insider - globalmachinerysales.com.auglobalmachinerysales.com.au/new/wp-content/uploads/... ·...

4
SUMMER 2016 GLOBAL MACHINERY SALES HAS BECOME ... G lobal Machinery Sales is now the authorised dealer for Morbark wood chippers in Victoria and New South Wales, making us one of the biggest dealers of commercial wood chippers in Australia. Our range of Morbark chippers features 8-inch, 12-inch, 15-inch, 18-inch and 20-inch machines powered by CAT or Cummins Diesel engines in 97 to 400 horsepower. Morbark has a reputation for designing and building world-class equipment which made the decision to take them on an easy one. We service and repair all Morbark chippers and our parts department stocks all the necessary parts. Morbark chippers are strong – they chip strong, grind strong and work strong, and together with Morbark you can be certain we have all your wood chipping needs covered. Contact us for more info or a demo today. AERIAL PLATFORMS MORBARK STRONG! insider 97 hp CAT diesel engine 12-inch chipping capacity M12RX SPECIAL INTRODUCTORY PRICE $57,900 INC. GST inside: DY620 Mini Loader Editorial New Chipper Truck for Hire CMC Spider Lift Test Drive New Bandit Service Experience Used Equipment Plus More Safety bump bar Australian kerbside

Upload: others

Post on 12-Aug-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: insider - globalmachinerysales.com.auglobalmachinerysales.com.au/new/wp-content/uploads/... · 18-inch and 20-inch machines powered by CAT or Cummins Diesel engines in 97 to 400 horsepower

SUMMER 2016

GLOBAL MACHINERY SALES HAS BECOME ...

Global Machinery Sales is now the authorised dealer

for Morbark wood chippers in Victoria and New South Wales, making us one of the biggest dealers of commercial wood chippers in Australia. Our range of Morbark chippers features 8-inch, 12-inch, 15-inch,

18-inch and 20-inch machines powered by CAT or Cummins Diesel engines in 97 to 400 horsepower. Morbark has a reputation for designing and building world-class equipment which made the decision to take them on an easy one. We service and repair all Morbark chippers

and our parts department stocks all the necessary parts. Morbark chippers are strong – they chip strong, grind strong and work strong, and together with Morbark you can be certain we have all your wood chipping needs covered. Contact us for more info or a demo today.

AERIAL PLATFORMS

MORBARK STRONG!

insider97 hp CAT diesel engine12-inch chipping capacity

M12RXSPECIAL INTRODUCTORY PRICE $57,900

INC. GST

inside: DY620 Mini Loader Editorial

New Chipper Truck for Hire

CMC Spider Lift Test Drive

New Bandit Service Experience

Used Equipment

Plus More

Safety bump barAustralian kerbside

Page 2: insider - globalmachinerysales.com.auglobalmachinerysales.com.au/new/wp-content/uploads/... · 18-inch and 20-inch machines powered by CAT or Cummins Diesel engines in 97 to 400 horsepower

Angry Ant 620 loaderIntroduced into the Australian market

nearly 3 years ago, and with over 12 years of sales in Europe, the Angry Ant 620 Mini Loader delivers power and productivity in a compact machine. No longer do you have to pay high prices for similar European models. Brian Evans at Global Machinery Sales said, “All the European mini loaders are great machines - that is until you quote them a price! So we sourced a Chinese manufacturer who has been

successfully selling to Europe for well over 12 years, uses well-known engine brands and are at a fantastic price.” The 620 model is powered by a 30hp Yanmar engine with hydrostatic 4WD. Joystick operation and conveniently located buttons and foot pedals make the Angry Ant easy to operate. The compact size of the Angry Ant and the telescopic boom results in fantastic usability in confined spaces. Front and optional rear hydraulic output allows

for the attachment of all kinds of machinery. The instrument panel has warning lights for all systems and the engine cover is easily removed with 4 bolts. Features such as ROPS canopy for driver protection, a rotating working light, reversing beeper and lights, cylinder protection to prevent boom failure and articulated front to reduce rollover risk make the Angry Ant an incredibly safe loader to work with. Contact us for a demo today.

TRUCK$395 DAILY

LATEST ADDITION TO OUR RENTAL FLEET

CHIPPER TRUCK FOR HIRE

CALL 1300 072 926 TO BOOK

EYE ON THE INDUSTRY: ANGRY ANT 620 MINI LOADER

LANDSCAPE CONTRACTOR MAGAZINE

Page 3: insider - globalmachinerysales.com.auglobalmachinerysales.com.au/new/wp-content/uploads/... · 18-inch and 20-inch machines powered by CAT or Cummins Diesel engines in 97 to 400 horsepower

Angry Ant 620 loaderSo you have issues with access? Or perhaps the tree isn’t safe to climb?

Fear not, Global Machinery Sales have a suitable solution for your problems.

AERIAL PLATFORMS

The CMC S19E Arbor Pro is a track mounted spider style mobile

elevated work platform and it has been designed with your job in mind. The tree industry is tough and any steps we can take to make it easier and safer are welcome, in my opinion, which is where the ArborPro comes in. It’s here to do exactly that. I was asked by The Australian Arbor Age magazine if I could test drive the Arbor Pro on one of my job sites. Several sprang to mind but this one in particular did strike me as more suited than the others. The task at hand was the removal of a mature Silky Oak. Although not deemed unstable or unsafe to climb, it was near 20m tall and had suitable access for a tracked MEWP (Mobile Elevated Work Platform). The Arbor Pro weighs 2690kg and access to the setup was through a freshly levelled building site. It was only a week after our big Sydney storm and the ground was still soft but had no ill effect on the track propelled Arbor Pro. Some fencing was removed and the Arbor Pro was efficiently set up in the middle of the customer’s lawn, a task

that was made easier because of the new safer non-slip outrigger pads. Had we not have had the grace of removing fence panels for access, the ArborPro is able to fit through a gap slightly wider than 0.78m, so rest assured on any tight access issues. The setup footprint is only 3.9m x 3.25m square, enabling you to make the most of any small space. So we were in position, safely set up and I had had a run down on the Arbor Pro’s controls that are really simple and very user friendly. It was time to get back to my task of removing this 20m tall Silky Oak. I loaded the basket with all the tools I needed; the Arbor Pro is rated to lift 200kg in the basket in any work position, so there are no worries about being overloaded. The Arbor Pro is very versatile. The articulating boom is telescopic and has a jib, making my journey around the tree quick, precise and easy. I ascended to the upper canopy and installed the pulley and rigging rope, noting how responsive the controls were and how stable the Arbor Pro was at full stick. Back down I went to the lower

branches, hand holding a few cut sections to get to the trunk, then starting to remove whole limbs with the rigging rope. Working my way around the tree I noticed that I was ahead of the ground staff, a good sign that the Arbor Pro is up to the task. The Arbor Pro is quality built and comes with several power options. The model I used has the Honda 11.7hp petrol engine but you could opt for the Kubota diesel engine. Alternatively, if you prefer to work in peace and quiet, there is provision for a duel voltage AC motor. The maximum working height is 18.7m and maximum working out reach is 9.2m. All this is comprised on a sturdy tracked platform that can fit through your average front door and really opens up your options for safer tree work. I enjoyed using the Arbor Pro Boom Lift. It’s well built and has controls that are fluid and easy to use. It’s built for the Tree Professional, people like you and me and, if you have not used one yet, I suggest calling them for a demo, so you can see for yourself the benefits of owning or hiring an Arbor Pro. Reviewed by Mathew Smith.

TEST DRIVE: CMC S19E ARBOR PRO SPIDER LIFT ARBOR AGE MAGAZINE

Page 4: insider - globalmachinerysales.com.auglobalmachinerysales.com.au/new/wp-content/uploads/... · 18-inch and 20-inch machines powered by CAT or Cummins Diesel engines in 97 to 400 horsepower

Bandit servicing? We’ve got you covered. When it comes to Bandit Servicing in Melbourne, we have it covered for experience with Matt McDonald now joining the team in our Dandenong South office. Matt worked at Bandit Tree Equipment in Melbourne for five years and has a tremendous understanding and knowledge of Bandit equipment. Matt joins long-serving Global employee, Bill Irving. Bill has been working on all wood chipper brands including Bandit for over 20 years. If you own a Bandit, Global Machinery Sales has you covered.

) 1300 072 926

NSW Unit 1/21 Penny Place Arndell Park 2148E [email protected] (02) 8678 2478

VIC 24-28 Williams Road Dandenong Sth. 3175 E [email protected] (03) 9791 7676

www.globalmachinerysales.com.au

2012 RC6DV 6”, 980hrs, 35hp Vanguard, $19,900 inc. GST.

2007 Hinowa 19.65 with trailor, 2700hrs, $39,000 inc. GST.

2013 CMC S15 450hrs, 15m height, $65,890 inc. GST.

2009 RC16.5 17”, 1175hrs, 140hp CAT, $49,000 inc. GST.

2015 RG45 316hrs, 44hp Kubota, 4WD, $49,900 inc. GST.

2012 RH1754-240hp Cummins, 180hrs, $295,000 inc. GST.

Bandit 2100SP 100hrs, 38hp Kohler, $19,900 inc. GST.

2013 RH1754-240hp Cummins, 470hrs, $275,000 inc. GST.

Joke of the MonthA guy was driving in a car with a blonde. He told her to stick her head out the window and see if the blinker worked. She stuck her head out and said, “Yes, No, Yes, No, Yes...”

CHRISTMAS CLOSURE DATES

Used equipment

Merry Christmas from Global Machinery Sales!It’s been a big year at Global Machinery Sales and we look forward to continuing our success in 2017. We would like to thank you for your support throughout the year and we wish you and your family a merry Chistmas and a happy New Year. Travel safe over the holiday period and thanks again for a wonderful year.

MELB SYD

REOPENS AT...8am 3rd Jan8am 9th Jan

CLOSES AT...5pm 22nd Dec5pm 22nd Dec