8/3/2019 INF2011 industrial noise _wikipedia

http://slidepdf.com/reader/full/inf2011-industrial-noise-wikipedia 1/2

09/12/2011 12:26Industrial noise - Wikipedia, the free encyclopedia

Page 1 of 2http://en.wikipedia.org/wiki/Industrial_noise

Industrial noiseFrom Wikipedia, the free encyclopedia

Industrial noise is usually considered mainly from the point of view of environmental health and safety,

rather than nuisance, as sustained exposure can cause permanent hearing damage. Traditionally,

occupational noise has been a hazard linked to heavy industries such as ship-building and associated only

with noise induced hearing loss (NIHL). Modern thinking in occupational safety and health identifies noiseas hazardous to worker safety and health in many places of employment and by a variety of means.

Noise can not only cause hearing impairment (at long-term exposures of over 85 decibels (dB), known as an

exposure action value), but it also acts as a causal factor for stress and raises systolic blood pressure.

Additionally, it can be a causal factor in work accidents, both by masking hazards and warning signals, and

by impeding concentration.

Noise also acts synergistically with other hazards to increase the risk of harm to workers. In particular, noise

and dangerous substances (e.g. some solvents) that have some tendencies towards ototoxicity may give riseto rapid ear damage.

A-weighted measurements are commonly used to determine noise levels that can cause harm to the human

ear, and special exposure meters are available that integrate noise over a period of time to give an Leq value

(equivalent sound pressure level), defined by standards.

Industrial noise reduction

Acoustic quieting is the process of making machinery quieter by damping vibrations to prevent them from

reaching the observer.

When two identical industrial noise sources are side by side producing a recorded noise at 100 dB(A) the

reduction in noise from shutting off one of the noise sources is about 3 dB resulting in 97 dB(A).

When one doubles the distance from a noise source the recorded noise level is reduced by 6 dB. This is also

called the Rule of 6 . This is based on the fact that the equation to calculate noise attenuation at a distance d 2,

knowing the SPL at distance d 1 is given by , where d is the

distance. If the distance is doubled, the equation simplifies to 20 * log10(2) which equals 6.02 (or approx.

6)

See also

EarplugEarmuffsNoise health effectsNoise controlNoise mitigationNoise pollution

8/3/2019 INF2011 industrial noise _wikipedia

http://slidepdf.com/reader/full/inf2011-industrial-noise-wikipedia 2/2

09/12/2011 12:26Industrial noise - Wikipedia, the free encyclopedia

Page 2 of 2http://en.wikipedia.org/wiki/Industrial_noise

Noise regulationProtective clothingA-weightingITU-R 468 noise weightingWeighting filter

Equal-loudness contourSafe-In-Sound Award Excellence in Hearing Loss Prevention

External links

Occupational Safety & Health Administration (http://www.osha.gov)Industrial Deafness (http://www.industrialdeafness.org.uk/)Industrial Deafness Watch UK (http://www.industrialdeafnesswatch.co.uk/)

Retrieved from "http://en.wikipedia.org/w/index.php?title=Industrial_noise&oldid=447301471"

Categories: Noise Noise pollution Occupational safety and health Industrial hygiene

This page was last modified on 29 August 2011 at 11:40.Text is available under the Creative Commons Attribution-ShareAlike License; additional termsmay apply. See Terms of use for details.Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profitorganization.