installation canon general
TRANSCRIPT
8/9/2019 Installation Canon General
http://slidepdf.com/reader/full/installation-canon-general 1/4
Tanks work :
OPEN LEFT COVERS
FILL INK WITH A SYRINGE WITH NEEDLE
WHEN WORKS OPEN ALL THE PLUGS ON ARROW SIDES,
R EPL AC E ALL T HE PL UG S t o L PL UG S' '
OPEN LEFT COVERS
CLOSE LEFT COVERS
1
2
3
Refill ink
INSTALLATION INSTRUCTION I nk s ys tem f or C AN printers
OPEN COVERS
AND PLACE UP,
INK FLOW INTO
CARTRIDGES
DO NOT MAKE ITDIRTY HERE
When all
and open the covers of cartridges, hold the tanks high up,
s and cartridge covers.
, emove the rubber plug from the sprue of the ink cartridge, use a common syringe to connect to the sprue, pull
the syringe piston for air-removing, the ink will then flow into the ink
cartridge automatically. ,
filling ink r s
After filling stuff the rubber plug
For CAN Printer s
General install way
Attention
1. Not drinkable, keep it out of the reach of children
2. Avoid exposure to direct sunshine and don’t keep it the high or freezing temperature.
3. Avoid collision and fall down.
.Please do not take out the cartridges at random after installing the ink system
.Using it in the temperature of 10-40℃
system has passed the strict compatible checking, so we suggest our ink and cartridges to keep the printing quality.
at
ing
4 .
5
6.The ink using
7.Mixing two different brand inks into the ink system is not recommended.
8.Keep the ink tanks and printer in the same level. Do not place the tanks higher or lower than their printer
1
Instruction
4 Syr in ge 1 Set
). 1 Set
). Pipeline Clincher or Arm Support 1 Set
3). Installation 1 Copy
).
Continuous ink system
2
This packing including
8/9/2019 Installation Canon General
http://slidepdf.com/reader/full/installation-canon-general 2/4
Unpacking Instruction
1 ink system
Instruction
4 Syringe 1 Set
. CIS ( ) 1 Set
. P ipeli ne Cl inc her or A rm Support 1 Set
3. Installation 1 Copy
.
Continuous ink system
2
Note
Refilling ink
Tanks working :
ALL OPEN
F I L L I N K
T O T H I S L E V E L
(Reommend)
1. Not drinkable, keep it out of the reach of children
2. Avoid exposure to direct sunshine and don’t keep it in the high or freezing temperature.
3. Avoid collision and fallen down.
.Please do not take out the cartridges at random after install the CIS ink system
.Using it in the temperature of 10-40℃
C IS s ys te m h as p as se d t he s tr ic t c ompa tible c he ck in g, w e t o u se o ur ink t o t he p rint in g q ua li ty .
8 , ,
4 .
5
6.The ink recommend , ensure
7.Mixing two different brand inks into the ink system is not recommended.
.Before you in stall this ink system please remove the remainder inks on the print heads the way is as below
9.Keep the ink tanks and printer in the same level. Do not place the tanks higher or lower than their printer
F I L L F U L L I N K
(Not recommend)
When all
and open the covers of cartridges, hold the tanks high up,
s and cartridge covers.
, emove the rubber plug from the sprue of the ink cartridge, use a common syringe to connect to the sprue, pull
the syringe piston for air-removing, the ink will then flow into the ink
cartridge automatically. ,
filling ink r s
After filling stuff the rubber plug
WHEN FILLING
OPEN ALL PLUGS
Page 1
Continuous ink system
Continuous ink supply system
Continuous ink flow system
Continuous ink feed system
Bulk ink system
For CAN Printer s
OPEN COVERS
AND PLACE UP,INK FLOW INTO
CARTRIDGES
OPEN 1
C L
O S E
A L L
Ok
CLOSE ALL CLOSE 2OPEN 1 CLOSE 2
CAN FILL INK AT ANY TIME
WHEN INK IS L 2CM,
YOU MUST FILL INK.
.
ESS THAN
AFTER FILLING
OR MOV ING TA NKS
WHEN WORKING
OPEN SMALL PLUG
CLOSE BIG PLUG
,
,2C M
DO NOT MAKE ITDIRTY HERE
General install way
INSTALLATION INSTRUCTIONInk systems for CAN printers
' , , 'keep the old cartridges in the printer clean heads for some times untill can not print out any colors
8/9/2019 Installation Canon General
http://slidepdf.com/reader/full/installation-canon-general 3/4
INSTALL CHIPS i f the original ink cartridge without chips you can ignore this step( , )Carefully remove the original chips from original cartridges as the above pictures. Pay more attention to the chips
when you do this procedure, make sure that the chips are not damaged.
Put some glue on the socket of system’s cartridge. Then stick original chips into the socket according to thecolor of cartridges. Please make sure that the chips no matches with cartridge number.
1
Installation Procedure
2 INSTALL CARTRIDGES
P . Then place the cartridges into
P L E A SE M A K E S U R E T H AT Y O U H A V E P R I N T E D C L E A N A L L R E M A IN I N G I N K S
lace the pipelines lock on lock position printer.Please press the cartridge and make sure that every cartridge is well installed according to the color label.
' '
3 INSTALL PIPELINES Clamp the pipelines into the support arm as the above pictures shown.
ADJUST PIPELINES Adjust the pipelines length and move the cartridge carriage from left to right for severaltimes.Please make sure there will be no block and collision when the cartridges moving from one side to the other.
Insure there's plenty length of tube to make the cartridge carriage which can move to the right side thoroughly.
Reset cartridges
If use for a long time ,the computer tells you to replace cartridge doesn't work, and the ink light lights
press the fresh button for 5 seconds, sometime need redo several times, then the light is off, all ok.' '
4 After adjust the pipelines well please insert the hole of printer cover with a small paper Place the pipelines lock on the open posit ionClose the cover of printer F inis h r e ad y to u se
, .' ' .
.,
ADJUST WELL FINISH
Middle
I F Y O U R O R I G IN A L I N K C A R T RI D G E W I T HO U T C H I P S Y O U C A N I G N O R E T H I S S T E P ,
OPEN
LOCKREMAINING INKS
8/9/2019 Installation Canon General
http://slidepdf.com/reader/full/installation-canon-general 4/4
For 190
For 195D
For I990 Ip3000&
For Ip1000
For IP6000D
Page 3