innovation intelligence ® section 15 contact modeling
TRANSCRIPT
Innovation Intelligence®
Section 15
Contact Modeling
Copyright © 2012 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
Applications | Analysis | Structural | Contact
Feature based contact pair Identification
Automated File based contact creation.
Supports contact definition for Abaqus,
OptiStruct ,ADVC ,Nastran ,Ansys and
Permas .
Contact Modeling
Copyright © 2012 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
Feature based contact pair identificationContact pairs either planar / cylindrical / both between bodies within a specified
tolerance can be identified automatically.
Planar Contact Pairs Cylindrical Contact Pairs
Copyright © 2012 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
Contact Modeling
Copyright © 2012 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
Contact definition between bodies / node sets / element sets / groups can be
defined in a text file (*.dat).
File based contact definition can be imported and contacts will be created
automatically between the specified entities. Node sets / Element sets / Groups
have to be pre-defined before importing the contact definition file.
Contact definition file can be exported from SimLab.
This improves modelling robustness and consistent contact definitions to avoid
errors.
File Based Contact Creation
Copyright © 2012 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
Contact definition file template :
File Based Contact Creation
Copyright © 2012 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
Surface Based Interaction
Surface Interaction for Contact Analysis can be defined using
Applications | Analysis | Structural | Surface Interaction
Surface Behaviour - No Separation,
Hard, Tabular, Exponential and Gap
Conductance.
Pressure Over Closure
(Pressure vs Over Closure)
Conductance
(Conductance vs Clearance vs
Temperature)
Friction Coefficient
Copyright © 2012 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
Surface Interaction
Abaqus Change Friction card supported to vary the friction properties from one
load step to another load step.
Change Friction Option
Copyright © 2012 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
Clearance and Interference for contact analysis can be defined using the following
tool. This tool is in
Applications | Analysis | Structural | Press-Fit
Amplitude curve for Abaqus contact interference can be defined.
Press Fit
Copyright © 2012 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
• Option to set user desired master and slave surface name is supported.
• This option can be used by right clicking the contact in Lbc tree.
Contact