iNETest Technologies India Pvt. Ltd.w w w . i n e t e s t . c o . i n

Te s t S t r a t e g y E x p e r t s ! !

YXLON – Germany Teradyne Inc. – USA

VI Technology – FranceTakaya Corp. – Japan

Aurotek Corporation – TaiwanJTAG Technologies – The Netherlands

PBT Roznov p R, s.r.o. – Czech RepublicData IO Corporation – USA

Specialty Coating Systems (SCS) – USA

Finetech – BerlinYJ Link Systems – Korea

PENN Engineering – USAJBC Soldering S.L.– Spain

Headquar tered in Germany, Hamburg, YXLON International was founded Star ted in 1960’s,Teradyne INC - USA is a leading manufacturer of In-circuit in 1998 and is the worldwide leading manufacturer & supplier of Industrial X- Tester worldwide, with its of f line & in Line In Circuit Tester and with few 100 ray Inspection systems & Industrial Computed Tomography (CT) systems. test points to 15,000 test points. Teradyne continues to deliver competitive

advantage to the world's leading electronics companies with its three major business units: Semiconductor Test, System Test, and Wireless Test.

ViTechnology® is a worldwide global supplier for the design, manufacture, and suppor t of a wide range of innovative Automated Optical Inspection (AOI) equipment and sof tware solutions for a multitude of applications. These applications include PCB assembly, incoming inspection and process control.

Established in 1980, Aurotek of fers a wide Variety of PCB De-Panelling Systems, In-Line, Dual Stage & Desktop Routers. Aurotek is One-Stop JTAG Technologies was formed in 1993, JTAG Technologies specializes in Solution Provider for PCB, SMT, LCD, optical, solar and semiconductor solving physical access problems involved in testing and in system equipment over three decades. programming printed circuit boards. This is done with technology based on

the boundary-scan technique: IEEE Standard 1149.1.

Specialty Coating Systems (SCS) is the world leader in conformal coatings for the Medical, Electronics, Automotive and Military industries. In addition to this, SCS also of fers industry-leading lines of liquid spray coating systems, spincoat systems, dipcoat systems and UV cure systems and Ionic contamination Tester.

Finetech founded in 1992 in Berlin, of fers a wide range of rework solutions . Finetech manufactures innovative, high accuracy equipment for leading edge bonding, micro assembly and rework challenges. Finetech products deliver the key benef its needed for reworking advanced devices – such as precise temperature and convection f low control, outstanding placement accuracy, extensive recipe libraries, large board handling, non-contact residual solder removal, and solder paste or f lux dispensing.

Penn engineering are the founders and the global leaders in self clinch fastening technology and have a wide spread dealer network in more than More than 80 years of specialized experience have placed JBC at the 30 countries serving industries from various segments like telecom , technological forefront of manufacturing, rework of soldering equipment computers, medical equipments, automot ive, machiner ies and and tools in the electronics. JBC has revolutionized the hand soldering equipments. process by providing controlled power and clean solder joints. JBC tools

can ef f iciently solder at 350º C, competitors tools can’t.

www.yxlon.com

www.teradyne.com

www.vitechnology.comwww.takaya.co.jp

www.robot.com.twwww.jtag.com

parylene

www.scscoatings.com

www.f inetech.de

www.pemnet.comwww.jbctools.com

The f irst Takaya f lying probe tester, introduced in 1986, was founded on a very simple principle---to provide a fast, easy to use, and dependable f ixtureless tester for the manufacturing world. Now in its 6th generation, the Takaya f lying probe tester continues to remain the #1 name and choice with the leading manufacturing companies around the world.

Established in 1992 is a leader in cleaning solutions with presence in more than 33 countries. PBT range of product includes Stencil Cleaning , PCBA Data I/O is the world’s leading provider of manual and automated device cleaning , Misprint Cleaning , Pallet Cleaning ,Par ts Cleaning catering to programming systems for Flash, Microcontroller and Logic devices. various segments such as Automotive , Aerospace , Electronic & Semiconductor .

ETSP Co. Ltd. provides wide range of Environmental Test Chambers which meet highly specialized customers request both standard & Custom designed chambers, viz. Temp. Humidity , Thermal Shock ,Walk-In, Salt Spray, A lt i tude, Rain, Dust, ESS, HAST, PCT, UV Chambers.

YJLink in Korea est ablished in 2003, Spec ia li zes in Board Handling/Automation Equipment, viz. Magazine Loader/Unloader, Vacuum Loader, PCB Cleaner, Link , Gate, Shuttle , Turning & Sliding conveyors, Inver ter, Buf fer/ NG Stacker, Wave Soldering IN/Out Feed conveyor, Manual Inser tion line.

www.dataio.comwww.pbt.cz

www.etsp.co.kr

www.yjlink.com

ETSP Co. Ltd. – Korea

Today's advanced electronics manufacturing processes pose tough challenge for failure analysis of components and boards. It is becoming increasingly challenging when gadgets are becoming smaller and are produced under large scale manufacturing in the state-of-the-ar t placement and assembling processes. All electronics systems are gradually becoming complex and more deeply embedded in our daily lives thereby the consequences of failure have become exponentially more serious. Therefore, it is impor tant to f ind and f ix failures before assembling the f inal products. The answer is to employ a comprehensive, multi-disciplinary approach test & measurement solution providing company i.e. iNETest Technologies India Pvt. Ltd.iNETest Technologies India Pvt. Ltd.(an ellipsiz group company) of fers a wide range of test & measurement solutions which are specif ically designed to detect latent complex defects at various levels of boards. The solutions of fered are to the specif ic needs and are highly f lexible to meet any line capacity of manufacturing, testing or assembling processes.iNETest Technologies is a right mix of resources, innovation, technology with agile service suppor t to satisfactorily serve more and more critical test & measurement needs.Over a period of a decade, iNETest Technologies has increased its footprint and grown phenomenally to expand the scope of operations to PAN India level and has become the leading supplier of T&M solutions in electronics ver tical. As a reliable solutions provider in industries like automobiles, LED, mobile phones, medical electronics and laboratory testing, iNEtest Technologies has proved its merit to lead the index. For more details you can visit our website -www.inetest.co.in

PARTNERS IN OUR PROGRESS

R

We of fer innovative and integrated solut ions to our customers and business par tners, enabling their goals optimally.

Vision

iNETest aspires to be the leading sales & s o l u t i o n s c h a n n e l t o t h e manufactur ing & service industry, providing diverse technical products & solutions.

CONTENTS

Mission

In Circuit Tester 01 ICT Fixture 16TestStation Multisite Inline/Of f line System ICT FixtureTestStation LH/LX/LX2 SystemTestStation Duo System Board DFT Tools 17Spectrum 8862 (TSSE) Board-Level Testability & Coverage Analysis Tools

Quality Management & Board Viewer ToolsX-Ray Of f line 03Y.Cougar Mobile Test Solutions 18Y. Cheetah Mobile Tester

X-Ray Inline 04 Environmental Chambers 19V810 Inline X-Ray Temperature & Humidity Chamber/Industrial Oven/

Thermal Shock Chamber/Walk In Chamber /Solar Module chamberAutomatic Optical Inspection 05 Salt Spray Tester/ HAST chamber/Altitude Chamber/ UV Chamber2K Spectro AOI5K Spectro AOI Electrodynamic Vibration Shakers 217K Dual lane Spectro AOI Signal Calc-Dynamic Signal Analyzer/Signal Star -Vibration

ControllersPCB Routing / Depanelling 06 Amplif iers/ShakersS168 – Series Dual Stage PCB Separator S-330 Inline Router SR/SL (Dual Stage) Board Handling & Automation System 22

Laser Marking Machine ,Magazine Loader/Unloader,PCB/ Stencil Cleaning 07 Buf fer Stacker AOI-NG Buf fer,Vacuum Loader Destacker Super Swash, Compaclean, Stencil Clean SIA PCB/Bare Board cleaner,,Inver ter (Ver tical Turn Conveyor),

Link Conveyor, Gate ConveyorBGA Rework Station 08FINEPLACER coreplus Test & Measurement Solutions 23FINEPLACER® micro rs LCR Meter, 3 In 1 Transformer Test System

Hi Pot Tester , Impedance Analyser , DC Bias SourceConformal Coating Systems 09 Cable Harness TesterPrecisioncoat –Conformal coating System Ionic Contamination Testers Soldering & Desoldering Stations 24PDS 2060 - Parylene Deposition System

Top 10 reasons to Buy JBC PDS 2010 – labcoter Rework StationSpin Coating System Single Stations (Soldering ,De-Soldering, Micro- tweezers) Nano Station

Flying Probe Tester 11APT – 820S

Dry Cabinets 25APT – 9411Dry Cabinets

IC Programming Solutions 12 Non – Contact Video Measurement Systems 26Socket Based Programmers Flash CNC 300 /View Pinnacle/ Itaca Flex Guage

Boundary Scan Testing Solutions 13Fasteners 27JTAG Sof tware & Hardware ToolsSelf Clinching Fastener Solutions & PEMSERTER

Functional Test Solutions 15Test Benches & Test Tools

www.teradyne.com

In-Circuit Tester (ICT)

Star ted in 1960's, Teradyne introduced their f irst integrated circuit tester (J259) in 1966. It was the f irst tester to use a minicomputer to control a series of test steps, and it launched the automatic test equipment (ATE) industry. Today Teradyne continues to deliver competitive advantage to the world's leading electronics companies with its three major business units: Semiconductor Test, System Test, and Wireless Test.

Easily expand to deliver full range of MDA, ICT, and Functional system level test

Basic SCAN & Scan Pathf inder boundary scan tool suite for 1149.1 & .6 Standards

Powered Framescan for Vectorless testing Deep Serial Memory for f lexible f lash programming High fault coverage Safe Test Protection Technology for low voltage devices. Parallel Digital Contact Testing Scalable per formance and test capabilities Multi-Function Application Board

TestStation: Fastest In-Circuit Test Plat form:

TestStation Architecture - Advantages & Features:

TestStation in-circuit test systems provide full structural and functional coverage for a wide range of manufacturing, component, process, and per formance defects for high-per formance analog, digital, and mixed-signal devices used on modern PCBs.TestStation models can be conf igured specif ically for the following end-product testing: High-Reliability Products – Automotive and Industrial applications that require extreme fault detection capability, and par ts per-billion

defect rates for the end-consumer High-Complexity Products – Network, Computing, and Communications applications tests that incorporate large numbers ofdevices and

require capability beyond 15,000 test points High-Volume Products – Consumer and Wireless applications that require extremely low cost of test and no-touch manufacturing solutions

TestStation is a scalable design that allows users to easily conf igure size, pin count, instrumentation, automation options, and other test features to match your specif ic test needs and satisfy throughput, and budget requirements.

Suppor ts up to 5 card slots per site Resource-optimized multi-site system design Designed to easily integrate within the TestStation Automated Inline

Handler or other industry-leading automation equipment suppliers Multi-Site parallel test capability for the fastest inline production speeds Conf igurable with analog only, pure pin, hybrid, or high-density pin cards Pin counts up to 2560 for single site conf igurations or 5120 for dual site

conf igurations

PXI Instrument for Functional test expansion Dynamic Programming Extension Conf igurable with analog only, pure pin, hybrid, or high-density

pin cards Design-to-Build (D2B) sof tware TestStation Development Pro Sof tware User power supplies System Frequency/Time Measurement (SFTM) Framescan FX Vectorless Test High per formance UltraPin II Digital Driver and Sensors Pin

cards Independent Clock Drive, Clock Sense, and Trigger (CST)

TestStation Multisite - Of f line & In-Line System:

TestStation Multisite Of f line Conf igurationfor Manual operation

TestStation Multi-Site Inline operation

1

TestStation Multisite Model 52

w w w. i n e t e s t . c o . i n

www.teradyne.com

Advantages: Twice the throughput of traditional in-circuit test systems Lower capital equipment, f ixture, and operational costs Requires less manufacturing f loor space Single module operation for f lexibility and compatibility Award-winning SafeTest protection technologies High Per formance Digital Vector Testing Automated Test Quality Measurement and Debug Sof tware

Features and Advantages Suppor ts up to 30 pin card slots for LX/ LX2 Conf igurable with analog only, pure pin, hybrid, and high-

density pin cards Comes equipped with built-in features for testing large,

complex, and heavily-integrated PCBs. LX/LX2 Pin count ranges up to 256 to 15,360 pins Single f ixture required for large PCB's > 8000 nodes Eliminates requiring split f ixtures for complex PCBA – The

single f ixture solution for large PCB's >5000 test points

Features and Advantages Economical, small footprint, feature scalable system Satisf ies low and high pin count applications Conf igurable with analog only, pure pin, hybrid, and high-

density pin cards Suppor ts up to 16 pin card slots for LH LH suppor ts Pin counts to 4,096 pins

Features and Advantages SPECTRUM 8862 (TSSE) provide 2560 all real channels (Non-

multiplexed – driver/ receiver behind each pin) High Accuracy PRISM DSP bases Analog measurement

Instruments Functional System upgrade option with internal VXI instrument Standard shor t and open testing Digital Vector testing Fully Synchronized testing of mixed-signal devices such as

ADC, DAC, CODECs Vectorless open test using MultiScan VICTORY Bscan testing Inline device programming for programming Flash, EEPRO,

FPGA etc using CC3 Lightening Channel card

TestStation LH features SafeTestprotection technology

TestStation LX/LX2 largest pin countin-circuit test system

Specturm 8862 (TSSE)

2

TestStation LH TestStation LX/LX2

TestStation Duo is a true concurrent test systemwith independent test modules

TestStation Duo

Spectrum 8862 provides full per formance for use in Automotive,Industrial and Defense & Aerospace system level test.

www.yxlon.com

YXLON International a company of COMET Group is worldwide leading manufacturing and supplier of Industrial X-ray Systems and Industrial Computed Tomography ( CT ) systems for non destructive testing of materials ( NDT). YXLON of fers Application and Testing services with customer suppor t world wide .

Detail detectability <1 µm 25 – 160 kV, 0,01 – 1 mA, 10 W Target power; 64 Watt Tube power Max. Target Power : 15W (Optional) Standard 5 axis manipulation system Optional 8 axis system True-X-ray Intensity Control (TXI) for steady long-term X-ray intensity High

resolution digital f lat panel detector “Panel 1308 High Speed” +/- 70° oblique viewing by tilting the detector, 140° in tilting total Geometric Magnif ication 2,000X Total Magnif ication 17,500 X Frame Rate: 10 FPS,30 FPS & 60FPS Max. sample size: 440 mm x 550 mm (17” x 21”) Max. inspection area: 310 mm x 310 mm (12” x 12”) Sof tware modules available for automatic inspection of BGAs and

die-attach Micro 3D Slice ( Optional)

X-ray Inspection System

Detail detectability < 500 nm & < 350 nm 25 – 160 kV, 0,01 – 1 mA, 10 W Target power; 64 Watt

Tube power Max. Target Power : 15W(Optional) Standard 5 axis manipulation system Optional 8 axis system True-X-ray Intensity Control (TXI) for steady long-term

X-ray intensity High resolution digital f lat panel detector “Panel 1308 High Speed”

+/- 70° oblique viewing by tilting the detector, 140° in tilting total

Geometric Magnif ication 2,000X & 3,000 X Total Magnif ication 17,500X & 25,500X Frame Rate : 30 FPS & 60 FPS Max. sample size: 800 mm x 500 mm (31” x 19”) Max. inspection area: 460 mm x 410 mm (18” x 16”) Sof tware modules available for automatic inspection of

BGAs and die-attach Micro 3D Slice ( Optional)

Y. Cougar

Y. Cheetah

Image with TXI Image without TXI

Out Put

In Put

X-raytube

3

Technology with Passion

True X-ray Intensity Control

w w w. i n e t e s t . c o . i n

Vitrox Corporation Designs & manufactures World Best Test Coverage & Fastest AXI SystemV810 S2 Per forms 3D In-Line Automated X-ray Inspection on double-sided panels with high defect coverage, high inspection speed, high accuracy and low false call rate

X-Ray (Inline)

V810 S2 IN- Line X-ray : Key Features

4

www.vitrox.com

Hardware

Scan Path Optimization

Real Time PSH

V810 SII includes a 64-bit main controller with 128 GB of memory. This new hardware and system architecture changes to optimize it reduce test times signif icantly as compared with V810 SI.

Scan path generation has been updated to reduce unnecessary re-scans, and avoid scanning sections of the panel that are not tested. This feature results in an additional test time reduction that varies with recipe.

The Predictive Slice Heights (PSH) no longer requires a rescan of the entire panel, and so, test time increase is much reduced as compared to V810 SI.

Inspection Speed (cm^2/second)

5DX X6000 V810, SI V810, SII

16.45 25.8 38 51.6

PSP Sur face Mapping

Voiding Support for large Thermal Pads

Phase shif t prof ilometry (PSP2) provides an alternative method for slice height setup. This method enables customers with 100% PTH, extremely warped panels, and other very challenging assembly conf igurations to achieve the correct slice height.

Improvements to the voiding algorithm to suppor t void detection for odd-shaped pads have been included in Series 2.

PoP Support

Crystal Technology

Suppor t for 3-layer PoP inspection is also added to V810 Series II. Users can add “User Def ined Slices” and modify focus regions in order to achieve 3-slice inspection on up to 3-layers of PoP packages.

V810 SII utilizes point spread function compensation to maximize the clarity on slice images. Crystal Technology is applied to 2.5D images in order to make them more clear and crisp for the repair operator to review.

Dynamic Range OptimizationThis new image acquisi t ion set t ing ut ilizes non-linear reconstruction techniques to maximize information from each projection. This feature is needed in situations with extreme shading such as thermal pads and GbX connector.

For post print, pre ref low, mixed mode or post ref low applications. 100% inspection: presence, absence, polarity and placement accuracy as well as OCV

and solder joints with Prof iler® tool. Jedec component library powered with Vectoral Imaging technology inspection tools. Real-time Statistical Process Control (SPC) capability. Automatic conveyor width adjustment for boards up to 21" x 24" for 5K 8 Megapixel CCD Color Camera Lighting system : Axial and Peripheral LED lighting Sub Pixel Resolution of 4.75µm Excellent accuracy with GR&R (± 50µm) < 5% Of f line Repair Station Sof tware

For post print , pre ref low , mixed mode or post ref low applications 100 % inspection : presence , absence , polarity and placement accuracy as well as OCV

and solder joints with Prof iler Tool Jedec component library powered with Vectoral Imaging technology inspections tools. Real Time Statistical Process Control ( SPC ) capability . Automatic Conveyor Width Adjustment for boards up to 2 x [ 21” x 11” ] 8 Megapixel CCD Color Camera Lighting System : Axial and Peripheral LED lighting Sub Pixel Resolution of 4.75 um Excellent accuracy with GR & R ( ± 50um ) < 5 % Of f line Repair Station Sof tware

Dual Lane AOI for Large Boards

Fast and Compact system with small footprint for post print, pre ref low, mixed mode or post ref low applications.

100% inspection: presence, absence, polarity and placement accuracy as well as OCV and solder joints with Prof iler® tool.

Jedec component library powered with Vectoral Imaging technology inspection tools.

Real-time Statistical Process Control (SPC) capability. Max board Dimensions :: 355.6 [14”] x 355.6 [14”] 8 Megapixel CCD Color Camera Lighting system : Axial and Peripheral LED lighting Sub Pixel Resolution of 4.75µm Excellent accuracy with GR&R (± 50µm) < 5% Of f line Repair Station Sof tware

Compact and af fordable solution

2K2K SPECTRO

Large Board AOI Solutions

5K5K

5

7K7K SPECTRO

SPECTRO

www.vitechnology.com

Automated Optical Inspection System

Vi TECHNOLOGY was founded in 1993 at the hear t of the French Silicon Valley in Grenoble. Vi Technology is a worldwide global supplier for the design, manufacture and suppor t of a wide range of innovative Automated Optical Inspection ( AOI) equipment for PCB assembly applications.

w w w. i n e t e s t . c o . i n

Loading and unloading simultaneously to limit the idle time

Available in linear and circular cutting todiminish restrictions of PCB design

Fr iendly man machine inter face to minimize the time of programming

Vacuum cleaner with auto power on/of f function to save power

Features Fully loading / Unloading Automatic processing in line machine High Speed Precision Touch screen Man machine Inter face High C/P Values Safety Door Designs assures operator's safety and provides

dust collection ef f iciency

Standard Specifications

Programme Storage HDD

Liner, L-Shape, Arc, U-Shape, Circular

USB

550Kg (CE) 670Kg. (SA)

Features for Dual Stage Routers

Ø 1mm – Ø 2mm (option over Ø 2mm )

1168 x 1480 x 1727mm (CE)

Max. 2 sections

100mm/sec

Two-Slide PCB Separator

- S168S Series - S330 IN-LINE SR/SLã ãNew In – Line PCB Separator

3Phase AC 220 V, +/- 5%, 50/60 Hz, 4kw, 15A (SA)

Standard Specifications

6

±0.02mm

X:330mm, Y:330mm, Z:60mm(CE)

3Phase AC 220V, +/- 5%, 50/60 Hz, 3kw,11A(CE)

X,Y :1000mm/sec and Z:750mm/sec

www.robot.com.tw

Dimensions (W) 1994 x (D) 1101.5 x (H) 2271 mm Routing Bit diameter Ø 0.8 mm – Ø 2mm (option over Ø 2mm )Precision of Positioning ± 0.01 mm Precision of Cutting ± 0.08 mmNumber of axes 7 axes ( X , YL , YR , Z , Carry , P/P , Conveyor )Working area X : 330 mm , Y : 330 mm , Z : 60 mmDriving Speed ( Max ) X , YL,YR : 1000mm/sec , Z : 750 mm/sec Cutting Speed ( Max) X,Y,Z : 100 mm / sec Spindle High Speed Variable Frequency motor 250W

( Max.58,000 rpm)Motor of Axes 7 axes ( 200W AC Servo Motor)Program Storage HDDCutting ability Linear , L – shape , Arc , U – shape , Circular Route planning Direct coordinate input or manual guiding with

10X CCD camera Routing bit sectioning Max. 2 sections Program back up USBPCB Loading / Unloading Automatic Conveyor Load Capacity Max. 2 kg Power Supply 3 Phase AC 220 V ± 5 %, 50 Hz/ 60 Hz , 2.5 KwWeight approx. 660 Kg Air 0.5 MPa

1000

PCB De-paneling System

Aurotek Corporation was founded in 1980 , Taiwan. Aurotek of fers a wide Variety of PCB De-Paneling systems like In Line – Dual Stage and Single Stage Systems .Aurotek is one stop solution provider for PCB Routing Solutions in Segments Automotive, EMS, LED, Telecom , over the decades .

SUPER SWASH DIRECT SPRAY AGAINST SURFACE TECHNOLOGY

APPLICATION Universal cleaning solution (PCBA, misprint, stencil in one system) Designed to clean dif f icult Hi-density PCBA, with low standof f components Cleaning before wire bonding High throughput & low process cost stencil cleaning Excellent PUMP PRINT® stencil cleaning

UNIQUE FEATURES 4 step process - each split to 5 substeps Easy process optimization due to glass door Ef f icient air knife for drip-of f and fast drying DI water reclaim plant is integrated Optional selective single-side cleaning Easy maintenance Solder pallet cleaning 3 years warranty (on request)

APPLICATION High capacity & low process cost PCBA cleaning Solder pallet cleaning

UNIQUE FEATURES Fixed nozzle system Basket oscillation Uniform covering of cleaned area All processes totally separated Closed DI water loops available 4 step process - each split ted to 5 substeps Easy maintenance 3 years warranty (on request)

STENCIL CLEAN SIAAUTOMATIC CLEANING SYSTEM FOR STENCILS AND PCB

Stencil and PCBA cleaning solutions

COMPACLEAN HIGH PRESSURE/ HIGH VOLUME CLEANING SYSTEM

www.pbt.cz

7

PBT Roznov p.R ., s.r.o was founded in 1992 , Czhech Republic is a leader in cleaning solutions. PBT of fers products includes Stencil Cleaning , PCBA cleaning , Misprint Cleaning , Pallet Cleaning , Par ts Cleaning catering to various industries such as Automotive , Aerospace , Electronics and Semiconductor.

APPLICATION Price-ef fective & reliable stencil cleaning Very suitable also for PUMP PRINT® stencil Ef fective for PCBA cleaning Very competitive price/per formance level

UNIQUE FEATURES Double motoric driven manifold with liquid and air knife system to

ensure direct ef fect Synchronous spraying and drying from both sides This prevents stencil from damaging Rinsing by cleaner, water or DI water Controlled drag-out compensation Wide choice of options Heating in cleaning medium Anticollision system Easy setting & operation Easy maintenance

w w w. i n e t e s t . c o . i n

Finetech is a 23 year old company founded in Berlin Germany. Finetech manufactures innovative, high-accuracy equipment for leading micro assembly and rework challenges. The FINEPLACER® systems are designed to be modular for maximum process f lexibility and come in manual, semi-automatic or automatic conf igurations.

The FINEPLACER® coreplus is an all-round hot air rework station for electronic components and assemblies. The complete rework cycle, including desoldering and soldering the component, residual solder removal and reballing, can be per formed on the same compact rework system. The spectrum of compatible sur face-mount devices ranges from very small (01005) to large components (BGA).

BGA Rework System

Highlights Components from 0.125 mm x 0.125 mm to 90 mm x 90 mm JEDEC/IPC conform thermal management with top and

bottom heating systems Automated pick-up and touch-down with force measuring Automated processes Process traceability with Smartdent Intuitive user experience with SmartControl Compact machine design

The FINEPLACER® micro rs is an enhanced hot air rework station for assembly and rework of all standard types of SMD components. A high level of process modularity allows all rework process steps within one system. The system is at home in production environments, R&D, process development and prototyping.

Features Automated soldering processes Overlay vision alignment system (VAS) with f ixed beam split ter Modular design Integrated Process Management (IPM) Real time process observation camera Adaptive process library Process transfer from system to system

ApplicationSoldering of: BGA, µBGA/CSP, QFN, DFN, PoP, QFP, PGA, SON , Small passives down to 0201, RF shields, RF frames, Connectors, sockets ,Sub assemblies, daughter boards, Flipchip (C4),(PiP) Pin in Paste, (THR) Through Hole Ref low and Single ball rework

www.finetech.de

8

FINEPLACER coreplus

FINEPLACER micro rs

9

www.scscoatings.com

The Global Leader in Specialized Coating Solutions

Specialty Coating System

Specialty Coating Systems is the global leader in delivering innovative coating solutions for advanced technologies. For more than three decades, customers have turned to SCS for the planning, development, engineering and application of thin-f ilm Parylene polymer coatings to their critical components. In addition to coating services, SCS also designs and manufactures industry-leading coating, curing and testing equipment. Being an exclusive distributor of SCS iNETest is very glad to introduce most , in India.Competitive Coating Solution

SCS Ionograph SMD V & BT SeriesSCS Ionographs® are designed for fast and accurate ionic contamination cleanliness testing. Each module uses an ultra-pure alcohol/water extraction media and a “dynamic method” to test product samples quickly and non-destructively. The family of test equipment of fers a full range of capacities and controls to f it the needs of any lab or manufacturer. For those per forming ionic contamination testing using “static test” methodology, the SCS Omegameter is the industry standard and provides ef fective and practical quality assurance for commercial cleanliness as well as accurate, repeatable and rapid results.

The SCS Precisioncoat spray and dispense system precisely applies 100% solids, solvent-based and water-based coatings, such as photo-resists, acrylics, adhesives, solder mask and anti-microbial coatings, to vir tually any sur face or substrate, with maximum accuracy. The Precisioncoat's standard conf iguration applies coatings with a three-axes system with an accuracy of 0.001 inches.Four th and f if th axes can be added for tilt and rotate functionality. The Precisioncoat is controlled by proprietary sof tware on a operating system and features convenient of f line Windows® The optional four th and f if th axes of fer tilt and rotation programming and f ile backup. for spray and dispense application. Optional features, including programmable tilt and rotate, f iducial recognition, needle calibration and barcode reader capability, are available to maximize ef f iciency and meet any production requirement. The System is SMEMA Compatible & has safety interlocks for Spray booth door & Exhaust. Common coating applications include:

Circuit Board assemblies Semiconductors Fuel cells Gasketing MEMS Wafers Photovoltaic arrays

SCS Precisioncoat (ConformalCoating Systems)

Ionic Contamination Tester

w w w. i n e t e s t . c o . i n10

www.scscoatings.com

The SCS G3 Spincoat series sets the standard in operating precision and programming f lexibility, with a high level of rotation accuracy and repeatability, along with precise acceleration and deceleration control. Programmable spincoat models have an integrated dispense arm and exhaust adapter, and are equipped to control solenoid operation of an optional dispensing unit.

For Parylene laboratory research, applications development and testing, the SCS Labcoter 2 Parylene Deposition System (PDS 2010) per forms reliable and repeatable application of SCS Parylene conformal coatings. The por table Labcoter 2 applies Parylene coatings. The por table Labcoter 2 applies Parylene coatings to components such as circuit boards, sensors, wafers, medical devices, MEMS and elastomeric components for research, development and repairs.

SCS PDS 2060 Parylene Deposite System

Spin Coater Series G3

SCS Parylene deposition systems are designed for accurate, precise and repeatable conformal coating production with high throughput and simple operation.

2060 Parylene deposition system features a Windows® XP- based computer control system that enables users to conf igure operating parameters as well as store and display system data. Selectable temperature and pressure data points are recorded for production monitoring, and real-time graphs are displayed during the coating process. Once operating parameters are programmed, the units can operate with minimal supervision. Additionally, all SCS Parylene deposition systems feature closed-loop monomer pressure control to ensure precise deposition of the polymer f ilm.

The Parylene Deposition Process

Benef its Of SCS Parylene Coating

Parylene Applications

Parylene coatings are applied at ambient temperatures with deposition equipment that enables control of both coating rate and ultimate thickness. Polymer deposition takes place at the molecular level as a powdered chemical is vaporized under vacuum and heated to form a dimeric gas, then pyrolized to cleave the dimer into its monomeric form, and f inally deposited as a transparent polymer f ilm. Coating thicknesses from 0.10 ìm to 76 ìm can be applied in

a single operation. No catalysts or solvents are used in the deposition process.

Chemical Barrier Moisture Barrier Dielectric Barrier Complete Encapsulation Pinhole/Defect Free Extremely Thin Biologically Iner t Environmentally Friendly

1. Electronics: PCB, Ferrite, cores, Electronic Package such as MEMs, Labs on Chips, Electrowetting Lenses, Metering applications.

2. Automotive: for Protection of Critical automotive sensors, PCBs.

3. Military & Aerospace Applications & Equipments: To protect against dust, sand, moisture, Chemical & Biological elements.

4. Medical: Implantable Medical Devices such as Cochelar implants, pacemaker & their components.Labcoter 2 Parylene Deposition System (PDS 2010)

Flying Probe Tester

The APT-820S is a f lying probe test system for detection of manufacturing defects on small and medium-sized printed circuit boards designated for today's cutting edge products. Even with just 2 independently moving probes, the tester can achieve a high-speed inspection similar to other testers with 3 or more moving probes and has a marked ability to detect faulty placement of SMT components and SHORT/OPEN failure reliably. In addition, the tester is cost ef fective and is highly-miniaturized to be placed in tight spaces. The tester is ideally suited for low volume production, high board mix prototype applications, low-value-added products as well as process checking for nominal value following the pick and place machines.

Designed by TAKAYA, the world leader in f lying-probe technology, the APT-820S is reliable, versatile, precise and fast!

It is your best choice for cost-cutting measure and quality improvement in your assembly line.

The APT-9411 series is a f lying probe test system for detection of manufacturing defects on printed circuit boards using 4 high speed in-dependently moving probes, thus removing the requirement for a conventional bed-of-nails f ixture. Beside of that the equipments of fers: Function tests Digital tests Programmable power supplies Barcode recognition with camera Advanced vision test system Integration of external measurement equipment Gain measurements In-line compatibility (SMEMA) Open pin checker Flash/EEPROM programming Boundary Scan Full compatibility of all APT test programs Power on, etc.

APT-820S Flying Probe Test System APT-9411 Flying Probe Test System

www.takaya.co.jp

11

Takaya Corporation first introduced Flying Probe Tester in 1986. Takaya founded on a very simple principle to provide fast , easy to use and dependable fixtureless tester for the manufacturing world. Now in its 6th generation, the Takaya flying probe tester continues to remain number one name and choice with the leading manufacturing companies around the world

w w w. i n e t e s t . c o . i n

Device Programming Solutions for Global Market

Data I/O is the world's leading provider of manual and automated device programming systems for Flash, Microcontroller and Logic devices. Data I/O with headquar ters in Redmond, Washington and of f ices located in Shanghai, China and Munich, Germany, is the only true global programming solutions provider of fering local service and engineering suppor t 24/7.

12

The FlashPAK III is the world's most trusted manual desktop gang programmer

FlashPAK III™ , is a 4-site programmer Device Suppor t for Flash memories, Microcontrollers, and

Flash-based Logic devices The FlashPAK III™ Networked Programming System suppor ts

the latest high-density Flash memory, NAND/NOR, eMMC, Managed NAND Flash, Microcontroller and EEPROM devices at maximum programming speeds and highest quality per device.

FlashPAK III is capable of reading and writing to devices at speeds greater than 10 MBytes/second.

FlashPak III can be controlled through the network as well as operates in Standalone mode.

Unique actuating bar opens sockets for easy inser tion & removal of devices.

Reduces par ts damage and socket wear, Reduces operator fatigue, Improves overall throughput.

PSV Series is most robust and reliable of f line automated programming system.

Up to 2000 devices/hour with tray, tape and tube conf igurations Trusted FlashCOREIII programming engine Data I/O's per fected pick and place head Data I/O's proven robotics handling and system management

sof tware Integrated vision system Genuine Data I/O Adapters for low noise & high yield Data I/O of fers the most options for socket technology to deliver

the lowest cost-per-programmed-par t at various volumes.

RoadRunner3, In Line Programming System.

The world's only just-in-time inline programming The RoadRunner family streamlines the manufacturing process,

reduces cost and minimizes operator errors for a lean manufacturing process.

The RoadRunner slides into slots on the SMT pick-and-place machine. A four-probe operation takes blank devices from tape input to place in sockets for programming. Af ter programming a conveyor delivers verif ied good devices to the SMT machine's pick-point for just-in-time placement on the circuit board.

Conf igurable and Versatile: The RoadRunner family suppor ts most major SMT machines.

www.dataio.com

www.jtag.com

13

Boundary-scan solves circuit access problems that arise from the use of advanced IC packages, such as ball-grid arrays (BGAs). The technique, based on the indust r y-standard IEEE 1149.1 specif ication, enables rapid precise testing and high-speed in- system programming (ISP) of densely-packed printed circuit boards.Boundary-scan's ef fectiveness is proven in thousands of applications across every segment of the electronics industry.

The power-full benef its Shor ter time-to-market Reduced capital investment and operating cost Faster, automated generation of test vectors and ISP f iles Easier troubleshooting of structural faults Simpler f low for PLD and f lash programming

Boundary-scan test and programming applications are only as dependable as the hardware they run on. JTAG Technologies has the industry's most reliable IEEE 1149.x controllers, specif ically designed by us for high throughput and the best signal integrity. High-speed DataBlaster controllers are available in all of the popular formats (PCI, PCIe, PXI, USB, Ethernet, Firewire) and are per formance-scalable. If economy is a priority, the Explorer controller with a USB inter face is the ideal choice.

Rugged equipment, reliable operationHardware

Implementing JTAG Technologies boundary-scan tools in your OEM or CM production facility is straight- forward. The wide range of run-time conf igurations allows you to implement the test strategy that best meets your needs - stand-alone boundary-scan or integrated with an existing in-circuit, f lying probe, or functional test system. There are solutions for Aerof lex, Agilent (UNIX and Windows), Digital Test, Genrad, National Instruments (LabVIEW, LabWindows and TestStand), Seica, SPEA, Takaya, Teradyne and others. Whatever your choice, the result is simplif ied logistics, streamlined product f low, and reduced operator interaction.

Production Seamless run-time integration:

Debugging boards too crowded for traditional probing just got a lot easier. Best of all, you can get star ted absolutely free of charge with JTAG Live's Buzz module (pat. pending). With Buzz, you can quickly drive, sense and sample pins and simple clusters. Two other modules, Clip and Script, available to order, measure multiple signals and more complex clusters. JTAG Live uses the boundary-scan resources found on today's complex digital circuit boards. There is no need for a netlist, just the devices' BSDLs, to give you access to all of the I/Os for driving and sensing.

JTAG Live comes with below Tools Buzz Buzz Plus Autobuzz

………Free Circuit Board Debug Tool

Clip Script Corecommander

Why boundary-scan?

Boundary Scan Testing

JTAG Technologies , The Netherland based company was formed in 1993.Since then they have lived and breathed the technology that has revolutionised the manufacture and test of digital and mixed signal PCBs the world over. JTAG Technologies remain the number one dedicated boundary-scan company. Through network of sales of f ices and in association with valued distributors have been able to solve thousands of board test problems by actively engaging with customers & world-wide suppor t network

w w w. i n e t e s t . c o . i n14

www.jtag.com

JTAG ProVision All Station

43

21

BSX

ETT

TTR

BSD

VisualizerSchematics / Layout

ModelsNon BS>8.000

Mapping

Executor

Compiler

Controller Types:JT3705 /USB

JT37x7 /TSI/PXI/PCI/RMI

JT3717

Netlis

t(s)

BS

DL

Module

s

Gen

era

tors

Clu

ster

Tes

t

Test

abili

ty

Cove

rage

Infr

a

Inte

r

Me

m.

Inte

r

1149

.6Te

st

1532

ISP

Fla

sh IS

P

Buz

z

Act

ive

Test

JFT

SV

F pl

ayer

Project Database

Able to handle single- chain and multi-chain boards, single- and multi-board designs

Design wizard for all applications

Automation with extensive device model library

Advanced view and control

Integration of JTAG Visualizer

Automation based on device model library

Fault coverage analysis

Suppor t for IEEE 1149.6

Give system designers maximum f lexibility and minimum constraints tests and ISP routines quickly, even for complicated system architectures

Prepare

Optimize designs for maximum coverage

Easy to learn, built-in boundary-scan exper tise

Rapid test and ISP application generation including 1149.6 applications such as LVDS

View your boundary-scan results on your schematic and layout

Prepare tests and in-system programming applications rapidly

Know your coverage before going to board layout Compare actual test results with the optimum obtainable for your design

Develop tests automatically to detect and diagnose faults in advanced digital networks such as LVDS with pin-level accuracy

JTAG ProVision Feature Benef it

Want to par tition the chains for top system per formance? It’s done, with JTAG ProVision. Use the built-in links to JTAG Visualizer™ and coverage analysis repor ts to optimize your design before layout. Then star t testing!

Test Development Sof tware

Go from design to ready-to-run, fast and thoroughly. With JTAG ProVision, you don’t have to be a JTAG exper t to prepare top-notch tests and ISP routines. ProVision’s wizard automates the impor t of netlists from vir tually any CAD system and guides you step-by-step. No need to build the scan chains: JTAG ProVision does it for you.

JTAG ProVision

15

Functional Test Solutions

iNETest Technologies aims to provide the best & world class functional test solutions for Production and end-of-line functional test of electronic, Sensor and mechatronic devices.

Functional testing is a quality assurance process and a type of black box testing that bases its test cases on the specif ications of the component under test. Functions are tested by feeding them input and examining the output.

Automatic or Automated Test Equipment (ATE) is any apparatus that per forms tests on a device, known as the Device Under Test (DUT), Equipment Under Test (EUT) or Unit Under Test (UUT), using automation to quickly per form measurements and evaluate the test results. An ATE can be a simple computer controlled digital multimeter, or a complicated system containing dozens of complex test instruments (real or simulated electronic test equipment) capable of automatically testing and diagnosing faults in sophisticated electronic packaged par ts.

Fields of application addressed are

1. Automatic Test Systems for ECU2. End of line testers integrated in automatic assembly lines3. Electronics for Automotive

· Vision & Haptics· Power train· Infotainment System

4. EMC Test Load Box 5. Automatic Test Equipment for Telematics System6. Electronics and Mechatronics functional test benches7. Sensor's programming and calibration stations8. Cluster's needle inser tion machines9. Smart keys test and data programming10. Automatic Test System for Telematics System

Electronics for Automotive - Vision & HapticsTest to per form Functional test system for Infotainment component, Electrical tests, Test inter face memory cards, Buttons Test, Knobs Test, CD inser tion test

Tests per formed are -Functional test system for Infotainment cluster, Electrical tests, Vision tests, Display test, Symbols, logos, printings verif ication, LED color test, LED light intensity test.

Electronics for Automotive – PowertrainControl Unit Test System to per form Simulation of the sensors that are connected to the ECU,Simulation of the digital signals that simulates the engine synchronism (eg. Crankshaf t, camshaf t etc.), Faults detectors, Faults detector of electronic power supply, Unit under Test (UUT) communications test. Inver ter functional tests including a real load, Over Voltage Inver ter functional test, Under Voltage Inver ter functional test, DC/DC Functional test, over Voltage DC/DC test ,under Voltage DC/DC functional test.

Electronics for Automotive – InfotainmentThe equipment is able to verify the functionality of the navigation and infotainment systems: Check of the signal transmission and reception of: Bluetooth, GSM, Radio Signal , WiMax,WiFi,RDS, Sirus,Audio,Dab Daq.

w w w. i n e t e s t . c o . i n

ICT Fixture

We offer complete line of ICT / ATE test fixtures and program development for Teradyne TestStation, Spectrum 8862/52, GenRad, Agilent i3070 & i1000D ICT, MDA tester and also specialise in custom mechanical fixtures along with Servo motor and Pneumatic activation.With more than 10 years of fixturing experience, iNETest strives to deliver high end fixture wirh many advance test solution embedded like FCT during ICT, Parallel Digital contact testing, dual stage etc....

Test Technology Consultant services: Design for test and test nodes reduction

Test Report services: Test Point Accessibility report, Feasibility Study Report, Statement of Work, Coverage Report

Probe Capability: 100 mils, 75 mils, 50 mils, 39 mils, 25 mils, Smallest Probe Capability-25 mils

Programming Capability:

Basic Programming

Unpowered Test. Open / Shor t Test Passive Components

Resistor Capacitor Diode Transistor

Unpowered Test. Testjet Test Polarity Test

Powered Test. Measure Voltage 74 Series ICs Standard Systems

Library Except all the Memory Chip µP

Advance Programming

µP and µC - BGAAdvance Boundary Scan(JTAG Compliance - IEEE)(JTAG Pins - TDI, DDO, TMC & TCK)

Memory Chip SDRAM SGRAM Series EEPROM Flash Programming CPLD

Enhance Program ServicesMCU ProgrammingBoundary Scan ChainTestCluster TestTest Node Reduction\ Split Fixture Programming

SingleWell Double Sided Fixture

DualWell Double Sided Fixture

16

www.aster-technologies.com

TestWay - The reference in testability analysis Electrical rules checking automation Integrated plat form for coverage analysis Lean Test optimization Intelligent probe placement Test & Assembly data generation

QuadView – The next generation of board viewers PCB visualization from native CAD Pin-level navigation Reconstruct schematic from netlist Hot-link interaction with all documents Manufacturing & test document creation and management Cross-probing between all views and repor ts

Improve your product yield and reliability,throughout the product life cycle.

ASTER Technologies is the leading supplier in Board-Level Testability analysis tools. These tools capitalise on proven exper tise in board testability and strong customer relations. Founded in 1993, ASTER develops a wide range of products dealing with PCB Testability, Visualisation and Quality Management.

FunctionalTest

Schematic BOM Layout Assembly StructuralTest

FieldReturns

Inspection

Design Manufacture Delivery

Electrical Rules Checking

Test Point Optimization

Probe Allocation

Mechanical Rules Checking

Test Coverage Estimation

Test Coverage Measurement

Paperless Repair

Assembly Data Generation

Inspection Data Generation

Test Data Generation

Data Collection

Quality Reporting

Statistical Process Control

Documentation Generation

Traceability and Tracking

Schematic, Layout and Netlist Visualization

TestWay Express - NPI from Design to Production Testability analysis from Layout Integrated plat form for coverage analysis Lean test optimisation Intelligent probe placement Test & Assembly program generation Test coverage measurement

Quad - The Quality Management System Automatic machine data collection Paperless repair advisor Traceability WIP Tracking Real time – web based repor ting Statistical Process Control

‘In the past, a limited post layout DfT analysis, based exclusively on mechanical verif ication was addressed by legacy tools such as FABMaster, CAMCAD, Vayo, Demille and Teradyne D2B. The layout f ile was loaded and a probe placement was per formed, in order to identify the usable physical access. For In-Circuit or Flying probe test this was considered enough to control the test quality.With zero defect expectations and the increasing board densities, to focus exclusively on mechanical DfT is no longer acceptable. DfT must be considered much earlier in the design workf low, so that testability is verif ied from schematic. Only then can we ensure the highest level of product quality for the minimum cost.”

17

w w w. i n e t e s t . c o . i n

www.rohde-schwarz.com

Mobile Test Solutions

For more than 80 years, Rohde & Schwarz has stood for quality, precision and innovation in all f ields of wireless communications. The privately owned company is strategically based on four pillars: test and measurement, broadcasting, secure communications, radiomonitoring and radiolocation. The electronics group, headquar tered in Munich (Germany), has a global presence and is among the world market leaders in all of its business f ields

18

R&S®CMW500 Wideband Radio CommunicationTesterThe R&S®CMW500 is a compact solution for fast and precise production testing of current and future wireless devices from basic mobile phones to the most sophisticated PDAs. The multitechnology plat form allows users to implement the concept of a lean production line from star t to f inish: A single measuring instrument covers all RF test requirements.

Key Specif ication 3.3 / 6GHz frequency range 40 / 70 MHZ analyzer / generator IF bandwidth 0.6dB generator level uncer tainty (DL) (100MHz to 3300MHz) 0.5dB measurement level uncer tainty (UL) (100MHz to 3300MHz

- 12 month cal. cycle)

CMW 500 Flexibility: One or two channels With or without display 3.3 or 6 GHz More accurate ore less maintenance costs IEEE, LAN or USB remote control Non signaling (ARB) or signaling (link handler) Cellular or non cellular technologies Upgrade to a RF R&D tester Upgrade to a application tester Upgrade to a protocol tester

The R&S®CMW500 unites three basic functions in one box: RF generator, RF analyzer and signaling (network emulation). As a result, it can be f lexibly used in all stages of production – from calibration and verif ication to functional testing. The extreme calability, test speed and measurement accuracy translate into minimum test costs. The compact tester approach with CPI remote control concept minimizes the ef for t involved in planning and upkeeping production test systems.

www.etsp.co.kr

TEMPERATURE & HUMIDITY CHAMBERS

ETSP is one of the Leading manufacturer of modular & Cost ef fective environment simulated equipments. These include Temperature & Humidity chamber, Hot & cold chambers, Walk in chambers, temperature ovens, Thermal shock chambers, salt spray chamber, CCT chamber, HAST chamber, PCT chamber, Dust chamber, Rain chamber, UV chamber, Altitude chamber Etc….

Temperature range: -40 ~ +180 °C & -70 ~ +180 °C (changeable according to user's demand)

Accuracy: Less than ± 0.1 °C & ± 1.5%RH Temperature uniformity: Less than ±0.5 °C Humidity range: 20% ~ 95% RH (10% ~ 98%RH is option) Volume: 60L, 150L, 392L, 1000L Controller: Programmable type TFT color LCD 5.7'' controller (Max

120 patterns, Max 1200 prof ile)

THERMAL SHOCK CHAMBER

Both Three Zone and Two zone chambers are available. Temperature range: Cold zone RT to -75 °C, Hot zone RT to

+200°C (changeable according to user's demand) Temperature stability: Less than ± 0.5°C Temperature uniformity: Less than ±1.5 °C Temperature recovery within 5°C /min Volume: 27L, 64L, 125L ,500L, 1000L

WALK IN CHAMBER/ Solar module chamber

Temperature range: -65 ~ +180 °C (Solid construction type) Temperature range: -65 ~ +70 °C (Panelised type) Temperature stability: Less than ± 0.5 °C Temperature uniformity: Less than ±2 °C Heat up rate: More than 5°C /min Cool down rate: 0.5~5°C /min Volume: 8000L, 15000L, 26400L, 36000L

Temperature range: RT ~ 250 °C & RT ~ 350 °C (changeable according to user's demand) Temperature stability: Less than ± 0.5°C Temperature uniformity: Less than ± 0.85% of the set point (Less than ±3.0 °C at 350 °C) Heat up rate: More than 6°C /min Volume: 96L, 175L, 275L, 600L ,1000L

INDUSTRIAL OVEN

Environmental Test Chamber

19

w w w. i n e t e s t . c o . i n

Environmental Test Chamber

Temperature range: RT ~ 65°C (Changeable according to user's demand)

Temperature stability: Less than ± 0.2 °C Temperature uniformity: Less than ±1.0°C Volume: 200L, 480L, 600L, 1000L and (Dif ferent size of

chambers are available on users demand.)

SALT SPRAY TESTER

ALTITUDE CHAMBER

With Humidity & without Humidity. Temperature range: -70°C ~+150°C (changeable

according to user's demand) accuracy: less than ± 0.3°C & ± 2% RH Humidity range: 10% ~ 98%RH Heat-up rate: More than 3 °C /min Pull-down rate: More than 2°C min Max. f inal vacuum: 1mbar (100pa) Vacuum pump: Two stage oil rotary pump or dry

pump Condensing: Air cooled or water cooled type Volume: 345L, 405L, 512L,720L

Highly Accelerated Temp/Humidity Stress Test. It has a developed as shor ter alternative to temperature Humidity Bias (THB) testing. If THB testing takes 1000 Hrs to complete, HAST results are available within 96-100Hrs.

Temperature range: 100 ~ 155 °C Temperature stability: Less than ± 0.5 °C Heat-rate: RT to 140°C within 60 minute Humidity range: 65%RH ~ 100% RH Humidity uniformity: Less Than ± 1% Humidity Accuracy: Less Than ± 0.1% Pressure range: 0.2~2.0kg/㎠G

This chamber is used for testing of photovoltaic (PV) modules and for UV pre-conditioning required by IEC 61215 and 61646. Also This series is to determine the accelerated ef fect of sunlight exposure . Both UVA315~385nm & UVB 280~315nm

ETSP UV CHAMBER

UV Temperature range: RT ~70 C. ULTRA-VITALUX UV high pressure lamp 300W. Microprocessor controller including self-diagnostics, warning

message function. High precision UV radiometer and radiation integrator.

www.etsp.co.kr

20

HAST CHAMBERS:

www.dataphysics.com

Test & Measurement Solutions for Noise & Vibration Applications.

Data Physics Corporation has been supplying high per formance test and measurement solutions since 1984. Headquar ter in San Jose, California; Data Physics has R&D and sales of f ices located around the world. Data Physics is ISO 9001-2008 cer tif ied, demonstrating the company's commitment quality. Data Physics have been providing solutions for Defence, Aerospace, Automotive and the electronics industry. We develop a wide range of products dealing with Vibration Analyzers, controllers and vibration shakers.

2 lbf (9 N) to 13,500 lbf (60 kN) range Robust and Optimized Design Automatic ver tical load centering Low stif fness suspension options Many armatures wound using copper rather

than aluminum – providing superior heat dissipation

Conservative and tested designs provide superior armature strength

SHAKERS

2- more than 1024 input channels 1 to 8 dedicated tachometer input 120- 150dB dynamic range Up to 49KHZ bandwidth & real time rate

(97 KHZ optional) Ultra-por table USB powered Ethernet

communication.

Single shaker Control with 2-morethan 1024 input channels

Single & Multiple shaker control up to 16 Actuators.

120-150dB dynamic range Conf igurable for operation with or without PC. 5 Ethernet Communication

SIGNAL CALC- DYNAMIC SIGNAL ANALYZERS

SIGNAL STAR – VIBRATION CONTROLLERS

{Typical Vibration Test System Layout

PA Linear amplif iers 30 VA to 1 KVA & DSA Switching amplif iers 1 KVA, 5 KVA, & 10 KVA modules Includes f ield & DG supplies Up to 470 KVA & Up to 95% ef f icient Switches at 100 kHz Includes f ield & degaussing supplies Safety interlocks Protection against over current and over temperature Remote & chamber inter faces & Drives all shakers Advanced I/O modulators On board DSP Internal signal generator for diagnostics Auto switching for sine, random, or shock testing

AMPLIFIERS

21

w w w. i n e t e s t . c o . i n22

www.yjlink.com

YJLink in Korea since its establishment in the 2003, had under taken suf f icient Factory Automation in Korea to make itself outstanding and be seen by its competitors. The Company comprises of f ive main teams who are well equipped with knowledge and the technical exper tise for their respective scope of responsibilities. All of team is to provide total satisfaction to its customers, therefore endlessly upgrading itself in human resources and goods to demands and requirement from the accounts and market.

MagazineLoader/Unloader

Vacuum Loader-Destacker

Gate Conveyor

PCB/Bare Board Cleaner Inverter (Vertical Turn Conveyor)

Buf fer/StackerAOI-NG Buf fer

Link Conveyor

Magazine Loader & Unloader Line (CE Type, Line up Conveyor, Standard Type, Human Technology Type) Wave Soldering IN/Out Feeder,

Vacuum Loader, Soldering Robot machine, PCB Cleaner, Manual Inser tion line, Link Conveyor, PCB Cutting machine, Work Table, Label machine, Gate & Shuttle Conveyor, Heating Conveyor, Sliding conveyor, Case Mounter machine/Srew assy machine, Inver ter, Boat Loader & Un-loader ( Lead Frame, BGA Turning Conveyor Board) in semiconductor production Buf fer Stacker Laser Marking MachineNG Stacker Buf fer stacker,

YJ Link of fers below products

Board Handling and Automation System Equipment

Laser Marking Machine

Work Table

www. microtest.com.tw

Test and Measurement Equipments

MICROTEST CORPORATION founded in 1993 is an ISO-9001 cer tif ied company and holds more than 12 patents. They are well organized by a team of talented technical and managerial professionals. The goal of the company is to promote customers' high precision, automatic testing and measuring instruments and equipment in this rapidly growing electronics, information and communication industry.

LCR Meters

3-in-1 Transformer Test System

Hi-Pot Tester

Specif ication:

Test Frequency: 20 Hz to 20 KHz, 200 KHz, 1 MHz Accuracy: 0.1%, GPIB/ RS-232 Inter face Comprehensive Measurement Functions:

Impendence IZI, Admittance IYI, Phase Angle (? ), Reactance (X), Conductance (G), Susceptance (B), Inductance (L), Capacitance (C), Quality Factor (Q)Dissipation Factor (D), Resistance (DCR)

Flexible Combination possible between Hi-pot Tester + Transformer Analyzer + Impulse/ Surge Analyzer

±0.1% Basic accuracy, Test frequency up to 1MHz Fast test speed, up to 30 Test item/sec, Open/Shor t & Correction function Full functions completed test RS-232 Inter face & Easy to link with PC Ramp time settable, Programming sequence test Built-in PLC remote inter face Link 7721 Impulse/Surge Tester Graphic LCD Display, RS-232 Inter face for PC link function.

Specif ication:

Specif ication:AC Hi-Pot : 100V~5000V AC, 50/60Hz, 0.01~10mADC Hi-Pot : 100V~6000V, 0.01~10mAInsulation : DC 100V~1000V, 10~9.999GOArcing : 1~10mA21 Channels Scan

Auto-discrimination7640 Series Hi-Pot/Insulation Tester are high per formance, fully automatic test system which integrates a precision hi-pot analyzer with a switch matrix. The system is able to discriminate the defective products even connected multiple samples.

Cable / Harness TesterImpedance Analyzer DC Bias Current Source

Also Deals in:Motor Stator Tester, Motor Armature Tester, LIPS, Inver ter ATE, Power ATE,

Accessories and Fixtures for all above instruments and equipments

23

w w w. i n e t e s t . c o . i n

www.jbctools.com

More than 80 years of experience have placed JBC at the technological forefront of tools for soldering and rework operations in electronics. Innovation, ef f iciency and reliability are the key features of a wide range of products which have been designed to satisfy the most demanding requirements of professionals. All JBC products comply with EC regulations and ESD recommendations.

TOP 10 Reasons to buy JBC1. Low Temperature Soldering2. Read & Feed3. Initial Heat Up4. Outstanding Tip Life5. Quick Change Over Tips6. Ergonomic Design7. Process Control8. Intelligent Heat Management9. Easy Calibration10. Improved Productivity

A complete range of Soldering, Desoldering and Rework Station

Rework Station: Designed for Rework and Repair of through-hole and SMT boards. The station’s 4 modules of fer various rework/repair operations.

Nano Station: The Nano station is a complete station designed for micro soldering and desoldering of small-size components like chips 0201, 0402 etc.

Custom-Made StationsThe JBC Modular Line features 5 control units, 6 stands, 10 tools and more than 300 car tridges and tips adaptable for the tools.

24

USB Connector advantages: Update station Sof tware Create Graphs of the Soldering Process Manage and Monitor parameters Via PC

The incorporation of a USB connector on all the stations and the new

control units for robots allow you to manage jobs remotely from a PC.

www.dr-storage.com

Dry Cabinet

Alarm Hygrometer

Alarm Hygrometer

SensorLook Network System

Nitrogen Controller

Humidity Management Solutions ( Dry Cabinets)

Ace Dragon Corporation , Established in 1991 in Taiwan . Ace Dragon Corporation Headquar tered in Hsinchu Science Park, Taiwan with R& D ana Manufacturing center. Ace Dragon Corporation under the brand name of Dr. Storage provides Total Humidity Control System.

Features:

200 Ltr 400 Ltr315 Ltr 600 Ltr 1200 Ltr

≦5%RH Dry Cabinet 8~50%RH Dry Cabinet20~50%RH Dry CabinetBaking 40℃ Dry Cabinet

Sensor Look CentralizedMonitoring SystemDigital Nitrogen ControllerAlarm HygrometerData Logger & Reader

25

w w w. i n e t e s t . c o . i n

www.ogpnet.com

Quality Vision International

Itaca Flex Guage

OGP FLASH CNC 300

An industrialized and rugged alternative to custom gauging solutions. Useful for precision par ts such as gears, valves bodies, turbine blades, shaf ts, racks.

®Quality Vision International (QVI ) is the world's largest vision metrology company. The company designs and builds a complete line of dimensional measuring machines that combine optical, laser, and contact sensors into easy to use systems. QVI systems are used by manufacturers in over 75 countries around the world to measure and inspect their products for quality and process control.

Smartscope Flash CNC 300 is a large capacity video Measuring system for dimensional verif ication of manufactured par ts.

Travel axis (XYZ) mm axis : (300 x 300 x 250 )mm Measuring unit dimensions approx.( LWH):(80x85x80)cm Work table : Hardcoat anodized with f ixture holes &

Removable stage glass,30 kg load capacity

Measuring range : ( 250 x 165 x 100 ) mm Stage Drive velocity : 400 mm/sec Load Capacity : 25 kg maximum payload

Travel axis (XYZ)mm : ( 350 x 200 x 250 )mm Touch trigger or scanning probe

High accuracy, small foot print non-contact metrology System

View Pinnacle

26

www.pemnet.com

Self Clinching fasteners

PEM provides a complete range of self clinching fastener solutions for your thin sheet applications. They are the brand leaders and founder of this technology. We of fer product ranges from nuts, standof fs, studs, panel fasteners, inser ts, toolings & presses to install the fasteners.

Better threading strength in sheet materials, Eliminate loose hardware Reduced installation time Eliminates spot welding operations Flush & cosmetic f inish Eliminate Rework

WHY PEM?

APPLICATIONS

ATM's • Agriculture equipment • Air bags • Alarm systems • Appliances • Arcade games • Automotive

• Avionics • Black boxes • Computers • Control panels • Copiers • Consumer electronics • Fabricated

metal • Facsimile • Food processing • Gaming machines • Gas pumps • Hospital beds • Laser

equipment • Medical equipment • Microwave equipment • Modems • Of f ice furniture • Power supplies

• Stereo equipment • Telecom • Telephone systems • Televisions • Test equipment • Truck roll-up

doors • Vending machines • VCRs • Sheet-metal boxes • enclosures.

400 – 16,000 lb of Ram Force

24" Throat Depth

Touch Screen Control

Light Stream™ Safety Feature

Dual Language Available

Wide Variety of Auto Tooling Options

110VAC / 80-120 psi Air Requirement

Fully Automatic or Manual Press

PEMSERTER presses are designed where applications requiring

accuracy and reliability are key. From simple hand-held press

equipment, to fully automated mot ion cont rol presses,

PEMSERTER presses continue to set the standard for per formance

and cost saving.

Leading the way in thin sheet fastening

Features: Pneumatic power for speed, consistency and simple operation Ram Force : 1.8 to 53.4 kN/ 400 to 12000 lbs Pressure System Type : Pneumatic/ Lever Air Requirement : 6-7 Bar/ 90-100 psi Throat Depth : 45.7 cm/ 18 inches

Series 4 Press

Series 2000

R

27

Tota

l In

spection &

Testing S

olu

tion

for

the P

CB A

ssem

bly

Lin

e

Vi Te

chnolo

gy

Pre-

Post

Reflo

w A

OI

ETSP

Envi

ronm

enta

l Tes

ting

BO

X B

UIL

D

Tera

dyne

In-C

ircui

t Tes

ter

ww

w.in

etes

t.co.

in

PBT

Sten

cilc

lean

SIA

ON

E

STO

P

SO

LU

TIO

NBo

ard

Insp

ectio

n &

Tes

ting

iNE

Test

Tech

no

log

ies In

dia

Pvt.

Ltd

. p

resen

ts

Fuji N

XT (P

ick

& P

lace

)fro

m N

MTr

onic

s

YJ

Link

Load

er/U

nloa

der

JBC

Sold

erin

g &

DeS

olde

ring

Stat

ions

Mic

rote

st

Test

& M

easu

rem

ent E

quip

men

ts

Speci

ality

Coa

ting

Syste

ms (

SCS)

Prec

isio

n (C

onfo

rmal

)C

oatin

g Sy

stem

s

Auro

tek

S-33

0WPC

B Se

para

tor

Takaya

Flyin

g Pr

obe

Teste

rFu

nctio

nal T

este

r

Da

ta IO

IC P

rogr

amm

er

Te

st

Str

ate

gy

Ex

pe

rts

!!

PBT

Supe

r Sw

ash

Sten

cil c

lean

ing

Fea

sa

LED

Ana

lyse

r

YX

LON

X-Ra

y In

spec

tion

JTA

G T

ech

nolo

gie

s

Boun

dary

Sca

n Te

sting

iNETest Technologies India Pvt. Ltd.#7/4, 1st Main Road (Leo Muthu Street)

Kalaimagal Nagar, Ekaduthangal, Chennai - 600 032.Tel.: +91 44 4598 5500, Fax: +91 44 4598 5522

,

www.inetest.co.in

NOIDASDF E-17 & C-2, NOIDA Special,Economic Zone,Noida Dadri Road, Phase - II,Noida - 201 305,[U.P.], INDIA

Tel: +91 120 4603 500 +91 120 4603 501Fax: +91 120 4603 535

Offi

ce o

f an

asso

ciat

ed p

artn

er N

MTr

onic

s In

dia

Pvt.

Ltd.

NEW DELHILB 2, Prakash Deep Building,7, Tolstoy Marg,Connaught Place,New Delhi - 110 001

Tel.: + 91 11 2371 7548

Fax: + 91 11 2371 7548

PUNET17, Destination Center,Magarpatta City,Hadapsar,Pune -411028

Tel: +91 20 6600 9804 to 07

Fax: +91 20 6600 9808

BANGALORE304 & 308, 3rd Floor;Sophia’s Choice,7, St. Mark's Road,Bangalore - 560 001

Tel: +91 80 4272 0000 +91 80 4272 0011Fax: +91 80 4272 0010

Singapore Corporate Office: Global Technosoft Pte. Ltd. No. 54 Serangoon North Avenue 4, #01-01, SINGAPORE 555854. Tel.: +65 6518 2200, Fax.: +65 6518 2222www.ellipsiz.com www.global-technosoft.com

Please send your enquiries to india.sales@inetest.co.in

Aug. 2015

Speciality CoatingSystems (SCS)www.scscoatings.com

Aurotek Corporationwww.robot.com.tw

Dataphysics Corporationwww.dataphysics.com

ETSP Co. Ltd.www.etsp.co.kr

Aster Technologieswww.aster-technologies.com

OGPwww.smartscope.in

Finetech GmbH & Co. KGwww.finetech.de

Penn EngineeringSingapore Pte. Ltd.www.pemnet.com

R

YJ Linkwww.yjlink.com

Takaya Corp.www.takaya.co.jp

JBC Soldering S.L.www.jbctools.com

Feasawww.feasa.com

JTAG Technologieswww.jtag.com

ACE Dragon Corporationwww.dr-storage.com

VI Technologywww.vitechnology.com

PBT Roznov p R, s.r.o.www.pbt.cz

Microtest Co., Ltd.www.microtest.com.tw

Data I/O Corporationwww.dataio.com

Teradyne Inc.www.teradyne.com

YXLON International GmbHwww.yxlon.com