infusion tea brewer for misitcb for mis (tea dispensers sold separately) dimensions: 34.2” h x...
TRANSCRIPT
Related Products
Features
TDO-N – Tea Dispenser Product No. : 39600.0067Capacity: 4 gallonsWeight: 12.3 lbs. Dimensions:21.2” H x 6.1” W x 25” D53.8cm H x 15.5cm W x 63.5cm D
TDO-N 4.0 LP– Tea Dispenser Product No. : 39600.0068Capacity: 4 gallonsWeight: 9.3 lbs. Dimensions:12.3” H x 6.1” W x 21.9” D31.2cm H x 15.5cm W x 55.6cm D
Replacement LidProduct No. : 39624.0000
Lid Retainer Clip KitProduct No.: 46248.0000
Rapak Faucet*Product No.: 47326.0000
Kit with Brew Funnel, Recipe Cardand Coffee Filters (500 case)Product No.: 52133.0000
ITCB for MIS (tea dispensers sold separately)
Dimensions: 34.2” H x 12.75” W x 30.52” D(86.9cm H x 32.4cm W x 77.5cm D)
Model Agency ListingITCB
Infusion Tea Brewer for MIS
UL LISTED
Yellow Pouchpack Tea Funnel Product No. : 39756.0001
Dispenser BoosterProduct No. : 50845.0001Dimensions:11.1” H x 12.1” W x 19.6” D28.3cm H x 30.8cm W x 49.8cm D
Coffee Filter Pack (500 case) Product No. : 20138.1000Dimensions: 51⁄4” Base x 41⁄4” Sidewall13.3 cm Base x 10.8 cm Sidewall
Perfect iced tea from a brewer less than 12” wide• Two preset button selections 1. Sweet Tea 2. Unsweet Tea• Brew Sweet Tea with “One Push of a Button”• Brew Iced Coffee with “One Push of a Button”• Utilizes High Intensity Mixing to consistently deliver sweetener during brew cycle• Set includes dispenser booster for brewing directly into tea dispensers• Higher capacity than BUNN TB3Q, large tank provides back-to-back
brewing capacity and abundant hot water• 208 volt wiring provides rapid tank recovery• Brew lock out feature ensures perfect water temperature for every brew• Digital temperature control• Display machine status• Brew counter keeps track of how many batches brewed• English and Spanish alphanumeric display• Two year parts and labor warranty
Narrow Tea Dispensers• Dispenser has 4 gallon (15.1L) capacity• Integrated lid retainer clips prevents tampering• Rapack faucet supplied with TDO-N and
TDO-N 4.0 LP dispensers - wing nut and C clip included *Faucet for use with tea and coffee dispenser liners only.
01/16
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.All dimensions shown in inches.
Dimensions & Specifications
Bunn-O-Matic® Corporation - 5020 Ash Grove Drive, Springfield, Illinois 62711 • 800-637-8606 • 217-529-6601 • www.bunn.com
7.212.8
11.2
12.6
21.6
21.8230.52
2.0
5.0
1.419.0386.7
34.2
5.0
10.12
12.75
6.5
Model Product # Volts Amps Total Tea Brewing Cubic Shipping Cord Watts Capacity Measure Weight AttachedITCB 35700.0411 208* 13 2650 40 gal/hr 10.3 ft3 45 lbs. Yes* ITCB 35700.0062 includes 35700.0411 brewer, 51870.0000 installation kit and 50845.0001 TDO-N booster. Dispensers not included
*Power Cord: 12/4, NEMA L14-20P plug, 20 amp
Electrical: Requires 3 wires plus ground service rated 208V (*2 hots, neutral and ground required), single phase, 60Hz. An internal terminal block is configured for connection to a 3-wire plus ground.
Plumbing: 20-90 psi (138-621 kPa). Model supplied with a 1⁄2” BARB x 2. Requires minimum 1GPM water flow.
1/16 © Bunn-O-Matic Corporation