industrialpartnership for esearch in interfacial aterials...
TRANSCRIPT
Industrial
Partnership for
Research in
Interfacial and
Materials
Engineering
IPRIME
1
Industrial Partnership for Research in Interfacial & Materials Engineering
IPRIME History
• CIE (Center for Interfacial Engineering) – Funded by NSF from 1988 to 1999
– Industrial outreach, 114 resident fellows, 393 PhDs
– Fostered culture of integrated research, education and industrial interaction
• Members encouraged continued collaboration
• IPRIME (Industrial Partnership for Research in Interfacial and Materials Engineering)– Legacy organization from CIE
2
Industrial Partnership for Research in Interfacial & Materials Engineering
• Highly Interdisciplinary (47 faculty in 9 departments)
– Biochemistry, Molecular Biology and Biophysics
– Biomedical Engineering
– Bioproducts and Biosystems Engineering
– Chemical Engineering and Materials Science
– Chemistry
– Electrical and Computer Engineering
– Mechanical Engineering
– Pharmaceutics
– Physics
• Research is Pre-Competitive and Non-Proprietary
• Focus on fundamental science that underlie industrial products and
processes
• 7 Interdisciplinary Research Programs
IndustryA University−Industry Partnership based
on Two-Way Knowledge Exchange
“Knowledge is one. Its division into subjects is a concession to human weakness.”- Halford Mackinder
3
University
Industrial Partnership for Research in Interfacial & Materials
Engineering
Industrial Partnership for Research in Interfacial & Materials Engineering
7 Research Programs
• Biocatalysis and Biotechnology (BB)
• Biomaterials and Pharmaceutical Materials (BPM)
• Coating Process Fundamentals (CPF)
• Electronic Materials and Devices (EMD)
• Flexible Electronics and Photovoltaics (FEP)
• Microstructured Polymers (MP)
• Nanostructural Materials and Processes (NMP)4
Industrial Partnership for Research in Interfacial & Materials Engineering
Mitsui
Zeon
Netherlands (1) DSM
Germany (2) BASF, Evonik
Members Across the Globe
Japan (3)
Europe
5
Industrial Partnership for Research in Interfacial & Materials Engineering
China (1)Wanhua ChemicalSaudi Arabia
Saudi Aramco
South Korea (1)SK Chemicals
IPRIME Member Companies
Industrial Partnership for Research in Interfacial & Materials Engineering
Industrial Support
Contributions over $1,400,000 per year from ~33 companies
• Sponsor Membership ($60,000 per year) - Participation in up to 4 research programs
- Opportunity to utilize Industrial Fellow Program
- Representative on the Policy and Planning Board (PPB)
• Affiliate Membership ($48,000 per year)- Focus on one 1 research program, no Industrial Fellow
• Small company option - $7,500 minimum or
- 0.03% of sales per year, up to $48,0007
Industrial Partnership for Research in Interfacial & Materials Engineering
Why IPRIME?
• Partnership
• Future employees
• Facilities
• Knowledge Transfer
8
Industrial Partnership for Research in Interfacial & Materials Engineering
Partnership
Companies• Scientific exchange with
academic sector
• Influence research
directions
• Leverage government
funding (NSF, NIH, DOE)
• Portal/referral to other U
resources/capabilities
• Industrial Fellows
Faculty & Students • Ready source of “hard
problems”
• Funding support
• Technology
implementation
• Fosters faculty
interactions
• Industrial Fellows9
Industrial Partnership for Research in Interfacial & Materials Engineering
Company Employee Research Topic Faculty
Boston Scientific Xue Zhen Surface Characterization of graphene Steve Koester
Donaldson Brad Hauser
Advanced Characterization of
Superhydrophobic Heterogeneous Materials Greg Haugstad
DSM
Thomas van
Kempen
Spreading and merging of droplets to make
nanoparticulate coatings Satish Kumar
Ecolab Derrick
Anderson
Synthesis and characterization of carbon
dots using starting materials relevant to solid
cleaning and sanitizing products
Christy Haynes
Mitsui
Ryohei
OgawaSynthesis of cross-linkable aliphatic polyester
elastomers derived from castor oil Marc Hillmyer
Zeon Corporation Hitoshi Oishi
Analysis of liquid crystal molecular
orientation mechanism on retardation films
by coating process Satish Kumar
Zeon Corporation
Kousuke
Isobe
Synthesis of new block polymers for
membrane applications by microstructured
polymer Marc Hillmyer
Industrial Fellows
Future Employees
Companies• Early access to PhD students
• Most graduates work at
IPRIME companies
• Early student access to
employers
• Learn industrial research
process and interactions
• Hone communication skills
• Resumes distributed
Annual Meeting Poster Session
Faculty & Students
11
Industrial Partnership for Research in Interfacial & Materials Engineering
Supporting Facilities
Companies• CharFac*
(training + analysis)
• Imaging Center
• Polymer Characterization Facility*
• Polymer Synthesis
• Coating Process and Visualization Lab
• Tissue Mechanics*
Faculty and Students• In-kind equipment contributions
• Industrial utilization of facilities
*Discount for IPRIME members12
Industrial Partnership for Research in Interfacial & Materials Engineering
❖ Hard & soft materials, liquids,
bio/medical, enviro/geo/archeo
❖ Training/mentoring/consultation
❖ Analytical services, methods
development, collaboration
❖ Workshops & short courses
❖ → EXPERTISE
U. of Minnesota Characterization Facility
www.charfac.umn.edu
Clientele: “Like a national lab”
Other pertinent facilities on campus:State-of-the-art light microscopy (superresolution, etc.): University Imaging Center (Nikon Ctr Excellence)Rheology/DSC/TGA, NMR, Mass spectrom., X-ray tomography/electron microprobe Micro-/Nano-fabrication, Bioprocessing (fermentation, etc.)
Recent additions
• >$20 million of equipment (replacement value)
❖ Electron microscopes: 5 TEM, 4 SEM/FIB; cryo, EDS/EELS/EBSD…
❖ X-ray scattering: 7 wide- & 1 small-angle; micro, T-dep., 2D detectors
❖ Surface analytical: 2 XPS, UPS, Auger, sputtering, microtensiometry
❖ Proximal probes: 3 ambient & 2 environmental AFMs; UHV/LT-STM,
stylus profilometer, 3 nanoindentors, pin-on-disk tribom., AFM-IR
❖ Chemical spectro/microscopy: confocal Raman, FTIR (ATR/DRIFTS)
❖ Thin film analysis: RBS w/PIXE/FReS, spectroscopic ellipsometry
• ~10 FTE scientific staff (permanent)
• ~500-600 end users/yr, ~100 external (incl. clients)
• ~140 faculty users/yr from ~35 UMN depts/units
• ~250 students/yr in curricular & short courses
• ~40-50 industrial users/clients per year
• ~15 external academic
institutions per year
XPS/UPS,
cluster beam
Dual-beam FIB/SEM
WAXS & SAXS
AFM-IR
X-ray Diffraction & Scattering (8)• Bruker AXS (Siemens) D5005 XRD
• Pananalytical X’pert Pro high-angular resolution XRD (reflectivity, in-plain diffr, rocking curves, reciprocal space maps)
• Bruker AXS micro-XRD (2D detector, 2-axis sample tilt)
• Bruker D8 Discover micro-XRD (2D detector, 2-axis sample tilt)
• Bruker D8 Advance XRD with temperature and humidity control
• Laue diffractometer (crystal orientation)
• Xenocs/SAXSLAB Ganesha SAXS/WAXS/GISAXS (coming soon)
Ion Beam Analysis (elemental composition, depth profiles)• Rutherford backscattering (RBS); FReS, PIXE/PIGE, NRA
• NEC 5.1 MeV accelerator, He+, He++ and H+ beams
• Goniometer, channeling : depth/element-specific crystallinity
Surface analytical (elemental, chemical, sputter-profiling)• Phi versaProbe III XPS/ESCA withUPS: monochromated, small
spot, angle resolved; cluster beam sputter profiling (just added)
• SSI XPS (monochromated)
• Auger spectroscopy (AES; scanning microscope, depth profiling)
• Micro contact angle system with high-speed camera (dynamic)
Vibrational spectroscopy (chemical, 3D imaging)• Thermo FTIR spectrometer (DTGS and MCT detectors), Transm.,
Refl., ATR, DRIFTS; FTIR microscope
• Witec confocal Raman spectrometer/microscope; full spectroscopic imaging in XY and XZ; 532-nm and 785-nm lasers with dedicated spectrometers; down to 30 cm-1 vibrations
Visible light based analysis &imaging (also see U Imaging Ctr)
• Woollam spectroscopic ellipsometer (film thickness and optical constant characterization over λ=200-1100 nm)
• Nikon light microscope - bright/dark field, polarization, phase, fluorescence, differential interference contrast (DIC)
Scanning & Transmission Electron Microscopes & FIB (11)• JEOL 6500 FE-SEM (BS, EDS, EBSD, cathodoluminescence)
• JEOL 6700 FE-SEM (high-resolution)
• Hitachi SU8220 FE-SEM (ThermoNoran EDS, high-res., cryo, BS/mix)
• Hitachi S-4700 FE-SEM (cryo, BS)
• FEI Helios NanoLab G4 dual-beam FIB/FE-SEM (just added)
• JEOL 1200 EX Bio-TEM (LaB6)
• FEI Tecnai G2 Spirit Bio-Twin (cryo/bio) (LaB6)
• FEI T12 TEM (LaB6 with EDS)
• FEI Tecnai G2 F30 FEG-TEM (EF-TEM, cryo/bio, 2-axis tilt for tomog.)
• FEI Tecnai G2 F30 FEG-TEM (EELS, EDS, STEM, HAADF)
• FEI Titan aberration-corrected FEG-TEM (EDX, EELS, STEM, HAADF)
• Two full suites of specimen prep tools (for SEM/TEM + AFM/Raman): hard and soft materials, biological; two cryo-microtomes
Proximal nanoprobes: AFM, nanoindentors & related (10)• Omicron ultrahigh vacuum STM/STS LT system (coming soon)
• Two Bruker Nanoscope V Multimode 8 SPMs (with PeakForce QNM, EFM, MFM, KPFM, FMM, fast force volume)
• Intermodulation Products add-on to Bruker SPMs (just added)
• Two Keysight 5500’s (closed loop scanners, current sensing, T/RH control, easy fluid cells, multifrequency); inverted light microscope
• WITec digital pulsed force mode add-on to Keysight 5500
• Anasys nanoTA2 + SThM add-on (heated tip) to Keysight 5500s.
• LabView / custom methods (setpoint ramping, FT shear modulation)
• Hysitron Triboindentor (mapping)
• Hysitron Picoindentor (in situ indentation, inside TEM)
• Keysight Nanoindentor XP (AC loading, storage/loss modulus)
• Custom-built micromechanical tester (IBM MMT)
• Tencor stylus profilometer (up to 14’’ wide, 2” thick samples)
CharFac instruments: data-generating systems (38)
Details at www.charfac.umn.eduNot listed: ~30 ancillaries (mainly specimen prep tools)
Chris Frethem SEM (cryo and bio/soft material emphasis)
Dr. Javier Garcia-
BarriocanalXRD, Small-angle X-Ray scattering, IBA, ellipsometry
Dr. Bob Hafner High-contrast and cryo TEM (bio, soft materials)
Dr. Greg Haugstad AFM, Ion beam analysis (IBA: RBS, PIXE, FReS & related)
Dr. Han Seung Lee SEM/TEM (cryo emphasis)
Dr. Bing Luo Confocal Raman/FTIR, XPS/Auger, micro-contact angle
Dr. Jason Myers FEG-TEM (HR/STEM/EDS/EELS), FIB
Dr. John Nelson (0.1 FTE) Nano/micro-mechanical, profilometry
Dr. Geoff Rojas Auger/XPS, STM/AFM, TEM
Dr. Nick Seaton Materials SEM, EDS/EBSD/cathodoluminescence
Dr. Seema Thakral (0.6
FTE)XRD, Small-angle X-Ray scattering
Dr. Wei Zhang (0.45 FTE) Cryo FEG-TEM, 3D reconstruction, tomography
Fang Zhou, MSBio EM specimen prep, (cryo)microtomy, TEM (bio, soft
material)
CharFac Technical Staff
13 professionals (11.15 FTE) manage 3-site capabilities.
Includes expert analytical services, education/training,
assistance/consultation, methods development, collaboration.
Contact Information at www.charfac.umn.edu/staff
Electron microscopy
X-ray scattering
Proximal probes
Vibrational spectroscopy
Surface Analytical
Thin film analysis
Analytical services (proprietary/commercial)
• Sample analysis by facility staff. (High commercial charge rates.)
• 1/3 discount on instrument time with IPRIME consortium membership.
Sponsored projects (full overhead-bearing; well-defined contract)
• Fund grad student, postdoc and/or staff scientist(s) under University principal
investigator. (Low internal charge rates.)
IPRIME consortium collaborations (no overhead, no contract or deliverables)
• Collaborate on publishable research with an IPRIME principal investigator and his/her
colleagues, no hands-on usage of CharFac. (Low internal charge rates.)
• Become an industrial fellow in collaboration with IPRIME principal investigator on
publishable research. May include hands-on usage at low internal charge rates.
Hands-on (proprietary/commercial)
• Obtain training for independent use of instruments (at high charge rates).
Methods development collaboration (no UMN overhead, no contract or deliverables)
• Fund CharFac technical staff member(s) on publishable methods research (academic
instrument rates, no hands-on). Modeled after IPRIME industrial fellow program.
Sought usage of the Characterization Facility by Industry
Knowledge Transfer
Annual Meeting*(May 26-28, 2020)
o Workshops
o Program Reviews
o Two-Night Poster Session
o Plenary Luncheon
o TAC & PPB Meetings
Mid-Year Workshops*o January 14, 2020
Website with members-only features*o Webcasts, Research Information, Exclusive Presentations
Short Courses (member discounts)
o Coating Process Fundamentals (May 19 -21, 2020)o Rheological Measurements (June 7-12, 2020)
Industrial Fellows (non-proprietary)
Sponsored Research (proprietary) Gifts (non-proprietary)
*Free to
members
17
Industrial Partnership for Research in Interfacial & Materials Engineering
o
18
IPRIME Member Events & ResourcesSampling of events shown. See full details at www.iprime.umn.edu
2018 Annual MeetingMay 29-31, 2018
Featuring presentations on:
• Droplet-Based Coating and Printing
• Polymer Nanocomposites: Preparation, Structure, &
Properties
• Bio Polymers and Materials
• Preparation & Processing of Biomedical & Pharmaceutical
Materials
• Advances in Flexible Electronics and OLED Displays
• Material Options for Transparent Conductive Oxides
• Characterization-focused Industrial Fellow Collaborative
Projects: Examples, Opportunities, & Challenges
Mid-Year Workshops
January 9-10, 2018• “3D Printing of Polymers: Materials and Processes” (CPF
& MP) Jan 9, 2018
• “Remote Imaging of Implanted Biomaterials and
Theranostics” (BPM) Jan 10, 2018
Short Courses
• Coating Process Fundamentals Short Course
(May 22- 24, 2018)
• Rheology Short Course
(August 12-17, 2018)
2019 Annual MeetingMay 28-30, 2019
Featuring presentations on:
• New Developments in Coating
• Sustainability of Polymers
• From Commodity to Value-Added Surfactants: Structure,
Phase Behavior, and Applications
• Synthetic Biology: An Overview of Industrial Potential.
• Wearable Technology -- Materials and Applications II
• Scalable Photonics and Metamaterials
• Ultra-Wide Gap Materials for High-Powered Electronics
Mid-Year Workshops
January 15-17, 2019• “Wearable Technology – Materials and Applications”
• “Characterization Methods for Surfaces, Interfaces and
Thin Films”
Short CoursesCoating Process Fundamentals Short Course
(May 21-23, 2019)
Rheology Short Course
(August, 2020)
www.iprime.umn.edu
19
Industrial Partnership for Research in Interfacial & Materials Engineering
Membership Benefits
• Access to latest research results
• Influence on research directions
• Access to world-class faculty expertise
• Early access to PhD students
• Career development for scientists/engineers
– Industrial Fellows program
• Reduced rates at supporting labs
• Networking with other IPRIME companies
Industrial Partnership for Research in Interfacial & Materials Engineering
7 Research Programs
• Biocatalysis and Biotechnology (BB)
• Biomaterials and Pharmaceutical Materials (BPM)
• Coating Process Fundamentals (CPF)
• ElectronicMaterials and Devices (EMD)
• Flexible Electronics and Photovoltaics (FEP)
• Microstructured Polymers (MP)
• Nanostructural Materials and Processes (NMP)21
Industrial Partnership for Research in Interfacial & Materials Engineering
Biocatalysis and Biotechnology (BB)
Investigator Department Expertise
Mikael Elias * Biochem Protein engineering and evolution, molecular modelling and
recognition, bioremediation and quorum quenching
strategies.
Mark Distefano Chem Organic and biochem., protein conjugates for therapeutic
and biotechnology applications.
Wei-Shou Hu CEMS Systems biotechnology, biochemical engineering, cell
culture bioprocessing, stem cell technology
Romas Kazlauskas Biochem Biocatalytic synthesis of chemical intermediates and
biofuels, enzyme modification for new reactions.
Ping Wang BBE Enzymology and biocatalysis, bioconversion and
biosynthesis, biomaterials and functional coatings,
bioelectrochemical processing, biosensors.
Lawrence Wackett Biochem Enzymes in biotechnology, immobilization technology,
bioremediation, computer prediction tools for biocatalysis
*Program Leader (Email: [email protected]; Phone: 612-626-1915)
Chemical and fuel bioprocessing; Biocatalyst engineering; Biotransformation and Bioremediation;
Enzyme evolution; Bio-based polymers and biocoatings; Pathway engineering; Synthetic biology;
Systems biotechnology; Cell culture bioprocessing
Biomedical and Pharmaceutical Materials (BPM)
• Biomaterials for drug delivery, medical device coatings, and tissue engineering
• Drug/medical device combinations, characterization of drug/materials interactions
• Cell-based fabrication of bioartificial tissues
• Novel tissue mechanical testing and analysis methods
Investigator Department Expertise
Ron Siegel* Phm1/BME2 hydrogels, drug delivery systems, microfabrication
Wei Shen BME bioactive materials
Calvin Sun Phm drug crystal and particle engineering
Raj Suryanarayanan Phm solid state properties of drugs, stability of
drug/biomaterial formulations
Bob Tranquillo BME/CEMS fabrication and characterization of bioartificial
cardiovascular replacement tissues
Chun Wang BME bio-molecular materials, polymer-based DNA and
drug delivery, protein-based tissue scaffolds
*Program Leader (Email:[email protected])
Affiliated Investigators: Marc Hillmyer, Theresa Reineke, Tom Hoye,
Pharmaceutics; Biomedical Engineering; Chemical Engineering and Materials Science, Chemistry
Coating Process Fundamentals
Investigator Department Expertise
Lorraine F. Francis* CEMS Solidification, stress development, microstructure, printing
Satish Kumar CEMS Transport processes, interfacial phenomena,microfluidics
Marcio S. Carvalho** Fluid mechanics, rheology, numerical methods
Alon V. McCormick CEMS Curing, thermodynamics & kinetics, NMR, stress development
C. Daniel Frisbie CEMS Printing processes, printed electronics
Xiang Cheng CEMS Colloids, polymers, rheology, visualization
Wieslaw Suszynski*** CEMS Coating process experiments, apparatus, flowvisualization
Associated Investigators: Cari S. Dutcher, Sungyon Lee
*Program Leader
**Pontifica Universidade Catolica, Rio de Janeiro
***Research Engineer and Coating Process and Visualization Laboratory Manager
Electronic Materials and Devices (EMD)
Investigator Department Expertise
Steven Koester* ECE Electronic devices, semiconductors
Bharat Jalan* CEMS Complex oxides, molecular beam epitaxy
Steve Campbell ECE Thin-film photovoltaics, 2D materials
Paul Crowell Physics Magnetism, transport, ultra-fast spectroscopy
Dan Frisbie CEMS Organic electronics, electrolyte gating
Chris Leighton CEMS Electronic/magnetic properties, film/layer growth
Collaborators
Andre Mkhoyan (CEMS), Xiaodong Xu (U. Washington), Ludwig Bartels (UCR), Chris Palmstrøm (UCSB),
Chris Kim (ECE)
* Co-Program Directors
Synthesis, structural and chemical characterization of materials relevant for a wide range of electronic,
optical and magnetic devices. Particular emphasis is placed on the understanding of the fundamentals of
electronic structure and transport in electronic and magnetic materials, in addition to the materials science,
physics and chemistry of the interfaces and nanostructures that play a vital role in device operation.
25
Investigator Department Expertise
Russell Holmes* CEMS Thin films, LEDs, solar cells
David Blank CHEM Ultrafast optical spectroscopy
Chris Douglas CHEM Molecular synthesis
Vivian Ferry CEMS Optical materials, plasmonics,
metamaterials, nanocrystals
C. Daniel Frisbie CEMS TFTs and printed electronics
Flexible Electronics and Photovoltaics (FEP)
Interested in the design of materials, device architectures, and processes
For the realization of flexible electronics and optoelectronics
based on organic and hybrid organic-inorganic materials
*Program Leader
26
Microstructured Polymers (MP)
Investigator Department Expertise
Chris Ellison * CEMS Composites, thin films, lithography fibers,
photopolymerization, & polymer processing
Frank S. Bates CEMS Thermodynamics, scattering, synthesis
Michelle Calabrese CEMS Rheology and processing, in situ scattering,
new techniques and analyses
Kevin Dorfman CEMS Modeling, confined polymers, DNA
Marc A. Hillmyer CHEM Polymer synthesis and characterization
(Director: Polymer Synthesis Facility)
Timothy P. Lodge CHEM/CEMS Polymer dynamics, solutions, scattering
Chris Macosko CEMS Rheology, processing
Mahesh Mahanthappa CEMS Polymer Science and Engineering
David C. Morse CEMS Theory and modeling
Theresa Reineke CHEM Biomedicine, Diagnostics, Targeted Delivery
Collaborators include:
Lorraine Francis (CEMS), Dan Frisbie (CEMS), Tom Hoye (CHEM), Chris Leighton (CEMS),
Ron Siegel (PHRM), Bill Tolman (CHEM)
Synthesis, characterization, dynamics, processing, properties, and theory
*Program leader
27
Investigator Dept Expertise
Alon McCormick* CEMS Reaction Engineering of Materials Synthesis;
Spectroscopy; Molecular Simulation
C. Daniel Frisbie CEMS Molecular Materials and Interfaces; Molecular Electronics
Wayne Gladfelter CHEM Materials Chemistry; Inorganic Chemistry; Scanning Probe
Microscopy
Greg Haugstad CHAR FAC AFM Scanning Probe Microscopy (Director,
Characterization Facility)
Christy Haynes CHEM Porous and plasmonic nanomaterials, nanoparticle toxicity
R. Lee Penn CEMS Environmental Solid State Chemistry
Andreas Stein CHEM Solid State Chemistry of Porous Materials
Joe Zasadzinski CEMS Molecular Fluids, Optical/Electron/Scanning Probe
Microscopy
* Program Leader
Nanostructural Materials & Processes (NMP)
Synthesis, phase behavior, structure, and performance of
surfactants and self-assembled molecular and colloid systems
28