index [] · product sheet igland 3001 this winch is not sold on the european market 01.06.23...

priestc

I N D E X

Farmi JL 2 / 601 JL 60T JL 601 JL 501 Jl 351 and JL 351P JL 290 JL 351 PHD Normet EV 300 Hydraulic

Fransgard V-2800, V-4000, V-6500

Frnt Le

Igland Igland 3001 Igland 3201 Igland 4001 Igland 4101 Igland 4201 Igland 4501 Igland 5001 Igland 5002 Pento TL Igland 5201 Igland 6002 Pronto TL Igland 6101 Igland 6601 Igland 9001 Grosso Igland 9002 Maxo TL

Jewell

Lewis Winch 400 Series Pro

800 Series Double-Drum Conversion Kit Mole & Tree Planter Dynamometer

Norse Norse 290 Norse 325 Norse 390 Norse 415 Norse 425 Norse 450 Norse 490 Norse 525

WIN

CH

ES

Norse 615

I N D E X

Norwood

Tajfun

WIN

CH

ES

IGLAND 3001

- Single-drum winch for standard farm tractor- Ideal for hauling in firewood- Characterized by basic, solid welded design- Max pulling capacity: 2.9 tons (29 kN)- Recommended tractor size: 20 - 45 kW ( 25 - 60 hp)- Cord operation and ratchet brakes are standard fittings.Designed for optional radio remote control- Equipped with cable cutters and hooks for extra choke chains

This winch is not sold on the European market

00.05.29Manufacturer of Forestry EquipmentISO-9001 Certificated Company:

IGLAND AS, Roresanden 109,N-4885 Grimstad, NorwayPhone +47 37 04 13 66Fax +47 37 04 46 10E-mail: [email protected]

Product sheet

IG LAND 3001 This winch is not sold on the European m arket

01.06.23M anufacturer of Norse and Igland Forestry Equipm entISO-9001 Certificated Com pany:

IGLAND AS, Roresanden 109,N-4885 Grim stad, NorwayPhone +47 37 04 13 66Fax +47 37 04 46 10www.igland-as.com E-m ail: corporate@ igland-as.com

ApplicationsThe sm allest Igland winch. A basic winch for the "hobby forester" with a sm all parcel ofwoodland. Ideal for hauling in firewood. A single-drum linkage-m ount winch suitable fortractors over 25 hp.

TechnicalspecificationsM ax pulling capacity - drum em pty ............................. 29 kN (. 2 900 kg) - 6 520 lbs

- drum full, according to ISO 6687 ......................12.5 kN - 2 810 lbsNum ber of drum s .................................................................. 1W ire rope, calculated capacity ..............................48 m 9 m m , 63 m 8 m m (ISO 6687)Recom m ended cable length .......................................35 m 8 m m - 5/16" x 115'Haul-in speed @ 540 PTO rpm (M in - M ax) ............. 0.61 - 1.39 m /s (ISO 6687), 2.0 - 4.56 ft/secReduction ratio .............................................................. 1 : 5.18M inim um PTO power.................................................. 19 kW (ISO 6687)Controls ........................................................Standard: M anual (cord)Clutch ....................................................... Friction pads, replaceableBrake ....................................................................Pawl brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground .............................................. 35 cm - 14"Height (standard) / W idth / Depth ............................ 115 / 100 / 33 cm - 46 / 40 / 13 in.W eight (without wire rope)........................................Standard: 145 kg - 320 lbs

Pulling capacity� All IGLAND winches are designed for m ounting on farm

tractors with standard three-point hitches� This winch is fabricated of RAEX-M ultisteel� Recom m ended cable type: 6 x 26 W S + IW RC 180 kp

W e reserve the right to m ake changes

IGLAND 3201

- Winch model for standard farm tractors- New automatic all weather band brake fitted as standard- Pull force: 3.2 tons (32 kN)- Cable curbs prevent cable jumping off drum when winching in- Large wire rope capacity- The model is characterized by basic, solid welded design- Recommended tractor size: from 22 kW (from 30 hp)- Cord operation is standard. Designed for optional radio remotecontrol- Equipped with cable cutters and hooks for extra choke chains- Features adjustable pto drive height to accommodate a widerange of tractors



p g g _

Product sheet

IG LAND 3201

01.06.23M anufacturer of Forestry Equipm entISO-9001 Certificated Com pany:

IGLAND AS, Roresanden 109,N-4885 Grim stad, NorwayPhone +47 37 04 13 66Fax +47 37 04 46 10E-m ail: corporate@ igland-as.com

ApplicationsA basic winch for the "hobby forester" with a sm all parcel of woodland. Ideal for haulingin firewood. A single-drum linkage-m ount winch suitable for tractors over 30 hp.Autom atic all weather band brake fitted as standard

Technical specificationsM ax pulling capacity - drum em pty ...................................... 32 kN (. 3.2 tons)

- drum full, according to ISO 6687 .............................. 11.1 kNNum ber of drum s .................................................................. 1W ire rope, calculated capacity .............................78 m 9 m m , 62 m 10 m m (ISO 6687)Recom m ended cable length ..................................................35 m 9 m mHaul-in speed @ 540 PTO rpm (M in - M ax) ...........................0.61 - 1.74 m /s (ISO 6687)Reduction ratio .............................................................. 1 : 5.18M inim um PTO power.................................................. 21 kW (ISO 6687)Brake power ..................................................................40 kNControls ........................................................Standard: M anual (cord)Clutch ....................................................... Friction pads, replaceableBrake ...........................................Spring-loaded band, autom atic safety brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ...................................................35 cmHeight (standard) / W idth / Depth ................................... 115 cm / 100 cm / 35 cmW eight (without wire rope)............................................... Standard: 154 kg

Pulling capacity� All Igland winches are designed for m ounting on farmtractors with standard three-point hitches� This winch is fabricated of RAEX-M ultisteel� Recom m ended cable type: 6 x 26 W S + IW RC 180 kp

This winch m odel conform s to EU M achine Directive (CElabel)

W e reserve the right to m ake changes.

IGLAND 4001

- Single-drum winch for standard farm tractor- Strong and stable, this winch has a simple design and operationmaking it ideal for beginners to the woods- Characterized by basic, solid welded design- Max pulling capacity: 3.9 tons (39 kN)- Recommended tractor size: 25 - 52 kW ( 35 - 70 hp)- Cord operation and ratchet brakes are standard fittings.Designed for optional radio remote control- Features adjustable pto drive height to accomodate a widerange of tractors- Equipped with cable cutters and hooks for extra choke chains




p g g _

Product sheet



IGLAND AS, Roresanden 109,N-4885 Grim stad, NorwayPhone +47 37 04 13 66 Fax +47 37 04 46 10www.igland-as.comE-m ail: corporate@ igland-as.com

ApplicationsRobust and stable, this is a sm all but effective winch suitable for winching in tim berand skidding logs to the landing area. Suitable for tractors from 35 to 70 hp. Itsparticularly sim ple design and operation m ake this winch ideal for beginners.W elded construction facilitates m aintenance. The right selection of add-ons canm ake the IG LAND 4001 a perfect com pact winch for the professional.

Technical specificationsM ax pulling capacity - drum em pty ............................. 39 kN (. 3 900 kg) - 8 770 lbs

- drum full, according to ISO 6687 ......................15.3 kN - 3 440 lbsNum ber of drum s .................................................................. 1W ire rope, calculated capacity .............................57 m 10 m m , 95 m 8 m m (ISO 6687)Recom m ended cable length .......................................50 m 10 m m - 3/8" x 164'Haul-in speed @ 540 PTO rpm (M in - M ax) ..............0.61 - 1.36 m /s (ISO 6687), 2.0 - 4.46 ft/secReduction ratio .............................................................. 1 : 5.18M inim um PTO power.................................................. 26 kW (ISO 6687)Controls ........................................................Standard: M anual (cord)Clutch ........................................................ friction pads, replaceableBrake ....................................................................Pawl brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ....................................42 cm - 17 in., adjustableHeight (standard) / W idth / Depth ............................ 132 / 125 / 42 cm - 52 / 50 / 17 in.W eight (without wire rope)........................................Standard: 197 kg - 445 lbs

Pulling capacity

� All Igland winches are designed for m ounting on farmtractors with standard three-point hitches� This winch is fabricated of RAEX-M ultisteel� Recom m ended cable type: 6 x 26 W S + IW RC 180 kp


IGLAND 4101

- A typical all-round winch for farmers and woodland owners- Pull force: 4.1 tons (41 kN)- Hinged butt plate- Solid, simple and easy to operate, ideal for radio remote control- 3-point hitch mounted- Optional positioning of the haul-in block- Ideal for agricultural tractors, 40 - 75 hp- Automatic safety brake fitted as standard



p g g _

Product sheet

IG LAND 4101


IGLAND AS, Roresanden 109,N-4885 Grim stad, NorwayPhone +47 37 04 13 66 Fax +47 37 04 46 10www.igland-as.come-m ail: corporate@ igland-as.com

ApplicationsA typical all-round winch for farm ers and woodland owners. Solid, sim ple andeasy to operate, ideal for radio rem ote control. 3-point hitch m ounted. Hinged buttplate. Optional positioning of the haul-in block. Ideal for agricultural tractors, 40 -75 hp. Autom atic safety brake fitted as standard.

Technical specificationsM ax pulling capacity - drum em pty ................... 41 kN (. 4.1 tons)

- drum full, according to ISO 6687 .............................. 15.9 kNNum ber of drum s .................................................................. 1W ire rope, calculated capacity (ISO 6687)............................. 77 m 10 m m , 62 m 11 mRecom m ended cable length .................................................50 m 10 m mHaul-in speed @ 540 PTO rpm (M in - M ax) (ISO 6687) standard: ...................0.61 - 1.71 m /sHaul-in speed @ 540 PTO rpm (M in - M ax) (ISO 6687) with optional reduction ratio .....0.39 - 0.99 m /sReduction ratio standard ........................................................ 1 : 5.2Reduction ratio option ............................................................1 : 9M inim um PTO power (ISO 6687) standard .......................................... 28 kWM inim um PTO power (ISO 6687) with optional reduction ratio ............................ 19 kWBrake power ..................................................................52 kNControls ........................................................Standard: M anual (cord)Clutch ....................................................... Friction pads, replaceableBrake ...........................................Spring-loaded band, autom atic safety brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ...................................................46 cmHeight (standard) / W idth / Depth .........................................190 / 151 / 62 cmW eight (without wire rope)............................................... Standard: 280 kg

Pulling capacity

� All Igland winches are designed for m ounting on farmtractors with standard three-point hitches� This winch is fabricated of RAEX-M ultisteel� Recom m ended cable type: 6 x 26 W S + IW RC 180 kp� This winch m odel conform s to EU M achine Directive(CE label)


IGLAND 4201

- Winch model for standard farm tractors- New automatic all weather band brake fitted as standard- Pull force: 4.2 tons (42 kN)- Cable curbs prevent cable jumping off drum when winching in- Large wire rope capacity- The model is characterized by basic, solid welded design- Recommended tractor size: 29-52 kW ( 40-70 hp)- Cord operation is standard. Designed for optional radio remotecontrol- The winch is equipped with cable cutters and hooks for extrachoke chains- Features adjustable pto drive height to accommodate a widerange of tractors

See product sheet and list of optional equipment available for thismodel, or ask us for further information.



Product sheet

IG LAND 4201



ApplicationsRobust and stable, this is a sm all but effective winch suitable for winching in tim berand skidding logs to the landing area. Suitable for tractors from 40 to 70 hp. Itsparticularly sim ple design and operation m ake this winch ideal for beginners.W elded construction facilitates m aintenance. The right selection of add-ons canm ake the IG LAND 4201 a perfect com pact winch for the professional. Autom atic allweather band brake fitted as standard.


- drum full, according to ISO 6687 ................................15 kNNum ber of drum s .................................................................. 1W ire rope, calculated capacity ............................77 m 10 m m , 62 m 11 m m (ISO 6687)Recom m ended cable length .................................................50 m 10 m mHaul-in speed @ 540 PTO rpm (M in - M ax) ...........................0.67 - 1.71 m /s (ISO 6687)Reduction ratio .............................................................. 1 : 5.18M inim um PTO power.................................................. 28 kW (ISO 6687)Brake power ................................................................ 52.5 kNControls ........................................................Standard: M anual (cord)Clutch ........................................................ friction pads, replaceableBrake ...........................................Spring-loaded band, autom atic safety brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ..........................................42 cm , adjustableHeight (standard) / W idth / Depth ................................... 132 cm / 125 cm / 44 cmW eight (without wire rope)............................................... Standard: 206 kg

Pulling capacity




IGLAND 4501

- A typical all-round winch for farmers and woodland owners- Solid, simple and easy to operate, ideal for radio remote control- Pull force: 4.5 tons (45 kN)- 3-point hitch mounted- Hinged butt plate- Optional positioning of the haul-in block- Ideal for agricultural tractors, 40 - 75 hp



Product sheet




IGLAND AS, Roresanden 109, N-4885 Grim stad, NorwayPhone +47 37 04 13 66 Fax +47 37 04 46 10www.igland-as.com E-m ail: corporate@ igland-as.com

ApplicationsA typical all-round winch for farm ers and woodland owners. Solid, sim ple andeasy to operate, ideal for radio rem ote control. 3-point hitch m ounted. Hingedbutt plate. O ptional positioning of the haul-in block. Ideal for agricultural tractors,40 - 75 hp.

Technical specificationsM ax pulling capacity - drum em pty ISO 6687 .................... 45 kN (4 500 kg . 10 116 lbs)

- drum full ..................................................20 kNNum ber of drum s .................................................................. 1W ire rope, calculated capacity (ISO 6687).............................70 m 9 m m , 57 m 10 m mRecom m ended cable length .......................................50 m 10 m m - 3/8" x 164'Haul-in speed @ 540 pto rpm (M in - M ax)(ISO 6687).............................0.67 - 1.47 m /sReduction ratio ............................................................... 1 : 5.2M inim um PTO power (ISO 6687).................................................32.5 kWControls ........................................................Standard: M anual (cord)Clutch ....................................................... Friction pads, replaceableBrake ............................................................. Ratchet/pawl brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground .............................................50 cm - 20 in.Height (standard) / W idth / Depth ...................... 192 cm / 151 cm / 55 cm - 76 / 60 / 22 in.W eight (without wire rope, standard) ........................................ 260 kg - 573 lbs

Pulling capacity


IGLAND 5001

- Single-drum winch for standard farm tractor- Brute force and efficiency provide total control over the loadunder the most challenging conditions- Characterized by basic, solid welded design- Max pulling capacity: 4.9 tons (49 kN)- Recommended tractor size: 37 - 59 kW ( 50 - 80 hp)- Cord operation and ratchet brakes are standard fittings.Designed for optional radio remote control- The low profile construction of the winch keeps the rearoverhang to a minimum- Features adjustable pto drive height to accomodate a widerange of tractors- Equipped with cable cutters and hooks for extra choke chains




Product sheet



IGLAND AS, Roresanden 109,N-4885 Grim stad, NorwayPhone +47 37 04 13 66 Fax +47 37 04 46 10www.igland-as.comE-m ail: corporate@ igland-as.com

ApplicationsThis is a winch for those who require a higher standard of strength, safety andefficiency. 50 to 80 hp is the recom m ended tractor range for this m odel, which isdesigned for a pulling capacity of 4.9 tons. This winch offers an ease of operationthat ensures perfect control over the brute force of your tractor and winch under them ost challenging conditions. The low-profile construction of this winch keeps rearoverhang to a m inim um .

Technical specificationsM ax pulling capacity - drum em pty ........................... 49 kN (. 4 900 kg) - 11 020 lbs

- drum full, according to ISO 6687 ...............................20 kNNum ber of drum s .................................................................. 1W ire rope, calculated capacity .......................................66 m 11 m m (ISO 6687)Recom m ended cable length ...................................... 50 m 11 m m - 7/16" x 164'Haul-in speed @ 540 PTO rpm (M in - M ax) ..............0.58 - 1.45 m /s (ISO 6687), 1.9 - 4.75 ft/secReduction ratio .................................................................1 : 6M inim um PTO power.................................................. 31 kW (ISO 6687)Controls ........................................................Standard: M anual (cord)Clutch ....................................................... Friction pads, replaceableBrake ....................................................................Pawl brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ....................................52 cm - 21 in., adjustableHeight (standard) / W idth / Depth ............................ 154 / 150 / 43 cm - 61 / 60 / 17 in.W eight (without wire rope)........................................Standard: 285 kg - 630 lbs

Pulling capacity



IGLAND 5002 Pento TL

- The smallest model in IGLAND's range of double-drum forestrywinches- Suitable for thinning and light harvesting- High capacity in a lightweight winch- Line pull: 5 tons (50 kN) on each drum- Tractor size: 52-81 kW ( 70-110 hp)- Electrohydraulic low-pressure operation is standard (tractordependant). Radio remote control option- Cable curbs prevent cable jumping off drum when winching in- Winch drum over run brake has external adjustment



p g g

Product sheet

IG LAND 5002 Pento TL



ApplicationsIdeal for thinning and light harvesting. This winch is designed for use on astandard 70 - 110 hp farm tractor. 5 tons of pull on each drum . A 2-drum winch iseasier to use than a single-drum winch, as a lighter cable with fewer sliders m aybe used, and there are 2 cables to carry loads.

Technical specificationsM ax pulling capacity - drum em pty .......................................50 kN (. 5 tons)

- drum full, according to ISO 6687 .............................. 26.5 kNNum ber of drum s .................................................................. 2W ire rope, calculated capacity ........................... 118 m 11 m m , 97 m 12 m m (ISO 6687)Recom m ended cable length ............................................. 2 X 35 m 11 m mHaul-in speed @ 540 PTO rpm (M in - M ax) ...........................0.59 - 1.12 m /s (ISO 6687)Reduction ratio ............................................................... 1 : 9.7M inim um PTO power (each drum )........................................ 37 kW (ISO 6687)Brake power ................................................................ 62.5 kNControls ........................................................... Electrohydraulic LH

Electric outfit: 13-pole contactClutch .............................................................Single friction plateBrake ...........................................Spring-loaded band, autom atic safety brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ..........................................38 cm , adjustableHeight (standard) / W idth / Depth ................................... 161 cm / 205 cm / 93 cmW eight (without wire rope)............................................... Standard: 683 kg

Pulling capacity




IGLAND 5201

- Single-drum winch for standard farm tractor- New automatic all weather band brake fitted as standard- Pull force: 5.2 tons (52 kN)- Cable curbs prevent cable jumping off drum when winching in- Large wire rope capacity- The model is characterized by basic, solid welded design- Recommended tractor size: 40-59 kW ( 55-80 hp)- Cord operation is standard. Designed for optional radio remotecontrol- The winch is equipped with cable cutters and hooks for extrachoke chains- Features adjustable pto drive height to accommodate a widerange of tractors



p g g

Product sheet

IG LAND 5201



ApplicationsThis is a winch for those who require a higher standard of strength, safety andefficiency. 55 to 80 hp is the recom m ended tractor range for this m odel, which isdesigned for a pulling capacity of 5.2 tons. This winch offers an ease of operationthat ensures perfect control over the brute force of your tractor and winch underthe m ost challenging conditions. The low-profile construction of this winch keepsrear overhang to a m inim um .Autom atic all weather band brake fitted asstandard.


- drum full, according to ISO 6687 ................................20 kNNum ber of drum s .................................................................. 1W ire rope, calculated capacity ............................86 m 11 m m , 71 m 12 m m (ISO 6687)Recom m ended cable length .................................................50 m 11 m mHaul-in speed @ 540 PTO rpm (M in - M ax) ...........................0.63 - 1.66 m /s (ISO 6687)Reduction ratio .................................................................1 : 6M inim um PTO power................................................. 35.4 kW (ISO 6687)Brake power ..................................................................65 kNControls ........................................................Standard: M anual (cord)Clutch ....................................................... Friction pads, replaceableBrake ...........................................Spring-loaded band, autom atic safety brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ..........................................52 cm , adjustableHeight (standard) / W idth / Depth ................................... 154 cm / 150 cm / 45 cmW eight (without wire rope)............................................... Standard: 294 kg

Pulling capacity




IGLAND 6002 Pronto TL

- A professional winch designed and dimensioned to tackledemanding forestry operations- Large drum-barrel diameter keeps pull consistent throughoutlong hauls- Pull: 6 tons (60 kN) on each drum- Tractor size: 52-88 kW ( 70-120 hp)- Electrohydraulic high pressure operation with self-containedhydraulics is standard. Radio remote control option- Cable curbs prevent cable jumping off drum when winching in- Winch drum over run brake has external adjustment- Switch for controlled lowering of load



Product sheet

IG LAND 6002 Pronto TL



ApplicationsA professional winch designed and dim ensioned to tackle dem anding forestryoperations. Equipped with electrohydraulic HP rem ote control and integralhydraulics that operate independently of tractor hydraulics. W ith no hoses toconnect and disconnect, frequent im plem ent changes are greatly facilitated andoil drips and leaks are elim inated. M oreover, im purities in one system do notcontam inate the other system . Large drum -barrel diam eter keeps line pullconsistent throughout long hauls. Recom m ended tractor range: 70-120 hp.


- drum full, according to ISO 6687 .............................. 32.4 kNNum ber of drum s .................................................................. 2W ire rope, calculated capacity ............................97 m 12 m m , 80 m 13 m m (ISO 6687)Recom m ended cable length ............................................. 2 X 35 m 12 m mHaul-in speed @ 540 PTO rpm (M in - M ax) ...........................0.60 - 1.11 m /s (ISO 6687)Reduction ratio ............................................................... 1 : 9.7M inim um PTO power (each drum )....................................... 44.8 kW (ISO 6687)Brake power ..................................................................75 kNControls ........................Electrohydraulic HP rem ote control, with self-contained hydraulics

Electric outfit: 13-pole contactClutch .............................................................Single friction plateBrake ...........................................Spring-loaded band, autom atic safety brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ..........................................38 cm , adjustableHeight (standard) / W idth / Depth ..................................161 cm / 205 cm / 92.5 cmW eight (without wire rope)............................................... Standard: 683 kg

Pulling capacity� All Igland winches are designed for m ounting on farmtractors with standard three-point hitches� This winch is fabricated of RAEX-M ultisteel� Recom m ended cable type: 6 x 26 W S + IW RC 180 kp



IGLAND 6101

- Unusually large drum capacity holds a generous length of heavycable- 6.1 tons (61 kN) of line pull definitely put this winch in the heavyduty class- Suitable for tractors in 45-69 kW ( 60-95 hp) range- Cord operation is standard. Remote control option- High or low pulling point- Large butt plate provides excellent ground-pressure stabilizingaction during winching- Cable curbs prevent cable jumping off drum when winching in- Optimum reeling characteristics



Product sheet

IG LAND 6101


IGLAND AS, Roresanden 109,N-4885 Grim stad, NorwayPhone +47 37 04 13 66 Fax +47 37 04 46 10www.igland-as.come-m ail: corporate@ igland-as.com

ApplicationsA heavy-duty single-drum winch with 6.1 tons of pull for m oving large quantities oftim ber. Unusually large drum capacity accom m odates a generous length of heavycable. Sim ple design, solid construction, low centre of gravity and a clear viewfrom the driver's seat. The trapezoidal butt-plate provides m axim um groundsupport during winching and is ideal for stacking logs. This m odel is fitted withhigh / low pulling point. Suitable for tractors in the 60 - 95 hp range.


- drum full, according to ISO 6687 .............................. 21.2 kNNum ber of drum s .................................................................. 1W ire rope, calculated capacity (ISO 6687)...........................109 m 12 m m , 90 m 13 m mRecom m ended cable length .................................................50 m 12 m mHaul-in speed @ 540 PTO rpm (M in - M ax) (ISO 6687) standard: ...................0.65 - 1.82 m /sHaul-in speed @ 540 PTO rpm (M in - M ax) (ISO 6687) with optional reduction ratio .....0.37 - 1.06 m /sReduction ratio standard ..........................................................1 : 6Reduction ratio option ........................................................ 1 : 10.36M inim um PTO power (ISO 6687) standard .......................................... 42 kWM inim um PTO power (ISO 6687) with optional reduction ratio ...........................27.7 kWBrake power ..................................................................75 kNControls ........................................................Standard: M anual (cord)Clutch ....................................................... Friction pads, replaceableBrake ...........................................Spring-loaded band, autom atic safety brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ...................................................57 cmHeight (standard) / W idth / Depth .........................................172 / 180 / 55 cmW eight (without wire rope)............................................... Standard: 445 kg

Pulling capacity

� All Igland winches are designed for m ounting on farmtractors with standard three-point hitches� This winch is fabricated of RAEX-M ultisteel� Recom m ended cable type: 6 x 26 W S + IW RC 180 kp� This winch m odel conform s to EU M achine Directive(CE label)


IGLAND 6601

- Electrohydraulic high pressure operation with self-containedhydraulics is standard- 6.6 tons (66 kN) of line pull make this suitable for tractors in the45-74 kW ( 60-100 hp) range- High or low pulling point- High line pull throughout haul- Switch for controlled lowering of load- Heavy duty butt plate- Active ground-pressure stabilizing action during winching- High-capacity drum- Good spooling characteristics- Close placement to tractor permits heavier loads- Hinged tower makes inspection easier



p g g

Product sheet

IG LAND 6601

ApplicationsA large and powerful single-drum winch with high or low spooling point. Equippedwith electrohydraulic HP rem ote control and integral hydraulics that operateindependently of tractor hydraulics. W ith no hoses to connect and disconnect,frequent im plem ent changes are greatly facilitated and oil drips and leaks areelim inated. M oreover, im purities in one system do not contam inate the othersystem . High-capacity drum m aintains steady strength throughout the pull. Closeplacem ent to the tractor perm its heavy loads, and its active ground-pressurestabilizing action gives it a good foothold during winching. The tower is hinged foreasy inspection. Suitable for tractors in the 45 - 74 kW (. 60 - 100 hp) range.


- drum full, according to ISO 6687 .............................. 35.6 kNNum ber of drum s .................................................................. 1W ire rope, calculated capacity ............................97 m 12 m m , 80 m 13 m m (ISO 6687)Recom m ended cable length ................................................50 m 12 m mHaul-in speed @ 540 PTO rpm (M in - M ax) ............................0.64 - 1.2 m /s (ISO 6687)Reduction ratio .................................................................1 : 9M inim um PTO power................................................. 46.2 kW (ISO 6687)Brake power ................................................................ 82.5 kNControls ........................Electrohydraulic HP rem ote control, with self-contained hydraulicsClutch .............................................................Single friction plateBrake ...........................................Spring-loaded band, autom atic safety brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ...................................................52 cmHeight (standard) / W idth / Depth ................................... 205 cm / 183 cm / 67 cmW eight (without wire rope)............................................... Standard: 495 kg

Pulling capacity

� All Igland winches are designed for m ounting on farmtractors with standard three-point hitches

� This winch is fabricated of RAEX-M ultisteel� Recom m ended cable type: 6 x 26 W S + IW RC 180 kp

All Igland winch m odels conform to EU M achineDirective (CE label)


IGLAND AS, Roresanden 109, N-4885 Grim stad, NorwayPhone +47 37 04 13 66Fax +47 37 04 46 10E-m ail:

IGLAND 9001 Grosso

- Heavy 9 ton (90 kN) line pull makes this suitable for tractors inthe 66-103 kW ( 90-140 hp) range- Electrohydraulic high pressure operation with self-containedhydraulics is standard. Radio remote control option- Good spooling characteristics- High or low pulling point- Switch for controlled lowering of load- Butt plate provides good ground-pressure stabilizing actionduring winching and is ideal for piling logs- Close placement to tractor permits heavier loads- Heavy duty log guard- High-capacity drum- Easy maintenance



Product sheet

IG LAND 9001 Grosso



ApplicationsHigh output under dem anding conditions m ake this a winch for the professional.Close placem ent to tractor perm its heavier loads. A high-capacity drum andstable line pull (9 tons) m ake this ideal for difficult operations. High or low pullingpoint. G ood spooling characteristics. Designed for 90-140 hp tractors andequipped with electrohydraulic high pressure operation with self-containedhydraulics.


- drum full, according to ISO 6687 .............................. 43.4 kNNum ber of drum s .................................................................. 1W ire rope, calculated capacity .......................................97 m 14 m m (ISO 6687)Recom m ended cable length .................................................50 m 14 m mHaul-in speed @ 540 PTO rpm (M in - M ax) ...........................0.59 - 1.21 m /s (ISO 6687)Reduction ratio ................................................................ 1 : 10M inim um PTO power................................................. 57.3 kW (ISO 6687)Brake power ............................................................... 112.5 kNControls ....................................Electrohydraulic HP with self-contained hydraulics

Electric outfit: 13-pole contactClutch ............................................................ Double friction plateBrake ...........................................Spring-loaded band, autom atic safety brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ...................................................45 cmHeight (standard) / W idth / Depth ................................... 202 cm / 205 cm / 80 cmW eight (without wire rope)............................................... Standard: 550 kg

Pulling capacity




IGLAND 9002 Maxo TL

- Tractor size: 59 kW- Electrohydraulic high pressure operation with self-containedhydraulics is standard. Radio remote control option- Cable curbs prevent cable jumping off drum when winching in- Winch drum over run brake has external adjustment- Switch for controlled lowering of load



Product sheet

IG LAND 9002 M axo TL



ApplicationsA heavy duty winch with 9 tons of line pull on each drum . Equipped withelectrohydraulic HP rem ote control and integral hydraulics that operateindependently of tractor hydraulics. W ith no hoses to connect and disconnect,frequent im plem ent changes are greatly facilitated and oil drips and leaks areelim inated. M oreover, im purities in one system do not contam inate the othersystem . Each drum is driven by a double clutch for increased operating reliabilityand reduced wear. Suitable for tractor sizes upwards of 80 hp.


- drum full, according to ISO 6687 .............................. 44.4 kNNum ber of drum s .................................................................. 2W ire rope, calculated capacity .......................................92 m 14 m m (ISO 6687)Recom m ended cable length ..............................................2 x 50 m 14 m mHaul-in speed @ 540 PTO rpm (M in - M ax) ...........................0.30 - 0.61 m /s (ISO 6687)Reduction ratio .............................................................. 1 : 19.5M inim um PTO power (each drum )....................................... 33.8 kW (ISO 6687)Brake power ............................................................... 112.5 kNControls ........................Electrohydraulic HP rem ote control, with self-contained hydraulics

Electric outfit: 13-pole contactClutch ............................................................ Double friction plateBrake ...........................................Spring-loaded band, autom atic safety brakeAttachm ent .......................................................... Three-point hitchHeight of pto shaft above ground ..........................................38 cm , adjustableHeight (standard) / W idth / Depth ................................... 161 cm / 205 cm / 95 cmW eight (without wire rope)...............................................Standard: 722 kg

Pulling capacity




290

- The smallest Norse winch- A basic winch for the «hobby forester» with a small parcel ofwoodland- Ideal for hauling in firewood- A single-drum linkage-mount winch suitable for tractors over 25hp- Max pulling capacity 2.9 tons, 6 520 lbs- Designed for optional radio remote control




Product sheet

290 This winch is not sold on the European m arket


01.06.23M anufacturer of Norse and Igland Forestry Equipm ent. ISO-9001 Certificated Com pany:IGLAND AS, Roresanden 109, N-4885 Grim stad, Norway. www.igland-as.comPhone +47 37 04 13 66, Fax +47 37 04 46 10, E-m ail: corporate@ igland-as.com

The smallest Norse winch. A basic winch for the "hobby forester" with asmall parcel of woodland. Ideal for hauling in firewood. A single-drumlinkage-mount winch suitable for tractors over 25 hp.

Technical specifications

Max pulling capacity - drum empty . . . . . . . . . . . . . 29 kN, (. 2 900 kg), 6 520 lbs- drum full, according to ISO 6687 . . . . . 12.5 kN, 2 810 lbs

Number of drums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Wire rope, calculated capacity (ISO 6687) . . . . . . . . . . . . 48 m 9 mm, 63 m 8 mmRecommended cable length . . . . . . . . . . . . . . . . . . . . . . . 35 m 8 mm, 5/16" x 115'Haul-in speed @ 540 pto rpm (min-max)(ISO 6687) . . 0.61-1.39 m/s, 2.0-4.56 ft/secReduction ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 : 5.18Minimum PTO power (ISO 6687) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 kWControls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard: Manual (cord)Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Friction pads, replaceableBrake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pawl brakeAttachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Three-point hitchHeight of pto shaft above ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 cm, 14 in.Height (standard) / Width / Depth . . . . . . . . . . . 115 / 100 / 33 cm - 46 / 40 / 13 in.Weight (without wire rope, standard) . . . . . . . . . . . . . . . . . . . . . . . 145 kg, 320 lbs

� All Norse winches are designed for mounting on farm tractors with standardthree-point hitches

325

- Characterized by basic, solid welded design- A skidding winch for the «hobby forester» with a small parcel ofwoodland- Ideal for hauling in firewood- A single-drum linkage-mount winch suitable for tractors over 30hp- Automatic all weather band brake fitted as standard- Max pulling capacity 3.2 tons- Designed for optional radio remote control



1 of 1 9/19/02 7:54 AM

325 http://www.igland-as.com/engelsk/c_325.htm

Product sheet

325



A basic winch for the "hobby forester" with a small parcelof woodland. Ideal for hauling in firewood. A single-drumlinkage-mount winch suitable for tractors over 30 hp.

Automatic all weather band brake fitted as standard


M ax pulling capacity - drum em pty ......................... 32 kN, (. 3.2 t)- drum full, according to ISO 6687 ..............11.1 kN

Num ber of drum s .................................................1W ire rope, calculated capacity (ISO 6687)........... 78 m 9 m m , 62 m 10 m mRecom m ended cable length ................................. 35 m 9 m mHaul-in speed @ 540 pto rpm (m in-m ax) (ISO 6687)........... 0.61 - 1.74 m /sReduction ratio ..............................................1 : 5.18M inim um PTO power (ISO 6687) .................................21 kWBrake power ................................................. 40 kNControls ......................................Standard: M anual (cord)Clutch ...................................... Friction pads, replaceableBrake ........................ Spring-loaded band, autom atic safety brakeAttachm ent ......................................... Three-point hitchHeight of pto shaft above ground ................................. 35 cmHeight (standard) / W idth / Depth .................. 115 cm / 100 cm / 35 cmW eight (without wire rope, standard) ..............................154 kg

� This Norse winch model conforms to EU Machine Directive (CE label)� All Norse winches are designed for mounting on farm tractors with standard

three-point hitches

390

- Strong and stable, this winch has a simple design and operationmaking it ideal for beginners to the woods- The addition of a top pulley and remote control can make themodel a perfect compact winch for the professional- For tractors 35 to 70 hp- Max pulling capacity 3.9 tons, 8 770 lbs- Norse 390 has an adjustable height input shaft (four positions)so that the model can be used on a large range of tractor sizeswithout working the PTO at an extreme angle- Drive chain tensioner is adjustable and spring loaded




Product sheet




Robust and stable, this is a small but effective winch suitable forwinching in timber and skidding logs to the landing area. Suitable fortractors from 35 to 70 hp. Its particularly simple design and operationmake this winch ideal for beginners. Welded construction facilitatesmaintenance. The right selection of add-ons can make the Norse 390a perfect compact winch for the professional.


M ax pulling capacity - drum em pty ............. 39 kN, (. 3 900 kg), 8 770 lbs- drum full, according to ISO 6687 ..... 15.3 kN, 3 440 lbs

Num ber of drum s .................................................1W ire rope, calculated capacity (ISO 6687)........... 57 m 10 m m , 95 m 8 m mRecom m ended cable length .......................50 m 10 m m , 3/8" x 164'Haul-in speed @ 540 pto rpm (m in-m ax) (ISO 6687) 0.61-1.36 m /s, 2.0-4.46 ft/secReduction ratio ..............................................1 : 5.18M inim um PTO power (ISO 6687) .................................26 kWControls ......................................Standard: M anual (cord)Clutch ...................................... Friction pads, replaceableBrake .................................................. Pawl brakeAttachm ent ......................................... Three-point hitchHeight of pto shaft above ground .................. 42 cm , 17 in., adjustableHeight (standard) / W idth / Depth ........... 132 / 125 / 42 cm - 52 / 50 / 17 in.W eight (without wire rope, standard) .......................197 kg, 445 lbs


415

- A typical all-round winch for farmers and woodland owners- Pull force: 4.1 tons (41 kN)- Hinged butt plate- Solid, simple and easy to operate, ideal for radio remote control- 3-point hitch mounted- Optional positioning of the haul-in block- Ideal for agricultural tractors, 40 - 75 hp- Automatic safety brake fitted as standard



Product sheet

415



A typical all-round winch for farm ers and woodland owners. Solid,sim ple and easy to operate, ideal for radio rem ote control. 3-pointhitch m ounted. Hinged butt plate. O ptional positioning of the haul-inblock. Ideal for agricultural tractors, 40 - 75 hp. Autom atic safetybrake fitted as standard.

Technical specificationsM ax pulling capacity - drum em pty ............................. 41 kN, (. 4.1 t)

- drum full, according to ISO 6687 ................... 15.9 kNNum ber of drum s ....................................................... 1W ire rope, calculated capacity (ISO 6687)................ 77 m 10 m m , 62 m 11 m mRecom m ended cable length ..................................... 50 m 10 m mHaul-in speed @ 540 pto rpm (m in-m ax, ISO 6687) standard:.......... 0.61 - 1.71 m /sHaul-in speed @ 540 pto rpm (m in-m ax, ISO 6687) with reduction ratio 1:9 . 0.39 - 0.99 m /sReduction ratio standard ............................................. 1 : 5.2Reduction ratio option .................................................1 : 9M inim um PTO power (ISO 6687) with standard reduction ratio ............... 28 kWM inim um PTO power (ISO 6687) with optional reduction ratio ................ 19 kWBrake power ...................................................... 52 kNControls ............................................ Standard: M anual (cord)Clutch ............................................ Friction pads, replaceableBrake ............................... Spring-loaded band, autom atic safety brakeAttachm ent ...............................................Three-point hitchHeight of pto shaft above ground ....................................... 46 cmHeight (standard) / W idth ...............................190 cm / 151 cm / 62 cmW eight (without wire rope) standard ....................................280 kg

� This Norse winch m odel conform s to EU M achine Directive (CE label)� All Norse winches are designed for m ounting on farm tractors with standard three-

point hitches

425

- Robust and stable, this is a small but effective winch suitable forwinching in timber and skidding logs to the landing area- Max pulling capacity 4.2 tons- Its particularly simple design and operation make this winchideal for beginners- Suitable for tractors from 40 to 70 hp- Automatic all weather band brake fitted as standard- Features adjustable pto drive height to accommodate a widerange of tractors- Cord operation is standard. Designed for optional radio remotecontrol



Product sheet

425



The right selection of add-ons can m ake the Norse 425 a perfectcom pact winch for the professional. Suitable for tractors from 40 to 70hp. W elded construction facilitates m aintenance. The winch is equippedwith cable cutters and hooks for extra choke chains.

Autom atic all weather band brake fitted as standard


M ax pulling capacity - drum em pty ......................... 42 kN, (. 4.2 t)- drum full, according to ISO 6687 ............... 15 kN

Num ber of drum s .................................................1W ire rope, calculated capacity (ISO 6687).......... 77 m 10 m m , 62 m 11 m mRecom m ended cable length ................................ 50 m 10 m mHaul-in speed @ 540 pto rpm (m in-m ax) (ISO 6687)........... 0.67 - 1.71 m /sReduction ratio ..............................................1 : 5.18M inim um PTO power (ISO 6687) .................................28 kWBrake power ................................................52.5 kNControls ......................................Standard: M anual (cord)Clutch ...................................... Friction pads, replaceableBrake ........................ Spring-loaded band, autom atic safety brakeAttachm ent ......................................... Three-point hitchHeight of pto shaft above ground ........................ 42 cm , adjustableHeight (standard) / W idth / Depth .................. 132 cm / 125 cm / 44 cmW eight (without wire rope, standard) ..............................206 kg


three-point hitches

450

- A typical all-round winch for farmers and woodland owners- Solid, simple and easy to operate, ideal for radio remote control- 3-point hitch mounted- Hinged butt plate- Optional positioning of the haul-in block- Ideal for agricultural tractors, 40 - 75 hp




Product sheet




A typical all-round winch for farm ers and woodland owners.Solid, sim ple and easy to operate, ideal for radio rem otecontrol. 3-point hitch m ounted. Hinged butt plate. O ptionalpositioning of the haul-in block. Ideal for agricultural tractors,40 - 75 hp.


M ax pulling capacity - drum em pty ............... 45 kN, (. 4.5 t) - 10 116 lbs- drum full, according to ISO 6687 ............... 20 kN

Num ber of drum s .................................................1W ire rope, calculated capacity (ISO 6687)........... 70 m 9 m m , 57 m 10 m mRecom m ended cable length ...................... 50 m 10 m m - 3/8" x 164'Haul-in speed @ 540 pto rpm (m in-m ax) (ISO 6687)............ 0.67-1.47 m /sReduction ratio ...............................................1 : 5.2M inim um PTO power (ISO 6687) ............................... 32.5 kWControls ......................................Standard: M anual (cord)Clutch ...................................... Friction pads, replaceableBrake ............................................Ratchet/pawl brakeAttachm ent ......................................... Three-point hitchHeight of pto shaft above ground ........................... 50 cm - 20 in.Height (standard) / W idth / Depth ........... 192 / 151 / 55 cm - 76 / 60 / 22 in.W eight (without wire rope, standard) ...................... 260 kg - 573 lbs

� All Norse winches are designed for m ounting on farm tractors with standardthree-point hitches

490

- Brute force and efficiency provide total control over the loadunder the most challenging conditions- The Norse 490 is a heavy duty design intended for theprofessional and the daily stress of skidding big timber- The low profile construction of the winch keeps the rearoverhang to a minimum- Designed for optional radio remote control- For tractors 50 to 90 hp- Maximum pull capacity 4.9 tons, 11 020 lbs- The model has an adjustable height input shaft (four positions)so that the winch can be used on a large range of tractor sizeswithout working the PTO at an extreme angle- Drive chain tensioner is adjustable and spring loaded




Product sheet




This is a winch for those who require a higher standard of strength,safety and efficiency. 50 to 80 hp is the recommended tractor rangefor this model, which is designed for a pulling capacity of 4.9 tons.This winch offers an ease of operation that ensures perfect controlover the brute force of your tractor and winch under the mostchallenging conditions. The low-profile construction of this winchkeeps rear overhang to a minimum.


M ax pulling capacity - drum em pty ............ 49 kN, (. 4 900 kg), 11 020 lbs- drum full, according to ISO 6687 .......20 kN, 4 500 lbs

Num ber of drum s .................................................1W ire rope, calculated capacity (ISO 6687)......................66 m 11m mRecom m ended cable length ......................50 m 11 m m , 7/16" x 164'Haul-in speed @ 540 pto rpm (m in-m ax) (ISO 6687) 0.58-1.45 m /s, 1.9-4.75 ft/secReduction ratio ................................................ 1 : 6M inim um PTO power (ISO 6687) .................................31 kWControls ......................................Standard: M anual (cord)Clutch ...................................... Friction pads, replaceableBrake .................................................. Pawl brakeAttachm ent ......................................... Three-point hitchHeight of pto shaft above ground .................. 52 cm - 21 in. adjustableHeight (standard) / W idth / Depth ........... 154 / 150 / 43 cm - 61 / 60 / 17 in.W eight (without wire rope, standard) .......................285 kg, 630 lbs


525

- This is a winch for those who require a higher standard ofstrength, safety and efficiency- 55 to 80 hp is the recommended tractor range for this model,which is designed for a pulling capacity of 5.2 tons.- This winch offers an ease of operation that ensures perfectcontrol over the brute force of your tractor and winch under themost challenging conditions- Automatic all weather band brake fitted as standard- The low-profile construction of this winch keeps rear overhangto a minimum- Cord operation is standard. Designed for optional radio remotecontrol



Product sheet

525



This is a winch for those who require a higher standard of strength,safety and efficiency. 55 to 80 hp is the recommended tractor rangefor this model, which is designed for a pulling capacity of 5.2 tons.This winch offers an ease of operation that ensures perfect controlover the brute force of your tractor and winch under the mostchallenging conditions. The low-profile construction of this winchkeeps rear overhang to a minimum.

Automatic all weather band brake fitted as standard


M ax pulling capacity - drum em pty ......................... 52 kN, (. 5.2 t)- drum full, according to ISO 6687 ............... 20 kN

Num ber of drum s .................................................1W ire rope, calculated capacity (ISO 6687)...........86 m 11m m , 71 m 12 m mRecom m ended cable length ................................ 50 m 11 m mHaul-in speed @ 540 pto rpm (m in-m ax) (ISO 6687)........... 0.63 - 1.66 m /sReduction ratio ................................................ 1 : 6M inim um PTO power (ISO 6687) ............................... 35.4 kWBrake power ................................................. 65 kNControls ......................................Standard: M anual (cord)Clutch ...................................... Friction pads, replaceableBrake ........................ Spring-loaded band, autom atic safety brakeAttachm ent ......................................... Three-point hitchHeight of pto shaft above ground ........................ 52 cm , adjustableHeight (standard) / W idth / Depth .................. 154 cm / 150 cm / 45 cmW eight (without wire rope, standard) ..............................294 kg


three-point hitches

615

- Unusually large drum capacity holds a generous length of heavycable- 6.1 tons (61 kN) of line pull definitely put this winch in the heavyduty class- Suitable for tractors in 45-69 kW ( 60-95 hp) range- Cord operation is standard. Remote control option- High or low pulling point- Large butt plate provides excellent ground-pressure stabilizingaction during winching- Cable curbs prevent cable jumping off drum when winching in- Optimum reeling characteristics



Product sheet

615



A heavy-duty single-drum winch with 6.1 tons of pull for m oving largequantities of tim ber. Unusually large drum capacity accom m odates agenerous length of heavy cable. Sim ple design, solid construction, lowcentre of gravity and a clear view from the driver's seat. The trapezoidalbutt-plate provides m axim um ground support during winching and isideal for stacking logs. This m odel is fitted with high / low pullingpoint. Suitable for tractors in the 60 - 95 hp range.Autom atic allweather band brake fitted as standard.


M ax pulling capacity - drum em pty .......................... 61 kN, (. 6.1 tons)- drum full, according to ISO 6687 ................... 21.2 kN

Num ber of drum s ....................................................... 1W ire rope, calculated capacity (ISO 6687)..................109m 12m m , 90m 13m mRecom m ended cable length ..................................... 50 m 12 m mHaul-in speed @ 540 PTO rpm (m in-m ax, ISO 6687) - standard ........ 0.65 - 1.82 m /sHaul-in speed @ 540 PTO rpm (m in-m ax, ISO 6687) - with optional reduction ratio ................................... 0.37 - 1.06 m /sReduction ratio standard ...............................................1 : 6Reduction ratio option ............................................. 1 : 10.36M inim um PTO power (ISO 6687) standard ............................... 42 kWM inim um PTO power (ISO 6687) with optional reduction ratio ................27.7 kWBrake capacity ..................................................... 75 kNControls ............................................ Standard: M anual (cord)Clutch ............................................ Friction pads, replaceableBrake ............................... Spring-loaded band, autom atic safety brakeAttachm ent ...............................................Three-point hitchHeight of pto shaft above ground ....................................... 57 cmHeight (standard) / W idth / Depth ............................. 172 / 180 / 55 cmW eight (without wire rope, standard) ....................................445 kg

� This Norse winch m odel conform s to EU M achine Directive (CE label), and toGerm an GS standard guidelines

� All Norse winches are designed for m ounting on farm tractors with standard three-point hitches

Return to Index

Go to

Delimbers

Feller Bunchers

Forwarders

Grapples

Harvesters

Harvesting Heads

Log Loaders

Masticators

Processing

Skidders

SM

AL

LW

OO

D I

I

Yarders

index [] · product sheet igland 3001 this winch is not sold on the european market 01.06.23...

Documents