industrial grade - amercable-com.vps...
TRANSCRIPT
37-442
TYPE G-GC 3/CHEAVY DUTY EASY-STRIP JACKET2000 VOLTS
Manufactured by Nexans AmerCable • (870) 862-4919 • (800) 643-1516 • Fax (870) 862-9613
FEATURES� Highly durable, abrasion-resistant CPE jacket specially
designed and cured for easy stripping � Outstanding Nexans AmerCable engineering support
APPLICATIONManufactured for use with static or slow-moving industrial equipment, including light-duty mining applications. Nexans AmerCable INDUSTRIAL GRADE (IG) Type G-GC features a reinforced jacketthat is specially designed for easy stripping and cable preparation.
This cable is designed for applications where grounding conductorsand a ground check conductor are required. Recommended maximum continuous conductor temperature is 90°C. Suitable for shallow water submersion when correctly terminated and sealed.
Cable carries MSHA marking indicating listing by the Mine Safetyand Health Administration and the Pennsylvania Department ofEnvironmental Protection.
Nexans AmerCable INDUSTRIAL Cable meets or exceeds CSA C 22.2 #96, ASTM B-172 and B-3.
RATINGS & APPROVALS� Canadian Standards Association File 82346, FT1,
FT5, -40°C Type W, G, G-GC, G-BGC up to 2kV
� Mine Safety & Health Administration (MSHA)
� Nexans AmerCable IG Cable meets or exceeds CSA Standards C 22.2 #96
INSULATION90°C ethylene-propylene rubber (EPR)
JACKET1
Black thermosetting Chlorinated Polyethylene(CPE) Jacket cured foreasy stripping and cable preparation.
Cable identification via permanent marking:AMERCABLE 2000V [SIZE] 3/C TYPE G-GC CSA LR82346 CPE FT1 FT5 -40C SUN RES [MSHA]
CONDUCTORSBare copper
GROUND WIRES (2)Bare copper
GROUND CHECK CONDUCTOR2
Bare copper with polyester tape separator and covered with yellow Ethylene Propylene Rubber (EPR).
1 Jacket – Black standard. Colored HD CPE jackets available upon request. Sizes 250, 350 and 500 have Extra Heavy-Duty (EHD) jacket.2Ground Check Conductor – EP insulation for EASY STRIPPING.*Ampacity – Based on continuous duty at 90°C conductor temperature.
SIZEAWG
86421
1/02/03/04/0250350500
SIZE AWG
101087654321
1/03/0
NO. OFWIRES PERCONDUCTOR
1331332592592592663234185326278881221
INSULATIONTHICKNESSMILS
606060608080808080959595
NOMINALOUTSIDE
DIMENSIONS IN.
0.9551.0311.1461.2981.4661.6001.6991.8331.9782.3202.6032.945
SIZE AWG
101010888888888
APPROX.WEIGHTLBS. PER1,000 FT.
562705978134717252048241928903489444758527929
AMPACITY*30°C
AMBIENTTEMP6587114152177205237274316352433536
37-442-
008CSA006CSA004CSA002CSA001CSA010CSA020CSA030CSA040CSA250CSA350CSA500CSA
GROUNDINGCONDUCTORS GROUND CHECKPOWER CONDUCTORS
Specially Designed &
Cured CPE Jacketfor Easier, Faster
Stripping!
________
®
350 Bailey Road • El Dorado, Arkansas USA • www.nexansamercable.com • e-mail: [email protected]
37-432
TYPE G 4/CHIGHLY DURABLE EASY-STRIP JACKET2000 VOLTS
FEATURES� Highly durable, abrasion-resistant CPE jacket specially designed
and cured for easy stripping � Outstanding Nexans AmerCable engineering support
APPLICATIONManufactured for use with static or slow-moving industrial equipment, including light-duty mining applications, or three-phase AC systems which require a ground. Nexans AmerCableINDUSTRIAL GRADE Type G features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation.
Recommended maximum continuous conductor temperatureis 90°C. Suitable for shallow water submersion when correctlyterminated and sealed.
Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection.
Nexans AmerCable IG Cable meets or exceeds CSA C 22.2 #96, ASTM B-172 and B-3.
RATINGS & APPROVALS� Canadian Standards Association File 82346, FT1,
FT5, -40°C Type W, G, G-GC, G-BGC up to 2kV
� Mine Safety & Health Administration (MSHA)
� Nexans AmerCable INDUSTRIAL Cable meets or exceedsCSA Standards C 22.2 #96
INSULATION90°C ethylene-propylenerubber (EPR)
JACKET1
Black thermosetting Chlorinated Polyethylene(CPE) Jacket cured foreasy stripping and cable preparation.
Cable identification via permanent marking:AMERCABLE 2000V [SIZE] 3/C TYPE G CSA LR82346 CPE FT1 FT5 -40C SUN RES [MSHA]
CONDUCTORSBare copper
GROUND WIRES (4)Bare copper insulatedwith green EPR
________
®
1 Jacket – Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request.*Ampacity – Based on continuous duty at 90°C conductor temperature, with not more than three current carrying conductors.
SIZEAWG
86421
1/02/03/04/0
SIZEAWG
1212121088765
NO. OFWIRES PERCONDUCTOR
133133259259259266323418532
INSULATIONTHICKNESSMILS
606060608080808080
NOMINALOUTSIDE
DIMENSIONS IN.
1.0451.1001.2231.4521.6051.7201.8731.9882.179
APPROX.WEIGHTLBS. PER1,000 FT.
6868401127169421262544301735444358
37-443-
008CSA006CSA004CSA002CSA001CSA010CSA020CSA030CSA040CSA
GROUNDSPOWER CONDUCTORS
Specially Designed &
Cured CPE Jacketfor Easier, Faster
Stripping!
AMPACITY*30°C
AMBIENTTEMP6587114152177205237274316
Manufactured by Nexans AmerCable • (870) 862-4919 • (800) 643-1516 • Fax (870) 862-9613
37-430/31
TYPE W 2-3/CPORTABLE POWER•EASY-STRIP JACKET2000 VOLTS
FEATURES
� Highly durable, abrasion-resistant CPE jacket speciallydesignedand cured for easy stripping
� Outstanding Nexans AmerCable engineering support
APPLICATION
Manufactured for heavy-duty or temporary power supplyservice, AC or DC, to motor or generator, portable and stationary heavy-duty equipment, cranes, conveyors andother mobile equipment applications.
Nexans AmerCable INDUSTRIAL Type W features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation.
Recommended maximum continuous conductor temperature is 90°C. Suitable for installation in air, ducts, shallow water or direct burial.
Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection.
Nexans AmerCable INDUSTRIAL Cable meets or exceed CSA C 22.2 #96, ASTM B-172 and B-3.
RATINGS & APPROVALS
� Canadian Standards Association File 82346, FT1, FT5, -40°C Type W, G, G-GC, G-BGC up to 2kV
� Mine Safety & Health Administration (MSHA)
� Nexans AmerCable INDUSTRIAL Cables meet or exceed CSA Standards C 22.2 #96
INSULATION90°C ethylene-propylenerubber (EPR)
JACKET1
Black thermosetting Chlorinated Polyethylene(CPE) Jacket cured foreasy stripping and cable preparation.
Cable identification via permanent marking:AMERCABLE 2000V [SIZE] 3/C TYPE W CSA LR82346 CPE FT1 FT5 -40C SUN RES [MSHA]
CONDUCTORSBare copper
SEPARATORFor easy strippingof insulation
®
Specially Designed &
Cured CPE Jacketfor Easier, Faster
Stripping!
________
350 Bailey Road • El Dorado, Arkansas USA • www.nexansamercable.com • e-mail: [email protected]
TYPE W 3/C
TYPE W 2/C
SIZEAWG
86421
1/02/03/04/0
NO. OFWIRES PERCONDUCTOR
133133259259259266323418532
INSULATIONTHICKNESSMILS
606060608080808080
NOMINALOUTSIDE
DIMENSIONS IN.
.831
.9451.0631.2601.4181.4961.6141.7481.901
APPROX.WEIGHTLBS. PER1,000 FT.
36249766098712441424169620572471
37-430-
008CSA006CSA004CSA002CSA001CSA010CSA020CSA030CSA040CSA
POWER CONDUCTORS AMPACITY*30°C
AMBIENTTEMP7499130174202234271313361
SIZEAWG
86421
1/02/03/04/0250350500
NO. OFWIRES PERCONDUCTOR
1331332592592592663234185326278881221
INSULATIONTHICKNESSMILS
606060608080808080959595
NOMINALOUTSIDE
DIMENSIONS IN.
.9841.0631.1811.3391.5121.6501.7521.8902.0392.3902.6813.031
APPROX.WEIGHTLBS. PER1,000 FT.
556688912128616071947225827303230421955757475
37-431-
008CSA006CSA004CSA002CSA001CSA010CSA020CSA030CSA040CSA250CSA350CSA500CSA
POWER CONDUCTORS AMPACITY*30°C
AMBIENTTEMP6587114152177205237274316352433536
1 Jacket – Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request.3/C 250, 350 and 500 sizes have Extra Heavy-Duty (EHD) jacket.
*Ampacity – Based on continuous duty at 90°C conductor temperature, with not more than three current carrying conductors.
Manufactured by Nexans AmerCable • (870) 862-4919 • (800) 643-1516 • Fax (870) 862-9613
37-432/33
TYPE W 4-5/CPORTABLE POWER•EASY-STRIP JACKET2000 VOLTS
FEATURES
� Highly durable, abrasion-resistant CPE jacket speciallydesignedand cured for easy stripping
� Outstanding Nexans AmerCable engineering support
APPLICATION
Manufactured for heavy-duty or temporary power supplyservice, AC or DC, to motor or generator, portable and stationary heavy-duty equipment, cranes, conveyors andother mobile equipment applications.
Nexans AmerCable INDUSTRIAL Type W features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation.
Recommended maximum continuous conductor temperature is 90°C. Suitable for installation in air, ducts, shallow water or direct burial.
Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection.
Nexans AmerCable INDUSTRIAL Cable meets or exceed CSA C 22.2 #96, ASTM B-172 and B-3.
RATINGS & APPROVALS
� Canadian Standards Association File 82346, FT1, FT5, -40°C Type W, G, G-GC, G-BGC up to 2kV
� Mine Safety & Health Administration (MSHA)
� Nexans AmerCable INDUSTRIAL Cables meet or exceed CSA Standards C 22.2 #96
INSULATION90°C ethylene-propylenerubber (EPR)
JACKET1
Black thermosetting Chlorinated Polyethylene(CPE) Jacket cured foreasy stripping and cable preparation.
Cable identification via permanent marking:AMERCABLE 2000V [SIZE] 3/C TYPE W CSA LR82346 CPE FT1 FT5 -40C SUN RES [MSHA]
CONDUCTORSBare copper
SEPARATORFor easy strippingof insulation
®
Specially Designed &
Cured CPE Jacketfor Easier, Faster
Stripping!
________
350 Bailey Road • El Dorado, Arkansas USA • www.nexansamercable.com • e-mail: [email protected]
TYPE W 4/C
SIZEAWG
86421
1/02/03/04/0
NO. OFWIRES PERCONDUCTOR
133133259259259266323418532
INSULATIONTHICKNESSMILS
606060608080808080
NOMINALOUTSIDE
DIMENSIONS IN.
0.9841.1041.2601.4961.6541.7721.9292.0472.244
APPROX.WEIGHTLBS. PER1,000 FT.
5867891083166620222375285533674079
37-432-
008CSA006CSA004CSA002CSA001CSA010CSA020CSA030CSA040CSA
POWER CONDUCTORS AMPACITY*30°C
AMBIENTTEMP6587114152177205237274316
TYPE W 5/C
SIZEAWG
86421
1/02/03/04/0
NO. OFWIRES PERCONDUCTOR
133133259259259266323418532
INSULATIONTHICKNESSMILS
606060608080808080
NOMINALOUTSIDE
DIMENSIONS IN.
1.0681.2201.4171.6141.8951.9292.0472.2452.441
APPROX.WEIGHTLBS. PER1,000 FT.
69010181400197526792843338441295075
37-433-
008CSA006CSA004CSA002CSA001CSA010CSA020CSA030CSA040CSA
POWER CONDUCTORS AMPACITY*30°C
AMBIENTTEMP6587114152177205237274316
1 Jacket – Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request.*Ampacity – Based on continuous duty at 90°C conductor temperature, with not more than three current carrying conductors.
INDUSTRIAL GRADE HIGHLY DURABLE, EASY STRIPPINGCSA APPROVED POWER CABLES
Nexans AmerCable350 Bailey Road • El Dorado, AR USA800-643-1516 • 870-862-4919 Fax: 870-862-8659email: [email protected]© 2017, AmerCable Incorporated 10_17
Nexans AmerCable is an ISO 9001 certified cable manufacturer that combines leading-edge manufacturing technology, innovative thinking, and high quality service to deliver the finest industrial cable products available.
Our professional engineers and sales force work with you to create innovative, cost effective project solutions.
CLICK HERE TOFOLLOW US!