installation guide - supervag-key.com · content of suitcase diagnostic tools | chiptuning | keys 3...
TRANSCRIPT
INSTALLATION GUIDE
1
table of contents & Introduction ................................. page 1CONTENT OF SUITCASE ................................. page 2–3I. ACTIVATION ................................. page 4II. INSTALLATION ................................. page 5III. CONNECTION ................................. page 6IV. CONFIGURATION ................................. page 7V. HELPDESK ................................. page 8VI. EXTRA ACCESSORIES ................................. page 9
DIAGNOSTIC TOOLSprofessional diagnostic tools for VW, Skoda, Audi, Seat• full diagnostic, basic settings, coding, adapting, measured values, actuators, ...
TOOLBOXspecialized tool to work with EEPROM and odometer• reading and writing of EEPROM, control unit cloning, odometer correction, ...
KEYspecialized tool for Keys&Remotes • key & remote programming and learning functions
FLASHspecialized tool for CHIPTUNING• maximum reliability and safety data writing all you need for engine chiptuning
INTRODUCTIONThank you for purchasing SuperVAG. The following instructions will guide you through the installation process, configuration, and activation of the program. The activation process is easy and should only take a few moments from start to finish.
TABLE OF CONTENTS
INSTALLATIONDVD
USBINTERFACE
BLUETOOTHINTERFACE
USBCABLE
CONTENT OF SUITCASEDIAGNOSTIC TOOLS | CHIPTUNING | KEYS
2
DURABLESUITCASE
OBD TO JACKwith adapter for
+12V power supply
FOR KEYS ONLY
FOR DIAGNOSTIC TOOLS ONLY
FOR DIAGNOSTIC TOOLS ONLY
USBEXTENSION CABLE
1 M OBD CABLEwith adapter for
+12V power supply
CONTENT OF SUITCASEDIAGNOSTIC TOOLS | CHIPTUNING | KEYS
3
COMMUNICATION
INTERFACE
SERIAL NUMBERYou can find the serial number on the back side of your communication interface. Serial number is 5 digits number. It is necessary information for any communication with us.
PLEASE NOTE
ACTIVATIONYou must activate and regi-ster your communication in-terface first.
Fill in the required details in our online form at www.su-pervag.com (section ACTIVA-TION) and submit or contact your dealer.
The SuperVAG product registration and activation request will be completed in about one hour after com-plete information are recei-ved.
I. ACTIVATION
4
1. How to install SuperVAG?The easiest way to install SuperVAG is through our website or to use installation DVD from your SuperVAG suitcase.
■ go to website www.supervag.com■ select DOWNLOAD → LATEST VERSION
2.
3.
NOTE
DOWNLOADING■ select your software
■ choose your language■ click on DOWNLOAD button■ wait for downloading to your PC
or
INSTALLATION PROCESS■ when installation file downloaded,
you can run it by double click on setup file■ follow the instructions on your screen■ after completing the installation process,
you should restart your computer■ when you first run the SuperVAG,
it will display a form requesting your userinformation. Please fill in the form correctly.
If you have no internet connection, you can install your SuperVAG using installation DVD.
II. INSTALLATION
5
Before you start interface configuration please follow this instruction to connect to your PC and +12V power.
1.
2.
3.
Connect your interface to your PC using included USB cable.
NOTE Interface requires +12V power supply, the USB power is not sufficient. You have following options to connect your interface to +12V power.
A B
C D
using +12V power supplyand OBD to jack adapter
using +12V power supply and RJ to jack adapter
using +12V powersupply and OBD cable
or you can use OBD socket in a car and turn key into position 1
If your communication interface is powered correctly, green light on the interfaceis lit and you can proceed configuration.
III. CONNECTION
6
Connect your interface to your PC using included USB cable.
1.
2. 3.
NOTE
Run SuperVAG from your desktop
■ using for KEY installation
■ using for Diagnostic tools installation
PRESS CONFIGURATION BUTTONIf you have all four indicators bluepress INTERFACE CONFIGURATION button.
a
check this, if you are using Bluetooth device
b c dblue indicatorUSB connected correctly
yellow indicatorUSB is unavailable
solution:A) reinstall USB driversB) reconnect USB cableto another USB port
blue indicatorconnection to network available
yellow indicatorconnection to network is unavailable
solution:check your connection to network
blue indicatorInternet connection OK
yellow indicatorInternetconnection is unavai-lable
solution:check your Internet connection
blue indicatorSuperVAG servers available
yellow indicatorSuperVAG servers not available →→ contact SuperVAG helpdesk
IV. CONFIGURATION
7
1.
2.
How to contact HELPDESK and send log files?
Log files are automatically storeddata about diagnostics problem.
■ before contacting our HelpDesk tryto find some suggestions in theSuperVAG diagnostic help
■ for contacting our HelpDesk useenvelope icon on the left top corner
NOTE
YOUR CONTACT DETAILS
fill in customer information:■ your contact information■ choose question type■ choose date when problem reported■ enter up problem description
If log files can not be send it will be saved on your desktop. You can send it via email later.
[email protected] +420 539 013 184@Helpdesk
SuperVAG
Helpdesk
SuperVAG
V. HELPDESK
8
How to contact HELPDESK and send log files?
Log files are automatically storeddata about diagnostics problem.
■ before contacting our HelpDesk tryto find some suggestions in theSuperVAG diagnostic help
■ for contacting our HelpDesk useenvelope icon on the left top corner
YOUR CONTACT DETAILS
fill in customer information:■ your contact information■ choose question type■ choose date when problem reported■ enter up problem description
SuperVAG SOLUTION FOR ALL KEY LOST SITUATIONSVG149 and SVG157 are special designed add-on cables as a solutionfor all KEY lost situation without soldering.
• no soldering• no need to remove needles• no need for EEPROM programmer• only SuperVAG KEY and SVG 157 or SVG149 add-on cable needed
SVG149FOR NEC
SVG157FOR MICRONAS
Extra accessories can be found on www.supervag.com/en/products-2/key/
VI. EXTRA ACCESSORIES
9
©2015HR Carsoft s.r.o.Cichnova 23a624 00 BrnoCzech Republic
www.supervag.com