industrial hose 2016 product catalog...temperature range-25˚f to 180˚f (-32˚c to 82˚c) packaging...

Industrial Hose 2016 Product Catalog

(Food & Beverage Hose)

www.contitech.us

Application Warning

The products in this catalog have been tested under controlled laboratory conditions to meet specific test criteria. These tests are not intended to reflect the performance of the product or any other material in any specific application, but are intended to provide the user with application guidelines. The products are intended for use by knowledgeable persons having the technical skills necessary to evaluate their suitability for specific applications.

Since Continental ContiTech, Inc. has no control over the number and variety of applications for which its products may be purchased or the conditions under which its products may be used by others, Continental ContiTech assumes no responsibility for performance results and applications. This catalog, however, contains available information to allow the user to determine the product’s acceptability and fitness for specific applications. No statement contained herein shall be construed as a license to operate, or as a recommendation or inducement to infringe existing patents or as an endorsement of products of specific manufacturers or systems.

Failure to follow procedures for selection, installation, care, maintenance and storage of hoses may result in the hose’s failure to perform properly and may result in damage to property and/or serious injury. Please refer to the General Information section of the catalog for hose care, maintenance and storage information.

All product design, dimensional and general information in this catalog is subject to change without prior notice. Working pressures and other technical information have been prepared from actual test results and other data considered to be reliable. However, Continental ContiTech assumes no responsibility for the accuracy of this information under varied conditions found in field use.

Chemical Hose

Do not use chemical hose at temperatures or pressures above those recommended by the manufacturer. All operators must be thoroughly trained in the care and use of this hose and must, at all times, wear protective clothing. A hose or system failure could cause the release of poisonous, corrosive or flammable material.

Detailed information concerning storage, care and maintenance may be found in the Hose Handbook published by the Rubber Manufacturer’s Association, 1400 K Street, N.W., Washington, D.C. 20005 and in SAE Recommended Practices J1273.

1 2016 Industrial Hose Catalog Application Warning

Table of Contents

Introduction

Continental ContiTech Industrial Hose

3-2627-35

Food & BeverageTransfer Washdown

2016 Industrial Hose Catalog Table of Contents

Food Transfer

PageDry or Liquid Temp. Range

Beer/ Wine Dairy Clear

Thermo- plastic Rubber

3-A, FDA, USDA NSF 61

Static Wire

Helical Wire

Exstatic 72 Dry-25˚F to 180˚F (-32˚C to 82˚C) Yes Yes Yes Yes Yes

EZ Glide Wine 84 Liquid-20˚F to 180˚F (-29˚C to 82˚C) Yes Yes Yes Yes

Gray Flextra LT 71 Liquid-25˚F to 212˚F (-32˚C to 100˚C) Yes Yes Yes Yes Yes

Harvest 73 Dry-25˚F to 180˚F (-32˚C to 82˚C) Yes Yes Yes

Nutriflex S&D 75 Both-15˚F to 158˚F (-26˚C to 70˚C) Yes Yes Yes Yes Yes Yes

Nutrilex Static Wire 76 Dry

-15˚F to 158˚F (-26˚C to 70˚C) Yes Yes Yes Yes Yes Yes

Nutriflo S&D 74 Both-15˚F to 158˚F (-26˚C to 70˚C) Yes Yes Yes Yes Yes Yes

Plicord Blue Flour 77 Dry

-40˚F to 180˚F(-40˚C to 82˚C) Yes FDA Yes

Plicord Brewline 78 Liquid-40˚F to 220˚F(-40˚C to 104˚C) Yes Yes Yes

Plicord ExtremeFlex Beverage Gray 85 Liquid

-30˚F to 220˚F (-34˚C to 104˚C) Yes Yes Yes Yes Yes

Plicord ExtremeFlex Beverage Red with EZ Clean Cover 86 Liquid

-30˚F to 220˚F (-34˚C to 104˚C) Yes Yes Yes Yes Yes

Plicord ExtremeFlex Food Grade 79 Dry

-25˚F to 212˚F (-32˚C to 100˚C) Yes Yes Yes Yes

Plicord Gray Food 70 Liquid-25˚F to 230˚F (-32˚C to 110˚C) Yes Yes Yes Yes

Plicord Wineline 80 Liquid-40˚F to 220˚F(-40˚C to 104˚C) Yes Yes Yes

Pliovic FG (FDA-3A) 81 Both

-10˚F to 158˚F (-23˚C to 70˚C) Yes Yes Yes Yes Yes Yes

Potable Water 82 Liquid-40˚F to 180˚F(-40˚C to 82˚C) Yes Yes

Spirathane PT 129 Dry0˚F to 158˚F (-18˚C to 70˚C) Yes Yes FDA Yes

Tan Flextra 88 Dry-40˚F to 180˚F(-40˚C to 82˚C) Yes

Tan Flexwing 87 Liquid-40˚F to 180˚F(-40˚C to 82˚C) Yes Yes Yes

Tan Softwall 89

Velocity Beverage Transfer 90

Vintner 83 Liquid-30˚F to 220˚F (-34˚C to 104˚C) Yes Yes Yes

White Flexwing 69 Both-25˚F to 230˚F (-32˚C to 110˚C) Yes Yes Yes Yes

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

3 Food Transfer

White Flexwing®

Product Specifications

ApplicationA highly flexible hose for gravity flow, pressure, or suction

service transferring oily and non-oily edibles from tank truck

and in-plant service.

Construction TubeWhite Chemivic™ synthetic rubber (FDA/USDA compliant

and conforms to 3-A Sanitary Standard 18-03)

CoverWhite Chemivic™ synthetic rubber (wrapped impression)

ReinforcementSpiral-plied synthetic fabric with galvanized wire helix

Temperature Range-25˚F to 230˚F (-32˚C to 110˚C)

Packaging100’ length, coiled, polywrapped

Branding (Spiral)Example: Continental ContiTech White Flexwing® 150 psi

WP; FDA, 3-A, and USDA

CouplingsContact fitting manufacturer for proper fitting

recommendations and coupling procedure.

Order Codes549-151

White Flexwing®

SAP # ID Nom. OD Max. WP Bend Radius Vacuum HG Weight

White in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m

20019284 3/4 19.1 1.20 30.5 150 1.03 2 51 29 737 0.47 0.70

20019286 1 25.4 1.44 36.6 150 1.03 3 76 29 737 0.57 0.85

20019287 1e 31.8 1.70 43.2 150 1.03 4 102 29 737 0.69 1.03

20019289 1f 38.1 1.97 50.0 150 1.03 4 102 29 737 0.86 1.28

20019292 2 50.8 2.53 64.3 150 1.03 5 114 29 737 1.23 1.83

20019296 2f 63.5 3.10 78.7 150 1.03 6 146 29 737 1.81 2.69

20019297 3 76.2 3.60 91.4 150 1.03 7 178 29 737 2.16 3.21

20019301 4 101.6 4.64 117.9 150 1.03 10 254 29 737 3.05 4.54

For Continental ContiTech food hose compliance information, see Appendix C.

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

4 Food Transfer

Plicord® Gray Food


ApplicationA flexible hose for gravity flow, pressure, or suction service

transferring edibles from tank truck and in-plant service.



CoverGray Chemivic™ synthetic rubber (wrapped impression)




Branding (Spiral)Example: Continental ContiTech Plicord® Gray Food; FDA,

3-A, and USDA 150 psi


recommendations and coupling procedure.

Order Codes549-834

Plicord® Gray Food


Gray in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m

20020211 1 25.4 1.45 36.7 150 1.03 3 75 29 737 0.58 0.86

20020212 1f 38.1 1.97 50.0 150 1.03 4 102 29 737 0.85 1.26

20020214 2 50.8 2.59 65.8 150 1.03 5 114 29 737 1.42 2.11

20020216 2f 63.5 3.09 78.5 150 1.03 6 152 29 737 1.77 2.63

20020217 3 76.2 3.59 91.2 150 1.03 7 178 29 737 2.10 3.13

20020219 4 101.6 4.68 118.9 150 1.03 10 254 29 737 3.19 4.75


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

5 Food Transfer

Gray Flextra® LT


ApplicationA lightweight, highly flexible hose used for transferring edibles

in gravity flow, pressure or suction service. Larger ID sizes (5”

and 6”) applicable as “must” hoses in the wine industry.

Construction TubeWhite Chemivic™ (complies with FDA, USDA and 3-A)

CoverGray Chemivic™ (corrugated, wrapped impression)

ReinforcementSynthetic textile fabric plies and two galvanized wire helix


PackagingCoiled-polyethylene wrapped/bagel pack

Branding (Spiral)Example: Continental ContiTech Gray Flextra® LT 150 psi

WP; FDA, 3-A and USDA


recommendation and coupling procedure.

Order Codes549-357

Gray Flextra® LT



20155751 1f 38.1 1.92 48.8 150 1.03 3 64 29 737 0.77 1.15

20134015 2 50.8 2.44 62.0 150 1.03 3 76 29 737 1.00 1.49

20313545 2f 63.5 3.00 76.2 150 1.03 5 127 29 737 1.46 2.17

20070367 3 76.2 3.51 89.2 150 1.03 6 140 29 737 1.95 2.90

20131039 4 101.6 4.55 115.6 150 1.03 7 191 29 737 2.59 3.85

20129912 5 127.0 5.66 143.8 150 1.03 12 305 29 737 3.84 5.71

20129913 6 152.4 6.66 169.2 150 1.03 17 432 29 737 4.55 6.77


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

6 Food Transfer

Exstatic®


ApplicationExstatic® hose is for tank truck and/or in-plant transfer of

dry, bulk foodstuffs where there is a potential for electrical

static build-up.

Construction TubeFDA UHMWPE (static dissipating/static conductive) has

FDA/USDA compliant materials

CoverBlue SBR synthetic rubber (corrugated) / spiral transfer

brand (wrapped impression)

ReinforcementSpiral-plied synthetic fabric with double wire helix



Branding (Spiral)Example: Continental ContiTech Plicord® Exstatic® FDA Dry

Material handling 150 psi


recommendation and coupling procedure. Use Continental

ContiTech Insta-Lock™ Cam & Groove Fittings with this

product. See the Couplings Systems information pages at

the back of the catalog.

Order Codes549-608

Exstatic®


Blue in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m

20019899 2 50.8 2.50 63.5 150 1.03 8 203 29 737 1.07 1.59

20019901 3 76.2 3.56 90.4 150 1.03 12 305 29 737 1.83 2.72

20019904 4 101.6 4.59 116.6 150 1.03 16 406 29 737 2.49 3.71

20019905 5 127.0 5.67 144.0 150 1.03 20 508 29 737 3.69 5.49


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

7 Food Transfer

Harvest®


ApplicationFor tank truck and/or in-plant applications for the transfer of

dry, non-oily bulk foodstuffs.

Construction TubeFDA, White Pureten™ (natural rubber) (FDA/USDA compliant


CoverGray EPDM synthetic rubber (corrugated) / orange branding

tape (wrapped impression)

ReinforcementSpiral-plied synthetic fabric with double galvanized wire helix



Branding (Spiral)Example: Continental ContiTech Harvest® 150 psi WP;

FDA/USDA



Order Codes549-627

Harvest®



20019927 2 50.8 2.73 69.3 150 1.03 5 127 29 737 1.57 2.34

20019928 3 76.2 3.74 95.0 150 1.03 7 178 29 737 2.32 3.45

20019929 4 101.6 4.78 121.4 150 1.03 10 254 29 737 3.44 5.12

20019930 5 127.0 5.91 150.1 150 1.03 15 381 29 737 4.76 7.08


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

8 Food Transfer

Nutriflo® Suction and Discharge Hose


ApplicationFor handling almost every type of dry bulk food material

or liquid in gravity flow and vacuum service. Nutriflo®

conforms to USDA Meat and Poultry, 3-A Sanitary, and FDA

Standards, and is used for the transmission of raw and

pasteurized milk and other high water content dairy items.

Construction TubeClear Pliovic® (FDA, 3-A, USDA compliant), NSF-61

CoverClear Pliovic®

ReinforcementWhite or Clear high-density Pliovic® helix



BrandingNot branded



Order Codes586-416 (white)

586-421 (clear)

Nutriflo® Suction and Discharge


White Clear in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m

20013266 20328013 3/4 19.1 0.99 25.2 120 0.83 3 83 29 737 0.18 0.27

20013269 20013329 1 25.4 1.24 31.5 106 0.73 5 114 29 737 0.26 0.39

20013274 20013330 1e 31.8 1.55 39.4 99 0.68 5 127 29 737 0.36 0.54

20013279 20013331 1f 38.1 1.78 45.2 89 0.61 6 152 29 737 0.43 0.64

20013283 20013332 2 50.8 2.37 60.2 79 0.54 8 203 29 737 0.67 1.00

20013287 20013333 2f 63.5 2.89 73.4 65 0.45 10 254 29 737 0.89 1.32

20013290 20013334 3 76.2 3.48 88.4 65 0.45 12 305 29 737 1.15 1.71

20013293 20013335 4 101.6 4.50 114.3 55 0.38 16 406 29 737 1.65 2.46

20013297 20013337 6 152.4 6.63 168.4 47 0.32 36 914 29 737 3.39 5.04


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

9 Food Transfer

Nutriflex™ Suction and Discharge Hose


ApplicationNutriflex™ S&D hose is capable of handling almost every

type of dry bulk food material or liquid in gravity flow and

vacuum service. Nutriflex™ conforms to USDA Meat and

Poultry, 3-A Sanitary, and FDA Standards, and is used for

transmission of raw and pasteurized milk and other high

water content dairy items.


CoverClear Pliovic® (corrugated construction)

ReinforcementClear high-density rigid Pliovic® helix



BrandingNot branded




586-422 (clear)

Nutriflex™ Suction and Discharge


White Clear in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m

20013300 20013338 1 25.4 1.29 32.8 60 0.41 2 38 29 737 0.22 0.33

20013303 20013339 1e 31.8 1.56 39.6 50 0.34 3 64 29 737 0.28 0.42

20013306 20013340 1f 38.1 1.88 47.8 50 0.34 4 81 29 737 0.31 0.46

20013309 20013341 2 50.8 2.43 61.7 40 0.28 4 81 29 737 0.51 0.76

20013311 20013342 2f 63.5 3.00 76.2 35 0.24 5 114 29 737 0.82 1.22

20013313 20013343 3 76.2 3.58 90.9 35 0.24 7 165 29 737 1.05 1.56

20013315 20013344 4 101.6 4.71 119.6 35 0.24 10 264 29 737 1.67 2.49

20118679 20013345 6 152.4 6.72 170.7 25 0.17 30 747 29 737 2.27 3.38


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

10 Food Transfer

Nutriflex™ Static Wire


ApplicationFor handling almost every type of dry bulk food material or

liquid in gravity flow and vacuum service. Nutriflex™ Static

Wire conforms to USDA Meat and Poultry, 3-A Sanitary, and

FDA Standards, and is recommended for transmission of

powder pellets or granular materials.


CoverClear Pliovic® (corrugated construction) static wire placed

between the tube and cover

ReinforcementClear, high-density Pliovic® helix



BrandingNot branded



Order Codes586-472

Nutriflex™ Static Wire


Clear in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m

20050287 1e 31.8 1.56 39.6 50 0.34 3 64 29 737 0.29 0.43

20013602 1f 38.1 1.84 46.8 50 0.34 4 81 29 737 0.36 0.54

20119161 1g 44.5 2.09 53.1 45 0.31 4 81 29 737 0.40 0.60

20013603 2 50.8 2.43 61.7 40 0.28 4 89 29 737 0.52 0.77

20013604 2f 63.5 3.00 76.2 35 0.24 5 114 29 737 0.80 1.19

20013605 3 76.2 3.58 90.9 35 0.24 7 165 29 737 1.09 1.62

20013606 4 101.6 4.65 118.1 35 0.24 11 264 29 737 1.51 2.25

20013607 5 127.0 5.75 146.1 35 0.24 22 559 29 737 2.15 3.20

20013608 6 152.4 6.87 174.5 25 0.17 30 747 28 711 2.98 4.43


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

11 Food Transfer

Plicord® Blue Flour


ApplicationTank truck or in-plant service hose is for discharge transfer

of abrasive materials and dry foods such as flour, cake

mixes, etc.

Construction Tube3/16" gauge white Pureten™ tube (FDA compliant)

CoverBlue SBR rubber (wrapped impression)

ReinforcementSpiral-plied synthetic fabric with 2 antistatic wires



Branding (Spiral)Example: Continental ContiTech Plicord® Blue Flour

Discharge FDA 150 psi



Order Codes549-503


Plicord® Blue Flour

SAP # ID Nom. OD Max. WP Weight

Blue in. mm in. mm psi MPa lb./ft. kg/m

20019792 2 50.8 2.68 68.1 150 1.03 1.39 2.07

20019794 3 76.2 3.69 93.7 150 1.03 2.02 3.01

20019795 4 101.6 4.71 119.6 150 1.03 2.63 3.91

20019796 5 127.0 5.72 145.3 150 1.03 3.27 4.87

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

12 Food Transfer

Plicord® Brewline


ApplicationA quality discharge hose designed specifically for the highly

demanding service of transferring non-oily liquid products

in wineries and breweries.

Construction TubeWhite chlorobutyl rubber (FDA/USDA compliant and

conforms to 3-A Sanitary Standard 18-03)

CoverRed EPDM with a white spiral stripe (wrapped impression)

ReinforcementSpiral-plied synthetic fabric, 4 plies to 1f” ID; 6 plies over

1f” ID



BrandingExample: Continental ContiTech Plicord® Brewline® hose

250 psi; FDA, 3-A and USDA



Order Codes549-885 Red Cover

549-003 Microban with Red Cover


Plicord® Brewline


Red in. mm in. mm psi MPa lb./ft. kg/m

20020324 3/4 19.1 1.34 34.0 250 1.72 0.54 0.80

20020327 1 25.4 1.69 42.9 250 1.72 0.81 1.21

20032192 1e 31.8 2.00 50.8 250 1.72 1.05 1.56

20020335 1f 38.1 2.23 56.6 250 1.72 1.19 1.77

20020341 2 50.8 2.88 73.2 250 1.72 1.86 2.77

20020345 2f 63.5 3.51 89.2 250 1.72 2.66 3.96

20020348 3 76.2 4.09 103.9 250 1.72 3.57 5.31

20020352 4 101.6 5.31 134.9 250 1.72 5.43 8.08

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

13 Food Transfer

Plicord® ExtremeFlex™ Food Grade


White Gray in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m

20478040 20483718 2 51.2 2.4 62.0 150 1.03 2 51 29 737 1.00 1.48

20478043 20483781 3 76.1 3.5 89.9 150 1.03 3 76 29 737 1.89 2.79

20478044 20483782 4 102.1 4.6 116.6 150 1.03 4 102 29 737 2.69 3.98

Plicord® ExtremeFlex™ Food Grade


ApplicationA high-tech, flexible corrugated hose with pretzel-like agility

and proven performance. Best of all, it is available at a

non-corrugated price, making it a great value. With

ExtremeFlex™, there’s even more to appreciate:

› Flexible Handling: Easier to move in and out of tight

spaces and around sharp corners.

› Lightweight: Easier to lift and carry, so there are fewer

workplace injuries.

› Lower Force to Bend: Easier to connect and disconnect,

keeping productivity high.



CoverWhite or gray Chemivic™ corrugated synthetic rubber

(wrapped impression)


Temperature Range-25°F to 212˚F (- 32˚C to 100˚C)

PackagingCoiled and polywrapped

Branding (Spiral)Continental ContiTech Plicord® ExtremeFlex™ Food Grade

150 psi WP


recommendations and coupling procedure

Non-Stock/Sizes400’ minimum order


549-164 (gray)


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

14Food Transfer

Plicord® Wineline®


ApplicationA quality, non-toxic hose for handling wine, potable water,

and other non-oily liquid food products where the hose

must meet FDA requirements. For discharge service

and suction service up to 20" hg vacuum at ambient

temperature.

Construction TubeWhite chlorobutyl rubber (FDA/USDA compliant and

conforms to 3-A Sanitary Standard 18-03)

CoverWhite EPDM rubber with a purple spiral stripe (wrapped

impression)

ReinforcementSpiral-plied synthetic fabric, 4 plies to 1f" ID; 6 plies over

1f" ID



Branding (Spiral)Example: Continental ContiTech Plicord® Wineline® hose

250 psi; FDA, 3-A, and USDA



Order Codes549-887

Plicord® Wineline®


White in. mm in. mm psi MPa lb./ft. kg/m

20020367 3/4 19.1 1.39 35.3 250 1.72 0.60 0.89

20020371 1 25.4 1.69 42.9 250 1.72 0.80 1.19

20099578 1e 31.8 2.00 50.8 250 1.72 1.04 1.55

20020376 1f 38.1 2.23 56.6 250 1.72 1.20 1.79

20020379 2 50.8 2.92 74.2 250 1.72 1.98 2.95

20020380 2f 63.5 3.50 88.9 250 1.72 2.65 3.94

20020382 3 76.2 4.09 103.9 250 1.72 3.55 5.28

20031599 4 101.6 5.30 134.6 250 1.72 5.40 8.04


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

15 Food Transfer

Pliovic® FG (FDA-3A)


Clear in. mm in. mm psi MPa lb./ft. kg/m

20129509 1/4 6.4 0.44 11.2 250 1.72 0.05 0.07

20129600 5/16 7.9 0.50 12.7 250 1.72 0.07 0.10

20129601 3/8 9.5 0.59 15.0 250 1.72 0.08 0.12

20129602 1/2 12.7 0.75 19.1 200 1.38 0.12 0.18

20129603 5/8 15.9 0.87 22.1 200 1.38 0.15 0.22

20337878 3/4 19.1 1.02 25.9 150 1.03 0.19 0.28

20316305 1 25.4 1.34 34.0 125 0.86 0.31 0.46

20463346 1e 31.75 1.72 43.6 125 0.86 0.60 0.89

20463340 1f 38.1 1.98 50.2 125 0.86 0.72 1.07

Pliovic® FG (FDA-3A)


ApplicationA versatile, lightweight, reinforced tubing for the food and

beverage, general air, multipurpose, pharmaceutical and

cosmetics industries; computer component manufacturers;

textile mills; and air-actuated equipment.

Construction TubeClear Pliovic® compound, conforms to FDA, USDA, NSF-61

and 3-A standards

CoverClear Pliovic® compound, conforms to FDA, USDA, NSF-61

and 3-A standards

ReinforcementSpiral synthetic yarn


Packaging1/4"-5/8" – 300’ Bagel Pack, one piece

3/4" and 1" – 200’ Bagel Pack, one piece

BrandingExample: Continental ContiTech Pliovic® FG FDA & 3-A

Compliant 3/8” ID (9.5mm) 250 psi WP (1.7 MPa). Made

in U.S.A.



Non-Stock/SizesContact customer service for availability on cut, coiled and

tied hose lengths.

Order Codes540-337


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

16 Food Transfer

Potable Water


ApplicationDesigned to handle water suitable for drinking. Used in

oilfield or industrial applications. Used in discharge service

only. This hose is not NSF approved.

Construction TubeWhite natural rubber (complies with FDA requirements)

CoverBlue SBR (smooth, wrapped impression)

ReinforcementSynthetic textile fabric plies


PackagingCoiled-polyethylene wrapped/bagel pack

Branding (Spiral)Example: Continental ContiTech Potable Water Hose



Order Codes542-445

Potable Water



20016702 1 25.4 1.49 37.9 250 1.72 0.55 0.82

20016704 1f 38.1 1.98 50.3 250 1.38 0.77 1.15

20016706 2 50.8 2.50 63.5 150 1.03 0.96 1.43

20344236 3 76.2 3.58 91.0 150 1.03 1.72 2.56

20016709 4 101.6 4.56 115.8 150 1.03 1.99 2.96


Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

17 Food Transfer

Vintner™


ApplicationFor handling in-plant and/or tank truck transfer of wine,

beer, potable water and other non-oily, liquid foodstuffs.

Construction TubeWhite chlorobutyl (FDA/USDA compliant and conforms to

3-A Sanitary Standard 18-03)

CoverGray EPDM synthetic rubber (wrapped) / purple branding tape

ReinforcementSpiral-plied synthetic fabric with Monofilament Helix

Temperature Range-30°F to 220°F (- 34°C to 104°C)


Branding (Spiral)Example: Continental ContiTech Plicord® Vintner™ 250 psi;

FDA, 3-A, and USDA




tied hose lengths.

Order Codes549-886 White Cover

549-009 Red Microban Cover


Vintner™



20020354 1 25.4 1.62 41.1 250 1.72 3 76 27 686 0.71 1.06

20020356 1f 38.1 2.11 53.6 250 1.72 4 102 27 686 0.98 1.46

20020361 2 50.8 2.68 68.1 250 1.72 7 178 27 686 1.38 2.05

20020362 2f 63.5 3.21 81.5 250 1.72 10 254 27 686 1.78 2.65

20020365 3 76.2 3.85 97.8 250 1.72 12 305 27 686 2.59 3.86

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

18 Food Transfer

EZ GLIDE WINE™


ApplicationEZ Glide Wine by ContiTech is a quality, nontoxic hose for

handling wine, potable water, and other non oily liquid food

products where the hose must meet FDA requirements. For

discharge service and suction service up to 20" hg vacuum

at ambient temperature.

Construction TubeWhite chlorobutyl rubber (FDA/USDA compliance and

conforms to 3-A sanitary standard 18-03),

non-phthalates compound

CoverGrey Chemivic® rubber and green outer helix

ReinforcementSynthetic fabric piles

Temperature Range-20 F to 180 F (Max 200 for cleaning purposes only)

Branding (Spiral)Example: Continental ContiTech Vintner™ hose



Order Codes549-646

Vintner™



20829361 1f 38.1 2.06 52.4 150 1 3 76 20 508 .93 1.38

20829362 2 50.8 2.59 65.9 150 1 3 76 20 508 1.22 1.88

20829262 3 76.2 3.61 91.7 150 1 5 127 20 508 1.85 2.74

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

19 Food Transfer

Plicord® ExtremeFlex™ Beverage Gray


ApplicationFor beer, wine, distillery and beverage (edible liquid) transfer

processing facilities. Ideal for applications requiring flexibile

and/or tight bend connections.

Construction TubeWhite Chlorobutyl (FDA/USDA compliant & conforms to a


CoverCorrugated grey chemical (wrapped impression)

ReinforcementSpiral-plied fabrics wih double galvanized helix wire


CouplingsTri-Clamp or Sanitary ends are typically used with this hose

Order Codes549-603 Gray Cover

549-004 Red Microban Cover

Plicord® ExtremeFlex™ Beverage Gray

Part #

ID Nom. OD Max. WP Bend RadiusVacuum HG @ 72°F Weight

in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m

20762678 1 25.4 1.56 39.7 250 1.72 1.5 38 29 737 0.73 1.09

20762679 1f 38.1 2.02 51.3 250 1.72 2.3 57 29 737 0.92 1.38

20762751 2 50.8 2.53 64.2 250 1.72 3.0 76 29 737 1.20 1.79

20762752 3 76.2 3.59 91.2 200 1.38 4.5 114 29 737 2.02 3.01

20762753 4 101.6 4.60 116.8 150 1.03 6.0 152 29 737 2.76 4.11

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

20 Food Transfer

Plicord® ExtremeFlex™ Beverage Red with EZ Clean Cover


ApplicationFor beer, wine, distillery and beverage (edible liquid) transfer

processing facilities. Ideal for applications requiring flexibile

and/or tight bend connections.

Construction TubeWhite Chlorobutyl (FDA/USDA compliant & conforms to a


CoverCorrugated grey chemical (wrapped impression), New

corrugated red EZ Clean UHMWPE cover (semi-smooth

finish)

ReinforcementSpiral-plied fabrics wih double galvanized helix wire


CouplingsTri-Clamp or Sanitary ends are typically used with this hose

Order Codes549-605 EZ Clean Red Cover

Plicord® ExtremeFlex™ Beverage Red

Part #

ID Nom. OD Max. WP Bend RadiusVacuum HG @ 72°F Weight


20776605 1 25.4 1.52 38.7 250 1.72 2 51 29 737 0.65 0.96

20762754 1f 38.1 2.03 51.6 250 1.72 3 76 29 737 0.93 1.38

20752524 2 50.8 2.537 64.5 250 1.72 4 102 29 737 1.21 1.80

20762758 3 76.2 3.601 91.5 200 1.38 6 152 29 737 2.03 3.02

20762760 4 101.6 4.607 117 150 1.03 8 203 29 737 2.77 4.12

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

21 Food Transfer

Tan Flexwing®


ApplicationTan Flexwing® is for acids, alcohol bases and salt solutions.

Construction TubeTan Pureten™ gum rubber (non oil-resistant) (FDA/USDA

compliant)

CoverTan SBR synthetic rubber (non oil-resistant) with blue spiral

stripe (wrapped impression)

ReinforcementSpiral-plied synthetic fabric with wire helix


Packaging100' lengths, coiled and polywrapped

Branding (Spiral)Example: Continental ContiTech Tan Flexwing® with

Pureten™ 150 psi WP



Order Codes549-986

Tan Flexwing®

Material

ID Nom. OD Max. WP Bend Radius Vacuum HG Weight


20790764 2 50.8 2.68 68.1 150 1.03 5.0 127 29 737 1.44 2.14

20790765 3 76.2 3.75 95.3 150 1.03 7.0 178 29 737 2.32 3.45

20790766 4 101.6 4.83 122.7 150 1.03 10.0 254 29 737 3.39 5.04

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

22 Food Transfer

Tan Flextra®


ApplicationFor tank truck and in-plant service. Used to convey non-oily

abrasive materials such as sand, limestone, plastic pellets

and dry abrasive food products

Construction TubePureten™ gum rubber (non oil-resistant) (FDA/USDA

compliant)

CoverTan SBR gum rubber (corrugated) with yellow spiral stripe

(wrapped impression)

ReinforcementSpiral-plied synthetic fabric with wire helix

Temperature Range-40°F to 180°F (-40°C to 82°C)


Branding (Spiral)Example: Continental ContiTech Tan Flextra® with Pureten™

75 psi WP




tied hose lengths.

Order Codes549-987

Tan Flextra®

Material

ID Nom. OD Max. WP Bend Radius Vacuum HG Weight


20790761 2 50.8 2.60 66.0 75 0.52 4 102 29 737 1.21 1.80

20790762 3 76.2 3.63 92.2 75 0.52 6 152 29 737 1.94 2.89

20790763 4 101.6 4.69 119.1 75 0.52 9 229 29 737 2.74 4.08

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

23 Food Transfer

Tan Softwall


ApplicationA fabric-reinforced hose for the discharge of non-oily

abrasive materials such as sand, limestone, gravel, plastic

pellets and dry food products. For use where static

electrical buildup is not a problem.

Construction TubeTan Pureten™ gum rubber (FDA/USDA compliant)

CoverTan SBR synthetic rubber (wrapped impression)

ReinforcementSpiral-plied synthetic fabric with static wire


Packaging100’ lengths, coiled and polywrapped

Branding (Spiral)Example: Continental ContiTech Tan Softwall with Pureten™

75 psi WP



Order Codes549-988

Tan Softwall

Material

ID Nom. OD Max. WP Weight

in. mm in. mm psi MPa lb./ft. kg/m

20790767 3 76.2 3.69 93.7 75 0.52 1.80 2.68

20790768 4 101.6 4.78 121.4 75 0.52 2.61 3.88

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

24 Food Transfer

Velocity Beverage Transfer Hose


ApplicationVelocity (BT) Beverage Transfer has USDA, FDA and NSF

approved materials. Ideal for applications needing

lightweight, flexible PVC hose such as wineries and

microbreweries

Construction TubeClear Pliovic compound, conforms to FDA, USDA and

3-A standards

CoverClear Pliovic compound

ReinforcementPolyester synthetic yarn

HelixWhite rigid PVC compound


Order Codes591-103

Velocity Beverage Transfer Hose

Material

ID Nom. OD Max. WP Weight VacuumBend Radius

in. mm in. mm psi MPa lb./ft. kg/m in. mm in.

20806470 1.5 38.1 2.03 51.7 110 0.76 0.65 0.97 29 737 2.5

20806471 2 50.8 2.46 62.5 100 0.69 0.71 1.06 29 737 4

20806472 3 76.2 3.71 94.2 100 0.69 1.42 2.12 29 737 6

20810398 4 101.6 4.75 120.6 75 0.52 1.85 2.75 29 737 7

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

25 Food Transfer

Food Hose Recommendation Guide – Specific Hose Application Capabilities

Tube: Compound Tube: Color Hose Name

Food

Chemivic White White Flexwing, White Flextra, Gray Flextra LT, Gray Food White Softwall

Pureten Tan Flexwing, Tan Flextra, Tan Softwall

Pureten White Blue Flour Discharge, Harvest

Chlorobutyl White Wineline, Brewline, Vintner

Pliovic Clear Pliovic FG, Nutriflo, Nutriflex, Nutriflex SW

(B)

Beet Sugar, Granular I A A X B

Buttermilk, Dried X A A X B

(C)

Cane Sugar, Granular I A A X B

Cashew Nut Oil A X X X X

Castor Oil A X X X X

Citric Acid A A A A B

Cocoa Butter A X X X I

Coconut Oil A X X X X

Corn Oil A X X X X

Cottonseed OIl A X X X X

(F)

Fish Meal A X X X B

Flour I A A X

(G)

Grape Juice A X X A B

(L)

Lactic Acid A B B B X

Lard OIl A X X X X

Linseed Oil A X X X X

Liquor (Spirits) B X X X B

(M)

Milk A X X A B

Mineral OIl A X X X B

Molasses A A A A A

(O)

OIlve Oil A X X X X

Orange Juice A X X A A

(P)

Palm Oil A X X X X

Paraffin A X X X B

Peanut Oil A X X X X

Potato Flour I A A A A

(S)

Salt, Granular, Table Grade I A A X A

Shortening A X X X I

Soybean Oil A X X X X

Sucrose A A A X A

Sugar, Granulated I A A X A

Sugar, Syrup A A A A A

(T)

Tallow A X X X X

Tomato Juice, Paste & Puree Sauce A X X I B

(V)

Vegetable OIl A X X X X

Vinegar A X X A A

(W)

Water, Potable A X X A A

Whiskey B X X X X

Wine A X X A I

Food Transfer

Key: A – Excellent; B – Good; X – Not recommended; I – Insufficient information.

Note: For temperatures in excess of 150˚F (66˚C), consult Customer Service.

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

26 Food Washdown

Food Washdown

*Non-black colors.

PageNon- Marking

Superior OIl Resisance Tube and Cover

Superior Abrasion Cover

Anti Microbial Cover

Tapered Nozzle Wire Textile

Blue Fortress 300 96 Yes Yes Yes Yes Yes

Fortress 300 93 Yes Yes Yes Yes Yes



Gauntlet 1500 62 Yes* Yes Yes Yes

Plicord Washdown 262 Yes Yes

Sani-Wash 300 98 Yes Yes

Sani-Wash Plus 300 97 Yes Yes Yes

Super Sani-Wash 300 99 Yes Yes Yes

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

27 Food Washdown

Fortress® 300 with Microban® Product Protection


ApplicationA high-quality construction for hot water up to 200˚F (93˚C)

for cleanup service in food processing plants, dairies, packing

houses, bottling plants, breweries, canneries and creameries.

Its super abrasion and oil-resistant cover provides maximum

protection against the adverse effects of oil and animal

fats. The cover of our Fortress® 300 hose incorporates

Microban’s®* antimicrobial built-in product protection.

Construction TubeBlack Nitrile synthetic rubber

CoverYellow Carbryn™ synthetic rubber, RMA Class A (High Oil

Resistance) with Microban® product protection



Packaging1/2"-3/4" – 500’ reels, maximum 3 pieces, 50’ increments

1" – 450’ reels, maximum 3 pieces, 50’ increments

BrandingExample: Fortress® 300 with Microban® Antimicrobial

Product Protection 3/8” 300 psi WP. Made in U.S.A.

Continental ContiTech

CouplingsUse Continental ContiTech pressure washing fittings with

this product. See the Coupling Systems information pages

at the back of the catalog for available sizes. Refer to the

Continental ContiTech Hose Assembly Manual for crimp

procedures. Coupled lengths with MxMS fittings and Kink

Guards available.


tied hose lengths.

Order Codes569-120 (yellow)

Fortress® 300


Yellow in. mm in. mm psi MPa lb./ft. kg/m

20135640 1/2 12.7 0.90 22.8 300 2.07 0.29 0.43

20135644 5/8 15.9 1.06 27.0 300 2.07 0.36 0.54

20135645 3/4 19.1 1.19 30.2 300 2.07 0.41 0.61

20135646 1 25.4 1.50 38.1 300 2.07 0.60 0.89

*Microban® antimicrobial product protection inhibits the growth of bacteria, mold and fungi that can cause odor, stains or

degradation of the hose cover.

Microban® is intended to protect the hose cover only. It is not a substitute for good sanitary practices.

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

28 Food Washdown


ApplicationFor use on pressure washer machines with working

pressures up to 1000 psi. Applications include washdown

service in food processing plants, dairies, packing houses,

bottling plants, breweries, canneries and creameries. Its

super abrasion and oil-resistant cover provides maximum

protection against the adverse effects of oil and animal fats.

The cover of our Fortress® Washdown hose incorporates


Construction TubeNitrile synthetic rubber

CoverCarbryn™ synthetic rubber, RMA Class A (High Oil


ReinforcementBraided (1) synthetic yarn


Packaging500’ reels, maximum 3 pieces, 50’ increments: coupled

lengths available






Order Codes536-575 (yellow)

536-583 (red)

536-481 (blue)


Fortress® 1000



20451915 1/4 6.4 0.59 15.0 1000 6.9 0.12 0.18

20139345 3/8 9.5 0.75 19.1 1000 6.9 0.18 0.27

20141359 1/2 12.7 0.86 21.8 1000 6.9 0.20 0.30

20141420 3/4 19.1 1.20 30.5 1000 6.9 0.42 0.62

*Microban® Antimicrobial Product Protection inhibits the growth of bacteria, mold and fungi that can cause odor, stains or



Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

29 Food Washdown



ApplicationFortress® 3000 is for use on pressure washer machines

with working pressures up to 3000 psi. Applications include

washdown service in food processing plants, dairies, packing



protection against the adverse effects of oil and animal

fats. The cover of Fortress® Washdown hose incorporates


Construction TubeNitrile synthetic rubber

CoverCarbryn™ synthetic rubber, RMA Class A (High Oil

Resistance) with Microban® built-in product protection

ReinforcementBraided (1) steel wire


Packaging500’ reel, maximum 3 pieces, 50’ increments: coupled

lengths available




CouplingsUse Continental ContiTech pressure washing fittings with

this product. See the Coupling Systems information pages

at the back of the catalog for available sizes. Refer to the

Continental ContiTech Hose Assembly Manual for crimp

procedures. Coupled lengths with MxMS fittings and Kink

Guards available.

Order Codes539-400 (Yellow)

539-401 (Blue)

Fortress® 3000



20141421 1/4 6.4 0.53 13.5 3000 20.69 0.15 0.22

20139340 3/8 9.5 0.69 17.5 3000 20.69 0.24 0.36

20141423 1/2 12.7 0.82 20.8 3000 20.69 0.32 0.48




Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

30 Food Washdown

Blue Fortress® 300 with Microban® with FDA Compliant White Tube

Blue Fortress® 300 with FDA Compliant White Tube



20189064 1/2 12.7 0.90 22.8 300 2.07 0.30 0.45

20630248 5/8 15.8 1.06 26.9 300 2.07 0.37 0.62

20190318 3/4 19.1 1.19 30.2 300 2.07 0.44 0.65

20459020 1 25.4 1.50 38.1 300 2.07 0.57 0.95


ApplicationA high-quality construction for hot water up to 200˚F (93˚C)

cleanup service in food processing plants, dairies, packing



protection against the adverse effects of oil and animal fats.

The cover of our Blue Fortress® 300 hose incorporates

Microban’s® antimicrobial built-in product protection. The

white tube is comprised of FDA compliant materials.

Construction TubeWhite FDA compliant nitrile synthetic rubber

CoverBlue Carbryn™ synthetic rubber, RMA Class A (High Oil




PackagingBulk






Order Codes569-121


degradation of the hose cover. Microban® is intended to protect the hose cover only. It is not a substitute for good sanitary practice.

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

31 Food Washdown

Sani-Wash™ Plus 300


ApplicationA high-quality, economical construction for hot water up

to 200˚F (93˚C) cleanup service in food processing plants,

dairies, packing houses, bottling plants, breweries, canneries

and creameries.

Construction TubeBlack Nitrile synthetic rubber, RMA Class A (High Oil

Resistance), non-FDA

CoverWhite Chemivic™ synthetic rubber, RMA Class A (High Oil

Resistance)





BrandingExample: Sani-Wash™ Plus (19.1mm) 300 psi WP. Made in

U.S.A. Continental ContiTech



Order Codes569-019

Sani-Wash™ Plus 300



20026069 1/2 12.7 0.91 23.1 300 2.07 0.27 0.40

20026071 3/4 19.1 1.18 30.0 300 2.07 0.40 0.60

20026078 1 25.4 1.50 38.1 275 1.90 0.60 0.89

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

32 Food Washdown

Sani-Wash™ 300


ApplicationAn economical hose for hot water washdown up to 205˚F (96˚C) cleanup in food processing plants, dairies, packing houses, bottling plants, breweries, canneries and creameries.

Construction TubeEPDM synthetic rubber

CoverWhite EPDM synthetic rubber

ReinforcementTextile reinforced




BrandingExample: Continental ContiTech Sani-Wash™ 300 psi WP 3/4” (19.1mm). Made in U.S.A.



Order Codes569-020

Sani-Wash™ 300



20070992 1/2 12.7 0.84 21.3 300 2.07 0.26 0.39

20136571 5/8 15.9 1.00 25.4 300 2.07 0.31 0.46

20070993 3/4 19.1 1.17 29.7 300 2.07 0.42 0.63

20070994 1 25.4 1.47 37.3 300 2.07 0.62 0.92

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

33 Food Washdown

Super Sani-Wash™ 300


ApplicationAn economical hose for hot water washdown up to 200°F

(93°C) cleanup in food processing plants, dairies, packing


The cover of the Super Sani-Wash™ Washdown hose

incorporates Microban’s® antimicrobial built-in product

protection.

Construction TubeEPDM synthetic rubber

CoverWhite EPDM synthetic rubber with Microban® product

protection

ReinforcementSpiral textile reinforced

Temperature Range-40°F to 200°F (- 40°C to 93°C)

PackagingReels

BrandingExample: Continental ContiTech Super Sani-Wash™ 300

with Microban® antimicrobial product protection 300 psi

WP. 3/4” (19.1mm). Made in U.S.A.



Non-Stock/SizesFor special production run minimum requirements, see

Appendix C.

Order Codes569-021

Super Sani-Wash™ 300



20449743 1/2 12.7 0.84 21.3 300 2.07 0.26 0.39

20448570 3/4 19.1 1.17 29.7 300 2.07 0.42 0.63

20449746 1 25.4 1.47 37.3 300 2.07 0.62 0.92


degradation of the hose cover. Microban® is intended to protect the hose cover only. It is not a substitute for good sanitary practice.

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

34 Food Washdown

NotesAir & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

35 Food Washdown

207

817

53

ContiTech. Engineering Next Level

As a division of the Continental Group, ContiTech is a recognized innovation and technology leader in natural rubber and plastics. As an industry partner with a firm future ahead of us, we engineer solutions both with and for our customers around the world. Our bespoke solutions are specially tailored to meet the needs of the market. With extensive expertise in materials and processes, we are able to develop cutting-edge technologies while ensuring we make responsible use of resources. We are quick to respond to important technological trends, such as function integration, lightweight engineering and the reduction of complexity, and offer a range of relevant products and services. That way, when you need us, you’ll find we’re already there.

The content of this publication is not legally binding and is provided as information only. The trademarks displayed in this publication are the property of Continental AG and/or its affiliates. Copyright © 2016 ContiTech AG. All rights reserved. For complete information go to: www.contitech.de/discl_en

ContactContiTech NAFTA Headquarters703 S. Cleveland Massillon RoadFairlawn, OH 44333-3023 U.S.A.1-800-235-4632

Canada1-888-275-4397FAX 1-888-464-4397

Mexico1-800-439-7373FAX 1-800-062-0918

www.contitech.us

Powering Business Worldwide

E-1EATON Industrial Hose Master Catalog – NA E-HOOV-MC003-E2 2014

Food and BeverageFood Suction & Discharge

H0350 LION™ Food Transfer . . . . . . . . . . . . . . . . . . . . . E-4H0384 Grey Food Transfer . . . . . . . . . . . . . . . . . . . . . . . E-5EHF002 Liquid Food Suction & Discharge . . . . . . . . . . . E-6

Beverage Suction & DischargeEHF021 Flat Corrugated Alcohol Suction & Discharge . . .E-7EHF020 Alcohol Suction & Discharge . . . . . . . . . . . . . . E-8EHB502 & EHB503 Medium Duty Beer/Wine S & D . . . . E-9

Beverage DischargeEHF006 Softwall Potable Water Discharge . . . . . . . . . . E-10

H285 CLEARFORCE™ – R . . . . . . . . . . . . . . . . . . . . . . E-11 H160 CLEARFORCE™ – NR . . . . . . . . . . . . . . . . . . . . . E-12

Dry Bulk Discharge

H0413 Dry Bulk Discharge . . . . . . . . . . . . . . . . . . . . . . E-13

Cleaning ServiceH1066 Creamery/Packing Washdown . . . . . . . . . . . . . E-14

H9673 WASHDOWN™ 1250 . . . . . . . . . . . . . . . . . . . . E-15 H9610 WASHDOWN™ 1000 . . . . . . . . . . . . . . . . . . . . E-16 H1531 SUPRAFORCE™ . . . . . . . . . . . . . . . . . . . . . . . . E-17

Food

and

Bev

erag

e

E-2 EATON Industrial Hose Master Catalog – NA E-HOOV-MC003-E2 2014

Food Suction & DischargeH0350 LION™ Food Transfer

Application: Suction and discharge of non-dairy food productsTube: Vinyl nitrile Reinforcement: 2-ply fiber helical wire Cover: Vinyl nitrileTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 17,5 bar / 250 psi

H0384 Grey Food Transfer

Application: Suction and discharge of bulk abrasive material for food industryTube: Vinyl nitrile Reinforcement: 2-ply fiber helical wire Cover: Vinyl nitrileTemp: -40°C to +82°C, (-40°F to +180°F) Pressure: 10,5 bar / 150 psi

EHF002 Liquid Food Suction & Discharge

Application: Suction and discharge of milk, vegetable oil and beverages Tube: Vegetable oil resistant NBRReinforcement: High-tensile synthetic textile with a single steel helical wireCover: Synthetic rubberTemp: -40°C to +80°C, (-40°F to +176°F)Pressure: 10,5 bar / 150 psi

Beverage Suction & DischargeEHF021 Flat Corrugated Alcohol Suction & Discharge

Application: S & D of food containing high percentage of alcoholTube: UHMW-PEReinforcement: High-tensile synthetic textile with steel helical wireCover: Flat corrugated EPDM rubberTemp: -40°C to +80°C, (-40°F to +176°F)Pressure: 10,5 bar / 150 psi

EHF020 Alcohol Suction & Discharge

Application: S & D of food containing high percentage of alcohol Tube: UHMW-PEReinforcement: High-tensile synthetic textile with steel helical wireCover: EPDM rubberTemp: -40°C to +80°C, (-40°F to +176°F)Pressure: 10,5 bar / 150 psi

EHB502 & EHB503 Medium Duty Beer/Wine S & D

Application: S & D of beverages; mineral water, beer, fruit juices, wine & liquor Tube: EPDM rubber Reinforcement: High-tensile synthetic textile with steel helical wire Cover: EPDM rubberTemp: -40°C to +120°C, (-40°F to +248°F)Pressure: 7,0-10,5 bar / 100-150 psi

Beverage Suction & DischargeEHF006 Softwall Potable Water Discharge

Application: Discharge of potable waterTube: SBR blend Reinforcement: High-tensile synthetic textileCover: EPDM rubberTemp: -30°C to +70°C, (-22°F to +158°F)Pressure: 8,0-10,0 bar / 115-145 psi

H285 CLEARFORCE™—R

Application: For food and beverage dispensing; and spraying and conveying fertilizer and pesticides Tube: Clear PVC Reinforcement: 2-spiral fiber Cover: Clear PVCTemp: -26°C to +66°C, (-15°F to +150°F)Pressure: 5,0-17,2 bar / 75-250 psi

H160 CLEARFORCE™—NR

Application: Food and beverage dispensing Tube: Clear PVC Cover: Clear PVCTemp: -10°C to +66°C, (-15°F to +150°F)Pressure: 1,3-4,5 bar / 20-65 psi

Dry Bulk DischargeH0413 Dry Bulk Discharge

Application: Discharge of bulk abrasive material for food industry Tube: Natural rubberReinforcement: High-tensile synthetic textile and anti-static copper wire Cover: Natural/SBR blend rubberTemp: -29°C to +71°C, (-20°F to +160°F)Pressure: 3,5 bar / 50 psi

Cleaning ServiceH1066 Creamery/Packing Washdown

Application: Washdown food processing facilities & equipment, not for milk Tube: Nitrile Reinforcement: 2-braid fiber Cover: Pin-pricked vinyl nitrile Temp: -40°C to +82°C, (-40°F to +180°F)Pressure: 13,8 bar / 200 psi

H9673 WASHDOWN™ 1250

Application: Washdown of food processing facilities & equipment Tube: Nitrile Reinforcement: 1- and 2-braid fiber Cover: Vinyl nitrile Temp: -40°C to +82°C, (-40°F to +180°F)Pressure: 86 bar / 1250 psi

H9610 WASHDOWN™ 1000

Application: Washdown of food processing facilities & equipment Tube: Nitrile Reinforcement: 1-braid fiber Cover: Vinyl nitrile Temp: -40°C to +82°C, (-40°F to +180°F)Pressure: 70 bar / 1000 psi

H1531 SUPRAFORCE™

Application: High pressure spray or washdown Tube: Rubber modified thermoplasticReinforcement: 2-spiral fiber Cover: Rubber modified thermoplasticTemp: -12°C to +82°C, (-10°F to +180°F)Pressure: 20,7-28,0 bar / 300-400 psi

Food and Beverage

Food and Beverage


Food and BeverageIntroduction and Safety Information

WARNING: Testing can be dangerous and should be done only by trained personnel using proper tools and

procedures . Failure to follow such procedures might result in serious injury, death, or damage to property .

WARNING: Failure to properly follow the manufacturer’s recommended procedures for the care, maintenance, and

storage of a particular hose may result in its failure to perform in the manner intended and may result in serious injury, death, or damage to property .

WARNING: Consult with the coupling manufacturer to make sure you choose the correct coupling and proper

assembly for the application . Such matching of hose and couplings, and assembling of couplings, should be performed only by trained personnel using proper tools and procedures . Failure to follow manufacturer’s instructions or failure to use trained personnel may result in serious bodily injury and/or property damage .

WARNING: Consider both working pressure and pressure surges when determining “maximum” pressure . Failure to

select a hose that meets both these requirements could lead to end blow-offs, hose leakage, and hose bursting . The result could be serious injury or death . The Eaton hose you choose must meet or exceed the required working pressure, and must have a safety factor to allow for surge pressure .

WARNING: Do not use hose at temperatures that exceed the hose temperature rating . Doing so could deteriorate the

hose, leading to leaks, hose bursting, and end blow-offs . This could result in serious personal injury or death .

WARNING: Selection of the proper hose for the application is essential to the proper operation and safe

use of the hose and related equipment . Inadequate attention to selection of hose for the application can result in serious bodily injury or property damage . In order to avoid serious bodily injury or property damage resulting from selection of the wrong hose, you should carefully review the information in this catalog .

Remove the Guesswork from Selecting, Buying and Using Critical Application Hose• When you are handling easily contaminated or hazardous

material it is critical to select the proper hose . The highvisibility branding and color coding removes the guessworkfrom hose selection .

Environmental Resistance • The tube and cover materials of the Eaton Industrial Hose

are designed to assure maximum life and top value . Theyare sophisticated hoses for demanding jobs .

Built to Make Work Faster, Easier and Safer • Moving and connecting hose several times a day isn’t

easy work . Each of the Industrial Hose is designed to beeasy to handle as safety and job performance will allow .

Honest Value • There is only one way to make hose cost less — build it

cheaper . You won’t find compromises in the Industrial Hose . That’s why we put the Eaton brand name on them .

Food Hose Sanification • Max 120°C for 15 min . with steam -or- Max 50°C for

15 min . with 5% caustic soda .

Food and Beverage Hose Safety InformationImportant!

Food

and

Bev

erag

e



LION™ Food TransferH0350

Refer to warnings and safety information on pages O-1 – O-16.

Use of damaged hose or improper use may result in bodily injury or property damage. Please consult Eaton catalog or Technical Support for proper application.

Construction:

Tube: Vinyl nitrile FDA approved material

Reinforcement: 2-ply fiber with helical wire

Cover: Vinyl nitrile

Operating Temperature:

-40°C to +82°C (-40°F to +180°F)

Application:• For suction and discharge

of non-dairy food products

Markets:• Food processing• Tank truck• Rail car

Type of Couplings:• Cam and groove• Combination nipple

Contact coupling manufacturer for attachment procedure and other coupling recommendations

Part No. Hose I.D. Hose O.D.Max Oper Pressure

Burst Pressure

Minimum Bend Radius Vacuum Weight Length

mtr ft DN mm in mm in bar psi bar psi mm in kPa in/Hg kg/m lbs/ft mtr ft

H035032- 100 51 50,8 2 .00 66,7 2 .63 17,2 250 70 1000 127,0 5 .00 94,8 28 2,38 1 .60 100

H035032- 150 51 50,8 2 .00 66,7 2 .63 17,2 250 70 1000 127,0 5 .00 94,8 28 2,38 1 .60 150

H035048- 100 80 76,2 3 .00 92,1 3 .63 17,2 250 70 1000 317,5 12 .50 94,8 28 3,17 2 .13 100

H035064- 150 102 101,6 4 .00 118,3 4 .66 17,2 250 70 1000 317,5 12 .50 94,8 28 5,24 3 .52 150

r

Food and Beverage – Food Suction &

Discharge


Food

and

Bev

erag

e –

Food

Suc

tion

& D

isch

arge


Grey Food TransferH0384



Construction:

Tube: Vinyl nitrile FDA approved material

Reinforcement: 2-ply fiber with helical wire



-40°C to +82°C (-40°F to +180°F)


of bulk abrasive material for food industry

Markets:• Food processing• Tank truck• Plastic industry




Burst Pressure



H038432- 100 51 50,8 2 .00 66,7 2 .63 10,5 150 41 600 127,0 5 .00 94,8 28 2,15 1 .45 100

H038448- 100 80 76,2 3 .00 92,1 3 .63 10,5 150 41 600 228,6 9 .00 94,8 28 3,27 2 .20 100

H038464- 100 102 101,6 4 .00 117,2 4 .61 10,5 150 41 600 279,4 11 .00 94,8 28 4,69 3 .15 100

r



Liquid Food Suction & DischargeEHF002



Construction:

Tube: Vegetable oil-resistant NBR, FDA approved material

Reinforcement: High-tensile synthetic textile with a single steel helical wire

Cover: Oil, abrasion, ozone, and weather resistant synthetic rubber


-40°C to +80°C (-40°F to +176°F)


of milk, vegetable oil and beverages

Markets:• Food processing• Tank truck• Dairy processing• Milk processing




Burst Pressure



EHF002-12GY- MXX 100 19 19,0 0 .75 31,0 1 .22 10,5 150 31 450 70 2 .76 94,8 28 0,71 0 .48 40-61 100

EHF002-16GY- MXX 100 25 25,4 1 .00 38,0 1 .50 10,5 150 31 450 85 3 .35 94,8 28 0,96 0 .65 40-61 100

EHF002-20GY- MXX 100 31 31,8 1 .25 45,0 1 .69 10,5 150 31 450 100 3 .94 94,8 28 1,23 0 .83 40-61 100

EHF002-24GY- MXX 100 38 38,1 1 .50 52,0 2 .06 10,5 150 31 450 120 4 .72 94,8 28 1,65 1 .11 40-61 100

EHF002-28GY- MXX 100 45 44,5 1 .75 58,5 2 .30 10,5 150 31 450 140 5 .51 94,8 28 1,83 1 .23 40-61 100

EHF002-32GY- MXX 100 51 50,8 2 .00 66,0 2 .60 10,5 150 31 450 160 6 .30 94,8 28 2,29 1 .54 40-61 100

EHF002-40GY- MXX 100 60 63,5 2 .50 78,5 3 .09 10,5 150 31 450 280 11 .02 94,8 28 2,80 1 .88 40-61 100

EHF002-48GY- MXX 100 80 76,2 3 .00 93,0 3 .66 10,5 150 31 450 360 14 .17 94,8 28 3,74 2 .51 40-61 100

EHF002-64GY- MXX 100 102 101,6 4 .00 118,5 4 .67 10,5 150 31 450 450 17 .72 94,8 28 4,73 3 .18 40-61 100

r

* Additional colors available on BK-Black, BU-Blue, or RD-Red

Food and Beverage – Food Suction &

Discharge


Food and BeverageBeverage Suction & Discharge

Flat Corrugated Alcohol Suction & Discharge*EHF021



Construction:

Tube: UHMW-PE FDA approved material

Reinforcement: High-tensile synthetic textile with steel helical wire and anti-static wire

Cover: Flat corrugated EPDM rubber


-40°C to +80°C (-40°F to +176°F)

Application:• For suction and discharge of

food containing high percentage of alcohol

Markets:• Breweries• Distilleries• Food processing




Burst Pressure



EHF021-12RD-* MXX 100 19 19,0 0 .75 29 1 .14 10,5 150 31 450 70 2 .76 94,8 28 0,48 0 .32 40-61 100

EHF021-16RD-* MXX 100 25 25,4 1 .00 36 1 .42 10,5 150 31 450 90 3 .54 94,8 28 0,63 0 .42 40-61 100

EHF021-20RD-* MXX 100 31 31,8 1 .25 43 1 .69 10,5 150 31 450 130 5 .12 94,8 28 0,91 0 .61 40-61 100

EHF021-24RD-* MXX 100 38 38,1 1 .50 50 1 .97 10,5 150 31 450 180 7 .09 94,8 28 1,06 0 .71 40-61 100

EHF021-32RD-* MXX 100 51 50,8 2 .00 64 2 .52 10,5 150 31 450 250 9 .84 94,8 28 1,53 1 .03 40-61 100

EHF021-40RD-* MXX 100 60 63,5 2 .50 78 3 .07 10,5 150 31 450 280 11 .02 94,8 28 2,15 1 .45 40-61 100

EHF021-48RD-* MXX 100 80 76,2 3 .00 91 3 .58 10,5 150 31 450 350 13 .78 94,8 28 2,55 1 .71 40-61 100

EHF021-64RD-* MXX 100 102 101,6 4 .00 119 4 .69 10,5 150 31 450 450 17 .72 94,8 28 4,21 2 .83 40-61 100

EHF021-80RD-* MXX 100 130 127,0 5 .00 148 5 .83 10,5 150 31 450 600 23 .62 80,0 24 6,48 4 .26 40-61 100

r

* Product is not stocked and only available as an MTO item. Additional colors available BK-Black and BU-Blue

Food

and

Bev

erag

e –

Bev

erag

e Su

ctio

n &

Dis

char

ge



Alcohol Suction & Discharge*EHF020



Construction:

Tube: UHMW-PE FDA approved material

Reinforcement: High-tensile synthetic textile with steel helical wire

Cover: EPDM rubber


-40°C to +80°C (-40°F to +176°F)


of food containing high percentage of alcohol

Markets:• Breweries• Distilleries• Food processing




Burst Pressure



EHF020-12RD-* MXX 100 19 19,0 0 .75 31,0 1 .22 10,5 150 31 450 75 2 .95 94,8 28 0,65 0 .44 40-61 100

EHF020-16RD-* MXX 100 25 25,4 1 .00 38,0 1 .50 10,5 150 31 450 100 3 .94 94,8 28 0,86 0 .58 40-61 100

EHF020-20RD-* MXX 100 31 31,8 1 .25 45,0 1 .77 10,5 150 31 450 150 5 .91 94,8 28 1,10 0 .74 40-61 100

EHF020-24RD-* MXX 100 38 38,1 1 .50 52,0 2 .05 10,5 150 31 450 200 7 .87 94,8 28 1,43 0 .96 40-61 100

EHF020-28RD-* MXX 100 45 44,5 1 .75 58,5 2 .30 10,5 150 31 450 260 10 .24 94,8 28 1,75 1 .18 40-61 100

EHF020-32RD-* MXX 100 51 50,8 2 .00 66,0 2 .60 10,5 150 31 450 300 11 .81 94,8 28 2,11 1 .42 40-61 100

EHF020-40RD-* MXX 100 60 63,5 2 .50 78,5 3 .09 10,5 150 31 450 400 15 .75 94,8 28 2,55 1 .71 40-61 100

EHF020-48RD-* MXX 100 80 76,2 3 .00 93,0 3 .66 10,5 150 31 450 800 31 .50 94,8 28 3,47 2 .33 40-61 100

EHF020-64RD-* MXX 100 102 101,6 4 .00 118,5 4 .67 10,5 150 31 450 1200 47 .24 94,8 28 4,52 3 .04 40-61 100

r


Food and Beverage – B

everage Suction & D

ischarge



Medium Duty Beer/Wine Suction & Discharge*EHB502 & EHB503



Construction:

Tube: EPDM rubber FDA approved material

Reinforcement: High-tensile synthetic textile with steel helical wire

Cover: EPDM rubber


-40°C to +120°C (-40°F to +248°F)


of beverages such as mineral water, beer, fruit juices, wine and liquor

Markets:• Food processing• Tank truck• Breweries• Distilleries




Burst Pressure


EHB502 mtr ft DN mm in mm in bar psi bar psi mm in kPa in/Hg kg/m lbs/ft mtr ft

EHB502-12RD-* MXX 100 19 19,0 0 .75 28,5 1 .12 7,0 100 20,7 300 50 1 .97 94,8 28 0,59 0 .40 40-61 100

EHB502-16RD-* MXX 100 25 25,4 1 .00 35,0 1 .38 7,0 100 20,7 300 70 2 .76 94,8 28 0,76 0 .51 40-61 100

EHB502-20RD-* MXX 100 31 31,8 1 .25 43,0 1 .69 7,0 100 20,7 300 90 3 .54 94,8 28 1,00 0 .67 40-61 100

EHB502-24RD-* MXX 100 38 38,1 1 .50 49,0 1 .93 7,0 100 20,7 300 100 3 .94 94,8 28 1,30 0 .87 40-61 100

EHB502-28RD-* MXX 100 45 44,5 1 .75 55,5 2 .19 7,0 100 20,7 300 120 4 .72 94,8 28 1,52 1 .02 40-61 100

EHB502-32RD-* MXX 100 51 50,8 2 .00 62,0 2 .44 7,0 100 20,7 300 140 5 .51 94,8 28 1,71 1 .15 40-61 100

EHB502-40RD-* MXX 100 60 63,5 2 .50 75,0 2 .95 7,0 100 20,7 300 260 10 .24 94,8 28 2,00 1 .34 40-61 100

EHB502-48RD-* MXX 100 80 76,2 3 .00 89,0 3 .50 7,0 100 20,7 300 310 12 .20 94,8 28 2,93 1 .97 40-61 100

EHB502-64RD-* MXX 100 102 101,6 4 .00 115,0 4 .53 7,0 100 20,7 300 420 16 .54 94,8 28 4,06 2 .73 40-61 100

EHB503

EHB503-12RD-* MXX 100 19 19,0 0 .75 31,0 1 .22 10,5 150 31 450 60 2 .36 94,8 28 0,56 0 .38 40-61 100

EHB503-16RD-* MXX 100 25 25,4 1 .00 38,0 1 .50 10,5 150 31 450 75 2 .95 94,8 28 0,72 0 .48 40-61 100

EHB503-20RD-* MXX 100 31 31,8 1 .25 45,0 1 .77 10,5 150 31 450 95 3 .74 94,8 28 0,95 0 .64 40-61 100

EHB503-24RD-* MXX 100 38 38,1 1 .50 52,0 2 .05 10,5 150 31 450 110 4 .33 94,8 28 1,19 0 .80 40-61 100

EHB503-28RD-* MXX 100 45 44,5 1 .75 58,5 2 .30 10,5 150 31 450 130 5 .12 94,8 28 1,36 0 .91 40-61 100

EHB503-32RD-* MXX 100 51 50,8 2 .00 66,0 2 .60 10,5 150 31 450 150 5 .91 94,8 28 1,66 1 .11 40-61 100

EHB503-40RD-* MXX 100 60 63,5 2 .50 78,5 3 .09 10,5 150 31 450 280 11 .02 94,8 28 2,08 1 .40 40-61 100

EHB503-48RD-* MXX 100 80 76,2 3 .00 93,0 3 .66 10,5 150 31 450 340 13 .39 94,8 28 2,68 1 .80 40-61 100

EHB503-64RD-* MXX 100 102 101,6 4 .00 118,5 4 .67 10,5 150 31 450 450 17 .72 94,8 28 3,54 2 .38 40-61 100

r


Food

and

Bev

erag

e –

Bev

erag

e Su

ctio

n &

Dis

char

ge


Food and BeverageBeverage Discharge

Softwall Potable Water DischargeEHF006



Construction:

Tube: SBR blend meets FDA & European requirements

Reinforcement: High-tensile synthetic textile

Cover: EPDM rubber


-30°C to +70°C (-22°F to +158°F)

Application:• For discharge of

potable water

Markets:• Food processing• Tank truck• Dairy processing• Milk processing



Part No.

r

Hose I.D. Hose O.D.Max Oper Pressure

Burst Pressure

Minimum Bend Radius Weight Length

mtr ft DN mm in mm in bar psi bar psi mm in kg/m lbs/ft mtr ft

EHF006-48- MXX 200 80 76,2 3 .00 93,0 3 .66 10,0 145 40,0 580 760 29 .92 3,24 2 .18 40-61 200

EHF006-64- MXX 200 102 101,6 4 .00 118,5 4 .67 10,0 145 40,0 580 1020 40 .16 4,02 2 .70 40-61 200

EHF006-80- MXX 200 130 127,0 5 .00 146,0 5 .75 8,0 115 32,0 460 1270 50 .00 5,25 3 .53 40-61 200

EHF006-96- MXX 200 150 152,4 6 .00 169,0 6 .65 8,0 115 32,0 460 1520 59 .84 5,83 3 .92 40-61 200


everage Discharge



CLEARFORCE™—RH285



Construction:

Tube: Clear PVC NSF-51 certified FDA approved material

Reinforcement: 2-spiral fiber

Cover: Clear PVC


-26°C to +66°C (-15°F to +150°F)

Application:• For food and beverage

dispensing• For spraying and conveying

fertilizer and pesticides

Markets:• Food processing• Agriculture• In-plant service

Type of Couplings:• “E” Series• 265 “P” Series• Barbed inserts


Part No. Hose I.D. Hose O.D.Max Operating

PressureBurst

Pressure Weight Length

mtr ft DN mm in mm in bar psi bar psi kg/m lbs/ft mtr ft

H28503- 300 5 4,8 0 .19 9,5 0 .37 17,2 250 70,0 1000 0,07 0 .05 300

H28504- 300 6 6,4 0 .25 11,3 0 .44 17,2 250 70,0 1000 0,09 0 .06 300

H28505- 300 8 7,9 0 .31 13,5 0 .53 17,2 250 70,0 1000 0,11 0 .08 300

H28506- 300 10 9,5 0 .38 15,1 0 .59 15,5 225 62,0 900 0,14 0 .09 300

H28508- 300 12 12,7 0 .50 19,1 0 .75 13,8 200 55,0 800 0,19 0 .13 300

H28510- 300 16 15,9 0 .62 22,2 0 .87 13,8 200 55,0 800 0,23 0 .15 300

H28512- 300 19 19,0 0 .75 26,2 1 .03 10,5 150 41,0 600 0,29 0 .20 300

H28516- 200 25 25,4 1 .00 33,3 1 .31 8,5 125 35,0 500 0,42 0 .28 200

H28520- 100 31 31,8 1 .25 42,9 1 .69 7,0 100 28,0 400 0,76 0 .51 100

H28524- 100 38 38,1 1 .50 49,2 1 .94 7,0 100 28,0 400 0,88 0 .60 100

H28532- 100 51 50,8 2 .00 63,5 2 .50 5,0 75 20,7 300 1,27 0 .85 100

Food

and

Bev

erag

e –

Bev

erag

e D

isch

arge



CLEARFORCE™—NRH160



Construction:

Tube: Clear PVC NSF-51 certified FDA approved material

Cover: Clear PVC


-10°C to +66°C (-15°F to +150°F)

Application:• For food and beverage

dispensing

Markets:• Food processing• In-plant service

Type of Couplings:• Barbed inserts



Pressure Length

mtr ft DN mm in mm in bar psi mtr ft

H160204- 100 3 3,2 0 .12 6,4 0 .25 4,5 65 100

H160305- 100 5 4,8 0 .19 7,9 0 .31 3,9 55 100

H160406- 100 6 6,5 0 .25 9,5 0 .38 3,9 55 100

H160408- 100 6 6,5 0 .25 12,7 0 .50 4,0 60 100

H160507- 100 8 7,9 0 .31 11,1 0 .44 3,5 50 100

H160608- 100 10 9,5 0 .38 12,7 0 .50 3,0 45 100

H160609- 100 10 9,5 0 .38 14,3 0 .56 3,4 50 100

H160610- 100 10 9,5 0 .38 15,9 0 .62 3,9 55 100

H160810- 100 12 12,7 0 .50 15,9 0 .62 2,0 30 100

H160811- 100 12 12,7 0 .50 17,3 0 .68 2,8 40 100

H160812- 100 12 12,7 0 .50 19,1 0 .75 3,0 45 100

H161013- 100 16 15,9 0 .62 20,6 0 .81 2,5 35 100

H161014- 100 16 15,9 0 .62 22,2 0 .87 2,8 40 100

H161216- 100 19 19,0 0 .75 25,4 1 .00 2,5 35 100

H161418- 100 22 22,2 0 .88 28,6 1 .13 2,0 30 100

H161620- 100 25 25,4 1 .00 31,8 1 .25 1,7 25 100

H162024- 100 31 31,8 1 .25 38,1 1 .50 1,3 20 100

H162430- 100 38 38,1 1 .50 47,6 1 .87 1,7 25 100

H162432- 100 38 38,1 1 .50 50,1 1 .97 2,5 35 100

H163240- 100 51 50,8 2 .00 63,5 2 .50 2,5 35 100


everage Discharge


Food and BeverageDry Bulk Discharge

Dry Bulk DischargeH0413



Construction:

Tube: Natural rubber

Reinforcement: High-tensile synthetic textile and anti-static copper wire

Cover: Natural/SBR blend rubber


-29°C to +71°C (-20°F to +160°F)

Application:• For discharge of bulk

abrasive material for food industry

Markets:• Food processing• Tank truck• Plastic industry

Type of Couplings:• Cam and groove



PressureBurst



H041364- 100 102 101,6 4 .00 121,9 4 .80 3,5 50 13,8 200 3,35 2 .25 100

H041364- 150 102 101,6 4 .00 121,9 4 .80 3,5 50 13,8 200 3,35 2 .25 150

Food

and

Bev

erag

e –

Dry

Bul

k D

isch

arge


Food and Beverage – Cleaning Service

Food and BeverageCleaning Service

Creamery/Packing WashdownH1066



Construction:

Tube: Nitrile

Reinforcement: 2-braid fiber

Cover: Pin-pricked vinyl nitrile


-40°C to +82°C (-40°F to +180°F)

Application:• For washdown of food

processing facilities and equipment

Not for conveying milk.

Markets:• Food processing• Meat packing and rendering• Chicken processing• Dairies• Canneries• Syrup manufacturing

Type of Couplings:• Barbed inserts• “U” series



PressureBurst



H106612-500R 500 19 19,0 0 .75 31,8 1 .25 13,8 200 55,0 800 0,65 0 .44 500


Food

and

Bev

erag

e –

Clea

ning

Ser

vice


WASHDOWN™ 1250H9673



Construction:

Tube: Nitrile

Reinforcement: 1- and 2-braid fiber



-40°C to +82°C (-40°F to +180°F)



Markets:• Food processing• Industry cleaning• Construction• Poultry

Type of Couplings:• “U” Series• Combination nipple



PressureBurst



H967306-350R 350R 10 9,5 0 .38 17,8 0 .70 86,0 1250 345 5000 0,25 0 .17 350

H967308-100 100 12 12,7 0 .50 21,7 0 .86 86,0 1250 345 5000 0,31 0 .21 100

H967308-350R 350R 12 12,7 0 .50 21,7 0 .86 86,0 1250 345 5000 0,31 0 .21 350

H967312-350R 350R 19 19,1 0 .75 29,7 1 .17 86,0 1250 345 5000 0 .49 0 .33 350


Food and Beverage – Cleaning Service


WASHDOWN™ 1000H9610



Construction:

Tube: Nitrile

Reinforcement: 1-braid fiber



-40°C to +82°C (-40°F to +180°F)



Markets:• Food processing• Industry cleaning• Construction• Poultry

Type of Couplings:• “U” Series



PressureBurst



H961006GY-350R 350R 10 9,5 0 .38 17,7 0 .70 70,0 1000 275 4000 0,35 0 .24 350

H961008GY-350R 350R 12 12,7 0 .50 20,6 0 .81 70,0 1000 275 4000 0,45 0 .30 350

H961008YW-350R 350R 12 12,7 0 .50 21,6 0 .85 70,0 1000 275 4000 0,48 0 .32 350

H961012GY-350R 350R 19 19,0 0 .75 29,4 1 .16 70,0 1000 275 4000 0,77 0 .52 350


Food

and

Bev

erag

e –

Clea

ning

Ser

vice


SUPRAFORCE™H1531



Construction:

Tube: Rubber modified thermoplastic

Reinforcement: 2-spiral fiber

Cover: Rubber modified thermoplastic


-12°C to +82°C (-10°F to +180°F)

Application:• For high pressure spray

or washdown

Markets:• Food processing• Industry cleaning• Construction

Type of Couplings:• Barbed inserts



PressureBurst



H153106-500R 500 10 9,5 0 .38 17,5 0 .69 28,0 400 110 1600 0,22 0 .15 500

H153108-500R 500 12 12,7 0 .50 19,8 0 .78 28,0 400 110 1600 0,25 0 .17 500

H153110-500R 500 16 15,9 0 .62 25,4 1 .00 28,0 400 110 1600 0,42 0 .28 500

H153112-500R 500 19 19,0 0 .75 28,6 1 .13 28,0 400 110 1600 0,48 0 .32 500

H153116-300R 300 25 25,4 1 .00 36,5 1 .44 20,7 300 83 1200 0,71 0 .48 300


Eaton Industrial Hose ReminderHose Selection

Selection of Hose

Selection of the proper Eaton Industrial hose for an appli-cation is essential to the proper operation and safe use of the hose ad related equipment . Inappropriate hose selection may result in hose leakage, bursting, or other failure which may cause bodily injury or property damage from spraying fluids or flying projectiles . To avoid serious bodily injury or property damage resulting form selection of the wrong hose, carefully review the information in this catalog . Some of the factors to consider on proper hose selection are known as STAMPED:

These factors and the supplemental information contained in this catalog should be considered in selecting the proper hose for your application . If you have any questions regarding the proper hose for your application, please contact Eaton for North America, Eaton Technical Support 1-888-258-0222 for global support contact your local Eaton Technical Representative .

S - Size, (I .D ., O .D . and length)

T - Temperature of material conveyed and environmental

A - Application, the conditions of use

M - Material being conveyed, type and concentration

P - Pressure to which the assembly will be exposed

E - Ends; style, type, orientation, attachment method, etc .

D - Delivery testing, quality, packaging and delivery requirements

Notes

Food and Beverage

Term

s an

d Co

nditi

ons

of S

ale

© 2013 EatonAll Rights ReservedPrinted in USADocument No. E-HOOV-MC003-E2

Eaton Industrial Hose1750 Hardeman LaneCleveland, TN 37312USATel: 1-800-833-3837FAX: 1-952-974-7513www.eaton.com/hydraulics

EatonHydraulics Group EuropeRoute de la Longeraie 71110 MorgesSwitzerlandTel: +41 (0) 21 811 4600Fax: +41 (0) 21 811 4601

Eaton Hydraulics Group Asia PacificEaton BuildingNo.7 Lane 280 Linhong Road Changning District, Shanghai200335 ChinaTel: (+86 21) 5200 0099Fax: (+86 21) 2230 7240

industrial hose 2016 product catalog...temperature range-25˚f to 180˚f (-32˚c to 82˚c) packaging...

Documents