University of Science and Technology, Poland Milenin, Andrzej ([email protected]), AGH University of Science and Technology, Poland 15h40 7753 | Predicting the mechanical behaviour of a visco-plastic particulate composite at high volume fractions Li-Mayer, Joanna Y.S. ([email protected]), Imperial College London, United Kingdom Lewis, Daniel ([email protected]), AWE, United Kingdom Glauser, Annette ([email protected]), AWE, United Kingdom Charalambides, Maria N. ([email protected]), Imperial College London, United Kingdom Session 17.2 | Chairs: Luciano, Raimondo (University of Cassino, Italy) and Ahmed Makradi (list, Luxembourg) 16h30 7925 | SENSITIVITY OF MATRIX-DOMINATED FAILURE MODES TO CARBON/EPOXY CONSTITUENT PROPERTIES VIA COMPUTATIONAL MICROMECHANICS Danzi, Federico ([email protected]), University of Pisa, Italy Fanteria, Daniele ([email protected]), University of Pisa, Italy Panettieri, Enrico ([email protected]), University of Pisa, Italy 16h50 7963 | The Heat Treatment of HSS based copper infiltrated composites Madej Marcin ([email protected]), AGH University of Science and Technology, Poland Leszczynska-Madej Beata ([email protected]), AGH University of Science and Technology, Poland 17h10 7964 | The influence of production parameters on microstructure and properties of Al – SiC composites Leszczynska-Madej B. ([email protected]), AGH University of Science and Technology, Poland Madej M. ([email protected]), AGH University of Science and Technology, Poland 17h30 8650 | Failure Envelopes for Unidirectional Composites Generated by the HFGMC Micromechanical Method Levi-Sasson, Aviad ([email protected]), Tel-Aviv University, Israel Aboudi, Jacob ([email protected]), Tel-Aviv University, Israel Matzenmiller, Anton ([email protected]), University of Kassel, Germany Haj-Ali, Rami ([email protected]), Tel-Aviv University, Israel 17h50 8944 | Application of Lattice Composite Technologies to Aircraft Primary Structures Shanygin, Alexander N. ([email protected]), Central Aerohydrodynamic Institute (TsAGI), Russian Federation Kondakov, Ivan O. ([email protected]), Central Aerohydrodynamic Institute (TsAGI), Russian Federation 18h10 8292 | Fabrication, analysis of mechanical properties, and finite element model of shape memory alloy(SMA) fiber reinforced polymer composites Tian Gao ([email protected]), Engineering Simulation and Aerospace Computing (ESAC), Northwestern Polytechnical University, Xi’an, Shaanxi 710072, China, China Yingjie Xu ([email protected]), Engineering Simulation and Aerospace Computing (ESAC), Northwestern Polytechnical University, Xi’an, Shaanxi 710072, China, China

39

TUESDAY 16 June Room LAURUS

Session 18 – Multiscale Analysis Session 18.1 | Chairs: Tita, Volnei (University of São Paulo , Brazil) and Mauricio Caliri (University of São Paulo, Brazil) 11h00 9090 | Effective size of RVE for finite element analysis of structures made of nonlinear random composites T.H. Hoang ([email protected]), Departement de Mecanique Numerique et Modelisation, De Vinci Technology Lab., Ecole Superieure d’Ingenieurs Leonard de Vinci (ESILV), F-92916 Paris la Defense Cedex, France, France M. Guerich ([email protected]), Departement de Mecanique Numerique et Modelisation, De Vinci Technology Lab., Ecole Superieure d’Ingenieurs Leonard de Vinci (ESILV), F-92916 Paris la Defense Cedex, France, France J. Yvonnet ([email protected]), Universite Paris-Est, Laboratoire Modelisation et Simulation MultiEchelle MSME UMR 8208 CNRS, 5 bd Descartes, F-77454 Marne-la-Vallee, France, France 11h20 9066 | Efficient multiple length/time-scale simulation of large composite structures Pinho, Silvestre T. ([email protected]), Imperial College London, United Kingdom Gigliotti, Luigi ([email protected]), Imperial College London, United Kingdom 11h40 6928 | Multi-scale analysis of moisture diffusion coupled with stress distribution in CFRP composites Maozhou Meng ([email protected]), Plymouth University, United Kingdom Huirong Le ([email protected]), Plymouth University, United Kingdom MD Jahir Rizvi ([email protected]), Plymouth University, United Kingdom Stephen M Grove ([email protected]), Plymouth University, United Kingdom 12h00 8930 | HIERARCHICAL FINITE ELEMENT BASED MULTISCALE COMPUTATIONAL HOMOGENISATION OF COUPLED HYGRO-MECHANICAL ANALYSIS FOR FIBRE-REINOFRCED POLYMERS Ullah, Zahur ([email protected]), School of Engineering, University of Glasgow, United Kingdom Kaczmarczyk, Lukasz ([email protected]), School of Engineering, University of Glasgow, United Kingdom Pearce, Chris J. ([email protected]), School of Engineering, University of Glasgow, United Kingdom 12h20 7605 | Multi-scale Evaluation of the Linear Elastic and Failure Parameters of the Unidirectional Laminated Textiles Čalnerytė, Dalia ([email protected]), Kaunas University of Technology, Lithuania Barauskas, Rimantas ([email protected]), Kaunas University of Technology, Lithuania 12h40 7901 | Prediction of web-core sandwich plate nonlinear stiffness from a representative volume element Reinaldo Goncalves, Bruno ([email protected]), Aalto University, Finland Jelovica, Jasmin ([email protected]), Aalto University, Finland Romanoff, Jani ([email protected]), Aalto University, Finland Session 18.2 | Chairs: Tita, Volnei (University of São Paulo , Brazil) and and Mauricio Caliri (University of São Paulo, Brazil) 14h00 8162 | Numerical prediction of the uncertainties in the structural response of sandwich structures consisting of solid foams Hohe, Jörg ([email protected]), Fraunhofer-Institut fu ̈r Werkstoffmechanik IWM, Germany Beckmann, Carla ([email protected]), Fraunhofer-Institut fu ̈r Werkstoffmechanik IWM, Germany

40

14h20 8598 | Non-linear multiscale strategy to analyze composite materials efficiently Otero, Fermin ([email protected]), Technical University of Catalonia (UPC), International center for Numerical Methods in Engineering (CIMNE),Spain Martinez, Xavier ([email protected]), Technical University of Catalonia (UPC), International center for Numerical Methods in Engineering (CIMNE),Spain Oller, Sergio ([email protected]), Technical University of Catalonia (UPC), International center for Numerical Methods in Engineering (CIMNE), Spain 14h40 7535 | Meso and Macro Scale Numerical Modelling of 3D Woven Composites Cunningham, Paul R. ([email protected]), Loughborough University, United Kingdom Dai, Shuo ([email protected]), Loughborough University, United Kingdom 15h00 9153 | COMPUTATIONAL MODELLING OF THE PROGRESSIVE FAILURE IN HETEROGENEOUS ADHESIVES Anita, Catapano ([email protected]), Université de Bordeaux, I2M CNRS UMR 5295, France Julien, Jumel ([email protected]), Université de Bordeaux, I2M CNRS UMR 5295, France 15h20 7713 | Calibration and validation of Ladeveze ply model for predicting the crush performance of energy absorbing structures made of carbon-fiber reinforced plastics Qianjin Zhang ([email protected]), College of Textiles, Donghua University, Shanghai 201620, China, China Jing Xu ([email protected]), College of Textiles, Donghua University, Shanghai 201620, China, China Yichen Shen ([email protected]), ESI-group Shanghai representative�Shanghai 201620, China, China Pierre Culiere ([email protected]), ESI-group Shanghai representative�Shanghai 201620, China, France Yuqiu Yang ([email protected]), College of Textiles, Donghua University, Shanghai 201620, China, China 15h40 7928 | Transition of longitudinal compressive failure mode in a unidirectional carbon fiber reinforced plastic Tae-kun Jeong ([email protected]), Nihon University, Korea, South Masahito Ueda ([email protected]), Nihon University, Japan Session 36.2 | Chairs: Tita, Volnei (University of São Paulo , Brazil) and and Mauricio Caliri (University of São Paulo, Brazil) 16h30 9133 | Large sandwich structures fire tests modelling Goupil, Anne-Charlotte ([email protected]), Siemens, France Craveur, Jean-Charles ([email protected]), ISMANS, France Barabinot, Philippe ([email protected]), Siemens, France Mercier, Benjamin ([email protected]), ISMANS, France 16h50 9042 | Edge effects modeling in the design of laminated beams with curved inherent configuration Gorynin, Gleb L. ([email protected]), Surgut State University, Russian Federation 17h10 7093 | Static and dynamic analysis of bending-torsion coupling of a CFRP sandwich beam Bernard Loic ([email protected]), Institut Clément Ader, France Michon Guilhem ([email protected]), Institut Clément Ader, France Castanié Bruno ([email protected]), Institut Clément Ader, France Negre Vincent ([email protected]), Airbus Helicopter, France Reveillon Damien ([email protected]), Airbus Helicopter, France 17h30 8956 | Structural Design Optimization of CFRP Chopper Disks Weinzierl, Matthias ([email protected]), Institute of Lightweight Structures, Technische Universität Mu ̈nchen, Germany Schatz, Markus ([email protected]), Institute of Lightweight Structures, Technische Universität Mu ̈nchen, Germany Antonelli, Valeria ([email protected]), Institute of Lightweight Structures, Technische Universität Mu ̈nchen, Germany Baier, Horst ([email protected]), Institute of Lightweight Structures, Technische Universität Mu ̈nchen, Germany

41

17h50 8254 | Predictions of the strength of bonded connections in space opto-mechanical domain VIALE Roger ([email protected]), THALES ALENIA SPACE, France COQUILLARD Marc ([email protected]), Alpco3, France 18h10 8255 | A Simple and Reliable method for the Strength prediction of the CFRP UD Pieces VIALE Roger ([email protected]), THALES ALENIA SPACE, France COQUILLARD Marc ([email protected]), Alpco3, France

TUESDAY 16 June Room QUERCUS

Session 14.4 | Chairs: Jaime Vina Olay (University of Oviedo, Spain) 11h00 8067 | The oblique impact response of composite sandwich plates Ivañez, Ines ([email protected]), Universidad Carlos III of Madrid, Spain Moure, Marta M ([email protected]), Universidad Carlos III of Madrid, Spain Garcia-Castillo, Shirley K. ([email protected]), Universidad Carlos III of Madrid, Spain Sánchez-Sáez, Sonia ([email protected]), Universidad Carlos III of Madrid, Spain 11h20 8391 | A dual-scale modelling approach for multi-layered, multi-directionally reinforced laminated structures subjected to impact loading Hoffmann, Justus ([email protected]), University of Oxford, United Kingdom Cui, Hao ([email protected]), University of Oxford, United Kingdom Wiegand, Jens ([email protected]), The Cyprus Institute, Cyprus Petrinic, Nik ([email protected]), University of Oxford, United Kingdom 11h40 8303 | Effect of electrical discharges on the structural integrity of composite laminates Farto, E. M. ([email protected]), University of Coimbra, Portugal Amaro, A. M. ([email protected]), University of Coimbra, Portugal Santos, M. ([email protected]), University of Coimbra, Portugal Santos, J. B. ([email protected]), University of Coimbra, Portugal Reis, P. N. B. ([email protected]), University of Beira Interior, Portugal 12h00 8499 | MAGNETOHYDRODYNAMICS AND COUPLED ELECTRICAL/THERMAL/MECHANICAL FINTE ELEMENT SIMULATION OF LIGHTENING STRIKE EFFECT ON COMPOSITE PANELS Abdelal, G ([email protected]), Queen''s University Belfast, United Kingdom Foster, P ([email protected]), Queen''s University Belfast, United Kingdom Murphy, A ([email protected]), Queen''s University Belfast, United Kingdom 12h20 9231 | Impact response analysis of fiber-reinforced composite laminates Jian He ([email protected]), Aerospace and Civil Engineering Department, Harbin Engineering University, China Qipeng Tang ([email protected]), Aerospace and Civil Engineering Department, Harbin Engineering University, China Yunmeng Chen ([email protected]), Aerospace and Civil Engineering Department, Harbin Engineering University, China Xin Wei ([email protected]), Aerospace and Civil Engineering Department, Harbin Engineering University, China 12h40 8682 | A STUDY OF SCALING EFFECTS IN FILAMENT WOUND GRE TUBES SUBJECTED TO LOW VELOCITY IMPACT Hafeez,F ([email protected]), The Petroleum Institute, United Arab Emirates AlMaskari, F ([email protected]), The Petroleum Institute, United Arab Emirates

42

Session 33 – Multifunctional and Smart Composites Session 33.1 | Chairs: Khan, Kamran A. ([email protected]), Khalifa University of Science Technology and Research, United Arab Emirates 14h00 9167 | Optimization of constrained viscoelastic damping treatments Moreira, Rui A.S. ([email protected]), Universidade de Aveiro, Portugal Oliveira, Monica ([email protected]), Universidade de Aveiro, Portugal 14h20 7662 | Development of organic aerogels reinforced with carbonaceous nanomaterials Sanchez-Silva, Luz ([email protected]), University of Castilla La Mancha, Spain Simon-Herrero, Carolina ([email protected]), University of Castilla La Mancha, Spain Romero, Amaya ([email protected]), University of Castilla La Mancha, Spain Valverde, Jose Luis ([email protected]), University of Castilla La Mancha, Spain 14h40 7749 | Mechanical and rheological characteristics of carbonyl iron based magnetorheological elastomer composite Bica, Ioan ([email protected]), West University of Timisoara, Romania Liu, Ying Dan ([email protected]), Yanshan University, China Choi, Hyoung Jin ([email protected]), Inha University, Korea, South 15h00 7768 | Vibration of Porous Beams with Embedded Piezoelectric Sensors and Actuators Della, Christian N. ([email protected]), University of Glasgow, United Kingdom Shu, Dong Wei ([email protected]), Nanyang Technological University, Singapore 15h20 8670 | MASTERBATCH OF CELLULOSE BASED POLYMER COMPOSITES Biscaia, Sara ([email protected]), Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal Malça, Cândida ([email protected]), Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria and 2 Polytechnic Institute of Coimbra, ISEC, Portugal Viana, Tânia ([email protected]), Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal Mateus, Artur ([email protected]), Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal Mitchell, Geoffrey ([email protected]), Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal 15h40 8166 | Potential of Cyanoacrylate as Structural Adhesive for Fibre Reinforced Polymer Composites Fifo, Omosola ([email protected]), Biswajit Basu ([email protected]), Trinity College Dublin, Ireland Session 33.2 | Chairs: Khan, Kamran A. ([email protected]), Khalifa University of Science Technology and Research, United Arab Emirates 16h30 9482 | Design of a representative test probe of the state of stresses in the structural joint of the fuselage with main landing gear and wing-strut, of a two seat-aircraft built with composites Vargas-Rojas Erik ([email protected]), InstitutoPolitécnicoNacional, Mexico Parmentelat Bertrand ([email protected]), INSA Lyon, France Hernández-Moreno Hilario ( [email protected]), InstitutoPolitécnicoNacional, Mexico 16h50 8998 | FULLY COUPLED NONLINEAR ELECTRO-THERMO-VISCOELASTIC ANALYSES OF SMART COMPOSITES Khan, Kamran A. ([email protected]), Khalifa University of Science Technology and Research, United Arab Emirates Muliana, Anastasia H ([email protected]), Texas A&M University, United States America

43

TUESDAY 16 June Room OLIVA

Session 15.4 | Chairs: Marc, Oudjene ([email protected]), University of Lorraine, France And Belingardi, Giovanni ([email protected]), Politecnico di Torino - DIMEAS, Italy 11h00 8139 | On the numerical modelling of reinforced timber structures and joints Meghlat, E-M ([email protected]), university of Tizi-Ouzou, Algeria Oudjene, M ([email protected]), university of Lorraine, France Ait-Aider, H ([email protected]), university of Tizi-Ouzou, Algeria 11h20 8248 | EFFECT OF THICKNESS AND LAYUP ON THE MECHANICAL PROPERTIES OF COMPOSITE-METAL JOINTS STRENGTHENED BY SURFI-SCULPT Wei Xiong ([email protected]), Imperial College London, United Kingdom Bamber Blackman ([email protected]), Imperial College London, United Kingdom John P. Dear ([email protected]), Imperial College London, United Kingdom Xichang Wang ([email protected]), Beijing Aeronautical Manufacturing Technology Research Institute, China 11h40 8753 | Finite element analysis of the timber-to-concrete connection under dynamic loading using BTSA approach Arezki, Mansouri ([email protected]), university Mouloud Mammeri of Tizi-Ouzou, Algeria El-Mahdi, Meghlat ([email protected]), university Mouloud Mammeri of Tizi-Ouzou, Algeria Marc, Oudjene ([email protected]), University of Lorraine, France Hacène, Ait Aider ([email protected]), university Mouloud Mammeri of Tizi-Ouzou, Algeria 12h00 8785 | Investigation of creep phenomenon on composite material for bolt connections Scattina, Alessandro ([email protected]), Politecnico di Torino - DIMEAS, Italy Roncato, Davide ([email protected]), Centro Ricerche Fiat, Italy Belingardi, Giovanni ([email protected]), Politecnico di Torino - DIMEAS, Italy 12h20 9211 | Experimental investigation of the mechanical behavior of spot welding-adhesives joints Costa, Hector R. M. ([email protected]), CEFET/RJ, Brazil Lopes, Diego M. ([email protected]), CEFET/RJ, Brazil Souza, Juliana P. B. ([email protected]), CEFET/RJ, Brazil Aguiar, Ricardo A. A. ([email protected]), CEFET/RJ, Brazil Pacheco, Pedro M. C. L ([email protected]), CEFET/RJ, Brazil 12h40 8628 | Design the adhesive joints between PEI and CFRP for the composite ultracentrifuge rotor Yoon, Soon Ho ([email protected]), Korea Institute of Material Science, Korea, South Lee, Hak Gu ([email protected]), Korea Institute of Material Science, Korea, South Park, Jisang ([email protected]), Korea Institute of Material Science, Korea, South Kim, Kyoung Deok ([email protected]), Korea Institute of Material Science, Korea, South

44

Session 7 – Innovative Applications Session 7.1 | Chairs: Cristóvão Mota Soares, Aurelio Auraújo 14h00 9192 | FEM Analysis of a Tailored B-Pillar using composite materials Nicolas Saba ([email protected]), University of Balamand, Lebanon Jihad Rishmany ([email protected]), University of Balamand, Lebanon Issam Tawk ([email protected]), University of Balamand, Lebanon 14h20 6380 | Organic/inorganic composite fibers for x-ray protection applications Mahltig, Boris ([email protected]), Hochschule Niederrhein, Germany Kyosev, Yordan ([email protected]), Hochschule Niederrhein, Germany Gu ̈nther, Karoline ([email protected]), Hochschule Niederrhein, Germany Giebing, Christina ([email protected]), Hochschule Niederrhein, Germany Gersching, Detlef ([email protected]), TITK, Germany Krieg, Marcus ([email protected]), TITK, Germany 14h40 7795 | Experimental study on mechanical behavior of FRP reinforced 3D printed elements Meng, Xin M. ([email protected]), Tsinghua University, China Feng, Peng ([email protected]), Tsinghua University, China 15h00 7821 | Carbon fiber/thermoplastic bipolar plate-carbon felt electrode assembly for vanadium redox flow batteries (VRFB) Lim, Jun Woo ([email protected]), Chonbuk National University, Korea, South Lee, Dongyoung ([email protected]), KAIST, Korea, South Kim, Minkook ([email protected]), KAIST, Korea, South Choe, Jaeheon ([email protected]), KAIST, Korea, South Lee, Dai Gil ([email protected]), KAIST, Korea, South 15h20 9575 | Manufacturing of the carbon/phenol composite bipolar plate for PEMFC with hot rolling process Kim, Minkook ([email protected]), KAIST, Korea, South Choe, Jaeheon ([email protected]), KAIST, Korea, South Lim, Jun Woo ([email protected]), Chonbuk National University, Korea, South Lee, Dai Gil ([email protected]), KAIST, Korea, South

Session 32 – Textile Structural Composites Session 32.1 | Chairs: CORINALDESI, Valeria ([email protected]), Università Politecnica delle Marche, Ancona, Italy 16h30 8146 | Improving adhesion at the fibers/matrix interface in FRCM for masonry strengthening CORINALDESI, Valeria ([email protected]), Università Politecnica delle Marche, Ancona, Italy DONNINI, Jacopo ([email protected]), Università Politecnica delle Marche, Ancona, Italy 16h50 8707 | Tribological characteristics of Carbon/PVDF composites Seung A Song ([email protected]), Chonbuk National University, Korea, South Seong Su Kim ([email protected]), Chonbuk National University, Korea, South 17h10 8719 | Investigation of the Acoustic Insulation of Polyester and Acrylic Fabrics Coated with White Tuff Stone Powder Seyda Canbolat ([email protected]), Istanbul Commerce University, Turkey Habip Dayioglu ([email protected]), Istanbul Commerce University, Turkey Nigar Merdan ([email protected]), Istanbul Commerce University, Turkey Mehmet Kilinc ([email protected]), Istanbul Commerce University, Turkey

45

17h30 8722 | The Evaluation of Thermal and Acoustic Insulation of Different Particle Size Perlite Coated Materials Having Gecko Properties Habip Dayioglu ([email protected]), Istanbul Commerce Universty, Turkey Nigar Merdan ([email protected]), Istanbul Commerce Universty, Turkey Seyda Canbolat ([email protected]), Istanbul Commerce Universty, Turkey Mehmet Kilinc ([email protected]), Istanbul Commerce Universty, Turkey Mustafa Atmaca ([email protected]), Marmara University, Turkey 17h50 9209 | Analysis and modelling of physical and mechanical properties of 2D and 3D circularly braided composites. Gabor, Aron ([email protected]), University Claude Bernard Lyon 1, France Hamelin, Patrice ([email protected]), University Claude Bernard Lyon 1, France Guyader, Guillaume ([email protected]), University Claude Bernard Lyon 1, France 18h10 8587 | Intraply Shear Characterisation of Carbon/Epoxy Prepregs for Automotive Press-forming Applications at Appropriate Temperatures and Strain Rates Khan, M. A. ([email protected]), WMG, The University of Warwick, Coventry, United Kingdom Reynolds, N. ([email protected]), WMG, The University of Warwick, Coventry, United Kingdom Williams, G. J. ([email protected]), WMG, The University of Warwick, Coventry, United Kingdom Kendall, K. N. ([email protected]), WMG, The University of Warwick, Coventry, United Kingdom 18h30 9698 | Minimum-weight design for three dimensional woven composite stiffened panels using neural networks and genetic algorithms Fu,Xinwei ([email protected]), Department of Aerospace Science and Technology, Politecnico di Milano, Italy Ricci,Sergio ([email protected]), Department of Aerospace Science and Technology, Politecnico di Milano, Italy Bisagni,Chiara ([email protected]), Department of Aerospace Science and Technology, Politecnico di Milano, Italy

TUESDAY 16 June Room CASTANEA

Session 19.4 | Chairs: Merijs Meri, R. ([email protected]), Riga Technical University, Institute of Polymer Materials, Latvia 11h00 7902 | Novel Colloidal Processing Routes to Layered Hydroxide Filler-Based Nano-Composites LANGRY, Arthur ([email protected]), ICCF UMR 6296, France KOENIG, Andrej ([email protected]), BASF COATINGS, Germany LEROUX, Fabrice ([email protected]), ICCF UMR 6296, France HINTZE-BRUENING, Horst ([email protected]), BASF COATINGS, Germany 11h20 7945 | Development and research of nanostructured multilayer composite coatings for tungsten-free carbide with extended area of technological applications Vereschaka, Alexey A. ([email protected]), MSTU STANKIN, Russian Federation Batako, Andre D. ([email protected]), Liverpool John Moores University, Great Britain Vereschaka, Anatoly S. ([email protected]), MSTU STANKIN, Russian Federation Sedych, Mikhail I. ([email protected]), MSTU STANKIN, Russian Federation 11h40 7987 | Thermal, mechanical and morphological properties of nanosized silica/polyethylene and POSS/polyethylene nanocomposites Niemczyk, Arkadiusz ([email protected]), Opole University, Poland Dziubek, Katarzyna ([email protected]), Opole University, Poland Czaja, Krystyna ([email protected]), Opole University, Poland

46

12h00 8092 | Structure and elastic properties of modified polycarbonate (PC) / acrylonitrile-butadiene-styrene (ABS) copolymer blend composites with organically modified nanoclay Merijs Meri, R. ([email protected]), Riga Technical University, Institute of Polymer Materials, Latvia Zicans, J. ([email protected]), Riga Technical University, Institute of Polymer Materials, Latvia Ivanova, T. ([email protected]), Riga Technical University, Institute of Polymer Materials, Latvia Berzina, R. ([email protected]), Riga Technical University, Institute of Polymer Materials, Latvia Maksimov, R. ([email protected]), University of Latvia, Institute of Polymer Mechanics, Latvia 12h20 8079 | CNT/Al nanocomposites produced by hot extrusion and powder metallurgical route using dispersion/mixture technique Simões, S ([email protected]), CEMUC, University of Porto, Portugal Cruz, S ([email protected]), AIMEN Technology Center, Spain Rey, P ([email protected]), AIMEN Technology Center, Spain Viana, F ([email protected]), CEMUC, University of Porto, Portugal Vieira, F. M. ([email protected]), CEMUC, University of Porto, Portugal Session 19.5 | Chairs: Simões, S ([email protected]), CEMUC, University of Porto, Portugal 14h00 8258 | Particularity concerning the use of magnetorheological fluids / nanofluids, to obtain polymeric nanocomposites materials Crainic, N. ([email protected]), Politehnica University of Timisoara, Romania Torres Marques, A. ([email protected]), Intituto de Engenharia Mecanica e Gestao Industrial, Portugal Vekas, L. ([email protected]), Romanian Academy - Timisoara Division, Romania Novoa, P. ([email protected]), Intituto de Engenharia Mecanica e Gestao Industrial, Portugal Marinica, O. ([email protected]), Politehnica Universiry of Timisoara, Romania Moreira De Sa, C. ([email protected]), Centro de Engenharia de Materias da Universidade do Porto, Portugal Popa, N ., C. ([email protected]), Romanian Academy - Timisoara Division, Romania 14h20 8554 | Influence of micro- and nano-particles on the mechanical and physical properties of pure copper Dash, Khushbu ([email protected]), Oxford University, United Kingdom Trojanova, Zuzanka ([email protected]), Charles University in Prague, Czech Republic Džugan, J. ([email protected]), 3COMTES FHT, Czech Republic 14h40 8595 | A nonlocal finite element approach for capturing size effects in nanocomposites De Domenico, Dario ([email protected]), University Mediterranea of Reggio Calabria, Italy, Italy Fuschi, Paolo ([email protected]), University Mediterranea of Reggio Calabria, Italy, Italy Pisano, Aurora A. ([email protected]), University Mediterranea of Reggio Calabria, Italy, Italy 15h00 8746 | Beating phenomenon and energy localization in Single-Walled Carbon Nanotubes Strozzi, Matteo ([email protected]), University of Modena and Reggio Emilia, Italy Manevitch, Leonid I. ([email protected]), Russian Academy of Sciences, Russian Federation Pellicano, Francesco ([email protected]), University of Modena and Reggio Emilia, Italy Barbieri, Marco ([email protected]), University of Modena and Reggio Emilia, Italy Zippo, Antonio ([email protected]), University of Modena and Reggio Emilia, Italy 15h20 8793 | Mechanical Behavior of Graphene encapsulated Plastics Tsai, I-Shou ([email protected]), Department of Fiber and Composites, Feng Chia University, Taiwan Hsu, Ping-Cheng ([email protected]), Department of Fiber and Composites, Feng Chia University, Taiwan

47

Session 38 – Mechanics and Engineering of Lattice & Structured Material Session 38.1 | Chairs: Fraternali, Fernando (University of Salerno, Italy) and Atul Bhaskar (Univ. Southampton, UK) 16h30 6727 | On the optimal design of tensegrity lattices Fraternali, Fernando ([email protected]), University of Salerno, Italy Amendola, Ada ([email protected]), University of Salerno, Italy Carpentieri, Gerardo ([email protected]), University of Salerno, Italy 16h50 9035 | Structure-property relationship of additively manufactured lattice materials: micromechanics and measurements Cuan-Urquizo, Enrique ([email protected]), University of Southampton, United Kingdom Bhaskar, Atul ([email protected]), University of Southampton, United Kingdom 17h10 9026 | Mechanical response of an auxetic cellular sheet under plastic deformation Bonfanti, Alessandra ([email protected]), University of Southampton, United Kingdom Bhaskar, Atul ([email protected]), University of Southampton, United Kingdom 17h30 7839 | Hierarchical composite lattice structures Yin Sha ([email protected]), Beihang University, China Zhang Boming ([email protected]), Beihang University, China Wu Sujun ([email protected]), Beihang University, China Robert O. Ritchie ([email protected]), Beihang University, China 17h50 8636 | Vibro-acoustic optimization of sandwich panels involving hexagonal honeycomb cores Droz, Christophe ([email protected]), Ecole Centrale de Lyon (LTDS), France Zergoune, Zakaria ([email protected]), Ecole Centrale de Lyon (LTDS), France Baho, Omar ([email protected]), Ecole Centrale de Lyon (LTDS), France Christen, Jean-Loup ([email protected]), Ecole Centrale de Lyon (LTDS), France Ichchou, Mohamed ([email protected]), Ecole Centrale de Lyon (LTDS), France 18h10 7842 | The effect of different valency cations on the sintering process of magnesium oxide composites Szczerba, Jacek ([email protected]), AGH University of Science and Technology, Faculty of Materials Science and Ceramics, al. A. Mickiewicza 30, 30-059 Krakow, Poland, Poland Madej, Dominika ([email protected]), AGH University of Science and Technology, Faculty of Materials Science and Ceramics, al. A. Mickiewicza 30, 30-059 Krakow, Poland, Poland

48

TUESDAY 16 June Room NUX

Session 25.2 | Chairs: Simon Wang and Harvey, CM (Loughborough University, UK) 11h00 7468 | Evaluation of compressive test methods for braided composites using coupon and tube specimens Michaelis, Daniel ([email protected]), Institute of Aircraft Design, Germany Prinz, Nicolai ([email protected]), Institute of Aircraft Design, Germany Krauter, Anja ([email protected]), Institute of Aircraft Design, Germany Middendorf, Peter ([email protected]), Institute of Aircraft Design, Germany 11h20 9229 | Dynamic behavior of ocean current turbine blade with damage Lecheb Samir ([email protected]), University of Boumerdes, Algeria Nour Abdelkader ([email protected]), University of Boumerdes, Algeria Mechakra Hamza ([email protected]), University of Boumerdes, Algeria Chellil Ahmed ([email protected]), University of Boumerdes, Algeria f Hidouchi Hamza ([email protected]), University of Boumerdes, Algeria Naceur Hakim ([email protected]), School of Engineering ENSIAME, France 11h40 7532 | MODELLING ADHESIVELY-BONDED JOINTS IN COMPOSITE STRUCTURES BY COHESIVE ZONE MODELS Campilho, Raul D.S.G. ([email protected]), ISEP, Portugal 12h00 7616 | Experimental Verification of a Matrix Failure Criterion for a Laminated Composite Material under Biaxial Loading Chowdhury, Nayeem T. ([email protected]), Monash University, Australia Wang, John J. ([email protected]), Defence Science and Technology Organisation, Australia Chiu, Wing K. ([email protected]), Monash University, Australia Yan, Wenyi ([email protected]), Monash University, Australia 12h20 7626 | Numerical procedure for mesoscopic scale damage modeling of woven polymer matrix composites Doitrand A. ([email protected]), Onera -The French Aerospace Lab, France Fagiano C. ([email protected]), Onera -The French Aerospace Lab, France Hirsekorn M. ([email protected]), Onera -The French Aerospace Lab, France Chiaruttini V. ([email protected]), Onera -The French Aerospace Lab, France 12h40 7632 | Study of the interlanminar fracture of composite materials in mode III Cynthia Aoun ([email protected]), University Of Balamand, Lebanon Assaad Hani ([email protected]), University Of Balamand, Lebanon Issam Tawk ([email protected]), University Of Balamand, Lebanon Jihad Rishmany ([email protected]), University Of Balamand, Lebanon Session 25.3 | Chairs: Simon Wang and Harvey, CM (Loughborough University, UK) 14h00 7676 | Brittle interface crack between two elastic layers Harvey, C. M. ([email protected]), Loughborough University, United Kingdom Wood, J. D. ([email protected]), Loughborough University, United Kingdom Wang, S. ([email protected]), Loughborough University, United Kingdom Watson, A. ([email protected]), Loughborough University, United Kingdom 14h20 7677 | Experimental assessment of mixed-mode partition theories for fracture toughness in laminated composite beams Harvey, C. M. ([email protected]), Loughborough University, United Kingdom Eplett, M. ([email protected]), Loughborough University, United Kingdom Wang, S. ([email protected]), Loughborough University, United Kingdom Cunningham, P. ([email protected]), Loughborough University, United Kingdom

49

14h40 7678 | Effect of through the Thickness Selective Stitching on Inter-laminar Strength in Bonded Lap Joints of Composite Laminates Herle, Hemanth R. ([email protected]), Infosys Limited, India Kumar, Ravi GVV ([email protected]), Infosys Limited, India 15h00 8739 | Influence of fibre aqueous-based sizing treatments and of the matrix intrinsic reinforcement on the damage mechanisms of novel laminated acrylic thermoplastic composites Matadi Boumbimba, Rodrigue ([email protected]), 1- National Engineering School of Metz, France Wang, Kui ([email protected]), 2- CRP Henri Tudor, Department of Advanced Materials and Structures, Luxembourg Frédéric, Addiego ([email protected]), 2- CRP Henri Tudor, Luxembourg Martin, Arnaud ([email protected]), 2- CRP Henri Tudor, Luxembourg Gerard, Pierre ([email protected]), 3- ARKEMA, Groupement de Recherche de Lacq, France Ruch, David ([email protected]), 2- CRP Henri Tudor, Department of Advanced Materials and Structures, Luxembourg 15h20 7727 | Mechanical properties of a high strength Aluminium Alloy developed for ballistic protection application Queudet Hippolyte ([email protected]), Institut de recherche de Saint Louis, Saint Louis, France Lemonnier Sébastien ([email protected]), Institut de recherche de Saint Louis, Saint Louis, France Barraud Elodie ([email protected]), Institut de recherche de Saint Louis, Saint Louis, France Allain Nathalie ([email protected]), LEM3, UMR CNRS 7239, Université de Lorraine, Metz, France Gaffet Eric ([email protected]), Institut Jean Lamour, UMR 7198 CNRS, Université de Lorraine, Nancy, France 15h40 7745 | Analysis of the crack propagation in composites with irregular microstructure Podgórski, Jerzy ([email protected]), Lublin University of Technology, Poland Session 25.4 | Chairs: Simon Wang and Harvey, CM (Loughborough University, UK) 16h30 7766 | A fatigue failure theory for fibre-reinforced composite laminates based on the improved Puck’s failure theory Dong, Hai ([email protected]), Peking University, China Li, Zhi ([email protected]), Peking University, China Wang, Jianxiang ([email protected]), Peking University, China Karihaloo, Bhushan ([email protected]), Cardiff University, United Kingdom 16h50 7835 | Stress concentration of composite laminates with large cutouts Chen, Jianlin ([email protected]), Peking University, China Li, Zheng ([email protected]), Peking University, China Xu, Jifeng ([email protected]), Beijing Aeronautical Science & Technology Research Center, China Lu, Zizi ([email protected]), Beijing Aeronautical Science & Technology Research Center, China Wang, Yan ([email protected]), Beijing Aeronautical Science & Technology Research Center, China 17h10 7849 | Investigation of the interaction of damage mechanisms in composite materials Stier, Bertram ([email protected]), Institute of Applied Mechanics, Germany Bednarcyk, Brett A. ([email protected]), NASA Glenn Research Center, United States America Simon, Jaan-W. ([email protected]), Institute of Applied Mechanics, Germany Stefanie Reese ([email protected]), Institute of Applied Mechanics, Germany 17h30 7908 | Numerical and experimental investigation of composite tubes under hydrostatic pressure Pavlopoulou, Sofia ([email protected]), University of Manchester, United Kingdom Roy, Sree Shankhachur ([email protected]), University of Manchester, United Kingdom Gautam, Mayank ([email protected]), University of Manchester, United Kingdom Potluri, Prasad ([email protected]), University of Manchester, United Kingdom 17h50 7922 | Continuum damage model for inter-fibre failure of unidirectional laminates Cui, Hao ([email protected]), University of Oxford, United Kingdom Hoffmann, Justus ([email protected]), University of Oxford, United Kingdom Wiegand, Jens ([email protected]), University of Oxford, United Kingdom Petrinic, Nik ([email protected]), University of Oxford, United Kingdom

50

18h10 7105 | Comparisons of performances of several new designs of shockAbsorbers Dorival, Olivier ([email protected]), Institut Clément Ader - Toulouse, France Navarro, Pablo ([email protected]), Institut Clément Ader - Toulouse, France Ferrero, Jean Francois ([email protected]), Institut Clément Ader - Toulouse, France Petiot, Caroline ([email protected]), Airbus group SAS Innovations, France Bermudez, Michel ([email protected]), Airbus group SAS Innovations, France

Wednesday 17 June Room MORUS IV

Session 2.7 | Chairs: Jansen, Eelco (Leibniz Universität Hannover, Germany) and Paul Weaver (University of Bristol, UK) 11h00 8759 | Efficient Models for Initial Post-Buckling Analysis of Variable Stiffness Curved Panels Jansen, Eelco ([email protected]), Leibniz Universität Hannover, Institute of Structural Analysis, Germany Weaver, Paul ([email protected]), University of Bristol, Advanced Composites Centre for Innovation and Science, United Kingdom Rahman, Tanvir ([email protected]), TNO DIANA BV, Netherlands White, Simon ([email protected]), University of Bristol, Advanced Composites Centre for Innovation and Science, United Kingdom Rolfes, Raimund ([email protected]), Leibniz Universität Hannover, Institute of Structural Analysis, Germany 11h20 9285 | Influence of elastic coupling and anisotropy on uncertainty quantification in the aeroelastic response of idealized composite wings Nitschke, Christian T. ([email protected]), Université Pierre & Marie Curie, Paris, France Maruani, Jonas ([email protected]), Université Pierre & Marie Curie, Paris, France Vincenti, Angela ([email protected]), Université Pierre & Marie Curie, Paris, France Chassaing, Jean-Camille ([email protected]), Université Pierre & Marie Curie, Paris, France Lucor, Didier ([email protected]), Université Pierre & Marie Curie, Paris, France 11h40 6934 | Buckling of Composite Plates under Biaxial Compressive Loads Della, Christian N. ([email protected]), University of Glasgow, Singapore Ngan, Jing Xun ([email protected]), University of Glasgow, Singapore Loh, Jieshen ([email protected]), University of Glasgow, Singapore 12h00 7014 | Nonlinear Dynamic Instability Analysis of Laminated Composite Stiffened Plates Patel, Shuvendu N. ([email protected]), BITS Pilani, Pilani Campus, India 12h20 8208 | Composite Concrete Elements Reinforced by Perforated Steel Sheets; Corbel Approach Apostolidi, Eftychia ([email protected]), University of Natural Resources and Life Sciences, Austria Strauss, Alfred ([email protected]), University of Natural Resources and Life Sciences, Austria 12h40 9184 | Computational analysis of damage in hybrid composite structure Had, Jiri ([email protected]), Czech Technical University in Prague, Czech Republic Ruzicka, Milan ([email protected]), Czech Technical University in Prague, Czech Republic

51

Session 2.8 | Chairs: Boscolo, Marco (Airbus, United Kingdom) and Ascione, Luigi (University of Salerno, Italy) 14h00 8752 | LAYER WISE ANALITYCAL SOLUTION FOR FREE VIBRATION ANALYSIS OF COMPOSITE PLATES AND PLATES ASSEMBLIES Boscolo, Marco ([email protected]), Airbus, United Kingdom 14h20 7686 | Validation of anisotropic damage model for the simulation of textile reinforced concrete shells exhibiting strainhardening response Sharei, Ehsan ([email protected]), Institute of Structural Concrete, RWTH Aachen University, Germany Scholzen, Alexander ([email protected]), Institute of Structural Concrete, RWTH Aachen University, Germany Chudoba, Rostislav ([email protected]), Institute of Structural Concrete, RWTH Aachen University, Germany Hegger, Josef ([email protected]), Institute of Structural Concrete, RWTH Aachen University, Germany 14h40 8770 | INFLUENCE OF BINDER CONFIGERATION ON 3D WOVEN COMPOSITES Dhiman, Sarvesh ([email protected]), University of Manchester, United Kingdom Silva, Chris ([email protected]), M Wright & Sons, United Kingdom Potluri, Prasad ([email protected]), University of Manchester, United Kingdom 15h00 7956 | Numerical Analysis of the Influence of Ply Waviness on the mechanical Behaviour of Composite Laminates by using laminated RVE Peng He ([email protected]), Quanzhou Insitute of Equipment Manufacturing, Chinese Academy of Sciences, China Horst Baier ([email protected]), Insitute of Lightweight Structures, Technical University of Munich, Germany 15h20 8697 | Analytical formulation for the postbuckling analysis of unsymmetrically laminated composite plates under combined inplane compression and shear loading Kun Nie ([email protected]), School of Aerospace Engineering and Applied Mechanics,Tongji University, China Yi Liu ([email protected]), School of Aerospace Engineering and Applied Mechanics,Tongji University, China Ying Dai ([email protected]), School of Aerospace Engineering and Applied Mechanics,Tongji University, China 15h40 9388 | Full bandgap for in-plane waves in thin plates: numerical modelling and experiment Méndez-Sánchez, Rafael ([email protected]), Universidad Nacional Autónoma de México, Mexico Ramírez-Ramírez, Filiberto ([email protected]), Universidad Autónoma Metropolitana- Azcapotzalco, Mexico Franco-Villafañe, John ([email protected]), Universidad Nacional Autónoma de México, Mexico Báez, Gabriela ([email protected]), Universidad Autónoma Metropolitana-Azcapotzalco, Mexico Session General | Chairs: Boscolo, Marco (Airbus, United Kingdom) and Ascione, Luigi (University of Salerno, Italy) 16h30 7930 | Tribological properties and a wear model of aluminium alloy matrix composites Wieczorek Jakub JW ([email protected]), Silesian University of Technology, Poland 16h50 8843 | Determination of ultimate strength and fatigue limit of particulate reinforced metal matrix composites (PRMMC) by using upper-and-lower bound approaches Chen, G. ([email protected]), RWTH Aachen University, Germany Ozden, U.A. ([email protected]), RWTH Aachen University, Germany Bezold, A. ([email protected]), RWTH Aachen University, Germany Broeckmann, C. ([email protected]), RWTH Aachen University, Germany Weichert, D. ([email protected]), Institute of General Mechanics, Germany 17h10 8700 | Interface compatibilization of high performance thermoplastic composites by surface activation and supramolecular assembly as a versatile way to obtain environmental friendly adhesion promotion Martin, Arnaud ([email protected]), CRP Henri Tudor, Luxembourg Addiego, Frédéric ([email protected]), CRP Henri Tudor, Luxembourg Bardon, Julien ([email protected]), CRP Henri Tudor, Luxembourg

52

Michel, Marc ([email protected]), CRP Henri Tudor, Luxembourg Ruch, David ([email protected]), CRP Henri Tudor, Luxembourg 17h30 8970 | Damage assessment of notched composite structures and adhesively bonded repairs Martínez Vicente, Juan Luis ([email protected]), University of Castilla-La Mancha, Spain Caminero Torija, Miguel Ángel ([email protected]), University of Castilla-La Mancha, Spain López Cela, Juan José ([email protected]), University of Castilla-La Mancha, Spain 17h50 9056 | Structural Properties and Mechanical Behavior of the Reinforced Titanium Fiber on Al-Si/SiCp Metal Matrix Composite by Powder Metallurgy (Metal Matrix Composite) Oak, Jeong-Jung ([email protected]), Pusan National University, Korea, South Bang, Jeongil ([email protected]), Pusan National University, Korea, South Chun, Ho-Hwan ([email protected]), Pusan National University, Korea, South Park, Yong Ho ([email protected]), Pusan National University, Korea, South 18h10 8021 | Investigation of mechanical behavior of a bone plate made of bioresorbable phosphate glass fiber reinforced PLA composite Hassan ([email protected]), Chung-Ang University, Korea, South Kyung-Chae ([email protected]), Chung-Ang University, Korea, South Min-Gu ([email protected]), Chung-Ang University, Korea, South Seung-Hwan ([email protected]), Chung-Ang University, Korea, South 18h30 8767 | Investigation of Sintering Condition and Mechanical Property of Al-Si-Cu-Mg/SiCp MMC Fabricated by Powder Metallurgy Jeongil Bang ([email protected]), Pusan National University, Korea, South Jeong-Jung Oak ([email protected]), Pusan National University, Korea, South Eun Sun Lee ([email protected]), Pusan National University, Korea, South Yonghwan Kim ([email protected]), Pusan National University, Korea, South Yongho Park ([email protected]), Pusan National University, Korea, South

Wednesday 17 June Room VITUS I

Session 20 – Natural Fibre Composites

Session 20.1 | Chairs: Campilho, Raul D.S.G. (ISEP, Portugal) 11h00 7742 | Effects of cellulose fiber content on physical properties of polyurethane based composites HADJADJ, Aomar ([email protected]), University of Reims, France JBARA, Omar ([email protected]), University of Reims, France TARA, Ahmed ([email protected]), University of Reims, France GILLIOT, Mickael ([email protected]), University of Reims, France MALEK, Fouad ([email protected]), University of Oujda, Morocco MAAFI, El-Miloud ([email protected]), University of Oujda, Morocco TIGHZERT, Lan ([email protected]), University of Oujda, France

53

11h20 9230 | An Experimental Investigation into the Enhanced Mechanical Performance of A Hybrid Jute-Steel Composite Mache, Ashok ([email protected]), Indian Institute of Science, Bangalore, India Deb, Anindya ([email protected]), Indian Institute of Science, Bangalore, India Venkatesh, Gude S. ([email protected]), Visvesvaraya Technological University, Bangalore, India 11h40 9159 | Fracture mechanics property of high strength concrete reinforced with basalt fibers Guo Yihong ([email protected]), Harbin Engineering University, China Tong Lili ([email protected]), Harbin Engineering University, China Lu Yunlong ([email protected]), Harbin Engineering University, China Zhang Keyong ([email protected]), Harbin Engineering University, China 12h00 9131 | EFFECT OF DIFFERENT SURFACE TREATMENT METHODS on PHYSICAL PROPERTIES of BANANA FIBERS KOCAK E.DILARA ([email protected]), Marmara University, Turkey MERDAN NIGAR ([email protected]), Istanbul Commerce University, Turkey MISTIK ILKER ([email protected]), Marmara University, Turkey AKALIN MEHMET ([email protected]), Marmara University, Turkey KAYAR MAHMUT ([email protected]), Marmara University, Turkey 12h20 9037 | Improving the Strength and Service Life of Jute/Epoxy Laminar Composites for Structural Applications Michael Pinto ([email protected]), UMass Dartmouth, United States America Vijaya Chlivendra ([email protected]), UMass Dartmouth, United States America Yong K. Kim ([email protected]), UMass Dartmouth, United States America Armand F. Lewis ([email protected]), UMass Dartmouth, United States America 12h40 8927 | Preliminary investigations on Sisal Fibre Reinforced Aluminium Laminates Vieira, Luciano MG ([email protected]), Federal University of Minas Gerais - UFMG, Brazil Santos, Julio C ([email protected]), Federal University of São João del Rei -UFSJ, Brazil Panzera, Tulio H ([email protected]), Federal University of São João del Rei -UFSJ, Brazil Rubio, Juan CC ([email protected]), Federal University of Minas Gerais - UFMG, Brazil Scarpa, Fabrizio ([email protected]), University of Bristol, United Kingdom Session 20.2 | Chairs: Campilho, Raul D.S.G. (ISEP, Portugal) 14h00 9030 | Effect of pressing parameters and chemical modifications of flax fabrics on microstructure and mechanical properties of natural fiber-reinforced composites Przybyszewski, Bartlomiej ([email protected]), Institute of Lightweight Engineering and Polymer Technology, Technische Universität Dresden, Germany Czulak, Andrzej ([email protected]), Institute of Lightweight Engineering and Polymer Technology, Technische Universität Dresden, Germany Gude, Maik ([email protected]), Institute of Lightweight Engineering and Polymer Technology, Technische Universität Dresden, Germany Lewandowska, Malgorzata ([email protected]), Faculty of Materials Science and Engineering, Warsaw University of Technology, Poland Broda, Piotr ([email protected]), Faculty of Materials Science and Engineering, Warsaw University of Technology, Poland 14h20 9018 | Effect of Alkali Treatment on the Thermal Stability of Alkali Treated Water Hyacinth/Multi-walled Carbon Nanotube/High Density Polyethylene Composite Wirawan, Riza ([email protected]), Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Jakarta, Indonesia Anggrainy, Rani ([email protected]), Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Jakarta, Indonesia Dwiyati, Siska T ([email protected]), Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Jakarta, Indonesia

54

14h40 8864 | Low impact behaviour of hemps fibre reinforced epoxy composites G. Caprino ([email protected]), University of Naples Federico II, Italy L. Carrino ([email protected]), University of Naples Federico II, Italy M. Durante ([email protected]), University of Naples Federico II, Italy A. Langella ([email protected]), University of Naples Federico II, Italy V. Lopresto ([email protected]), University of Naples Federico II, Italy 15h00 7712 | NUMERICAL STUDY OF THE BEHAVIOUR OF NATURAL FIBRES COMPOSITES UNDER LOW-VELOCITY IMPACT Rubio-López, Ángel ([email protected]), University Carlos III of Madrid, Spain Díaz-Álvarez, Antonio ([email protected]), University Carlos III of Madrid, Spain Olmedo, Álvaro ([email protected]), University Carlos III of Madrid, Spain Santiste, Carlos ([email protected]), University Carlos III of Madrid, Spain 15h20 8832 | A Study on the Structural Performance of Jute Fiber-Based Composite Tubes under Axial and Transverse Loadings Mache, Ashok ([email protected]), Indian Institute of Science, Bangalore & Vishwakarma Institute of Information Technology, Pune, India Deb, Anindya ([email protected]), Indian Institute of Science, Bangalore, India 15h40 9183 | SYNTHESIS OF MICROCELLULOSE (MCC) AND NANOCELLULOSE (NCC) FROM EUCALYPTUS KRAFT ssp PULP Zeni, M. ([email protected]), Caxias do Sul University, Brazil Grisa, A.M.C. ([email protected]), Caxias do Sul University, Brazil Favero, D. ([email protected]), Caxias do Sul University, Brazil Lanfredi, M. ([email protected]), Caxias do Sul University, Brazil Pacheco, K. ([email protected]), Caxias do Sul University, Brazil Session 20.3 | Chairs: Campilho, Raul D.S.G. (ISEP, Portugal) 16h30 7739 | ANALYSIS OF THE MANUFACTURING PARAMETERS ON THE MECHANICAL PROPERTIES OF NATURAL FIBRES COMPOSITES Rubio-López, Ángel ([email protected]), Department of Continuous Mechanics and Structures Theory, University Carlos III of Madrid, Spain Díaz-Álvarez, Antonio ([email protected]), Department of Mechanics, University Carlos III of Madrid, Spain Olmedo, Álvaro ([email protected]), Department of Continuous Mechanics and Structures Theory, University Carlos III of Madrid, Spain Santiuste, Carlos ([email protected]), Department of Continuous Mechanics and Structures Theory, University Carlos III of Madrid, Spain 16h50 7534 | FRACTURE PROPERTY DETERMINATION IN NATURAL FIBRE COMPOSITES Campilho, Raul D.S.G. ([email protected]), ISEP, Portugal Moura, Daniel C. ([email protected]), FEUP, Portugal 17h10 8811 | Bond behavior of flax-FRCM and PBO-FRCM composites applied on clay bricks: experimental and theoretical study Olivito R. ([email protected]), Civil Engineering Department - University of Calabria, Italy Codispoti R. ([email protected]), Civil Engineering Department - University of Calabria, Italy Cevallos O. ([email protected]), Civil Engineering Department - University of Calabria, Ecuador 17h30 8036 | Properties and evaluation of structural changes of thermoplastic polymer composites with renewable plant materials after accelerated weathering tests Barton-Pudlik Joanna ([email protected]), Opole University, Poland Czaja Krystyna ([email protected]), Opole University, Poland Sacher-Majewska Beata ([email protected]), Opole Univeristy, Poland Sobków Dariusz ([email protected]), Opole University, Poland

55

17h50 8669 | PRODUCTION OF CELLULOSE BASED BIOCOMPOSITES WITH HYDROXYAPATITE FOR MEDICAL APPLICATIONS Viana, Tânia ([email protected]), Polytechnic Institute of Leiria, Portugal Malça, Cândida ([email protected]), Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria and Polytechnic Institute of Coimbra, ISEC, Portugal Biscaia, Sara ([email protected]), Polytechnic Institute of Leiria, Portugal Mateua, Artur ([email protected]), Polytechnic Institute of Leiria, Portugal Mitchell, Geoffrey ([email protected]), Polytechnic Institute of Leiria, Portugal 18h10 9087 | SURFACE PROPERTIES OF PAPERS COATED WITH THE STYRENE-ACRYLATE BASED COPOLYMERS OZDEMIR ALP, Mehlika ([email protected]), Kocaeli University, Turkey OZDEMIR, Mehmet ([email protected]), Kocaeli University, Turkey AYTAC, Ayse ([email protected]), Kocaeli University, Turkey DENIZ, Veli ([email protected]), Kocaeli University, Turkey

Wednesday 17 June Room VITUS II

Session 21 – Non-destructive Inspection Techniques for Composite

Materials and Structures Session 21.1 | Chairs: Findeis, Dirk ([email protected]), University of Cape Town, Dept of Mech Eng, South Africa 11h00 7526 | A non-intrusive automated procedure based on active thermography for defect localization in plane composite. Perez, Laetitia ([email protected]), LTN, IUT, University of Nantes, France Lascoup, Bertrand ([email protected]), IRT Jules Verne, France Autrique, Laurent ([email protected]), LARIS, ISTIA, University of Angers, France 11h20 9077 | Thermographic Interpretation of Failure Mode in Polymer Matrix Composites Kim, Jeongguk ([email protected]), Korea Railroad Research Institute, Korea, South 11h40 8934 | APPLICATION OF ULTRASONIC GUIDED WAVES FOR DEFECT DETECTION IN HONEYCOMB Draudviliene, Lina ([email protected]), Kaunas University of Technology, Lithuania Raisutis, Renaldas ([email protected]), Kaunas University of Technology, Lithuania Zukauskas, Egidijus ([email protected]), Kaunas University of Technology, Lithuania 12h00 7633 | Non-destructive evaluation of satin woven fiber reinforced polymer matrix composites Montesano, John ([email protected]), Ryerson University, Canada Fawaz, Zouheir ([email protected]), Ryerson University, Canada Bougherara, Habiba ([email protected]), Ryerson University, Canada 12h20 7674 | Identification of dynamic stiffness distribution of fatigue loaded polymer concrete through vibration measurement Ahn, SangKeun ([email protected]), Hanyang University, Korea, South Jeon, Eunbeom ([email protected]), Hanyang University, Korea, South Park, Junhong ([email protected]), Hanyang University, Korea, South Kim, Hak-sung ([email protected]), Hanyang University, Korea, South Koh, Hyo-in ([email protected]), Korea Railroad Research Institute, Korea, South

56

12h40 7769 | Evaluation of residual strain field and temperature mapping in 3D printed layered polymer plates Kousiatza, Charoula ([email protected]), University of Piraeus, Greece Economidou, Sophia N. ([email protected]), University of Piraeus, Greece Karalekas, Dimitris ([email protected]), University of Piraeus, Greece Session 21.2 | Chairs: Findeis, Dirk ([email protected]), University of Cape Town, Dept of Mech Eng, South Africa 14h00 7781 | On the use of Laser-spot Thermography for the Nondestructive Inspection of Composites Evola, Pietro ([email protected]), University of Palermo, Italy, Italy Vandone, Ambra ([email protected]), Politecnico di Milano, Italy, Italy Rizzo, Piervincenzo ([email protected]), University of Pittsburgh, USA, United States America 14h20 7782 | Dispersion analysis of Lamb waves in composite laminates based on Reverberation-ray theory Ma, Zhaoyang ([email protected]), Peking University, China Chen, Jianlin ([email protected]), Peking University, China Zhou, Jie ([email protected]), Peking University, China Yi, Jianlin ([email protected]), Peking University, China Su, Xianyue ([email protected]), Peking University, China 14h40 7820 | Direct Estimation of the Elastic Constants of CFRP Plates by using Lagrange’s Equation Hartl, Stefan ([email protected]), Vienna University of Technology, Austria Schulz, Alexander ([email protected]), Vienna University of Technology, Austria Manfred, Kaltenbacher ([email protected]), Vienna University of Technology, Austria 15h00 7843 | Nondestructive evaluation technique of multiple-delaminations in glass fiber reinforced composites using terahertz spectroscopy Kim, Do-Hyoung ([email protected]), Hanyang University, Korea, South Ryu, Chung-Hyeon ([email protected]), Hanyang University, Korea, South Kim, Hak-Sung ([email protected]), Hanyang University, Korea, South 15h20 7917 | Spectromicroscopic characterization and magnetic properties of submicron Ni rod arrays in silicon dioxide matrix S.Yu. Turishchev ([email protected]), Voronezh State University, Russian Federation E.V. Parinova ([email protected]), Voronezh State University, Russian Federation R. Ovsyannikov ([email protected]), Helmholtz-Zentrum Berlin fu ̈r Materialien und Energie, Russian Federation E.A. Streltsov ([email protected]), Belarusian State University, Belarous A.K. Fedotov ([email protected]), Belarusian State University, Belarous E.P. Domashevskaya ([email protected]), Voronezh State University, Russian Federation 15h40 8060 | Using the Flexural Rigidity to Detect the Presence of Defects in Composite Sandwich Beams Findeis, Dirk ([email protected]), University of Cape Town, Dept of Mech Eng, South Africa Gryzagoridis, Jasson ([email protected]), University of Cape Town, Dept of Mech Eng, South Africa Session 21.3 | Chairs: Durão, L. M. P. (ISEP - Instituto Superior de Engenharia do Porto, Portugal) and Panzera, T. H. (Universidade Federal de São João Del Rei (UFSJ), Brazil) 16h30 8084 | DAMAGE ASSESSMENT OF HYBRID FIBRE REINFORCED LAMINATES Durão, L. M. P. ([email protected]), ISEP - Instituto Superior de Engenharia do Porto, Portugal Panzera, T. H. ([email protected]), Universidade Federal de São João Del Rei (UFSJ), Brazil Scarpa, F. ([email protected]), University of Bristol, United Kingdom Sergio, LMR Filho ([email protected]), Universidade Federal de São João Del Rei (UFSJ), Brazil Oliveira, P. R. ([email protected]), Universidade Federal de São João Del Rei (UFSJ), Brazil

57

16h50 8115 | LIFETIME OF FIBROUS CARBON/CERAMIC COMPOSITES SUBJECTED TO A CYCLIC LOAD Gumula, Teresa ([email protected]), AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Al. Mickiewicza 30, 30- 059 Krakow, Poland, Poland Martinez-Viviente, Felix L. ([email protected]), Universidad Politecnica de Cartagena, Departamento de Electronica y Tecnologia de Computadoras, 30202 Cartagena, Spain, Spain 17h10 8137 | Nondestructive evaluation of carbon fibre reinforced composites with infrared thermography and ultrasonics Meola, C. ([email protected]), University of Naples Federico II, Italy Carlomagno, G.M. ([email protected]), University of Naples Federico II, Italy Boccardi, S. ([email protected]), University of Naples Federico II, Italy Boffa, N.D. ([email protected]), University of Naples Federico II, Italy Ricci, F. ([email protected]), University of Naples Federico II, Italy 17h30 8365 | Probing the Characteristic Free-Volume, Void, and Elemental Composition within a Polyamide Composite Membrane by Age-Momentum Correlation Spectroscopy Hung, Wei-Song ([email protected]), Chung Yuan University, Department of Chemical, Taiwan De Guzman, Manuel ([email protected]), Chung Yuan University, Department of Chemical, Taiwan An, Quan-Fu ([email protected]), Zhejiang University, Department of Polymer Science &, China Hu, Chien-Chieh ([email protected]), Chung Yuan University, Department of Chemical, Taiwan Lee, Kueir-Rarn ([email protected]), Chung Yuan University, Department of Chemical, Taiwan Lai, Juin-Yih ([email protected]), Chung Yuan University, Department of Chemical, Taiwan 17h50 8648 | Analysis of damage mechanisms in drilling of composite materials by acoustic emission Zarif Karimi, Navid ([email protected]), University of Bologna, Italy Kianfar, Parnian ([email protected]), Amirkabir University of Technology, Iran Minak, Giangiacomo ([email protected]), University of Bologna, Italy 18h10 7916 | Edge-illumination X-ray dark-field imaging for imaging defects in composite structures Endrizzi, M. ([email protected]), University College London, United Kingdom Murat, B. I. S. ([email protected]), University College London, United Kingdom Fromme, P. ([email protected]), University College London, United Kingdom Olivo, A. ([email protected]), University College London, United Kingdom

Wednesday 17 June Room VITUS III

Session 22 – Optimization Techniques and Methods

Session 22.1 | Chairs: Liu Qimao ([email protected]), Aalto University, Finland 11h00 8986 | Lightweight design of composite plate and shell strusctures in vibration environments Liu Qimao ([email protected]), Aalto University, Finland 11h20 9146 | Optimizational Design and Analysis for Composite horizontal axis tidal turbine blades Tong Lili ([email protected]), Harbin Engineering University, China Chai Jun ([email protected]), Harbin Engineering University, China Tang Xiao ([email protected]), Harbin Engineering University, China Guo Yihong ([email protected]), Harbin Engineering University, China

58

11h40 8977 | Optimum design of shape and reinforcement of oval cut-out in fiber-reinforced composite laminates Yu, K ([email protected]), Peking University, China Wang, J ([email protected]), Peking University, China Tong, L ([email protected]), University of Sydney, Australia Wang, Y ([email protected]), Beijing Aeronautical Science and Technology Research Institute, China 12h00 9188 | Efficiency optimisation of composite hydrofoils and cavitation tunnel experiments Herath, Manudha T. ([email protected]), Univeristy of New South Wales, Australia Phillips, Andrew W. ([email protected]), Defence Science and Technology Organization, Australia St John, N. ([email protected]), Defence Science and Technology Organization, Australia Prusty, B. Gangadhara ([email protected]), Univeristy of New South Wales, Australia 12h20 9124 | SIMULTANEOUS SHAPE AND MATERIAL OPTIMIZATION OF SANDWICH PANELS WITH HONEYCOMB CORE FOR ADDITIVE MANUFACTURING Montemurro, Marco ([email protected]), Arts et Métiers ParisTech, I2M CNRS UMR 5295,, France Catapano, Anita ([email protected]), Université de Bordeaux, I2M CNRS UMR 5295,, France Doroszewski, Dominique ([email protected]), Arts et Métiers ParisTech, France 12h40 7648 | QUALITY ASSESSMENT OF 2D BRAIDED COMPOSITES WITH OPTICAL MEASUREMENT TECHNIQUES Heieck, Frieder ([email protected]), Institute of Aircraft Design, University of Stuttgart, Germany Fuhr, Jan-Philipp ([email protected]), Institute of Aircraft Design, University of Stuttgart, Germany Middendorf, Peter ([email protected]), Institute of Aircraft Design, University of Stuttgart, Germany Session 22.2 | Chairs: Montemurro, Marco ([email protected]), Catapano, Anita ([email protected]), France 14h00 7850 | Cast aluminium matrix composites modified with using plastic deformation process – changing of the structure and mechanical properties Kurtyka, Paweł ([email protected]), Institute of Technology, Pedagogical University of Krakow, Poland Ryłko, Natalia ([email protected]), Institute of Technology, Pedagogical University of Krakow, Poland Tokarski, Tomasz ([email protected]), Faculty of Non-Ferrous Metals,AGH University of Science and Technology, Poland Wójcicka, Anna ([email protected]), Institute of Technology, Pedagogical University of Krakow, Poland Pietras, Adam ([email protected]), Institute of Welding of Gliwice, Poland 14h20 7887 | Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design Lauter, Christian ([email protected]), University of Paderborn, Germany Wang, Zheng ([email protected]), University of Paderborn, Germany Troester, Thomas ([email protected]), University of Paderborn, Germany Brandis, Rinje ([email protected]), Krause-Biagosch GmbH, Germany Koechling, Daniel ([email protected]), Heinz Nixdorf Institut, University of Paderborn, Germany 14h40 7896 | Crashworthiness optimization of metal-composite energy absorption devices Díaz, Jacobo ([email protected]), Universidade da Coruña, Spain Romera, Luis ([email protected]), Universidade da Coruña, Spain Paz, Javier ([email protected]), Universidade da Coruña, Spain Costas, Miguel ([email protected]), Universidade da Coruña, Spain 15h00 7986 | An efficient semi-automated optimization algorithm for (lattice) composite structures: implementation and application Pavlov, Leonid ([email protected]), ATG Europe, Netherlands 15h20 8012 | Torsion induced buckling design of a variable stiffness composite cylinder made by fiber steering Rouhi, Mohammad ([email protected]), Concordia University, Canada Ghayoor, H. ([email protected]), Concordia University, Canada Hoa, Suong V. ([email protected]), Concordia University, Canada Hojjati, M. ([email protected]), Concordia University, Canada

59

15h40 8069 | THE INFLUENCE OF EXPANSIVE AGENTS ON THE PROPERTIES OF FIBER REINFORCED CEMENT-BASED COMPOSITES CORINALDESI, Valeria ([email protected]), Università Politecnica delle Marche, Ancona, Italy NARDINOCCHI, Alessandro ([email protected]), Università Politecnica delle Marche, Ancona, Italy Session 22.3 | Chairs: Parker, Sa-aadat ([email protected]), Stellenbosch University, South Africa and Trias, Daniel ([email protected]), Universitat de Girona, Spain 16h30 8286 | Influence of SiC particles on tribological properties in aluminum based composites Susniak, Magdalena ([email protected]), AGH University of Science and Technology, Poland Karwan-Baczewska, Joanna ([email protected]), AGH University of Science and Technology, Poland 16h50 8581 | Experimental study and validation of computational optimised, endless fibre reinforced thermoplastic parts Rettenwander, Thomas ([email protected]), Institute for Injection Molding and Process automation, JKU Linz, Austria Fischlschweiger, Michael ([email protected]), Center for Lightweigth Composite Technologies, Engel Austria, Austria Steinbichler, Georg ([email protected]), Institute for Injection Molding and Process automation, JKU Linz, Austria 17h10 8733 | Simultaneous Analysis and Design of Composite Structures Parker, Sa-aadat ([email protected]), Stellenbosch University, South Africa Groenwold, Albert A. ([email protected]), Stellenbosch University, South Africa 17h30 8747 | Systematic search for optimums using a methodical ap-proach coupled with genetic algorithm Ngahane Nana, Liliane G. ([email protected]), Chair and Institut for engineering Design , Germany Thomas, Fieder ([email protected]), Chair and Institut for engineering Design , Germany Stephanie, Dallmeier ([email protected]), Chair and Institut for engineering Design , Germany Jonathan, Schmidt ([email protected]), Chair and Institut for engineering Design , Germany Anna-Lena, Beger ([email protected]), Chair and Institut for engineering Design , Germany Zhuzhell, Montano ([email protected]), Chair and Institut for engineering Design , Germany Jörg, Feldhusen ([email protected]), Chair and Institut for engineering Design , Germany 17h50 8572 | Maximization of the fundamental frequency of composite plates and cylinders using genetic algorithms Trias, Daniel ([email protected]), Universitat de Girona, Spain Maimí, Pere ([email protected]), Universitat de Girona, Spain Blanco, Norbert ([email protected]), Universitat de Girona, Spain 18h10 9336 | Optimal and robust design of glass and carbon fibre reinforced hybrid composites under flexural loading Mehdi Kalantari ([email protected]), Curtin University, Australia Chensong Dong ([email protected]), Curtin University, Australia Ian J. Davies ([email protected]), Curtin University, Australia 18h30 9470 | An advantageous technique for the optimal reinforcement design Baratta Alessandro ([email protected]), University of Naples "Federico II", Italy Corbi Ileana ([email protected]), University of Naples "Federico II", Italy Corbi Ottavia ([email protected]), University of Naples "Federico II", Italy

60

Wednesday 17 June Room VITUS IV

Session 23 – Finite elements

Session 23.1 | Chairs: Kubiak Tomasz (Lodz University of Technology, Poland) 11h00 9215 | FE formulation for a generalized quasi-3D layerwise HSDT for beams J.A. Yarasca ([email protected]), National University of Engineering, Peru J.L. Mantari ([email protected]), Univestity of Enginering and Technology, Peru 11h20 6845 | Damage growth characteristics in composite glass-epoxy plate by Vibration analysis Chellil A. ([email protected]), Motor dynamic and vibroacoustic laboratory, University of Boumerdès,.Algeria., Algeria Nour A. ([email protected]), Motor dynamic and vibroacoustic laboratory, University of Boumerdès,.Algeria., Algeria Lecheb S. ([email protected]), Motor dynamic and vibroacoustic laboratory, University of Boumerdès,.Algeria Kebir H. ([email protected]), Laboratoire Roberval, Université de Technologie de Compiègne, UTC, France., Algeria Mechakra H. ([email protected]), Motor dynamic and vibroacoustic laboratory, University of Boumerdès,.Algeria 11h40 9465 | A finite element formulation for viscoplasticity De Angelis, Fabio ([email protected]), Dept of Structures for Engineering and Architecture, University of Naples Federico II, Italy 12h00 7837 | Modelling of beam – column composite joints at elevated temperature Al-Jabri, Khalifa S. ([email protected]), Sultan Qaboos University, Oman Pillay, Prashob ([email protected]), Sultan Qaboos University, Oman Waris, Muhammad B. ([email protected]), Sultan Qaboos University, Oman Pervez, Tasneem ([email protected]), Sultan Qaboos University, Oman 12h20 9119 | Aero-elastic analysis of composite plate swept wings using the finite element method Mahran, Mohamed A. ([email protected]), Cairo University, Egypt Negm, Hani ([email protected]), Cairo University, Egypt El-Sabbagh, Adel ([email protected]), Ain Shams University, Egypt Maalawi, Karam ([email protected]), National Research Center, Egypt 12h40 7926 | An approach based on the variable separation for finite element modeling of free edge effect for composite plates Vidal P. ([email protected]), University Paris Ouest, France Gallimard L. ([email protected]), University Paris Ouest, France Polit O. ([email protected]), University Paris Ouest, France Session 23.2 | Chairs: Kubiak Tomasz (Lodz University of Technology, Poland) 14h00 9121 | Finite element formulation for stiffened structures JL Mantari ([email protected]), Univestity of Enginering and Technology, Peru 14h20 9045 | FEM modeling cermet coatings post-treatment by pulsed high-concentrated energy fluxes Solonenko, Oleg ([email protected]), Khristianovich Institute of Theoretical and Applied Mechanics, SB RAS, Novosibirsk, Russian Federation Golovin, Alexey ([email protected]), Khristianovich Institute of Theoretical and Applied Mechanics, SB RAS, Novosibirsk, Russian Federation

61

14h40 8999 | A multi-linear material based FEM for nonlinear analysis of steel-reinforced glulam timber De Luca, Vincenzo ([email protected]), Università degli Studi della Basilicata, DIS, Viale dell’Ateneo Lucano 10, Potenza, Italy, Italy Marano, Cosimo ([email protected]), Università degli Studi della Basilicata, SAFA, Viale dell’Ateneo Lucano 10, Potenza, Italy, Italy 15h00 8924 | Finite element analysis and study for the mechanical property predictions of Fiber Metal Laminates Qi-Gang Han ([email protected]), Jilin University, China Qing-Chu Ban ([email protected]), Jilin University, China Wen-Ke Yang ([email protected]), Jilin University, China Ji-Lun Zhong ([email protected]), Jilin University, China Meng-Lu Chen ([email protected]), Jilin University, China Zheng Yi ([email protected]), Jilin University, China 15h20 7576 | Evaluation of structural integrity of Type III hydrogen pressure vessel under impact loading by using finite element analysis Han, Min-Gu ([email protected]), Chung-Ang University, Korea, South Chang, Seung-Hwan ([email protected]), Chung-Ang University, Korea, South 15h40 7837 | Modelling of beam – column composite joints at elevated temperature Al-Jabri, Khalifa S. ([email protected]), Sultan Qaboos University, Oman Pillay, Prashob ([email protected]), Sultan Qaboos University, Oman Waris, Muhammad B. ([email protected]), Sultan Qaboos University, Oman Pervez, Tasneem ([email protected]), Sultan Qaboos University, Oman Session 23.3 | Chairs: Kubiak Tomasz (Lodz University of Technology, Poland) 16h30 7935 | Structural analysis of composites under manufacturing constraints Mayer Natalie ([email protected]), Technische Universität Mu ̈nchen, Faculty of Mechanical Engineering, Germany Klaus Drechsler ([email protected]), Technische Universität Mu ̈nchen, Germany Roland Hinterhölzl ([email protected]), Technische Universität Mu ̈nchen, Germany Tamas Havar ([email protected]), AIRBUS Group Innovations, Munich, Germany Jens Prowe ([email protected]), AIRBUS Group Innovations, Munich, Germany 16h50 7959 | A C^0-continuous RZT beam element for the damped response of laminated structures Treviso, Alessandra ([email protected]), Univesity of Calabria/ Siemens Industry Software nv, Italy Mundo, Domenico ([email protected]), Univesity of Calabria, Italy Tournour, Michel ([email protected]), Siemens Industry Software nv, Belgium 17h10 8263 | MPFEM simulation on the 2D compaction of binary Al/SiC particulate composites Huang, Fen ([email protected]), School of Materials and Metallurgy, Northeastern University, China An, Xizhong ([email protected]), School of Materials and Metallurgy, Northeastern University, China 17h30 8709 | Design of a composite bucket seat used in automobiles Jung Woo Noh ([email protected]), Korea Institute of Industrial Technology, Korea, South Song Hee Han ([email protected]), Chonbuk National University, Korea, South Ki Young Kim ([email protected]), Korea Institute of Industrial Technology, Korea, South Seong Su Kim ([email protected]), Chonbuk National University, Korea, South 17h50 8222 | Simplified Seismic Evaluation Method for Steel Members with Thin-walled Stiffened Box Sections Zhang Jiandong ([email protected]), Jiangsu Transportation Research Institute, China

62

18h10 8553 | Hybrid epoxy/carbon fibre composites containing nano/micro silica particles Santos, Júlio C. ([email protected]), Federal University of Sao Joao del Rei - UFSJ, Brazil Vieira, Luciano M.G. ([email protected]), Federal University of Sao Joao del Rei - UFSJ, Brazil Panzera, Túlio H . ([email protected]), Federal University of Sao Joao del Rei - UFSJ, Brazil Schiavon, Marco A. ([email protected]), Federal University of Sao Joao del Rei - UFSJ, Brazil Christoforo, André L. ([email protected]), Federal University of São Paulo - UFScar, Brazil Scarpa, F. ([email protected]), Federal University of Bristol, United Kingdom

Wednesday 17 June Room Morus II

Session 24 – Buckling problems

Session 24.1 | Chairs: Mauricio Caliri (University of São Paulo, Brazil) and Dozio, Lorenzo ([email protected]), Politecnico di Milano, Italy 11h00 9193 | Unilateral contact buckling of stiffened rectangular plate under non-uniform compression Zhang, Ning ([email protected]), College of Water Resources and Architectural Engineering, Northwest A�F University, China Liu, Yong J. ([email protected]), Bridge Engineering Institute, Chang’an University, China Li, Hui ([email protected]), Bridge Engineering Institute, Chang’an University, China 11h20 9166 | Refined Buckling Analysis of Composite Plates Under Various Boundary Conditions Dozio, Lorenzo ([email protected]), Politecnico di Milano, Italy Vescovini, Riccardo ([email protected]), Politecnico di Milano, Italy 11h40 9049 | A NEW FOURIER−RELATED DOUBLE SCALE ANALYSIS FOR WRINKLING ANALYSIS OF THIN FILMS ON COMPLIANT SUBSTRATES Qun Huang ([email protected]), Wuhan University, China Jie Yang ([email protected]), Wuhan University, China Wei Huang ([email protected]), Wuhan University, China Heng Hu ([email protected]), Wuhan University, China Gaetano Giunta ([email protected]), Centre de Recherche Public Henri Tudor, Luxembourg Salim Belouettar ([email protected]), Centre de Recherche Public Henri Tudor, Luxembourg 12h00 8949 | NUMERICAL EVALUATION OF THE LOCAL BUCKLING MOMENT FOR PULTRUDED FRP BEAMS Ascione, Francesco ([email protected]), University of Salerno, Italy Feo, Luciano ([email protected]), University of Salerno, Italy Minghini, Fabio ([email protected]), University of Ferrara, Italy Tullini, Nerio ([email protected]), University of Ferrara, Italy 12h20 7058 | Numerical and experimental investigation of post-buckling behavior of square cross-section composite tubes Czapski, Pawel ([email protected]), Lodz University of Technology, Poland Kubiak, Tomasz ([email protected]), Lodz University of Technology, Poland Urbaniak, Mariusz ([email protected]), Lodz University of Technology, Poland 12h40 7096 | Influence of boundary conditions on the behavior of composite channel-section columns under compression Urbaniak, Mariusz ([email protected]), Lodz University of Technology, Poland Teter, Andrzej ([email protected]), Lublin University of Technology, Poland Kubiak, Tomasz ([email protected]), Lodz University of Technology, Poland

63

Session 24.2 | Chairs: and Mauricio Caliri (University of São Paulo, Brazil) and Lanc, Domagoj ([email protected]), Faculty of Engineering, University of Rijeka, Croatia 14h00 7601 | Design formulae for buckling of Built-in-Free and Rotationally Restrained-Free Orthotropic plates Javier Giménez Vila ([email protected]), IE University, Spain 14h20 7681 | Effect of edge reinforcement and low-speed impact damage on the buckling stability of composite I-section beam loaded in shear Gao Weicheng ([email protected]), Harbin Institute of Technology, China Zhang Jian ([email protected]), Harbin Institute of Technology, China 14h40 7732 | Buckling performance of composite cylindrical shells subjected to axial compression loads Wu Pengfei ([email protected]), School of Aeronautics Science and Engineering, Beihang University, China Cheng Xiaoquan ([email protected]), School of Aeronautics Science and Engineering, Beihang University, China Fan Zhou ([email protected]), Beijing Institute of Space Long March Vehicle, China 15h00 7741 | A Laminated Shell Model for Buckling Analysis of Laminated Glass Structures Liang, Yating ([email protected]), Imperial College London, United Kingdom Lancaster, Franklin ([email protected]), Eckersley O’Callaghan, United States America Izzuddin, Bassam A. ([email protected]), Imperial College London, United Kingdom 15h20 7783 | A beam formulation for nonlinear stability analysis of semi-rigid composite frames Turkalj, G. ([email protected]), University of Rijeka, Faculty of Engineering, Croatia Lanc, D. ([email protected]), University of Rijeka, Faculty of Engineering, Croatia Pešić, I. ([email protected]), University of Rijeka, Faculty of Engineering, Croatia Brnić, J. ([email protected]), University of Rijeka, Faculty of Engineering, Croatia 15h40 7860 | Nonlinear buckling analysis of thin-walled laminated composite beams with monosymmetric sections Lanc, Domagoj ([email protected]), Faculty of Engineering, University of Rijeka, Croatia Turkalj, Goran ([email protected]), Faculty of Engineering, University of Rijeka, Croatia Vo, Thuc P. ([email protected]), Faculty of Engineering and Environment, Northumbria University, Newcastle upon Tyne, United Kingdom Pesic, Igor ([email protected]), Faculty of Engineering, University of Rijeka, Croatia Session 24.3 | Chairs: Mauricio Caliri (University of São Paulo, Brazil) and Oktem, Ahmet S. ([email protected]), Gebze Technical University, Turkey 16h30 8041 | FRP Shear Strengthening for the Web Panels of Steel Plate Girders Al-Azzawi, Zaid M. K. ([email protected]), School of Engineering, The University of Edinburgh, United Kingdom Stratford, Tim ([email protected]), School of Engineering, The University of Edinburgh, United Kingdom Rotter, Michael ([email protected]), School of Engineering, The University of Edinburgh, United Kingdom Bisby, Luke ([email protected]), School of Engineering, The University of Edinburgh, United Kingdom 16h50 8054 | Semi-analytical panel buckling of cylindrical composite grid-stiffened structures comprising discrete stiffener formulations Weber, Markus J. ([email protected]), Airbus Group Innovations, Germany Middendorf, Peter ([email protected]), University of Stuttgart, Institute of Aircraft Design (IFB), Germany 17h10 7991 | Imperfection sensitivity analysis of laminated folded plates using Koiter’s asymptotic approach Barbero Ever J. ([email protected]), West Virginia University, Morgantown, WV, USA, United States America Madeo Antonio ([email protected]), DIMES, University of Calabria, Italy Zagari Giuseppe ([email protected]), DIMES, University of Calabria, Italy Zinno Raffaele ([email protected]), DIMES, University of Calabria Italy Zucco Giovanni ([email protected]), DIMES, University of Calabria, Italy

64

17h30 9232 | Thermal Buckling of Empty Closed Cylindrical Nano-Tube Viruses under External Pressure Karasoy, Taner ([email protected]), Gebze Technical University, Turkey Oktem, Ahmet S. ([email protected]), Gebze Technical University, Turkey 17h50 9129 | Characterisation of composite mesoporous membranes using nitrogen isothermal measurements Shehu, Habiba ([email protected]), Robert Gordon University, United Kingdom Okon, Edidiong ([email protected]), Robert Gordon University, United Kingdom Gobina, Edward ([email protected]), Robert Gordon University, United Kingdom

Wednesday 17 June Room QUERCUS

Session 26 – Thermal problems on Composite structures

Session 26.1 | Chairs: Nowak, Tomasz ([email protected]), ABB Corporate Research, Poland and JL Mantari ([email protected]), Univestity of Enginering and Technology, Peru 11h00 9199 | The Effect of Temperature on Mechanical Properties of Carbon/Epoxy Composites Im, Jae-Moon ([email protected]), Hanbat National University, Mechanical Design Engineering, Korea, South Shin, Kwang-Bok ([email protected]), Hanbat National University, Mechanical Engineering, Korea, South Hwang, Tae-Kyung ([email protected]), Agency for Defense Development, Korea, South 11h20 9044 | Evolution of ultra-fine TiC-inclusions in TiC-NiCr cermet powders synthesized at different volume content of binder and high-energy impacts Solonenko, Oleg ([email protected]), Khristianovich Institute of Theoretical and Applied Mechanics, Russian Federation Ovcharenko, Vladimir ([email protected]), Institute of Strength Physics and Material Science, Siberian Branch of RAS, Tomsk, Russian Federation Chesnokov, Anton ([email protected]), Khristianovich Institute of Theoretical and Applied Mechanics, SB RAS, Novosibirs, Russian Federation 11h40 6344 | Thermally Conductive Polymer Composites with Continuous Cu Thermal Dissipation Pathway Yu, Seunggun ([email protected]), Korea Institute of Science and Technology, Korea, South Koo, Chong Min ([email protected]), Korea Institute of Science and Technology, Korea, South 12h00 8662 | Influence of different type of carbon filler on structure, mechanical and thermal properties of rigid polyurethane foam Ciecierska, Ewelina ([email protected]), Warsaw University of Technology, Poland Jurczyk-Kowalska, Magdalena ([email protected]), Warsaw University of Technology, Poland Bazarnik, Piotr ([email protected]), Warsaw University of Technology, Poland Gloc, Michał ([email protected]), Warsaw University of Technology, Poland Kowalski, Maciej ([email protected]), Transport Vehicles Upholstery Manufacturer TAPS - Maciej Kowalski, Poland Krauze, Sławomir ([email protected]), Transport Vehicles Upholstery Manufacturer TAPS - Maciej Kowalski, Poland Lewandowska, Małgorzata ([email protected]), Warsaw University of Technology, Poland

65

Session 26.2 | Chairs: Nowak, Tomasz ([email protected]), ABB Corporate Research, Poland and JL Mantari ([email protected]), Univestity of Enginering and Technology, Peru 14h00 7569 | Thermomechanical behavior of aeronautical structural carbon epoxy composite submitted to a laser irradiation Lacroix, Fabrice ([email protected]), ISL, France Allheily, Vadim ([email protected]), ISL, France Diener, Karsten ([email protected]), ISL, France Eichhorn, Alfred ([email protected]), ISL, France Gillet, Mathieu ([email protected]), DGA/DT/TA/MT/MTO, France L''Hostis, Gildas ([email protected]), UHA, laboratoire LPMT, France 14h20 8112 | Thermo-mechanical behavior of thick-walled laminated tubes used in High Voltage applications Nowak, Tomasz ([email protected]), ABB Corporate Research, Poland Juszkiewicz, Grzegorz ([email protected]), ABB Corporate Research, Poland 14h40 8123 | A new HSDT for the thermoelastic bending analysis of laminated plates JL Mantari ([email protected]), Univestity of Enginering and Technology, Peru M Oré ([email protected]), National University of Engineering, Peru 15h00 8125 | Comparative study on thin and thick walled cylinder models subjected to thermo-mechanical loading Juszkiewicz, Grzegorz ([email protected]), ABB Corporate Research, Poland Nowak, Tomasz ([email protected]), ABB Corporate Research, Poland 15h20 8126 | A new quasi-3D HSDT for the thermoelastic bending analysis of laminated plates M Ore ([email protected]), National University of Engineering, Peru JL Mantari ([email protected]), Univestity of Enginering and Technology, Peru 15h40 8207 | High temperature effect on impact behavior of sandwich wall boards with GFRP face sheets and a foam-web core Wang, Lu ([email protected]), College of Civil Engineering, Nanjing Tech University, China Liu, Weiqing ([email protected]), College of Civil Engineering, Nanjing Tech University, China Session 26.3 | Chairs: TÜZÜN, F.Nihal ([email protected]), Hitit University, Turkey and JL Mantari ([email protected]), Univestity of Enginering and Technology, Peru 16h30 8551 | DETERMINATION OF OPTIMUM INSULATION THICKNESS IN BUILDINGS WITH USING DIFFERENT TYPES OF INSULATION MATERIALS IN ÇORUM CITY KARAKOÇ, Volkan Ramis ([email protected]), Hitit University, Turkey TÜZÜN, F.Nihal ([email protected]), Hitit University, Turkey 16h50 8604 | THERMO-VISCOELASTIC ANALYSIS OF GLARE Abouhamzeh, Morteza ([email protected]), Delft University of Technology, Netherlands Sinke, Jos ([email protected]), Delft University of Technology, Netherlands Benedictus, Rinze ([email protected]), Delft University of Technology, Netherlands 17h10 8618 | The Sound Absorption and Thermal Insulation of Fiber-Reinforced Thermoplastic Composites Gliscinska, Eulalia ([email protected]), Lodz University of Technology, Department of Material and Commodity Sciences and Textile Metrology, Poland Michalak, Marina ([email protected]), Department of Material and Commodity Sciences and Textile Metrology, Poland Krucinska, Izabella ([email protected]), Department of Material and Commodity Sciences and Textile Metrology, Poland

66

17h30 8635 | Application of Kubelka-Munk-Theory in the heating process of thermoplastic polymer matrix composites Luca Murenu ([email protected]), 1Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University, Altenbergerstrasse 69, 4020 Linz, Austria, Austria Fischlschweiger Michael ([email protected]), Center for Lightweight Composite Technologies, ENGEL AUSTRIA GmbH, Steyrerstrasse 20, 4300 St. Valentin, Austria, Austria Steinbichler Georg ([email protected]), 1Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University, Altenbergerstrasse 69, 4020 Linz, Austria, Austria

Wednesday 17 June Room OLIVA

Session 29 - Experimental Methods

Session 29.1 | Chairs: Luciano, Raimondo (University of Cassino, Italy) and Strozzi, Matteo (Università di Modena e Reggio Emilia, Italy) 11h00 7758 | Application of resorbable PGF/PLA composite for orthopedic implants: In vitro characterization of mechanical properties Hassan ([email protected]), Chung-Ang University, Korea, South Kyung-Chae ([email protected]), Chung-Ang University, Korea, South Min-Gu ([email protected]), Chung-Ang University, Korea, South Seung-Hwan ([email protected]), Chung-Ang University, Korea, South 11h20 7815 | Flexural behaviour of unidirectional composite laminates with different tensile and compressive strength Martínez Vicente, J.L. ([email protected]), University of Castilla-La Mancha, Spain Serna Moreno, M.C. ([email protected]), University of Castilla-La Mancha, Spain Romero Gutiérrez, A. ([email protected]), University of Castilla-La Mancha, Spain 11h40 7841 | Microstructure and Mechanical Properties of Magnesium based Composites produced by SPS sintering Mondet, Mathieu ([email protected]), French-German Research Institute of Saint-Louis (ISL), France Barraud, Elodie ([email protected]), French-German Research Institute of Saint-Louis (ISL), France Lemonnier, Sébastien ([email protected]), French-German Research Institute of Saint-Louis (ISL), France Allain-Bonasso, Nathalie ([email protected]), Laboratoire d''Etude des Microstructures et de Mécanique des Matériaux (LEM3), France Grosdidier, Thierry ([email protected]), Laboratoire d''Etude des Microstructures et de Mécanique des Matériaux (LEM3), France 12h00 8138 | Infrared thermography to evaluate thermoplastic composites under bending load Meola, C. ([email protected]), University of Naples Federico II, Italy Carlomagno, G.M. ([email protected]), University of Naples Federico II, Italy Boccardi, S. ([email protected]), University of Naples Federico II, Italy Simeoli, G. ([email protected]), University of Naples Federico II, Italy Acierno, D. ([email protected]), University of Naples Federico II,Italy Russo, P. ([email protected]), National Council of Research, Italy 12h20 8600 | Bond behavior of cement matrix-based composites for strengthening of masonry structures Alecci, Valerio ([email protected]), University of Florence, Italy De Stefano, Mario ([email protected]), University of Florence, Italy Luciano, Raimondo ([email protected]), University of Cassino, Italy Rovero, Luisa ([email protected]), University of Florence, Italy Stipo, Gianfranco ([email protected]), University of Florence, Italy

67

12h40 8763 | experimental study on nonlinear dynamics of circular cylindrical shell Zippo, Antonio ([email protected]), Università di Modena e Reggio Emilia, Italy Pellicano, Francesco ([email protected]), Università di Modena e Reggio Emilia, Italy Barbieri, Marco ([email protected]), Università di Modena e Reggio Emilia, Italy Strozzi, Matteo ([email protected]), Università di Modena e Reggio Emilia, Italy Session 29.2 | Chairs: Rui de Oliveira (BASF SE, Germany) and Schubert, Dirk W, (Friedrich-Alexander University Erlangen-Nuremberg, Germany) 14h00 (Keynote) 9217 | Mechanical characterization of continuous fiber reinforced thermoplastic composites: Challenges and recommendations Rui de Oliveira ([email protected]), BASF SE, Germany Henrik Schmidt ([email protected]), BASF SE, Germany Sebastian Allinger ([email protected]), BASF SE, Germany Martin Rheinfurth ([email protected]), BASF SE, Germany Adam Jaszkiewicz ([email protected]), BASF SE, Germany 14h40 9227 | Fast fabrication method and evaluation of performance of Hybrid FRTPs for applying them to automotive structural members Ben Goichi ([email protected]), Nihon University, Japan Sakata,Kazuhiro ([email protected]), Nihon University, Japan 15h00 7721 | Bond Properties of Arch-type Steel Fibre-reinforced Cementitious Composites Lee, Jae-Ho ([email protected]), Konkuk University, Korea, South Lee, Su-Jin ([email protected]), Konkuk University, Korea, South Won, Jong-Pil ([email protected]), Konkuk University, Korea, South 15h20 8886 | Influence of the pressure dependent contact area between electrode and composite surface on the electrical conductivity- novel approach to eliminate imperfect contacts in the testing procedure Liu, Xianhu ([email protected]), Friedrich-Alexander University Erlangen-Nuremberg, Germany Schubert, Dirk W, ([email protected]), Friedrich-Alexander University Erlangen-Nuremberg, Germany 15h40 7539 | Traction-compression biaxial testing for shear failure determination of a chopped glass reinforced polyester Serna Moreno, M.C. ([email protected]), University of Castilla-La Mancha, Spain Martínez Vicente, J.L. ([email protected]), University of Castilla-La Mancha, Spain López Cela, J.J. ([email protected]), University of Castilla-La Mancha, Spain Session General | Chairs: G. Belingardi ([email protected]), Politecnico Di Torino, Italy and HAMADA, H ([email protected]), Kyoto Institute of Technology, Japan 16h30 8991 | Shake-table tests and numerical simulation of plastered masonry-infilled steel frames with openings Baloevic, Goran ([email protected]), University of Split, Croatia Radnic, Jure ([email protected]), University of Split, Croatia Grgic, Nikola ([email protected]), University of Split, Croatia Matesan, Domagoj ([email protected]), University of Split, Croatia 16h50 7048 | Semi Impregnated Micro-Sandwich structures - SIMS - investigation on impact behaviour and damaging process G. Belingardi ([email protected]), Politecnico Di Torino, Italy B. Alem ([email protected]), Politecnico Di Torino, Italy J.Ji ([email protected]), Politecnico Di Torino, Italy Brunetto M. ([email protected]), Centro Ricerche FIAT, Italy

68

17h10 7672 | Crashworthiness of Carbon/Aramid fiber filament winding composite tube MA, Y ([email protected]), Kyoto Institute of Technology, Japan ZHANG, QJ ([email protected]), Donghua University, China XU, J ([email protected]), Donghua University, China SUGAHARA, T ([email protected]), Kyoto Institute of Technology, Japan YANG, YQ ([email protected]), Donghua University, China HAMADA, H ([email protected]), Kyoto Institute of Technology, Japan 17h30 7706 | Failure modelling of braided frames under bending loads Sturm, Ralf ([email protected]), German Aerospace Center, Germany Heieck, Frieder ([email protected]), University of Stuttgart, Germany 17h50 8068 | Deep Drawing of Low Density Sandwich Laminates Harhash, Mohamed ([email protected]), TU Clausthal, Germany Palkowski, Heinz ([email protected]), TU Clausthal, Germany

Wednesday 17 June Room CASTANEA

Session 30 - Porous and cellular materials

Session 30.1 | Chairs: H. Mata ([email protected]), INEGI - Faculty of Engineering, University of Porto, Portugal and Xu, Hang ([email protected]), McGill University, Canada 11h00 6712 | Porous piezoelectric ceramics Eichhorn, Franziska ([email protected]), University of Erlangen-Nu ̈rnberg, Germany 11h20 6905 | Influence of composition, strain rate and temperature on mechanical properties of novel 16Cr7Mn6Ni-TRIP-matrix composite 196 cpsi honeycomb structures under compressive deformation Baumgart, Christine ([email protected]), TU Bergakademie Freiberg, Germany Ehinger, David ([email protected]), TU Bergakademie Freiberg, Germany Kru ̈ger, Lutz ([email protected]), TU Bergakademie Freiberg, Germany 11h40 9180 | Experimental Evaluation of Behavior of a Sandwich Structure With Metal Foam Core by Penetration of Spherical Punch H. Mata ([email protected]), INEGI - Faculty of Engineering, University of Porto, Portugal R. Natal Jorge ([email protected]), DEMec - Faculty of Engineering, University of Porto, Portugal A. D. Santos ([email protected]), INEGI - Faculty of Engineering, University of Porto, Portugal M. P. L. Parente ([email protected]), INEGI - Faculty of Engineering, University of Porto, Portugal R. A. F Valente ([email protected]), Department of Mechanical Engineering, University of Aveiro, Portugal A. A. Fernandes ([email protected]), DEMec - Faculty of Engineering, University of Porto, Portugal 12h00 9174 | Effect of micropore clustering on mechanical properties of sintered porous metals Cho, Yi Je ([email protected]), Pusan National University, Korea, South Son, Yong Guk ([email protected]), Pusan National University, Korea, South Bae, Ki Chang ([email protected]), Pusan National University, Korea, South Oak, Jeong-Jung ([email protected]), Pusan National University, Korea, South Park, Yong Ho ([email protected]), Pusan National University, Korea, South

69

12h20 9155 | BI-MATERIAL LATTICE WITH HIGH STIFFNESS AND STRENGTH FOR LOW THERMAL EXPANSION Xu, Hang ([email protected]), McGill University, Canada Pasini, Damiano ([email protected]), McGill University, Canada 12h40 9015 | Sound absorption using composite layered medium for noise control Kim, Bo seung ([email protected]), Department of Mechanical Convergence Engineering, Hanyang University, Korea, South Cho, Sung jin ([email protected]), Department of Mechanical Engineering, Hanyang University, Korea, South Min, Dong ki ([email protected]), Department of Mechanical Engineering, Hanyang University, Korea, South Park, Jun hong ([email protected]), Department of Mechanical Convergence Engineering, Hanyang University, Korea, South Session 30.2 | Chairs: Della, Christian N. ([email protected]), University of Glasgow, United Kingdom And Duarte, I. ([email protected]), Department of Mechanical Engineering, TEMA, University of Aveiro, Portugal 14h00 7767 | Effect of interlayer on the effective performance of piezoelectric composites with porous matrix Della, Christian N. ([email protected]), University of Glasgow, United Kingdom Eng, Li Qiang ([email protected]), University of Glasgow, United Kingdom Shu, Dong Wei ([email protected]), Nanyang Technological University, Singapore 14h20 7833 | POLYURETHANE FOAM LOCLLY REINFORCED WITH FIBERS FOR CRYOGENIC APPLICATION Young Ho Yu ([email protected]), KAIST, Korea, South Soohyun Nam ([email protected]), KAIST, Korea, South Dai Gil Lee ([email protected]), KAIST, Korea, South 14h40 7882 | Organic-inorganic hybrid aerogels as composite materials for the emerging applications Zielecka Maria ([email protected]), Industrial Chemistry Research Institute, Poland Legocka Izabella ([email protected]), Industrial Chemistry Research Institute, Poland Bujnowska Elżbieta ([email protected]), Industrial Chemistry Research Institute, Poland Suwała Katarzyna ([email protected]), Industrial Chemistry Research Institute, Poland Wenda Magdalena ([email protected]), Industrial Chemistry Research Institute, Poland 15h00 7909 | Performance evaluation of APM (Advanced Pore Morphology) foam filled tubes Duarte, I. ([email protected]), Department of Mechanical Engineering, TEMA, University of Aveiro, Portugal Vesenjak, M. ([email protected]), Faculty of Mechanical Engineering, University of Maribor, Slovenia Krstulović-Opara, L. ([email protected]), Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, University of Split, Croatia Ren, Z. ([email protected]), Faculty of Mechanical Engineering, University of Maribor, Slovenia 15h20 9028 | Rapid Rotomolding of Integral Skin Celullar Polymeric Composites Pop-Iliev, Remon ([email protected]), UOIT-University of Ontario Institute of Technology, Canada 15h40 8098 | On the mechanical characterization of Spruce and Beech material parameters under impact loading. Wouts, Jérémy ([email protected]), Laboratory LAMIH, University of Valenciennes / TN International, France Houillon, Marie ([email protected]), TN International, France Coutellier, Daniel ([email protected]), Laboratory LAMIH, University of Valenciennes, France Oudjene, Marc ([email protected]), Laboratory LAMIH, University of Valenciennes LERMAB, University of Lorraine, France Haugou, Grégory ([email protected]), Laboratory LAMIH, University of Valenciennes, France Rahmoun, Jamila ([email protected]), Laboratory LAMIH, University of Valenciennes, France Naceur, Hakim ([email protected]), Laboratory LAMIH, University of Valenciennes, France

70

Session 30.3 | Chairs: : Della, Christian N. ([email protected]), University of Glasgow, United Kingdom And Duarte, I. ([email protected]), Department of Mechanical Engineering, TEMA, University of Aveiro, Portugal 16h30 8245 | Acoustic Luneburg lens as Sonar KIm, Sang-Hoon ([email protected]), Mokpo National Maritime University, Korea, South 16h50 7027 | Programmable cellular solids Babak Haghpanah ([email protected]), Northeastern University, United States America Hamid Ebrahimi ([email protected]), Northeastern University, United States America Davood Mousanezhad ([email protected]), Northeastern University, United States America Ashkan Vaziri ([email protected]), Northeastern University, United States America 17h10 9350 | Fabrication and Characterization of Fe doped TiO2 Membranes for Ultrafiltration Dong Sik Bae ([email protected]), Changwon National University, Korea, South 17h30 9182 | ANALYSIS OF COMPOSITE MEMBRANES IN THE SEPARATION OF EMULSIONS SUNFLOWER OIL/WATER Zeni, M. ([email protected]), Caxias do Sul University, Brazil Santos dos, V. ([email protected]), Caxias do Sul University, Brazil Biron, D. ([email protected]), Caxias do Sul University, Brazil Bergmann, C.P. ([email protected]), Universidade Federal do Rio Grande do Sul, Brazil

Wednesday 17 June Room NUX

Session 25.5 | Chairs: Pyl, Lincy ([email protected]), Vrije Universiteit Brussel (VUB), Belgium and Waas, Anthony M. ([email protected]), University of Michigan, United States America 11h00 7940 | Fatige damage identification of fibre reinforced composites Pyl, Lincy ([email protected]), Vrije Universiteit Brussel (VUB)-Department Mechanics of Materials and Constructions, Belgium Zastavnik, Filip ([email protected]), Vrije Universiteit Brussel (VUB), Belgium Sol, Hugo ([email protected]), Vrije Universiteit Brussel (VUB), Belgium Danny Van Hemelrijck ([email protected]), Vrije Universiteit Brussel (VUB), Belgium 11h20 7958 | An evaluation of micro-scale based continuum damage mechanics models applied to low energy impact loads in composite materials Sartorato, Murilo ([email protected]), University of São Paulo, Brazil Tita, Volnei ([email protected]), University of São Paulo, Brazil 11h40 7975 | Non linear elastic behaviour of glass fibre reinforced composites with delamination Maroua Hammami ([email protected]), Ecole Nationale d''Ingenieur de Sfax, Tunisia Abderrahim Elmahi ([email protected]), Institut Universitaire de Technologie, France Chafik Karra ([email protected]), Institut Preparatoire Etudes d''Ingenieur de Sfax , Tunisia Mohamed Haddar ([email protected]), Ecole Nationale d''Ingenieur de Sfax, Tunisia 12h00 8062 | Initiation of failure in a unidirectional fiber composite in a four point bend setup Wind, Jens L. ([email protected]), Aarhus University, Denmark Waas, Anthony M. ([email protected]), University of Michigan, United States America Jensen, Henrik M. ([email protected]), Aarhus University, Denmark

71

12h20 8077 | Failure modes of unidirectional fiber reinforced materials under off-axis loading Marotzke, Christian G. ([email protected]), BAM, Fed. Inst. for Material Research & Testing, Germany Feldmann, Vitus ([email protected]), BAM, Fed. Inst. for Materials Research & Testing, Germany 12h40 8101 | Damage evaluation of hybrid sandwich panels after impacts Chiara Colombo ([email protected]), Politecnico di Milano, Italy Laura Vergani ([email protected]), Politecnico di Milano, Italy Heinz Palkowski ([email protected]), TU Clausthal, Germany Session 25.6 | Chairs: Cinefra, Maria ([email protected]), Politecnico di Torino, Italy And Hafeez,F ([email protected]), The Petroleum Institute, United Arab Emirates 14h00 8107 | INFLUENCE OF PLY THICKNESS ON THE DAMAGE EVOLUTION IN OPEN-HOLE LAMINATE PLATES Moure, Marta M. ([email protected]), Universidad Carlos IIII of Madrid, Spain Garcia-Castillo, Shirley K. ([email protected]), Universidad Carlos IIII of Madrid, Spain Sánchez-Sáez, Sonia ([email protected]), Universidad Carlos IIII of Madrid, Spain Barbero, Ever J. ([email protected]), West Virginia University, United States America Barbero, Enrique ([email protected]), Universidad Carlos IIII of Madrid, Spain 14h20 8159 | FREE-VIBRATION ANALYSIS OF DELAMINATED SHELLS VIA UNIFIED FORMULATION Cinefra, Maria ([email protected]), Politecnico di Torino, Italy Carrera, Erasmo ([email protected]), Politecnico di Torino, Italy Valvano, Stefano ([email protected]), Politecnico di Torino, Italy 14h40 8784 | Thermo-mechanical behavior of aeronautical composite materials exposed to fire Bertheau Denis ([email protected]), Pprime Institute / Ensma, France Lainé Eric ([email protected]), Pprime Institute / Ensma, France Denis Damien ([email protected]), Pprime Institute / Ensma, France De Vicente Rocío ([email protected]), University of Seville, Spain 15h00 8229 | Fibre reinforced concrete with a combination of polyolefin and steel-hooked fibers Alberti ([email protected]), Marcos G., Spain Enfedaque ([email protected]), Alejandro, Spain Galvez ([email protected]), Jaime C., Spain 15h20 8576 | Simulation of Lightning Strike Damage in Carbon Nanotube Doped CFRP Composites Soykasap, Omer ([email protected]), Afyon Kocatepe University, Turkey Karakaya, Sukru ([email protected]), Afyon Kocatepe University, Turkey Colakoglu, Mehmet ([email protected]), Adnan Menderes University, Turkey 15h40 8675 | Experimental investigation of the interlaminar fracture of composite materials in mode III Assaad Hani ([email protected]), University Of Balamand, Lebanon Cynthia Aoun ([email protected]), University Of Balamand, Lebanon Jihad Rishmany ([email protected]), University Of Balamand, Lebanon Issam Tawk ([email protected]), University Of Balamand, Lebanon

72

Session 25.7 | Chairs: Cinefra, Maria ([email protected]), Politecnico di Torino, Italy And Hafeez,F ([email protected]), The Petroleum Institute, United Arab Emirates 16h30 8681 | STUDY ON BEHAVIOUR OF GRE TUBES SUBJECTED TO REPEATED INDENATION LOAD AT DIFFERENT LOCATIONS Hafeez,F ([email protected]), The Petroleum Institute, United Arab Emirates AlMaskari,F ([email protected]), The Petroleum Institute, United Arab Emirates 16h50 8692 | The properties of Composite Coatings under Lubrication Conditions with ZDDP and Ionic Liquid as a Lubricant Madej, Monika ([email protected]), Kielce University of Technology, Poland Ozimina, Dariusz ([email protected]), Kielce University of Technology, Poland Marczewska – Boczkowska, Krystyna ([email protected]), Lublin University of Technology, Poland 17h10 8694 | Damage development ahead of growing cracks in unidirectional fibre reinforced plastic composites Vo, V.N.N ([email protected]), UNSW Australia, Australia Crosky, A. ([email protected]), UNSW Australia, Australia 17h30 8699 | Friction and wear behavior of the hybrid ceramic composites Baranowicz, Paweł ([email protected]), NZOZ EKSTRADENT, Poland Wysokińska-Miszczuk, Joanna ([email protected]), Medical University of Lublin, Poland Ozimina, Dariusz ([email protected]), Kielce University of Technology, Poland Madej, Monika ([email protected]), Kielce University of Technology, Poland 17h50 8718 | Fracture Mechanic Analysis of Bondings for Multi-Material Vehicle Components Kickert, Reiner ([email protected]), Leichtwerk AG, Germany Weerts, Ulf ([email protected]), Leichtwerk AG, Germany Kloss, Thomas ([email protected]), Leichtwerk AG, Germany Kleemann, Sebastian ([email protected]), Technische Universität Braunschweig, Institut fu ̈r Konstruktionstechnik, Germany Vietor, Thomas ([email protected]), Technische Universität Braunschweig, Institut fu ̈r Konstruktionstechnik, Germany

73

Poster Session (Wednesday, Foyer Level -1, 09h00 – 13h00)

Please place your poster in a vacant booth, Tuesday afternoon or Wednesday Morning

Size up to A0 9168 | Dynamic response of Kevlar: Numerical analysis Rodríguez-Millán, Marcos ([email protected]), University Carlos III of Madrid, Spain López-Gálvez, Hector ([email protected]), University Carlos III of Madrid, Spain Marco, Miguel ([email protected]), University Carlos III of Madrid, Spain Santiuste, Carlos ([email protected]), University Carlos III of Madrid, Spain Miguélez, Henar ([email protected]), University Carlos III of Madrid, Spain 8663 | Program ANSLACOP – Analitical solution of bending problem of layered composite plates Rakocevic, Marina ([email protected]), University of Montenegro, Faculty of Civil Engineering, Podgorica, Republic of Montenegro 8664 | Analysis of influences at layered composite rectangular plates obtained using the program ANSLACOP Rakocevic, Marina ([email protected]), University of Montenegro, Faculty of Civil Engineering, Podgorica, Republic of Montenegro 9092 | The mechanical properties of a friction-stir-welded aluminum alloy (6005A) having a double skin structure for railway applications Choi, Dooho ([email protected]), Korea Railroad Research Institute, Korea, South 8980 | Filament winding of complex axisymmetric geometries: numerical simulation and fabrication using geodesic and non-geodesic paths Vargas R Erik ([email protected]), Université de Franche-Comté, France 8050 | Fungal biocorrosion as a reason of the changes in the structure of thermoplastic polymer composites reinforced with plant fillers Barton-Pudlik Joanna ([email protected]), Opole University, Poland Czaja Krystyna ([email protected]), Opole University, Poland Lipok Jacek ([email protected]), Opole University, Poland 9074 | Thermomechanical behaviour of epoxy matrix reinforced by titaniun oxide nanotubes (19. Nano-Composites) Albuquerque, Ederson L. F. ([email protected]), CEFET/RJ, Brazil Souza, Juliana P. B. ([email protected]), CEFET/RJ, Brazil Barros, Silvio R. ([email protected]), CEFET/RJ, Brazil 7971 | Numerical and experimental studies of IED protective panel subjected to IED blast Dybcio, Paweł ([email protected]), Military University of Technology, Poland Barnat, Wiesław ([email protected]), Military University of Technology, Poland 7988 | POSS/ethylene copolymer materials – study on structural, morphological and thermal properties Groch, Paweł ([email protected]), Opole University, Faculty of Chemistry, Department of Chemical Technology and Polymer Chemistry, Poland Dziubek, Katarzyna ([email protected]), Opole University, Faculty of Chemistry, Department of Chemical Technology and Polymer Chemistry, Poland Czaja, Krystyna ([email protected]), Opole University, Faculty of Chemistry, Department of Chemical Technology and Polymer Chemistry, Poland 8048 | Optimization of the composition of ceramics Al2O3 and aramid fabric Twaron T750 in terms of stab resistance. Sokołowski, Dariusz ([email protected]), Military University of Technology, Poland Barnat, Wiesław ([email protected]), Military University of Technology, Poland Gieleta, Roman ([email protected]), Military University of Technology, Poland

74

8058 | Numerical simulation of rigid body impact on airboat’s composite bottom coating Barnat, Wieslaw ([email protected]), Military Univeristy of Technology, Poland Trzaska, Malwina ([email protected]), Military Univeristy of Technology, Poland Kiczko, Andrzej ([email protected]), Military Univeristy of Technology, Poland 8640 | Highly conductive polymer/metal/CNT composite fiber prepared by melt-spinning process Tae Hwan Lim ([email protected]), Korea Institute of Industrial Technology, Korea, South Sang Young Yeo ([email protected]), Korea Institute of Industrial Technology, Korea, South 8267 | Carbon Nano Composites: in-situ Polymerization Technique for preparing CNT/Graphene Nanocomposites at low Cost and by scalable Procedures Martin Wildemann ([email protected]), University of Hamburg, Germany Georg Schlicke ([email protected]), Germany Gerrit Luinstra ([email protected]), University of Hamburg, Germany 9125 | The effect of chisel edge on drilling-induced delamination Zarif Karimi, Navid ([email protected]), University of Bologna, Italy Minak, Giangiacomo ([email protected]), University of Bologna, Italy Kianfar, Parnian ([email protected]), Amirkabir University of Technology, Iran Hossein Heidary ( [email protected]), University of Tafresh, Iran 7583 | Study of a porous ceramic material impregnated with titania and silver for water purification Acchar W. ([email protected]), Post-graduation Program on Materials Science and Engineering-UFRN, Brazil Santos I. ([email protected]), Post-graduation Program on Materials Science and Engineering-UFRN, Brazil 9175 | Inter-laminar fracture toughness measurement of the mixed-mode delamination using acoustic emission technique Zarif Karimi, Navid ([email protected]), University of Bologna, Italy Fotouhi, Mohamad ([email protected]), Amirkabir University of Technology, Iran Saeedifar, Milad ([email protected]), Amirkabir University of Technology, Iran Minak, Giangiacomo ([email protected]), University of Bologna, Italy Ahmadi Najafabadi, Mehdi ([email protected]), Amirkabir University of Technology, Iran 8128 | Effect of solid waste addition on the properties of soil-cement based composite Amaral, Mateus C. ([email protected]), UENF/PPGECM, Brazil Bou-Issa, Ranny A. ([email protected]), UENF/GMCer, Brazil Siqueira, Fabricio B. ([email protected]), UENF/PPGECM, Brazil Holanda, José N.F. ([email protected]), UENF/LAMAV, Brazil 6978 | Stochastic analysis of interfacial effects in polymeric nanocomposites Silani, Mohammad ([email protected]), Institute of Structural Mechanics, Bauhaus--University Weimar, Germany Almasi, Ashkan ([email protected]), Institute of Structural Mechanics, Bauhaus--University Weimar, Germany Talebi, Hossein ([email protected]), School of Civil and Environmental Engineering, The University of New South Wales, Australia Rabczuk, Timon ([email protected]), Institute of Structural Mechanics, Bauhaus--University Weimar, Germany 9177 | MODELLING SPECIAL DRILL BIT GEOMETRY FOR CFRP COMPOSITES Feito, N. ([email protected]), Department of Mechanical Engineering, Universidad Carlos III de Madrid, Spain Díaz-Álvarez, A. ([email protected]), Department of Mechanical Engineering, Universidad Carlos III de Madrid, Spain López-Puente, J. ([email protected]), Department of Continuum Mechanics and Structural Analysis, Universidad Carlos III de Madrid, Spain Miguélez, M.H. ([email protected]), Department of Mechanical Engineering, Universidad Carlos III de Madrid, Spain 9122 | Effect of Epoxy Structures on Thermal Conductivities of Liquid Crystalline Epoxy/Alumina Composites Kim, Jinhwan ([email protected]), Sungkyunkwan University, Korea, South 8052 | Experimental and numerical assessment of two FRP-based strengthening systems for earthquake damaged precast reinforced concrete wall panels Dan, Daniel ([email protected]), Politehnica University Timisoara, Romania Carla, Todut ([email protected]), Politehnica University Timisoara, Romania Valeriu, Stoian ([email protected]), Politehnica University Timisoara, Romania

75

9161 | Numerical study of the static deflection of a sandwich beam in the complex material Aguib S. ([email protected]), M''Hamed Bougara University of Boumerdes, Algeria Nour A. ([email protected]), M''Hamed Bougara University of Boumerdes, Algeria Bossis G. ([email protected]), University of Nice-Sophia Antipolis, CNRS, France Djedid T. ([email protected]), M''Hamed Bougara University of Boumerdes, Algeria Chikh N. ([email protected]), M''Hamed Bougara University of Boumerdes, Algeria Chevalier Y. ([email protected]), Higher Institute of Mechanics of Paris (ISMEP),France 8085 | Failure mechanisms of sandwich beams with stainless steel mesh faces and aluminum foam core under static and dynamic loading conditions Linul, Emanoil ([email protected]), Politehnica University of Timisoara, Romania Voiconi, Tudor ([email protected]), Politehnica University of Timisoara, Romania Marsavina, Liviu ([email protected]), Politehnica University of Timisoara, Romania Kováčik, Jaroslav ([email protected]), Slovak Academy of Science, Institute of Materials & Machine Mechanics SAS, Slovak Republic Sadowski, Tomasz ([email protected]), Department of Solid Mechanics, Lublin University of Technology, Poland Kneć, Marcin ([email protected]), Department of Solid Mechanics, Lublin University of Technology, Poland 9552 | Dynamic analysis and control of laminated soft core sandwich panels with active piezoelectric elements Araujo, Aurelio L. ([email protected]), IDMEC, Instituto Superior Tecnico, Universidade de Lisboa, Portugal Carvalho, Vitor S. ([email protected]), IDMEC, Instituto Superior Tecnico, Universidade de Lisboa, Portugal Mota Soares, Cristovao M. ([email protected]), IDMEC, Instituto Superior Tecnico, Universidade de Lisboa, Portugal Mota Soares, Carlos A. ([email protected]), IDMEC, Instituto Superior Tecnico, Universidade de Lisboa, Portugal Ferreira, Antonio J.M. ([email protected]), Departamento de Engenharia Mecanica, Faculdade de Engenharia, Universidade do Porto, Portugal, Portugal 9582 | The Influence of Residual Stresses on the Micro-Crack Propagation Direction Majer, Zdenek ([email protected]), Brno University of Technology, Czech Republic Nahlik, Lubos ([email protected]), Institute of Physics of Materials of the Academy of Sciences of the Czech Republic, Czech Republic 9196 | Alkali resistance of GFRP reinforcing bars slightly damaged by high temperatures Moon, Doyoung ([email protected]), Kyungsung University, Korea, South Oh, Hongseoup ([email protected]), Gyeongnam National University of Science and Technology, Korea, South 9079 | A Hybrid Sandwich Design for Supporting a Large Vessel in the Ship Repair Industry Lim, Jae-Yong ([email protected]), Korea Railroad Research Institute, Korea, South Kim, Jeongguk ([email protected]), Korea Railroad Research Institute, Korea, South Choi, Dooho ([email protected]), Korea Railroad Research Institute, Korea, South Seo, Sungil ([email protected]), Korea Railroad Research Institute, Korea, South 7836 | Influence of the filler particles on Polymer Electrolyte Membranes S.Ramesh ([email protected]), University of Malaya, Malaysia Y. K. Mahipal ([email protected]), University of Malaya, Malaysia R.Shanti ([email protected]), University of Malaya, Malaysia K.Ramesh ([email protected]), University of Malaya, Malaysia 8575 | Polyamide/Silica Composite Membrane Applied to Separation of Aqueous Isopropanol Solution by Pervaporation Process Huang, Shu-Hsien ([email protected]), National Ilan University, Taiwan Hsu, Kai-Ting ([email protected]), National Ilan University, Taiwan Lee, Kueir-Rarn ([email protected]), Chung Yuan University, Taiwan Lai, Juin-Yih ([email protected]), Chung Yuan University, Taiwan 8370 | Electrospun MTMS/PVDF Nanofibrous Membranes for CO2 Absorption in Membrane Contactor applications Yi-Feng Lin ([email protected]), Chung Yuan Christian University, Taiwan 8225 | Experimental and theoretical investigation on shear of steel-polypropylene fiber reinforced high performance concrete deep beams with and without openings Smarzewski, Piotr ([email protected]), Lublin University of Technology, Faculty of Civil Engineering and Architecture, Poland Barnat-Hunek, Danuta ([email protected]), Lublin University of Technology, Faculty of Civil Engineering and Architecture, Poland

76

7723 | The Importance of Sample Preparation of Wood Polymer Composites (WPC) for FTIR Spectroscopy and Thermal Analyses Yilgor, Nural ([email protected]), Department of Forest Products Chemistry & Technology, Faculty of Forestry, Istanbul University, Turkey Kanturk Figen, Aysel ([email protected]), Chemical and Metallurgical Faculty, Yıldız Technical University, Turkey Sabriye Piskin ([email protected]), Chemical and Metallurgical Faculty, Yıldız Technical University, Turkey 7088 | Numerical-experimental failure analysis of composite columns with open cross-sections under uniform compression Debski, Hubert ([email protected]), Lublin University of Technology, Poland Teter, Andrzej ([email protected]), Lublin University of Technology, Poland Jonak, Jozef ([email protected]), Lublin University of Technology, Poland 7090 | Failure analysis of thin-walled composite channel section column Debski, Hubert ([email protected]), Lublin University of Technology, Poland Jonak, Jozef ([email protected]), Lublin University of Technology, Poland 9171 | The simulating study of piezoelectricity on an GaN nanorod under applied lateral forces Shang-Chao Hung ([email protected]), Shih Chien University Kaohsiung Campus, Taiwan Chih Ming Lin ([email protected]), National Taitung University, Taiwan Nai-Jen Cheng ([email protected]), National Kaohsiung University of Applied Sciences, Taiwan 7655 | Nanocomposite Based Solid Polymer Electrolytes T Subramaniam, Ramesh ([email protected]), University of Malaya, Malaysia Rajantharan, Shanti ([email protected]), University of Malaya, Malaysia Kasi, Ramesh ([email protected]), University of Malaya, Malaysia 8093 | Novel carbon nanostructures as modifiers of elastic and electrical properties of polyvinylalcohol composites Zicans, J. ([email protected]), Riga Technical University, Institute of Polymer Materials, Latvia Merijs Meri, R. ([email protected]), Riga Technical University, Institute of Polymer Materials, Latvia Ivanova, T. ([email protected]), Riga Technical University, Institute of Polymer Materials, Latvia Berzina, R. ([email protected]), Riga Technical University, Institute of Polymer Materials, Latvia Kokars, V. ([email protected]), Riga Technical University, Faculty of Materials Sciences and Applied Chemistry, Department of Chemistry, Latvia 8223 | Hybrid steel-polypropylene fiber for shear strengthening of reinforced high performance concrete beams with and without openings Smarzewski, Piotr ([email protected]), Lublin University of Technology, Faculty of Civil Engineering and Architecture, Poland Barnat-Hunek, Danuta ([email protected]), Lublin University of Technology, Faculty of Civil Engineering and Architecture, Poland 7875 | THE ULTIMATE RESISTANCE MOMENT OF REINFORCED CONCRETE BEAMS STRENGTHENED WITH CFRP Skuturna, Tomas ([email protected]), Vilnius Gediminas Technical University, Lithuania Valivonis, Juozas ([email protected]), Vilnius Gediminas Technical University, Lithuania 6884 | One-step synthesis and characterization of nanocomposite based on carbon nanotubes/aluminum and their reinforcement properties Reis, Marcos A. L. ([email protected]), Federal University of Para, Brazil Simões, Sónia ([email protected]), University of Porto, Portugal Rodrigues, Elizabeth M. S. ([email protected]), Federal University of Para, Brazil Viana, Filomena ([email protected]), University of Porto, Portugal Vieira, Maria T. F. ([email protected]), University of Coimbra, Portugal Jordan Del Nero ([email protected]), Federal University of Para, Brazil Vieira, Manuel F. ([email protected]), University of Porto, Portugal 9116 | The fabrication of polyamide/polyacrylonitrile composite hollow fiber membranes via interfacial polymerization for pervaporation Tsai, Hui-An ([email protected]), Dept. of Creative Fashion Design, Taoyuan Innovation Institute of Technology, Taoyuan, Taiwan, Taiwan Lee, Kueir-Rarn ([email protected]), R&D Center for Membrane Technology, Chung-Yuan University, Taoyuan, Taiwan, Taiwan Lai, Juin-Yih ([email protected]), R&D Center for Membrane Technology, Chung-Yuan University, Taoyuan, Taiwan, Taiwan

77

7622 | EVALUATION OF THREE-POINT BENDING FRACTURE TESTS OF SELECTED CONCRETE – PART I: MECHANICAL FRACTURE PARAMETERS Šimonová Hana ([email protected]), Brno University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics, Czech Republic Havlíková Ivana ([email protected]), Brno University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics, Czech Republic Daněk Petr ([email protected]), Brno University of Technology, Faculty of Civil Engineering, Institute of Building Testing, Czech Republic Keršner Zbyněk ([email protected]), Brno University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics, Czech Republic 7813 | Finite Element Analysis of the Effects of Polymer Shrinkage on Composite Fracture Toughness Wang, Wenhai ([email protected]), Temple University, United States America Sadeghipour, Keya ([email protected]), Temple University, United States America Baran, George ([email protected]), Temple University, United States America 9055 | Analysis of Wear Properties of Hot-Pressed Al-Zn-Mg-Cu Metal Matrix Composite by Adding Al-Si/SiCp Composite Powder Eun Sun Lee ([email protected]), Pusan National University, Korea, South Jeongil Bang ([email protected]), Pusan National University, Korea, South Jeong-Jung Oak ([email protected]), GCRC-SOP, Pusan National University, Korea, South Yong Ho Park ([email protected]), Pusan National University, Korea, South 9053 | Fabrication and Analysis of Mechanical Property of Al-Si/SiCp + Al-Mg MMC bi-reinforced with Ti whisker by Powder Metallurgy Jeongil Bang ([email protected]), Pusan National University, Korea, South Jeong-Jung Oak ([email protected]), Pusan National University, Korea, South Yong ho Park ([email protected]), Pusan National University, Korea, South 7683 | EVALUATION OF THREE-POINT BENDING FRACTURE TESTS OF SELECTED CONCRETE – PART II: RESULTS OF ACOUSTIC EMISSION METHOD Topolář Libor ([email protected]), Brno University of Technology, Faculty of Civil Engineering, Czech Republic Matysík Michal ([email protected]), Brno University of Technology, Faculty of Civil Engineering, Czech Republic Daněk Petr ([email protected]), Brno University of Technology, Faculty of Civil Engineering, Czech Republic Pazdera Luboš ([email protected]), Brno University of Technology, Faculty of Civil Engineering, Czech Republic 8725 | Progressive Failure Analysis of Adhesive Joints of Composite Pressure Vessels Using CZM and VBA Kang, SeungGu ([email protected]), Graduate School of Mechanical Design Engineering, Hanbat Nat’l Univ., Korea, South Shin, KwangBok ([email protected]), Dept. of Mechanical Engineering, Hanbat Nat’l Univ., Korea, South Hwang, TaeKyung ([email protected]), Agency for Defense Development, Korea, South 8647 | Poly(4-methyl-1-pentene) / metal-organic framework MIL-100 mixed matrix membranes for gas separation Ywu-Jang Fu ([email protected]), Vanung University, Taiwan Li-Hua Cheng ([email protected]), ZJU, China Chia-Her Lin ([email protected]), CYCU, Taiwan Yu-Ching Huang ([email protected]), CYCU, Taiwan Chien-Chieh Hu ([email protected]), CYCU, Taiwan Kueir-Rarn Lee ([email protected]), CYCU, Taiwan Juin-Yih Lai ([email protected]), CYCU, Taiwan 8723 | INVESTIGATION OF SOUND ABSORPTION PROPERTIES OF ENVIRONMENTALLY MODIFIED AGAVE AMERICANA FIBERS / POLYURETHANE COMPOSITES Dilara Kocak ([email protected]), Marmara Universty, Turkey Nigar Merdan ([email protected]), Istanbul Commerce Universty, Turkey 9048 | Finite Element Investigation on Load-Stress Experiment of Homogeneous GaN Nano-Bridge Shang-Chao Hung ([email protected]), Shih Chien University Kaohsiung Campus, Taiwan Yi-Cheng Hsu ([email protected]), National Pingtung University of Science and Technology, Taiwan Nai-Jen Cheng ([email protected]), National Kaohsiung University of Applied Sciences, Taiwan 8809 | Influence of nano TiO2 on selected fire properties of beech plywood Jaskolowski, Waldemar ([email protected]), The Main School of Fire Service , Poland Maminski, Mariusz ([email protected]), Warsaw Agricultural University - SGGW, Poland Borysiuk, Piotr ([email protected]), Warsaw Agricultural University - SGGW, Poland

78

7885 | Some problems of modeling of hyperbolic heat conduction in laminates by using TAT Radzikowska Alina ([email protected]), Technical University of lodz, Poland 7892 | Simulation of process-induced failure behavior in cutting operations of hybrid FRP-metal composites by means of FEM Dröder, Klaus ([email protected]), Institute of Machine Tools and Production Technology, University of Braunschweig, Germany Gebken, Tobias ([email protected]), Institute of Machine Tools and Production Technology, University of Braunschweig, Germany Gerdes, Arne ([email protected]), Sitech GmbH, Germany Große, Thomas ([email protected]), Institute of Machine Tools and Production Technology, University of Braunschweig, Germany Plath, Armin ([email protected]), Volkswagen AG, Germany 8631 | Influence of the crack length on mode III results Bonhomme, Jorge ([email protected]), University of Oviedo, Spain Mollon, Victoria ([email protected]), University of Oviedo, Spain Viña, Jaime ([email protected]), University of Oviedo, Spain Argu ̈elles, Antonio ([email protected]), University of Oviedo, Spain

79

Thursday 18 June Room MORUS IV

Session 35 - Fibre Metal Laminates and Composites Session 35.1 | Chairs: Mania, R.J. ([email protected]), Lodz University of Technology, Poland 11h00 7518 | Study on Behavior of Compresive Deformation and Failure of Mo Fibres Reinforced TiAl Based Composites Sun, Dongli ([email protected]), Harbin Institute of Technology, China Wang, D Q ([email protected]), Harbin Institute of Technology, China Wang, Q ([email protected]), Harbin Institute of Technology, China 11h20 9224 | FEM simulation of bending aspect in Fiber Metal Laminates Ostapiuk , M. ([email protected]), Lublin University of Technology, Poland Surowska, B. ([email protected]), Lublin University of Technology, Poland Bieniaś, J. ([email protected]), Lublin University of Technology, Poland Majerski, K. ([email protected]), Lublin University of Technology, Poland 11h40 9225 | Failure analysis of Fiber Metal Laminates after bending strength test Surowska, B. ([email protected]), Lublin University of Technology, Poland Ostapiuk , M. ([email protected]), Lublin University of Technology, Poland Bieniaś, J. ([email protected]), Lublin University of Technology, Poland Majerski, K. ([email protected]), Lublin University of Technology, Poland 12h00 7519 | Deformation and fracture behavior of Mof/TiAl composites under uniaxial tensile loading Wang, Qing ([email protected]), Harbin Institute of Technology, China Wang, D Q ([email protected]), Harbin Institute of Technology, China Sun, Dongli ([email protected]), Harbin Institute of Technology, China 12h20 7675 | Experimental versus analytical-numerical study of buckling and postbuckling of open cross section FML profiles Mania, R.J. ([email protected]), Lodz University of Technology, Poland 12h40 7703 | On suppressing the indentation failure of glass-epoxy cross ply laminates by elasto-plastic interleaves Periyasamy, Manikandan ([email protected]), Nanyang Technological University, Singapore Gin Boay, Chai ([email protected]), Nanyang Technological University, Singapore Session 20.4 | Chairs: Silva, Arlindo ([email protected]), Instituto Superior Técnico, University of Lisbon, Portugal 14h00 9078 | Study on mechanical properties and bio-degradability of matrix modified banana fiber/ Polyester composite Rai, Bhuvneshwar ([email protected]), Shriram Institute for Industrial Research, Delhi, India Kumar, Gulshan ([email protected]), G. G. I. P. University, Dwarka, Delhi, India Diwan, R. K. ([email protected]), Shriram Institute for Industrial Research, Delhi, India 14h20 8754 | INFLUENCE OF RTM, HAND LAY-UP AND AUTOCLAVE MANUFACTURING PROCESSES IN VEGETABLE FIBREREINFORCED COMPOSITE MECHANICAL PROPERTIES EXPOSED TO UV RADIATION Furtado, Samuel ([email protected]), Instituto Superior Técnico, University of Lisbon, Portugal Silva, Arlindo ([email protected]), Instituto Superior Técnico, University of Lisbon, Portugal Alves, Cristiano ([email protected]), Federal University of Rio Grande do Norte, Brazil Dias, Ana P. ([email protected]), Instituto Superior Técnico, University of Lisbon, Portugal Araujo, Aurélio ([email protected]), Instituto Superior Técnico, University of Lisbon, Portugal

80

Esteves, José ([email protected]), Faculdade Engenharia, University of Porto, Portugal 14h40 9355 | Characterisation of hybrid flax carbon fibre composites Theofanis Ampatzidis ([email protected]), Cranfield University, Greece Hrushikesh Abhyankar ([email protected]), Cranfield University, India 15h00 7772 | Experimental and Numerical Investigation of Paperboard Creasing Li, Yujun ([email protected]), Institute of Applied Mechanics, RWTH Aachen University, Germany Simon, Jaan W. ([email protected]), Institute of Applied Mechanics, RWTH Aachen University, Germany Stapleton, Scott ([email protected]), RWTH Aachen University, Germany Reese, Stefanie ([email protected]), Institute of Applied Mechanics, RWTH Aachen University, Germany

Thursday 18 June Room VITUS I

Session 36.3 | Chairs: Dyzia, Maciej ([email protected]), Silesian University of Technology, Poland And Dolata, Anna J. ([email protected]), Silesian University of Technology, Poland 11h00 7918 | State of the Art – Adaptive Structures, Highly Integrated Structures Jörg Feldhusen ([email protected]), RWTH Aachen University, Germany Zhuzhell Montano ([email protected]), RWTH Aachen University, Germany Stephanie Dallmeier ([email protected]), RWTH Aachen University, Germany Jonathan Schmidt ([email protected]), RWTH Aachen University, Germany Anna-Lena Beger ([email protected]), RWTH Aachen University, Germany Iliyas Raza ([email protected]), RWTH Aachen University, Germany Liliane Ngahane Nana ([email protected]), RWTH Aachen University, Germany 11h20 8064 | An investigation of the effect of silk fabric structure on the mechanical property of the insert molded FRP Kiyoshi FUJIWARA ([email protected]), Mazda Motor Corporation, Japan Erika SUZUKI ([email protected]), Toyugiken Co., Ltd., Japan Tetsuo KIKUCHI ([email protected]), Toyugiken Co., Ltd., Japan Takashi FURUKAWA ([email protected]), HISHIKEN Co., Ltd., Japan Yuka TAKAI ([email protected]), Osaka Sangyo University, Japan Yuqiu YANG ([email protected]), Donghua University, China Hiroyuki HAMADA ([email protected]), Kyoto Institute of Technology, Japan 11h40 8116 | AlSi/SiCp+GRp hybrid composites obtained by suspension method Dyzia, Maciej ([email protected]), Silesian University of Technology, Poland Dolata, Anna J. ([email protected]), Silesian University of Technology, Poland 12h00 8119 | THE SELECTION OF THE PHASE COMPOSITION OF THE COMPOSITE DESIGNATED FOR PISTONS Dolata, Anna J. ([email protected]), Silesian University of Technology, Poland Dyzia M. ([email protected]), Silesian University of Technology, Poland 12h20 8705 | Development of carbon fiber/polypropylene composite bipolar plates for polymer electrolyte membrane fuel cell Song Hee Han ([email protected]), Chonbuk National University, Korea, South Seung Jin See ([email protected]), Chonbuk National University, Korea, South Ha Eun Lee ([email protected]), Chonbuk National University, Korea, South Seong Su Kim ([email protected]), Chonbuk National University, Korea, South

81

Session General | Chairs: Silva, Jose M. ([email protected]), RMIT University, Australia 14h00 7893 | Research of static and dynamic properties of composite structures manufactured with polyurethane resins Głodzik, Marcin ([email protected]), AGH University of Science and Technology, Poland Kita, Paweł ([email protected]), AGH University of Science and Technology, Poland Pociecha, Daniel ([email protected]), AGH University of Science and Technology, Poland Żaba, Krzysztof ([email protected]), AGH University of Science and Technology, Poland 14h20 9194 | The influence of metallic and non-metallic fillers on the polymer laminate structures Puchlerska, Sandra ([email protected]), AGH University of Science and Technology, Poland Kita, Paweł ([email protected]), AGH University of Science and Technology, Poland Głodzik, Marcin ([email protected]), AGH University of Science and Technology, Poland Żaba, Krzysztof ([email protected]), AGH University of Science and Technology, Poland Pociecha, Daniel ([email protected]), AGH University of Science and Technology, Poland 14h40 7891 | Temperature influence on fatigue and dynamic properties of epoxy laminate composites Pociecha, Daniel ([email protected]), AGH University of Science and Technology, Poland Kita, Paweł ([email protected]), AGH University of Science and Technology, Poland Głodzik, Marcin ([email protected]), AGH University of Science and Technology, Poland Żaba, Krzysztof ([email protected]), AGH University of Science and Technology, Poland 15h00 8820 | Improving Structural Damping of Composites by Viscoelastic Inclusions Silva, Jose M. ([email protected]), RMIT University, Australia Blacklock, Matthew ([email protected]), RMIT University, Australia Wang, Chun ([email protected]), RMIT University, Australia 15h20 8652 | On the Modal Acoustic Emission testing of composite structures DAHMENE, Fethi ([email protected]), Institut de Soudure, France YAACOUBI, Slah ([email protected]), Institut de Soudure, France 15h40 7545 | EFFECT OF TRANSVERSE CRACKING IN [θm/90n]s COMPOSITE LAMINATES WITH HYGROTHERMAL CONDITIONS - DESORPTION CASE - Mohamed khodjet-kesba ([email protected]), Laboratoire des sciences aéronautiques, Algeria Amina Benkhedda ([email protected]), Laboratoire des sciences aéronautique, Algeria E.A. Adda Bedia ([email protected]), Laboratoire matériaux et hydrologie, Algeria Billel Boukert ([email protected]), Laboratoire des sciences aéronautiques, Algeria

Thursday 18 June Room VITUS II

Session 25.8 | Chairs: Bruyneel, Michael ([email protected]), SAMTECH (A Siemens Company), Belgium 11h00 8108 | Validation of the SAMCEF material models for inter and intra-laminar damages in laminated composites made of NCF plies Bruyneel, Michael ([email protected]), SAMTECH (A Siemens Company), Belgium Delsemme, Jean-Pierre ([email protected]), SAMTECH (A Siemens Company), Belgium Jetteur, Philippe ([email protected]), SAMTECH (A Siemens Company), Belgium Lequesne, Cédric ([email protected]), SAMTECH (A Siemens Company), Belgium Sopelsa, Louis ([email protected]), SAMTECH (A Siemens Company), France Naito, Tadashi ([email protected]), Honda R&D, Japan Urushiyama, Yuta ([email protected]), Honda R&D, Japan

82

11h20 8829 | Influence of residual stresses on crack propagation in ceramic particulate composites Nahlik Lubos ([email protected]), Institute of Physics of Materials ASCR, Czech Republic Majer Zdenek ([email protected]), Faculty of Mechanical Engineering, Brno University of Technology, Czech Republic Bermejo Raúl ([email protected]), Montanuniversität Leoben , Austria Pletz Martin ([email protected]), Montanuniversität Leoben , Australia Hutar Pavel ([email protected]), Institute of Physics of Materials ASCR, Czech Republic 11h40 8801 | Progressive Fatigue Damage Analysis of CFRP under Multiaxial Stress State Song Zhou ([email protected]), Harbin Institute of Technology, China Yi Sun ([email protected]), Harbin Institute of Technology, China Jingran Ge ([email protected]), Harbin Institute of Technology, China Xiaojie Chen ([email protected]), Harbin Institute of Technology, China 12h00 6837 | Dynamic prediction fatigue life of composite wind turbine blade Samir, Lecheb ([email protected]), University of Boumerdes, Algeria Abdelkader, Nour ([email protected]), University of Boumerdes, Algeria Ahmed, Chellil ([email protected]), University of Boumerdes, Algeria Hamza, Mechakra ([email protected]), University of Boumerdes, Algeria Hichem, Ghanem ([email protected]), University of Boumerdes, Algeria Hocine, Kebir ([email protected]), University of Compiene, France 12h20 8657 | Analysis for delamination failure at the root end of the composite wind turbine blade Lee, Hak Gu ([email protected]), KIMS, Korea, South Park, Jisang ([email protected]), KIMS, Korea, South Kang, Min Gyu ([email protected]), KIMS, Korea, South 12h40 8821 | Deterioration Mechanism of Pultruded GFRP Profiles in Marine Environment Based on Microstructure Analysis Fang, Yuan ([email protected]), College of Civil Engineering, Nanjing Tech University, China Huo, Ruili ([email protected]), College of Civil Engineering, Nanjing Tech University, China Yang, Shulan ([email protected]), College of Civil Engineering, Nanjing Tech University, China Liu, Weiqing ([email protected]), College of Civil Engineering, Nanjing Tech University, China

Thursday 18 June Room VITUS III

Session 28 – Vibrations Session 28.1 | Chairs: Della, Christian N. ([email protected]), University of Glasgow, Singapore And Filippi, Matteo ([email protected]), Politecnico di Torino, Italy 11h00 6933 | Free Vibration Analysis of Composite Beams with Overlapping Delaminations under Axial Compressive Load Della, Christian N. ([email protected]), University of Glasgow, Singapore 11h20 9095 | Variable Kinematic 1D Theories for Flutter Analysis of Wings and Blades Carrera, Erasmo ([email protected]), Politecnico di Torino, RMIT University, Italy Filippi, Matteo ([email protected]), Politecnico di Torino, Italy 11h40 8931 | Plate Vibrations Using Static Analysis Eisenberger, Moshe ([email protected]), Technion - Israel Inst. Technology, Israel Deutsch, Aharon ([email protected]), Technion - Israel Inst. Technology, Israel

83

12h00 7657 | Dynamic Characterization of a Composite Concrete/GFRP Slab Junges, Paulo ([email protected]), Federal University of Santa Catarina (UFSC), Brazil Santos Neto, Almir B. S. ([email protected]), Federal University of Pampa (UNIPAMPA), Brazil La Rovere, Henriette L. ([email protected]), Federal University of Santa Catarina (UFSC), Brazil 12h20 7627 | Determining of Characteristics of Susbsystems of Mechatronic System by Exact and Approximate Methods and Their Correction Buchacz, Andrzej ([email protected]), Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Poland Session 28.2 | Chairs: Jędrysiak, Jarosław ([email protected]), Łódź University of Technology, Poland And Strozzi, Matteo ([email protected]), Università di Modena e Reggio Emilia, Italy 14h00 7797 | Tolerance modelling of three-layered composite structures with a periodic microstructure Jędrysiak, Jarosław ([email protected]), Łódź University of Technology, Poland Marczak, Jakub ([email protected]), Łódź University of Technology, Poland 14h20 9404 | A novel spectral dynamic stiffness method for exact modal analysis of composite plates and plate assemblies with mass and spring attachments Liu, Xiang ([email protected]), City University London, United Kingdom Banerjee, J. R. ([email protected]), City University London, United Kingdom 14h40 8762 | PPF MIMO Control of a Composite Carbon Fiber Plate Zippo, Antonio ([email protected]), Università di Modena e Reggio Emilia, Italy Pellicano, Francesco ([email protected]), Università di Modena e Reggio Emilia, Italy Barbieri, Marco ([email protected]), Università di Modena e Reggio Emilia, Italy Strozzi, Matteo ([email protected]), Università di Modena e Reggio Emilia, Italy 15h00 8186 | Vibration analysis of a composite concrete/GFRP slab induced by human activities Junges, Paulo ([email protected]), Universidade Federal de Santa Catarina, Brazil Pinto, R. C. A. ([email protected]), Universidade Federal de Santa Catarina, Brazil La Rovere, Henriette L. ([email protected]), Universidade Federal de Santa Catarina, Brazil

Thursday 18 June Room VITUS IV

Session 23.4 | Chairs: Larbi Walid ([email protected]), Conservatoire National des Arts et Métiers, France And Mirza, Olivia ([email protected]), University of Western Sydney, Australia 11h00 8514 | Finite element modeling of sound transmission between two acoustic cavities separated by a double-wall Larbi Walid ([email protected]), Conservatoire National des Arts et Métiers, France Deu ̈ Jean-François ([email protected]), Conservatoire National des Arts et Métiers, France 11h20 8015 | Numerical Analysis of Headed Stud Shear Connectors for Composite Steel–Concrete Beams Utilising Carbon Nanotube under Elevated Temperatures Mirza, Olivia ([email protected]), University of Western Sydney, Australia Sleiman, Khodr ([email protected]), University of Western Sydney, Australia

84

11h40 9058 | Research on Creep Behavior of Prestressed Composite Box-girders with Corrugated Steel Webs Li, Ming ([email protected]), Research Institute of Highway Ministry of Transport, China Song, Jianyong ([email protected]), Research Institute of Highway Ministry of Transport, China Li, Wanheng ([email protected]), Research Institute of Highway Ministry of Transport, China Zhang, Jinquan ([email protected]), Research Institute of Highway Ministry of Transport, China 12h00 9396 | MECHANICAL CHARACTERIZATION OF A CARBON FIBRE COMPOSITE THROUGH A COMBINED EXPERIMENTAL AND NUMERICAL APPROACH Sbarufatti, Claudio ([email protected]), Politecnico di Milano, Italy Gilioli, Andrea ([email protected]), Politecnico di Milano, Italy Manes, Andrea ([email protected]), Politecnico di Milano, Italy Giglio, Marco ([email protected]), Politecnico di Milano, Italy 12h20 9374 | Constituent materials micro-damage modeling in predicting progressive failure of braided fibre composites Nadeesh Singh Nobeen ([email protected]), Nanyang Technological University, Singapore Yucheng Zhong ([email protected]), Nanyang Technological University, Singapore Elvin S. M. Chia ([email protected]), DSO National Laboratories, Singapore Sunil C. Joshi ([email protected]), Nanyang Technological University, Singapore Zhong Chen ([email protected]), Nanyang Technological University, Singapore Session 11.4 | Chairs: Marques, António T. ([email protected]), FEUP, Portugal 14h00 9337 | Design of structural columns using composite systems Varajão, Joana F. D. ([email protected]), FEUP, Portugal Costa, Mariana I. M. ([email protected]), FEUP, Portugal Sá, José M. C. ([email protected]), FEUP, Portugal Marques, António T. ([email protected]), FEUP, Portugal Parente, Marco ([email protected]), FEUP, Portugal 14h20 7729 | Concrete Compression Struts Strengthened using Carbon Fiber Reinforced Polymers (CFRP) Changhyuk Kim ([email protected]), The University of Texas at Austin, United States America James O. Jirsa ([email protected]), The University of Texas at Austin, United States America Wassim M. Ghannoum ([email protected]), The University of Texas at Austin, United States America 14h40 7670 | Study of the performance of concrete to water and salt freeze-thawing conditions B. Li ([email protected]), Harbin Engineering University, China J. Z. Mao ([email protected]), Harbin Engineering University, China J. F. Lv ([email protected]), Harbin Engineering University, China L. M. Zhou ([email protected]), The Hong Kong Polytechnic University, Hong Kong

85

Thursday 18 June Room Morus II

Session 19.6 | Chairs: Rafiee, Roham (Composites Research Laboratory, Faculty of New Sciences & Technologies) 11h00 7895 | An effect of epoxy laminate composites modified using metallic powders Kita, Paweł ([email protected]), AGH University of Science and Technology, Poland Pociecha, Daniel ([email protected]), AGH University of Science and Technology, Poland Głodzik, Marcin ([email protected]), AGH University of Science and Technology, Poland Krzysztof, Żaba ([email protected]), AGH University of Science and Technology, Poland 11h20 8544 | Sulfur Doped Graphene/Polystyrene Nanocomposites for Electromagnetic Interference Shielding Shahzad, Faisal ([email protected]), Korea Institute of Science and Technology, Korea, South Koo, Chong Min ([email protected]), Korea Institute of Science and Technology, Korea, South Hong, Soon Man ([email protected]), Korea Institute of Science and Technology, Korea, South 11h40 9358 | Influence of Granule Size on Thermal Characteristics of Protein Based Silica-Aerogel Composites Mahesh Sachithanadam ([email protected]), Nanyang Technological University, Singapore Sunil C.Joshi ([email protected]), Nanyang Technological University, Singapore 12h00 9473 | Preparation and Properties of poly (acrylamide-co-alginate)/gold nanocomposites for inactivation of bacteria Zhang, Yanan ([email protected]), Nanjing University of Aeronautics and Astronautics, China 12h20 9424 | Synthesis and Tribological Properties of Copper-alumina Nanocomposites Prepared by Coprecipitation Technique Fu Xuelong ([email protected]), Nanjing University of Aeronautics & Astronautics, China Tao Jie ([email protected]), Nanjing University of Aeronautics & Astronautics, China 12h40 9023 | Flexible field emission lamps made using BaO nanowires emitters Cui, Yunkang ([email protected]), Nanjing Institute of technology, China Chen, Jing ([email protected]), Southeast University, China Zhang, Xiaobing ([email protected]), Southeast University, China Lei, Wei ([email protected]), Southeast University, China Yunsong Di ([email protected]), Southeast University, China

Session 27 - Modeling Nano Composites Session 27.1 | Chairs: Roy, Samit ([email protected]), University of Alabama, United States America and Tita, Volnei ([email protected]), Escola de Engenharia de São Carlos - Universidade de São Paulo, Brazil 14h00 8993 | Viscoplastic model analysis about the influence of Graphene Nanoplatelets in the Poly(Lactic Acid) timedependent mechanical behaviour under hydrolytic degradation Vieira, André C. ([email protected]), Escola de Engenharia de São Carlos - Universidade de São Paulo, Brazil Pinto, Viviana C. ([email protected]), Faculdade de Engenharia da Universidade do Porto, Portugal Pinto, Artur ([email protected]), Faculdade de Engenharia da Universidade do Porto, Portugal Magalhães, Fernão D. ([email protected]), Faculdade de Engenharia da Universidade do Porto, Portugal Guedes, Rui M. ([email protected]), Faculdade de Engenharia da Universidade do Porto, Portugal Tita, Volnei ([email protected]), Escola de Engenharia de São Carlos - Universidade de São Paulo, Brazil 14h20 7817 | PREDICTING FRACTURE BEHAVIOR IN NANO-GRAPHENE REINFORCED POLYMERS Roy, Samit ([email protected]), University of Alabama, United States America Akepati, Avinash ([email protected]), University of Alabama, United States America Unnikrishnan, Vinu ([email protected]), University of Alabama, United States America

86

14h40 7979 | Predicting Mechanical Properties of Fuzzy Fiber Rafiee, Roham ([email protected]), Composites Research Laboratory, Faculty of New Sciences & Technologies, University of Tehran, End of The North Karegar St., Tehran, Iran, Iran Ghorbanhosseini, Amin ([email protected]), Composites Research Laboratory, Faculty of New Sciences & Technologies, University of Tehran, End of The North Karegar St., Tehran, Iran, Iran 15h00 7540 | Finite element modeling of carbon nanotube agglomeration in polymers Chanteli, Aggeliki ([email protected]), University of Patras, Greece Tserpes, Konstantinos ([email protected]), University of Patras, Greece

Thursday 18 June Room QUERCUS

Session 36.4 | Chairs: Dai Gil Lee ([email protected]), KAIST, Korea, South And Sola Cyril ([email protected]), Airbus Helicopter, France 11h00 7188 | BEARING RESPONSE OF CFRPs: COMPARATIVE STUDY OF WOVEN AND UD FABRIC QUASI ISOTROPIC LAMINATES UNDER STATIC AND FATIGUE LOADS Sola Cyril ([email protected]), Airbus Helicopter, France Laurent Michel ([email protected]), Institut Clément Ader, France Lachaud Frédéric ([email protected]), Institut Clément Ader, France Castanié Bruno ([email protected]), Institut Clément Ader, France Delabie Arnaud ([email protected]), Airbus Helicopter, France Mermoz Emmanuel ([email protected]), Airbus Helicopter, France 11h20 7774 | Flexible cell culture device made of organically modified montmorillonite (OMMT) reinforced silicone rubber composites Han, Min-Gu ([email protected]), Chung-Ang University, Korea, South Jung, Kyung-Chae ([email protected]), Chung-Ang University, Korea, South Bae, Ji-Hun ([email protected]), Chung-Ang University, Korea, South Chang, Seung-Hwan ([email protected]), Chung-Ang University, Korea, South 11h40 7808 | Preparation of Al2O3/CaAl12O19/ZrO2 composite ceramic material by the hydration and sintering of Ca7ZrAl6O18-reactive alumina Madej, Dominika ([email protected]), AGH University of Science and Technology, Faculty of Materials Science and Ceramics, al. A. Mickiewicza 30, 30-059 Krakow, Poland, Poland Szczerba, Jacek ([email protected]), AGH University of Science and Technology, Faculty of Materials Science and Ceramics, al. A. Mickiewicza 30, 30-059 Krakow, Poland, Poland 12h00 9559 | Light weight hybrid composite tie bars for PEMFC and VRFB Soohyun Nam ([email protected]), KAIST, Korea, South Dongyoung Lee ([email protected]), KAIST, Korea, South Minkook Kim ([email protected]), KAIST, Korea, South Jinwhan Kim ([email protected]), KAIST, Korea, South Dai Gil Lee ([email protected]), KAIST, Korea, South

87

12h20 7898 | Benefit of a Damage Tolerant Design consideration and the role of SHM in the Structural Analysis of a Large Civil Aircraft Spoiler Karna, Nitesh K. ([email protected]), Institute of Constructional Lightweight Design, Johannes Kepler University Linz, Altenberger Straße 69, 4040 Linz, Austria: Christian Doppler Laboratory for Structural Strength Control of Lightweight Constructions, Johannes Kepler University Linz, Altenberger Straße 69, 4040 Linz, Austria, Austria Viechtbauer, Christoph ([email protected]), Institute of Constructional Lightweight Design, Johannes Kepler University Linz, Altenberger Straße 69, 4040 Linz, Austria: Christian Doppler Laboratory for Structural Strength Control of Lightweight Constructions, Johannes Kepler University Linz, Altenberger Straße 69, 4040 Linz, Austria, Austria Schagerl, Martin ([email protected]), Institute of Constructional Lightweight Design, Johannes Kepler University Linz, Altenberger Straße 69, 4040 Linz, Austria: Christian Doppler Laboratory for Structural Strength Control of Lightweight Constructions, Johannes Kepler University Linz, Altenberger Straße 69, 4040 Linz, Austria, Austria 12h40 9082 | Hygro-thermo-elastic behavior of composite plates by the higher shear deformation theory A.Benkhedda ([email protected]), Institut d''Aéronautique et des Etudes Spatiales, University of Blida1, Algeria, Algeria E.Adda ([email protected]), University of Sidi Belabbes, Algeria, Algeria A.Mahi ([email protected]), Institut d''Aéronautique et des Etudes Spatiales, University of Blida1, Algeria, Algeria M.Khodjet ([email protected]), Institut d''Aéronautique et des Etudes Spatiales, University of Blida1, Algeria, Algeria B.Boukert ([email protected]), Institut d''Aéronautique et des Etudes Spatiales, University of Blida1, Algeria, Algeria Session 35.2 | Chairs: Lauter, Christian ([email protected]), University of Paderborn, Germany And Abouhamzeh, Morteza ([email protected]), Delft University of Technology, Netherlands 14h00 7906 | Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding Wang, Zheng ([email protected]), University of Paderborn, Germany Lauter, Christian ([email protected]), University of Paderborn, Germany Sanitther, Bamned ([email protected]), University of Paderborn, Germany Frantz, Meike ([email protected]), University of Paderborn, Germany Troester, Thomas ([email protected]), University of Paderborn, Germany 14h20 8088 | Closed Form Solution to Estimate the Residual Stresses and Warpage During Cure of GLARE Abouhamzeh, Morteza ([email protected]), Delft University of Technology, Netherlands Sinke, Jos ([email protected]), Delft University of Technology, Netherlands Benedictus, Rinze ([email protected]), Delft University of Technology, Netherlands 14h40 9391 | The Preparation and Properties of Novel Fiber Metal Laminates Based on Aluminum-lithium Alloy LI, Huaguan ([email protected]), Nanjing University of Aeronautics and Astronautics, China XU, Yiwei ([email protected]), Nanjing University of Aeronautics and Astronautics, China HU, Yubing ([email protected]), Nanjing University of Aeronautics and Astronautics, China ZHENG, Xingwei ([email protected]), Shanghai Aircraft Manufacturing Company Limited, China LIU, Hongbing ([email protected]), Shanghai Aircraft Manufacturing Company Limited, China TAO, Jie ([email protected]), Nanjing University of Aeronautics and Astronautics, China 15h00 9384 | Effect of thermal cycling on the mechanical behaviors of Fibre Metal Laminate based on carbon fibre reinforced polyimide Hu, Yubing ([email protected]), Nanjing University of Aeronautics and Astronautics, China Li, Huaguan ([email protected]), Nanjing University of Aeronautics and Astronautics, China Duan, Lixiang ([email protected]), Nanjing University of Aeronautics and Astronautics, China Dai, Qiwei ([email protected]), Nanjing University of Aeronautics and Astronautics, China Tao, Jie ([email protected]), Nanjing University of Aeronautics and Astronautics, China Pan, Lei ([email protected]), Nanjing University of Aeronautics and Astronautics, China Xu, Jiang ([email protected]), Nanjing University of Aeronautics and Astronautics, China

88

Thursday 18 June Room OLIVA

Session 39 - Glass Composite Structures Session 39.1 | Chairs: Speranzini, Emanuela ([email protected]), Department of Engineering, University of Perugia, Italy and Galuppi, Laura ([email protected]), Department of Industrial Engineering, University of Parma, Italy 11h00 6959 | Post-cracking response of hybrid beams consisting of glass-GFRP and glass-SRP Speranzini, Emanuela ([email protected]), Department of Engineering, University of Perugia, Italy Agnetti, Stefano ([email protected]), Department of Engineering, University of Perugia, Italy 11h20 8063 | A study on the mechanical properties of insert molded FRP� with different inserting laminations of silk fabric Kiyoshi FUJIWARA ([email protected]), Mazda Motor Corporation, Japan Erika SUZUKI ([email protected]), Toyugiken Co., Ltd., Japan Tetsuo KIKUCHI ([email protected]), Toyugiken Co., Ltd., Japan Takashi FURUKAWA ([email protected]), HISHIKEN Co., Ltd., Japan Yuka TAKAI ([email protected]), Osaka Sangyo University, Japan Yuqiu YANG ([email protected]), Donghua University, China Hiroyuki HAMADA ([email protected]), Kyoto Institute of Technology, Japan 11h40 8114 | Optimal cold-bending and cold-lamination-bending of glass Galuppi, Laura ([email protected]), Department of Industrial Engineering, University of Parma, Italy Royer-Carfagni, Gianni ([email protected]), Department of Industrial Engineering, University of Parma, Italy 12h00 8714 | On the experimental determination of dynamical properties of laminated glass and a comparison with a theoretical model Lenci, S. ([email protected]), Polytechnic University of Marche, Italy Consolini, L. ([email protected]), Polytechnic University of Marche, Italy Clementi, F. ([email protected]), Polytechnic University of Marche, Italy 12h20 8727 | Experimental analysis of laminated glass with different interlayers Agnetti S. ([email protected]), Department of Engineering - University of Perugia, Italy Speranzini E. ([email protected]), Department of Engineering - University of Perugia, Italy 12h40 9189 | The strength of GFRP gratings under fatigue loading Habib, Amir Izzuddin Hasani ([email protected]), Universiti Teknologi PETRONAS, Malaysia Akbar, Ibrisam ([email protected]), Universiti Teknologi PETRONAS, Malaysia Session General | Chairs: Gavardinas, Ioannis D. ([email protected]), of Thessaly, Volos, Greece And Öktem, Ahmet S. ([email protected]), Gebze Technical University, Turkey 14h00 7704 | The Barenblatt analogue of dipolar gradient elasticity Gavardinas, Ioannis D. ([email protected]), of Thessaly, Volos, Greece Giannakopoulos, Antonios E. ([email protected]), Laboratory for Strength of Materials and Micromechanics, Department of Civil Engineering, University of Thessaly, Volos, Greece 14h20 9523 | DYNAMIC BEHAVIOR OF COMPOSITE DEEP CURVED TIMOSHENKO BEAMS UNDER BLAST LOAD WITH NUMERICAL METHODS Kalbaran, .zgu ̈r ([email protected]), Gebze Technical University, Turkey Kurtaran, Hasan ([email protected]), Gebze Technical University, Turkey Öktem, Ahmet S. ([email protected]), Gebze Technical University, Turkey

89

14h40 8570 | Analysis of Cf/SiC composite/304 stainless steel joints brazed with Ti-Zr-Be Dongyu Fan ([email protected]), University of Science and Technology Beijing,PR China, China Jihua Huang ([email protected]), University of Science and Technology Beijing, China Yihui Wang ([email protected]), University of Science and Technology Beijing, China Shuhai Chen ([email protected]), University of Science and Technology Beijing, China Xingke Zhao ([email protected]), University of Science and Technology Beijing, China 15h00 9369 | Fabrication of complex-curved composite parts by using shape memory polymer mandrel Liu, YJ ([email protected]), Harbin Institute of Technology, China Du, HY ([email protected]), Harbin Institute of Technology, China Zhao, W ([email protected]), Harbin Institute of Technology, China Liu, LW ([email protected]), Harbin Institute of Technology, China Leng, JS ([email protected]), Harbin Institute of Technology, China 15h20 9204 | Failure prediction and high-strain-rate behaviour of composite and hybrid fastened joints through physical and virtual testing methods with an aim to develop an idealised shear-tension macro model for large-scale structural simulations Baruah, Eju ([email protected]), Airbus Operations GmbH, Germany 15h40 8582 | AMPEROMETRIC BIOSENSORS BASED ON OXIDOREDUCTASES IMMOBILIZED ON NANOPARTICLES OF NOBLE METALS Gonchar, Mykhailo V. ([email protected]), University of Rzeszow; Institute of Cell Biology, NAS of Ukraine, Ukraine Stasyuk, Nataliya Ye. ([email protected]), Institute of Cell Biology, NAS of Ukraine, Ukraine Synenka, Maria M. ([email protected]), Institute of Cell Biology, NAS of Ukraine, Ukraine Gayda, Galina Z. ([email protected]), Institute of Cell Biology, NAS of Ukraine, Ukraine

Thursday 18 June Room CASTANEA

Session 25.9 | Chairs: Černy ́, Ivo ([email protected]), SVÚM a.s., Czech Republic 11h00 9147 | Numerical evaluation method for crack initiation and growth phenomena of polyurethane foam-based insulation structures under dynamic cyclic pressures using damage-coupled finite element analysis Chi-Seung Lee ([email protected]), Pusan National University, Korea, South Kwang-Ho Choi ([email protected]), Pusan National University, Korea, South Myung-Sung Kim ([email protected]), Pusan National University, Korea, South Jae-Myung Lee ([email protected]), Pusan National University, Korea, South 11h20 9098 | Influence of Nd3+:YAG laser irradiation on the structure of composites with carbon fibers Kaludjerović, Branka V. ([email protected]), Vinča Institute of Nuclear Science, Serbia Srećković, Milesa ([email protected]), University of Belgrade, Serbia Janićijević, Milovan ([email protected]), Metalac A D, Serbia Kovačević, Aleksander ([email protected]), University of Belgrade, Serbia 11h40 9061 | Determination of Characteristic Lengths for open-hole and pin-loaded Composite Joints by Means of 3D Progressive Damage Analysis Taheri-Behrooz, F. ([email protected]), Iran University of Science and Tehcnology, Iran Bakhshan, A. ([email protected]), Iran University of Science and Tehcnology, Iran

90

12h00 9062 | Load-displacement behavior simulation of shape memory alloy hybrid composites Taheri-Behrooz, F. ([email protected]), Iran University of Science and Technology, Iran Kiani, A. ([email protected]), Iran University of Science and Technology, Iran 12h20 8969 | An evaluation of mechanical properties and failure modes of multi-layer glass reinforced polypropylene thermoformed composite material to be used in automotive industry Černy ́, Ivo ([email protected]), SVÚM a.s., Czech Republic Mikulová, Dagmar ([email protected]), SVÚM a.s., Czech Republic Remar, Luboš ([email protected]), SVÚM a.s., Czech Republic 12h40 9212 | Instability analysis of Shear Bands using the instantaneous growth-rate of a perturbation Arriaga, Miguel ([email protected]), Columbia University, United States America McAuliffe, Colin ([email protected]), Columbia University, United States America Waisman, Haim ([email protected]), Columbia University, United States America

Session 36 ANR VERTEX RESEARCH PROGRAM Session 36 ANR VERTEX | Chairs: Bruno Castanié, Institut Clément Ader, France 14h00 7126 | THE VERTEX PROJECT: COMPLEX LOADING ANALYSIS AND VALIDATION OF COMPOSITE STRUCTURES Castanié Bruno ([email protected]), Institut Clément Ader, France 14h20 8941 | Definition of complex mechanical testing through numerical simulations and the use of an advanced behaviour law JULIEN, Cédric ([email protected]), ONERA, France HUCHETTE, Cédric ([email protected]), ONERA, France LAURIN, Frédéric ([email protected]), ONERA, France 14h40 8950 | Measurement of regularised boundary conditions on a composite plate with Stereo Digital Image Correlation Jean-Emmanuel, Pierré ([email protected]), Université de Toulouse, Institut Clément Ader, France Jean-Charles, Passieux ([email protected]), Université de Toulouse, Institut Clément Ader, France Jean-Noël, Périé ([email protected]), Université de Toulouse, Institut Clément Ader, France Florian, Bugarin ([email protected]), Université de Toulouse, Institut Clément Ader, France Laurent, Robert ([email protected]), Université de Toulouse, Institut Clément Ader, France 15h00 7121 | Digital Image Correlation and Thermography analysis of notched CFRP under tension Serra Joel ([email protected]), Institut Clément Ader, France Bouvet Christophe ([email protected]), Institut Clément Ader, France Castanié Bruno ([email protected]), Institut Clément Ader, France Petiot Caroline ([email protected]), Airbus Group Innovation, France 15h20 7123 | Discrete Ply Modelling analysis of notched CFRP under tension Serra Joel ([email protected]), Institut Clément Ader, France Bouvet Christophe ([email protected]), Institut Clément Ader, France Castanié Bruno ([email protected]), Institut Clément Ader, France Petiot Caroline ([email protected]), Airbus Group Innovation, France

91

Thursday 18 June Room NUX

Session General | Chairs: Emdad, Reza ([email protected]), Swinburne University, Australia And Zahr Viñuela, Jorge ([email protected]), UC3M, Spain 11h00 8749 | On the use of the Anisotropic Yield Criterion of von Mises (1928) as a yield condition for Particle Reinforced Composites. A calibration procedure based on numerical analysis of multi-particle cells Zahr Viñuela, Jorge ([email protected]), UC3M, Spain Pérez-Castellanos, J.L. ([email protected]), UC3M, Spain 11h20 8569 | Facile fabrication of graphene nanoribbon/silicone rubber nanocomposite as a conductive elastomer Gan, Lu ([email protected]), The Hong Kong Polytechnic University, Hong Kong Shang, Songmin ([email protected]), The Hong Kong Polytechnic University, Hong Kong Yuen, Chun Wah Marcus ([email protected]), The Hong Kong Polytechnic University, Hong Kong Jiang, Shouxiang ([email protected]), The Hong Kong Polytechnic University, Hong Kong 11h40 8704 | Experimental Investigation of Mechanical Properties of Al 2014 – SiCp Composites subjected to ECAP Processing Dhanalakshmi .S ([email protected]), Combat Vehicles Research & Development Establishment, DRDO, AVADI – 600 054., India Jaivignesh .M ([email protected]), Anna University, Chennai – 600 025., India Suresh Babu .A ([email protected]), Anna University,Chennai – 600 025., India Shanmuga Sundaram .K ([email protected]), Anna University, Chennai – 600 025., India 12h00 8994 | Effect of Initial damage on CFRP retrofitted centre-notched steel plates Emdad, Reza ([email protected]), Swinburne University, Australia Al-Mahaidi, Riadh ([email protected]), Swinburne University, Australia

iccs18 program mod - mercaturaevents.mercatura.pt/iccs18/iccs18_program_mod.pdf · ! 1! iccs18...

Documents