ideal-tek s.a. - rs components

CatalogueEngineered Handtools

Switzerland

ideal-tek s.a.manufacturer of high precision tools and instruments

ideal - tek s.a.1

Ideal-Tek s.a. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Tool Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

HIGH PRECISION & ULTRA FINE TWEEZERS

. High Precision & Ultra Fine Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

. Reverse Action Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

. Super Slim Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

. Ergonomic Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

. Flat Tip Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

. ESD Safe Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

. Ceramic Replaceable Tip Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

. Ceramic Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

GENERAL PURPOSE TWEEZERS

. General Purpose Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

. Soldering Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

. Strong Blunt Tip Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

ESD CONDUCTIVE TWEEZERS

. Fibre Replaceable Tip Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

. Fibre Tip Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

. Soft Tip Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

. Synthetic Fibre Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

SPECIAL DESIGN TWEEZERS

. Optoelectronic Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

. SMD Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

. Wafer Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. Component Positioning Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

. Nickel Plated Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Index

2

IDEAL-TEK, founded in 1965, is a Swiss companymanufacturing high quality hand-tools.

Also manufactured are ceramic and engineeringplastics tip tweezers. The entire marketing program includes desoldering tools, desolderingbraid, vacuum pick-up kits and PC-board accessories.

Ideal-tek's successful record is due to a numberof factors: popular and high quality products, awidespread and highly effective distribution network and a collaborative, synergetic andmutually beneficial relationship with distributors.

High productivity at all levels is achieved bygiving human resources the best possible support in terms of office and manufacturingequipment.

Our investments continually focus on researchand development of new solutions andapplications.

Apart from a perfect tip alignment, surface finish is extremely important: the paddles ortips must have smooth edges and be highlypolished and totally free of scratches or markswhich could damage the components or theboard itself. Saving money on tools is anexpensive mistake because so much is atstake: quality comes first. Certified ISO 9002since 1994.

Human approach and personal contact havealways been the subject of special attention inthe company's relations with customers andsuppliers.

ideal-tek s.a. Chiasso, Switzerland

ideal - tek s.a.

ideal - tek s.a.

3

0 . . . . . . . . . . . . . . . . . . . . . . . 500 . . . . . . . . . . . . . . . . . . . . . . 5000 . . . . . . . . . . . . . . . . . . . . 500B . . . . . . . . . . . . . . . . . . . . 500CF . . . . . . . . . . . . . . . . . . 1300CFR . . . . . . . . . . . . . . . . 1300D . . . . . . . . . . . . . . . . . . . . 500SADR . . . . . . . . . . . . . . . 90A . . . . . . . . . . . . . . . . . . . . . 50C11 . . . . . . . . . . . . . . . . . . . 50C9 . . . . . . . . . . . . . . . . . . . . 51 . . . . . . . . . . . . . . . . . . . . . . 510G . . . . . . . . . . . . . . . . . . . 511 . . . . . . . . . . . . . . . . . . . . . 5119 . . . . . . . . . . . . . . . . . . . 11119A . . . . . . . . . . . . . . . . . 11119L . . . . . . . . . . . . . . . . . . 1112 . . . . . . . . . . . . . . . . . . . . . 5120 . . . . . . . . . . . . . . . . . . . 11120A . . . . . . . . . . . . . . . . . 11121 . . . . . . . . . . . . . . . . . . . 11121M . . . . . . . . . . . . . . . . . 11122 . . . . . . . . . . . . . . . . . . . 11123 . . . . . . . . . . . . . . . . . . . 11124 . . . . . . . . . . . . . . . . . . . 11125 . . . . . . . . . . . . . . . . . . . . 9125A . . . . . . . . . . . . . . . . . . 9126 . . . . . . . . . . . . . . . . . . . . 9127 . . . . . . . . . . . . . . . . . . . . 9128 . . . . . . . . . . . . . . . . . . . . 9152 . . . . . . . . . . . . . . . . . . . . 515A . . . . . . . . . . . . . . . . . . . . 515AFW . . . . . . . . . . . . . . . . 515AGW . . . . . . . . . . . . . . . . 515AGWDR . . . . . . . . . . . . 915ANW . . . . . . . . . . . . . . . . 515AP . . . . . . . . . . . . . . . . . . 515ASW . . . . . . . . . . . . . . . . 62 . . . . . . . . . . . . . . . . . . . . . . 6231 . . . . . . . . . . . . . . . . . . . 11242CFR . . . . . . . . . . . . . . 13246CFR . . . . . . . . . . . . . . 13248CF . . . . . . . . . . . . . . . 13249CF . . . . . . . . . . . . . . . 13249CFR . . . . . . . . . . . . . . 13250CF . . . . . . . . . . . . . . . 14251 . . . . . . . . . . . . . . . . . . . 14252 . . . . . . . . . . . . . . . . . . . 14253 . . . . . . . . . . . . . . . . . . . 14254 . . . . . . . . . . . . . . . . . . . 14255 . . . . . . . . . . . . . . . . . . . 14256 . . . . . . . . . . . . . . . . . . . 14257 . . . . . . . . . . . . . . . . . . . 14258 . . . . . . . . . . . . . . . . . . . 14259CF . . . . . . . . . . . . . . . 14259CFR . . . . . . . . . . . . . . 1326 . . . . . . . . . . . . . . . . . . . . . . 6269CF . . . . . . . . . . . . . . . 1427 . . . . . . . . . . . . . . . . . . . . . 6

29 . . . . . . . . . . . . . . . . . . . . 1229D . . . . . . . . . . . . . . . . . . 122A . . . . . . . . . . . . . . . . . . . . . 62AB . . . . . . . . . . . . . . . . . . . 62ACF . . . . . . . . . . . . . . . . 142ACFR . . . . . . . . . . . . . . . 132AMZ . . . . . . . . . . . . . . . . 102ASADR . . . . . . . . . . . . . . 92AX . . . . . . . . . . . . . . . . . . . 72AXCFR . . . . . . . . . . . . . 132AZ . . . . . . . . . . . . . . . . . . . 62CF . . . . . . . . . . . . . . . . . . 142W . . . . . . . . . . . . . . . . . . . 182WF . . . . . . . . . . . . . . . . . . 182WFG . . . . . . . . . . . . . . . . 182WL . . . . . . . . . . . . . . . . . . 183 . . . . . . . . . . . . . . . . . . . . . . 630 . . . . . . . . . . . . . . . . . . . . 1230D . . . . . . . . . . . . . . . . . . 1231 . . . . . . . . . . . . . . . . . . . . 12321 . . . . . . . . . . . . . . . . . . . 1133A . . . . . . . . . . . . . . . . . . . . 934A . . . . . . . . . . . . . . . . . . . . 935A . . . . . . . . . . . . . . . . . . . . 935AP . . . . . . . . . . . . . . . . . 1835B . . . . . . . . . . . . . . . . . . 1835S . . . . . . . . . . . . . . . . . . 1836A . . . . . . . . . . . . . . . . . . . . 936AP . . . . . . . . . . . . . . . . . 1837S . . . . . . . . . . . . . . . . . . 1838FG . . . . . . . . . . . . . . . . . 18391 . . . . . . . . . . . . . . . . . . . 1839FG . . . . . . . . . . . . . . . . . 1839S2 . . . . . . . . . . . . . . . . . 1839S3 . . . . . . . . . . . . . . . . . 183C . . . . . . . . . . . . . . . . . . . . . 63CB . . . . . . . . . . . . . . . . . . . 63CCF . . . . . . . . . . . . . . . . 143CF . . . . . . . . . . . . . . . . . . 143CFR . . . . . . . . . . . . . . . . 133CSADR . . . . . . . . . . . . . . 93F . . . . . . . . . . . . . . . . . . . . . 63SADR . . . . . . . . . . . . . . . . 93W . . . . . . . . . . . . . . . . . . . 183WF . . . . . . . . . . . . . . . . . . 183WFG . . . . . . . . . . . . . . . . 183WL . . . . . . . . . . . . . . . . . . 183X . . . . . . . . . . . . . . . . . . . . . 73XCF . . . . . . . . . . . . . . . . 144 . . . . . . . . . . . . . . . . . . . . . . 641W . . . . . . . . . . . . . . . . . . 1942W . . . . . . . . . . . . . . . . . . 1942WF . . . . . . . . . . . . . . . . 1942WFG . . . . . . . . . . . . . . 1943W . . . . . . . . . . . . . . . . . . 1943WF . . . . . . . . . . . . . . . . 1943WFG . . . . . . . . . . . . . . 19444W . . . . . . . . . . . . . . . . 1944W . . . . . . . . . . . . . . . . . . 19

44WF . . . . . . . . . . . . . . . . 1944WFG . . . . . . . . . . . . . . 19456 . . . . . . . . . . . . . . . . . . . 1145W . . . . . . . . . . . . . . . . . . 1945WF . . . . . . . . . . . . . . . . 1946W . . . . . . . . . . . . . . . . . . 1946WF . . . . . . . . . . . . . . . . 1946WFG . . . . . . . . . . . . . . 19475 . . . . . . . . . . . . . . . . . . . 1148WF . . . . . . . . . . . . . . . . 194A . . . . . . . . . . . . . . . . . . . . . 64W . . . . . . . . . . . . . . . . . . . 194WF . . . . . . . . . . . . . . . . . . 194WFG . . . . . . . . . . . . . . . . 194WL . . . . . . . . . . . . . . . . . . 194X . . . . . . . . . . . . . . . . . . . . . 75 . . . . . . . . . . . . . . . . . . . . . . 650 . . . . . . . . . . . . . . . . . . . . . 951S . . . . . . . . . . . . . . . . . . . . 652A . . . . . . . . . . . . . . . . . . . . 655A . . . . . . . . . . . . . . . . . . 2155AC4 . . . . . . . . . . . . . . . 1555AC5 . . . . . . . . . . . . . . . 1555ACX4 . . . . . . . . . . . . . . 1555ACX5 . . . . . . . . . . . . . . 1555AX . . . . . . . . . . . . . . . . . 2155WFL . . . . . . . . . . . . . . . 1956A . . . . . . . . . . . . . . . . . . 2156AX . . . . . . . . . . . . . . . . . 2156WFL . . . . . . . . . . . . . . . 19571 . . . . . . . . . . . . . . . . . . . 21572 . . . . . . . . . . . . . . . . . . . 21573 . . . . . . . . . . . . . . . . . . . 21574 . . . . . . . . . . . . . . . . . . . 12574A . . . . . . . . . . . . . . . . . 12574B . . . . . . . . . . . . . . . . . 12577 . . . . . . . . . . . . . . . . . . . 21578 . . . . . . . . . . . . . . . . . . . 21579 . . . . . . . . . . . . . . . . . . . 2157A . . . . . . . . . . . . . . . . . . 12581 . . . . . . . . . . . . . . . . . . . 21582 . . . . . . . . . . . . . . . . . . . 21583 . . . . . . . . . . . . . . . . . . . 2158A . . . . . . . . . . . . . . . . . . 2158WFL . . . . . . . . . . . . . . . 1959A . . . . . . . . . . . . . . . . . . 215A . . . . . . . . . . . . . . . . . . . . . 65AX . . . . . . . . . . . . . . . . . . . 75B . . . . . . . . . . . . . . . . . . . . . 65C . . . . . . . . . . . . . . . . . . . . . 65CCF . . . . . . . . . . . . . . . . 145CFR . . . . . . . . . . . . . . . . 135SADR . . . . . . . . . . . . . . . . 95TTH . . . . . . . . . . . . . . . . . . 65TTHX . . . . . . . . . . . . . . . . 75WF . . . . . . . . . . . . . . . . . . 205WL . . . . . . . . . . . . . . . . . . 205X . . . . . . . . . . . . . . . . . . . . . 75XCF . . . . . . . . . . . . . . . . 14

5XCFR . . . . . . . . . . . . . . . 136 . . . . . . . . . . . . . . . . . . . . . . 660 . . . . . . . . . . . . . . . . . . . . . 8600M . . . . . . . . . . . . . . . . . 2061A . . . . . . . . . . . . . . . . . . 2162A . . . . . . . . . . . . . . . . . . . . 6637L . . . . . . . . . . . . . . . . . 20637S . . . . . . . . . . . . . . . . . 20637SB . . . . . . . . . . . . . . . 20640B . . . . . . . . . . . . . . . . . 20646 . . . . . . . . . . . . . . . . . . . 11647 . . . . . . . . . . . . . . . . . . . 11648 . . . . . . . . . . . . . . . . . . . 11649 . . . . . . . . . . . . . . . . . . . 1164A . . . . . . . . . . . . . . . . . . . . 8650 . . . . . . . . . . . . . . . . . . . 1165A . . . . . . . . . . . . . . . . . . . . 866 . . . . . . . . . . . . . . . . . . . . . 8666A . . . . . . . . . . . . . . . . . 20667 . . . . . . . . . . . . . . . . . . . 206WF . . . . . . . . . . . . . . . . . . 206WL . . . . . . . . . . . . . . . . . . 207 . . . . . . . . . . . . . . . . . . . . . . 6702A . . . . . . . . . . . . . . . . . 15707 . . . . . . . . . . . . . . . . . . . 15708 . . . . . . . . . . . . . . . . . . . 15709 . . . . . . . . . . . . . . . . . . . 15710 . . . . . . . . . . . . . . . . . . . 1571MZ . . . . . . . . . . . . . . . . 1072MZ . . . . . . . . . . . . . . . . 107312 . . . . . . . . . . . . . . . . . 127313 . . . . . . . . . . . . . . . . . 127314 . . . . . . . . . . . . . . . . . 127314B . . . . . . . . . . . . . . . . 127316 . . . . . . . . . . . . . . . . . 127318 . . . . . . . . . . . . . . . . . 127320 . . . . . . . . . . . . . . . . . 127325 . . . . . . . . . . . . . . . . . 127330 . . . . . . . . . . . . . . . . . 1273MZ . . . . . . . . . . . . . . . . 1074MZ . . . . . . . . . . . . . . . . 10771 . . . . . . . . . . . . . . . . . . . . 6773 . . . . . . . . . . . . . . . . . . . . 6775 . . . . . . . . . . . . . . . . . . . 11777 . . . . . . . . . . . . . . . . . . . . 67A . . . . . . . . . . . . . . . . . . . . . 67B . . . . . . . . . . . . . . . . . . . . . 77E . . . . . . . . . . . . . . . . . . . . . 77MZ . . . . . . . . . . . . . . . . . . 107SADR . . . . . . . . . . . . . . . . 97X . . . . . . . . . . . . . . . . . . . . . 78 . . . . . . . . . . . . . . . . . . . . . . 78501 . . . . . . . . . . . . . . . . . 108501FGG . . . . . . . . . . . . 108507 . . . . . . . . . . . . . . . . . 1085B . . . . . . . . . . . . . . . . . . 2085C . . . . . . . . . . . . . . . . . . 208WF . . . . . . . . . . . . . . . . . . 208WNY . . . . . . . . . . . . . . . . 20

96 . . . . . . . . . . . . . . . . . . . . 20A . . . . . . . . . . . . . . . . . . . . . . 7AA . . . . . . . . . . . . . . . . . . . 21AASADR . . . . . . . . . . . . . . 9AASA . . . . . . . . . . . . . . . . 11AB . . . . . . . . . . . . . . . . . . . . . 7AC . . . . . . . . . . . . . . . . . . . . 7AM . . . . . . . . . . . . . . . . . . . . 7BB . . . . . . . . . . . . . . . . . . . 21D . . . . . . . . . . . . . . . . . . . . . 11DF . . . . . . . . . . . . . . . . . . . 11DM . . . . . . . . . . . . . . . . . . . 12DS . . . . . . . . . . . . . . . . . . . 12DSA . . . . . . . . . . . . . . . . . . 7E00 . . . . . . . . . . . . . . . . . . . . 8E2A . . . . . . . . . . . . . . . . . . . 8E3 . . . . . . . . . . . . . . . . . . . . . 8E5 . . . . . . . . . . . . . . . . . . . . . 8E7 . . . . . . . . . . . . . . . . . . . . . 8F . . . . . . . . . . . . . . . . . . . . . . 7GG . . . . . . . . . . . . . . . . . . . 21GGSA . . . . . . . . . . . . . . . . 12H . . . . . . . . . . . . . . . . . . . . . . 7MM . . . . . . . . . . . . . . . . . . . 21MMSA . . . . . . . . . . . . . . . 12P . . . . . . . . . . . . . . . . . . . . . . 7PB . . . . . . . . . . . . . . . . . . . 11RR . . . . . . . . . . . . . . . . . . . 21RRSA . . . . . . . . . . . . . . . . 12S . . . . . . . . . . . . . . . . . . . . . . 7SM100 . . . . . . . . . . . . . . . 16SM101 . . . . . . . . . . . . . . . 16SM102 . . . . . . . . . . . . . . . 16SM103 . . . . . . . . . . . . . . . 16SM104 . . . . . . . . . . . . . . . 16SM105 . . . . . . . . . . . . . . . 16SM106 . . . . . . . . . . . . . . . 16SM107 . . . . . . . . . . . . . . . 16SM108 . . . . . . . . . . . . . . . 16SM108X . . . . . . . . . . . . . . 16SM109 . . . . . . . . . . . . . . . 16SM110 . . . . . . . . . . . . 15/16SM111 . . . . . . . . . . . . 15/16SM111X . . . . . . . . . . . 15/16SM112 . . . . . . . . . . . . . . . 17SM113 . . . . . . . . . . . . . . . 17SM114 . . . . . . . . . . . . . . . 17SM115 . . . . . . . . . . . . 15/17SM116 . . . . . . . . . . . . 15/17SM117 . . . . . . . . . . . . . . . 17SM2 . . . . . . . . . . . . . . . . . . 17SM3 . . . . . . . . . . . . . . . . . . 17SP4T . . . . . . . . . . . . . . . . . 20SP5T . . . . . . . . . . . . . . . . . 20SP6T . . . . . . . . . . . . . . . . . 20SS . . . . . . . . . . . . . . . . . . . . . 8SS6 . . . . . . . . . . . . . . . . . . . 8SSL . . . . . . . . . . . . . . . . . . . 8

Tool Index

Part. no. P a g e Part. no. P a g e Part. no. P a g e Part. no. P a g e Part. no. Page

ideal - tek s.a.

4

Steel and nonferrous alloys AL Aluminium alloy

Anticorodal 110

BR Brass

CA Stainless, low carbon austenitic steel

N Nonferrous alloy, Nickel silver 68-15

PB Nonferrous alloy, Phosphor bronze

S Stainless steel, martensitic higher carbon steel

SA Stainless steel, low carbon austenitic steel

TA Nonferrous alloy, Titanium Grade 1 (unalloyed titanium)

CoatingsTE Teflon

Superior antiscratch non-stick material. Insulative. Very high corrosion resistance. Continuous use temp. 260°C (500°F).

EP EpoxyGood electrical insula-tion and resistance to chemicals. Antiglare. Continuous use temp. 150°C (300°F).

NE Conductive epoxygood resistance to chemicals antiglare; continuous use temp. 150°C (300°F)

GP Gold PlatingVery high corrosion resistance. Smooth, antiscratch, antiglare, no tarnish finish

NP Nickel PlatingSuperior corrosion resistance to saltwater, alkalies and organic acids.

CR Chromium platingGood corrosion resistance to ambient atmosphere.

DR Soft cushion grip staticdissipative (ESDsafe). NBR vulcanized rubber

PB Polished and burnished

Engineering plasticsCF PA66/CF30

polyamide 66 reinforcedwith 30 wt% carbon fibre

DL POM/GF30 acetal resin reinforced with30 wt% glass fibre

RF PET/GF30 polyethylene terephtalate reinforced with 30 wt% glass fibre

LR PPS/GF30 polyphenylene sulfide reinforced with 30 wt% glass fibre

NY PA66/GF30 polyamide 66 reinforced with 30 wt%glass fibre

SV PVDF polyvinylidenefluoride carbon fiber reinforced

HC POM/CF acetal resin carbon fibre modified

CeramicMZ Zirconia toughened

alumina (ZTA) Non-porous, superior toughness, corrosion and heat resistance. Insulative.

ZrO2 Stabilized zirconia (PSZ) Non-porous, superior toughness, corrosion and heat resistance. Insulative.

Code explanation

XXXXXX YY ZZup to 6 digits 2 letters 2 letterspart code handle material coating

Example: 2ASAEP2A tweezer in antimagnetic stainless steel with epoxy coating

Part code explanation for Fibre Tip and Ceramic Tip Tweezer

XXX XX Xup to 3 digits 2 letter R for replaceabletweezer type tip material

Example: 2ACFR2A tweezer with replaceable PA66/CF30 fibre tip

Materials

ideal - tek s.a.

5

0 4 3/4'' 120 mmflat edges, fine

00 4 3/4'' 120 mmflat edges, thick

0004 3/4''120 mm

Same as 00 withradiused edges

0C93 1/2'' 90 mmFlat edges, fine,short

00B 4 3/4'' 120 mm Same as 00 withserrated grips

00D4 3/4'' 120 mmSame as 00, serrated tips andgrips

0 A4 3/4'' 120 mmSame as 0 withradiused outsideegdes fine tips

0C114 1/4'' 110 mmFlat edges, fine,short

14 3/4'' 120 mmAccurate, strong

10G4 1/4'' 110 mmFine tips, generalpurpose tweezer

11 4 3/4'' 120 mmNickel: strong tips

15AP 4 1/2'' 115 mmFor cutting hairsprings

12 4 3/4'' 120 mmNickel: fine tips

1523 3/4'' 98 mmMiniature cutting tweezer

15A 4 1/2'' 115 mmFor cutting hairsprings

15AFW4 1/2'' 115 mm

For cutting hairsprings

15ANW4 1/2'' 115 mm

For cutting hairsprings

Handcrafted to perfect tip symmetry and balance, polishededges, superior no-scratch/antiglare satin finish.

carbon, stainless or antimagnetic/antiacid steel

15AGW4 1/2'' 115 mmFor cutting hairsprings

High Precision & Ultra Fine Tweezers


ideal - tek s.a.

6


5 C4 1/2'' 115 mmDouble bent tips

5TTH4 1/4'' 110 mmAnticapillary extrafine tweezer withlock-ring for han-dling electronicmicroscope grids

64 1/2'' 115 mmFine angled tips

7 A4 1/2'' 115 mmStrong

62A4 3/4” 120 mmFlat, blunt tips

74 1/2'' 115 mmFine curved tips

7714 1/2'' 115 mmGrooved tips fortiny wires and tubes

7735 1/2'' 140 mmSpecial design forbetter visibility

7774 1/2'' 115 mmImproved visibilityfor holding tinywires

15ASW 4 1/2'' 115 mmFor cutting hairsprings

2 4 3/4'' 120 mmStrong, sharp tips

26 5 1/4'' 135 mmVery strong, sharptips

3C4 1/4'' 110 mmVery sharp andsuperior finish

27 5 1/4'' 135 mmStrong, fine tips

2 A4 3/4'' 120 mmFlat, round tips

2AB 4 3/4'' 120 mmTips as 2A butcurved

2AZ4 3/4'' 120 mmTips as 2A but "Z"-shaped

34 3/4'' 120 mmVery sharp andsuperior finish

3CB4 1/4'' 110 mmSame as 3C withbent tips

3F4 3/4'' 120 mmTips touching over3 mm for holdingtiny wires

44 1/4'' 110 mmExtra fine tips

5 B4 1/4'' 110 mmBent tips, max. visibility

4A4 1/4'' 110 mmStronger

54 1/4'' 110 mmExtra fine tips

51S4 1/2'' 115 mmExtra fine tips forminiature assembly

52A4 3/4'' 120 mmCrush proof, smoothaction design

5 A4 1/2'' 115 mmExtra fine tips

ideal - tek s.a.

7

7 B4 1/2'' 115 mmSerrated tips

7 E4 1/2'' 115 mmFlat edges

84 3/4'' 120 mmFor straighteningwires

F4 3/4'' 120 mmFor flattening hands

A4 3/4'' 120 mmStrong, precisiontips

A B4 3/4'' 120 mmSerrated grips

A C4 1/4'' 110 mmVery strong tips,serrated grips

A M4 3/4'' 120 mmAnti-sparking allbrass tweezer

DSA4 1/4'' 110 mmStrong flat

H3 1/2'' 90 mmDovetailed tips,fine

P4 3/4'' 120 mm

S4 3/4” 120 mmSimple fine tips

2AX4 3/4'' 120 mmStyle 2A

3 X4 3/4'' 120 mmStyle 3

7 X4 1/2'' 115 mmStyle 7

4 X4 1/4'' 110 mmStyle 4

5AX4 1/2'' 115 mmStyle 5A

5TTHX4 1/4'' 110 mmStyle 5TTHAnticapillary extrafine tips

5 X4 1/4'' 110 mmStyle 5Extra fine tips

Specially intended for applications where a high precise self-closing action is required (e.g. microscopy). Extra fine tips or other models available on request.

Finest stainless/antimagnetic steel

Reverse Action Tweezers


ideal - tek s.a.

8


E00SA AL5 1/3'' 136 mmflat edges, thick

E2ASA AL5 1/3'' 136 mmFlat, round tips

E3SA AL5 1/3'' 136 mmVery sharp andsuperior finish

E5SA AL5 1/3'' 136 mmExtra fine tips

E7SA AL5 1/3'' 136 mmFine curved tips

Ultra light weight and very softtension. Provide relief from handfatigue and Carpal TunnelSyndrome. 5 different styles: aluminium handle with high precision SA Tips.

6 05 1/2'' 140 mmRelieved tips

64A5 1/2'' 140 mmBent round tips

65A5 1/2'' 140 mmLong, fine curvedtips

SSL6'' 150 mmLong, ergonomicshape

6 65 1/2'' 140 mmLong, double benttips

S S5 1/2'' 140 mm

SS66'' 150 mm

Long and slender tweezers for multiple precision applications especially suitable for working near heat sources

30% Less Weight, 50% LessTension

Ergonomic Tweezers

Super Slim Series

ideal - tek s.a.

9

1254 3/4'' 120 mmSmooth tips, noscratch

125A4 3/4'' 120 mmSame as 125 butelongated tips

34A4 3/4'' 120 mmSmooth to hold deli-cate parts

1264 1/4'' 110 mmRound, flat tips

1274'' 105 mmThin, square tips

1284'' 105 mmSame as 127 butbent tips

33A4 1/2'' 115 mmFlat round tips

35A4 3/4'' 120 mmSame use as 34A

36A4 3/4'' 120 mmSame use as 34Aand 35A

5 04 3/4'' 120 mmFlat narrow tips

Serrated grips.

Stainless orantimagnetic/antiacid steel

00SADR4 3/4'' 120 mmflat edges, thick

2ASADR4 1/2'' 115 mmStrong, sharp tips

3CSADR4 3/8'' 110 mmVery sharp andsuperior finish

3SADR4 3/4'' 120 mmVery sharp andsuperior finish

5SADR4 3/8'' 110 mmExtra fine tips

7SADR4 1/2'' 115 mmFine curved tips

Soft ESD cushion grips (resistivity 10E8 ohm).Protected design (mod. dep. 126848). Ergonomically designed.

15AGWDR4 1/2” 115 mm For cutting hairspings

AASADR5” 130 mm

ESD Safe Tweezers

Flat Tip Tweezers


ideal - tek s.a.

10


2AMZA: 35 mm 1.4''B: 2.0 mm 0.08''C: 0.6 mm 0.02''

73MZA: 33 mm 1.3''B: 0.3 mm 0.011''C: 0.6 mm 0.02''

71MZA: 30 mm 1.2''B: 0.3 mm 0.011''C: 0.3 mm 0.011''

72MZA: 30 mm 1.2''B: 0.2 mm 0.007''C: 0.4 mm 0.016''

74MZA: 40 mm 1.6''B: 0.5 mm 0.019''C: 0.5 mm 0.019''

8501Straight, tips 1mm,serrated5” 125 mm

8507Curved, shape of 7A,fine tips, smooth5” 125 mm

8501FGGStraight, very finetips, smooth5” 125 mm

Zirconia ceramic precision tips.Surface resistivity 10E12 Ohm.Contamination free, high temperature (1000°C) wear andsolder resistant.Aluminium Handle

Patent Pending No 1750/97,Alignable replaceable tips

Best for working with acid (except HF), for SMD, solder pot,high temperature exposure. Clean room approved.Can be sterilized. Solder repellent.

Patent Pending Patent Pending

7MZA: 43.5 mm 1.7”B: 0.6 mm 0.02”C: 0.6 mm 0.02”

Ceramic Tip Tweezers

Ceramic Tweezers

ideal - tek s.a.

11


1196'' 150 mmFine Tips

121M6 1/4'' 160 mmSame as 121 butthinner tips

119A6'' 150 mmSame as 119 butstronger tips

119L7'' 180 mmLong, strong

1206'' 150 mmStrong tips

120A4 1/4'' 110 mmShort with fine, stur-dy tips

1216 1/4'' 160 mmVery strong, blunttips

1226'' 150 mmFine, bent tips

1236'' 150 mmFine, double-benttips

1246'' 150 mmSame as 122 butstronger tips

6466'' 150 mm

2314 3/4'' 120 mm

3214 3/4'' 120 mm

4565'' 130 mmSerrated tips forelectronic assembly

4755 1/2'' 140 mm

6474 3/4'' 120 mm

6486'' 150 mm

6496'' 150 mm

Very accurate finish for a great variety of applications fromelectronics to dentistry and anatomy. Extremely accurate serration quality. Different lengths, thicknesses and angles for every application.

Stainless or antimagnetic/antiacid steel

General Purpose Tweezers

6506'' 150 mm

7756 1/8'' 155 mmPVC coatedhandles

AASA5'' 130 mm

D3 3/4'' 94 mm

D F6 1/4'' 160 mm

P B5 3/4'' 145 mmdiam. 0.145” 3.6 mmsmaller diametersavailable

ideal - tek s.a.

12


D M6'' 150 mm

D S7 1/4'' 185 mm

GGSA5'' 130 mm

MMSA5'' 130 mm

RRSA5 3/4'' 145 mm

2 96 1/2'' 165 mm

29D6'' 150 mm

574A5 3/4'' 145 mm

3 06'' 150 mm

30D6'' 150 mm

3 14 3/4'' 120 mm

5745 3/4'' 145 mm

574B5 3/4'' 145 mm90° bent tips

57A5 1/2'' 140 mmChromplated

Confortable and precision handling of electronics componentsfor soldering and desoldering operations.

Antimagnetic/antiacid steel

73145'' 130 mm

7314B5” 130 mm

Available in straight or bent (suffix B) version. Various lengths(12-30 cm). Serrated for very firm hold.

Nickelplated. Stainless or antimagnetic/antiacid steel

7312 4 3/4” 120 mm7313 5” 130 mm7314 5 1/2” 140 mm7316 6 1/4 160 mm7318 7 1/4” 180 mm7320 7 3/4” 200 mm7325 9 3/4” 250 mm7330 12” 300 mm

Strong Blunt Tweezers

Soldering Tweezers

ideal - tek s.a.

13


00CFRA 130 mm 5 1/8”B 1.0 mm 0.04”C 2.4 mm 0.09”

249CFRA 130 mm 5 1/8”B 2.2 mm 0.09”C 2.5 mm 0.10”For glass diodes

242CFRA 130 mm 5 1/8”B 1.45 mm 0.06”C 1.0 mm 0.04”

246CFRA 125 mm 4 7/8”B 0.6 mm 0.04”C 0.6 mm 0.09”D 9.6 mm 0.4”E 45°

259CFRA 130 mm 5 1/8”B 0.6 mm 0.02”C 1.0 mm 0.04”

2ACFRA 130 mm 5 1/8”B 1.8 mm 0.07”C 0.6 mm 0.02”

2AXCFRA 125 mm 4 7/8”B 1.8 mm 0.07”C 0.6 mm 0.02”

3CFRA 130 mm 5 1/8”B 0.8 mm 0.03”C 1.6 mm 0.06”

5CFRA 130 mm 5 1/8”B 0.6 mm 0.02”C 0.6 mm 0.02”

5XCFRA 115 mm 4 1/2”B 0.6 mm 0.02”C 0.6 mm 0.02”

Handles in antimagnetic steel.Different styles and configurations.Special design on request.

Different material available. Look under Material 'Engineeringplastics' section

Fibre Replaceable Tip Tweezers

Fibre Tip Tweezers

Handles in antimagnetic steel. Different stylesand configurations. Special design on request.

Different material available. Look underMaterial 'Engineering plastics' section

00CFA 130 mm 5 1/8”B 1.0 mm 0.04”C 2.4 mm 0.09”

248CFA 130 mm 5 1/8”B 1.0 mm 0.04”C 2.4 mm 0.09”For ceramic substrates

249CFA 130 mm 5 1/8”B 2.2 mm 0.09”C 2.5 mm 0.10”For glass diodes

2ABCFRA 125 mm 4 7/8”B 1.8 mm 0.07”C 0.6 mm 0.02”

7CFRA 125 mm 4 7/8”B 0.6 mm 0.02”C 1.0 mm 0.04”

ideal - tek s.a.

14


250CFA 130 mm 5 1/8”B 10 mm 3/8”For glass diodes

259CFA 130 mm 5 1/8”B 1.0 mm 0.02”C 2.4 mm 0.04”

269CFA 130 mm 5 1/8”B 3 mm 0.012”

2ACFA 130 mm 5 1/8”B 1.8 mm 0.07”C 0.6 mm 0.02”

2CFA 130 mm 5 1/8”B 1.8 mm 0.03”C 0.6 mm 0.05”

3CCFA 105 mm 4 1/8”B 1.8 mm 0.03”C 0.6 mm 0.05”

3CFA 130 mm 5 1/8”B 0.8 mm 0.03”C 1.6 mm 0.06”

3XCF A 115 mm 4 1/2”B 0.6 mm 0.02”C 0.6 mm 0.02”

5CCFA 105 mm 4 1/8”B 0.6 mm 0.02”C 0.6 mm 0.02”

5XCFA 115 mm 4 1/2”B 0.6 mm 0.02”C 0.6 mm 0.02”

2514 1/4“ 110 mm

2544 1/4“ 110 mm

2524 1/4“ 110 mm

2534 1/4“ 110 mm

2574 1/4“ 110 mm

2554 1/4“ 110 mm

2564 1/4“ 110 mm

2584 1/4“ 110 mm

Soft, conductive carbon fibre tips for handling of delicate components e.g.Ceramic devices, SMD, wafers. Fully antimagnetic, antiacid and ESD safe.Special tip designs available on request.

Soft Tip Tweezers

ideal - tek s.a.

15

702A4 5/8'' 116 mm

7084 3/8'' 110 mm

7104 5/8'' 116 mm

7074 1/2'' 114 mm

7094 3/8'' 116 mm

Precision synthetic fibre tweezer.

Different materials available.Look under Material 'Engineering plastics' section

Synthetic Fibre Tweezers

55AC44 3/8” 111 mm., diam. 0.07” 1.8 mm

55AC54 3/8” 111 mm, diam. 0.04” 1 mm

55ACX44 3/8” 111 mm, diam. 0.07” 1.8 mm

55ACX54 3/8” 111 mm, diam. 0.04” 1 mm

SM1104 3/4” 120 mm, diam. 0.04” 1 mm

SM111X4 3/4” 120 mm, diam. 0.04” 1 mm

SM1154 3/4” 120 mm, diam. 0.04” 1 mm

SM1164 3/4” 120 mm, diam 0.04” 1 mm

SM1114 3/4” 120 mm, diam. 0.04” 1 mm

Confortable handling and positioning of fibreoptic and micro-optical components


Optoelectronic Tweezers


ideal - tek s.a.

16


SM1094 3/4'' 120 mmSame as SM108 but with 45° tipsand without anti-crush feature

SM1104 3/4'' 120 mmFor positioning monolithic chipcapacitors. Grooved tips.

SM108X4 3/4'' 120 mmFor positioning and soldering 1mm wide components. Tips aregrooved inside.

SM1054 3/4'' 120 mmSpecial design for positioning allSOT packages vertically

SM1084 3/4'' 120 mmFor positioning and soldering 1mm wide components. Tips aregrooved inside.

SM1074 3/4'' 120 mmFor positioning all flat devicesat 60° angle

SM1064 3/4'' 120 mmFor positioning all SOT packageshorizontally. With flat base tips (4 mm long)

SM1114 3/4'' 120 mmFor positioning 5 mm monolithicchip capacitors with flat base.Grooved tips (2 mm long).

SM111X4 3/4'' 120 mmFor positioning 5 mm monolithicchip capacitors with flat base.Grooved tips (2 mm long).

SM1004 1/2'' 115 mmReverse action for handlingPCBs with SMDs

SM1044 3/4'' 120 mmFor handling and positioning 3lead SOT packages, monolithicchip capacitors, etc.

SM1014 1/2'' 115 mmReverse action. For solderingand desoldering 8, 14 or 16lead SMDs

SM1034 1/2'' 115 mmFor handling and positioning 2and 3 lead SOT packages at45° angle

Smooth handling and positioning of all SMD components.Different tips and angles for specific jobs. Satin antiglare finishand ergonomic design. Modifications or special models availableon request. Available as reverse action model.

SM1024 1/2'' 115 mmReverse action. For soldering anddesoldering 20, 28, 44 and 68LCCC and PLCC pad devices

SMD Tweezers

ideal - tek s.a.

17

SM1164 3/4'' 120 mmGrooved straight tips. For verticalpositioning of cylindrical devices(up to 1 mm diam. or more)

SM1174 3/4'' 120 mmFor positioning SOTpackages at 30° angle

SM1154 3/4'' 120 mmGrooved tips at 30° angle for hold-ing and positioning cylindricaldevices (up to 1 mm diam.)

SM24 3/4” 120 mm45° tips

SM1134 3/4'' 120 mm3mm long tips bent at 60° angle.One forked blade for lead entry.

SM1144 3/4'' 120 mmSame as SM113 but withstraight tips for vertical holding.

SM1124 3/4'' 120 mmFor positioning 5 mm monolithicchip capacitors at 60°. Groovedtips.

SM34 3/4'' 120 mmFor positioning and soldering 1mm wide components. Tips aregrooved inside.


ideal - tek s.a.

18


2 WA 6,5 mm 0.25”B 5,0 mm 0.20”C 2,5 mm 0.10”D 4,0 mm 0.15”

2WFA 6,5 mm 0.25”B 9,0 mm 0.25”C 2,5 mm 0.10”D 4,0 mm 0.15”E 2,5 mm 0.10”

2WFGA 6,5 mm 0.25”B 9,0 mm 0.35”C 2,5 mm 0.10”D 4,0 mm 0.15”E 2,5 mm 0.10”

37SA 7,8 mm 0.30”B 6,0 mm 0.24”E 6,0 mm 0.24”

2WLA 6,5 mm 0.25”B 9,0 mm 0.35”C 2,5 mm 0.10”D 4,0 mm 0.15”E 2,5 mm 0.10”

35APA 7,0 mm 0.27”B 4,0 mm 0.15”E 4,0 mm 0.15”

35BA 12 mm 0.47”B 13 mm 0.51”D 2,5 mm 0.10”

35SA 29,0 mm 1.14”B 5,5 mm 0.20”D 3,0 mm 0.12”

36APA 6,0 mm 0.24”B 7,0 mm 0.27”E 2,0 mm 0.08”

38FGA 9,5 mm 0.37”B 11,0 mm 0.43”D 4,0 mm 0.15”E 2,5 mm 0.10”

391A 9,5 mm 0.37”B 7,5 mm 0.29”C 3,5 mm 0.14”D 4,4 mm 0.17”E 2,8 mm 0.11”

3WFGA 9,5 mm 0.37”B 10,0 mm 0.39”C 2,5 mm 0.10”D 4,0 mm 0.15”E 2,5 mm 0.10”

39FGA 12,0 mm 0.47”B 10,5 mm 0.39”D 4,0 mm 0.15”E 2,5 mm 0.10”

39S2A 6,5 mm 0.25”B 8,5 mm 0.33”D 5,5 mm 0.20”E 2,4 mm 0.09”

39S3A 9,5 mm 0.37”B 8,5 mm 0.23”D 5,5 mm 0.20”E 2,4 mm 0.09”

3 WA 9,5 mm 0.37”B 10,0 mm 0.39”C 2,5 mm 0.10”D 4,0 mm 0.15”


Especially designed for use with delicate (very fragile) silicon wafers. Very firm yet anti-crush/anti-crack grip.Very smooth surface thanks to satin finish (non-glare). Different sizes for each wafer family. Teflon coatingas well as special designs to user's specifications are available.



Wafer Tweezers

ideal - tek s.a.

19

4WFA 12,0 mm 0.47”B 9,0 mm 0.33”C 2,5 mm 0.10”D 4,0 mm 0.15”D 2,5 mm 0.10”

4WFGA 12,0 mm 0.47”B 9,0 mm 0.35”C 2,5 mm 0.10”D 4,0 mm 0.15”D 2,5 mm 0.10”

4WLA 12,0 mm 0.47”B 7,5 mm 0.29”C 3,0 mm 0.12”D 4,0 mm 0.15”D 2,5 mm 0.10”

55WFLA 16,0 mm 0.63”B 10,0 mm 0.39”D 3,5 mm 0.14”E 2,5 mm 0.10”

56WFLA 20,0 mm 0.79”B 8,0 mm 0.30”D 3,5 mm 0.14”E 2,5 mm 0.10”

58WFLA 28,5 mm 1.12”B 15,5 mm 0.61”C 2,2 mm 0.09”D 3,5 mm 0.14”E 2,5 mm 0.10”

41WA 28,0 mm 1.1”B 12,0 mm 0.47”D 5,0 mm 0.20”E 5,0 mm 0.20”

42WA 6,5 mm 0.25”B 8,5 mm 0.33”D 3,5 mm 0.14”E 2,5 mm 0.10”

444WA 12,0 mm 0.47”B 9,0 mm 0.35”D 4,0 mm 0.15”

42WFA 6,5 mm 0.25”B 8,5 mm 0.33”D 3,5 mm 0.14”E 2,5 mm 0.10”

42WFGA 6,5 mm 0.25”B 8,5 mm 0.33”D 3,5 mm 0.14”E 2,5 mm 0.10”

43WA 9,5 mm 0.37”B 8,5 mm 0.33”D 3,5 mm 0.14”E 2,5 mm 0.10”

43WFA 9,5 mm 0.37”B 8,5 mm 0.33”D 3,5 mm 0.14”E 2,5 mm 0.10”


44WA 12,0 mm 0.47”B 9,0 mm 0.35”D 3,0 mm 0.12”E 2,5 mm 0.10”

44WFA 12,0 mm 0.47”B 8,5 mm 0.33”D 3,5 mm 0.14”E 2,5 mm 0.10”


48WFA 28,0 mm 1.1”B 9,0 mm 0.35”D 4,0 mm 0.15”E 2,5 mm 0.10”

45WA 16,0 mm 0.63”B 7,5 mm 0.30”D 3,5 mm 0.14”E 2,5 mm 0.10”

45WFA 16,0 mm 0.63”B 7,5 mm 0.30”D 3,5 mm 0.14”E 2,5 mm 0.10”

46WA 20,0 mm 0.79”B 7,0 mm 0.27”D 3,5 mm 0.14”E 2,5 mm 0.10”

46WFA 20,0 mm 0.79”B 7,0 mm 0.27”D 3,5 mm 0.14”E 2,5 mm 0.10”


4 WA 12,0 mm 0.47”B 8,5 mm 0.33”C 2,5 mm 0.10”D 4,0 mm 0.15”


ideal - tek s.a.

20


667A 16 mm 0.62”B 6,3 mm 0.25”E 6,3 mm 0.25”

637SA 5,0 mm 0.20”B 1,3 mm 0.05”E 1,3 mm 0.05”

637SBA 5,0 mm 0.20”B 1,3 mm 0.05”E 1,3 mm 0.05”

640BA 5 mm 0.2”B 1 mm 0.04”E 1 mm 0.04”

666A A 9,3 mm 0.36”B 5,5 mm 0.20”



85BA 6,5 mm 0.25”B 6,0 mm 0.25”C 3,0 mm 0.12”D 4,0 mm 0.15”E 2,0 mm 0.08”

9 6A 14,5 mm 0.57”B 10,5 mm 0.41“C 9,0 mm 0.35”

85CA 7,0 mm 0.27”B 4,5 mm 0.17”C 3,0 mm 0.12”D 4,0 mm 0.15”E 2,0 mm 0.08”

8WFA 28,5 mm 1.12”B 12 mm 0.47”C 2,2 mm 0.08”D 3,5 mm 0.14”E 2,5 mm 0.10”

8WNYA 65 mm 2.55”B 19 mm 0.75”C 1,3 mm 0.05”D 2 mm 0.08”

SP4TA 12,0 mm 0.47”B 8,5 mm 0.33”D 6,5 mm 0.25”

SP5TA 16,0 mm 0.62”B 7,5 mm 0.30”D 6,5 mm 0.25”

SP6TA 20,0 mm 0.68”B 7,5 mm 0.30”D 6,5 mm 0.25”


5WLA 16,0 mm 0.63”B 8,5 mm 0.33”C 2,5 mm 0.10”D 4,0 mm 0.15” E 2,5 mm 0.10”

600MA 20 mm 0.79”B 11 mm 0.43”E 2,3 mm 0.09”

637LA 6,0 mm 0.23”B 4,0 mm 0.15”E 4,0 mm 0.15”

SP4TP1A 12,0 mm 0.47”B 8,5 mm 0.33”D 6,5 mm 0.25” The SPXT wafer tweezers (SP4T, SP5T and SP6T) have been espe-

cially developed for the handling of very fragile and scratch sensitivewafer (silicon as well glass). These tweezers have a large lower pad-dle and a short upper paddle made of Teflon. In this way, although avery confortable and precise handling is ensured, the upper surface isabsolutely preserved.

ideal - tek s.a.

21

A A5'' 130 mm

B B4 3/4'' 120 mm

G G5'' 130 mm

M M5'' 130 mm

R R5 3/4'' 145 mm

55A 1/2'' 115 mm TO-1858A 1/2'' 115 mm TO-5

572

56A 4 3/4'' 120 mm TO-1859A 4 3/4'' 120 mm TO-5

573

61A4 1/4'' 110 mm

571

571, 572, 573145 mm 5.70”6 mm 0.23”2,5-5,0 mm 0.10”-0.20”

577, 578, 579115 mm 4.50”4 mm 0.15”2,0 mm 0.08”

581, 582, 583115 mm 4.50”4 mm 0.15”1,0 mm 0.04”

55AX 1/2'' 115 mm TO-18

56AX4 1/4'' 110 mm


LenghtTipsComponents

Component Positioning Tweezers

Nickelplated Tweezers


ideal - tek s.a.

Quality comes first

ideal-tek s.a. - rs components

Documents